Müller-Mitteltal Ka Prikolice nakup rabljenega (240)

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.650 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline * Wabco EBS (Electronic Braking System) * RDÜ Tire Pressure Monitoring System * Multivoltage * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer unit * Approximately 300 mm height-adjustable drawbar with 40 mm flange towing eye * Mechanical landing gear front * Rear with 2 mechanical folding supports * Plastic toolbox, right side * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * Two-step entrance, front left in direction of travel * LED rear lights * Bolted underride protection * Plastic quarter mudguards * Net hooks on the sides and rear in the central locking mounts as well as 2 pieces on the front wall * Steel palletized three-way tipper body (continuous side walls—no center posts—foldable with sideboard spring lifters, tailgate foldable as well as swinging via manual central locking) * Each corner with 1 x 5 t lashing point, plus 4 x 3 t lashing rings integrated into the outer frame on each side * 4 mm steel floor plate * Rear ramp attachment rail * Body reinforced with load securing certificate according to EN 12642 XL * 1 pair aluminium loading ramps approx. 3,310 x 400 mm (capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, integrated below the loading area in the chassis Crjdpfxol Thw Ij Ad Ush * Chassis, drawbar, tipper body, front wall, sideboards, folding supports, and rear stanchions hot-dip galvanized; axles, springs, air tanks, flange towing eye, and landing gear painted in black * Tyres: 385/55 R 19.5 * New vehicle with manufacturer's warranty * Sideboards hot-dip galvanized * Subject to errors and prior sale * Available from week 46/2025

Stanje: rabljeno, skupna masa: 12.600 kg, lastna masa: 3.110 kg, največja dovoljena obremenitev: 9.490 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.550 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 600 mm, prva registracija: 05/2016, naslednji pregled (TÜV): 02/2025, vzmetenje: jeklo, velikost pnevmatike: 285/70R19.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, turntable trailer, leaf suspension, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps. Body: 2-axle 3-way tipper trailer, Gigant axles, drum brakes, hot-dip galvanized frame! Codpfx Adjwth Iis Usrh Loading height approx. 1290 mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors excepted!

Stanje: rabljeno, skupna masa: 11.000 kg, največja dovoljena obremenitev: 8.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, prva registracija: 10/2000, skupna širina: 2.550 mm, Gross weight: 11,000 kg Unladen weight: 3,000 kg Payload: 8,000 kg Overall length: 7,450 mm Loading length: total 5,600 mm, including rear sloping section 1,000 mm Width: overall width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information - Sideboard height: 400 mm, split, foldable - Split spring-assisted ramps, dimensions approx. L: 3,380 mm W: 600 mm - Ramps covered with phenolic resin-coated plywood - Large lashing package Credpfxowz Drgj Ad Ujh - BPW axles - Tyres 235/75 R17.5 - LED reversing lights - Plastic toolbox

Stanje: novo, skupna masa: 21.000 kg, največja dovoljena obremenitev: 16.600 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-bed / Platform Trailer, drive-over Ref. No. for enquiries: 11520 NEW VEHICLE incl. COC * GVW: 21t, Payload: 16.60t, galvanised chassis * Immediately available * Platform variant with 400mm high front wall, ramp safety system with ramp holding rods and angled support * Version GVW 21t: reinforced frame and axle, axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000mm loading platform with 400mm high front wall * Extended ramps: 3,000 mm, single-piece, hot-dip galvanised ramp with hot-dip galvanised grating * Ramp assist system with vertically mounted, adjustable springs for easy single-person operation * La-Si package: 4 UVV certified lashing brackets (LC 8,000 daN) installed in the existing hole pattern in the 45° outer frame (approx. 5mm offset), positioned approx. 1,000 mm from the front and rear crossmember respectively * 10 UVV certified lashing brackets LC 3,000 daN retractable in the existing outer frame hole pattern * Softwood floor, 50mm thick. 2 UVV certified lashing rings recessed at the front and rear crossmember with LC 10,000 daN * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and rear crossmembers * Preparation for retrofitting container locks * Gigant axles with air suspension incl. EBS 2S/2M * Raise and lower function * 235/75R 17.5 (8-fold) twin tyres with tyre pressure monitoring sensors * 1 plastic toolbox mounted in front of the front wall, right-hand side in driving direction * LED lighting system * 7-pin socket at rear, wired for overlength lighting with taillight (58 R) and ground * 2 LED reversing lights at rear * Flashing side marker lights * Oversize warning board * 1 detachable all-round LED beacon incl. holder and installation * Foldable supports at rear, support leg at front with geared winch ---- Leasing example from our partner MMV Leasing: €639 net/month for 60 months with no down payment and “0” euro residual value Other terms available with/without down payment/residual value! We are MüllerMitteltal authorized dealers ---- * Our opening hours Credpfx Aswllrisd Ueh * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside office hours by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, and trade-in available

