Drugo Delovna Platforma nakup rabljenega (98)

Stanje: rabljeno, največja dovoljena obremenitev: 4.930 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 1.990 mm, skupna širina: 2.545 mm, skupna višina: 2.850 mm, Errors and prior sale excepted! Internal number: 1457. 1083677 --- Please refer to the photos for equipment and condition. --- The vehicle is in unprepared (as-is) condition! Nationwide delivery available at additional cost. Errors and prior sale excepted. We are happy to accept your vehicle as a trade-in. Financing / leasing available with no down payment required! Do you have any further questions? We are happy to advise you! Godpjwtvvnjfx Affstt

Stanje: novo, največja dovoljena obremenitev: 38.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T5 profile 50.0: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle steering (axle lock for manoeuvring can be activated from the cab without additional truck-side installation, and additionally via a switch on the trailer); the lock must be disengaged before driving on public roads * Air suspension, lift and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm with lifted axle) * Forced relief and forced lowering of the lift axle for manoeuvring (requires truck-side installation), speed-dependent activation via EBS * Smartboard infotool with pressure sensors for total axle load display per axle group * TPMS with display option in the truck via EBS signal (no truck-side installation required) * Mechanical warning sign kit for 3m total width * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment * LED lighting system 12/24 V * Removable rear LED beacon * Toolbox, galvanised steel approx. 650 x 300 x 600 mm, mounted left side * Plastic fenders front axle, galvanised steel mud guards rear axle * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to rear) * Shortened low-loader deck by 500 mm to 6,280 mm incl. extended step by 500 mm to the front * Load securing package: 2 x 6.4 t lashing rings front corners, side front & rear corners each 2 x 13.4 t UVV lashing rings, 5 x 10 t UVV lashing rings per side (pivoting/lowering and loadable in all directions), 4 stake pockets per side additionally providing 2 t lashing option, 1 x 16 t UVV lashing ring on rear traverse * Rubber matting on folding ramp, approach slope, and low loader running surface * Bamboo wood inserted between main beams in excavator arm storage area * Extendable and folding outrigger extensions for 3 m total width (beam holder under chassis, right side) * Continuous excavator arm storage with reinforcement profile from last axle to rear cross member approx. L=2,350 x W=770 x H=270 mm, 2 pairs 6.4 t UVV lashing rings on sides * Hydraulic folding ramp with dual-line hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic capacity over 40 l/min up to 140 l/min) * Loaded platform height 890 mm +/- 20 mm (via air suspension) * Platform above turntable: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm incl. 860 mm approach ramp * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanised * Drawbar, axles, hydraulic axle supports, and air tanks painted black Gedoxptn Dopfx Affstt * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 14/2026

Stanje: rabljeno, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2022, dolžina tovornega prostora: 6.770 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 600 mm, prostornina tovornega prostora: 10 m³, Oprema: ABS, ? pocinkano podvozje ? nizko sklopljen ? vlečno oko 50 mm ? zaklep za kontejner ? po 12 pritrdilnih obročev na vsaki strani ? vzvratna kamera ? bobnaste zavore ? duomatski priključek Gsdsxb Ig Sopfx Affott ? ABS ? zračno vzmetenje ? orodjarna ? EBS ? podporne noge ? dvojna kolesa ? BPW osi Vse informacije brez garancije / Vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 7.500 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 06/2020, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 900 mm, skupna širina: 2.550 mm, Overall length: 9,150 mm Loading length: approx. 7,300 mm Width: total width 2,550 mm / loading width approx. 2,480 mm Loading height: approx. 900 mm Further information: - Internal loading height: 2,700 mm - Fine-grained steel welded construction - Slightly angled outer frame with "Load-Lock profile" for lashing strap attachment - 2-speed landing gear at the front - Foldable rear support - Steel underride protection - Quarter shell mudguards - Rear impact guard - Drawbar height-adjustable via spindle - GFA axles with tapered roller bearings and S-cam brakes - Air suspension - 2-line compressed air braking system / lifting-lowering valve - Anti-slip plywood flooring, approx. 30 mm thick, designed for high point loads - 2,580 mm high, steel corner stanchions for high-volume design, release mechanism for side curtain at front bulkhead - 1 pair of adjustable sliding stanchions along the entire length, with 4 insert pockets each and long pocket at the bottom - Rear corner stanchions steel up to underside of roof, curtain attachment with round tube and tensioning ratchet Gtsdpoxqvyfefx Affjt - Rear portal doors, double-wing with 2 internal locking rods each - Curtain with welded-in horizontal and vertical belts, tension locks made of stainless steel - Solid roof with curtain and bows Curtain can be provided with advertising stickers and/or lettering. New curtain available upon request.

