Müller-Mitteltal Zamenljivo Ohišje nakup rabljenega (241)

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, Oprema: ABS, * T 3: Dksdpetplwfjfx Ab Nsu * ABS braking system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning panels at the front & rear * Front closed plastic mudguards and rear straight galvanized steel fenders, each with splash guards * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - powder-coated black - mounted on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four side stake pockets each (no stakes supplied), also usable as lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant lashing rings, swivelable and lowerable * Loadable in all directions and recessed into the outer frame corners: 13.4 t, elsewhere 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening planks stored in a compartment under the loading platform * Digger arm rest from rear axle to end crossmember, approx. 2,100 mm long (2 pairs 6.4 t lashing rings fitted to the side of the digger arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load-holding valves, hydraulically adjustable ramp shift (sideways) * Hydraulic flow divider in trailer (for truck hydraulic pump output over 40 l/min up to max. 140 l/min), dual-line hydraulics * Platform over turntable: approx. 1,960 x 2,520 mm * Rear platform: approx. 6,500 x 2,520 mm (including 860 mm approach slope) * Loaded platform height approx. 860 mm +/- 30 mm with compensation unit * Chassis, turntable, folding outriggers, rear drop supports and drive-on ramps hot-dip galvanized * Axles, springs, drawbar, air tanks, etc. painted black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from CW 03/2026

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2008, 4-osni niskonoseči priklopnik, moguće prelaženje. Dozvoljena ukupna masa 40.000 kg, korisna nosivost 31.820 kg. Transportna platforma cca 9.800 mm (2.400+7.400 mm) x 2.550 mm, sklopiva proširenja do 3.000 mm, sigurnosni paket za prekomernu širinu, rotaciono svetlo, ležište za bagerski krak, visina utovara cca 900 mm. 12 prstenova za vezivanje, 12 kuka za vezivanje na spoljnem okviru. Hidraulične rampe cca 3.000 x 650 mm. SAF osovine, EBS, parabolično ogibljenje sa kompenzacionim agregatom, pneumatike 235-75R17.5. Kutija za alat. Hidraulične podupirače pozadi. Vučna ruda 50 mm. Hidraulika sa 2 vodiča, vazdušni sistem sa 2 vodiča (Duomatik), 24 Volta. Žuta boja. Prodaje se u postojećem stanju. = Dodatne informacije = Dimenzija pneumatika: 235-75R17.5 Opruge: parabolične Tara: 8.180 kg Dksdpeuuxg Nofx Ab Nou Nosivost: 31.820 kg Dozvoljena ukupna masa: 40.000 kg Zemlja proizvodnje: Nemačka Za više informacija, obratite se Janu-Marcu Schwickertu.

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 13.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 900 mm, prva registracija: 07/2010, skupna širina: 2.550 mm, Skupna teža: 18.000 kg Lastna teža: 4.500 kg Dodpfoxbwicex Ab Neku Nosilnost: 13.500 kg Skupna dolžina: 10.200 mm Nakladalna dolžina: 8.200 mm Širina: skupna širina 2.550 mm / nakladalna širina 2.450 mm Višina nalaganja: ca. 900 mm Dodatne informacije - Škatla za orodje - Zadnji naklon - Sprednja snemljiva stena - Rešetkaste rampe 2.650 mm - BPW osi - Obročki za pritrditev težkega tovora 11 parov - 400 mm Kinnegrip preklopne stranice - Dvojna kolesa - Zračno vzmetenje - Zadnja podpora - Hitrospustni ventil - Vlečna oko 50 mm

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Dodpswmpbdofx Ab Njku Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: rabljeno, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, dolžina tovornega prostora: 4.990 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 870 mm, prva registracija: 11/1999, Oprema: ABS, 3-stranski kiper nadgradnja, jeklene stranice 880 mm, nastavljiva vlečna oj, vlečni obroč 50 mm, Jost podporna noga, ABS, BPW Eco os(i), bobnaste zavore, zračno vzmetenje, vzvratne luči, vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Naša ponudba je načeloma brez nove TÜV tehnične pregleda. Če želite nov TÜV pregled, vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko polepljeno in/ali označeno z oglaševanjem. Veljajo naši splošni pogoji dostave in plačila. Za to vozilo vam z veseljem pripravimo ponudbo za financiranje ali leasing. Prosimo, kontaktirajte nas! Dodpfew Ndqqsx Ab Noku

