Faymonville Multimax Satteltieflader (1+3) - Hydr. Gelenkt nakup rabljenega (56.901)

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions Fsdpfx Aetx Nwnel Hjpg * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually Fpjdpfjxarmasx Al Hog * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Fpodorgzv Njpfx Al Hog * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) Fodpoy Auh Isfx Al Hepg * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: rabljeno, največja dovoljena obremenitev: 49.900 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2020, naslednji pregled (TÜV): 01/2027, with air suspension, hydromechanical forced steering, single extendable loading deck, wheel recess, with rear chamfer and loading ramps Dimension B 11,300 mm Unladen weight 15,100 kg STZ-L Gooseneck - robust steel welded construction - formed loading area 3,900 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) - ball-bearing turntable saddle plate with replaceable 2" king pin and adjustable steering wedge - mechanical landing gear at the front Loading Platform - single telescopic, designed as an outer-inner tube construction with a fixed 300 mm section at the front - 300 mm sliding table on the inner tube, movable and lockable - locking of the extension stages via spring-loaded cylinders and conical pins - 1 pair of wheel recesses behind the 1st axle, depth 410 mm Chassis - 4-axle air-suspended chassis -1st axle is liftable and steered - SAF axle assembly, including three hydromechanically forced steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise/lower valve as standard for lowering to a minimum of 805 mm, or raising to a maximum of 1,050 mm - Loading height 860 mm - Excavator boom recess 3,850 mm long, 750 mm wide - Wheel recess behind gooseneck 410 mm deep - Wheel recess behind the 1st axle 410 mm deep Rear End - Design: "500 mm rear chamfer" - Short 1,240 mm rear overhang from the center of the last axle - Hydraulic rear support Loading Ramps - 2-piece loading ramps, length 2,855 mm / 1,415 mm, width 890 mm - Hydraulic ramp adjustment Brake System - 2-line, all-wheel compressed air brake system with diaphragm brake cylinders - Automatic load-sensing brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special Equipment - Wheel recess - Boom recess - Extendable widenings - Central lubrication system "BekaMax" - Electric power unit with radio remote control Technical Data Gooseneck Loading area (LxW): 3,900 x 2,480 mm 1,000 mm slope for Wirtgen machines Fedpfjy Iq Tdox Al Hspg Coupling height loaded: 1,250 mm Loading Platform Loading area (LxW): 8,800 x 2,550 mm Extendable by 2,800 mm Stepped up to (LxW): 11,600 x 2,550 mm Steering 1st axle liftable and steered 2nd to 4th axle hydromechanically forced steered (dual-circuit steering) Radio remote control Electric power unit

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Fpjdpfxervw U So Al Hjg Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: rabljeno, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.500 kg, dovoljena osna obremenitev (os 2): 12.500 kg, dovoljena osna obremenitev (os 3): 12.500 kg, prva registracija: 07/2000, skupna dolžina: 15.410 mm, skupna širina: 2.540 mm, skupna višina: 890 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, stanje pnevmatik: 50 odstotek, medosna razdalja: 12.460 mm, barva: drugo, Leto izdelave: 2000, Oprema: ABS, dvižna zadnja plošča, = Druge možnosti in dodatki = - 4 OSI - Zadnja loputa - Hidravlika - Zračno vzmetenje - Krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70 R17.5 Znamka osi: SAF Zavore: bobnaste zavore Zadnja os 1: dvojna guma; Največja osna obremenitev: 12.500 kg; Profil pnevmatik: 50% Zadnja os 2: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 60% Zadnja os 3: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 70% Zadnja os 4: dvojna guma; Največja osna obremenitev: 12.500 kg; Krmiljena; Profil pnevmatik: 30% Teže Lastna teža: 12.800 kg Nosilnost: 68.450 kg Fpodpfx Ajy Rax Ujl Hjg Skupna dovoljena masa: 81.250 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: dobro Identifikacija Registrska številka: ZZ-98-52

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: Fpsdpfx Aoyhkrljl Heg * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) Fedpfxextc Uhs Al Hspg - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Fedpfx Alsg Sk Tre Hopg Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.500 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, Oprema: ABS, Auflieger ausziehbar um 7700 auf 21300 mm Gesamtlänge, elektrische Hydraulikpumpe, Handpumpe für Hydraulikanlage, Fremdstartsteckdose NATO, 3 x Rungentaschenschiene(n) mittig auf der Ladefläche, 10 x Rungenstecktaschen je Seite, 10 Paar Schwerlast - Zurrösen im Boden versenkt, Rundumkennleuchte / hinten, JOST Stützwinden, ABS, EBS, Achse(n), Achsen sind hydr. nachlenkbar, Trommelbremsanlage, Luftfederung mit Hebe- Senkvorrichtung, Zentralschmieranlage, Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein SI86629 Fpsdpfx Aoyumitel Hjg Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an!

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.500 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, Oprema: ABS, Extending trailer with total length adjusting from 7,700 to 21,300 mm; electric hydraulic pump; manual pump for hydraulic system; NATO external jump start socket; 3 central stanchion rail(s) on the loading surface; 10 stanchion pockets per side; 10 pairs of heavy-duty lashing rings recessed into the floor; all-round warning light/rear; JOST landing gears; ABS; EBS; axle(s); axles are hydraulically steered; drum brake system; air suspension with lift-lowering device; central lubrication system; vehicle may be decorated or labeled with advertising. SI86629 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly make you an offer through our partner workshops! The vehicle may be decorated or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing quote for this item. Fpodpfeyumi Hox Al Heg Please contact us!

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. Fjdpfjwta Alex Al Hspg WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment: Fsdpjy Auhhjfx Al Hspg Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear chamfer * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized * 1 LED work light mounted top left and right on the front wall, wired to the connection strip for the tractor LOADING AREA: * Loading area approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface with 5 mm steel plate reinforcement on lifting bed and loading area, rated for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered * 3rd axle with electromagnetic reverse lock, can be activated by reverse gear or manually * 1st axle with start-up aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edge of the ramp tips, switch located next to ramp control * Ramp locking in driving position via quick-release * Sand coating painted on external frame of the ramp and on the ramp tip * Mechanical lateral drop leg supports in the ramps for docking to unloading ramps * Hydraulic ramp control valves on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Wheels silver grey * Sideboards natural aluminium * Wheel hubs according to axle manufacturer * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connection strip for supply lines to the tractor, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain attachment points on inner left/right of the front wall, incl. Alu tray underneath left/right for storing chains or straps * Behind the front wall screwed-on DELIGNIT panel (approx. 12 mm thick) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope presser roller * Deflection pulley for winch with shackle and bolted lashing point

Stanje: novo, največja dovoljena obremenitev: 38.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment list. Full specification available upon request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10° and integrated hook-in strip for attaching loose aluminium access ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the current platform length * Technical fifth-wheel load: 18,000 kg * Suitable for 4x2 and 6x2 tractor units * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand subject to availability * ASPÖCK-UNIBOX * 3 kW electro-hydraulic pump unit for controlling hydraulic functions. Without installation of supply ports on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - the first three pairs lying flat (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 inch kingpin Fpodpfx Aley Augds Hjg * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load approx. 50,000 kg * Approx. 32 mm timber floor on gooseneck and platform, encased in aluminium omega profiles * 10 pairs of recessed lashing rings, foldable outward, in the outer frame of the platform * In front of the last axle and on the rear cross member of the semi-trailer, 1 pair of lashing rings each (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading platform, on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform, left side in direction of travel * Bevel at the rear cross member of the vehicle, approx. 350 mm x 10° * Integrated hook-in strip for loose aluminium access ramps at the rear cross member of the vehicle * 1 pair of drop-in supports at the rear cross member * Remote steered axles from the front and rear using cable remote control, with single-track axle alignment, no installation required in the tractor unit * Round NATO socket at the front connector socket panel (Maeler & Kaege VG 96 917) * 1 LED work light on each side, left and right, mounted on the front wall with wiring to the connector socket for the tractor unit * On the extension an additional locking point every 500 mm * Holder for plug-in stakes, for storage when not in use, inside the front wall of the gooseneck * 4 wheel chocks with holder under the loading platform * Galvanized, sliding width extensions, extendable by approx. 230 mm per side (without timber planks) * 1 LED work light each side, left and right, in front of the axles with wiring to the connector socket for the tractor unit * 2 axle load gauges mounted on the left-hand side including axle load diagram * 1st axle with traction aid * Mounts for warning signs under the gooseneck and at left and right on the rear cross member * A

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimal load deck length, length approx. 3,700 mm, rear end with chamfer approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Load deck: - Load deck, approx. 9,700 mm long with hydraulically folding and lowering rear section, as well as hydraulically liftable deck at the front for driving over the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steering on trailing arm - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manual switch - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - 235/75 R 17.5 3PMSF twin tyres - TPMS tyre pressure monitoring system compliant with ECE R 141 Included accessories: - Plug-in steel front wall approx. 400 mm high Fpsdpfx Alsyw R Sro Heg - Yellow-red air couplings on the front connection rail - 3 kW electro-hydraulic power pack for control of hydraulic functions, except hydraulic winches - Outer beams on the gooseneck with fixing holes for screwable lashing rings - First hole approx. 200 mm from front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - One mounting hole on the upper rear area of the outer beams of the gooseneck for a screwable lashing ring - On gooseneck and rear chamfer, grating covering with 5 mm plate reinforcement - 2" kingpin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket on the front connection rail (Maeler & Kaege VG 96 917) - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodised - 4 wheel chocks - Electric cable winch, approx. 5,400 kg pulling force, with remote control - Wire rope approx. 24 m long, rope diameter approx. 9.5 mm, incl. rope pressure roller - Winch mounted at the front inside of the gooseneck - Plastic tarpaulin cover for the winch - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - Continuous grating covering with 5 mm plate reinforcement for additional strength, designed for point loads: - on the lifting bed - on the load deck - on the hydraulically lowerable rear section - Painted-on sand coating on the gooseneck covers and transitional areas between neck and lift bed, between lift bed and load deck, and between load deck and ramps - 1 spare wheel with mounting adapter under the load deck on the right in front of the axles - Hydraulic lifting bed, length approx. 2,500 mm, load capacity in driving position (raised): 9,000 kg - Hydraulic cylinders fitted with load-holding valves - Cut-outs in the outer frame of the load deck and lifting bed for lashing straps - Extensive lashing positions - Hydraulically lowerable rear section for loading/unloading and can be raised to reduce overall train length - Load capacity in driving position (horizontal): 10,000 kg - Reduction of overall train length when raised: 2,350 mm - Painted-on sand coating on the entire ramp, except for the extendable galvanised ramp section - Hydraulic, extendable rear extensions for loading and unloading - Remote control: - Lifting bed operation - Lifting device for rear extension operation - Extension of rear extension operation - 1st axle with traction aid - Central lubrication system with 1 pump - 4 warning boards, approx. 423 x 423 mm, extendable

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam Fjdjyvnd Njpfx Al Hjpg * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: rabljeno, lastna masa: 14.350 kg, največja dovoljena obremenitev: 48.650 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - SNT design gooseneck for optimized loading platform length, length approx. 3,700 mm - Gooseneck rear with approx. 1,000 mm x 10° bevel Loading Platform: - Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° - Recessed area in platform and bevel for accommodating the excavator’s dipper stick Ramps: - 1 pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood decking - Hydraulically folding ramp tips - Ramps hydraulically adjustable individually, approx. 235 mm outward and 215 mm inward - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the ramp outer frame Axles and Suspension: - BPW axles and suspension, first axle steering assist, all other axles forced steered hydromechanical - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse-lock, activated via reverse gear or manually - Air suspension with lift/lower valve - 235/75 R 17.5 tires - TPMS tire monitoring system Fsdpjyrfn Nofx Al Hjpg Included Accessories: - Detachable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic controls (except hydraulic winches) - Park position for warning signs on gooseneck when not in use - 1 spare wheel - Gooseneck outer beams with fixing holes for bolted lashing rings - First borehole approx. 200 mm from the front, then every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of recessed lashing rings at the rear of the gooseneck - Gooseneck with 1 pair of plug-in anodized ALU sideboards, approx. 400 mm high - Gooseneck with plug-in anodized ALU rear board, approx. 400 mm high - Gooseneck deck with 40 mm thick hardwood, with checker plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - Round NATO socket on the front connector strip - 4 wheel chocks - Mechanical landing legs with 2-speed gearbox and crank - Loading platform with continuous and between-axle interrupted approx. 50 mm thick hardwood deck - Platform locking with conically welded locking profiles every 250 mm - Including pre-tensioning plate - 1 intermediate table, approx. 300 mm wide, for extension tube with large cross-section; intermediate table has offset loading surface and extendable hanging rails for aluminum bridging elements - 1 pair of lashing rings on the front cross member - 8 pairs of recessed lashing rings in outer frame of platform, can be folded outwards - Galvanized extensions extendable by approx. 230 mm per side - Wheel wells with square climbing bars, 15 x 15 mm, open continuously in front of the axles to the gooseneck cross member, approx. 700 x 410 mm - ALU covers for wheel wells, also usable as bridging elements for extension or as widening planks - Aluminum elements lockable onto extension tubes of the widenings - Extendable U-profiles for ALU covers - Wheel wells with square climbing bars, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - 1st axle with automatic lift axle function - 4 warning signs, approx. 423 x 423 mm - Radio and cable remote control

Stanje: rabljeno, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2024, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, Leto izdelave: 2024, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functional report. Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long - Gooseneck rear with chamfer, approx. 1,000 mm x 10° Loading platform: - Extendable loading platform, approx. 8,800 mm long, with chamfer at the rear approx. 500 mm x 10° - A recess in the loading platform and into the chamfer to accommodate the excavator's dipper stick - Pneumatic locking with conical locking bolts and reinforced locking positions - Hardwood surface on the chamfer of the loading platform Ramps: - 1 pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide - Ramps with hardwood inlay - Hydraulically foldable ramp tips - Ramps can be hydraulically shifted approx. 235 mm outwards and 215 mm inwards individually - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle with forced steering, all other axles hydro-mechanically forced steered - Technical axle load: 12,000 kg - Air suspension - Tyres 235/75 R 17.5 - TPMS tyre monitoring system - TPMS tyre pressure sensors Included Accessories: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for hydraulic operations - 1 spare wheel - Outer beams on the gooseneck with fixing holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings at the rear of the gooseneck - On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized - 2" kingpin - Round NATO socket at the front connection bar - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards - Extendable galvanized outriggers, approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm, open continuously in front of the axles up to the gooseneck crossmember, approx. 700 x 410 mm - ALU covers for the wheel recesses - Lockable aluminium elements fitted on the extension pipes of the outriggers - Widenable U-profiles for inserting the ALU covers - Wheel recesses with square climbing strips, 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - Lockable aluminium elements fitted on the extension pipes of the outriggers - 1 pair of mechanical rear supports - Remote steering control from both front and rear by cable remote control, with axle single-track alignment control - 1st axle with automatic lift axle function and start assist according to EU Directive 2021/535 - Under the gooseneck and at the rear crossmember left and right: 7-pin sockets with mountings for warning plates - Square climbing strips 20 x 30 mm, spaced approx. every 200 mm on the chamfered part of the loading platform outer frame - Central lubrication system with 1 pump, BEKAMAX - Radio remote control for steering in addition to cable remote - Wabco Smart Board system Fjdpfeypb Akjx Al Hjpg - 4 warning plates, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container Fodpfx Alehlz S Ns Hspg • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: Fsdpfok Aht Uox Al Hepg - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Leto izdelave: 2025, Oprema: ABS, You can find our complete range of vehicles, including those available for immediate delivery or short notice, on our website. Below is an excerpt from the equipment specification. The complete specification is available upon request. CARGO AREA: * Gooseneck, length approx. 4,300 mm, with central beam * Cargo area with double-extending design, length approx. 9,300 mm * A support table approx. 200 mm wide is solidly welded to the central beam Fpjdpfjxc Axxox Al Hog * Pneumatic locking with conical locking bolt and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the relevant cargo bed length (except the supply for the first locking point) * Technical fifth wheel load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system compliant with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntable * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Make: our choice * ASPÖCK UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations. No supply connections installed on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * 1 pair of lashing rings at the kingpin (LC 10,000 daN), all other lashing rings (LC 5,000 daN) * 4 pairs of stake pockets embedded in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted on the deck of the gooseneck for plug-in stakes approx. 100 x 50 mm; 1x at rear of gooseneck * 2-inch kingpin * Mechanical landing legs with 2-speed gearbox and crank * Approx. 32 mm wood flooring on the gooseneck and cargo area encased in ALU-omega profiles * 10 pairs of recessed lashing rings lying in the outer frame of the cargo area, foldable outward: - 1 pair of lashing rings each in front of the last axle and on the end traverse of the trailer (LC 10,000 daN) - all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets embedded in the outer frame of the cargo area, for plug-in stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left * Steering from front and rear via cable remote control, with single-track control of the axles, without installation on the tractor unit * Front wall made of steel, approx. 1,800 mm high, certified version according to EN12642:2016 XL * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light mounted left and right at the landing legs, wired to the tractor unit connection * 3 transverse stake pocket rails mounted on the cargo area floor, for plug-in stakes approx. 100 x 50 mm * 1 additional removable intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with hardwood covering * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the right * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the cargo area on the left * WADER container pockets integrated in the cargo area for the transport of: - 1 x 20' container at the center of gravity - 2 x 20' containers - 1 x 40' container * 1 LED work light each left and right in front of the axles

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear Fpodpfx Aleyhkqno Hsg * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Fpsdpfeyhkqujx Al Heg Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection Fpsdpoya E A Nofx Al Hsg - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm