Müller Mitteltal T 3 3 Achs Tieflader- Anhänger nakup rabljenega (65.748)

Stanje: novo, največja dovoljena obremenitev: 31.900 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, T 4 Profi 40.0 ----Brake System: Fsdpfx Aljylfvge Hspg * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and stepless height adjustment ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck display via EBS signal – no truck-side installation required * SmartBoard infotool with pressure sensors for axle load display by axle group * 15-pin power connector * LED taillights * Removable rear LED rotating beacon ----General Attachments: * Warning sign package front & rear * 2 x toolboxes made of galvanized (powder-coated) sheet steel, approx. 650 x 300 x 600 mm, mounted right-hand side * Closed single plastic fender at the front * Straight rear steel mudguards with spray protection (anti-spray mist) * Side underrun protection ----Low Loader Deck: * Turntable platform extension by 520 mm with 45° corners and 3 recessed storage compartments including lockable lids * Floor over turntable platform made of 50 mm and on the low loader platform of 60 mm softwood * 20 mm rubber flooring in the running area instead of wooden floor, with a recessed bed length of 6,780 mm including the ramp slope * Rubber flooring on ramp slope left and right, approx. 860 mm long * Four stake pockets per side (stakes not included), each with 2 t lashing capability ----Chassis: * Chassis made of high-strength fine-grained steel ----Load Securing (Lashing Package): Turntable Platform: * 2 pairs of 13.4 t lashing rings on the outer frame of the turntable platform Recessed Bed: * Four pairs of 10 t folding and multi-directional lashing rings per side on the outer frame * Two pairs of 13.4 t swivel lashing rings each at the rear left and right ----Ramps: * Rubber covering on foldable ramps * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs of galvanized folding outriggers for 3 m total width (not at the rear slope) * Widening planks stored in a side compartment on the left ----Dipper Stick Rest: * Dipper stick rest over rear axle to end of ramp slope, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4 t lashing rings on the sides of the dipper stick rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output from the truck over 40 – max. 120 l/min) ----Loading Dimensions: * Rear cargo area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp slope) * Area above turntable: approx. 2,990 x 2,520 mm ----Loading Height: * Loaded approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour tape on sides and rear * Chassis, turntable, ramps, and outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images may include special equipment ----Delivery Time: * Vehicle available from approx. week 23/2026

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lowering system, including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support legs at the front and mechanical swivel supports at the rear of the chassis * Straight pressed steel fenders * Spare wheel holder under the chassis, right side ----Low Loader Deck: * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the fifth wheel platform, foldable and removable * Rear board plug-in, 150 mm high * Rear slope on fifth wheel platform to low-bed approx. 700 mm long * Fifth wheel platform with 50 mm timber planks, low-bed deck with 60 mm timber planks * Tread plate above the axles ----Widenings: * 8 x mechanical folding extensions to a total width of 3 meters (not on rear slope; extension planks available with storage on the platform) * Mechanically adjustable warning panel sets front and rear ----Load Securing (Lashing Package): * On the fifth wheel platform: 2 x 6.3 t lashing rings on each side, plus 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side, plus 4 x 10 t lashing rings, pivotable and lowerable, recessed in the outer frame * 2 x 6.4 t lashing eyes per side, plus 1 lashing ring at the excavator arm rest * 2 x container locks directly after the neck in the low-bed platform ----Excavator Arm Rest: * Continuous excavator arm rest from end of last fixed axle over steering axle to end crossbeam, with internal reinforcements, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting Fpedpfx Ajy Ngzysl Heg * Outer board on ramp made from 50 mm hardwood * Climbing strips on outer frame of ramp and on approach slope * Rubber matting on ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in the truck between 40 l/min and 120 l/min) ----Loading Dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach slope) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Coating: * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted in a black shade * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images may show equipment not included with the offered vehicle ----Delivery time: * available from c