Stanje: novo, največja dovoljena obremenitev: 2.110 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 1.550 mm, višina nakladalnega prostora: 200 mm, B27300/150 MACHINE TRANSPORTER TECHNICAL DATA * Trailer type: B27300/150 * Gross vehicle weight: 2,700 kg * Payload: 2,075 kg * Internal dimensions: L: 305 cm, W: 155 cm, H: 20 cm * Loading height: approx. 54 cm * Floor: multiplex wooden floor * Integrated lashing points recessed in the loading floor * Side walls: steel * Frame: welded steel, hot-dip galvanized by immersion * Electrics: 13-pin, 12V * Tyres: 185R14C * Axle manufacturer: AL-KO or KNOTT * Number of axles: 2 * Braked axles * Standard jockey wheel * Walkable steel mudguards * Shovel holder * Rear support stands * Loading ramps – 200 cm plus vehicle registration document/COC certificate €39.00 All prices include VAT. Images may not correspond to the standard equipment. Technical changes (e.g. tyre sizes) reserved. Delivery: Delivery by forwarding agent possible, €1.50 per transport kilometre one-way throughout Germany (from Seesen to the destination), at least €270 plus VAT. Visit us also at Here you can also order your desired trailer and accessories upon request: BLYSS Transporttechnik GmbH Gtjdpfethlrhex Affjt Dieselstr. 8 85084 Reichertshofen Tel.: BLYSS Transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel.: FINANCING OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images may not correspond to standard equipment. Technical changes (e.g. tyre sizes) reserved.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2018, dolžina tovornega prostora: 6.060 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 300 mm, Errors and prior sale excepted! Internal number: 1448. EQUIPMENT * Flatbed trailer * 3 axles * Jockey wheel Gtjdpfx Afevwh U Sofot * AL-KO coupling * Side planks all around ... and much more. ----The vehicle is offered in unrefurbished condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to take your vehicle in trade-in. Financing / leasing possible even without down payment! Do you have further questions? We are happy to advise you!

Stanje: novo, največja dovoljena obremenitev: 10.950 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: * Tire Pressure Monitoring System (TPMS) * EBS (Electronic Braking System) * Emergency Release Device for Spring Brake Cylinders * Drum Brakes Gsdpfx Afsv D Tbksfstt * 2 x 7 t BPW Axles * Air Suspension with Lifting and Lowering System * Mechanically Adjustable 3 m Warning Sign Boards at Front and Rear * Towbar Height Adjustable by 300 mm, with 40 mm Flange Eye * Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (Resulting in a B-Dimension of approx. 8,080 mm) * Front Landing Leg * Outward Folding Rear Support Legs * Plastic Toolboxes approx. 750 x 350 x 300 mm each, mounted on both the left and right sides * Side Impact Protection * Rear Underrun Protection * Plastic Quarter Mudguards * 15-Pin Electrical Socket * LED Lighting System 12 / 24 V * 2 Additional LED Reversing Lights at Rear (controlled via reverse gear) * 1 Removable LED Beacon (including bracket) at the rear * 400 mm high bolted front wall * 50 mm Softwood Floor * 2 Pairs of Container Locks (extendable to 3 m container external width) and lockable, locking dimension retracted per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension is not DIN-compliant) for an overall external width of 3,000 mm * Perforated outer frame bent at approx. 45° with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings possible every 600 mm – with 5 x 3 t UVV lashing rings fitted per side –, in each front and rear corner 1 x 6.3 t lashing ring (front, directly behind the container locks in the timber floor, and rear in the end cross member), various holes for 1.2 t lashing options in the front and rear cross members * 1 Pair of Aluminium Slide-In Ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated into the chassis beneath the loading area * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing leg, and flange tow eye painted in black * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Available from calendar week 09/2026

Stanje: rabljeno, največja dovoljena obremenitev: 15.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2007, ? Balastna platforma ? 50 mm vlečna kljuka ? 5 x pritrdilna ušesa ? Bobnaste zavore Gedpfxjw Sqi Ej Affjtt ? Listnato vzmetenje ? Podporne noge ? BPW osi Vsi podatki brez garancije / vmesna prodaja pridržana.

Stanje: rabljeno, največja dovoljena obremenitev: 14.170 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2006, dolžina tovornega prostora: 6.530 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, Skupna masa: 18.000 kg Lastna masa: 3.830 kg Nosilnost: 14.170 kg Skupna dolžina: 8.550 mm Dolžina nakladanja: 6.530 mm Širina: skupna širina 2.550 mm / širina nakladanja 2.540 mm Višina nakladanja: pribl. 1.000 mm Dodatne informacije - Tla iz trdega lesa z Omega profili - Stranske stranice prisotne - Dvojna kolesa - BPW osi - Prstani za privezovanje - LED vzvratne luči Godpfxsw N A Eyo Affett

Stanje: novo, največja dovoljena obremenitev: 30.500 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal - no on-truck installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed individual plastic mudguards * Rear straight steel mud flaps each with spray suppression * Lateral underrun protection * Front section ahead of the turntable platform extended approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (folding lids open to the rear) * Chassis made of high-strength fine-grained steel * Floor over the turntable platform made of 50 mm and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing rings 6.4 t front left and right on the main frame of the turntable platform, 1 pair of 13.4 t lashing rings per side at the front and rear on the outer frame, plus 1 pair of 10 t lashing rings per side swivel- and lowerable, loadable in all directions and recessed in the outer frame, bolted 5 t lashing rings to the outer frames of wheel recesses (2 for the front and 1 for the rear wheel recess), 2 pairs of 6.4 t lashing rings at the side in the excavator arm recess * 11 pairs of folding outriggers for 3 m overall width (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the extension boards made of sheet steel, mounted across the loading area in front of the 1st rear axle * Excavator arm trough above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide - front 340 mm deep, rear 220 mm deep - with retractable cover (storage for covers at the front of the turntable platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm Gtjdpfx Ajxmpydoffjt * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip part approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Load platform above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded platform height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear drop-down supports and loading ramps hot-dip galvanized * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 14/2026 * Sample images

Stanje: rabljeno, največja dovoljena obremenitev: 15.250 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2008, ? Platform for ballast weights ? 50 mm towing eye ? 4 x lashing eyes Gjdpfxjwfk R Do Affott ? Drum brake ? Leaf suspension ? Support legs ? BPW axles All information without guarantee / subject to prior sale.

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tyre pressure monitoring system * Emergency release unit for spring-actuated brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard on-board weight measurement system * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lighting * Straight drawbar with 50 mm towing eye and infinitely height-adjustable * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, right-hand side * Front closed individual plastic fenders * Rear straight steel spray guards with spray suppression * Lateral underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 recessed lockable storage compartments incl. covers * Chassis made of high-strength fine-grained steel * Turntable platform floor made of 50 mm and low-bed platform of 60 mm softwood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets per side (stakes not included) and 2 t lashing point each * Lashing package comprising: Two 6.4 t lashing rings front left & right on the main frame of the turntable platform * Two pairs 13.4 t lashing rings at outer frame, front and rear, and four pairs per side 10 t lashing rings, swivel and height adjustable * Loadable in all directions and recessed into the outer frame * Two pairs 6.4 t lashing rings in the excavator arm rest area * Eight pairs galvanized folding outriggers for 3 m overall width (not in rear slope area) * Extension boards stored in a compartment on the left side Gtedpfx Ael Tik Neffot * Excavator arm rest area above rear axle up to end of access ramp approx. 2,100 x 740 x 190 mm * Mechanical rear drop-down supports * Hydraulic folding ramps with hydraulically extendable ramp tips approx. 4,650 x 720 mm incl. hydraulic side-shifting ramps & load-holding valve * Deck area above slewing ring: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, drive-on ramps, folding outriggers, and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tank, and slewing ring painted black * Tyres 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Available from CW 07/2025

Stanje: rabljeno, največja dovoljena obremenitev: 7.200 kg, skupna masa: 9.000 kg, konfiguracija osi: 1 os, prva registracija: 03/2008, - Platform for ballast weights - 40 mm towing eye - 9 lashing rings - Drum brakes - Leaf suspension - Support legs - BPW axles All information subject to change / Prior sale reserved. Gtjdpfx Afewfku Aefst

Stanje: novo, največja dovoljena obremenitev: 16.400 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as an information tool on the trailer with pressure sensors for display of total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel panels, each with spray protection * Hinged lid (hot-dip galvanized) for toolbox on turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm (black powder-coated) mounted on right side Godpfsq Dyvcox Affett * 15-pin power connector * LED lighting 12/24 V * LED revolving beacon (removable), rear * Side marker lights with indicator activation * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display capability in the truck via EBS signal (no installation required on the truck) * Rubber covering on the folding ramps as well as on the inclined ramp surface, left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from front to rear cross beam * Hardwood flooring on the walking surfaces of the low bed platform * Four stake pockets per side, each with simultaneous 2 t lashing capability * Load securing package comprising 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions, recessed into the outer frame – in corners 13.4 t, otherwise 10 t * Six pairs of mechanical folding outriggers for 3 m total width (not in rear incline) * Plank holder under the cargo area, lengthwise * Roller stop in front of the front cross member, raised, with one 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically deployable tip section and load-holding valves * Hydraulic side ramp displacement * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump capacity in truck over 40 up to max. 140 l/min) * Hydraulic control block, splash-proof * Dual-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm ramped section) * Loaded platform height: approx. 890 mm +/- 20 mm with air suspension * Chassis, turntable, roller stop, folding extensions & ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks, etc. painted in black * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 15.150 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/1994, ? Platforma za balastne uteži ? 50 mm vlečna očesca ? 4 x pritrdilna očesa ? Bobnasta zavora Gjdpfx Afsw Sqilsfott ? Listnato vzmetenje ? Podporna stojala ? SAF osi Vsi podatki brez garancije / Vmesna prodaja pridržana.

Stanje: novo, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.380 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2024, * PT 30 Profile: * EBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes Gtedpfx Afetplwiefet * 3 x 11 t Gigant axles * Air suspension with lift and lowering function as well as RtR valve * Smart-Board mounted on trailer as information tool (separate axle load indication front and rear) * Tyre pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning board packages front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight, galvanised steel sheet skirts with spray protection * Contour marking tape, reflective on sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Drawbar 1,200 mm long with 40 mm towing eye and height adjustment by means of draw spring & turnbuckle * Tool box, galvanised steel, approx. 650 x 300 x 600 mm, black powder-coated, mounted on right side * Accessory box in turntable with folding lid, 2 built-in container locks (immediately behind turntable platform) * ROBOT-welded anti-slip coating on turntable platform steel plate (protruding weld seams) * Load securing package consisting of: 2 lashing rings (13.4 t) front left & right on front wall support, front & rear 1 pair UVV lashing rings (13.4 t) as well as 3 pairs each side UVV lashing rings (10 t), swivelling and lowerable, loadable in all directions and recessed in outer frame, each side 3 stanchion pockets with simultaneous 2 t lashing capacity * 6 pairs mechanical folding outriggers for 3 m overall width (not on rear bevel) * Widening boards stored in the centre of the load area * Hydraulic one-piece ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofitting of hydraulic ramp shifting * Chassis, turntable, folding outriggers, drop supports and approach ramps hot-dip galvanised * Axles, slewing ring, air tanks, drawbar painted in a shade of black * Loading edge height (laden): approx. 910 mm +/- 20 mm air suspension * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.000 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.290 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 950 mm, * PT 40.0 Profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with raising/lowering system and RtR valve * Manometer pressure display for load weight determination (axles separated into 2 air suspension circuits) * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel sets front and rear * Front axle: plastic quarter mudguards with spray protection * Rear axle: straight galvanized steel skirts with spray protection * Reflective contour markings on sides and rear Gedpfx Afjl Tlhrofstt * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power connector * LED lighting system 12 / 24 V * Removable LED beacon at rear * 2 LED reversing lights (activated via reverse gear) * Tow bar with 50 mm towing eye and height adjustment * Tool box made of galvanized steel, black powder coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Extension in front of turntable platform approx. 490 mm long with 45° corners * ROBOTER-welded anti-slip coating on the turntable platform steel plate * Load securing package consisting of: 1 x 13.4 t UVV lashing ring front left & right in front of bulkhead support, 4 mounting holes per side in the turntable platform each with 2 t lashing capacity, 1 pair of 13.4 t lashing rings suspended at rear left & right before the rear cross member, 4 pairs of 10 t UVV lashing rings per side, swiveling and lowerable, loadable in all directions and recessed into side frame, 3 stake pockets per side with 2 t lashing option each * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (not on the rear slope) * Timber plank holder for width extensions under the chassis, longitudinal left * Excavator arm rest above rear axle up to end plate, approx. 2,100 mm long and 190 mm deep, 2 pairs of 6.4 t lashing rings per side in the excavator arm rest * Hardwood flooring on the running surfaces of the low-loader platform * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), mechanically adjustable width * Ramp outer planks made of hardwood * Steel construction prepped for 6-way control sliders * Unladen loading height approx. 950 mm +/- 20 mm (chassis) * Turntable, folding outriggers, mechanical support legs, ramps are hot-dip galvanized * -- Axles, air tanks, tow bar painted black -- * Tyres 235/75 R 17.5 * Vehicle registered for one day in 07/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension, drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm mounted laterally right (black powder-coated) * Side underrun protection * Plastic quarter-mudguards Gjdjpk D D Hepfx Affjtt * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis – load height +20 mm * 50 mm softwood floor, clamped design * Preparation for subsequent fitting of container locks in front of the bulkhead * Bolt-on front wall made of smooth steel sheet * Trapezoidal-profiled side walls made of steel sheet, foldable with drop-side spring assists * Steel rear wall, retractable between the ramps – storage bracket inside front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring, front and end beams with multiple holes for 1.2 t lashing points * One-piece mechanical grated ramps with spring system for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted black * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Drop-side panels painted RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.700 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge for determining load weight (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, both with splash protection * Reflective contour marking tape on the sides and rear * Foldable toolbox lid (hot-dip galvanized) on the turntable platform * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * 2 x 7-pin electrical connectors Gtsdpol Tpwyefx Affst * 4 stake pockets per side, each offering 2 t lashing capacity * Load securing package including: 2 lashing eyelets (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant adjustable and folding lashing rings, loadable in all directions and recessed into the outer frame – corner capacity 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (except rear angle) * Broadening planks stored in the middle of the loading platform * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, folding widenings & ramps hot-dip galvanized * Axles, turntable, air tanks, etc. painted in black * Tires: 235/75 R 17.5 * Payload approx. 24,000 kg at 30,000 kg gross weight * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tyre pressure monitoring system with display capability in the truck via EBS signal, no installation required on the truck side) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t Gigant axles * Air suspension with lifting and lowering function * Drawbar height-adjustable by approx. 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted on the front wall * Side underrun protection * Plastic quarter mudguards * LED lighting system * 15-pin power plug * Hot-dip galvanized chassis, drawbar, front and rear wall * 50 mm softwood floor * Prepared for retrofitting 20" container locks at the front and rear * Bolted front wall made of flat sheet steel * Drop-down steel sheet side walls – trapezoidal profile – with drop-side spring assist * Hot-dip galvanized, bolted rear stanchions * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; one 6.3 t lashing ring in each corner, front and rear; various anchoring holes (1.2 t) in the front and end crossmembers * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (carrying capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles, stored at the rear in a compartment recessed in the chassis under the loading area * Vehicle fully hot-dip galvanized * New vehicle with manufacturer's warranty Gjdpjpk D Dqsfx Affett * Errors and prior sale excepted * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release mechanism for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem equalization unit * Drawbar with 50 mm flange drawbar eye and height-adjustable drawbar * Jost landing gear at front * External folding supports at rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood flooring * Pre-fitted for retrofitting container locks in front of the headboard * Bolted headboard made of smooth sheet metal * Trapezoidal profile steel side panels, foldable with sideboard spring lifter * Steel rear wall, insertable between the ramps; storage bracket inside the headboard when not in use * Bolted rear stanchions * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * In each front and rear corner, 1 x 10 t lashing ring; multiple holes in the headboard and rear cross-member for 1.2 t lashing options * One-piece mechanical grating entry ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear entry slope approx. 860 mm * Chassis, drawbar, headboard, rear wall, entry ramps and folding supports hot-dip galvanized * Sideboard painted in RAL 9010 pure white * Side panels can be painted in any RAL color at extra cost * Axles, springs, air tanks, drawbar eye, and landing gear painted black * New vehicle with full manufacturer's warranty * Errors and prior sale excepted Gsdpfx Afjl Th Hwsfstt * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.200 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2023, * ETÜ-TA-R 19.0: Gsdpfx Ael Tp Azsffett * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards * 15-pin power connector * LED lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor with clamped design * Mounting provision in front of the bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Split sidewalls made of trapezoidal-profile steel, foldable with central drop-in stanchion * Steel rear wall, can be slid in between the ramps – storage bracket when not in use located inside at the front bulkhead * Rear stanchions bolted * Perforated outer frame bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * Load securing package: 1 x 10 t UVV-certified lashing point in each front and rear corner, 2 x 8 t UVV-certified retractable lashing rings per side in outer frame, various holes in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be collapsed to 20 mm) * Rear drive-on angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, air tanks, flanged towing eye, and support winch painted in black * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Body side panels painted in RAL 9010 pure white * Side walls can be painted in any RAL shade at extra cost * Vehicle has a day registration (not in use) * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension * Drawbar height adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm Godpfeq Dyvyox Affett * Jost landing gear at the front * LED rear lights * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right on the outside of the front wall * Side underride protection * Plastic quarter mudguards * Hot-dip galvanized chassis, as well as drawbar, front wall, rear wall, tailgate, and loading ramps * 50 mm softwood floor * Fixture in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal profile steel sheet, folding, with board spring lifter * Steel rear wall, can be slid in between the ramps—storage bracket for rear wall in front of the front wall when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm, option to fit 3 t recessed lashing rings every 600 mm; in each front and rear corner one 6.3 t lashing ring; various holes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (retractable to 20 mm) * Approach angle at rear approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Side panel color RAL 9010 pure white * Painting of the side walls in a RAL color shade available at an extra charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf