Müller-Mitteltal Ka-Ta-R 11,9 Ml / 024 Lkw-Tandem-Dreiseiten-Kipp nakup rabljenega (57.215)

Stanje: rabljeno, lastna masa: 2.900 kg, največja dovoljena obremenitev: 7.600 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 01/2022, dolžina tovornega prostora: 5.040 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 140J, medosna razdalja: 990 mm, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 140J, velikost zadnje pnevmatike: 235/75R17,5 140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, 10 x pritrditvenih obročev, doplačilo za rampe: 800 € , Vozilo se prodaja in ponuja po naročilu, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Nwsdpfjzvpc Rox Afaok

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release system for spring-loaded cylinders * Drum brakes * Duomatic brake connection ----Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with ride height +30 mm via positioning cylinder * Starting aid for shunting and mandatory lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on the truck; also with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Drawbar Eye: * 50 mm flange-mounted drawbar eye, height-adjustable by +77 mm and -33 mm, for 2 t support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights, switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics Nwedpfxsx Dp Ats Afaek * Extended connecting cables for agricultural and forestry vehicles * Power supply for radio remote: 12+24 V via taillight ----General Attachments: * BPW landing leg at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminium wheels * Split-pin towing coupling (use only with retracted underrun protection) * Enclosed plastic half-shell single mudguards * Two-step access before the front bulkhead on the left side * Shovel and broom holders in front of the front bulkhead * 2 matte stainless steel toolboxes, approx. 650 x 350 x 320 mm, mounted right side * Enclosed side protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connections (engine end from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right), operated via radio remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hook system (Serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Control of hooklift via radio remote control * Remote control with rapid function when lowering, not when raising * Emergency stop switches left and right sides * Container supports with 4 lateral supports per side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist in lifting the main arm * 2 x mechanical fall supports at the rear * Approval for 20 t gross vehicle weight (2 x 9 t axles) and 2 t support load * Note: If the radio remote is outside the charging cradle, the service brake must be applied for radio release. Brake connections must remain connected at all times so the hydraulically/pneumatically operated valves can be opened. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unladen approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and fall supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as-new condition ----Delivery time: * Vehicle is immediately available

Stanje: rabljeno, največja dovoljena obremenitev: 14.300 kg, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2023, naslednji pregled (TÜV): 11/2026, Leto izdelave: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection ----Axle: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via positioning cylinder * Traction aid for shunting purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additionally supplied with cable for operation from the tractor) ----Air Suspension: * Air suspension with lowering function via radio remote control ----Drawbar / Flange Eye: * 50 mm flange screw drawbar eye – height adjustable by +77 mm and -33 mm – for 2 ton support load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lamps activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * Extended connection cables for agricultural and forestry vehicles * Power supply for radio control 12+24V via tail light ----General Attachments: * BPW landing gear at the front * Mechanical, extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-cut aluminium wheels * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 matt stainless steel toolboxes, approx. 650 x 350 x 320 mm, right side mounted * Closed side underrun protection can be used as advertising space Nwodpfx Aex Dp Agofajk ----Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic rear door (mounted front right) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift device (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg tractive force * Hook height 1,570 mm * Hooklift operated via radio remote control * Radio remote control with fast function during tipping, but not during winching * Emergency stop switches on both left and right sides * Container bed with 4 side supports each and one roll at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist with raising the main arm * 2 x mechanical folding rear supports * Approval for 20 ton gross weight (2 x 9 ton axles) and 2 ton support load * Note: If the radio control is outside the charging cradle, the service brake must be engaged to enable remote operation. Brake connections must remain connected at all times to operate the hydraulic/pneumatic control valves. * Monitoring system for underrun protection to ensure it is retracted while tipping ----Loading Height: * Unladen approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun guard, and folding supports hot-dip galvanized * Axles, air tanks, and front landing gear painted in black * Palfinger hooklift painted in black/yellow ----Information: * Subject to errors and prior sale * Vehicle in very good / like-new condition ----Delivery Time: * Vehicle immediately available

