Max Trailer 4-Achs-Tele-Semi-Zwangsgelenkt nakup rabljenega (54.859)

Stanje: novo, največja dovoljena obremenitev: 49.000 kg, skupna masa: 60.800 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with front corners chamfered at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Extendable Loading Platform: - Loading platform, extendable design with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker-plate covering above the axles Two-Part Removable Ramps: - One pair of galvanized two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting mechanism, and hydraulic side-shift - Maximum load per pair: 40,000 kg Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, two fixed axles and two steering axles (self-steering), air suspended, with drum brakes, raise/lower function - Self-steering axles with electro-magnetic reverse lock, can be activated by reverse gear or manually Gedpfxjh Etf Ro Af Rjug - Axle tool kit - Tyre size 235/75 R 17.5 Brake System: - Braking system according to EU regulations with EBS-E (4S3M) Steel Structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Paintwork: - First-class, long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-tone topcoat using 2-component (2K) paint in Nova grey Electrical System: - Electrical system according to EU regulations, 24 volt lighting, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connector strip with 24N, 24S, and 15-pin sockets Included Accessories: - 2" kingpin - Galvanized steel front wall, approx. 400 mm high - One spare wheel with holder in front of the headboard - Yellow-red air couplings on the galvanized front connector strip - 4 wheel chocks with holders on the front wall - Mount at the rear section of the gooseneck for ALU approach ramps - Galvanized folding supports underneath the loading platform chamfer - One holder for warning beacon - Cover plates to bridge the gap between ramps and loading platform - White reflective tape on the side, red on extension and rear, according to EU regulations - Electro-hydraulic power unit - At the gooseneck and ramps (left/right) a holder each for warning signs including socket - Control valves for the ramps mounted on the right side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the gooseneck, plug-in ALU side boards and rear wall approx. 2,440 x 400 mm - Rear galvanized plug-in stakes are removable (body length approx. 2,560 mm) - 4 pairs of WADER container pockets in the loading platform for one 20ft, two 20ft or one 40ft container - 7 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading platform - Galvanized, extendable platform wideners approx. 230 mm per side - Lift axle on the front axle with control system - 20 x 20 mm square climbing bars - BEKAMAX central lubrication system - Four warning signs extendable by approx. 400 mm eac

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: Gedpfok Eammsx Af Rsug BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: rabljeno, številka stroja/vozila: YF9TTS3LL2201xxxx, Leto izdelave: 2002, Prosimo, navedite referenčno številko na zahtevo: 24246 Specifikacije: Letnik modela: 2002 Zadnja veljavnost odobritve EU: 05.06.2024 3-osno vozilo Polno odpiranje bočne strani Vozilo, ki zahteva popravilo Lastna teža: 8640 kg Dovoljena skupna masa: 42000 kg Gedpfxszyrlce Af Rjug Napake in pomanjkljivosti Pripravljeno za dostavo Opis: Imamo prikolico Ekeri L3 iz leta 2002 s polnim odpiranjem bočne strani. Prodaja se kot vozilo, ki zahteva popravilo, ker ni odobreno za uporabo v EU. Ima napake in pomanjkljivosti, zato je treba računati na dodatne stroške. Pripravljeno za dostavo. Prevoženi kilometri: 1 Tehnični pregled: Ne Odobreno za uporabo v EU do: 05.06.2024 Lastna teža: 8640 Skupna teža: 42000 Nosilnost: 33360 Model: L3 prikolica s polnim odpiranjem bočne strani = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Gujdpfx Afok Ahuge Rsg Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: rabljeno, skupna masa: 58.000 kg, konfiguracija osi: > 3 osi, prva registracija: 05/2007, Oprema: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth-Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Unladen Weight: 11,020 kg German MOT (HU) due Neck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm = Fifth-Wheel King Pin 3.5 inches Lowbed: Length: 9,400 mm, including 500 mm sliding table (600 mm of which is tapered) – Width: 2,525 mm – Loading Height: 880 mm TELESCOPIC EXTENSION by 6,300 mm EXTENDABLE WIDTH up to 3,000 mm Removable Rails Technical Axle Loads: 4 x 10,000 kg SAF Axles with Drum Brakes Axle 3,4 = SELF-STEERING AXLES Large Tool Box on the Gooseneck Gjdpsy T Aq Eefx Af Rsug Central Lubrication System Tires: 245/70 R 17.5 Modifications, sale prior to conclusion of purchase, and errors are expressly reserved. The above description is provided for general identification purposes only and does not constitute a warranty under the law of sale. The description in the purchase contract is decisive. Our offer does not generally include a new TÜV (MOT) inspection. If a new inspection is required, we are happy to provide a quote from one of our partner workshops! The vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin Guedpfx Ask Aht Ujf Rjg - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring Godpeiu Etrsfx Af Rsug • 7 pairs of external folding lashing rings (LC 5,000 daN) • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Izpisek opreme Gooseneck prikolica * s poševnimi robovi spredaj, približno 45° in s poševnim zadnjim delom, približno 750 mm x 10° Godpfszlwm Njx Af Roug * 3 pari pritrdilnih obročev (LC 5.000 daN) * trda lesena obloga, debeline približno 30 mm Tovorilna ploščad * v dvojni izvlečni izvedbi s poševnim zadnjim delom, približno 500 mm x 8° * 6 parov pritrdilnih obročev, ki se zlagajo navzven (LC 5.000 daN) * 4 pari pritrdilnih obročev, ki se zlagajo navzven (LC 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno na sprednji strani tovorilne ploščadi (LC 10.000 daN) * 1 vmesna miza, približno 250 mm * trda lesena obloga, debeline približno 48 mm, nad osmijo obloga iz valjane pločevine * izrezi v zunanjem okvirju tovorilne ploščadi za obešanje napenjalnih trakov (LC 2.000 daN) Osi * BPW osi in vzmetenje, vse osi hidro-mehansko sinhronizirane * maksimalna tehnična obremenitev osi: 12.000 kg na os * zračno vzmetenje z ventilom za dvig in spuščanje * orodje za osi Pnevmatike * 245/70 R 17.5, indeks nosilnosti (146/146 F) * proizvajalec po naši izbiri Podporne noge * JOST podpore (mehanske) z dvostopenjskim menjalnikom za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna sistem * v skladu z direktivami EU, z EBS-E (2S2M) brez priključnih kablov do vlečne enote Barvanje * vrhunsko in dolgotrajno protikorozijsko zaščito standardno kroglično peskane jeklene konstrukcije zagotavlja dvokomponentna (2K) temeljno prevleka s cinkovim prahom * vrhunska dvokomponentna (2K) * zaključna barva, enobarvna, v RAL 3002, karminsko rdeča * zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * kvalitete jekla: S355J2+N/S355MC (meja tečenja 355 MPa) S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU * razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na sprednji priključni letev z vtičnicami 24N, 24S in 15-polno * priključki v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098 Vključno z naslednjo dodatno opremo * 2 palčni kraljevi člen (King pin) * pocinkana jeklena sprednja stena, približno 400 mm visoka * rumeno-rdeči zračni spojniki na pocinkani sprednji priključni letvi * 4 kosi zavorne podloge z nosilcem na sprednji steni (± 5 kg) * nosilec za rezervno kolo pred sprednjo steno * elektro-hidravlična enota (± 45 kg) * naknadno usmerjanje od spredaj in zadaj s pomočjo kabelskega daljinskega upravljanja, upravljanje z gumbi, z nadzorom osi (brez vgradnje v vlečno enoto) * nosilec na zadnjem delu gooseneck prikolice za aluminijaste nakladalne rampe * evropski reflektorski znaki (rdeče-rumeni) na zadnji strani prikolice * rumeno reflektorsko trakom v skladu z direktivami EU, stransko, na izvlečni strani in na zadnji strani prikolice * na gooseneck prikolici in na zadnji plošči, na levi in desni strani, nosilec za opozorilne table, vključno z vtičnico * priključna letev za aluminijaste nakladalne rampe na zadnji strani vozila * nosilec za okroglo rotacijsko luč na zadnji strani prikolice * pocinkane zložljive podpore pod poševnim delom tovorilne ploščadi * zaščitnik blatnikov na zadnji strani prikolice * navodila in opis na USB-ključu * nalepka za omejitev hitrosti 80 km/h na zadnji in na obeh stranskih straneh * manometer za obremenitev osi za ugotavljanje obremenitve osi, vključno s diagramom obremenitve.