Stanje: rabljeno, konfiguracija osi: 3 osi, skupna masa: 24.000 kg, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, prva registracija: 08/2008, vzmetenje: zrak, številka stroja/vozila: GE11/142/2022, Very well-maintained vehicle from first ownership Three-axle low-loader trailer with drive-over ramps Low-loader with loading ramp Heavy-duty transport Type T3 Komakt 30.0 Codpsn Aw Hkofx Ad Usrh Length: 8,500 mm Width: 2,500 mm Air suspension Commercial/Export net price – €19,990 Subject to changes, prior sale, and errors. ===== Telephone 2 Mobile =====

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension * Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * Jost landing gear at the front * LED rear lights * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right on the outside of the front wall * Side underride protection * Plastic quarter mudguards * Hot-dip galvanized chassis, as well as drawbar, front wall, rear wall, tailgate, and loading ramps * 50 mm softwood floor * Fixture in front of the front wall for retrofitting container locks Credspk Dv Repfx Ad Uoh * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding, with board spring lifter * Steel rear wall, can be slid in between the ramps—storage bracket for rear wall in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm, option to fit 3 t recessed lashing rings every 600 mm; in each front and rear corner one 6.3 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) * Approach angle at rear approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Side panel color RAL 9010 pure white * Painting of the side walls in a RAL color shade available at an extra charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: rabljeno, skupna masa: 13.400 kg, lastna masa: 3.700 kg, največja dovoljena obremenitev: 9.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.410 mm, višina nakladalnega prostora: 500 mm, prva registracija: 10/1998, naslednji pregled (TÜV): 09/2024, vzmetenje: jeklo, velikost pnevmatike: 205/65R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Location: Bovenden, steel body, 2 axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, underrun protection, hydraulic ramps, front support legs, twin tyres, swing doors. Crjdewqn Nnopfx Ad Ush Body: Tandem three-way tipper trailer with attachable hydraulic loading ramps, 2x BPW axles, drum brakes! Spare wheel not included in the price! NO GUARANTEE ON ACCESSORIES INFORMATION. Changes, prior sale, and errors excepted!

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.950 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, * ETÜ-TA-ER 14.4 Flatbed: * TPMS (Tire Pressure Monitoring System) * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 ton BPW axles * Air suspension with lifting and lowering function * Mechanically adjustable 3 m warning sign boards at front and rear * Drawbar height-adjustable by 300 mm with 40 mm flange towing eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B-dimension approx. 8,080 mm) * Landing gear crank at front * External folding support legs at rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, mounted left and right side * Side underrun protection * Rear underrun protection * Plastic quarter mudguards Crsdpfx Aom Tgxwod Ujh * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at rear (activated via reverse gear) * 1 removable LED beacon (including bracket) at rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container external width) and lockable * Locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN conform) with an absolute external width of 3,000 mm * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm, installation of 3 t drop lashing rings every 600 mm possible – each side equipped with 5 x 3 t UVV lashing rings, in the front and rear corners each 1 x 6.3 t lashing ring (front directly behind container locks in timber floor, rear in end crossmember), various 1.2 t lashing point options in front wall and end crossmember * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t / pair) suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed below loading bed in chassis * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air reservoirs, landing crank at front and flange towing eye painted black * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex works Egestorf at the A7