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle trailing steered with electro-pneumatic steering lock ----Suspension: * Air suspension with lift-and-lower function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis * Straight sheet steel mudguards * Spare wheel holder under the chassis on the right side ----Low Loader Deck: * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable * Rear wall – 150 mm – fitted * Rear slope at the gooseneck platform to the low-bed approx. 700 mm long * Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks * Tread plate over the axles ----Extensions: * 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame * On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame * 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess * 2 x container locks directly after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofit of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp as well as on the drive-up slope * Rubber on the ramp and drive-up slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min) ----Loading Dimensions: * Loading area, gooseneck platform: approx. 3,935 x 2,480 mm Fsdpfx Ajy Ngz Hol Hjpg * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope) ----Fifth Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: * Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, landing gears, air reservoirs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Sample images may include features not part of the offered vehicle * Sample images ----Delivery time: * tba

Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle with steering function and electro-pneumatic steering lock ----Suspension: * Air suspension with lifting/lowering system and RtR valve ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * Smartboard operator panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon at rear left ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swing supports at rear of chassis * Straight steel mudguards * Spare wheel carrier mounted under chassis, right side ----Low-loader platform: * Gooseneck platform with 45° chamfered front corners and tool box at the front made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high aluminum side boards (RAL 9010 pure white) foldable and removable, along the sides of the gooseneck platform * Rear panel 150 mm high, plug-in * Rear slope on the gooseneck platform leading to low-bed, approx. 700 mm long * Gooseneck platform with 50 mm wooden planks; low-bed platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m (not on the rear slope, extension planks available with storage on gooseneck platform) * Mechanically adjustable warning panel sets, front and rear ----Load securing (Lashing package): * On the gooseneck platform: 2 x 6.3 t lashing rings per side and 3 x 5 t lashing bars per side on the outer frame * On the low-bed platform: 2 x 13.4 t lashing rings per side and 4 x 10 t lashing rings, swivel and lowerable, embedded in the outer frame * 2 x 6.4 t lashing eyes per side and 1 lashing ring at the rear, in the excavator-arm recess * 2 x container locks immediately after the step in the low-bed platform ----Excavator-arm recess: * Continuous from the end of the last rigid axle over the steering axle to the end cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * Quadruple control block for future retrofitting of hydraulically lateral shifting ramps by customer * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output of 40 up to 120 liters/min in the truck) ----Loading dimensions: Fsdpfspk D I Ajx Al Hepg * Gooseneck platform loading area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, access ramps, rear folding supports, and extension brackets are hot-dip galvanized * Axles, landing legs, and air reservoirs are painted in a shade of black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images may show equipment not included in the offered vehicle ----Delivery time: * Available from week 38/2026

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: Fodpfjykx Nkox Al Hjpg * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: Fedpfxeykx Nqj Al Hjpg * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary) * LED lighting system 12/24 V * Removable rear LED beacon ----General Accessories: * Mechanical warning plate kit for 3 m total width Fodpol Tihuefx Al Hepg * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left * Front axle with plastic mudguards, rear with galvanized steel mudguard skirts ----Low Loader Platform: * Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers * Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform * Bamboo wood between the longitudinal beams in front of the excavator arm rest ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at front corners * 2 x 13.4 t UVV lashing points each at side front and rear corners * 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions) * 4 stake pockets per side with additional 2 t lashing capability each * 1 x 16 t UVV lashing ring on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side) ----Excavator Arm Rest: * Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm via air suspension ----Platform Dimensions: * Platform over turntable: 2,600 + 390 x 2,520 mm * Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines ----Paintwork: * Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized * Tow bar, axles, hydraulic axle supports, and air tanks painted in black ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately*

Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0: ----Braking System: * Wabco EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (when lifted, ride height +30 mm) * Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads. * Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment ----Electrics / Lighting: * Smartboard as an info tool with pressure sensors for axle load indication per axle group * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) * LED lighting system 12/24 V * LED rotating beacon (removable), rear ----General Fittings: * Mechanical warning sign set for 3 m total width * Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle and galvanized steel mudguards rear axle ----Low Loader Platform: * Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear) * Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front * Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform * Bamboo wood between the longitudinal beams, in front of the excavator stick rest area ----Load Securing (LaSi Package): * 2 x 6.4 t lashing eyes in the front corners * 2 x 13.4 t UVV lashing points on each side in the front and rear corners * 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions) * 4 stake pockets per side with simultaneous 2 t lashing option * 1 x 16 t UVV lashing ring on the rear crossmember ----Width Extension: * Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest ----Ramps: * Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm adjustable via air suspension ----Loading Area Dimensions: * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp ----Paintwork: * Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized * Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors Fpjdpfx Aloxptn Dj Hog ----Delivery Time: Available immediately*

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica Fpsdpfx Alewmpbdo Hsg - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) ----General equipment: Fsdpfx Alsq Euako Hopg * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders Fpodpfxstpta Ds Al Hog * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lower system and RtR-valve * Smart Board installed on trailer as information tool (axle load display - separate for front and rear) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side underrun protection * Swivel supports at rear of chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Contour tape on sides and rear, reflective * 15-pin power plug * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Toolbox made of galvanized steel approx. 650 x 300 x 600 mm, black powder coated, side right * Compartment in rotary frame for accessories with folding lid, 2 pcs. container locks permanently installed (directly after turntable platform) * ROBOT welded anti-slip coating on the steel plate of the rotary frame platform (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) at front left & right on front wall bearer, front & rear 1 pair of UVV lashing rings (13.4 t), and on each side 3 pairs of UVV lashing rings (10 t) pivotable and lowerable, loadable in all directions and embedded in the outer frame, each side with 3 stake pockets with simultaneous 2 t lashing option * 6 pairs mechanical folding outriggers for 3 m total width (not in the rear taper) * Extension boards stored in the middle of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable Fpsdstplwiopfx Al Heg * 4-way control block for later retrofitting of hydraulic ramp shift * Excavator arm storage over rear axle, continuous to end crossmember (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6400 daN in excavator arm storage at side in longitudinal frame * 2 steps galvanized at rotary frame left + right * Profifix lashing strip centered in longitudinal axis, in flat area for lashing up to LC 3000 daN * Chassis, turntable, folding outriggers, drop supports, and drive-on ramps hot-dip galvanized * Axles, slewing ring, air tank, tow bar painted in black tone * Loading edge loaded approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer warranty * Errors and intermediate sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * PT 30 Profile: * EBS (electronic braking system) Fpodpfxjxptn Rs Al Heg * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lifting and lowering function, including raising/lowering (RtR) valve * Smart-board infotool mounted on trailer (for separate axle load display front/rear) * Tire pressure monitoring with display option in the truck via EBS signal—no installation required on the truck side * Side underrun protection * Rear swing-down support legs on chassis frame * Mechanically adjustable warning sign packages front and rear * Front plastic quarter mudguards with splash guards * Rear straight galvanized steel skirts with splash guards * Reflective contour tape on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar, 1,200 mm long with 40 mm towing eye, height adjustable via drawbar spring & turnbuckle * Tool box made of galvanized sheet steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Box in turntable for accessories with folding lid, 2 container locks permanently installed (directly behind the turntable platform) * Robot-welded anti-slip coating on the steel plate of the turntable platform (projecting weld beads) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on bulkhead support, 1 pair each of UVV lashing rings (13.4 t) at front & rear, and 3 pairs UVV lashing rings (10 t) on each side, swiveling and lowerable, loadable in all directions and recessed into the outer frame, 3 stake pockets per side with simultaneous 2 t lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in the rear slope) * Widening boards stored in the center of the loading area * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically side-adjustable * 4-way control block for future retrofitting of hydraulic ramp shift * Excavator arm storage above rear axle, continuous up to end cross member (total length approx. 2,100 mm) * 2 pairs of lashing rings LC 6,400 daN in the excavator arm storage, mounted on the side in the longitudinal frame * 2 galvanized steps on turntable left & right * Profifix lashing rail along the longitudinal axis in the center, on flat area, lashing capacity up to LC 3,000 daN * Chassis, turntable, folding outriggers, drop legs and drive-on ramps hot-dip galvanized * Axles, turntable ring, air reservoirs, towing fork painted black * Loading edge height approx. 910 mm +/- 20 mm (depending on air suspension) * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. from week 22/2026 * Sample images

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing aggregate * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing ring * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted on the front right side of the chassis * 15-pin electrical connector * Multi-chamber tail lights * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located in the central locking storage areas, plus 2 on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipper body with continuous side walls, upper section reinforced with internal tube, without central stakes, fold-down sides with drop-side spring assist * Rear stakes bolted Fpodpfx Asl Th Htol Hsg * Combination steel double-wing rear doors, asymmetrically split, can be swung and locked at 270°, not foldable, with additional pivot frame for automatic rear door opening during tipping, locking by galvanized rotary bar lock at the rear and central locking, deactivation function for the automatic rear door when reversing with open swing doors * Each corner with 1 x 5 t lashing point, plus 4 x 3 t recessed lashing rings per side in the outer frame * 4 mm fine-grain steel floor plate * Rear guide rails for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminium ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment for ramps recessed under the loading area at the rear * Chassis, drawbar, underrun protection, rear stake, rear folding supports hot-dip galvanized * Axles, suspension, air tank, and landing gear painted in black * Tires: 285/70 19.5 * Sideboard paint finish in RAL 9010 pure white * Additional color options for side walls in RAL colors available at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release system for spring-loaded cylinders Fedpfxjl Th Duo Al Hjpg * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar adjustable in height by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm front right side on the chassis * 15-pin power socket * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks installed at each locking point of the central locking system, plus 2 hooks on the front wall * Chassis made of fine-grained steel * Steel pallet three-way tipper body with continuous side walls, internal tube reinforcement, no center posts, foldable with drop-side spring assist * Rear posts bolted * Combination steel wing-door tailgate, asymmetrically split with 2 leaves, can be swung and locked to 270°, not foldable; with additional pendulum frame for automatic tailgate opening during tipping, rear locking with galvanized rotary bolt and central locking system, deactivation function for automatic tailgate function when tipping backwards with open wing door * Each corner fitted with 1 x 5 t lashing ring, and each side with 4 x 3 t lashing points recessed in the outer frame * 4 mm fine grain steel floor plate * Rear mounting rail for loading ramps * Reinforced structure with cargo securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Lockable compartment from the rear, recessed under the loading area in the chassis for storing the ramps * Chassis, drawbar, underrun protection, rear post, and rear folding supports galvanized * Axles, springs, air tank, and landing gear painted black * Tires 285/70 R 19.5 * Drop-sides painted RAL 9010 pure white * Sidewall painting available in an RAL color of your choice for an additional charge * Vehicle has day registration (unused) * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: rabljeno, lastna masa: 8.680 kg, največja dovoljena obremenitev: 31.320 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2018, vzmetenje: drugo, velikost pnevmatike: 235/75R17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5, velikost zadnje pnevmatike: 235/75R17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Privezne ušesca, ABS, razširitev z opozorilnimi tablami, vozilo se prodaja po naročilu., -- Pridržujemo si pravico do tiskarskih napak, sprememb in napačnih podatkov, vzorčne slike --, Več podatkov na: !, More Details: ! Fpjdpfxsy Igu Do Al Heg

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Total loading area length approx.: 8,800 mm, low-bed approx.: 6,600 mm long, loaded loading height approx. 890 mm, 24 lashing rings each rated for 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing strips on the outside of the ramps and rear slope, side-adjustable loading ramps, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking as per legal requirements, rotating beacon, chassis fully hot-dip galvanized, incl. axle load indicators, surcharge for: warning signs with lighting and rotating beacon, widening to 3 m incl. wood inserts, price: €500, excavator boom recess, price: €1,000 net. -- Subject to misprints, errors, and changes, sample images only -- More data under: !, More details: ! Fsdpoy Rr I Uofx Al Hopg

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.200 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl.: 8.200 mm, Nizkopodno pribl.: 6.000 mm dolgo, Nakladalna višina obremenjena pribl.: 890 mm, 22 x privezne ušesce po 10 t, 10 x žepe za stranice v zunanjem okviru, nakladalne rampe (pribl. 3.100 x 750 mm), plezalna letva na zunanji strani na rampi in zadnjem naklonu, nakladalne rampe nastavljive vstran, lesen pod 68 mm debel, skladiščna škatla s pokrovom za privezne verige ali napenjalne trakove, kontura označena po predpisih, opozorilna luč, vozilo vroče cinkano v potopni kopeli, vključno z indikatorji obremenitve osi, doplačila za: Opozorilne table z osvetlitvijo in opozorilno lučjo, razširitev na 3 m z lesenimi elementi, cena: 500 €, izrez za roko bagra, cena: 1.000 € neto. Napake pri tisku, spremembe in pomote so pridržane, vzorčne slike. Več podatkov na: !, Dodatne informacije: ! Fpsdpey Niv Hjfx Al Hsg

Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Overall loading area length approx.: 8,800 mm, Lowbed approx.: 6,600 mm long, Loaded deck height approx.: 890 mm, 24 x lashing rings, each 10 t, 12 x stake pockets on the outer frame, Loading ramps (approx. 3,100 x 750 mm), Climbing strip on the outside at the ramps and rear slope, Loading ramps laterally adjustable, Wooden floor, 68 mm thick, Storage box with lid for lashing chains or tension belts, Conspicuity markings according to regulations, Rotating beacon, Vehicle hot-dip galvanized, incl. axle load indicators, Surcharges for: Warning plates with lighting and rotating beacon, Extension to 3 m with wooden inserts, Price: 500 € , Excavator arm recess, Price: 1,000 € net, -- Mistakes, errors, and changes excepted, sample pictures --, More data at: !, More details: ! Fpedpjy H A R Sjfx Al Hjg

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi * Nemška prikolica * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS Fedpfx Asyuri Ejl Hepg * BPW osi * 40 t * lastna teža: 9300 kg * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: rabljeno, največja dovoljena obremenitev: 4.960 kg, skupna masa: 10.500 kg, prva registracija: 04/1993, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 6.260 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.430 mm, prostornina tovornega prostora: 37 m³, Oprema: ABS, dvižna zadnja plošča, 2-axle tandem refrigerated trailer, 7 m, with 1 ton tail lift. Fpodpfsykxflox Al Heg * THERMOKING LND-II MAX (diesel engine) and stand-by cooling, 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock braking system (ABS) No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors are expressly reserved. The description serves solely for the identification of the vehicle and does not constitute a warranty in the legal sense of the purchase contract. The purchase contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a leasing, financing, or hire-purchase offer Guarantee insurance available upon request from the insurer * TÜV inspection / UVV LBW (tail lift safety test) / tachograph inspection and OBU (On-board Unit) installation can be arranged by our local partners * Export license plates for 30 days available All export documents can be provided, but must be requested individually * Toll collection for Toll Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lower function * Mounting points in front of bulkhead and rear slope for retrofitting container locks (for 20" containers) * Drawbar with 50 mm flange towing eye, height-adjustable * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED lighting * 21 t GVW version with reinforced frame and axles * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped design * Mounting provision for container locks in front of bulkhead * Bolted smooth sheet front wall * Split steel side walls, trapezoidal profile, foldable with center folding stake * Steel rear panel, insertable between the ramps (bracket for storage inside the front wall when not in use) * Rear stanchions, bolted * Perforated outer frame, bent approx. 45 degrees, 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing rings every 600 mm * Profifix lashing rail, longitudinal axis center, lashing capability up to LC 3000 daN * In each front and rear corner: 1 x 10 t lashing ring * Lashing package: each side 2 x 8 t retractable lashing rings in outer frame, various holes for 1.2 t lashing in front and rear cross members * One-piece mechanical grating drive-on ramps with spring system for single-person operation, approx. 3,000 x 620 mm (retractable to 20 mm) * Rear chassis approach angle approx. 860 mm * Drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs and landing gear painted black * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Side wall painting in RAL color of choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion * New vehicle with manufacturer’s warranty * Subject to errors and prior sale Fpsdpoq Dyu Uefx Al Hog * Available from CW 29 / 2026

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle is a trailing steering axle with electro-pneumatic steering lock, activated by PIN in reverse gear * Additional lock for the trailing axle operated from the tractor unit for shunting purposes – no installation necessary on the truck side – assigned to PIN 10; the lock must be deactivated before driving on public roads ----Suspension: * Air suspension with raise and lower function and Ride-on-Road (RtR) feature ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck's display via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights activated via reverse gear * SmartBoard installed as an info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for extended-length lighting * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanised sheet steel mudguards * Swivel arm as carrier for connecting lines in front of the front panel ----Warning Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm floor covering made from larch / Douglas fir instead of spruce / fir * Rear bevel – 700 mm long – on the semi-trailer platform to the low-bed section with checker plate covering, and at the end a perforated strip for attaching aluminum approach ramps * Tread plate covers over the wheels * SP combo package: toolbox with 45° corners made from galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, located on the semi-trailer platform approx. 2,480 x 500 mm * Folding lid on top as well as side doors in the angled corners * Foldable aluminum side boards 500 mm high on the semi-trailer platform, including foldable and removable rear stanchions * Inserted aluminum rear wall, 150 mm high * Second kingpin position * Preparation for container locking * Preparation for 3 recesses in the approach bevel from the low-bed to the gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load Securing: Semi-trailer platform: * In the front corners and front, 50 mm drilled holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the sides towards the approach slope * Perforated outer frame, 45° folded with hole pattern for lashing points (2 t lashing points every 480 mm) * On each side, 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings centrally positioned directly in front of the approach ramp to the gooseneck and recessed * On each side, 3 pairs of 13.5 t lashing rings and 5 pairs of 10 t lashing rings recessed in the outer frame * On each side, 4 stake pockets recessed in the outer frame * Profifix lashing rail in the center along the longitudinal axis (lashing capacity 3 t per lashing circuit) Fsdpfx Aleykx I Hs Hspg ----Excavator Arm Rest: * From the end of the last rigid axle to the rear crossmember, W = 770 mm, D = 270 mm (on each side, 2 x 6.4 t lashing rings solid welded in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (load capacity 26 t/pair) * Hydraulic ramp

Stanje: novo, največja dovoljena obremenitev: 29.850 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as trailing steering axle with electro-pneumatic steering lock via reverse gear PIN * Additional trailing axle lock, operable from the cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10; lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lowering function as well as RtR function ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck instrument cluster via EBS signal – no truck-side installation required * LED rear lights 12 / 24 V * Flashing side marker lights * LED reverse lights, activated via reverse gear * SmartBoard mounted as an infotool with pressure sensors exclusively for total axle load indication * 7-pin socket at the rear for overlength lighting * Removable LED beacon at the rear ----General Attachments: * Aluminum air tanks * Mechanical crank landing gears * Galvanized steel mudguards * Swivel arm as a carrier for connection cables in front of the front bulkhead ----Warning System Package: * Mechanically adjustable warning sign package ----Low Loader Platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear inclined section – 700 mm long – on the saddle platform to the low-bed with checker plate surface and at the end a perforated strip for hanging aluminum loading ramps * Tread plate covers above the wheels * SP-Combo Package: Tool box with 45° corners, made of galvanized steel and additionally powder-coated in RAL 9006 white aluminum, on the saddle platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the slanted corners * Fold-down aluminum side walls, 500 mm high, on the saddle platform, including rear stakes, foldable and removable * Inserted aluminum rear wall, 150 mm high * 2nd kingpin position * Prepared for container locks * Prepared for 3 mounting shafts in the inclined section from the low-bed to the gooseneck * Prepared for retrofitting fold-out supports for 3 m extension by welding in receptacles on the outer frame ----Load Securing: Saddle Platform: * Front corners and forward 50 mm bores for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor towards the inclined ramp * Perforated outer frame, 45° angled with hole pattern for tie-downs (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Fedpsykx I Tsfx Al Hjpg Low Loader Platform: * 2 x 16.5 t lashing rings centered directly before the inclined section to the gooseneck, recessed * Each side with 3 pairs 13.5 t and 5 pairs 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed in the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end crossmember W = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings permanently welded into the excavator arm rest) ----Ramp: * Hydraulic one-piece “ALLTEC” aluminum ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per set) * Hydraulic ramp shifting on sliding tube for ramp shaft ----Hydraulics: * Hydraulic flow divider in the trailer (for lorry hydraulic pump output exceeding 40 l/min up to max. 250 l/min), climbing strips on t

Stanje: rabljeno, lastna masa: 4.190 kg, največja dovoljena obremenitev: 13.810 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/2016, vzmetenje: zrak, velikost pnevmatike: 385/55R22,5 160J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R22,5 160J, velikost zadnje pnevmatike: 385/55R22,5 160J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Sidrne zanke, aluminijaste stranske stranice 800 mm, doplačilo za rampe 800 €, -- Pridržujemo si pravico do tiskarskih napak, sprememb in razlik v podatkih, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Fsdpfx Alsy N Ryys Hspg