Stanje: novo, lastna masa: 3.740 kg, največja dovoljena obremenitev: 10.660 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.700 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55 R 19,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55 R 19,5, velikost zadnje pnevmatike: 385/55 R 19,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Trestenstranska prikolica, dolžina tovorne površine približno 5.700 mm, višina stranskih ograj 600 mm, pocinkana, višina tovorne površine pri obremenitvi približno 990 mm, 4 x pritrdilne točke na dnu, vsaka do 5 ton, 8 x pritrdilne točke na dnu, vsaka do 3 tone, ojačana opora menjalnika z možnostjo prilagajanja obremenitve in hitrega delovanja spredaj, široke pnevmatike: 385/55 R 19,5, podvozje: vroče pocinkano, doplačilo za: aluminijaste rampe (približno 3.520 x 400 mm), nosilnost para 10 ton in 2 zložljivi opori zadaj, cena: 1.900 evrov, tiskarske napake, spremembe in napake pridržane, ilustrativne slike, več podatkov na: !, Več podatkov: ! Nedpfszw Aiaox Afaowk

Stanje: novo, vzmetenje: drugo, barva: drugo, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Storage compartment for aluminium ramps, price per compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, -- printing errors, mistakes and changes reserved, sample images --, For more data see: !, More details: ! Nodpfx Ajzw Aigjfaswk

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Nwodpfx Aoy U A Elsfaek * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering function ----Drawbar / Flange Drawbar Eye: * Drawbar height adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B-measurement approx. 8,080 mm) * 40 mm flange drawbar eye ---- Electrics / Lighting: * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (switched via reverse gear) * 1 removable LED beacon (including bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Mechanically adjustable 3 m warning boards front and rear * Landing gear at the front * External folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each side left & right * Side underrun protection * Rear underrun guard * Plastic quarter mudguards ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 m container outside width) and lockable, locking dimension retracted to ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (this dimension not to DIN) with an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm - five 3 t UVV lashing brackets installed on each side * In each front and rear corner, 1 x 6.3 t lashing ring (front directly behind the container locks in the wooden floor, rear in the end cross member) * Various drill holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * 1 pair aluminium slide-in ramps approx. 3,310 x 410 mm (load capacity 8 t / pair) suitable for rubber-tyred and tracked vehicles * Rear stowage compartment under the loading area integrated into the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun guard, and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear and flange drawbar eye painted in black ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. CW 38/2026

Stanje: novo, največja dovoljena obremenitev: 8.900 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-ER 14.4 Flatbed: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in dimension B: approx. 8,080 mm) * 40 mm flange towing eye ---- Nwsdpfey U A Efsx Afaek Electrics / Lighting: * 15-pin power connector * LED lighting system, 12 / 24 V * 2 additional LED reversing lights at the rear (controlled via reverse gear) * 1 removable LED beacon (incl. holder) at the rear * Tire pressure monitoring system (TPMS) ----General Fittings: * Mechanically adjustable 3-metre warning panel sets, front and rear * Support winch (front) * External foldable support legs (rear) * Plastic toolboxes approx. 750 x 350 x 300 mm, mounted left and right * Side underrun protection * Rear underrun protection * Quarter mudguards (plastic) ----Loading Platform: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable to 3 m container external width), lockable – locked to ISO - DIN 15190 = 2,259 mm, extended = 2,819 mm (this measure is not to DIN), for an absolute external width of 3,000 mm ----Load Securing: * Perforated outer frame, approx. 45° angled with 2 t lashing capacity every 480 mm * Installation possible for 3 t drop lashing rings every 600 mm. (5 x 3 t UVV-certified lashing rings per side) * In the front and rear corners, 1 x 6.3 t lashing ring each (front directly behind the container locks in the wooden floor, rear in the end crossmember) * Various drilling holes for 1.2 t lashing points in the front wall and rear crossmember ----Ramps: * 1 pair of aluminium slide-in ramps, approx. 3,310 x 410 mm (load capacity 8 t/pair) – suitable for rubber-tyred and tracked vehicles * Storage compartment at the rear, recessed under the loading platform in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tanks, front support winch and flange towing eye painted black ----Further Information: * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. calendar week 38/2026

Stanje: rabljeno, lastna masa: 3.500 kg, največja dovoljena obremenitev: 9.500 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, prva registracija: 11/1993, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 500 mm, vzmetenje: jeklo, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, jeklena nadstavba, 2 osi, tandem, listnata vzmetna vzmet, pritrdilne točke, zaščita podvozja, oporni mehanizem na sprednji strani, nihajne zapornice. Nwsdpfezgu Sfjx Afaok Nadstavba: Tandem, 3-stranski nakladalni prikolica. Rezervno kolo na voljo proti doplačilu! PODATKI O DODATNI OPREMI SO NAVEDENI BREZ GARANCIJE, pridržane spremembe, vmesna prodaja in napake!

Stanje: novo, največja dovoljena obremenitev: 1.570 kg, skupna masa: 2.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.650 mm, širina tovornega prostora: 1.650 mm, višina nakladalnega prostora: 300 mm, skupna širina: 1.714 mm, skupna višina: 1.040 mm, Leto izdelave: 2026, Humbaur HT 202616 * Tovorni priklopnik * Priklopnik za osebna vozila * Tandem * Priklopnik z visoko nosilnostjo * Novo vozilo Nwsdpfow Scvdox Afajk * Zunanje mere: 4057 mm x 1713 mm x 1040 mm * Notranje mere: 2650 mm x 1650 mm x 300 mm * Skupna masa: 2000 kg * Nosilnost: 1570 kg * Lastna masa: 430 kg * Višina nakladalne površine: 700 mm * Pnevmatike: 13 palcev * V-oblika vlečne naprave, pocinkana v vročo kopel * 13-polni vtič in luči za vzvratno vožnjo * Osnovna plošča debeline 18 mm * Stranske stene iz eloksiranega aluminija z vgrajenimi skritimi zapahi, popolnoma odstranljive * Zanke za pritrditev tovorja, vgrajene v zunanji V-profil, nosilnost 400 kg na zanko, odobreno s strani Dekra * Podporno kolo * 19 % DDV Dodatna oprema: ponjava, loki, podpore itd. je na voljo. POZOR !!!!! OBVEZNO PREBERITE !!!!! Izrecno si pridržujemo pravico do vmesne prodaje, saj ta izdelek ponujamo tudi na drugih platformah. Priporočamo, da vozilo temeljito pregledate, da se izognete napačnim predstavam o njegovem stanju in primernosti za kupca. Pregledi so možni kadarkoli po predhodnem dogovoru in so izrecno zaželeni!!! Slike so podobne, lahko vsebujejo dodatno opremo, ki je predmet doplačila. Navedene notranje mere so približne. Pri novih vozilih lahko nastanejo dodatni stroški za dokumente za vozilo in prevoz. Napake in spremembe so možne! Brez jamstva! MOŽNOSTI ZA VZEM V IZMENJAVO ZA PRAKTIČNO VSE !!! MOŽNE SO IZMENJAVNE POSLOVKE IN PLAČILO NA OBROKE !!! Razstavni prostor: 58285 Gevelsberg, Am Sinnerhoop 17 Odpiralni čas: ponedeljek – petek od 8.30 do 17.00, sobota od 8.30 do 14.00 Vedno imamo na zalogi več kot 500 novih in rabljenih priklopnikov !!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Faks:

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Brake: * EBS (Electronic Braking System) * Emergency release for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including Ride-Through-Release (RtR) valve and manual lowering function for loading ----Drawbar / Flanged Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V fitted in underrun protection ----General Attachments: * Support winch at front * Fold-away rear support legs on the outside * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet – 3-way tipper body made of high-tensile fine grain steel with high M-Strong side panels and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet steel * Hardwood strip for excavator bucket screwed onto front wall * Continuous side panels – fold-down without center pillar, with sideboard spring-assist lifters and swinging function via manual central locking * Bolt-on rear stanchions * Combination steel swing doors at rear, 2-leaf, asymmetrically split, able to swing open 270° and lockable (not foldable), including additional swinging frame for automatic rear door opening when tipping; locking by galvanized rotating bar lock and central locking, deactivation function for automatic rear door opening when tipping backwards with opened swing doors * 4 mm steel floor plate * Two-step access on the left front * Rear ramp track for loading ramps ----Load Securing: * One 7 t lashing ring in each corner * Four 3 t lashing eyes recessed in the outer frame on each side ----Loading Ramps: * Recessed ramp compartment at rear of chassis * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear supports hot-dip galvanized * Sideboards painted in any desired RAL colour (excluding special or metallic paints), can be changed up to approx. 6 weeks before completion * Axles, air tanks, flanged drawbar eye, and front support winch painted in black ----Info: Nedsvin Ucspfx Afaswk * --Load securing certificate according to EN 12642 XL? * Errors and intermediate sale reserved ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: novo, največja dovoljena obremenitev: 13.600 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2026, * KA-TA-RT 18.0: ----Braking System: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated in underrun protection ----General Attachments: * Landing gear at the front * Fold-out support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel 3-way tipper body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet steel * Hardwood pad for excavator bucket bolted to front wall * Continuous, folding drop sides without central stanchion, with sideboard spring assist and manual central locking system * Screwed-in rear stanchions * Combination steel swing doors, asymmetrical 2-leaf rear wall, can be swung and locked at 270°, not foldable, with additional swinging frame for automatic rear wall opening during tipping, locking via galvanized rotary bar lock and central locking system, deactivation function for automatic rear wall opening when tipping reverse with open swing doors * 4 mm steel floor plate * Two-step entry left front * Rear mounting rail for loading ramps ----Load Securing: * 1 x 7 t lashing ring in each corner * 4 x 3 t lashing rings recessed into the outer frame on each side ----Loading Ramps: * Integrally mounted ramp storage at the rear of the chassis * 1 pair of aluminum loading ramps (10 t / pair) approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles Nedpfovin T Ssx Afajwk ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, rear folding supports hot-dip galvanized * Sideboard paintwork in RAL custom color (with exceptions for special or metallic paintwork); can be changed up to approx. 6 weeks prior to delivery * Axles, air tanks, flange drawbar eye, front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45 / 2026

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Notranja št. vozila: G400178 Na voljo takoj na našem dvorišču v Kaufungenu VEČ INFORMACIJ: Luis Lucena Viktoria Sologubova NEMŠČINA Müller-Mitteltal TS2 KOMPAKT prikolica za težke tovornjak ? 2 osi ? hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Prikolica z 2 osmi ima hidravlične rampe, zračno vzmetenje in nosilnost 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnični podatki: * Št. vozila: G400178 * Stanje vozila: Rabljeno vozilo * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Letnik: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemško vozilo Oprema: * Hidravlične rampe * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. ANGLEŠČINA Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 osi – hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Ta dvooksna prikolica je opremljena s hidravličnimi rampami za nakladanje, zračnim vzmetenjem in nosilnostjo 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnične specifikacije: * Referenčna številka: G400178 * Stanje: Rabljeno * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Leto izdelave: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemška prikolica Oprema: * Hidravlične rampe za nakladanje * Zračno vzmetenje * Dvooksna šasija Nsdpjzahg Dsfx Afajwk * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja sta možna po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Pridržana pravica do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v plačilo. Financiranje je mogoče neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalization unit with 100 mm wide parabolic springs ----Drawbar / Drawtube: * Fixed welded drawtube with low-maintenance ball joint for K80 ball coupling (offset by +77 mm / 33 mm via head plate), with raised bracket for connection lines ----Electrics / Lighting: * 12 V, 7 + 4 pin power supply * LED lighting system 12 / 24 V with protective grid * 2 LED work lights at the rear, switchable from towing vehicle without installation on towing side Nwodpfjr Dpzuex Afajk ----General attachments: * Support winch at the front * Mechanical drop-down supports at the rear * Side marker lights with indicator activation * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Hot-dip galvanized two-step access ladder in front of the front wall (on FR left) ----Chassis: * Fine-grain steel chassis ----Tipper body: * Steel Pal.- 3-way tipper body with M-Strong side panels (front wall fixed, continuous side panels - without center stanchions - swinging via manual central locking and mechanically foldable with sideboard spring assistor) * Hydraulic tailgate, 500 mm high, functioning as hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7-tonne recessed and foldable lashing point in each corner * 4 x 3-tonne recessed and foldable lashing rings on each side ----Ramps: * 1 pair of aluminum drive-on ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receiving compartments for aluminum drive-on ramps, recessed from behind into the chassis * Load securing according to EN 12642 XL ----Coupling height: * Laden approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Superstructure painted RAL 9010 pure white * Chassis, drawtube, rear supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in black shade ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Coupling Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter Nwedpfxju I Iqxj Afaek * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: Nodpfxsu I Iqlo Afaewk * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting Njdpfx Aeu I Iq Eofaewk * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate. Safety locking pins for various support heights * Closed steel mudguards with spray protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor inlay (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock on the drum arm ends, plus central claw lock securing the cable drum superstructure to the chassis * Motor-driven hydraulic cable drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped ----Chassis: * Chassis made from torsion-resistant square tubing and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Notes: * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector Nodpfxoq Dyvys Afajwk ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18,0: * 2 v 1 = za kontenerje in kot nizkotilni prikolici ----Zavore: * EBS – elektronski zavorni sistem * Naprava za hitro sprostitev zavor pri vzmetnih cilindrih * Bobnaste zavore ----Osi: * 2 x 10 t Gigant osi ----Vzmetenje: Nodpfxjzihcpj Afajwk * Zračno vzmetenje z dvigalom in spuščanjem ter RTR ventilom ----Povezovalna priprava: * Ukrivljena povezovalna priprava, dolžina 2.000 mm, z vrtljivo povezovalno glavo 40 / 50 mm (brez 8° oja) * GHD naprava za nastavljanje višine namesto vzmetne povezovalne droge ----Elektrika / osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v tovornjaku prek EBS signala – brez dodatne namestitve na tovornjaku * LED zadnje luči 12 / 24 V * 15-polni vtič ----Splošni dodatni deli: * Orodjarna omara iz jeklene pločevine s prašnim premazom, približno 1.000 x 300 x 600 mm * Nosilec za rezervno kolo na desni strani * Reflektivni obrobni trak na strani in zadnji strani * Stranski zaščitni element * Plastični zadnji odbijač s ščitnikom proti brizganju * Plastični zaščitni odbijač zadaj * Zložljiv znak "A" zadaj ----Tovor: * Glavno podvozje z dvignjenim zunanjim okvirjem za vodenje kontenerjev * Jeklena pločevinasta podlaga z vdolbinami za valje v območju voznega podvozja * Možna dolžina od 5.500 do 7.000 mm * Pnevmatsko zaklepanje z 4 jezički ter mehansko vstavljivi oporni koti spredaj v tiru, potrdilo o varovanju tovora v skladu s standardom DIN 30722 - 1 * Varilna črta kot protidrsna površina v območju tirnice rampe * Mehanska oporna opora zadaj ----Varovanje tovora: * 1 par 10 t UVV pritrdilnih pasov spredaj na nosilcu čelne stene * 3 pari 10 t UVV pritrdilnih pasov stransko v zunanjem okvirju * Na vsaki strani 4 x 2 t pritrdilne zanke v obliki deteljice * 4 x 8 t pritrdilne zanke, vgrajene v zunanji okvir ----Rampe: * 1 par aluminijastih naloževalnih ramp (10,6 t / par), 2.800 x 470 mm, primerne za vozila s pnevmatikami in gosenicami (zaklenljiv prostor za shranjevanje od zadaj) ----Barvanje: * Podvozje, vozno podvozje, deli za zaklepanje, zadnja oporna opora, vroče pocinkani * Povezovalna priprava, osi in kompresorji pa pobarvani v črni barvi ----Informacije: * Vozilo ima do 03.2027 polno proizvajalčevo garancijo * Pridržujemo si pravico do sprememb in napak * Prikolica je v odličnem stanju in je bila uporabljena največ 5-krat ----Dobavni rok: * Na voljo takoj, dobava iz Egestorfa ob avtocesti A7

Stanje: rabljeno, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18,0: * 2 v 1 = za kontejnerje in kot nizkotilna prikolica ----Zavore: * EBS elektronski zavorni sistem * Sistem za nujno sprostitev zračnih cilindrov * Bobnaste zavore ----Osi: * 2 x 10 t Gigant osi ----Vzmetenje: * Zračno vzmetenje s sistemom za dvigovanje in spuščanje ter ventilom RTR ----Povezovalna priprava: * Ukrivljena povezovalna priprava dolžine 2.000 mm s vrtljivo povezovalno glavo 40 / 50 mm (brez 8° ušesca) * Naprava za nastavitev višine GHD namesto vzmetne vlečne palice ----Elektrika / Osvetlitev: * Nadzor tlaka v pnevmatikah z možnostjo prikaza v vozilu prek signala EBS – brez vgradnje na strani vozila * LED zadnje luči 12 / 24 V * 15-polni vtič ----Splošni dodatni deli: * Orodjarna škatla iz jeklene pločevine s praškovnim premazom, približno 1.000 x 300 x 600 mm * Nosilec za kolo na desni strani * Reflektirajoč konturni trak stransko in zadaj * Stranski zaščitni element * Plastični četrt blatnika s ščitnikom proti brizganju * Plastični zaščitni odbijač zadaj * Zložljiv opozorilni znak zadaj ----Nosilna plošča: * Glavni okvir z dvignjenim zunanjim okvirjem za vodenje kontejnerjev * Jeklena pločevinasta podlaga z vdolbinami za valje na območju podvozišča * Možna dolžina 5.500 - 7.000 mm * Pnevmatska 4-delna zapora z objemkami ter mehanska vstavna opora spredaj na tirnici, potrdilo o pritrditvi tovora v skladu s standardom DIN 30722 - 1 * Varilni šiv kot protizdrsna površina na območju tirnice nakladalne rampe * Mehanske opore zadaj ----Pritrditev tovora: * 1 par 10 t. UVV pritrdilnih zank spredaj na nosilcu čelne stene * 3 pari 10 t. UVV pritrdilnih zank stransko na zunanjem okvirju * Na vsaki strani 4 x 2 t. pritrdilnih zank v obliki deteljice * 4 x 8 t. pritrdilnih zank, vgrajenih v zunanji okvir ----Rampe: * 1 par aluminijastih naloževalnih ramp (10,6 t / par) 2.800 x 470 mm, primernih za vozila s pnevmatikami in gosenicami (zaklenljiv prostor za shranjevanje od zadaj) Nodpfxszihcio Afajwk ----Lakiranje: * Podvozje, podvozišče, deli za zaklepanje, zadnje opore – vroče pocinkano * Povezovalna priprava, osi, zračni rezervoar – pobarvani v črni barvi ----Informacije: * Vozilo ima do 03.2027 polno garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Prikolica je v stanju, kot nova, in je bila uporabljena največ 5-krat ----Dobavni rok: * Takojšen dobavni rok iz Egestorfa ob avtocesti A7.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in oprema = - Rezervno kolo - Dvojne pnevmatike = Opombe = Müller Mitteltal 2-osni nizkopodni priklopnik T5 2AL z rampami Zračno vzmetenje BPW osi ABS ZSA Pnevmatike 60% GR 235R17,5 ID številka 665 Z veseljem vas pričakujemo za svetovanje, podpis pogodbe ali prevzem vozila v našem avtohiši. Prosimo, da se predhodno dogovorite za termin. Če ne morete priti k nam, vam celoten postopek uredimo tudi po telefonu/e-pošti/WhatsAppu/faksu. Po želji vam novo vozilo dostavimo neposredno na vaš dom. To za vas pomeni najboljšo ceno, največjo varnost in udobje pri nakupu vozila. Odkup rabljenih vozil Z veseljem odkupimo vaše rabljeno vozilo. Ponujamo vam možnost digitalne ocene vozila na podlagi vaših fotografij, brez obiska avtohiše. Naša specializirana odkupna ekipa vam zagotovi najvišjo odkupno ceno. Na željo vam po vsej Nemčiji dostavimo izbrano "rabljeno vozilo" neposredno do vaših vrat ter vaše rabljeno vozilo vzamemo s seboj. Financiranje - Leasing Takojšnja odobritev in poplačilo starega kredita. Vaš specializiran partner za osebna vozila, dostavnike, gospodarska vozila in gradbene stroje. ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (industrijska cona) Obiščite našo spletno stran Vedno preko 400 vozil na zalogi Navedbe v oglasih, na spletu, cenikih in slikah so nezavezujoči opisi in ne pomenijo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti ali jamstva za tipkarske napake oziroma napake pri prenosu podatkov. Oprema, navedena v oglasu, je lahko predmet posebnega preverjanja. Ponudba je na splošno brez nove TÜV homologacije - z veseljem izdelamo ponudbo v sodelovanju z našim partnerskim servisom. Možnost napak in predhodne prodaje pridržana. Nwsdpfxexw T Uae Afajk = Dodatne informacije = Lastna teža: 8.900 kg Nosilnost: 26.100 kg Dovoljena skupna masa: 35.000 kg Prodajna cena: 18.000 € / 20.890 US$

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange drawbar eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange-type drawbar eye ----Electrics / Lighting: * 15-pin electrical connector Nwsdspk Dyxjpfx Afajk * LED tail lights * RDÜ tire pressure monitoring system ----General equipment: * Jost landing gear at front * 2 x external drop-down support legs at rear * Enclosed single plastic mudguards * Foldable A-board at rear * Plastic underride protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box, W= 370 mm x D= 420 mm x H= 480 mm, front left & right ----Load securing: * 2 x 5.3 t UVV lashing rings each side for attaching tensioning elements * Includes 2 ratchet tensioners permanently mounted to the outer frame with chain box * Equalizer chain both sides with eyelet and quick shortening hook, Y-special version 6.3 t ----Container stops: * 2 removable container stops for lateral centering of containers * Container stops at front, pluggable in 4 positions, with pivoting stop ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks and landing gear painted in a shade of black ----Information: * Tension force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 16.000 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 700 mm, Leto izdelave: 2024, * KA-TA-RT 21.0 ML ----Braking System: * Without ABS/EBS, homologated for 40 km/h * Spring-loaded parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem-balance unit with 100 mm wide parabolic springs ----Drawbar Eye / Drawbar: Njdpjr Dpz Hsfx Afaewk * Rigid, welded drawbar with low-maintenance ball joint for K80 ball coupling (adjustable by +77 mm / 33 mm via mounting plate) with elevated gallows for connection lines ----Electrics / Lighting: * 12 V 7 + 4-pin power supply cable * LED lighting system, 12 / 24 V with protective grilles * 2 LED work lights at the rear, switchable from the towing vehicle, no vehicle-side installation required ----General Attachments: * Landing gear at the front * Mechanical drop legs at the rear * Side marker lights with indicator control * Plastic quarter mudguards * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right-hand side * Hot-dip galvanized two-step access steps in front of the bulkhead on the left (FR) ----Chassis: * Chassis made from high-tensile fine-grained steel ----Tipper Body: * Steel pallet three-way tipper body with M-Strong side boards (fixed front wall, continuous sides without central stanchions, swinging via manual central locking, plus mechanically folding with board spring lifters) * Hydraulic tailgate, 500 mm high, engineered as a hydraulic chute with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * Each corner equipped with 1 x 7 t recessed folding lashing ring * Each side fitted with 4 x 3 t recessed folding lashing points ----Ramps: * 1 pair aluminum loading ramps (10 t/pair for axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for rubber and tracked vehicles * 2 recessed storage compartments for aluminum ramps in the rear of the chassis * Load securing compliant with EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unladen approx. 590 mm ----Paintwork: * Bodywork painted in RAL 9010 pure white * Chassis, drawbar, rear support legs, underrun protection hot-dip galvanized * Axles, air tanks, landing gear (front) * K80 coupling painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: Nsdpjrwc R Refx Afajwk * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, prevoženi kilometri: 494.000 km, moč: 368 kW (500,34 KM), prva registracija: 01/2019, vrsta goriva: dizel, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 6.140 mm, širina tovornega prostora: 2.446 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2019, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, Proizvajalec: Volvo Model: FMX500 8x4 s tandem osjo/dvigalom, HMF Pendeltip Leto: 2019 Stanje: Dobro Serijska številka: YV2XT40G4KA838934 Nwjdpfozfyigox Afaek Ref. št.: 158077 Datum registracije: 31-01-2019 Motor: 13 litrov, 500 KM/375 kW, 2500 Nm Moč: 500 KM Kilometri: 494.000 Menjalnik: I-Shift, AT2612F, 12 naprej / 4 nazaj Euro tip: 6 Rezervoar za dizel: 1 Prostornina rezervoarja: 330 l Vzvratna kamera: ? Gretje kabine: ? Klimatska naprava: ? Tip kabine: FMX dolga kabina Usnjeni sedeži: ? Paket opreme: paket Comfort+ kabina Radio: ? Walkie-talkie: ? Kolutne zavore: ? ABS: ? Moto zavora: WEB+ Dimenzije pnevmatik: 385/65R22,5 - 385/65R22,5 - 315/80R22,5 - 315/80R22,5 Ostali profil: 70% - 10% - 30% - 20% Prednje vzmetenje: Zračno Zadnje vzmetenje: Zračno Medosna razdalja: 4.300 mm Orodjarna: ? Hidravlični sistem: ? Skupna masa: 35.000 kg Lastna masa: 14.170 kg Nosilnost: 20.830 kg Notranja dolžina: 6.140 mm Notranja širina: 2.446 mm Notranja višina: 1.000 mm Nosilnost kipa: HMF tristrani kip LTE 324 Leto (kiper): 2018 3-stranski kiper: ? Kazalnik obremenitve: ? Avtomatsko sesanje vreče: ? VBG napenjalec verige: ?

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: Nwedpfx Aforwc R Asajk * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf