Müller-Mitteltal T3 Ng Tieflader 3-Achser Bpw Doppelbereifung nakup rabljenega (42.026)

Stanje: novo, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2026, * KA-TA-R 14.4: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * Drum brakes * 2 x 7 t Gigant axles * Parabolic leaf springs with tandem compensating aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front-right on chassis * 15-pin power connector * LED rear lights 12/24 V * Bolt-on side underrun protection * Plastic quarter mudguards * Tie-down hooks located at central locking mounts, plus 2 on the front wall * Chassis made of fine grain steel * Steel platform – 3-way tipper body with reinforced strong side walls (continuous upper side walls with internal tube reinforcement – without intermediate posts, side walls foldable with drop side spring assist) * Rear corner posts bolted Cgsdpfx Alox Hm Rij Hst * Combination steel wing-door rear wall – dual-wing asymmetrical, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping operation, locking via galvanised turning rod lock at the rear and central locking, deactivation function for automatic rear wall operation when tipping backwards with open door * Four 5 t lashing points in the corners, and four 3 t lashing rings recessed in the outer frame on each side * 4 mm steel floor made of fine grain steel * Mounting rail at rear for loading ramps * Reinforced body with cargo lashing certificate * 1 pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred & tracked vehicles * Lockable storage compartment at rear under load area recessed in chassis for the ramps * Drawbar, underrun protection, rear corner posts, and rear foldable supports hot-dip galvanized * Axles, springs, air tank and landing gear painted in black * Tyres: 358/55 R 19.5 * Drop sides painted in desired RAL color (no special or metallic finishes) – can be changed up to approx. 6 weeks before completion * Subject to errors and prior sale * Available immediately from calendar week 29/2026 * Example images

Stanje: rabljeno, lastna masa: 3.320 kg, največja dovoljena obremenitev: 10.180 kg, skupna masa: 13.500 kg, konfiguracija osi: 2 osi, prva registracija: 12/2003, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 5.040 mm, vzmetenje: jeklo, velikost pnevmatike: 285/70R19,5 148/145J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 285/70R19,5 148/145J, velikost zadnje pnevmatike: 285/70R19,5 148/145J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne ušesa, doplačilo za rampe: 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in drugih nepravilnosti, slike so simbolične --, Več podatkov na zahtevo!, Več podrobnosti: ! Cgodpfeyy I S Iex Al Hst

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector Codpevin T Sefx Al Hjgt * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: Cgsdpfovin Ucex Al Hst * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2010, 3-osni nizek priklopnik, dostopen od zadaj. Dovoljena skupna masa 30.000 kg, nosilnost 22.700 kg. Nakladalna površina 8.900 mm (7.000 + 1.900) x 2.550 mm, opozorilni paket za prekomerno širino, 12 pritrdilnih ušes ter 8 žepov za stebričke z možnostjo istočasnega pritrjevanja, 6 orodnih zabojev. Dvodelne hidravlične rampe cca. 2.100+2.000 x 800 mm z gumijasto oblogo, hidravlično zadnjo podporo. BPW osi, EBS, parabolično vzmetenje z izravnalno enoto, pnevmatike 235-75 R 17.5. Pokrivljena vlečna roka, premična vlečna kljuka 40+50 mm. 2-cevni zračni (duomatik) in 2-cevni hidravlični priključek, 24 voltov. Višina nakladanja praznega vozila cca. 910 mm. Barva oranžna. Tehnični pregled veljaven do 03-2027. = Dodatne informacije = Dimenzije pnevmatik: 235-75R17.5 Vzmetenje: parabolično vzmetenje Lastna masa: 7.300 kg Nosilnost: 22.700 kg Cedpfxey Evvle Al Hegt Skupna dovoljena masa: 30.000 kg Država proizvodnje: DE Za več informacij se obrnite na Jan-Marc Schwickert.