Stanje: novo, skupna masa: 40.000 kg, največja dovoljena obremenitev: 31.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each Cedpfx Asl Tlhrod Usrh * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2024, * PT 30 Profile: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering function as well as RtR valve * Smart-Board mounted on trailer as information tool (separate axle load indication front and rear) * Tyre pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanised steel sheet skirts with spray protection Crsdpfotplwijx Ad Ush * Contour marking tape, reflective on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment by means of draw spring & turnbuckle * Tool box, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Accessory box in turntable with folding lid, 2 built-in container locks (immediately behind turntable platform) * ROBOT-welded anti-slip coating on turntable platform steel plate (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on front wall support, front & rear 1 pair UVV lashing rings (13.4 t) as well as 3 pairs each side UVV lashing rings (10 t), swivelling and lowerable, loadable in all directions and recessed in outer frame, each side 3 stanchion pockets with simultaneous 2 t lashing capacity * 6 pairs mechanical folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stored in the centre of the load area * Hydraulic one-piece ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shifting * Chassis, turntable, folding outriggers, drop supports and approach ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted in a shade of black * Loading edge height (laden): approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 16.400 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer with pressure sensors for display of total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel panels, each with spray protection * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm (black powder-coated) mounted on right side * 15-pin power connector * LED lighting 12/24 V * LED revolving beacon (removable), rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (no installation required on the truck) * Rubber covering on the folding ramps as well as on the inclined ramp surface, left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from front to rear cross beam * Hardwood flooring on the walking surfaces of the low bed platform * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package comprising 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions, recessed into the outer frame – in corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear incline) * Plank holder under the cargo area, lengthwise * Roller stop in front of the front cross member, raised, with one 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic side ramp displacement * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof Codpeq Dyvcefx Ad Ujrh * Dual-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm ramped section) * Loaded platform height: approx. 890 mm +/- 20 mm with air suspension * Chassis, turntable, roller stop, folding extensions & ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with equalization unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * Landing gear at the front * Rear external folding supports * 15-pin electrical connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Pre-installed equipment before the bulkhead for subsequent installation of container locks * Bolted 400 mm smooth metal bulkhead * Bolted rear stanchions * Drop sides with spring assist * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing rings every 600 mm possible; 1 x 6.3 t lashing point each in the front and rear corners; various 1.2 t lashing options in the front and rear cross members * One-piece hydraulic mesh ramps approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on truck exceeding 40 ltr./min. up to max. 140 ltr./min.) * Chassis, drawbar, bulkhead, mechanical folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, landing gear, and flange towing eye painted in black * Side walls painted in RAL 9010 pure white * Side wall painting in any RAL color available at extra cost Crjdpfx Aorwc R Red Ujh * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 15/2025 * Sample images

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit Csdpfxotr St Hs Ad Usrh * Tire pressure monitoring with indication in the truck via EBS signal; no truck-side installation required * 300 mm height-adjustable drawbar with 40 mm flange towing eye * Mechanical landing leg at the front * Rear: 2 mechanical folding support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks on the sides and rear in the mounts for central locking, as well as 2 pcs. on the front wall * Main frame made of fine-grain steel * Steel pallet two-way tipper body: Fixed front wall made of plain sheet, continuous side walls – folding without center stakes with drop-side assist and pendulum function via manual central locking * Rear stakes are bolted * Steel rear wall inserted in front of the ramps * Lashing points: 1 x 5 t in each corner; 4 x 3 t recessed lashing rings per side in the outer frame * 4 mm floor plate made of fine-grain steel * Two-part mechanical grating ramps with aluminum tip: 2,150 + 1,300 mm x 600 mm (can be manually telescoped up to 80 mm overlap) * Chassis, drawbar, rear stakes, underrun protection, mechanical support legs, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing leg painted in black * Side walls and platform in RAL 9010 pure white * Painting of the side walls and tipping platform in a different RAL color available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf on the A7

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 12.080 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.900 mm, širina tovornega prostora: 1.920 mm, višina nakladalnega prostora: 415 mm, Leto izdelave: 2022, Oprema: ABS, dvižna zadnja plošča, * ETM-TA 14.4: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 t Gigant axles * Parabolic springs with tandem compensating aggregate * Height-adjustable drawbar (+/- 150 mm) with 40 mm screw coupling eye * Jost landing gear at the front, side underrun protection * Foldable A-panel at the rear * 15-pin electrical connector, multi-chamber tail lights * Fixed steel front and side panels * Removable steel rear panel * Floor made of 50 mm softwood * 1 sliding sheet wear plate 750 x 1,000 mm at the front area including 2 removable trough stops at the front, mountable in 2 positions each * 4 removable trough stops, mountable in 2 positions to laterally center the troughs * On each side, 1 x (13.5 t) UVV lashing point for securing tensioning elements * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortening device (tensioning force 6,300 kg) * Rear cross member for attaching aluminum loading ramps including 2 additional support legs at the rear * Loading edge unloaded approx. 710 mm * Chassis, front wall, side walls, mudguards, drawbar, and rear support legs hot-dip galvanized * Axles, springs, landing gear, and air tank painted black * Tyres: 285/70R19.5, wheelbase: 1,140 mm * Loading edge unloaded: approx. 710 mm, sold without container * Color: hot-dip galvanized * Vehicle has a one-day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used Cjdjq Euaropfx Ad Usrh * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available ex Egestorf on the A7

Stanje: novo, skupna masa: 24.000 kg, največja dovoljena obremenitev: 18.900 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * TPMS (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Liftable central axle * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel carrier in basket design, right-hand side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for container guiding rails * Steel floor with roller recesses in the bogie area * For roll-off container transport, container lengths of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front tracks * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum of 10 m³ volume possible * Including 8 repositionable container supports for lateral centering of skips, front 4 with tilting stops * 3 pairs of 10 t UVV lashing rings on the side for attachment of tensioning elements for positive and non-positive load securing * 4 shamrock-shaped lashing rails on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld bead as anti-slip coating in the running rail area of the approach slope * Mechanical drop-down supports at the rear * 1 pair of aluminum loading ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable rear storage compartment) * Tires: 235/75 R17.5 Cedpfx Aopk D Awsd Ujrh * Loaded ride height approx. 1003 mm * Payload 18,900 kg * Technically permissible gross weight 27,000 kg * Axles, slewing ring, drawbar and air tanks painted black * New vehicle, unregistered, with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 23/2025