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.750 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, Leto izdelave: 2025, Oprema: ABS, * Müller Mitteltal KaTaR 19 tandem three-way tipper trailer with aluminium drop sides and roll tarp * NEW VEHICLE, never registered * Available from December 2025 Reference number for inquiries: 24990 * Also available to order in your desired RAL colour and with customised equipment * Please request a quote from us! * Gross vehicle weight: 19t, payload: 14.75t * EBS with RSS (roll stability support) * Body: continuous asymmetrical aluminium side walls, 900mm high * Front and rear wall: 900mm high, made of steel * Body dimensions: 4,995mm x 2,380mm x 900mm, finished in RAL 9016 traffic white * 2 spring-assisted side wall lifters * 4 pairs of lashing rings recessed and foldable in 5mm steel floor, LC 3000 daN each * 1t support load, with accordingly increased payload * BPW Eco axles, air suspension, drum brakes, tyres: 385/65R 22.5 * Folding underrun protection for paver loading, galvanised Dkedpewr Sbqofx Ab Nju * Adjustable drawbar with 50mm towing eye, offset +77mm/+33mm * Front support leg with crank handle * 2 LED reversing lights * Front wall platform made of grating with access step and grab handles on the front wall * Roll tarp, fixed installation right in direction of travel, tarpaulin removable (for folding down the right side wall remove the tarpaulin), agate grey ---- * Financing available via our partners FM LeasingPartner or MMV Leasing for terms from 24 to 72 months, with or without down payment, with or without residual value. * Please request a quote! * Leasing, hire purchase, financing, trade-in possible ----* Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours available by appointment * We speak German, English, Russian, Polish, French * Leasing, financing, trade-in available

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS Djdpfxsv Dz N Ae Ab Noku * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem balancing unit * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye * Jost mechanical landing gear at the front * Two rear mechanical, hot-dip galvanized folding supports * Toolbox made of galvanized sheet steel, right side * 15-pin power connector * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking brackets as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous side walls, foldable without central stanchion, with drop-side spring lifts * Rear tailgate foldable and swinging, operated via manual central locking * Hot-dip galvanized, bolted rear stanchion * 1 x 5 t recessed, foldable lashing ring in each corner and 4 x 3 t recessed, foldable lashing rings on each side in the outer frame * 4 mm steel floor * Rear guide rail for loading ramps * Body reinforced with EN 12642 XL load securing certificate * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment beneath the loading platform, integrated into the chassis at the rear * Tires: 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in black * Drop-side painted in RAL 9010 pure white * Painting of side walls in a custom RAL color available at extra charge * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 49/2025

Stanje: rabljeno, skupna masa: 33.500 kg, največja dovoljena obremenitev: 25.800 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, prva registracija: 07/2011, Leto izdelave: 2011, Oprema: ABS, Condition: very good, drum 75% Dksdpou Ear Aofx Ab Nsu Tyres: 70%

Stanje: rabljeno, skupna masa: 8.600 kg, lastna masa: 2.650 kg, največja dovoljena obremenitev: 5.950 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.520 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 500 mm, prva registracija: 05/1996, barva: modra, številka stroja/vozila: 3795,

Stanje: rabljeno, lastna masa: 3.370 kg, največja dovoljena obremenitev: 8.630 kg, obratovalna teža: 12.000 kg, prva registracija: 10/2011, naslednji pregled (TÜV): 06/2024, vzmetenje: zrak/zrak, velikost pnevmatike: 235 / 75 R17.5 / 10mm, skupna dolžina: 9.600 mm, skupna širina: 25.500 mm, skupna višina: 10.500 mm, velikost sprednje pnevmatike: 235 / 75 R17.5 / 10mm,

