Meusburger 3-Achs-Semi 2 P. Radmulden-Hydr. Rampen nakup rabljenega (65.771)

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes Kdjdsl Th I Aepfx Ah Iot ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 27.940 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function, including RtR valve * Start assist for shunting, applied to first axle via EBS – no truck-side installation – when lift axle is raised +30 mm ride height * Smart-Board installed on trailer as an info tool, with pressure sensors for total axle load indication * Rear axle as self-steering axle with electro-pneumatic steering lock * Steering lock for trailing axle controlled from driver’s cab for maneuvering purposes via EBS (no truck-side installation) * 2" king pin * 1 lift axle * Side underrun protection * Front aluminium drop support legs and rear swing-down supports on chassis * Alcoa LVL One aluminium wheels * 15-pin electrical connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 2 LED work lights mounted on trailer sides – no truck-side installation * 7-pin power socket at rear for overlength lighting * Side marker lamps with indicator activation * Tyre pressure monitoring system with display in truck via EBS signal (no truck-side installation) Kdjdpfxjwh Hdxo Ah Iot * Mechanically adjustable warning sign sets front and rear * Straight steel fenders * Saddle platform with 45° bevelled front corners and front toolbox made of galvanized, powder-coated steel sheet (B = 2,480 x H = 500 x L = 665 mm), top hinged lid and side doors at the beveled corners * 400 mm aluminium side boards (RAL 9010 pure white) fold-down and removable, mounted laterally on the saddle platform * Rear wall –150 mm– slotted in * Tapered rear on the saddle platform to lowbed approx. 700 mm long with chequer plate covering and lashing bar at end for attaching aluminium ramps * Saddle and lowbed platform with 50 mm clamped wooden planks * Tear plate above the axles * Prepared for 3 mounting shafts under the saddle platform for optional aluminium ramps storage * Swing arm as a carrier for connection lines from truck to trailer * Load securing package consisting of: outer frame of the saddle platform with punched holes, 45° bent and hole-pattern for lashing devices (2 t lashing force per point, min. 480 mm spacing), side-mounted 2 x 6.3 t recessed lashing rings per side, 1 x 16.5 t lashing ring per side at incline from lowbed to saddle platform, 2 pairs 16.5 t lashing rings in lowbed (1x on longitudinal beams after the step, 1x above the centre axle beside longitudinal beam), side 3 x 13.4 t lashing rings per outer frame (1x at start of platform step, 1x start of ramp slope, 1x end of ramp slope), 3 x 10 t each side (2x between front wheel recess and 1st axle, 1x between 2nd and 3rd axle), 3 x 5 t per side screwed to the wheel recess outer frames (2 at front, 1 at rear recess) * Extended excavator arm trough from end of last rigid axle over steering axle to end cross member, continuous with internal reinforcement profile approx. W = 770 mm x D rear = 270 / D front = 170 mm; each side 2 x 6.4 t lashing rings in the arm trough * Each side two wheel recesses, 390 mm deep and 640 mm wide for transporting wheel loaders with wheelbase 3,000–3,590 mm, tyre diameter up to 1,760 mm – retractable covers – * Second retractable cover ...

Stanje: rabljeno, številka stroja/vozila: 202xxxx, Leto izdelave: 2002, Prosimo, navedite referenčno številko na zahtevo: 23156 Specifikacije: Model 2002 Ni odobren za uporabo v EU Zadnja odobritev za uporabo v EU velja do: 19.09.2024 Pomanjkljivosti in napake Predmet za popravilo Pnevmatike (glejte slike) Brez krmiljenja na 3. osi Pripravljen za dostavo Opis: Prodajamo nadgradnjo za tovornjak Maur, model 2002, s 3 osmi in kipnim polprikoličnikom, kot predmet za popravilo. Prodaja se kot predmet za popravilo, saj ni odobren za uporabo v EU in ima pomanjkljivosti in napake. Prodaja se v stanju, v katerem je, brez kakršnih koli jamstev. Pričakujte dodatne stroške. Pripravljen za dostavo. Tehnični pregled: Ne Odobritev za uporabo v EU velja do: 19.09.2024 Lastna teža: 11650 Skupna teža: 46000 Nosilnost: 34350 Širina: 255 Dolžina: 1095 Model: nadgradnja za tovornjak, 3-osni kipni polprikoličnik, predmet za popravilo Kdodozqnf Hopfx Ah Ist = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 5.400 kg, največja dovoljena obremenitev: 33.600 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 1.450 mm, prostornina tovornega prostora: 25 m³, skupna dolžina: 8.600 mm, skupna širina: 2.550 mm, skupna višina: 2.960 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, Rešitev za transport po meri Konfigurirajte svoje vozilo Fliegl po svojih zahtevah. Prikazano vozilo je primer. Proizvodnja in oprema potekata individualno po željah stranke. *Podvozje Varjena konstrukcija iz drobnozrnatega jekla, lahka izvedba, sedelna plošča z izmenljivim 2-palčnim kraljevim zatičem Patentiran ukrivljen sprednji zaključek Teleskopska noga na sredini, odklop s tovornjakom ni mogoč pri obremenitvi, v odklopljenem stanju mora vozilo stati nagnjeno nazaj. Zagozde za kolesa + nosilec Zložljiva zaščita proti podvleku Polovični blatniki Vgrajen nosilec blatnika, površina odbija kamenje Pršnik za zadnjo os v asfaltni izvedbi, pritrjen s tečajem na blatniku, z možnostjo obešanja zgoraj na blatniku, skrajšan blatnik Vlečna kljuka zadaj *Osi in vzmetenje Osi z disk zavorami, premer diska 430 mm Laser-merjenje podvozja/os za manjšo obrabo pnevmatik in porabo goriva Osi v terenski izvedbi, Zračno vzmetenje 1. os samodejna dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju Pocinkan mehanizem dvižne osi *Zavorni sistem Kodpfx Ahei Rix Ie Iodt 2-cevni pnevmatski zavorni sistem, barvno označene cevi za lažji servis. Vzmetna parkirna zavora 2 varna priključna ventila spredaj, brez povezovalnega voda EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Pozor: priklopno vozilo lahko vlečejo samo vlečna vozila, ki zagotavljajo učinkovitost ABS! z dvižnim in spustnim ventilom Sistem stabilnosti vožnje vozila *Kolesa in pnevmatike 385/65R22.5 Jeklena platišča, tovarniško srebrna "TPMS" po ECE R 141, prikaz preko zaslona v vlečnem vozilu, preko EBS, brez vgradnje v tovornjak *Elektrika 24 Volt, večkomorni žarometi, stranske rumene LED luči povezane z utripalkami "Utripajoče stranske luči" 2 bele pozicijske luči spredaj 2 belo/rdeči opozorilni luči zadaj 2 x 7-polni varni vtičnici spredaj, brez povezovalnega kabla *Hidravlika Visokotlačni cilinder max. 250 bar, s HDK vijačno spojko, fiksni del, NW 48 mm Upravljanje hidravlike preko priključka na tovornjaku *Korito Jekleno okroglo korito dizajn Stone Master iz visoko odpornega HB 400/450 jekla. Poševna sprednja stena z zunanjim hidravličnim pogonom in dostopom s sprednje strani. Membranska zadnja stena Zadnja stena kot nihajna loputa, zunanja z dvojnim kavljem zapiralom. 2 vijaka s krilnimi maticami spodaj ob straneh. Stranske stene neprekinjeno 4 mm debele, dno 4/5 mm debele, konstrukcija optimizirana za obrabo in težo, Korito v izolirani izvedbi, Fliegl Asphalt Profi Thermo, spredaj, ob strani, spodaj in zadaj izolirano s Fliegl Isotherm. Pokritje BASIC, pregrinjalo iz ponjave Delovni oder + dostop, priključna plošča za zrak/elektriko in zavoro z veliko prostornino za najboljšo uporabnost. Rolo ponjava za odlaganje na desni (FR), centralno zaklepanje na levi (FR) *Država homologacije/Tablice Nemčija Certifikat po EG 2007/46 Stabilnost nadgradnje po EN 12642 24/7 servisna telefonska linija Certifikat proizvajalca za termična vozila po RS 10 - 2013 pripravljeno za enovrstno nosilko registrske tablice Opozorilna tabla po ECE - 70 *Barva Okvir: DB 7350 Novagrau "10 let jamstva proti prerjavenju" Podporne noge pocinkane Korito/stranska ponjava: po želji RAL, enobarvno Rolo ponjava: RAL 7035 svetlo siva Toplotna izolacija na voljo tudi v BASICplus (pločevinasta obloga) in Premium (nerjaveče jeklo)!

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 06/2012, skupna dolžina: 12.040 mm, skupna širina: 2.550 mm, medosna razdalja: 8.750 mm, barva: oranžna, Leto izdelave: 2012, Oprema: ABS, - Zračna vzmetitev Konfiguracija osi Zadnja os 1: Največja obremenitev osi: 10.000 kg Zadnja os 2: Največja obremenitev osi: 10.000 kg Zadnja os 3: Največja obremenitev osi: 10.000 kg Teže Lastna teža: 9.590 kg Nosilnost: 32.410 kg Dovoljena skupna masa: 42.000 kg Vzdrževanje, pregled in stanje APK (tehnični pregled): veljaven do 01.2027 Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Identifikacija Registrska tablica: OL-69-SG 3-osni zračno vzmeteni priklopnik za težke tovoro, z 2 hidravlično krmiljenimi osmi Splošne informacije Ponujamo vam ta visokokakovosten in izjemno robusten 3-osni priklopnik za težke tovoro, ki je bil posebej zasnovan za profesionalni transport gradbenih strojev, kmetijskih strojev, dvigal, kontejnerjev in drugih težkih tovorov. Zahvaljujoč 2 hidravlično krmiljenima osama v kombinaciji s TRIDEC-ovim hidravličnim sistemom krmiljenja ponuja ta priklopnik izjemno manevriranje in opazno zmanjšanje obrabe pnevmatik. Priklopnik je v dobro ohranjenem originalnem stanju in je takoj pripravljen za uporabo. Tehnični podatki Tip: 3-osni priklopnik za težke tovoro Prva registracija: 26.06.2012 Osi: 3 Vzmetenje: popolnoma zračno Krmiljenje: 2 hidravlično krmiljeni osi Sistem krmiljenja: TRIDEC hidravlično krmiljenje Zaklep za kontejnerje: popolnoma opremljen z zaklepi Teže Tehnično dovoljena skupna masa: 42.000 kg Lastna teža: 9.590 kg Nosilnost: 32.410 kg Dimenzije Vrata (swan neck) Dolžina: 490 cm Platforma Dolžina: 695 cm Prostorna platforma je idealna za transport gradbenih strojev, viličarjev, bagrov, dvigal, dvižnih ploščadi, kontejnerjev in drugih težkih strojev. Oprema * 3 osi za težke tovoro * Polno zračno vzmetenje * 2 hidravlično krmiljeni osi * Originalni TRIDEC hidravlični sistem krmiljenja * Popolnoma opremljen z zaklepi * Robusten okvir iz visoko trdnega jekla * Optimalna porazdelitev teže * Zelo stabilna vožnja * Nizka nakladalna višina * Konstrukcija, ki je enostavna za vzdrževanje * Visoka evropska kakovost * Takoj pripravljen za uporabo Kjdpezxgk Rjfx Ah Iodt Prednosti Ta profesionalni priklopnik za težke tovoro prepriča s svojo visoko nosilnostjo in odličnimi vozilnimi lastnostmi. Hidravlično krmiljene osi omogočajo zelo majhen radij obračanja in hkrati zagotavljajo znatno manjšo obrabo pnevmatik. Tako je priklopnik odličen za ožja gradbišča, industrijska območja in mednarodni transport težkih tovorov. Polno zračno vzmetenje zagotavlja visoko udobje pri vožnji, optimalno stabilnost in ščiti tako priklopnik kot tudi prevoženi tovor. Zaradi prisotnih zaklepov lahko priklopnik uporabljate tudi za varno prevažanje različnih kontejnerjev, kar bistveno razširi možnosti njegove uporabe. Območja uporabe Idealno primeren za transport: * Bagrov * Viličarjev * Strojov za gradnjo cest * Dvigal * Dvižnih ploščadi * Kmetijskih strojev * Težkih industrijskih izdelkov * Jeklenih konstrukcij * Kontejnerjev...

Stanje: rabljeno, prva registracija: 02/2008, Leto izdelave: 2008, Schmidt Hagen SP/42/E/13,5-21,5 ∗3-osni plato polpriklopnik∗Krmilne osi∗ALCOA∗ !!! zelo dobro stanje !!! ● ABS ● Zračno vzmetenje ● Dvižni/spustni sistem ● Višina tal: 1.420 mm ● Alcoa - Dura Bright platišča Kedpfxsyutxzo Ah Iodt ● 3 x Mercedes osi z disk zavorami ● vse 3 osi so vodljive! ● Pneumatike: 385/55 R 22.5 ● Globina profila: 3/2 / 5/4 / 5/6 mm ● Skupna masa: 42.000 kg ● Lastna masa: 10.200 kg ● Nosilnost: 31.800 kg - nemški polpriklopnik - Tehnični pregled: na zahtevo in za doplačilo: NOVO! Napake in vmesna prodaja pridržane! = Dodatne informacije = Za več informacij se obrnite na Joannis Arpantzanis ali Kai Bühler.

Stanje: rabljeno, prevoženi kilometri: 435.294 km, moč: 250 kW (339,91 KM), prva registracija: 08/2011, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 08/2026, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2011, Oprema: ABS, dvižna zadnja plošča, klimatska naprava, parkirni grelec, Posebna oprema: tovornjak MAN TGX 18.340 4x2 BL, vključno z dvokolesno tandem prikolico. Vključno z zimskimi pnevmatikami. Letnik 2015. Tehnična dovolitev. Skupna masa 18.000 kg, uporabna nosilnost 8.270 kg. Izvedena popravila: §57a, vzdrževanje po načrtu vzdrževanja, menjava motornega olja in filtrov, obnovljen in očiščen filter za gorivo, nastavljeni ventili, obnovljen filter AdBlue, obnovljen filter za svež zrak, obnovljen filter za volan, obnovljena kartuša za sušilnik zraka, obnovljen priključek za zrak na motorju zavore, zamenjana desna zadnja stranska luč, odstranjena rja in konzervirana zračna posoda. Tovorna prikolica Scheuwimmer, tandem prikolica, letnik 2015, dvojna vrata zadaj, tehnična dovolitev, skupna masa: 18.000 kg, uporabna nosilnost: 14.160 kg, popravila: 02/2025: izveden pregled po §57a, zamenjana desna sprednja mejna luč, obnovljena sklopka – zaloge in zavora. Predal, priklopna prikolica: Ringfeder 4040 G 150B, antena za avtomobilski telefon, zunanja ogledala in širokokotna ogledala, električno nastavljiva in ogrevana, desno stransko ogledalo za opazovanje robnika, električno nastavljivo in ogrevano, pritrdilni kot za most, blokada diferenciala zadnje osi, udoben voznikov sedež, na zrak vzmeten in ogrevan, z oporo za ledveno področje in nastavljivim naslonom, rezervoar za gorivo: kombinirani rezervoar – 680 l dizla + 75 l sečnine (AdBlue), smernik zraka na strehi, ogrevan sušilnik zraka, dodatno ogrevanje Eberspächer Airtronic D2, zunanja zavesa proti soncu, vtičnica v kabini 12 V in 24 V, V – konstanten regulator (Bremomat), sprednja os VOK-09 ukrivljena, dodatne daljinske/meglene luči s funkcijo usmerjanja pri zavijanju. Dodatna oprema: Kdedpfx Aez Dmagsh Ist Konfiguracija osi: 4x2, ambientalna osvetlitev, ogledala za vstop/sprednji del, priklopna vtičnica 24 V / 7-polna, priklopna vtičnica ABS, sistem proti zdrsu (ASR), avdio sistem: radio MAN basic Line (radio / CD), baterija 175 Ah, krmilni računalnik MAN-Tronic, elektronski zavorni sistem MAN-Brakematic, motor EURO 5, kabina: z izolacijo Nordic, kabina: XLX, vzmetenje: listnate vzmeti / zračna vzmet, električni pomik stekel, sistem vžiga s plamenom, zatemnjeno vetrobransko steklo, generator 28 V 80 A, menjalnik 16-stopenjski – tip: ZF 16 S, dvižno streho (mehansko), karoserija/nadgradnja: šasi, gugalni vzvod – EVB zavora, avtomatska klimatska naprava, ogrevan filter za gorivo, volan z večfunkcijsko tipkovnico, dvignjen dovod zraka, kompresor zraka 1-valjni, 360 ccm, motor 10,5 l – 265 kW dizel, medosna razdalja 5500 mm, nosilec rezervnega kolesa za zadnjo os, diskovna zavora zadnje osi, diskovna zavora sprednje osi, stranska zaščita, zatemnjena stranska stekla zadaj, oblazinjenje sedeža / oblazinjenje: kvalitetna tkanina, zavesa proti soncu za vetrobransko steklo, zavesa proti soncu za stransko steklo, voznikova vrata, zmanjševanje škropljenja, stabilizator na zadnji osi, stabilizator sprednje osi, predal, dostopen od zunaj, upravljanje – tip kabine, TGX, okna vrat zatemnjena, podaljšek vrat za kabino, spodnja zaščita zadaj, spodnja zaščita spredaj, viskozna sklopka ventilatorja, centralno zaklepanje, dovoljena skupna masa 18,0 t.

Stanje: novo, največja dovoljena obremenitev: 27.760 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ----Suspension: * Air suspension with automatic lowering during the tipping process (for increased stability; can be deactivated for overhead pavers) ----Electrics / Lighting: * Smart-Board (lift and lowering system, lifting axle lowering, traction aid, odometer, axle load indicator, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General attachments: * Aluminium air tanks * Telescopic steel landing legs with plate foot (can only be unhitched when empty) * Enclosed plastic single mudguards * 4 m aluminium access ladder, stored on the right side over the mudguards * Folding underrun protection * Rear tow eye ----Chassis: * High chassis frame made of high-tensile fine grain steel, heavy-duty version ----Tipping body: * Semi-round steel rear tipper body, complete, made of STEELECT 450 steel -HBW 450- * Side walls with robust, continuous, inward-angled top belt * Outside access and aluminium platform in front of front wall ----Thickness of floor, side walls, front and rear wall: * Front and rear wall inclined * Front and rear wall 5 mm * Side walls 6 mm * Floor 8 mm, HBW 450 steel ----Hydraulic ram: * Front hydraulic ram with medium working pressure ----Hydraulic tailgate: * Overlapping hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminium ----Loading volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ----Paintwork: * Chassis painted RAL 7021 black grey * Tipping body RAL 9006 white aluminium ----General information: * --Technical gross weight of up to 39,000 kg possible-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: Kdsdpfew Eg Edjx Ah Iot * Available from week 11/2026

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 – Nizkotilni priklopnik, krmiljena/dvigljiva os, hidravlična rampa Oprema: zračna vzmetenje * Težna os * 1. os – dvigljiva * 3. os – krmiljena * Hidravlična rampa z dodatno oporo in radijsko upravljalnikom * Rampa za prevoz vozil * Električni vitel z radijskim upravljalnikom * Edscha ponjava * Predali na obeh straneh * Rezervno kolo, primerno za vožnjo * Dodatne luči * Izvlečne table za nadstandardno širino Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do sprememb in napak. Kdedpfowfwd Djx Ah Ist Interna številka vozila: 8303

Stanje: rabljeno, prevoženi kilometri: 766.400 km, moč: 324 kW (440,52 KM), prva registracija: 12/2010, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, zavore: retarder, barva: zelen, vrsta prenosa: mehanski, emisijski razred: Euro 5, Leto izdelave: 2010, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Crane semi-trailer truck MAN TGX 26.440 6x2 Euro 5 EEV with retarder and dual-circuit hydraulics Semi-trailer Meusburger MPS-2 with steered axles, equipped with Palfinger PK 26002 crane (3 hydraulic extensions): lifting capacity 5,700 kg at 4 m, 2,250 kg at 10 m, radio remote control Condition: minor rust spots, otherwise very good; technically very good Tyres: 80-90% remaining tread Ksdpfx Ahoqnqw Aj Iodt

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks Kdodpfsza A Txex Ah Iot 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminium

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us. Kdjdpex Efzusfx Ah Ijt

Stanje: rabljeno, največja dovoljena obremenitev: 32.040 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2014, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 75 m³, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2014, Oprema: ABS, * Orten SafeSerfer 2 v 1 * SafeSerfer, pločevinasta stranska stena na levi strani, zavesa na desni strani * Certificirano po standardih DEKRA VDI 2700 in DIN EN 12642, koda XL * Certifikat za prevažanje pijač * Certifikat za prevažanje točene pijače * Certifikat za kemikalije (IBC) * Certifikat za prevoz odpadnega papirja * 1 vrsta pritrditvenih elementov za tovor s 2 prečnimi palicami * 2.000 kg, Bär, dvižna stranska stena * Osnova SAF * Dvižna os * Drsna streha Edscha * Kamera za vzvratno vožnjo Kdjdpfezxkavox Ah Ist * Pritrdilne točke na zunanjem okvirju

Stanje: rabljeno, največja dovoljena obremenitev: 32.040 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2014, dolžina tovornega prostora: 13.720 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.200 mm, prostornina tovornega prostora: 75 m³, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Leto izdelave: 2014, Oprema: ABS, * Orten SafeSerfer 2 v 1 * SafeSerfer, pločevinasta stranska stena na levi strani, zavesa na desni strani * Certificirano po standardih DEKRA VDI 2700 in DIN EN 12642, koda XL * Certifikat za prevažanje pijač * Certifikat za prevažanje točene pijače Kdedpfx Ahezxkbgs Ist * Certifikat za kemikalije (IBC) * Certifikat za prevoz odpadnega papirja * 1 vrsta pritrditvenih elementov za tovor s 2 prečnimi palicami * 2.000 kg, Bär, dvižna stranska stena * Osnova SAF * Dvižna os * Drsna streha Edscha * Kamera za vzvratno vožnjo * Pritrdilne točke na zunanjem okvirju

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area Kdedpfeup U Hzsx Ah Ist - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: Kdedey Up S Sopfx Ah Ijt * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/1997, Oprema: ABS, Goldhofer 3-axle special semi-trailer / long material transporter Type: SPZ-DL 3-38/80 Permissible gross weight: 48,000 kg Permissible front axle load: 18,000 kg Permissible rear axle load: 30,000 kg Air suspension + 3 x steering axles Overall length: 20,500 mm ! German registration ! Further dimensions can be found in the technical drawing, which can also be provided on request in high-resolution PDF format. Ksdezt T Rmjpfx Ah Iedt ! Further details available upon request via email ! All information subject to change/errors excepted! Details provided on the internet are non-binding descriptions and do not constitute guaranteed features. The seller is not liable for errors, input mistakes, or data transmission errors. Specifications subject to change. We continuously purchase and sell as well as accept trade-ins and offer rental of crane and lifting vehicles, as well as construction and heavy-duty vehicles.

Stanje: rabljeno, številka stroja/vozila: W09NTG2385EN1xxxx, Leto izdelave: 2005, Prosimo, navedite referenčno številko na zahtevo: 23133 Specifikacije: 2 osi Dvižna os na 1. osi Krmiljenje na 2. osi Prisilno krmiljenje Lastna masa: 7.220 kg Takoj na voljo Opis: HRD Jumbo polpriklopnik s prisilnim krmiljenjem. Takoj na voljo. TÜV: Ne EU homologacija do: 23.11.2025 Lastna masa: 7.220 kg Skupna masa: 38.000 kg Širina: 247 cm Dolžina: 1.027 cm Ksdpfxozqqn Ro Ah Iodt Model: 2-osni jumobsemi. = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 06/2022, prostornina tovornega prostora: 23 m³, Oprema: ABS, Kempf 3-osna prikolica, Hardox, 23 m³, aluminijasta platišča, dvižna os, električno pomično nadstrešek Na kratko: · Prva registracija: 10.06.2022 · Barva: Rumena · Barva ponjave: Modra · Lastna teža: 6.140 kg · Pnevmatike: 385/65 R 22,5 · Opomba: Takoj na voljo Posebna oprema: · Trioosna prikolica s kipno nadgradnjo · Električno pomični nadstrešek Caramaro · 23 m³ · Dvižna os · BPW osi · Aluminijasta platišča (Alcoa Dura-bright) · 4 x LED vzvratne luči · Aluminijasta lestev · Vibrirajoče dno · Samodejno spuščanje pri kipanju · Nosilec za lestev + lestev · Nosilec za metlo in lopato + metla in lopata · Aluminijaste podpore · 2 kavlja za zaklepanje · Hidravlični cilinder · Bobnaste zavore · 1 x 15-polni + 2 x 7-polni električni priključek · 3 x orodjarna omara · Konturna označitev · A nalepka · Zaščita pod vozilom, zložljiva Serijska oprema: · 2 klini z nosilcem · ABS · EBS · Zračna vzmetitev · Naprava za dvig in spuščanje Ksdpfxjzth Nws Ah Isdt Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Prodajalec si pridržuje pravico, da odstopi od prodaje. Avtorske pravice: Vse besedilo, slike in videoposnetki v tej oglasu so avtorska last STARENT Truck & Trailer GmbH. Uporaba, razmnoževanje ali nadaljnja distribucija – tudi delna – brez izrecnega pisnega soglasja ni dovoljena. _____ Interna številka za povpraševanja: TR26226 _____ STARENT Truck & Trailer GmbH, Bruck 49, A - 4722 Peuerbach Kontaktne osebe za prodajo: Ing. Wimmer Christoph (nemščina, angleščina, češčina, poljščina, italijanščina) p: WhatsApp t: @: Mehmet Terzi (nemščina, turščina, angleščina, ruščina, ukrajinščina, bošnjaščina, srbščina) p: / WhatsApp t: -104 @: Elias Höfler (nemščina, angleščina, bolgarščina, bošnjaščina, srbščina) p: / WhatsApp t: -123 @: Govorimo 13 jezikov. Zagotovo tudi vaš. Kontaktirajte nas! Spletna stran: / Facebook: / Instagram: / Starent Truck & Trailer GmbH odkupuje vaša gospodarska vozila, kot so tovornjaki, prikolice, tovornjaki in kombiji. Kontaktne osebe za odkup: Michael Doblhofer (nemščina, angleščina) p: WhatsApp t: -102 @: Bastian Wagner (nemščina, angleščina) p: WhatsApp t: -103 @:

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Kdedpfey Ercbjx Ah Iot Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, prva registracija: 12/2018, Leto izdelave: 2018, SCHMITZ CARGOBULL SCB*S3T 24/L SPECIAL – STANDARD – Prikolnica s platneno nadgradnjo/z zložljivo streho !!RAZŠIRLJIVA!! !!MEHANSKA ZLOŽLJIVA STREHA!! !!2 x DVIGALNA OS (1. in 3. os) !!SSR: SCHMITZ – VARNOSTNA STREHA!! !!ŽEPI ZA LATE!! !!ODLIČNO STANJE!! • ABS / EBS • Kolutne zavore • 3 x vzmetene SCHMITZ 9-tonske osi • Sistem za dvigovanje/spuščanje • 2 dvigalni osi • SCHMITZ – Varnostna streha Kedpfxszracgj Ah Isdt • zelo dober leseni pod! • Dokumentna torba • Vrata tipa portal na zadnji strani • Sistem za pritrditev tovora, skladno s standardom ISO 12642 – XL • Električni priključek, skladno s standardom ISO 12098 • Predal na levi strani • Notranje mere: 13.620 x 2.490 x 2.800 mm (D x Š x V) • Največja dovoljena masa: 36.000 kg (tehnično možno 39.000 kg!) • Lastna masa: 7.111 kg • Jeklena platišča • Pnevmatike 385/65 R22,5 • Globina profila pnevmatik: 15/14 15/8 8/9 mm - nemška prikolica! - 1 lastnik! - Tehnični pregled / pregled kartice za tahograf: opravljen! Pridržujemo si pravico do sprememb in napak!

Stanje: rabljeno, skupna masa: 36.000 kg, prva registracija: 07/2020, - Pogon na zadnjo os – dvižna zadnja os – pomična pokrovna plošča – hidravlično zadnje nakladalno dno. Kdsdpfx Ahez Af D Re Iot

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs Kdedperczm Dofx Ah Iot * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning plate sets front & rear * Contour tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon rear * 24 V - 15-pin and additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, continuously height-adjustable * Powder-coated steel toolbox and spare wheel holder, basket design, right side * Front closed single plastic mudguards * Rear straight steel mudflaps, each with spray suppression (anti-spray) * Side underrun protection * Extended offset bend by 500 mm to the front * Turntable platform extension at the front by 520 mm with 45° corners and 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine-grained steel * Decking above turntable platform from 50 mm softwood and on low loader platform from 60 mm softwood * Outer planks of loading ramps made from 50 mm bamboo wood * Four stake pockets per side (but no stakes included), each with a 2 t lashing point * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; front and rear, one pair of lashing rings (13.4 t) each on outer frame; four pairs of swivel and lowerable lashing rings (10 t) per side, loadable in all directions and integrated in the outer frame; two pairs of lashing rings (6.4 t) per side in excavator stick recess; eight pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored on the left side in stowage compartment * Excavator stick recess above rear axle up to end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp movement on slide pipe from ramp shaft * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps and mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 31.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2011, Oprema: ABS, Int. št.: B - 05 Po naročilu stranke *Meusburger * MTS - 2 * Nizkopodno prikolico * Kolesne vdolbine * Hidravlične rampe * BPW osi Dobro stanje Kdjdpfxezcicrs Ah Iot Možen je odkup staro za novo Financiranje od 3,99 % Pridržujemo si pravico do napak in predhodne prodaje! Podatki v tem oglasu so nezavezujoči opisi in niso zajamčene lastnosti. Prodajalec ne prevzema odgovornosti za tipkarske ali prenosne napake. Oprema, navedena v oglasu, mora biti preverjena posebej. Vse navedbe v oglasih so nezavezujoče! Dostava po celotni Nemčiji na zahtevo Delovni čas: ponedeljek do četrtek od 9:00 do 17:00 Petek od 9:00 do 14:00 in po dogovoru!

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/1999, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.750 mm, Kempf Kiper Polpriklopnik - Tip: SK34/3 - Dvostranski kiper - Aluminijaste stranice - Bobnaste zavore - LED zadnje luči - Tehnični pregled (SP) potreben: 10.2024 Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 10581 WhatsApp podpora na voljo! Kodpfx Ahsvv Dkae Iodt Za vprašanja o vozilu ali dodatne informacije nas kontaktirajte preko WhatsAppa.