Stanje: novo, največja dovoljena obremenitev: 48.930 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, Oprema: ABS, Celotno zalogo vozil, vključno z vozili, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Gooseneck" prikolica * s poševnimi robovi spredaj, približno 45° in z zadnjim poševnim robom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm Tovorilna površina * dvodelna, izpodvlačna izvedba z zadnjim poševnim robom, približno 500 mm x 8° * 5 parov pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 5.000 daN) * 4 pari pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče na sprednji strani tovorilne površine (nosilnost 10.000 daN) * 1 vmesna miza, približno 250 mm * izrezi v zunanjem okvirju tovorilne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmi je valjasta kovinska obloga Osi * osi BPW, hidravlično-mehansko sinhronizirano krmiljenje * tehnična nosilnost osi: 12.000 kg na os * zračna vzmetenje z ventili za dvig in spuščanje Pnevmatike * 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) * TPMS sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Opore sedla * JOST opore sedla (mehanske) z dvostopenjsko prestavo za približno 24 t nosilnosti (približno 50 t testna nosilnost) Zavorna naprava * v skladu z direktivami EU z EBS-E (4S3M) Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * vrste jekel: S355J2+N/S355MC (meja tečenja 355 MPa) * S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU, osvetlitev 24 voltov ASPÖCK-NORDIK (ASS3) * vse LED stranske markerne luči utripajo sinhronizirano s smerniki Godpfx Afjzlwm Ae Rsug * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15-polni priključek, v skladu s standardom ISO. 24N ISO-1185 24S ISO-3731 15-polni ISO-12098 Barvanje * celotna jeklena konstrukcija, po varjenju, avtomatsko peskana z metodo vrtinčenja * drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega podvozja vozila z ZINACOR 850 (85% cink/15% aluminij) za zagotovitev najboljše zaščite proti koroziji * končna barva z 2 plastma 2K-lak, enobarvno, v RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * platišča v srebrni barvi. Zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče * test barvne strukture izveden v testu meglenega spreja s soljo, v skladu s standardom ISO 9227-NSS * zaščita notranjih prostorov s posebnim voskom Vključno z naslednjo dodatno opremo 2-palčni kraljevi vtič * elektro-hidravlična agregat (± 45 kg) * dodatno krmiljenje od spredaj in od zadaj s kablom, upravljanje s pritiskovnimi gumbi, z nadzorom posameznih osi (brez vgradnje v centralno krmilno enoto) * na "gooseneck" prikolici in na zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico * držalo za okroglo luč na zadnji strani prikolice * na "gooseneck" prikolici aluminijaste stranske stene in zadnja stena, ki se lahko vstavi, približno 2.440 x 400 mm (D x V) * zadnje pocinkane stranske stene se lahko odstranijo. (dolžina nadgradnje, približno 2.560 mm) (± 46 kg) * orodjarna omara, pocinkana, integrirana v poševno "gooseneck" prikolico (± 47 kg) * 4 pari WADER žepov za zabojnike na tovorilni površini za 20', 2x 20', 40' ali 45' zabojnik (± 40 kg) * 7 parov žepov za stranske stene, približno 100 x 50 mm

Stanje: rabljeno, prva registracija: 04/2016, Leto izdelave: 2016, MEUSBURGER – Prikolice z nastavljivo širino / prikolice z "labe podvozjem" – specialne prikolice za transport strojev širina se lahko hidravlično prilagodi do 5 m!! možna notranja višina 3,5 m!! • Letnik: 2016 • Širina prikolice je električno-pnevmatsko nastavljiva do 5 metrov • ni potrebna hidravlična naprava na vozilu – vozilo ima električno-pnevmatsko črpalko! • notranja višina: 3.250 mm (možna 3.730 mm!) • zunanje mere: 13.810 x 2.550 x 4.000 mm • notranje mere: 13.480 (labe podvozje 3.480 mm + nizkopodna ploščad 10.000 mm) x 2.490 x 3.250 mm • EDSCHA – pokrov • električno/hidravlično dvižna streha • eloksiran/pocinkan okvir! • vodila za pritrditev tovora • 2 x tirnice za pritrdilne točke na straneh • 2 x tirnice za pritrdilne točke na sredini • 2 x 9 zložljivih pritrdilnih obročkov na straneh na nizkopodni ploščadi • 2 x 4 pritrdilni obročki na labem podvozju • 4 x dvojne pnevmatike in BPW – ECO PLUS osi s zračno vzmetjo • električno nastavljivo sled • kolutne zavore • ALU – platišča • 1. os je dvigljiva • 3. + 4. os sta vodljivi – s trenjem priključenimi tečaji! • pnevmatike: 205/65 R 17.5 • profil pnevmatik (na os): 10/10/11/10; 10/7/11/10; 6/6/10/11; 9/10/8/7 mm • BEKA – centralni sistem za mazanje • največja dovoljena masa: 38.800 kg • lastna masa: 11.250 kg • nosilnost: 42.000 kg - nemška prikolica! - REDNO SERVISIRANA: vsa vzdrževanja in popravila so bila opravljena v specializirani delavnici! - 1. lastnik! - tehnični pregled/izpust plinov po želji in ob dodatnem plačilu: nov! Pridržujemo si pravico do sprememb in napak! = Dodatne informacije = Guedpfx Aszy Adpsf Rsg Lastna masa: 11.250 kg

Stanje: rabljeno, številka stroja/vozila: YG9511006A303xxxx, Leto izdelave: 2010, Prosimo, navedite referenčno številko ob povpraševanju: 22145 Specifikacije: Ni odobreno za EU Letnik 2010 Zračno vzmetenje Pnevmatike (glejte fotografije) HMF dvigalo Dolžina: 13,60 m Širina: 2,55 m Medosna razdalja: 136/225 cm Lastna teža: 9.500 kg Orodna omara Opis: Polpriklopnik Tyllis jumbo, letnik 2010, z HMF dvigalom. Priklopnik je bil nekaj let parkiran in ni odobren za uporabo v EU. Dvigalo je delovalo ob zadnji uporabi, trenutni stanje ni znano. Na voljo je za hitro dostavo. Gujdpfjzqqtmsx Af Reg TÜV: Ne EU odobritev do: 03.02.2024 Lastna teža: 9500 Skupna teža: 45000 Nosilnost: 35500 Širina: 255 Dolžina: 1360 Model: jumbosemi s HMF dvigalom = Več informacij = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, številka stroja/vozila: YX9SET3460801xxxx, Leto izdelave: 2010, Prosimo, navedite referenčno številko na zahtevo: 23157 Specifikacije: Model 2010 Ni odobreno za EU Zadnja odobritev za EU do: 28.04.2025 Guedpfxszqnc Ss Af Rog Predmet za popravilo Pnevmatike (glejte slike) Ročica na 1 osi Podporno vrtenje na 3 osi Zadnja luč Pripravljeno za dostavo Opis: Imamo na prodaj nadgradnjo za tovornjak Maur, model 2010, s 3-osnim kipnim priklopnikom, ki je predmet za popravilo. Prodaja se kot predmet za popravilo, ker ni odobreno za EU in ima napake in pomanjkljivosti. Za ponovno uporabo so potrebni dodatni stroški. Pripravljeno za dostavo. Prevoženi kilometri: 1 Tehnični pregled: Ne Odobreno za EU do: 28.04.2025 Lastna teža: 11570 Skupna teža: 46000 Nosilnost: 34430 Širina: 255 Dolžina: 1120 Model: nadgradnja za tovornjak, 3-osni kipni priklopnik, predmet za popravilo = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high Guodpfxot Ag Uwj Af Rjg - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: rabljeno, največja dovoljena obremenitev: 37.885 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Oprema: ABS, Izvleček – oprema Nosilna površina * v izvlečni izvedbi z zadnjo nagibno površino, približno 1.000 mm x 8° Obloga iz trdega lesa * približno 48 mm debeline, nad osmi rebrasta pločevina JOST opore za sedelno prikolico * (mehanske) z 2-stopenjskim menjalnikom za približno 24 t dvižne obremenitve (približno 50 t testne obremenitve) Gedpfxjzv A Aqe Af Reug BPW osi in vzmetenje * 2 trdni osi * 1 os s krmiljenim zglobom * Tehnična osna obremenitev: 12.000 kg na os Zračno vzmetenje * z ventilom za dvig in spuščanje Zavorna naprava * v skladu z direktivami EU, z EBS-E (2S2M) Dodatna oprema * 2-palčni kraljevi zatič * Ena pocinkana jeklena čelna stena, približno 400 mm visoka * Merilnik obremenitve za ugotavljanje osne obremenitve, vključno z diagramom obremenitve * Na podaljšku (gooseneck) aluminijaste stranske stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V) * Ena orodjarna omara, pocinkana, integrirana v nagibni podaljšek (± 47 kg) * 3 pari WADER žepov za kontejnerje na nosilni površini za 20' (30') ali 40' kontejner. (± 30 kg) * 6 parov žepov za podpore za vstavljive podpore, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. (± 18 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 230 kg) * Dvignjena os na sprednji osi * Premikalne vstavne letve za aluminijaste priklopne rampe na zadnji strani vozila * 2 LED luči za vzvratno vožnjo, nameščeni na zadnji plošči * 2 para Ferry obročev pod podaljškom in 2 para zadaj (± 16 kg) * Štiri opozorilne table, ki se lahko izvlečejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo. (± 25 kg) * Na opozorilnih tablah nosilec za rotacijsko luč * Rotacijska luč, priložena ločeno * HRM-metalizacija (metalizacija z visoko odpornostjo) Lakiranje * Končni sloj lakiranja, enobarvna barva RAL 3002, karminsko rdeča.

Stanje: rabljeno, številka stroja/vozila: YG9411007C303xxxx, Leto izdelave: 2012, Prosimo, navedite referenčno številko na zahtevo: 24099 Specifikacije: Letnik: 2012 EU odobritev velja do 22.10.2026 Pnevmatike (glejte slike) Dolžina: 1365 cm Neto teža: 10.460 kg Dovoljena skupna masa: 45.000 kg Maksimalna nosilnost: 34.540 kg HIAB XS 144 Hiduo žerjav Daljinski upravljalnik Certificiran žerjav do 11/2026 Daljinski upravljalnik Stolpi in okvir Vozilo je v dobrem stanju Pripravljeno za dostavo Opis: Tyllis – vlečna enota, letnik 2012, opremljena z žerjavom HIAB XS 144. Nove zimske pnevmatike je mogoče naročiti ob dodatnem plačilu. Lastnik predvideva, da je žerjav certificiran do 11/2026. Pripravljeno za dostavo. Guodpfx Aezurq Uef Rsg   Tehnični pregled: Da EU odobritev velja do: 22.10.2026 Lastna teža: 10460 Skupna teža: 45000 Nosilnost: 34540 Dolžina: 1365 Model: vlečna enota z žerjavom HIAB XS 144 = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Gujdpfx Ajya E A Njf Rjg Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Celoten seznam naših vozil, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Labodji vrat" (swan neck) z zadnjim naklonom cca 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN) Trdna lesena obloga, debeline cca 30 mm. Tovorilna površina. Tovorilna površina se po "labodjem vratu" hidravlično dviga in spušča, dolžina cca 2.800 mm, z zadnjim naklonom cca 1.000 mm x 8°. 6 parov pritrdilnih obročev, z možnostjo zlaganja navzven (LC 5.000 daN). 2 para pritrdilnih obročev, z možnostjo zlaganja navzven (LC 10.000 daN). 1 par pritrdilnih obročev, z možnostjo zlaganja navznoter, na centralnem nosilcu spredaj (LC 10.000 daN). Rešetkasta obloga C40/4 (točkovna obremenitev cca 2,3 t na površini cca 20 x 20 cm) nad osmi. Obloga iz valjanega jekla. Dvodelne jeklene rampe. Ena para pocinkanih, dvodelnih jeklenih ramp, okrepljene izvedbe, cca 3.185 + 1.420 x 1.250 mm, z rešetkasto oblogo C40/5 (točkovna obremenitev cca 8 t na površini cca 20 x 20 cm). Rampa z hidravlično dvigljivimi in zlaganimi deli rampe ter hidravličnim dvižnim mehanizmom, maksimalna obremenitev na par: 40.000 kg. V skladu z uredbo 1230/2012/EU se rampe z dolžino, krajšo od 300 mm, v vožnji ne upoštevajo pri izračunu dolžine vozila (16.500 mm). Podporne noge sedelne spojke. JOST podpore sedelne spojke (mehanske) z 2-stopenjsko prestavo za cca 24 t dvižne nosilnosti (cca 50 t preizkusne nosilnosti). Pnevmatike 235/75 R 17.5 3PMSF. TPMS sistem za nadzor tlaka v pnevmatikah, skladno s standardom ECE R 141. Osi. BPW osi in vzmetenje. 2 fiksni osi, 1 os z vodilnim členom. Tehnična nosilnost osi: 12.000 kg na os. Elektro-magnetična blokada za vožnjo nazaj, aktivira se preko prestave za vožnjo nazaj in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Zavorna sistema. WABCO zavorna sistema v skladu z evropskimi predpisi z EBS-E (2S2M). Barve. Prikolica RAL 3002 karminsko rdeča. Platišča srebrna. Ponjava v RAL 9006 srebrna. Vključeno. 1 nosilec rezervnega kolesa pod tovorilno površino na desni strani, v smeri vožnje. 2 palčni kraljevski zatič. Ena pocinkana jeklena čelna stena. Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke. 4 kosi klinih z nosilcem na čelni steni. 3 višine lesenih plošč. Pocinkane, zložljive podpore pod naklonom tovorilne površine. Višinsko nastavljiva nadgradnja s ponjavo *3.960 mm*. Pocinkana čelna stena z mehanizmom za napenjanje za drsno zaveso. Strop blagovne znamke EDSCHA, višinsko nastavljiv za cca 400 mm, premakljiv naprej na aluminijastem profilu strehe (privit na sprednjo in zadnjo steno). Gusdpfx Aozu Ebtjf Rsg Na tovorilni površini 3 pari drsnih letven. Nadgradnja se lahko na zadnji strani na levi in desni strani hidravlično razširi za cca 750 mm. Drsna ponjava z cca 700 mm rezerve v dolžino, z napenjalnimi trakovi v razmaku cca 600 mm. Zgornji rob nadgradnje cca 3.960 mm (obremenjeno). Vožnja z odprto drsno ponjavo ni dovoljena in povzroči poškodbe ponjave. Na valjanem jeklu na "labodjem vratu" in na tovorilni površini, vgrajena plast peska kot zaščita proti zdrsu. Pokrivne plošče za premostitev prostora med rampami in tovorilno površino. Elektro-hidravlična agregat zadaj pod tovorilno površino. Na "labodjem vratu" in na rampah, na levi in desni strani, vsak nosilec za opozorilne table, vključno z vtičnico. Upravljalni ventili za rampe, nameščeni na desni strani prikolice. Rešetkasta obloga na naklonu "labodjega vrata" C30/3 (točkovna obremenitev cca 2 t na površini 20 x 20

Stanje: rabljeno, največja dovoljena obremenitev: 48.300 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček iz opreme. Celotna oprema na zahtevo. Gansji vrat (swan neck) z nagnjenimi robovi spredaj, približno 45° in z zadnjim nagnjenjem, približno 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Trdna lesena obloga, debeline približno 30 mm. Nosilna ploščad v dvojno izvlečni izvedbi z zadnjim nagnjenjem, približno 500 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 4 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno spredaj na nosilni ploščadi (LC 10.000 daN). 1 vmesna miza, približno 250 mm. Izrezi v zunanjem okvirju nosilne ploščadi za pritrditev zateznih trakov (LC 2.000 daN). Trdna lesena obloga, debeline približno 48 mm, nad osmi rebrasta jeklena obloga. Osi BPW osi in vzmetenje, vse osi hidro-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F). Gjdozqiitjpfx Af Reug Podpora sedelne ročice JOST podpore sedelne ročice (mehanske) z dvostopenjsko prestavo za približno 24 t dvižne sile (približno 50 t testna obremenitev). Zavorna naprava v skladu z evropskimi predpisi z EBS-E (4S3M), brez povezovalnih cevi do vlečnega vozila. Barvanje Vrhnja kakovostna in dolgotrajna zaščita proti koroziji standardno peskanega varjenega okvirja, zagotovljena z dvokomponentno (2K) cinkovo temeljno barvo. Kakovostno dvokomponentno (2K) zaključno barvanje, enobarvno, v barvi RAL 3002, karminsko rdeča. Zadnji del je metaliziran in barvan v barvi RAL 9010 (čista bela). Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava v skladu z evropskimi predpisi. Razsvetljava 24 voltov, ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polnim priključkom v skladu z ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključno z naslednjo dodatno opremo: 2-palčni kraljevi zatič (Königszapfen). Pocinkana jeklena čelna stena, približno 400 mm visoka. Rumeno-rdeče zračne spojke na pocinkani priključni letvi spredaj. 4 kosi zavorne čevlje z nosilcem na čelni steni. Nosilec za rezervno kolo pred čelno steno. Elektro-hidravlična agregatna enota. Pomožno krmiljenje spredaj in zadaj s kabelskega daljinskega upravljalnika, upravljanje s pritiskom na gumbe, z nadzorom ene osi (brez vgradnje v vlečno vozilo). Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 14. Manometer za obremenitev za ugotavljanje obremenitve osi, vključno z diagramom obremenitve. Na gansjem vratu aluminijaste bočne stene in zadnja stena, vstavljive, približno 2.440 x 400 mm (D x V). Zadnji pocinkani vložni okvirji so odstranljivi (dolžina nadgradnje približno 2.560 mm). Orodjarna škatla, galvanizirana, integrirana v nagnjeni gansji vrat. 4 pari žepov za kontejnerje WADER na nosilni ploščadi za 20', 2x 20', 40' ali 45' kontejner. 7 parov žepov za okvirje za vložne okvirje, približno 100 x 50 mm, v zunanjem okvirju nosilne ploščadi. Podaljški, pocinkani, izvlečni za približno 230 mm na stran. Drseče vložne letve za aluminijaste rampe na zadnji strani vozila. 2 para Ferry obročev pod gansjim vratom in 2 para zadaj.

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings Gsdotphtmopfx Af Roug 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm Guodpounrapefx Af Reg - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, številka stroja/vozila: WSM0000000516xxxx, Leto izdelave: 2016, Prosimo, navedite referenčno številko ob povpraševanju: 22991 Specifikacije: Model 2016 Zračno vzmetenje Pnevmatike (glej slike) Kombinirana hladilna/zamrzovalna enota Carrier Dolžina: 1404 cm Širina: 260 cm Medosna razdalja: 131/131 cm Lastna masa: 10.510 kg Guedpfxszqlc Ne Af Rog Največja nosilnost: 31.490 kg Opis: Zaprt polpriklopnik Schmitz Cargobull iz leta 2016. Naprava je bila nedavno servisirana. Pripravljeno za uporabo. Tuf: Da EU odobreno do: 18.02.2027 Lastna masa: 10510 Nosilnost: 31490 Model: Cargobull Skapsemi z Carrier agregatom. Odobreno do 02.2027 = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, Visit our website, where you can find our entire vehicle inventory with many more photos and information in several languages. SEL 8054 System Trailer PRSSL-24-1-TRI Tail lift / Steering axle German registration / 1st owner First registration: 06.10.2015 Gross vehicle weight rating (kg): 40,000 Permissible total weight (kg): 40,000 Unladen weight (kg): 9,330 VIN: WSJPRS327FTCA5056 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 BPW axles 3rd TRIDEC steering axle Air suspension Disc brakes BODY STRUCTURE Internal dimensions: Height (m): 2.27 (2.10) Width (m): 2.47 Length (m): 13.65 TAIL LIFT: Dautel Type: DL250010 Year of construction: 2015 Qmax (kg): 2,500 VEHICLE DOCUMENTS: Registration certificate (Fahrzeugschein) Registration title (Fahrzeugbrief) M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC j. Gjdpfexpb E Rox Af Rjug (German, Bosnian) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN All efforts have been made to ensure the accuracy of these details; however, we cannot accept liability for errors or omissions. We kindly ask customers to consult the available photos. The stated dimensions are approximate values. Our vehicles are sold as seen, in their current condition. We invite customers to visit our company in order to inspect the vehicle personally. Test drives are also possible. Please be aware that the vehicle is sold with the batteries currently installed. Should you require new batteries, please contact us for pricing information.

Stanje: rabljeno, Leto izdelave: 2007, Na zahtevo navedite referenčno številko: 23573 Tehnične specifikacije: Letnik modela: 2007 Zračna vzmetitev Pnevmatike (glejte slike) Dolžina: 1360 cm Širina: 255 cm Medosna razdalja: 131/181 cm Lastna teža: 7.830 kg Največja dovoljena nosilnost: 37.170 kg Brez kontejnerja Zavore, zračne posode in amortizerji so opravili najnovejši pregled v skladu s standardi EU. Orodjarna Pripravljeno za dostavo. KM: 90 Tehnični pregled: Ne Odobreno po standardih EU do: 30.04.2018 Lastna teža: 4100 Nosilnost: 37170 Guedpszqna Defx Af Reg Širina: 255 Dolžina: 1360 Model: Rettsemi = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: rabljeno, številka stroja/vozila: XL931N5BL6L00xxxx, Leto izdelave: 2006, Prosimo, navedite referenčno številko ob povpraševanju: 23695 Specifikacije: Leto izdelave: 2006 Zračno vzmetenje Pnevmatike (glej slike) Izvlek: cca 2 metra Dolžina: 1.355 cm Širina: 255 cm Medosna razdalja: 133/181 cm Lastna teža: 13.650 kg Nosilnost: 39.750 kg Hidravlične dvižne rampe Gjdpfx Aszqmikof Roug Opis: Broshuis strojni polpriklopnik iz leta 2006. Ni znanih napak; po podatkih lastnika je potrebno podmazati izvlek. Možna hitra dostava. TÜV: ne Homologiran v EU do: 08.05.2026 Lastna teža: 13.650 kg Nosilnost: 39.750 kg Širina: 255 cm Dolžina: 1.355 cm Model: Maskinsemi s hidravličnimi nakladalnimi rampami = Dodatne informacije = Za več informacij se obrnite na ATS Norway.

Stanje: rabljeno, prva registracija: 10/2001, Leto izdelave: 2001, Nooteboom 4-osno kontejnersko podvozje, deljivo na 2 dela - 1. element: 1 os - 11.000 kg skupne dovoljene mase - 2. element: 3 osi - 26.000 kg skupne dovoljene mase - ABS - Zračno vzmetenje - 4 x BPW Eco Plus osi - 1. os dvižna - Dvižno/spuščalna naprava - Spredaj in zadaj po 2 podporni nogi - Pnevmatike: 385/55 R 22.5 Guodpfjwmpa Hex Af Reg - Nemška polprikolica - TÜV / tehnični pregled / SP: po želji in za doplačilo: novo! Pridržujemo si pravico do napak in predčasne prodaje!