Tristrani nagibni priklopnik

MÜLLER-MITTELTAL 14,4 to Stahl 3-Seiten Kippanh., 385/55 R 19.5

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 14.4 ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Towing Eye: * Height-adjustable (approx. 300 mm), hot-dip galvanized drawbar with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized steel sheet, mounted on the right side * Plastic quarter mudguards * Two-step entry on the left side as access aid ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights ----Tipper Platform: * Steel pallet three-way tipping body * Continuous side walls at the top with internal tube reinforcement (without central stanchions), foldable using drop side spring lifters * Rear wall foldable and pendulum-mounted, with manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm fine-grain steel floor plate * Mesh hooks, rear mounting rail for drive-on ramps * Prepared for later retrofitting with side wall extensions ----Chassis: * Hot-dip galvanized chassis Dsdpfx Asl Th A Eel Hjkl ----Load Securing: * Each corner with 1 x 5 t lashing ring and each side with 4 x 3 t lashing rings embedded in the outer frame ----Aluminum Drive-on Ramps: * 1 pair of aluminum drive-on ramps approx. 3,570 x 400 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform integrated in the chassis, accessible from the rear ----Tires: * 385/55 R 22.5 tires ----Painting / Coating: * Axles, springs, air tanks, and landing gear painted in black * Chassis, drawbar, floor, front wall, and folding supports hot-dip galvanized * Sidewall finish in RAL 9010 pure white * Side wall painting in other RAL colors available at extra cost ----Info: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 29/2026

Stanje: novo, največja dovoljena obremenitev: 8.670 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2025, * KA-TA-R 11.9 Masterline: ----Braking system: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General attachments: * Tool box made of galvanized sheet steel, mounted on the right side * Bolted underrun guard * Plastic quarter mudguards * Jost mechanical landing gear at the front * Two rear mechanical hot-dip galvanized folding supports ----Tipper body: * Net hooks on the sides and rear integrated into the central locking brackets as well as 3 pieces mounted externally on the front wall * Hot-dip galvanized chassis * Steel 3-way tipping body * Full-length drop sides without center post, folding down with drop side spring assist * Rear flap drop-down and swinging, lockable via manual central locking * Hot-dip galvanized bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load securing: * 1 x 5 t recessed and foldable lashing ring in each corner * Additionally, 4 x 3 t recessed and foldable lashing rings in each side frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment integrated under the loading area at the rear of the chassis ----Tyres: * Tyres 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Sideboard painted RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * Floor and front wall hot-dip galvanized Dkjdpfx Alsq Hg Dxj Hjl ----Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex works Egestorf