Odprta polprikolica

Fliegl 3-Achs Jumbo Sattelauflieger Plateau

Chassis, semi-trailer, forwarding version
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin
Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks
24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment
Blodpfx Asza A Txsb Tjh
Free landing leg corner dimension or free rear swing radius approx. 1920 mm
2 wheel chocks with holders
Side underrun protection, aluminium
Rear underrun protection, steel
Quarter-shell mudguards in front of and behind each axle
Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC
1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included)
Axles + Suspension
SAF drum brake axles
"Axles/chassis laser alignment" reduces tyre wear and fuel consumption
Air suspension
1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h)
Axle lift below recommended driving height, therefore no warranty for tyre damage
Brake system
2-line compressed-air brake system
Colour-coded line routing for easy servicing
Spring-loaded parking brake
2 fail-safe coupling heads at the front, without connecting line
EBS electronic braking system with EBS socket at the front, without connection cable
Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS!
With raise & lower valve
Vehicle dynamic stability system
Wheels and tyres
235/75 R17.5, brand according to manufacturer's choice
Steel rims, factory silver
Electrics
24 V, multi-chamber lamps, yellow LED side marker lamps
2 white marker lamps at the front
2 white/red lane marker lamps at the rear
2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable
Floor
Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg
Front wall / front corner posts
25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design
Country of registration / plates
Germany
With Dekra inspection and certificate (according to §13 EC FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear
Paintwork
Frame: DB 7350 Novagrau
Front corner posts: hot-dip galvanized
Front wall: aluminium

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.