Müller Kmetijski Stroji nakup rabljenega (252)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
MÜLLER
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0:
* EBS brake system
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical rear axle equalization
* Side underrun protection
* Pivoting supports at the rear of the chassis frame
* Mechanically adjustable warning panel packages front and rear
* Front axle: closed plastic mudguards; rear axle: straight galvanized steel mud flaps, each with splash protection
* Reflective contour tape on the sides and rear
* Foldable (hot-dip galvanized) toolbox lid on the bogie platform
* Multi-voltage system
* LED tail lights
* Removable rotating beacon at the rear
* Towing drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle
* 15-pin electrical plug
* Four stake pockets on each side (no stakes present) with lashing possibilities
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-certified lashing rings, swivelable and lowerable, loadable in all directions and recessed into outer frame - 13.4 t in the corners, otherwise 10 t
* 6 pairs of mechanical folding outriggers for 3 m overall width (not present at rear taper)
* Widening planks stored in center of load area
* Excavator arm support over rear axle up to end beam approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on sides of excavator arm support)
* Mechanically single-piece loading ramps with spring system (approx. 3,000 x 720 mm)
* Mechanical lateral ramp adjustment
* Load area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen approx. 1,070 mm
* Rear load area: approx. 6,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm approach ramp)
* Chassis, bogie, towing drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted in black shade
* 235/75 R 17.5 twin tires
* Unladen weight 5,900 kg
* -- Technically possible gross weight of 30,000 kg --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
* Available from week 12/2026
* Sample image
Cgsdpex Ipa Nefx Abvop
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline"
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem compensating unit
----Drawbar / Flange Eye:
* Approx. 300 mm height-adjustable drawbar with 40 mm flange eye
----General Fittings:
* Jost mechanical landing gear at front
* Rear: 2 mechanical, hot-dip galvanized drop-down support legs
* Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS tire pressure monitoring system
----Tipping Platform:
* Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall
* Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance)
* Rear stanchions bolted
* Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system
* Deactivation function for automatic rear wall opening when tipping backwards with open door
* 4 mm steel floor plate
* Rear ramp carrier rail for drive-on ramps
----Load Securing:
* 1 x 5 t lashing point in each corner
* 4 x 3 t recessed lashing rings per side, fitted in the outer frame
----Ramps:
* 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks
* Lockable storage compartment for ramps under the loading platform, integrated into the chassis
----Paint Finish:
* Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized
* Sidewalls and tailgate painted RAL 9010 pure white
* Sidewall painting in any RAL color available at extra charge
* Axles, springs, flange eye, air tank, and landing gear painted in a black tone
Cgodpfx Aol Thyxsbvep
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery Time:
* Immediately available ex-works Egestorf on A7
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline"
----Brakes:
* EBS braking system
* Emergency release device for spring brake cylinders
Cedpfxsl Thyms Abvogp
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with tandem load equalization unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye
----General Attachments:
* Jost mechanical landing gear at the front
* 2 mechanical hot-dip galvanized folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side
* Bolted underrun protection
* Plastic quarter mudguards
----Electrics / Lighting:
* 15-pin power connector
* LED lighting
* TPMS tire pressure monitoring system
----Tipper Body:
* Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall
* Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter)
* Rear stanchions bolted
* Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking
* Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door
* 4 mm steel chequer plate floor
* Rear mounting rail for loading ramps
----Load Securing:
* One 5 t lashing ring per corner
* Four 3 t lashing rings each side, recessed into the outer frame
----Ramps:
* 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles
* Lockable rear storage compartment beneath the loading area, integrated into the chassis
----Paintwork:
* Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized
* Side walls and tailgate painted in RAL 9010 pure white
* Side wall painting in other RAL color shades available for an additional charge
* Axles, springs, flange eye, air tanks, and landing gear painted in black
----Information:
* Reinforced body with cargo securing certificate according to EN 12642 XL
* New vehicle, without initial registration, with manufacturer’s warranty
* Errors and prior sale excepted
----Delivery time:
* Immediately available ex works Egestorf on the A7 Motorway
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTALNeuer 18 to. Kippbarer Container Anhänger
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, RAK 18.0 External Roller with Rearward Tipping Function
----Brake System:
* Wabco EBS-E (electronic braking system)
* Emergency release mechanism for spring-loaded cylinders
* Drum brakes
----Axle:
* BPW Eco Plus axles
----Suspension:
* Air suspension (automatic lowering when disconnecting the brake)
----Towing Bar:
* Pneumatically lowerable drawbar, approx. 2,100 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle
----General Attachments:
* Plastic toolbox - approx. 858 x 500 x 500 mm - mounted right side
* Enclosed plastic mudguards front & rear axle
* Enclosed side underrun protection
* Bolt-on rear underrun protection
* Storage box for container nets made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm
Codjx Ipa Aopfx Abvjgp
* Foldable A-board at the rear
* Rear impact protection buffers
----Electrical / Lighting:
* EBS multi-voltage system for towing vehicles with 12 & 24V electrics
* 15-pin 24V power connector
* LED lighting system for 12 & 24V
* 2 additional LED reverse lights
* RDÜ tire pressure monitoring system
----Suitable for Container Lengths:
* For containers 6,500 mm to 7,000 mm
----Container Running Surface / Tipping Platform:
* External roller guidance through flat steel limits at approx. 2,180 mm clear width, in combination with 3 centering pads per side for container guidance
* For accommodating and supporting the container rollers, there are 2 recessed, tipper frame-connected roller mounts at the rear, with pneumatic safety lock against longitudinal movement
* The positive locking of the roll-off containers is by a pneumatic cross-clamping unit (operable from one side), installed at the front of the tipping frame and accessible externally
* Chassis frame with internally rearward-tipping main frame - hydraulically operated tipping unit (single-cylinder design)
* Tipping angle 42°
* Rubber pads between chassis and tipping frame
* Loading of containers from the front; hot-dip galvanized chassis
----Tyres:
* Single tyres 385/55 R 22.5
----Loading Height:
* Unladen approx. 1,270 mm
----Paintwork:
* Underrun protection and locking parts (unfinished, without top coat)
* Bogie, air tanks, axles, slewing ring, and drawbar painted in black
* Hot-dip galvanized
----Information:
* For container transport according to DIN 30722 Part 1
* New vehicle, no initial registration, with manufacturer warranty
* Subject to errors and prior sale
* Sample photos (vehicle images may vary due to special equipment)
----Delivery Time:
* Available from CW 24/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTALT3 Profi 30,0 Neu, Baggerstiel, Federrampe
Pokliči
Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0:
* EBS braking system
* RDÜ tire pressure monitoring
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 3 x 11 t BPW Eco axles
* Parabolic springs
* Mechanical axle equalization at the rear
* Lateral underrun protection
* Rear swing-down supports on the chassis frame
* Mechanically adjustable warning sign packages front and rear
* Front axle closed plastic fenders and rear axle straight galvanized steel skirts, each with spray protection
* Reflective contour tape on sides and rear
* Foldable cover (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED rear lights
* Removable rotating beacon at the rear
* Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle
* 15-pin power connector
* Four side stake pockets each side (stakes not included), can also be used for lashing
* Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – in the corners 13.4 t, otherwise 10 t
* 6 pairs of mechanical folding outriggers for an overall width of 3 meters (not in the rear slope area)
* Widening planks stored in the center of the loading area
* Excavator arm rest over rear axle up to the end beam approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest)
Csdpjx Ipavjfx Abvogp
* Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm)
* Mechanically adjustable lateral ramp movement
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Unladen loading height: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Unladen loading height: approx. 910 mm (incl. 860 mm approach slope)
* Chassis, turntable, drawbar, and loading ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* 5,900 kg unladen weight
* -- total technical permissible weight of 30,000 kg possible --
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from calendar week 12/2026
* Sample photo
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9:
----Braking System:
* EBS brake system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with equalizer unit
----Drawbar / Drawbar Eye:
* Drawbar height-adjustable by 300 mm
* 40 mm flanged drawbar eye
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic quarter mudguards
* Plastic toolbox mounted on the front right side of the bulkhead
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
----Loading Platform:
* Loading platform length: 6.27 m
* Suitable for container transport
* 50 mm softwood floor
* Provision in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet metal bulkhead
* Trapezoidal-profiled steel drop sides with spring-assisted opening
* Steel rear wall can be inserted between the ramp holders in front of the bulkhead when not in use
* Bolted rear stakes
----Load Securing:
* Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Option to install 3 t recessed lashing rings every 600 mm
* 1 x 6.3 t lashing point in each of the front and rear corners
* Various holes in the front and rear cross members for 1.2 t lashing options
----Ramps:
* Single-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm)
* Rear approach angle approx. 860 mm
----Tyres:
* Tyre size: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stakes and loading ramps
* Sideboards painted RAL 9010 pure white
* Painting of side walls in other RAL colours available at surcharge
----Notes:
* Errors and prior sale reserved
* New vehicle with manufacturer's warranty
Cgsdpfx Ajq Ra D Eebvep
----Delivery Time:
? Available from CW
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tyre pressure monitoring system
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering function
* Fixtures at front wall and rear slope for retrofitting container locks for transporting 20" containers
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing gear at front
* External folding supports at rear
* Plastic toolbox, approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21 t GVW version with reinforced chassis and axles
* Reinforcement package for drilling rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixtures at the front wall for retrofitting container locks
* Bolted front wall made from smooth sheet metal
* Split, folding trapezoidal-profile steel side walls with central drop-in post
* Steel rear wall, retractable between ramps; bracket inside front wall when not in use
* Rear posts bolted
* Perforated external frame bent to approx. 45°, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t recessed lashing rings every 600 mm
* 1 x 10 t lashing point each in the front and rear corners
* Lashing package with 2 x 8 t recessed lashing rings per side in external frame, various holes for 1.2 t lashing in front and rear crossmember
* One-piece mechanical mesh ramp with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible to 20 mm)
* Approach angle at rear approx. 860 mm on chassis
* Drawbar, front wall, rear gate, folding supports and ramps hot-dip galvanized
* Axles, springs, air tanks and landing gear finished in black paint
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tyres: 235/75R17.5
* Sideboard colour freely selectable until about 2 weeks before production date (excluding metallic and special colours)
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
Csdpfsl Tihxsx Abvsgp
* Available from week 15 / 2026
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations
* Drawbar with positive-locking height adjustment and 50 mm flange tow eye
* Landing gear at the front
* Outward-folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
* 15-pin 24 V connector
* LED tail lights 12/24 V integrated in underride guard
* Steel platform - Three-way tipper body made of fine-grained steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder
* Fixed front wall made of smooth sheet metal
* Hardwood pad for excavator bucket, bolted onto the front wall
* Continuous side walls - foldable without centre stanchion, with drop-side spring assists and pendulum function via manual central locking
* Rear posts bolted
* Combination steel swing doors at the rear, asymmetrically split 2-leaf, swivelling up to 270° and lockable, not fold-down, with additional pendulum frame for automatic tailgate opening during tipping process; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open swing doors
* Each corner with 1 x 7 t lashing point, and 4 x 3 t lashing rings per side integrated into the outer frame
* 4 mm steel floor plate
* Two-step access on left front
* Mounting rail at the rear for approach ramps
* Rear compartment for approach ramps integrated into the chassis
Cjdpfxovin Ucs Abvegp
* 1 pair of aluminium approach ramps (10 t per pair) approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles
* --Load securing certificate according to EN 12642 XL?
* Chassis, drawbar, rear posts, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanised
* Side walls KTL-coated, tailgate painted in RAL 9010 pure white
* Painting of side walls in any RAL colour available at extra charge
* Axles, air tanks, flange tow eye, front landing gear painted black
* Subject to errors and prior sale
* Available from calendar week 15 / 2026
* Sample images (vehicle images may vary due to special equipment)
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL21 to luftgef. Tandemtieflader mit 3 mtr Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 16.750 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 21.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release system for spring brake cylinders
* Drum brakes
* 2 x 11-ton Gigant axles
* Air suspension with lifting and lowering device
* Front bulkhead and rear slope: prepared for retrofit installation of container locks for transporting 20" containers
* Drawbar with 50 mm flange eye and height-adjustable drawbar
* Jost landing leg at front
* External foldable supports at rear
* Plastic toolbox approx. 750 x 350 x 300 mm, located right side
* Side underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED lights
* 21-ton GVW design with reinforced frame and axles
* Reinforcement package for drill rig transport on chassis
* 50 mm softwood floor, clamped design
* Front bulkhead prepared for retrofit installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable with center drop stake
* Steel rear wall can be inserted between the ramps; holder for non-use on the inside front bulkhead
* Bolted rear posts
* Perforated outer frame, approx. 45 degree angled, with 2-ton lashing capacity every 480 mm
Cgsdpfjq Dyu Ujx Abvjp
* Possible installation of 3-ton folding lashing rings every 600 mm
* In the corners front and rear, each with 1 x 10-ton lashing ring
* Load securing package: 2 x 8-ton retractable lashing rings per side in the outer frame; various holes in the front and rear crossmembers for 1.2-ton lashing options
* One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be collapsed to 20 mm)
* Rear approach angle approx. 860 mm chassis
* Drawbar, front bulkhead, tailgate, folding supports, and loading ramps hot-dip galvanized
* Axles, springs, air tanks, and landing leg painted black
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Side wall painted in RAL 9010 pure white
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Available from week 15 / 2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL18 to. Tand.-Stahl - Strong -3 Seiten mit Rampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
Cgsdpfxjvin T So Abvep
* Drum brakes
* Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations
* Drawbar with positive-locking height adjustment and 50 mm flange tow eye
* Landing gear at the front
* Outward-folding support legs at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Plastic quarter mudguards
* 15-pin 24 V connector
* LED tail lights 12/24 V integrated in underride guard
* Steel platform - Three-way tipper body made of fine-grained steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder
* Fixed front wall made of smooth sheet metal
* Hardwood pad for excavator bucket, bolted onto the front wall
* Continuous side walls - foldable without centre stanchion, with drop-side spring assists and pendulum function via manual central locking
* Rear posts bolted
* Combination steel swing doors at the rear, asymmetrically split 2-leaf, swivelling up to 270° and lockable, not fold-down, with additional pendulum frame for automatic tailgate opening during tipping process; locking via galvanised rotary bolt lock and central locking; deactivation function for automatic tailgate opening when tipping backwards with open swing doors
* Each corner with 1 x 7 t lashing point, and 4 x 3 t lashing rings per side integrated into the outer frame
* 4 mm steel floor plate
* Two-step access on left front
* Mounting rail at the rear for approach ramps
* Rear compartment for approach ramps integrated into the chassis
* 1 pair of aluminium approach ramps (10 t per pair) approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles
* --Load securing certificate according to EN 12642 XL?
* Chassis, drawbar, rear posts, front wall, tipping bed, underrun protection, rear folding supports hot-dip galvanised
* Side walls KTL-coated, tailgate painted in RAL 9010 pure white
* Painting of side walls in any RAL colour available at extra charge
* Axles, air tanks, flange tow eye, front landing gear painted black
* Subject to errors and prior sale
* Available from calendar week 15 / 2026
* Sample images (vehicle images may vary due to special equipment)
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9:
----Brakes:
* EBS braking system
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axle:
* 2 x 5.5 t BPW axles
----Suspension:
* Parabolic springs with compensating unit
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar, adjustable by 300 mm
* 40 mm flange drawbar eye
----General Attachments:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic quarter mudguards
* Plastic toolbox front right, mounted outside on the front wall
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
Cgjdpfx Ajrvvfwobvop
* LED lighting
----Loading Area:
* Loading length: 6.27 m
* Suitable for container transport
* 50 mm softwood flooring
* Bracket in front of the front wall for subsequent installation of container locks
* Bolted front wall made of smooth sheet metal
* Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assists
* Steel rear wall, stowable between the ramp mounts, if not in use, on the inside in front of the front wall
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm
* Installation of 3 t recessed lashing rings possible every 600 mm
* In the corners, front and rear, each 1 x 6.3 t lashing ring
* Various holes in the front and rear crossmembers for 1.2 t lashing options
----Ramps:
* One-piece mechanical loading ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (can be pushed together up to 20 mm)
* Rear approach slope approx. 860 mm
----Tyres:
* Tyres: 235/75R17.5
----Wheelbase:
* Wheelbase: 990 mm
----Paintwork:
* Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and loading ramps
* Sideboards painted in RAL 9010 pure white
* Painting of side walls in any RAL colour available at extra cost
----Information:
* Errors and interim sale reserved
* New vehicle with manufacturer's warranty
----Delivery time:
Available from calendar week ?