Stanje: novo, skupna masa: 19.000 kg, največja dovoljena obremenitev: 14.550 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) Crsdpfxepk D D Hs Ad Ujh * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm mounted laterally right (black powder-coated) * Side underrun protection * Plastic quarter-mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis – load height +20 mm * 50 mm softwood floor, clamped design * Preparation for subsequent fitting of container locks in front of the bulkhead * Bolt-on front wall made of smooth steel sheet * Trapezoidal-profiled side walls made of steel sheet, foldable with drop-side spring assists * Steel rear wall, retractable between the ramps – storage bracket inside front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring, front and end beams with multiple holes for 1.2 t lashing points * One-piece mechanical grated ramps with spring system for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Drop-side panels painted RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available immediately from Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.950 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2024, * ETÜ-TA-ER 14.4 flatbed: * TPMS (Tire Pressure Monitoring System) * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t BPW axles * Air suspension with lift and lowering system * Mechanically adjustable 3 m warning panel sets front and rear * Drawbar height-adjustable by 300 mm with 40 mm flange draw-eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic tool boxes approx. 750 x 350 x 300 mm on each side left & right * Side underrun protection * Rear underrun guard * Plastic quarter mudguards * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon, incl. holder, at the rear * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m outer container width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) with an absolute external width of 3,000 mm * Perforated outer frame approx. 45 degrees angled with 2 t lashing capacity every 480 mm; installation of 3 t recessed lashing rings possible every 600 mm; fitted with 5 x 3 t UVV-compliant lashing rings per side; at each of the four corners, 1 x 6.3 t lashing point (front directly behind the container locks in the wood floor, rear in the end crossmember); various 1.2 t lashing options via bores in the front and rear crossmembers * 1 pair of approx. 3,570 x 410 mm aluminum slide-in ramps (load capacity 10 t / pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed below the loading platform in the chassis * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange draw-eye painted in black * New vehicle with manufacturer's warranty Crjdsv D Tbkspfx Ad Uoh * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.750 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring system * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensator unit * Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front landing gear (support winch) * External foldable rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, mounted at the front right on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring Cjdpfxov Eq Evs Ad Uorh * In front of the front wall and rear slope, preparation for retrofitting container locks for transporting 20" containers * Bolted smooth sheet metal front wall * Drop-down steel side walls – trapezoidal profile – split once in the middle * Insertable steel rear wall; can be stored inside in the ramp holder at the front wall when not in use * Bolted rear corner posts * Perforated outer frame, kinked at approx. 45 degrees, 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm; each front and rear corner with 1 x 6.3 t lashing point; various boreholes in the front and end crossmembers for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Rear entry slope approx. 860 mm chassis * Drawbar, front wall, tailgate, foldable supports and loading ramps hot-dip galvanized * --- Axles, springs, air tanks, flange drawbar eye as well as landing gear painted in a black tone --- * Reinforced and certified body according to EN 12642 XL incl. load securing certificate -- * Wheelbase 1,140 mm * Side wall painting in RAL 9010 pure white * Painting of side walls in a different RAL color available at extra cost * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.870 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: * Loading area: 6.27 m * Suitable for container transport * TPMS (Tire Pressure Monitoring System) * EBS braking system * Emergency release device for spring-actuated cylinders * Drum brakes, 2 x 5.5 t BPW axles * Parabolic springs with compensating unit * Drawbar height-adjustable by 300 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding support legs at the rear * Plastic quarter mudguards * LED lighting * Hot-dip galvanized chassis, drawbar, front wall, rear wall, rear stanchions, and loading ramps Cjdpfsq Ra D Eox Ad Ujrh * 50mm softwood floor * Bracket in front of the front wall for retrofitting container locks * Bolted smooth sheet front wall * Trapezoidal-profile drop-side steel side panels with sideboard spring assister * Steel rear wall can be slotted between the ramp holders when not in use and stored in front of the front wall internally * Bolted rear stanchions * Perforated external frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the front and end crossmembers for 1.2 t lashing options * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm spacing) * Rear drive-up slope approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted RAL 9010 pure white * Side panels can be painted in any RAL color for an extra charge * Plastic toolbox * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, skupna masa: 30.000 kg, največja dovoljena obremenitev: 23.700 kg, konfiguracija osi: 3 osi, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge for determining load weight (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, both with splash protection * Reflective contour marking tape on the sides and rear * Foldable toolbox lid (hot-dip galvanized) on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 2 x 7-pin electrical connectors * 4 stake pockets per side, each offering 2 t lashing capacity * Load securing package including: 2 lashing eyelets (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant adjustable and folding lashing rings, loadable in all directions and recessed into the outer frame – corner capacity 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (except rear angle) * Broadening planks stored in the middle of the loading platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm Crsdjl Tpwyopfx Ad Ush * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, folding widenings & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, skupna masa: 14.400 kg, največja dovoljena obremenitev: 10.360 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tyre pressure monitoring system with display capability in the truck via EBS signal, no installation required on the truck side) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t Gigant axles Crodpjpk D Dqjfx Ad Ush * Air suspension with lifting and lowering function * Drawbar height-adjustable by approx. 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted on the front wall * Side underrun protection * Plastic quarter mudguards * LED lighting system * 15-pin power plug * Hot-dip galvanized chassis, drawbar, front and rear wall * 50 mm softwood floor * Prepared for retrofitting 20" container locks at the front and rear * Bolted front wall made of flat sheet steel * Drop-down steel sheet side walls – trapezoidal profile – with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; one 6.3 t lashing ring in each corner, front and rear; various anchoring holes (1.2 t) in the front and end crossmembers * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles, stored at the rear in a compartment recessed in the chassis under the loading area * Vehicle fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available immediately ex Egestorf

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.660 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalization unit * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Pre-fitted for retrofitting container locks in front of the headboard * Bolted headboard made of smooth sheet metal * Trapezoidal profile steel side panels, foldable with sideboard spring lifter * Steel rear wall, insertable between the ramps; storage bracket inside the headboard when not in use * Bolted rear stanchions * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the headboard and rear cross-member for 1.2 t lashing options * One-piece mechanical grating entry ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear entry slope approx. 860 mm * Chassis, drawbar, headboard, rear wall, entry ramps and folding supports hot-dip galvanized * Sideboard painted in RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * Axles, springs, air tanks, drawbar eye, and landing gear painted black Crodpfx Adsl Th Hws Ueh * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex works Egestorf

Stanje: novo, skupna masa: 11.900 kg, največja dovoljena obremenitev: 8.800 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: * Load area 5.37 m * TPMS (Tire Pressure Monitoring System) * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Drawbar adjustable in height by approx. 300 mm * Jost landing gear at the front * Rear folding external supports * Plastic toolbox front right, mounted externally on the front wall * Side underrun protection * LED lighting * Plastic quarter-mudguards * 50 mm softwood floor Csdjl Th Nrspfx Ad Ujrh * Bolted front wall made of smooth sheet metal * Trapezoidal steel side walls, foldable, with tailboard spring assist * Sliding steel rear wall, stowable in front of the front wall between the ramp mounts when not in use * Rear stanchions bolted on * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Tapered rear frame, approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted in RAL2011 deep orange * Side wall painting in other RAL colors available for an extra charge * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.650 kg, konfiguracija osi: 2 osi, Leto izdelave: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring-loaded cylinders * Disc brakes * Duomatic brake coupling * 2 x 10-ton SAF axles * Air suspension with automatic lowering when uncoupling the brakes * Drawbar 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & spindle * Plastic tool box on right side, enclosed plastic mudguards * Enclosed side underrun protection suitable as advertising space * Rear underrun protection with 2 impact buffers Cedpfsl Tqkwsx Ad Uorh * Foldable "A" sign at the rear for waste disposal * LED tail lights with protective cover * 2 x 7-pin electrical connectors * Chassis hot-dip galvanized (excluding air tanks, axles, drawbar, etc.) * Roller track length approx. 6,950 mm * Locking of the roll-on container using pneumatic 4-point claw system * Front: 2 insertable container stops with 2 additional locking positions * Unladen ride height approx. 1,165 mm * --Permissible gross weight technically possible: 20,000 kg-- * Suitable for container lengths of 5,000 to 7,000 mm * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Stanje: novo, skupna masa: 18.000 kg, največja dovoljena obremenitev: 14.680 kg, konfiguracija osi: 2 osi, Leto izdelave: 2025, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release system for spring brake cylinders * Disc brakes Csdpfxsv Nulzj Ad Uorh * 2 x 11 t Sauer axles * Air suspension (automatically lowers when decoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Plastic toolbox 450 x 470 mm, mounted right side * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front & rear * Enclosed side underrun protection usable as advertising panel * Rear underrun guard * Rear plastic impact protection buffers * Dangerous goods sign at the rear * 15-pin power connector * LED tail lights * Roller track length approx. 6,830 mm * Pneumatic 4-point clamp lock * Mechanically adjustable stop brackets (2 positions) front left and right on running rails * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * --Permissible gross weight technically possible: 20,000 kg-- * Approx. 1,130 mm ride height loaded * Suitable for 5,500 - 7,000 mm container lengths * Hot-dip galvanized chassis * Air tanks, axles, slewing ring, and drawbar * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf