Müller-Mitteltal Prikolica S Tristranskim Samovozom nakup rabljenega (58.743)

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 3 x 11 ton, osi BPW Eco * Listnate vzmeti * mehanski izravnalnik osi zadaj * stranski odbijač * vrtljive opore zadaj na okvirju voznega podvozja * mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * sprednji zaprti plastični blatniki in zadnji ravni pocinkani jekleni ščitniki, opremljeni s ščitniki proti brizganju * odsevni trak ob strani in zadaj * pokrov (vroče pocinkan), za orodjarno v platformi podvozja * orodjarna iz pocinkane jeklene pločevine, cca 650 x 300 x 600 mm – črna, prašno lakirana – na strani pod vozilom * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska luč (snemljiva) zadaj * vlečna prikolica s 40 mm vlepno palico in nastavitvijo višine s pomočjo vzmeti in zapornega mehanizma * na vsaki strani 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati možnost pritrjevanja * Paket La-Si, sestavljen iz: 2 vlepnih palic (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spuščajočih * obremenitev v vse smeri, vgrajeno v zunanji okvir v kotih, 13,4 t, sicer 10 t * 6 parov mehanskih iztegnjenih podstavkov za 3 m celotne širine (vendar ne na zadnjem nagibu) * podaljševalne deske pod tovorno površino, shranjene v predalu Nedpfeq Dyv Ijx Actowk * nosilec za žlico bagra, ki sega od zadnje osi do zaključnega nosilca, dolžina cca 2.100 mm (2 para 6,4 t pritrdilnih obročev na strani nosilca za žlico bagra) * hidravlične iztegnjene rampe (cca 4.650 x 720 mm) z hidravlično iztegnljivim končnim delom in varnostnimi ventili za zadrževanje tovorja, hidravlični bočni premik ramp * hidravlični razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 l do največ 140 l/min), dvojna hidravlična povezava * tovorna površina nad vrtljivim obročem: cca 1.960 x 2.520 mm * zadnja tovorna površina: cca 6.500 x 2.520 mm (vključno z 860 mm nagibom za vožnjo) * višina tovora cca 860 mm +/- 30 mm kompenzacijski agregat * podvozje, vrtljiv obroč, iztegnjeni podstavki, zadnje opore in iztegnjene rampe, vroče pocinkane. * osi, vzmeti, vlečna prikolica, zračni rezervoar itd., lakirane v črni barvi. * Novo vozilo z garancijo proizvajalca. * Pridržujemo si pravico do sprememb in napak. * Na voljo takoj, dobava iz Egestorfa.

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 10.100 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 03/2014, naslednji pregled (TÜV): 06/2027, vzmetenje: drugo, Leto izdelave: 2014, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, * Platforma, dolžina L = 6,71 m / širina B = 2,39 m * Nosilnost = 10100 kg Njdpfxjzl Eu Uo Actewk * 8 parov stranskih ograj ... Zračno vzmetenje, 1. lastnik, rabljeno vozilo, vključno z DDV.

Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11-tonne Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering device ----Drawbar: * 1,800 mm long drawbar with 40 mm towing eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck display via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General fittings: * Aluminium air tank * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame bent at 45°, hole pattern for lashing equipment, lashing force per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm spacing possible – each side is equipped with 12 pcs. 3,000 kg lashing brackets included in delivery * Each side has 5 pockets for 100 x 50 mm stake posts in the outer frame – stakes not included in delivery * 30 mm phenolic resin-coated plywood floor ----Drum supports: * 3 pcs. galvanised drum supports secured by container locks with side forklift pockets center/center 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-bracing * Permissible drum weight per cable support 6,000 kg * Without drive and drum brake * Support arm with clamping lock for securing drum shaft * Steel drum shaft 76 mm diameter, with centring and rotating ends * 2 locating rings * 2 centring cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for securing the drum against rotation and uncoiling by the customer ----Loading height: * Approx. 1,040 mm loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, underrun protection hot-dip galvanised * Axles painted in a shade of black ----Information: * Technical upgrade to 30 tonnes GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Nedpfsx Nli Njx Actewk * Available from week 51/2026

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: Nwjdpfx Acjl Th I Ajtek * Parabolic springs with mechanical rear axle equalization ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profil 30,0: Nedsx Ipb Hepfx Actowk ----Zavore: * Sistem zaviranja EBS * Sistem za hitro sprostitev zavor pri zračnih cilindrih * Bobnaste zavore ----Osi: 3 x 11 ton, osi BPW Eco ----Vzmetenje: * Listne vzmeti ----Povezava vlečnega droga: Povezava vlečnega droga s 40 mm vtičnico in nastavitvijo višine s pomočjo vzmetne povezave in napenjalnega mehanizma ----Elektrika / Osvetlitev: * Sistem za nadzor tlaka v pnevmatikah (RDÜ) * Sistem z več napetostmi * LED zadnje luči * Okrogla luč (odstranljiva) zadaj * 15-polni vtič ----Splošni dodatni deli: * Mehanski kompenzator osi zadaj * Stranski zaščitni element * Stranski oporni nogi zadaj na okvirju * Mehansko nastavljivi opozorilni znaki spredaj in zadaj * Sprednji plastični blatnik in zadnji ravno upognjen jekleni zaščitni element, oba s ščitnikom proti brizganju * Reflektirajoči rob po straneh in zadaj ----Nosilna površina za nizkopodsestni prikolici: * Zložljiva pokrova (vroče pocinkana) za orodje v platformi z vrtljivim podvozjem * Po eni strani 4 žepi za pritrditev (brez priloženih opornih drogov) s hkratno možnostjo pritrditve tovora * 6 parov mehanskih zložljivih nosilcev za 3 m celotne širine (vendar ne na zadnji poševnici) * Podaljševalne deske, nameščene na sredini nosilne površine ----Pripomočki za pritrditev tovora (paket LaSi): * 2 pritrdilne točke (6,4 tone) spredaj levo in desno na glavnem okvirju platforme z vrtljivim podvozjem * 5 parov pritrdilnih obročev UVV, vrtljivih in spuščljivih, obremenljivih v vseh smereh in vgrajenih v zunanji okvir - v kotih 13,4 tone, sicer 10 ton. ----Nosilec za bagerjevo roko: * Nosilec za bagerjevo roko nad zadnjo osjo do zaključnega nosilca, dolg približno 2.100 mm (2 para pritrdilnih obročev 6,4 tone, nameščenih na straneh nosilca) ----Rampe: * Hidravlične enodelne rampe (približno 3.000 x 720 mm) * Hidravlični stranski pomik rampe ----Nosilna površina: * nad vrtljivim obročem: približno 1.960 x 2.520 mm * zadnja nosilna površina: približno 6.500 x 2.520 mm (vključno z 860 mm poševnico) ----Višina nakladalne površine: * brez tovora približno 910 mm ----Pnevmatike: * 235/75 R 17,5, dvojne pnevmatike ----Barvanje: * Okvir, vrtljivo podvozje, povezava vlečnega droga in rampe so vroče pocinkane * Osi, vzmeti, zračni rezervoarji itd. so pobarvani v črni barvi * Vozilo je vroče pocinkano ----Informacije: * --Tehnično je možna največja dovoljena masa 30.000 kg-- * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do spremembe cen in razpoložljivosti ----Dobavni rok: * Takoj na voljo iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: Nwedpfxsl Thyqo Actek ----Brakes: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * 40 mm flange towing eye ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tyre pressure monitoring system ----General Attachments: * Jost support winch at the front * 2 x external drop-down supports at the rear * Closed single plastic mudguards * Folding A-board at the rear * Plastic underride guard buffer * Hot-dip galvanized approach protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, at the front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Trough Stops: * 2 removable trough stops for lateral centering of the troughs * Front trough stops pluggable in 4 positions with swivel-mounted stop ----Painting: * Hot-dip galvanized chassis * Axles, springs, air tanks and support winch painted in black ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles Nwedjl Thymopfx Actok * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal ETÜ-TA-R 11.9 Low Loader Tandem Trailer / Ramps * NEW VEHICLE without first registration, * Now immediately available in RAL 7016 Anthracite, Enquiry number: 11653 * Gross weight: 11.9t, Payload: 8.77t * Reinforced and certified body according to EN 12642 XL, incl. load securing certificate * 6.27m x 2.47m x 0.4m steel side walls, laser-welded, drop-down with 2 spring assists * Front wall bolted, smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized), stored in front of the ramps with empty holder behind front wall * Rear stakes bolted (hot-dip galvanized) * 50mm thick softwood floor * 4 UVV lashing rings LC 6300daN, recessed in front and rear cross members * 10 UVV lashing brackets LC 3000daN, recessed in the existing hole pattern in the external frame * Ramps: one-piece with hot-dip galvanized grating, non-slip version * Fixture in front of front wall for retrofitting container locks * Plastic toolbox in front of the front wall Nsdoyxbdbepfx Actswk * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 wheels), parabolic suspension * BPW axles with tyre pressure monitoring * EBS, 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40mm tow eye * 2 LED reversing lights at the rear of the trailer * LED lighting system for 12+24 Volt * Side marker lights with indicator function * 1 removable round LED warning beacon, including bracket and installation ---- * Trade-in possible * Financing available through our partners, with or without down payment/residual value, and various terms. Request a quote! ---- * Leasing example from our partner FM LeasingPartner: €485 per month net for 60 months, no down payment, zero final payment. Other terms with or without down payment/residual value possible. Ask us for a quote! We are an authorized MüllerMitteltal dealer! ---- * Our opening times: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * Outside these hours we are available by appointment * We speak German, English, Russian, Polish and French.

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za cilindrične zavorne akumulatorje ----Osi: * 2 x 7 t Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Potezna prikolica / prikolica s prikolico: Nwsdpfx Acjq Dyvvetsk * višina potezne prikolice nastavljiva za 300 mm * podaljšek potezne prikolice za 250 mm na 2.250 mm * 40 mm prikolica s prikolico ----Osvetlitev / Elektrika: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni mehanizem Jost * zunanji pocinkani, zložljivi podpiralni nogari na zadnji strani * plastična orodjarna škatla na sprednji desni strani na čelni steni * stranski zaščitni element * plastični stranski odbijač ----Ploščad prikolice: * 50 mm deska iz iglastih vrst lesa * pred čelno steno naprava za naknadno montažo zaklepnih mehanizmov za kontejnerje * čelna stena, privita iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnih dvigal za stransko steno * jeklena zadnja stena, ki se lahko potisne med rampe - nosilec, ko se ne uporablja, na notranji strani pred čelno steno * zadnji okvir, privit ----Varovanje tovora: * luknjan zunanji okvir, nagnjen za približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna vgradnja 3 t pritrdilnih točk na vsakih 600 mm * na vogalih spredaj in zadaj po 1 x 6,3 t pritrdilna točka * v čelni in končni nosilni konstrukciji različne luknje za 1,2 t možnost pritrditve * pritrdilna letva Profifix na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se potisnejo skupaj do 20 mm) * sprednji naklon na zadnji strani, približno 860 mm ----Barvanje: * pocinkana šasija, potezna prikolica, čelna stena, rampe in zadnja stena * barva stranske stene v RAL 9010, čisto bela * barvanje stranskih sten v RAL barvnem odtenku je možno proti doplačilu ----Informacije: * --Okrepljena in certificirana konstrukcija po EN 12642 XL, vključno s certifikatom za varovanje tovora-- * novo vozilo s proizvajalčevo garancijo * napake in vmesna prodaja pridržane ----Dobavni rok: * takojšen dobavni rok iz Egestorfa

Stanje: novo, največja dovoljena obremenitev: 13.410 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.995 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 11 m³, Leto izdelave: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display capability in the truck dashboard via EBS signal (installation on the truck side not required) * 2 x 9 t Gigant axles * Air suspension with level control during tipping operation * Drawbar with 50 mm flange towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gears at the front * Folding galvanized steel underrun protection for paver loading * Closed plastic single mudguards * Standing platform on the front wall * Manual sliding tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel three-way tipper body (side walls with MM profile - continuous without side posts - swinging with manual central locking and drop-down left side wall with board spring lifter) * Tarpaulin similar to RAL 7038 agate grey with side tension by ratchet straps and elastic cords at the front and rear * Front wall platform made of grating with step at drawbar and hand grip on the front wall * Rear wall – made of HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 x 3 t recessed and foldable lashing rings per side – integrated into steel floor Nwsdoxl Nkgspfx Actok * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * Side wall paintwork in your desired RAL color (no special or metallic paintwork) – changeable up to approx. 6 weeks before completion * Axles, air tanks, landing gears, flange towing eye painted in black tone * Chassis, underrun guard and drawbar hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Available from approx. week 44 / 2026

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle Nwodpfx Aor Dpz Hectek * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema = - Rezervno kolo Nwjdpfxexw T Uao Actsk - Dvojne pnevmatike = Opombe = Müller Mitteltal 2-osni nizkopodni priklopnik T5 2AL z rampami Zračno vzmetenje BPW osi ABS ZSA Pnevmatike 60% GR 235R17,5 ID številka 665 Z veseljem vas pričakujemo za svetovanje, podpis pogodbe ali prevzem vozila v našem avtohiši. Prosimo, da se predhodno dogovorite za termin. Če ne morete priti k nam, vam celoten postopek uredimo tudi po telefonu/e-pošti/WhatsAppu/faksu. Po želji vam novo vozilo dostavimo neposredno na vaš dom. To za vas pomeni najboljšo ceno, največjo varnost in udobje pri nakupu vozila. Odkup rabljenih vozil Z veseljem odkupimo vaše rabljeno vozilo. Ponujamo vam možnost digitalne ocene vozila na podlagi vaših fotografij, brez obiska avtohiše. Naša specializirana odkupna ekipa vam zagotovi najvišjo odkupno ceno. Na željo vam po vsej Nemčiji dostavimo izbrano "rabljeno vozilo" neposredno do vaših vrat ter vaše rabljeno vozilo vzamemo s seboj. Financiranje - Leasing Takojšnja odobritev in poplačilo starega kredita. Vaš specializiran partner za osebna vozila, dostavnike, gospodarska vozila in gradbene stroje. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrijska cona) Obiščite našo spletno stran Vedno preko 400 vozil na zalogi Navedbe v oglasih, na spletu, cenikih in slikah so nezavezujoči opisi in ne pomenijo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti ali jamstva za tipkarske napake oziroma napake pri prenosu podatkov. Oprema, navedena v oglasu, je lahko predmet posebnega preverjanja. Ponudba je na splošno brez nove TÜV homologacije - z veseljem izdelamo ponudbo v sodelovanju z našim partnerskim servisom. Možnost napak in predhodne prodaje pridržana. = Dodatne informacije = Lastna teža: 8.900 kg Nosilnost: 26.100 kg Dovoljena skupna masa: 35.000 kg Prodajna cena: 18.000 € / 20.890 US$

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izredno sprostitev zavor za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolično vzmetenje z izravnalnim agregatom Njdpfx Ajrvvfljctswk ----Potezna priprava / priključna priprava: * potezna priprava, nastavljiva po višini za 300 mm * podaljšek potezne priprave za 250 mm (na 2.250 mm) * 40 mm priključna priprava ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED osvetlitev ----Splošni dodatni deli: * sprednji podpiralni stojalo Jost * zunanja, vroče pocinkana, zložljiva podpiralna stojala na zadnji strani * plastična orodjarna škatla na sprednji desni strani, na čelni steni * stranska zaščita * plastični četrtni blatoohranilnik ----Ploščad nizkopodsestnega priklopnika: * 50 mm iglasta lesena plošča * pred čelno steno naprava za naknadno namestitev kontainerjev * vijolična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – zložljive s pomočjo vzmetnih dvigal * jeklena zadnja stena, ki jo je mogoče vrinati med rampe – držalo pri neuporabi znotraj, pred čelno steno * zadnja ograja, vijolična ----Varovanje tovor: * luknjast zunanji okvir, upognjen pod kotom približno 45 stopinj, z 2 t vlečne sile na vsakih 480 mm * možna je vgradnja 3 t pritrdilnih elementov za pritrditev tovora na vsakih 600 mm * v vogalih na sprednji in zadnji strani po 1 pritrdilni element s 6,3 t vlečne sile * v čelni in zaključni prečki različne luknje za pritrditev tovora z 1,2 t vlečne sile * Profifix pritrdilna letva v vzdolžni osi, na sredini, za pritrditev tovora do LC 3000 daN ----Rampe: * enodelne mehanične rešetaste rampe z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (mogoče jih je pomikati skupaj na 20 mm) * nagib za vožnjo na zadnji strani, približno 860 mm ----Barvanje: * vroče pocinkano podvozje, potezna priprava, čelna stena, rampe in zadnja stena * barva stranic v RAL 9010, čista bela * barvanje stranskih sten v enem RAL odtenku je možno po dogovoru ----Informacije: * --ojačan in certificiran nadgradnji po EN 12642 XL, vključno s certifikatom za varovanje tovor-- * novo vozilo z garancijo proizvajalca * napake in vmesna prodaja pridržane ----Dobavni rok: * takoj na voljo iz Egestorfa

Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer set ----Drawbar / Flange eye: * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----General attachments: * Jost mechanical landing gear in front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at the central locking mounting points as well as 2 hooks on the front wall ----Chassis: * Chassis fabricated from fine-grain steel ----Tipper body: * Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters * Rear stanchions bolted * Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors * 4 mm fine-grain steel floor plate * Rear mounting rails for loading ramps ----Load securing: * Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame ----Ramps: * One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles * Rear lockable storage compartment for ramps integrated underneath the load area in the chassis ----Tyres: * Tyres 285/70 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized * Axles, springs, air reservoirs, and landing gear painted in a shade of black * Side wall paintwork in RAL 9010 pure white * Other RAL color tones for side walls available at extra cost ----Additional Information: * Reinforced body with load securing certificate * Vehicle comes with one-day registration (never used) Nwjdpfjl Th Duex Actok * Subject to errors and prior sale ----Delivery time: Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips Nwsdpfx Ajpk D Awsctok * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: rabljeno, lastna masa: 4.300 kg, največja dovoljena obremenitev: 10.100 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 03/2014, naslednji pregled (TÜV): 06/2027, vzmetenje: drugo, Leto izdelave: 2014, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, * Platforma, dolžina L = 6,71 m / širina B = 2,39 m Nsdjzl Evfepfx Actjwk * Nosilnost = 10.100 kg * 8 parov nosilcev ... Zračna vzmet, prvo vozilo, rabljeno vozilo, vključno z DDV.

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) Nwsdpfxer Dpzue Actek ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 29.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2010, naslednji pregled (TÜV): 05/2026, Mera-B 11.750 mm Lastna teža 10.250 kg Obremenitev osi 2 x 10.000 kg Nwodpfx Acjxpmmmjtek Nakladalna dolžina nad vrtečo ploščo 2.400 mm vklj. 350 mm poševnine Nakladalna dolžina 7.700 mm vklj. 900 mm poševnine Višina nalaganja 880 mm Širina 2.550 mm, razširljivo na 3.000 mm Utornica za odlaganje izkopalnega kraka (DxŠxV cca 2.500 x 740 x 180 mm) SAF osi z zračno vzmetenjem 2-delne hidravlične rampe, 2.100 mm + 2.000 mm dolge, 650 mm široke vklj. Rampe hidravlično nastavljive Hidravlična podpora zadaj Izsek za kolo za drugo osjo Izsek za sprednje kolo, zgoraj dolžina cca 2.000 mm x 1.100 mm, spodaj globina cca 350 mm Izseki za kolesa med 3. in 4. osjo Izsek za zadnje kolo, zgoraj dolžina cca 1.300 mm x 550 mm, spodaj globina cca 220 mm

Stanje: rabljeno, največja dovoljena obremenitev: 29.640 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2018, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.716 mm, Oprema: ABS, Schwarzmüller SPA 3/E Korito za kolute Prva registracija: 12/2018 Dvižna os SAF osi Drsna ponjava Drsna streha Portalna vrata Korito za kolute 7.500 mm Kolutne zavore ABS Pnevmatike 385/65 R22,5 Stanje pnevmatik: 1. os 13 mm 2. os 14 mm 3. os 11 mm Nwedpfx Acjyklmiotsk Nakladalna višina 2.716 mm Rezervno kolo Lastna teža 6.360 kg Skupna teža 36.000 kg.

Stanje: rabljeno, največja dovoljena obremenitev: 25.100 kg, skupna masa: 35.330 kg, konfiguracija osi: 3 osi, prva registracija: 03/2013, naslednji pregled (TÜV): 03/2013, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, Leto izdelave: 2013, Oprema: ABS, PRVA ROKA, ODLIČNO STANJE HANGLER L13,6M B2,48M H2,65M POSEBNI POLPRIKOLICA ZA OBSTRANSKI VILIČAR, FIKSNA ALUMINIJASTA STREHA, PALICNI SISTEM ZA ZAVAROVANJE TOVORA, TEŽA SPREDAJ OB TLEH ZA OBSTRANSKI VILIČAR, STRANSKA STENA, DRSNA PONJAVA, ZADNJA OS SILJENO KRMILJENA, KRMILNA OS, ZRAČNO DVIGALO, BPW OSI ECOPLUS, ABS, KOLUTNE ZAVORE, TAKOJ PRIPRAVLJENO ZA UPORABO, LASTNA TEŽA 9900 KG Stanje Splošno stanje: zelo dobro Nwsdpfxsyd T Egj Actjk Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro

Stanje: rabljeno, največja dovoljena obremenitev: 2.880 kg, skupna masa: 5.000 kg, konfiguracija osi: 1 os, prva registracija: 12/2005, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 6.500 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.300 mm, Oprema: ABS, * Ackermann Z-pa-f 5/7 odprti priklopnik * Prva registracija 12/2005 * GVW: 5t, nosilnost: 2,88t * GFA os zračno vzmetena, bobnaste zavore * Nastavljivo vlečno drogo z 40 mm ušesom, višina 0,8 m * Pnevmatske gume 235/75R 17,5 (14-12 mm) * ABS * Dimenzije: 6,50 m x 2,48 m x 1,30 m, aluminijaste stranice 40 cm * 5 stebričkov/pritrditvenih letvic prečno na nakladalno površino * + 5 lesenih prečk prečno na nakladalno površino z okroglimi luknjami za stebričke * 7 parov zložljivih pritrdilnih obročkov na zunanjem okviru * Edscha pomična streha, pomična ponjava * Plastična shramba * Tehnični pregled do 03/2027 * Odlično stanje---- Nedsy Dyp Hepfx Actewk * Naš delovni čas * Ponedeljek - Četrtek: 08:00 - 17:00, Petek: 08:00 - 15:00 * WhatsApp Izven delovnega časa smo na voljo po dogovoru Govorimo nemško, angleško, poljsko, francosko----

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 205 kg, največja dovoljena obremenitev: 545 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.960 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 1.850 mm, Leto izdelave: 2026, Scope of delivery: 1x Martz Auto Trailer 296x150cm with jockey wheel, 750kg 1x High Tarpaulin 140cm in grey Description: The Martz auto trailer 296 x 150 cm with jockey wheel is a versatile and robust box trailer with a permissible total weight of 750 kg. Thanks to its large loading area, stable phenolic plywood floor, and galvanized steel side walls, this trailer is ideal for both private and commercial transport needs. Whether for gardening, around the house and yard, renovations, relocations, furniture transport, or goods delivery – this Martz car trailer offers ample loading space and practical features for numerous transport tasks. With a loading area of 2960 mm in length and 1500 mm in width, it is perfectly suited for carrying bulky goods, tools, building materials, garden waste, or furniture. The Martz auto trailer comes equipped with a jockey wheel, making it easier to maneuver, park, and hitch when unhitched. This is especially beneficial for frequent use. Additionally, 4 lashing rings are fitted to securely fasten your cargo. This ensures that furniture, machinery, boxes, garden tools, or other transport goods are held firmly in place during transit. Technical specifications: - Jockey wheel - 4 fitted lashing rings - Front and rear boards foldable Total weight: 750kg Unladen weight: 205kg Payload: 545kg Loading area length: 2960mm Loading area width: 1500mm Overall width: 1930mm Overall length: 4060mm Overall height: 920mm Side wall height: 400mm Side wall material: galvanized steel Features: jockey wheel, fitted lashing rings Manufacturer: Martz Trailer type: box trailer Suspension type: rubber torsion axle Drawbar type: V-drawbar Floor: phenolic plywood Wheels: 155/70 R13 Frame type: bolted Frame material: steel Applications: gardening, domestic use, moving/furniture transport, goods transport, and more Incl. high tarpaulin, 140cm (inner height: 185cm) Nwjdpey Uaygsfx Actjk We are happy to send you the vehicle documents in advance free of charge for 'self-collection'!

Stanje: rabljeno, največja dovoljena obremenitev: 9.320 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2016, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.500 mm, Oprema: ABS, dvižna zadnja plošča, Galliker ST 2A Prevozni sistem Stranske stranice Dvižna zadnja stena Kamera Interna št. za povpraševanje: 0626536 * Proizvajalec nadgradnje: Galliker * Tip: ST 2A * Lastna teža: 4.680 kg * Platnena nadgradnja s stranicami * ABS * EBS * 2 osi zračno vzmeteni * Kamera za vzvratno vožnjo * Streha Edscha * Aluminijasta zaščita proti naletu * Bobnaste zavore * Prevozni sistem (Durchladesystem) * Notranja razsvetljava * Dvižna zadnja stena: Zepro, maks. obremenitev 2.000 kg Dimenzije (tovor/prostor za nalaganje): Dolžina tovornega prostora: 7.300 mm Širina tovornega prostora: 2.470 mm Višina tovornega prostora: 2.500 mm Pnevmatike: * Sprednja os: 435 / 50 R 19,5 zračno vzmetena / 35% * Zadnja os: 435 / 50 R 19,5 zračno vzmetena / 35% ----Cena: 9.900,- EUR + 19 % DDV Za dodatna vprašanja nas lahko kontaktirate na spodnje telefonske številke: Nodpfx Aszd Igkectjwk Govorimo: nemško, angleško, francosko in ????? Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 19.930 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2023, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Napake in predhodna prodaja pridržane! Interna številka: 1448. Vozilo ni pripravljeno! Dostava po vsej državi je možna za doplačilo. Napake in predhodna prodaja pridržane. Z veseljem vzamemo vaše vozilo v račun. Nwsdjzdmnyepfx Actsk Financiranje / leasing možno tudi brez pologa! Imate še vprašanja? Z veseljem vas strokovno svetujemo!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.380 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, naslednji pregled (TÜV): 06/2027, višina nakladalnega prostora: 2.800 mm, Leto izdelave: 2021, Leto 2021 Francoska centina Nwjdszdr Aispfx Actok Dviganje/spuščanje Notranja višina mm 2.750 +50 + 50 + 50 +50 mm Odkrivanje/pokrivanje z zadnje strani Fiksne osi. 1. dvižna Pnevmatike 385/65 pri 40/50% Nosilec za palete Dvojni nosilec za rezervno gumo Predal Zadnja pločevina Odlično stanje