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
Cgodpepk D Ncefx Abvep
* TPMS (tire pressure monitoring system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension
* Drawbar with 50 mm flange towing eye and height-adjustable drawbar
* Jost landing gear at the front
* External folding supports at the rear
* Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black)
* Lateral underrun protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drilling rig transport at the chassis – loading height + 20 mm
* 50 mm softwood floor, clamped version
* Pre-fitted device in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Drop-side walls made of trapezoidal-profiled steel, foldable with drop-side spring-assisted lifting device
* Steel rear wall, can be slid in between the ramps – mounting bracket for storage in front of the bulkhead when not in use
* Bolted rear stanchions
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Option for installation of 3 t folding lashing rings every 600 mm
* In each front and rear corner: 1 x 10 t lashing ring; various holes in front and rear cross members for 1.2 t lashing options
* One-piece mechanical grating-type ramps with spring mechanism for one-man operation, approx. 2,750 x 620 mm (can be slid together up to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized
* Axles, springs, air reservoirs, and landing gear painted in a shade of black
* Wheelbase: 1,310 mm
* Tyres: 235/75R17.5
* Drop-side panels painted in RAL 9010 pure white
* Side panels can be painted in a RAL colour of your choice at extra cost
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Immediately available from Egestorf
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Pokliči
Stanje: novo, največja dovoljena obremenitev: 24.020 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0:
* EBS braking system
* RDÜ tire pressure monitoring
* Emergency release mechanism for spring brake cylinders
* Drum brakes
Csdpel Th I Aefx Abvjgp
* 3 x 11t Gigant axles
* Parabolic springs, mechanical axle compensation at the rear
* Side underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning board sets at front and rear
* Front: closed plastic mudguards; Rear: straight, galvanized sheet steel skirts, each with spray protection
* Reflective contour tape on the sides and rear
* Tool box made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm
* Hinged lid (hot-dip galvanized) for tool box within the turntable platform
* Multi-voltage wiring
* LED tail lights
* Rear warning beacon (detachable)
* Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle
* 15-pin electrical socket
* Four stake pockets per side (stakes not included), also usable as lash points
* Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame; corner rings: 13.4 t, other rings: 10 t
* 6 pairs of mechanical folding extensions for 3 m total width (not at the rear slope)
* Widening boards stored at the center of the load floor
* One-piece, hot-dip galvanized hydraulic access ramps (approx. 3,000 x 720 mm), manually adjustable sideways
* 4-way valve block for hydraulic side ramp retrofit
* Platform above turntable: approx. 1,960 x 2,520 mm
* Unladen platform height: approx. 1,070 mm
* Rear platform: approx. 6,500 x 2,520 mm
* Unladen platform height: approx. 910 mm (incl. 860 mm drive-on angle)
* Chassis, turntable, drawbar, and access ramps hot-dip galvanized
* Axles, springs, air tanks, and related components painted in black
* 235/75 R 17.5 twin tires
* Approx. 5,980 kg unladen weight
* Permissible total technical weight: 30,000 kg
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from week 11/2026
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL18t. Kombi, Abroller Absetzer Tieflader, Parabel
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0:
* Load securing package
* Wabco
* RDÜ tire pressure monitoring system
* EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* 2 x 12 t Gigant axles
* Parabolic springs
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment
* Tool box made of powder-coated steel, mounted on the right side
* Reflective contour tape, side & rear
* Side underrun protection
Cgjdpfx Abjl Thv Rsvep
* Plastic quarter mudguards with splash protection
* Storage box for container nets made of galvanized sheet steel, approx. 960 x 300 x 400 / 450 mm, right side
* Plastic rear impact buffers
* LED taillights
* 15-pin power connector
* Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) for roll container guidance
* Steel floor with roller recesses in bogie area
* For roll-off container transport, container length from 5,500 - 7,000 mm possible
* Pneumatic 4-point clamping lock and mechanically insertable front locking angles in the guide rail, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip containers with a max. volume of 10 m³ possible
* 8 repositionable skip stops for lateral centering of skips, front 4 skip stops inserted with pivoting stops
* 3 pairs of 10 t UVV lashing rings on the side for securing elements to ensure positive and non-positive locking of skips, 4 lashing brackets in cloverleaf design (side) and 1 pair 13.4 t UVV lashing rings to the front, load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700
* Welded bead as anti-slip coating in the ramp area
* Mechanical rear support legs
* 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
* 235/75 R 17.5 twin tires
* 4,360 kg unladen weight
* Gross weight of up to 20,000 kg technically possible
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Mali oglas
Egestorf
860 km
Odvozna prikolica
MÜLLER-MITTELTAL18t. Kombi, Abroller Absetzer Tieflader, Parabel
Pokliči
Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0:
* Load securing package
* Wabco
* RDÜ tire pressure monitoring system
* EBS-E (electronic braking system)
* Emergency release mechanism for spring-loaded brake cylinders
* 2 x 12-ton Gigant axles
* Parabolic springs
* Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and adjustable height
* Tool box made of powder-coated sheet steel, mounted on right side
* Side and rear contour marking tape (reflective)
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Storage box for container nets, galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side
* Plastic rear impact protection buffer
* LED tail lights
* 15-pin electrical connector
* Hot-dip galvanized main frame with elevated outer frame (approx. 25 mm higher) for guiding roll-off containers
* Steel floor with wheel recesses in the bogie area
* Suitable for transporting roll-off containers from 5,500 to 7,000 mm in length
* Pneumatic 4-point locking clamp and mechanically insertable stop angles in the track at the front, load securing certificate according to DIN 30722-1
* Transport of up to 2 skip loaders with a maximum volume of 10 m³ possible
* Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops pluggable with pendulum stop
* 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements for positive and non-positive load securing of skips, plus 4 lashing tracks in cloverleaf design (side) and 1 pair of 13.4-ton UVV lashing rings at the front, load securing certification according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700
* Weld bead as anti-slip covering in the running area of the ramp incline
* Rear mechanical support legs
* 1 pair aluminum drive-on ramps (10.6 tons/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
* 235/75 R 17.5 twin tires
* Unladen weight 4,360 kg
* Technically permissible gross weight 20,000 kg
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Cedpfx Abol Thwcevsgp
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL3- Achs 30 to. Tieflader verz. hydr. Rampe NEU
Pokliči
Stanje: novo, največja dovoljena obremenitev: 24.020 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0:
* EBS braking system
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 3 x 11 t Gigant axles
* Parabolic springs, mechanical rear axle equalization
* Side underrun protection
* Swivel supports at the rear of the chassis frame
* Mechanically adjustable warning sign packages at front and rear
* Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection
* Reflective contour marking tape on the sides and rear
* Tool box made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm
* Folding lid (hot-dip galvanized) for the toolbox on the turntable platform
* Multi-voltage system
* LED tail lights
* Rotating beacon (removable) at the rear
* Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle
* 15-pin electrical plug
* Four stake pockets on each side (no stakes included), with integrated lashing option
* Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t.
* 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope)
* Widening boards stored in the center of the loading area
* Hot-dip galvanized one-piece hydraulic ramp (approx. 3,000 x 720 mm), mechanically adjustable sideways
* 4-section control valve block for retrofitting hydraulic side ramp shifting
* Loading area above turntable: approx. 1,960 x 2,520 mm
* Loading height unladen: approx. 1,070 mm
* Rear loading area: approx. 6,500 x 2,520 mm
* Loading height unladen: approx. 910 mm (including 860 mm approach slope)
* Chassis, turntable, drawbar, and ramps hot-dip galvanized
* Axles, springs, air tanks etc. painted black
* 235/75 R 17.5 twin tires
* Approx. 5,980 kg unladen weight
Cgodol Th Nnepfx Abvop
* Technical gross vehicle weight of up to 30,000 kg possible
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Available from week 11/2026
Mali oglas
Triptis
562 km
Nizki nakladalnik
Müller-MitteltalT40
Pokliči
Stanje: rabljeno, številka stroja/vozila: 39500, lastna masa: 8.250 kg, največja dovoljena obremenitev: 31.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/1995, velikost pnevmatike: 235/75 r17,5 zwilling, Leto izdelave: 1995, Further information
Main and outer frame made of high-strength double-T sections, grade ST 52.3, quadruple longitudinal profiling, with high-webbed front and rear cross-members as well as transverse braces; frame behind the bogie passage features a gently sloping stepped offset and rear loading bevel, 0.8 m long; lowest possible floor height achieved by recessed wheel wells above the rear wheels; leading edges of the bogie platform beveled at 45 degrees. Two recessed UVV lashing rings each on the bogie platform and loading bevel for attaching securing devices. Rear end fitted with wide supports for a ramp shaft with six-fold bearings. Lateral side protection fitted with an EC-compliant guard rail, wheel chocks with clamp lock.
Codpfx Asi Rixgjbvogp
Low-maintenance inclined roller bearing axles with automatic linkage adjusters, two-line pneumatic braking system in accordance with EC regulations, and parking brake.
Bogie and drawbar: Constructed from double-T sections in welded design with ball-bearing turntable; standard drawbar length 1,500 mm, with 8 eyelets (50 mm diameter each), drawbar support with threaded spindle as height adjustment device. Vehicle is not fitted with axle compensation!
24 volts, 2 exchange-proof 7-pin connection cables, large rectangular four-chamber lights including rear fog and reversing lights, front distribution box, rear outline marker lights, side marker reflectors, and holder for single-line license plate.
Undercarriage made of 40 mm thick, pressure-impregnated pine. Low-loader platform and loading bevel with cross-laid top flooring, 30 mm thick, running lengthwise. Total floor thickness 70 mm. Bogie platform with longitudinal single-layer flooring and recessed open tool box, size L 700 x W 800 x H 180 mm.
Ramps: Welded construction with trough plate, transverse braces, longitudinally laid wooden overlay, 50 mm thick; ramp tips reinforced; ramp holding rods with turnbuckle and safety catch; ramps laterally adjustable by 470 mm each, with perforated rail and sliding tube; ramp shaft made of bright steel, articulated spring lifters with external and internal springs for easy one-person operation, with automatic ground supports.
Shot-blasted with steel granulate, zinc phosphate-primed, painted in a single acrylic RAL color of choice; wheels silver. Available in traffic, light, and metallic colors as well as two-tone paint finishes; wood surface is stained.
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalPT 30,0 Kompakt, verbr. auf 3m
Pokliči
Stanje: rabljeno, lastna masa: 6.250 kg, največja dovoljena obremenitev: 23.750 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 930 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m, lashing eyes, mechanical ramps, rear support, side aluminium underride protection, twin tyres, storage box.
Body: 3-axle low loader trailer with mechanical drive-on ramps, 3x 10t Gigant axles, drum brakes, extendable to 3m!
Ramp length approx. 2,900 mm!
Cgjdpfsxvzq Hjx Abvop
ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!
Mali oglas
Legden
847 km
Prikolica z nizko platformo
MÜLLER-MITTELTALTA 14,4 Tieflader Tandem Zwillingsbereift
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 10.790 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 350 mm, Müller-Mitteltal tandem nizkopodni priklopnik
Cgsdpfx Abox Amrpevsp
- Lastna masa: 3.610 kg
- Dovoljena skupna masa: 14.400 kg
- Pnevmatike: 235/75 R17,5
- Dvojne pnevmatike
- Listnate vzmeti
- Bobnaste zavore
- Vlečno uho 40 mm
- TÜV veljaven do: 04.2026
- Poseben tehnični pregled (SP) veljaven do: 10.2026
Pridržujemo si pravico do napak in vmesne prodaje.
Interna številka vozila: 11564
Mali oglas
Wiesmoor
957 km
Prikolica z nizko platformo
MÜLLER-MITTELTALETUE-TA 11,0 Tandem Tieflader
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 7.950 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2010, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.000 kg
Lastna teža: 3.050 kg
Nosilnost: 7.950 kg
Skupna dolžina: 8.100 mm
Nakladalna dolžina: skupno cca 6.000 mm
Širina: 2.550 mm / nakladalna širina cca 2.470 mm
Nakladalna višina: 900 mm
Dodatne informacije
- po višini nastavljiva vlečna ojnica
Codsx E I Utjpfx Abvegp
- podporna noga
- stranske stene 400 mm, vzmetene
- električno kolo
- BPW osi
- rešetkaste klančine z vzmetjo, bočno pomične
- plezalne letve, zadnja podpora
- velik pritrdilni paket
Mali oglas
Lübbecke
828 km
Prevoz zabojnikov
Müller-MitteltalRAK German Fahrzeug
Pokliči
Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 03/2004, Leto izdelave: 2004, Oprema: ABS, = Additional options and equipment =
- Electronic Braking System (EBS)
= Notes =
Müller-Mitteltal RAK German vehicle
Roll-off trailer
2-axle
Air suspension
ABS
Tyres 60%
ID no. 709
We look forward to advising you, signing contracts, or handing over the vehicle at our dealership. Please make an appointment.
If you are unable to visit our showroom, we offer complete processing by phone, email, WhatsApp, or fax.
On request, we deliver your new vehicle directly to your door.
This means you get the best price as well as maximum safety and convenience with your purchase.
We are happy to take your used vehicle as a trade-in.
We offer you the option of a digital vehicle appraisal based on your vehicle photos, even without visiting the dealership.
Our specialised purchasing team offers you a guaranteed top price.
Upon request, we deliver your new ‘used’ vehicle nationwide directly to your doorstep and take your trade-in back with us.
Financing – leasing
Immediate approval and settlement of existing loans.
Your specialist partner for passenger cars, vans, commercial vehicles, and construction machinery.
ITC GmbH & Co KG
Siemensstraße 7
Cgodpoxyx Hajfx Abvsp
32312 Lübbecke (industrial area)
Over 400 vehicles in stock at all times.
The information given in advertisements, on the internet, on price labels, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately by the buyer. Offer is generally without new TÜV approval; we will gladly provide you with an offer from our partner workshop. Subject to errors and prior sale.
= Further information =
Unladen weight: 4,850 kg
Payload: 13,150 kg
Gross vehicle weight: 18,000 kg
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalTP 20,0 TwistLock, Rungen
Pokliči
Stanje: rabljeno, lastna masa: 4.400 kg, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2012, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, 2-axle, turntable trailer, air suspension, lift/lower function, ABS (anti-lock braking system), lashing eyes, container locks, twin tyres, toolbox.
Csdpfxst Uq D To Abvsgp
Body: 2-axle turntable flatbed trailer with insertable stanchions and TwistLock fasteners, TwistLock extendable to 3m. 20t, drum brakes, air suspension, 10t Gigant axles, ramp shaft 40x16cm.
Loading ramps available for an extra charge of €1,000!
ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!
Mali oglas
Bovenden
710 km
Prikolica z nizko platformo
Müller-MitteltalETS-TA-B 10,7
Pokliči
Stanje: rabljeno, lastna masa: 2.380 kg, največja dovoljena obremenitev: 8.320 kg, skupna masa: 10.700 kg, konfiguracija osi: 2 osi, prva registracija: 04/2016, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 5.030 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 325 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, BPW osi, tandem, listnato vzmetenje, ABS (protiblokirni sistem), sidrne zanke, mehanske rampe, sprednja opora, zadnja opora, bočna aluminijasta zaščita, zaboji za orodje, višinsko nastavljiva vlečna droga. Nadgradnja: tandem nizkopodni priklopnik z mehanskimi nakladalnimi rampami, pocinkane rampe, 2x BPW os, bobnaste zavore! Višina nakladanja cca 700 mm! Dolžina ramp cca 2200 mm! PODATKI O DODATNI OPREMI BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak!
Cgjdpfxsxqhltj Abvop
Mali oglas
Sinn
702 km
Odvozna prikolica
MÜLLER-MITTELTALKombiAnhänger F ATL
Pokliči
Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2006, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.250 mm, * Dolly trailer for roll-off & skip containers
* Pneumatic container locking system
* Lowerable drawbar
* BPW air suspension axles
As inspected or offered, without additional services or accessories.
Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be provided with advertising stickers and/or signage.
Our general terms and conditions of delivery and payment apply. We support you with export processing, preparation of export documents, procurement of license plates, supplier declarations, etc.!
The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics.
The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be checked separately if necessary.
We expressly reserve the right to prior sale, as this item is also offered on other platforms. Accessory information is provided without guarantee.
Subject to changes, prior sale, or errors. We offer and strongly recommend a viewing and inspection to avoid any misconceptions regarding condition and suitability by the buyer.
Viewings and inspections are possible at any time by appointment and are expressly encouraged.
Cgsdpfx Abjizy Nyovep
Mali oglas
Göttingen
708 km
Nizki nakladalnik
Müller-MitteltalT3 Kompakt - Dreiachs-Überfahr-Tieflade-Anhänger - Luft - Auffahrrampe
Pokliči
Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Very well-maintained vehicle from first ownership
Three-axle low-loader trailer with drive-over ramps
Low-loader with loading ramp
Heavy-duty transport
Type T3 Komakt 30.0
Length: 8,500 mm
Width: 2,500 mm
Air suspension
Commercial/Export net price – €19,990
Subject to changes, prior sale, and errors.
=====
Telephone 2
Mobile
Codpfx Aben Aw Hkovjgp
=====
Olajšamo vam iskanje: "müller kmetijski stroji"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Müller Kmetijski Stroji (252)
Preiščite zdaj celoten TruckScout24 z več kot 120.000 rabljenimi vozili.Prebrskajte najbolj priljubljene kategorije:
- Bremer Kmetijski Stroji
- Bucher Kmetijski Stroji
- Drugo Kmetijski Stroji
- Dücker Kmetijski Stroji
- Eberhardt Kmetijski Stroji
- Fahr Kmetijski Stroji
- Fischer Kmetijski Stroji
- Hüdig Kmetijski Stroji
- Kerner Kmetijski Stroji


Več kot 140.000 povpraševanj po nakupu mesečno
Izvedite več zdaj
+49 201 858 95 507















































































































































































































































































































































