Stanje: rabljeno, skupna masa: 11.900 kg, lastna masa: 3.190 kg, največja dovoljena obremenitev: 8.710 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.250 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 350 mm, prva registracija: 01/2018, vzmetenje: jeklo, barva: rdeča, vrsta prenosa: mehanski, skupna dolžina: 8.433 mm, Oprema: ABS, Dolžina rampe 2700, širina 600, osi Gigant, vzmetni akumulator, bobnaste zavore, ABS, Duomatik, 15-polni. Nezavezujoča ponudba – spremembe in vmesna prodaja pridržane – prodaja brez kakršnekoli garancije – vse informacije brez jamstva! Dkedpfxow Nrg Ho Ab Nsu

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 11.050 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps – NEW VEHICLE * Available mid-September 2025 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Enquiry no. 24906 * Brake wear indicator with display capability in the truck via EBS signal * Side marker lights with indicator control * Gross weight: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swinging, folding, and removable, prepared for later retrofitting of side extension boards * Lockable compartment under tilt bridge for access ramp * Incl. 1 pair of aluminium loading ramps, 8t per pair, 3.57m * Chassis galvanised, front wall galvanised * 4 UVV lashing rings LC 5000daN at the front and rear + 8 recessed and folding lashing eyes LC 3000daN centred in the tipper bed * Hardwood excavator bucket rest * 2-step access in front of the front wall (galvanised) * Continuously height-adjustable drawbar, galvanised, 40 mm towing eye * Wide tyres 385/55R 19.5 (quadruple), parabolic springs * Net hooks, bolted rear posts, galvanised * Tension cables for the rear drop side * Plastic toolbox mounted on the right side of the chassis frame * LED lighting system 12 + 24 volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: * e.g. €550 for 60 months with no down payment, no final residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! * We are Müller-Mitteltal authorised distributor ---- Our business hours Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside of business hours, we are available by appointment We speak German, English, Polish, French. Dkodpfx Aewvx Tbob Nju Whatsapp / Facetime

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.670 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinder * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensating unit * Height-adjustable hot-dip galvanized drawbar (approx. 300 mm) with 40 mm flange towing eye * Jost mechanical landing gear at the front * Rear: 2 mechanical hot-dip galvanized folding supports * Toolbox made of galvanized sheet steel, right side * 15-pin power plug * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking mounts, as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel platform body, three-way tipper * Continuous drop sides without center stanchion, folding down with drop side spring lifters * Tailgate folds down and can swing by manual central locking * Hot-dip galvanized bolted rear stanchion * 1 per corner: 5 t recessed and foldable lashing rings, plus 4 x 3 t lashing rings per side, recessed and foldable in the side frame * 4 mm steel plate floor * Rear ramp guides for drive-up ramps * Body reinforced, load securing certificate according to EN 12642 XL * 1 pair aluminum drive-up ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment underneath the loading platform, integrated into the chassis, accessible from the rear Dkodpfxeq Hg Dxo Ab Nou * Tyres 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Side boards painted RAL 9010 pure white * Side panels can be painted in an RAL color of your choice for an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 49/2025

Stanje: rabljeno, skupna masa: 40.000 kg, največja dovoljena obremenitev: 31.600 kg, konfiguracija osi: 3 osi, prva registracija: 12/2001, Oprema: ABS, Vehicle identification number: WMM0000010046004 Unladen weight: 8,400 kg Djdewwd R Ispfx Ab Noku German roadworthiness inspection (HU): due BPW Eco axles with drum brakes Leaf spring suspension Upper deck length: 2,500 mm – loading height: 1,070 mm Lower deck length: 7,200 mm – loading height: 885 mm Drawbar – 50 mm Hydraulic ramps, split – length 2,000 + 1,300 mm – width 660 mm Support legs Tyres: 235/75 R 17.5 Modifications, prior sale, and errors excepted. The description serves for general vehicle identification and does not constitute a warranty in the legal sense. The contractual description as per the purchase agreement is legally binding. Our offers generally do not include a new technical inspection (TÜV certificate). If a new TÜV certificate is required, we will be pleased to provide an offer from our partner workshops. Vehicle may feature advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 11.050 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - Truck Tandem Three-Side Tipper - Payload (standard) approx.: 11,050 kg - Increased total weight up to 14.4 t with 285/70R19.5 tires - Internal dimensions: 5,000 x 2,420 x 500 mm - Loaded floor height: 1,040 mm - 1 chassis with underrun protection, hot-dip galvanized version - Paint finish: axles with springs as well as air tanks etc. in black tone - 3 pairs of recessed and foldable lashing hooks in the steel floor, LC 3,000 daN - ABS 2S/2M, 24 Volt - 2 spring-assistors for 500 mm high steel sideboards Dksdpfx Abswcy Nkj Nsu - 1 central locking system left and right, swinging when side walls are not split Additional Equipment: 1 pair of UVV lashing rings recessed in steel floor instead of on the steel floor 1 Hardox 450 steel floor, 4 mm thick Height-adjustable drawbar via bevel gear with crank operation instead of standard 1 pair of aluminium ramps without curb (8.0 t/pair), 3,570 x 400 x 105 mm Suitable for rubber-tired and tracked vehicles Toolbox

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, Leto izdelave: 2010, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm, German trailer, second owner Technical Data Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading. Dimensions: - Gross weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread Features: - ABS/EBS connection according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer rails for container guidance, hot-dip galvanized Dodpfx Asvg T Nyjb Noku - Container locking: The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails. - 2x 9t BPW 420 mm drum brake axles with air suspension - Air suspension with lowering function - Frame: welded steel construction - Brake system: two-line EBS-compliant (EU standard) - DUOMATIC coupling head - Spring-loaded parking brake - Electrics: 24 volts - Multi-chamber rear lights - 15-pin plug with connecting cable - Lighting according to EU regulations - Rims: factory silver - Underrun protection: aluminum profiles - Wheel chocks with holders - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Condition commensurate with age and mileage! Delivery available at extra cost All information subject to change! Sale to businesses or for export only! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2001, vzmetenje: jeklo, Leto izdelave: 2001, Dodatne informacije: Djdpfouwvbqsx Ab Njku Znamka: MÜLLER MITTELTAL Model: T 3 Zgradba: platforma (platforma D=8.400 / Š=2.510 / V=940 mm) Leto: 09.2001 Vzmetenje: jekleno Zavore: bobnaste Dimenzije: D/Š: 10.000 mm / 2.510 mm Mase: skupna/prazna: 24.000 kg / 6.100 kg = Več informacij = Vzmetenje: listnato vzmetenje Lastna teža: 6.100 kg Nosilnost: 17.900 kg Dovoljena skupna masa: 24.000 kg Dimenzije (DxŠ): 1.000 x 251 cm Za več informacij se obrnite na: Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche ali Deniss Urmaker.

Stanje: novo, skupna masa: 21.000 kg, največja dovoljena obremenitev: 16.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem – Low-loader / Platform Trailer, drive-over version Ref. for enquiries – 11520, available immediately! NEW VEHICLE incl. COC Dkjdpfx Aewkb Iwsb Neu * GVW: 21t, Payload: 16.60t, hot-dip galvanized chassis * Platform version with 400 mm front wall, ramp securing by ramp holding rod and diagonal bracing * 21 t GVW version: reinforced frame and axles, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading area with 400 mm high front wall * Ramps extended: 3,000 mm, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lifters with vertically mounted, adjustable springs for easy one-person operation * Load securing package: 4 UVV drop-forged lashing brackets (LC 8,000 daN) mounted to existing hole pattern on 45° outer frame (protruding approx. 5 mm). Arrangement: approx. 1,000 mm from front/rear cross member. * 10 UVV retractable lashing brackets LC 3,000 daN in the outer frame’s hole grid * Softwood flooring, 50 mm. 2 UVV recessed lashing rings front + rear in the cross member, LC 10,000 daN each * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in front and rear cross members * Prepared for retrofitting container locks * Air suspension, Gigant axles incl. EBS 2S/2M * Raise and lower function * 235/75R 17.5 (8x) twin tyres with tyre pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, right in the direction of travel * LED lighting system * 7-pin socket at the rear, wired for oversize lighting incl. rear light (58R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Warning sign for oversize loads * 1 removable LED beacon incl. bracket and installation * Folding supports at rear, landing leg at front with gearing crank ---- Lease-purchase example from our partner MMV Leasing: €635/month net, 60 months term, no down payment, €0 residual value Other terms possible with/without down payment or residual value! We are a MüllerMitteltal authorised dealer ---- Our opening hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside of business hours by appointment * Wir sprechen Deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * Leasing, financing, trade-in possible

Stanje: novo, skupna masa: 9.600 kg, največja dovoljena obremenitev: 6.900 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 4.030 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2025, * EBS (electronic braking system) * Emergency release device for spring brake cylinder * Drum brake * SAF axle * Parabolic springs * Drawbar designed as a central axle with 40 mm bolt eye * Continuously adjustable drawbar height using spindle lifting element instead of fixed drawbar * Standard coupling height approx. 900 mm (+/- 150 mm) * Tire pressure monitoring system with display option in truck via EBS signal (no truck-side installation required) * Front landing gear * Enclosed plastic mudguards * Folding underrun protection for pavers * 15-pin electrical connector * LED rear lights * Flashing side marker lights * Chassis made of fine-grained steel Dedpfx Absw Ndr Ue Nsku * Pallet three-way tipper body * 700 mm steel front wall * Asymmetrical continuous aluminium side walls, folding without central stanchion, with extended travel locks and pendulum function via manual central locking * 800 mm high steel tailgate with automatic tailgate opening when tipping rearwards * 4 mm Hardox 450 steel floor * Two pairs per side of 3 t (ton) lashing rings, recessed and foldable in steel floor * Chassis, drawbar, underrun protection hot-dip galvanised * Tipper body paintwork available in any desired RAL colour (excluding metallic & special colours) up to 6 weeks prior to delivery * New vehicle with manufacturer's warranty * Errors and interim sales excepted * Available from calendar week 51/2025 * Sample images; actual vehicle may differ from the pictures

Stanje: rabljeno, skupna masa: 13.500 kg, največja dovoljena obremenitev: 10.100 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 1.000 mm, prva registracija: 03/2001, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Skupna teža: 13.500 kg Lastna teža: 3.400 kg Nosilnost: 10.100 kg Skupna dolžina: 8.100 mm Nakladalna dolžina: 6.000 mm Širina: skupna širina 2.550 mm / širina kesona 2.460 mm Višina nakladanja: ca. 1.000 mm Dodatne informacije - Pnevmatske gume: 285/70R19,5 - Stranske stene 400 mm, 1x deljene Djdpfx Abjw Nu I Ts Nsku

Stanje: rabljeno, skupna masa: 6.500 kg, največja dovoljena obremenitev: 4.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, Leto izdelave: 1979, skupna širina: 2.500 mm, skupna višina: 3.000 mm,

Stanje: rabljeno, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.790 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, prva registracija: 04/2000, vzmetenje: jeklo, Leto izdelave: 2000, Dodatne informacije: Znamka: MÜLLER MITTELTAL Model: TS4 Zgradba: nizkopodna prikolica (platforma D=10.790 mm / Š=2.500 mm / V=950 mm) Letnik: 2000 Vzmetenje: jekleno Zavore: bobnaste Dkedpfxeuwu Ezo Ab Nsu Dimenzije: D/Š: 14.790 mm / 2.500 mm Teže: največja / prazna: 57.000 kg / 11.800 kg HIDRAVLIČNE RAMPE / JEKLENO VZMETENJE / BOBNASTE ZAVORE = Več informacij = Vzmetenje: listnato vzmetenje Lastna masa: 11.800 kg Nosilnost: 45.200 kg Dovoljena skupna masa: 57.000 kg Dimenzije (D x Š): 1.479 x 250 cm Za več informacij se obrnite na Andrei Somov, Mark Ševtšenko ali Deniss Urmaker.

Stanje: novo, skupna masa: 8.800 kg, največja dovoljena obremenitev: 6.000 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * Müller Mitteltal KWH 8.8 ML Cable Transport Trailer * NEW VEHICLE without initial registration * Available immediately, * Reference number for inquiries: 11555 * TPMS tire pressure monitoring * EBS braking system, drum brakes, BPW axle, parabolic springs * Support winch at the front, spring-assisted square support legs at the rear with base plate and safety locking pins for various support heights * Drawbar with 40 mm towing eye (height-adjustable) * 15-pin electrical connector * LED lighting * 315/80 R 22.5 tires, closed steel mudguards * Swiveling cable drum frame * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of polyamide centering cones, stepped design * For drum diameter 800–3,000 mm x (1,700 mm width between drum arms) * With locking device for drum securing at arm ends as well as locking of drum frame to chassis with a centrally positioned claw lock * Motor-hydraulically powered pull and push cylinders with pipe rupture protection. Control valve with automatic neutral position, pressure relief valve, and lowering throttle. Hydraulic connectors, hoses, and pipes in NW 13. * Hydraulic drum drive with oil motor, valves, and rubberized drive rollers (adjustable). Hydraulic speed controller and brake for drum drive. * Additionally, hydraulic pump unit with petrol engine and manual starter, 13 HP with gear pump (150 bar), pressure supply either by connecting to truck hydraulics or pump unit * Alternatively, diesel engine with 6.5 HP, 150 bar, instead of petrol engine * 2 LED work lights mounted on the sides of the trailer (suitable for 12 V and 24 V), can be switched from the truck (truck-side installation required, connected to PIN 11) * Tool box approx. 500 x 350 x 400 mm * Chassis and drawbar hot-dip galvanized * Advertising space integrated in side protection, exterior finished in RAL 9016 traffic white (polyester coated) ---- * Financing available through our partners with or without down payment or final installment, and different terms possible. Request an offer from us! * We are an authorized Müller Mitteltal dealer! * Example installment purchase from our partner FM LeasingPartner: e.g., €865 per month net, no down payment, and "0" euro remaining value at 48-month term. * Request an offer from us! ---- * Our opening hours Dsdpfx Asw R H Syob Njku * Monday–Thursday: 08:00–17:00 * Friday: 08:00–15:00 * Outside business hours, we are available by appointment * wir sprechen deutsch, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais ----

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 24.020 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at rear * Side underrun protection * Swing-down supports at rear of chassis frame * Mechanically adjustable warning sign sets front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Contour marking tape, reflective on sides and rear * Toolbox made of galvanized sheet steel (black powder-coated), approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Rotating beacon (removable) at rear Dedsl Th I Ajpfx Ab Njku * Drawbar with 50 mm towing eye and height adjustment via traction spring & turnbuckle * 15-pin electrical connector * Four stake pockets on each side (stakes not included), doubling as lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 6 pairs of UVV-certified lashing rings, pivoting and retractable, loadable in all directions and recessed into the outer frame – in the corners rated at 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m overall width (not in the rear taper) * Widening planks stored in the center of the load area * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control valve block for retrofitting hydraulic lateral ramp shift * Load area over fifth wheel: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. coated in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 44 / 2025

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.870 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 t Gigant axle system * Parabolic springs with compensation unit * Drawbar height-adjustable by approx. 300 mm * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector Dsdel Thy Rjpfx Ab Neku * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * 50 mm softwood floor * Provisions for retrofitting 20" container locks at the front and rear * Bolted, smooth sheet metal front wall * Sidewalls made of profiled steel sheeting, foldable, with drop-side lifting springs * Bolted, hot-dip galvanized rear stakes * Perforated outer frame approx. 45 degrees edged, with 2 t lashing capacity every 480 mm * Preparation for 3 t folding lashing rings every 600 mm (five lashing rings installed on each side) * One 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossmember for 1.2 t lashing points * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear-access storage compartment integrated under the loading bed in the chassis * Sideboard color RAL 9010 pure white * Painting of the side panels in a RAL color of your choice available at extra cost * New vehicle, not registered * Errors and prior sale excepted * Available from week 48 / 2025