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW Eco axles * Air suspension with lift/lower system * SmartBoard as trailer infotool with pressure sensors for axle load display per axle group * Side underrun protection * Mechanically adjustable warning panels front and rear * Front axle: closed plastic mudguards; rear axle: straight galvanized steel skirts, each with spray protection Codpfx Ajq Dyvcol Hogt * Folding (hot-dip galvanized) lid for the toolbox on the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) mounted right side * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * Side marker lights with indicator function * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Rubber lining on folding ramps as well as on the access slope, left and right (approx. 860 mm long) * Rubber lining on the longitudinal beams from front to rear crossmember * Hardwood floor on the running surfaces of the low-bed platform * Each side with 4 stake pockets, with simultaneous 2-ton lashing capacity * Load securing package consists of: 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and integrated in the outer frame—in the corners 13.4 tons, elsewhere 10 tons * 6 pairs of mechanical folding outriggers for total width of 3 meters (not possible in rear slope) * Board holder under the loading area, lengthwise * Roller stop raised in front of front crossmember with 1 x 6.4-ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves * Hydraulic lateral ramp shift * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump flow in truck over 40 to max. 140 l/min) * Hydraulic control block splash-proof * Two-line hydraulics * Platform over kingpin: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm access slope) * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, bogie, roller stop, folding width extensions & loading ramps hot-dip galvanized * Axles, turntable, drawbar, air tank, etc. painted black * Loaded height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 20 of 2026

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as information tool on the trailer with pressure sensors for axle load display per axle group * Side underrun protection Cgjdpfx Aotplv Nel Het * Manually adjustable warning sign sets at front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel skirts, each with splash guards * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), mounted right side * 15-pin electric connector * LED lighting 12 / 24 V * Removable LED beacon at the rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment by tension spring & turnbuckle * Tire pressure monitoring system with display option in the truck cab via EBS signal (no in-truck installation required) * Rubber covering on folding ramps as well as on drive-up slopes left and right (approx. 860 mm long) * Rubber covering on longitudinal beams from front to end crossmember * Hardwood flooring on the running surfaces of the low-bed platform * Four stake pockets per side, each with 2 t lashing capacity * Load securing package consists of: 5 pairs of UVV-compliant lashing rings, tilting and retractable, loadable in all directions and recessed into the outer frame - in the corners 13.4 t, otherwise 10 t * Six pairs of manual folding extensions for 3 m total width (not at rear slope) * Plank holder under the loading platform, longitudinal direction * Raised roller stop before front crossmember with one 6.4 t lashing eye per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extended ramp tip and load-holding valves * Hydraulic lateral ramp shift * Hydraulically operated rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 l/min up to max. 140 l/min) * Hydraulic control block, splash-proof * Two-line hydraulic system * Loading area above slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm run-up slope) * Loaded loading height: approx. 890 mm +/- 20 mm (air suspension) * Chassis, turntable, roller stop, folding extensions & drive-up ramps hot-dip galvanized * Axles, slewing ring, drawbar, air tanks, etc. painted in black tone * Loaded loading height: approx. 890mm +/- 20mm * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 20/2026

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dolžina tovornega prostora: 85.000 mm, širina tovornega prostora: 30.000 mm, višina nakladalnega prostora: 30.000 mm, Leto izdelave: 2016, T3 Profile 30.0: Drum brakes, 3 x 10 t axles, lateral underrun protection, rear swing-down supports on the chassis frame, mechanically adjustable warning sign packages front and rear, folding lid for tool box on the bogie platform, 4 lashing eyes per side, 6 pairs of mechanical folding outriggers for a total width of 3 meters, widening planks stored in the middle of the loading area, hydraulic 2-part loading ramps, laterally adjustable, loading area over turntable: approx. 2,000 x 2,520 mm, loading height approx. 1,070 mm, rear loading area: approx. 6,500 x 2,520 / 3,000 mm, loading height approx. 910 mm (including 860 mm inclined ramp), technically possible gross vehicle weight: 30,000 kg, vehicle is hot-dip galvanized and as new. = Further information = Cgedsyz Ix Rjpfx Al Hot Weights Payload: 24,000 kg GVW: 6,000 kg Maintenance, History and Condition Number of owners: 1 Technical condition: very good Optical condition: very good More information Tyre condition front: 90% Tyre condition rear: 90% Front tyres: 235/75 R 17.5 Rear tyres: 235/75 R 17.5 Country of manufacture: DE For further information, please contact Bernd Strack.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Additional Options and Accessories = - Spare wheel - Twin tires = Notes = Cjdoxw T Uaopfx Al Hogt Müller Mitteltal 2-axle T5 2AL low loader with ramps Air suspension BPW axles ABS ZSA Tires 60% tread, GR 235R17.5 ID No.: 665 We look forward to welcoming you for consultation, contract signing or vehicle collection at our dealership. Please arrange an appointment in advance. If you are unable to visit us in person, we offer complete processing via phone/email/WhatsApp/fax. On request, we deliver your new vehicle directly to your door. This means you get the best price, maximum security, and convenience when buying your vehicle. Trade-in We are happy to take your used vehicle in part exchange. We offer the possibility of digital vehicle valuation based on your photos, even without visiting our dealership. Our specialized purchasing team offers you a guaranteed top price. On request, we will deliver your new pre-owned vehicle nationwide right to your doorstep and take your old vehicle back with us. Financing – Leasing Immediate approval and settlement of existing loans. Your specialist partner for cars, vans, commercial vehicles, and construction machinery. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrial area) Visit us on our website Always over 400 vehicles in stock The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may require separate verification; the offer is generally without new TÜV inspection, but we would be pleased to make you an offer through our partner workshop. Subject to errors and prior sale. = Additional Information = Unladen weight: 8,900 kg Payload: 26,100 kg Gross vehicle weight: 35,000 kg Sales price: €18,000, US$21,210

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign kits at the front and rear * Front: closed plastic mudguards, rear: straight galvanized steel mud flaps, each with splash guards * Contour marking tape, reflective, on sides and rear * Foldable (hot-dip galvanized) tool box cover on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets each side (no stakes included), also suitable for lashing * Load securing package consisting of: 2 lashing points (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame (13.4 t in corners, otherwise 10 t) * 6 pairs of mechanical folding outriggers for total width of 3 m (not in the rear slant) * Widening planks stored in the center of the loading area * Excavator arm support over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm support) * Mechanical one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp displacement * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach incline) Cgjdex Ipa Nspfx Al Het * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross technical weight of 30,000 kg possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle compensation * Side underrun protection * Rear swivel supports on chassis frame * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash protection * Contour tapes on sides and rear, reflective * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (no stakes present) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings - swiveling and retractable, loadable in all directions and integrated in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted laterally in the arm rest) * Mechanically operated one-piece loading ramps with spring assembly (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, tow bar, and loading ramps hot-dip galvanized * Axles, springs, air tank, etc., painted in black * 235/75 R17.5 twin tires * 5,900 kg curb weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized Codpfox Ipavjx Al Hjgt * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 17.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, naslednji pregled (TÜV): 01/2027, širina tovornega prostora: 2.500 mm, ? Hidravlične rampe ? Razširljive ? 8 pritrdilnih ušes na vsaki strani ? Nosilec za rezervno kolo ? Nakladalna višina: ca. 930 mm ? Bobnasta zavora ? Duomatski priključek ? Listnato vzmetenje ? Dvojna kolesa Cedpfsytz Hwsx Al Hsgt Vse informacije brez jamstva / Možen vmesni prodaj.

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (therefore B-dimension approx. 8,080 mm) * 40 mm flange towing eye ---- Electric / Lighting: * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated by reverse gear) * 1 removable LED beacon (incl. holder) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning sign sets front and rear * Landing gear at the front * External folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted to the left and right sides * Lateral underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable for 3 m container external width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN compliant) with an absolute external width of 3,000 mm. ----Cargo Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing force every 480 mm * Option to fit 3 t drop-in lashing rings every 600 mm - 5 x 3 t UVV lashing rings installed per side - * In each front and rear corner 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor and rear in the end cross member) * Various holes in the front and rear cross member for 1.2 t lashing points ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Storage compartment from the rear, recessed under the loading platform in the chassis Codpfx Alsv D Tbks Hsgt ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear, and flange towing eye painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from week 22/2026

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Braking system: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t BPW axles ----Suspension: * Air suspension with lift and lowering system Cgjdpfx Aev D Tbdjl Hst ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-dimension of approx. 8,080 mm) * 40 mm flange towing eye ---- Electrics / Lighting: * 15-pin electrical connector * LED lighting system 12/24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning panel sets front and rear * Support windlass at the front * Outward folding support legs at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each left & right side * Side impact protection * Underrun protection * Plastic quarter mudguards ----Platform: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not according to DIN) for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm * Optionally, installation of 3 t lashing shackles every 600 mm - each side equipped with 5 x 3 t UVV lashing shackles - * At each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wood floor and rear in the end crossmember) * Various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tyred and tracked vehicles * Rear accessible storage compartment underneath the loading platform, integrated in the chassis ----Painting: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front support windlass and flange towing eye painted in a shade of black ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery lead-time: * Available from CW 22/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Leto izdelave: 2010, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm, German trailer, second owner Technical Data Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading. Dimensions: - Gross weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread Features: - ABS/EBS connection according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer rails for container guidance, hot-dip galvanized - Container locking: The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails. - 2x 9t BPW 420 mm drum brake axles with air suspension - Air suspension with lowering function - Frame: welded steel construction - Brake system: two-line EBS-compliant (EU standard) - DUOMATIC coupling head - Spring-loaded parking brake - Electrics: 24 volts - Multi-chamber rear lights - 15-pin plug with connecting cable Cjdpfxjvg T Nye Al Hsgt - Lighting according to EU regulations - Rims: factory silver - Underrun protection: aluminum profiles - Wheel chocks with holders - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Delivery available at extra cost All information subject to change! Sale to businesses or for export only! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2008, naslednji pregled (TÜV): 03/2024, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 910 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, leaf suspension, 3 axles, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydraulic ramps, rear supports, side aluminum underrun protection, twin tires, storage box Body: Hydraulic ramps, extendable to 3m. BPW axles, drum brakes, lashing rings on the outer sides. Ramp length approx. 4000mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Cgjdpfx Aeqpgtmol Hjt

Stanje: rabljeno, lastna masa: 7.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 9.100 mm, širina tovornega prostora: 2.750 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: siv, Oprema: ABS, Bobnasta zavora Nosilnost 22.200 kg Gumijasta tla Hidravlične dvojne rampe in hidravlični pomik Gigant osi Csdpswh Rwvjfx Al Hegt Pridržujemo si pravico do napak

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles Cgodpjq Dyv Iefx Al Het * Parabolic springs * Mechanical axle equalizer at the rear * Side underrun protection * Swivel supports at the rear chassis frame * Mechanically adjustable warning plate sets at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel splash guards, each with spray protection * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar scissors with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included), also usable for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform * Five pairs of UVV-compliant swivel and retractable lashing rings * Loadable in all directions; embedded in the external corners of the frame: 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear slope) * Widening planks stored under the load area in a storage compartment * Digger boom tray above rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the tray) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulically lateral ramp shifting * Hydraulic flow divider in trailer (when truck hydraulic pump output above 40 l/min up to max. 140 l/min), twin-line hydraulics * Load area above turntable: approx. 1,960 x 2,520 mm * Rear load area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height: approx. 860 mm +/- 30 mm balance adjustment * Chassis, bogie, folding outriggers, drop supports at the rear and loading ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Availability from week 19/2026

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel packages front & rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted to the side under the chassis * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon (rotating warning light) at rear * Drawbar scissors with 40 mm towing eye and height adjustment via drawbar spring & turnbuckle * 4 stake pockets per side (stakes not included), with integrated lashing option * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV folding and lowering lashing rings * Loadable in all directions and recessed into the external frame; corner loads up to 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not at the rear taper) * Extension boards stored in a compartment under the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the digger stick rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable lateral ramp shift * Hydraulic flow divider in the trailer (suitable for truck hydraulic pump outputs over 40 ltr. up to max. 140 ltr./min), two-circuit hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm adjustment unit * Chassis, turntable, fold-out outriggers, rear drop legs and drive-on ramps hot-dip galvanized * Axles, springs, drawbar scissors, air tanks, etc. painted in black Csdpstplwfjfx Al Hogt * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from CW 19/2026

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl.: 8.200 mm, Nizkopodno pribl.: 6.000 mm dolgo, Nakladalna višina obremenjena pribl.: 890 mm, 22 x privezne ušesce po 10 t, 10 x žepe za stranice v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), plezalna letva na zunanji strani na rampi in zadnjem naklonu, nakladalne rampe nastavljive vstran, lesen pod 68 mm debel, skladiščna škatla s pokrovom za privezne verige ali napenjalne trakove, kontura označena po predpisih, opozorilna luč, vozilo vroče cinkano v potopni kopeli, vključno z indikatorji obremenitve osi, doplačila za: Opozorilne table z osvetlitvijo in opozorilno lučjo, razširitev na 3 m z lesenimi elementi, cena: 500 €, izrez za roko bagra, cena: 1.000 € neto. Napake pri tisku, spremembe in pomote so pridržane, vzorčne slike. Več podatkov na: !, Dodatne informacije: ! Cgsdpoy Niv Hsfx Al Hot

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Overall loading area length approx.: 8,800 mm, Lowbed approx.: 6,600 mm long, Loaded deck height approx.: 890 mm, 24 x lashing rings, each 10 t, 12 x stake pockets on the outer frame, Loading ramps (approx. 3,100 x 750 mm), Climbing strip on the outside at the ramps and rear slope, Loading ramps laterally adjustable, Wooden floor, 68 mm thick, Storage box with lid for lashing chains or tension belts, Conspicuity markings according to regulations, Rotating beacon, Vehicle hot-dip galvanized, incl. axle load indicators, Surcharges for: Warning plates with lighting and rotating beacon, Extension to 3 m with wooden inserts, Price: 500 € , Excavator arm recess, Price: 1,000 € net, -- Mistakes, errors, and changes excepted, sample pictures --, More data at: !, More details: ! Cjdpfx Alsy H A R Ss Hjgt

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Total loading area length approx.: 8,800 mm, low-bed approx.: 6,600 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing strips on the outside of the ramps and rear slope, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per legal requirements, rotating beacon, chassis fully hot-dip galvanized, incl. axle load indicators, surcharge for: warning signs with lighting and rotating beacon, widening to 3 m incl. wood inserts, price: €500, excavator boom recess, price: €1,000 net. -- Subject to misprints, errors, and changes, sample images only -- More data under: !, More details: ! Codpfx Aloyy Natj Hegt

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering function * Drawbar height adjustable by approx. 300 mm Codel Th Dfepfx Al Hogt * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring system with display option in the truck via EBS signal—no installation required on the truck side * 15-pin power connector * LED lighting * Front support winch * Rear external fold-out supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Provisions in front of the front wall and at the rear for retrofitting 20" container locks * Bolted front wall made from flat sheet * Trapezoidal-profile, drop-down steel side walls, centrally divided once * Sliding steel rear wall between the ramps, mounting bracket for storage inside in front of the front wall when not in use * Bolted rear post/stake * Perforated external frame, bent at approx. 45 degrees, with 2-ton lashing capacity every 480 mm * Installation of 3-ton folding lashing brackets possible every 600 mm—4 lashing rings installed on each side * 1 x 6.3-ton lashing ring at each of the front and rear corners * "Profifix" lashing rail centrally in the longitudinal axis for lashing options up to LC 3,000 daN * Various boreholes in the front and rear cross member for 1.2-ton lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach ramp approx. 860 mm * Chassis, drawbar, front wall, tailgate, fold-out supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted black * Side wall paintwork in an RAL color of your choice (excluding special or metallic paints), color can be changed up to approx. 6 weeks before completion * --Reinforced and certified body according to EN 12642 XL, incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from approx. calendar week 31 / 2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (Electronic Braking System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension with lifting and lowering device * Tow bar height-adjustable by approx. 300 mm * Tow bar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * 15-pin electrical connector * LED lighting * Front landing gear * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted on the front right exterior bulkhead * Side underrun protection * Plastic quarter mudguards Cgodpfxel Thvxo Al Hst * 50 mm softwood floor * Provisions for subsequent installation of 20" container locks in front of the bulkhead and at rear * Bolted smooth steel sheet bulkhead * Side walls made of trapezoidal-profile steel sheet, center-folding, divided once * Rear steel panel insertable between ramp mounts; storage inside at bulkhead when not in use * Bolted rear stanchions * Perforated outer frame approx. 45° angled, lashing points (2 t lashing capacity) every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm – four lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Profifix lashing rail along the longitudinal axis center, for lashing capacity up to LC 3000 daN * Various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear driving slope approx. 860 mm * Chassis, tow bar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, drawbar eye, and landing gear painted black * Side wall paint in desired RAL color shade (no special or metallic finishes), modifiable up to about 6 weeks before completion * -- Reinforced and certified bodywork according to EN 12642 XL, incl. load securing certificate -- * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from approx. week 31/2026

Stanje: rabljeno, prva registracija: 06/2011, skupna širina: 25.500 mm,