Müller Kmetijski Stroji nakup rabljenega (267)

Stanje: novo, največja dovoljena obremenitev: 24.020 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Tool box made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights Fpedel Th Nnopfx Af Ueb * Rotating beacon (removable) at the rear * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included), with integrated lashing option * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Hot-dip galvanized one-piece hydraulic ramp (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control valve block for retrofitting hydraulic side ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical gross vehicle weight of up to 30,000 kg possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: rabljeno, lastna masa: 5.150 kg, največja dovoljena obremenitev: 12.850 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2007, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 600 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, osi BPW, vrtljiva prikolica, zračno vzmetenje, dviganje in spuščanje, ABS (protiblokirni sistem), pritrdilne zanke, blokada kontejnerja, U-zaščita, bočna aluminijasta zaščita, dvojne pnevmatike, zaboj za orodje, nihajna vrata. Nadgradnja: 2-osna ploščadna prikolica z aluminijastimi stranskimi stenami in twist-lock zaporami, 2x BPW osi, bobnaste zavore! Nakladalna višina ca. 950 mm! Podatki o dodatni opremi brez garancije, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Fpedpsx A H S Ajfx Af Uob

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, stanje pnevmatik: 100 odstotek, Leto izdelave: 2025, vrsta goriva: dizel, The fully automatic cable trailer for tomorrow’s technology. The KWH from Müller-Mitteltal is a specialized vehicle that has proven itself over decades. Convincing technology and automated workflows make it the perfect cable transport and laying trailer. The payload is approx. 6.0 t with an 8.8 t GVW. Technical Specifications: Single-axle cable transport trailer with motor-hydraulic operation Superstructure: Swiveling cable drum mount Stabilization: Geared support winch at the front, rear with extendable tubular supports, hydraulic rear stabilization optional Fedsvvvqfepfx Af Uspb KWH 8.8 Gross vehicle weight: 8,800 kg Payload: 6,000 kg Tongue load: 800 kg Drum diameter: 800 - 3,000 mm Clear width between drum arms: 1,700 mm Tyres: 315 / 80 R 22.5

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2000, dolžina tovornega prostora: 10.790 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna dolžina: 14.790 mm, skupna širina: 2.500 mm, vzmetenje: jeklo, Leto izdelave: 2000, Dodatne informacije: Znamka: MÜLLER MITTELTAL Model: TS4 Zgradba: nizkopodni priklopnik (platforma D=10790 mm / Š=2500 mm / V=950 mm) Leto: 2000 Vzmetenje: jekleno Zavore: bobnaste Dimenzije: D/Š: 14790 mm / 2500 mm Mase: polna/prazna: 57.000 kg / 11.800 kg HIDRAVLIČNE RAMPE / JEKLENO VZMETENJE / BOBNASTE ZAVORE = Več informacij = Fpedpfx Afjuwu Ezs Ujb Vzmetenje: listnato vzmetenje Lastna masa: 11.800 kg Nosilnost: 45.200 kg Dovoljena skupna masa: 57.000 kg Za več informacij kontaktirajte Andrei Somova, Marka Ševtšenka ali Denissa Urmakerja

Stanje: rabljeno, največja dovoljena obremenitev: 7.950 kg, skupna masa: 11.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2010, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.000 kg Lastna teža: 3.050 kg Nosilnost: 7.950 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: skupno cca 6.000 mm Širina: 2.550 mm / nakladalna širina cca 2.470 mm Nakladalna višina: 900 mm Dodatne informacije - po višini nastavljiva vlečna ojnica - podporna noga - stranske stene 400 mm, vzmetene Fsdpfx Afsx E I Uts Ujpb - električno kolo - BPW osi - rešetkaste klančine z vzmetjo, bočno pomične - plezalne letve, zadnja podpora - velik pritrdilni paket

Stanje: rabljeno, lastna masa: 7.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2006, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 9.100 mm, širina tovornega prostora: 2.750 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, barva: siv, Oprema: ABS, Bobnasta zavora Nosilnost 22.200 kg Gumijasta tla Hidravlične dvojne rampe in hidravlični pomik Gigant osi Fjdpfxowh Rwvs Af Uepb Pridržujemo si pravico do napak

Stanje: novo, največja dovoljena obremenitev: 12.080 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Lateral underrun protection * Foldable A-frame shield at the rear ----Electrics / Lighting: * 15-pin power socket * Multi-chamber taillights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate support 750 x 1,000 mm at the front, incl. 2 interchangeable skip stops at the front, plug-in at 2 positions each * Rear crossmember designed for aluminum loading ramps, incl. 2 additional drop-down supports at the rear ----Loading Edge: * Unloaded loading height approx. 710 mm ----Load Securing: * 4 repositionable skip stops, can be placed in 2 positions for lateral centering of skips * Each side with 1 x (13.5 t) UVV tie-down point for securing lashings * 2 ratchet tensioners (spindle adjustment) with balancing chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paint / Finish: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, landing gear, and air tanks painted in black ----General Information: * Vehicle has a day registration from 06/2024 due to missing tire pressure monitoring system and has not been loaded/used Fpjdpfx Afel Th Dmj Ueb * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, največja dovoljena obremenitev: 10.790 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 01/2023, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 6.280 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 350 mm, Müller-Mitteltal tandem nizkopodni priklopnik - Lastna masa: 3.610 kg - Dovoljena skupna masa: 14.400 kg - Pnevmatike: 235/75 R17,5 - Dvojne pnevmatike - Listnate vzmeti - Bobnaste zavore - Vlečno uho 40 mm - TÜV veljaven do: 04.2026 - Poseben tehnični pregled (SP) veljaven do: 10.2026 Pridržujemo si pravico do napak in vmesne prodaje. Fedpfx Afsx Amrpo Uopb Interna številka vozila: 11564

Stanje: rabljeno, lastna masa: 3.280 kg, največja dovoljena obremenitev: 14.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 09/2013, vzmetenje: zrak, velikost pnevmatike: 265/70 R19,5, medosna razdalja: 5.030 mm, Oprema: ABS, Müller-Mitteltal hooklift trailer | Toolbox | Hot-dip galvanized | Tyres: 265/70R19.5 | BPW disc brakes | TÜV valid until | Subject to errors, input mistakes, and prior sale. Fsdpfx Afjwd Sdcj Ujpb

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2001, skupna dolžina: 10.000 mm, skupna širina: 2.510 mm, vzmetenje: jeklo, Leto izdelave: 2001, Dodatne informacije: Znamka: MÜLLER MITTELTAL Model: T 3 Zgradba: platforma ( platforma D=8400 / Š=2510 / V=940 mm ) Leto: 09.2001 Vzmetenje: jeklo Zavore: bobnaste Dimenzije: D/Š: 10000 mm / 2510 mm Mase: polna/prazna: 24000 kg / 6100 kg = Več informacij = Vzmetenje: listnate vzmeti Lastna masa: 6.100 kg Nosilnost: 17.900 kg Dovoljena skupna masa: 24.000 kg Fedpfx Afouwvbqo Uopb Za dodatne informacije se obrnite na Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche ali Deniss Urmaker.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 03/2015, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 5.300 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 11.900 kg Lastna teža: 3.150 kg Nosilnost: 8.750 kg Skupna dolžina: 7.700 mm Nakladalna dolžina: skupaj ca. 5.300 mm Širina: 2.550 mm / Nakladalna širina ca. 2.500 mm Višina nakladanja: 900 mm Dodatne informacije: - Stranice 400 mm, zložljive, vzmet stranice - Zadnja stranica - Podporne noge spredaj + zadaj - Razdeljene vzmetne rampe, stransko pomične, dolžine ca. 3.300 mm - BPW osi Fedpfxex E I Ugo Af Uspb - Velik paket za privez tovora - Zaščita proti podletu

Stanje: rabljeno, največja dovoljena obremenitev: 29.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2017, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 14.910 mm, širina tovornega prostora: 2.520 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Oprema: ABS, Low bed 5500 mm, extendable to 3000 mm, foldable extensions, loading height: approx. 630 mm, gooseneck dimensions (LxW) 3510x2485 mm, aluminum side walls 400 mm, height difference between gooseneck and bed: 845 mm, high bed 4220 mm, rear ramp: 870 mm, front ramp: 880 mm, hydraulically operated ramps, laterally adjustable (LxW) 2800x800 mm, electro-hydraulic unit for hydraulic functions, NATO jump-start socket, 8 heavy-duty lashing rings per side, 3 lashing brackets per side, rotating beacon, support winches, folding rear supports, extendable warning boards, ABS, EBS, BPW Eco axle(s), hydraulically forced steering axles, drum brake system, air suspension with lift-lower function. Vehicle may be wrapped or labeled with advertising. Our offer does not include a new technical inspection (TÜV) by default. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may be wrapped or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Fpedpsxvwb Iefx Af Usb Please contact us!

Stanje: novo, največja dovoljena obremenitev: 14.680 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when decoupling the brake) * Towing drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 450 x 470 mm, mounted right side * Side net box 1,000 x 500 x 500 mm * Closed plastic fenders, front and rear axles * Closed side underrun protection usable as advertising space * Rear underrun protection * Plastic rear impact protection buffer * Rear hazardous goods sign * 15-pin electrical socket * LED tail lights * Runway length approx. 6,830 mm * Pneumatic 4-point clamp locking system * Mechanically adjustable stop angles (2 positions) front left and right on the guideways * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * -- Technical permissible gross weight of 20,000 kg -- Fjdpjv Nulzefx Af Uspb * Approx. 1,130 mm ride height when loaded * Suitable for 5,500 - 7,000 mm container lengths * Hot-dip galvanized chassis * Air tank, axles, slewing ring and drawbar * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 09/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Leto izdelave: 2010, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm, German trailer, second owner Technical Data Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading. Dimensions: - Gross weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread Features: - ABS/EBS connection according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer rails for container guidance, hot-dip galvanized - Container locking: The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails. - 2x 9t BPW 420 mm drum brake axles with air suspension - Air suspension with lowering function - Frame: welded steel construction - Brake system: two-line EBS-compliant (EU standard) - DUOMATIC coupling head - Spring-loaded parking brake - Electrics: 24 volts - Multi-chamber rear lights - 15-pin plug with connecting cable - Lighting according to EU regulations - Rims: factory silver - Underrun protection: aluminum profiles - Wheel chocks with holders - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Delivery available at extra cost All information subject to change! Sale to businesses or for export only! NOTE: PRICE IS NET PLUS VAT Fedpfx Afsvg T Nyo Ujpb German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: rabljeno, največja dovoljena obremenitev: 29.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2010, naslednji pregled (TÜV): 05/2026, Mera-B 11.750 mm Lastna teža 10.250 kg Obremenitev osi 2 x 10.000 kg Fpjdpjxpmmmjfx Af Ujb Nakladalna dolžina nad vrtečo ploščo 2.400 mm vklj. 350 mm poševnine Nakladalna dolžina 7.700 mm vklj. 900 mm poševnine Višina nalaganja 880 mm Širina 2.550 mm, razširljivo na 3.000 mm Utornica za odlaganje izkopalnega kraka (DxŠxV cca 2.500 x 740 x 180 mm) SAF osi z zračno vzmetenjem 2-delne hidravlične rampe, 2.100 mm + 2.000 mm dolge, 650 mm široke vklj. Rampe hidravlično nastavljive Hidravlična podpora zadaj Izsek za kolo za drugo osjo Izsek za sprednje kolo, zgoraj dolžina cca 2.000 mm x 1.100 mm, spodaj globina cca 350 mm Izseki za kolesa med 3. in 4. osjo Izsek za zadnje kolo, zgoraj dolžina cca 1.300 mm x 550 mm, spodaj globina cca 220 mm

Stanje: rabljeno, največja dovoljena obremenitev: 22.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2002, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Skupna teža: 24.000kg/ 30.000kg Lastna teža: 7.500kg Nosilnost: 16.500kg/ 22.500kg Skupna dolžina: 11.600mm Nakladalna dolžina: skupno cca 9.250mm/ nizkopodnožni del cca 7.150mm/ dvignjen del 2.100mm Širina: 2.550mm/ nakladalna širina cca 2.500mm Višina nakladalne površine: 900mm Dodatne informacije - Kolesne vdolbine - Vdolbina za roko bagra - Hidravlične rampe, deljene, cca 640x3.300mm Fpodpfsx E I Uajx Af Usb - Razširitev 3m - Opozorilne table - Shranjevalni prostor pod nakladalno površino - Velik komplet za privezovanje - Shranjevalni prostor v dvignjenem delu - Žepki za količke - LED vzvratne luči - Dvojna montaža 235/75R17,5 - BPW osi - Zaščita proti podvozu Na voljo takoj tudi novi in rabljeni nizkopodnožni priklopniki s 3 ali 4 osmi. Več informacij na

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle compensation * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Side and rear contour markings, reflective * Foldable lid (hot-dip galvanized) for the tool box on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * 15-pin power connector * Each side with 4 stake pockets (stakes not included) and integrated lashing options * Cargo securing package consisting of: 2 lashing eyes (6.4 t) front left & right, on the main frame of the turntable platform; 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions, flush-mounted in the outer frame – in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not available in rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest from rear axle up to end crossbeam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * Hydraulic one-piece access ramps (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment Fpsdpfxol Thxae Af Ueb * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach ramp) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc., painted black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical GVW up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 09/2026

Stanje: rabljeno, največja dovoljena obremenitev: 22.300 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2008, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 24.000 kg / 30.000 kg Prazna masa: 7.700 kg Nosilnost: 16.300 kg / 22.300 kg Skupna dolžina: 11.500 mm Fpjdpfx Aex Egxujf Usb Nakladalna dolžina: skupno 9.000 mm / zadnji del 1.000 mm Širina: 2.550 mm / nakladalna širina 2.540 mm Nakladalna višina: ca. 950 mm Dodatne informacije - Hidravlične rampe, deljene, ca. 4.000 mm dolge x 790 mm široke - Rampe obložene z gumo - Dvojna pnevmatika 235/75R17,5 - Gigant osi - Opozorilne table spredaj in zadaj - Velik paket pritrjevalnih sredstev - Podvozna zaščita - Orodne omarice levo, desno, spredaj - Zadnja opora

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets, made of galvanised sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear crash protection buffers * Mechanical rear support legs ----Container / Low-loader Platform: Fjdjpk D Awepfx Af Uopb * Hot-dip galvanised main frame with raised outer frame (approx. 25 mm raised) to guide rolling containers * Steel floor with roll recesses in the bogie area * For roll-off container transport: container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically insertable end stops at the front of the guide tracks * Load securing certificate to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 repositionable skip stops for lateral centring of the skips, front 4 skip stops inserted with pendulum stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to secure skips in both friction-fit and positive-locking manner * 4 lashing bars in cloverleaf design (on sides) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded anti-slip strip in the running area of the ramp incline * 1 pair aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Finish: * Side and rear reflective contour marking * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanised main frame ----Info: * Technical gross weight of up to 27,000 kg possible * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 20/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Mechanical drop-down supports at rear Fodpfxstplv Tj Af Ujpb ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with recesses for rollers in the bogie area * When transporting roll-off containers, container lengths from 5,500 – 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical plug-in stop angles at the front in the running track * Load certificate according to DIN 30722 – 1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops secured with pivoting stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning devices for form-fit and force-fit securing of skips * 4 cloverleaf-shaped lashing points (sideways) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the approach ramp’s running area * 1 pair of aluminum loading ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Ride height loaded approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Main frame hot-dip galvanized ----Information: * Technically permitted total weight of 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from week 20/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual rear lowering ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper guard * Mechanical drop-down supports at rear ----Container / Lowbed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point locking clamp and mechanically insertable stop angles at the front in the running tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of the skips, the front 4 skip stops are insertable with swiveling stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for form- and force-fit securing of the skips * 4 cloverleaf-type lashing points per side and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the drive-on ramp area * 1 pair of aluminium ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height loaded approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tank painted in black * Hot-dip galvanized main frame ----Information: * Technically permitted gross weight of 27,000 kg possible * New vehicle without first registration, with manufacturer's warranty Fpodpfxopk D Iis Af Usb * Errors and prior sale excepted ----Delivery time: * Available from CW 20/2026

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * Wabco EBS-E braking system * Emergency release device for spring-loaded brake cylinders * Drum brakes * Duomatik brake connection * 2 x to. SAF axles * Air suspension with lowering function via radio remote control * 1st axle lift axle (fully automatic) * Lift axle with driving height +30 mm via adjustment cylinder * Start-assist for maneuvering and forced lowering on the first axle - switched by speed-dependent EBS electronics - (without truck-side installation, additionally with cable for operation from the tractor) * 50 mm flanged towing eye - height-adjustable by +77 mm and -33 mm - for 2 to. support load * BPW landing gear support at the front * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights operated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connecting cables, suitable for agricultural and forestry vehicles * Radio power supply 12+24 V via tail light * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminum rims * Detachable pin tow coupling (use only when underrun protection is retracted) * Closed plastic half-shell single mudguards * Two-step access in front of the front bulkhead, on left side (FR) * Shovel and broom holder in front of the bulkhead Fpjdpsx Dp Atofx Af Usb * 2 stainless steel toolboxes - matt finish - approx. 650 x 350 x 320 mm, right side * Closed side underrun protection can be used as advertising platform * 2-circuit hydraulic connectors (from engine side of truck/tractor), designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on right side, FR), operated via radio remote * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Base frame made from high-strength fine-grain steel * 20,000 kg traction force * Hook height 1,570 mm * Hooklift controls via radio remote control * Remote with fast roll-off function (not for pick-up) * Emergency stop switch on both left and right sides * Container support with 4 pads on each side, plus 1 roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting * 2 x mechanical drop-down rear supports * Approval for 20 to. gross weight (2 x 9 to. axles) and 2 to. support load * Unladen loading height approx. 1,300 mm with lowered lift axle * Note: If the radio remote is outside the charging station, the service brake must be engaged to enable remote operation. Brake connections must remain connected to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted during tipping * Chassis, drawbar, access steps, underrun protection, and drop supports are hot-dip galvanized * Axles, air tanks, and front landing gear are painted in black tone * Palfinger hooklift painted black/yellow * Errors and intermediate sale reserved * Vehicle is in very good/as-new condition * Vehicle is immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection * 2 x SAF axles (rated for 2 tons each) * Air suspension with lowering function via radio remote control * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm ride height adjustment via actuator * Traction assist for maneuvering and forced lowering onto the first axle - controlled by speed-dependent EBS electronics - (no installation required on the truck, additionally supplied with cable for operation from the tractor) * 50 mm flange towing eye - height-adjustable by +77 mm and -33 mm - for 2 ton vertical load * BPW landing gear (front support winch) * 15-pin electrical connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights, switch-activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connector cables for agricultural and forestry vehicles * Wireless power supply 12+24V via tail light * Mechanically extendable underrun guard for container lengths over 6,000 mm * Speedline diamond-cut aluminum rims * Hitch pin tow coupling (only to be used when the underrun guard is retracted) * Closed plastic half-shell single mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, mounted right side * Closed side impact protection, can be used as advertising panel * 2-circuit hydraulic couplings (vehicle-side, from truck/tractor), rated for 180 bar (tractor use) * Double-acting hydraulic circuit for tailgate (mounted front right) with control via radio remote control * Palfinger PHT 20 SCASNSLD5 telescopic hooklift unit (serial no. 100746129, year 2023) * Main frame made of high-strength fine-grain steel * 20,000 kg drawbar pull * Hook height 1,570 mm * Control of the hooklift unit via radio remote control * Remote with quick function for roll-off, not for pull-on * Emergency stop switches on both left and right sides * Container mounting with 4 lateral supports each side plus 1 roller at the rear per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with lifting the main arm * 2 x mechanical drop-down supports at the rear * Certified for 20 ton gross vehicle weight (2 x 9 ton axles) and 2 ton vertical load * Unladen loading height approx. 1,300 mm with lowered lift axle * Note: If the radio remote control is outside the docking station, the service brake must be engaged to enable radio operation. The brake connections must remain permanently connected to allow activation of the hydraulic/pneumatic control valves. * Monitoring system for the underrun guard to ensure it is retracted during tipping * Chassis, drawbar, access step, underrun guard, and drop-down supports hot-dip galvanized Fpodsx Dp Amjpfx Af Ueb * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow * Subject to errors and prior sale * Vehicle is in very good / as-new condition * Vehicle is available immediately

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling * 2 x SAF axles (2 tons each) * Air suspension with lowering function via radio remote control * 1st axle as a (fully automatic) lift axle * Lift axle with driving height +30 mm via adjustment cylinder * Start-assist function for shunting purposes and forced lowering on the first axle – controlled by speed-dependent EBS electronics – (no installation required on truck side, additionally with cable for control from tractor) * 50 mm flange drawbar eye – height-adjustable by +77 mm and -33 mm – for 2-ton vertical load * BPW landing gear jack at front * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics Fpedpfx Afox Dp Ags Ueb * Extended connecting cables for agricultural and forestry vehicles * Power supply for wireless control 12+24 V via tail light circuit * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-cut aluminum wheels * Detachable pin tow coupling (use only when underride guard is retracted) * Enclosed plastic single mudguards * Two-step access ladder in front of bulkhead, driver's side * Shovel and broom holder in front of bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising panel * 2-circuit hydraulic connectors (engine side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on driver's side rear) with radio remote control operation * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year of manufacture 2023) * Base frame made of high-tensile fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift control via radio remote control * Remote control with quick function for tipping, but not for winching * Emergency stop switches on left and right sides * Container mounting with 4 lateral supports and one roller each at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop-down supports at the rear * Approved for 20 tons gross weight (2 x 9-ton axles) and 2-ton vertical load * Loading height unladen approx. 1,300 mm with lowered lift axle * Note: If the remote control is outside the charging cradle, the service brake must be engaged to enable radio release. The brake connections must remain permanently attached to allow hydraulic/pneumatic valve actuation. * Monitoring system for underrun protection to ensure it is retracted when tipping * Chassis, drawbar, access steps, underride guard, and drop supports hot-dip galvanized * Axles, air tanks, and landing gear jack in front painted in black * Palfinger hooklift painted in black/yellow * Errors and prior sale excepted * Vehicle is in very good / as-new condition * Vehicle available immediately

Stanje: novo, največja dovoljena obremenitev: 13.650 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display possible in truck via EBS signal (without truck-side installation) * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 t axles * Air suspension with manual lowering at rear * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right side * Side and rear reflective contour tape * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bump stops * Foldable A-sign at rear * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised external frame for guiding roll containers * Steel deck with roll recesses in the bogie area * Suitable for roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp lock and mechanically insertable front guide blocks in the track * Load securing certificate according to DIN 30722-1 * 1 transport of up to 2 skip containers with max. 10 m³ volume possible * 8 exchangeable skip stops for lateral centering of the skips, front 4 skip stops plugged in with swiveling retaining block * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for friction- and force-fit securing of the skips, 4 lashing bars in cloverleaf design (side) each and 1 pair of 13.4 t UVV lashing rings at the front * Lashing package with additional 4 x 8 t lashing eyes each side integrated into the outer frame * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in the running track area of the ramp slope * Mechanical drop-down supports at rear Fpsdpfx Aol Tld Ief Ueb * Aluminium loading ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible gross weight technically up to 20,000 kg-- * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf