Müller-Mitteltal Ka-Ta-R 11,9 Ml / 024 Lkw-Tandem-Dreiseiten-Kipp nakup rabljenega (56.936)

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Coupling Eye: Iisdpsu I Iqxefx Anroh * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted Iijdpfx Asl Thymsnreh ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: Isdpfx Anel Thyxeroih * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 14.660 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 19.0: Iedpfx Anel Th Hwereih ----Braking system: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: 2 x 10 t BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem compensation unit ----Drawbar / Flange drawbar eye: Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * 15-pin electrical connector * LED tail lights * RDÜ tyre pressure monitoring system ----General fittings: * Jost landing gear at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood flooring * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Drop sides made of trapezoidal profile steel sheeting, foldable with tailboard spring assist * Steel rear wall insertable between ramps - holder for storage when not in use in front of headboard * Bolted rear stakes ----Load securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * One 10 t lashing ring in each front and rear corner, various drill holes in the front and rear cross-members for 1.2 t lashing options * Profifix lashing rail along the longitudinal axis centre for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be collapsed to 20 mm) * Rear approach angle approx. 860 mm ----Paintwork: * Chassis, drawbar, headboard, rear wall, loading ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL colour available at extra cost * Axles, springs, air tanks, flange drawbar eyes and landing gear painted in a shade of black ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex-works Egestorf on the A7

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 10 kg, največja dovoljena obremenitev: 22 kg, skupna masa: 36 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 03/2016, naslednji pregled (TÜV): 02/2027, skupna dolžina: 12.500 mm, skupna širina: 2.550 mm, skupna višina: 800 mm, velikost pnevmatike: 205/65 R 17,5, največja hitrost: 80 km/h, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2016, Oprema: ABS, Rabljen prikolica Müller-Mitteltal TS 3 Profi * tehnično dovoljena skupna masa 36 ton (koristna nosilnost pri standardni dvooksni vlečni enoti približno 22 ton) * dolžina podaljška: 3,5 m * dolžina platforme: 8,90 m in višina 0,80 m * vdolbina za kolo na višini 0,45 m * hidravlične rampe (zelo nizke), dolge 4 m * podstavki Iiedpfjz Aua Ujx Anroh * pogon hidravlične črpalke preko vtičnice NATO * možnost pridobitve dovoljenja za prevoz z večjo širino * višina sedla: približno 1,15 m * naslednji tehnični pregled: 27. 08. * naslednji periodični tehnični pregled: 27. 02. * 1. os: dvižna os * 3. os: sledilna os * lastna teža: približno 10 ton

Stanje: rabljeno, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 02/1999, dolžina tovornega prostora: 8.200 mm, Dobrodošli pri Johanning's Nutzfahrzeuge, vašem specialistu za mlada in ekskluzivna gospodarska vozila in gradbene stroje. NA VOLJO TAKOJ! Dostava je možna po vsej Nemčiji. Lokacija: 15838 Luckenwalde Johanning's Nutzfahrzeuge, vaš partner za ekskluzivna in mlada gospodarska vozila in gradbene stroje. Naše storitve – vaše prednosti: (po prodaji) – možen odkup vašega vozila (ne glede na stanje) – brezplačna takojšnja odjava vozila – storitev registracije za 150 € (vključno s taksami in registrskimi tablicami) – kratek ogled in testna vožnja sta možna kadarkoli po dogovoru po telefonu – dostava na dom je možna po dogovoru. Pridržujemo si pravico do sprememb in napak. Isdpfezxwi Rsx Anreih

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka v primeru izredne zavore za vzmetne akumulatorje ----Osi: * 2 x 7 ton, osi Gigant ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna palica / prirobnična vlečna palica: * vlečna palica, višina nastavljiva za 300 mm * podaljšek vlečne palice za 250 mm (na 2.250 mm) * 40-milimetrska prirobnična vlečna palica ----Osvetlitev / električna napeljava: * RDÜ (nadzor tlaka v pnevmatikah) * LED-osvetlitev ----Splošni dodatni deli: * sprednji opornik Jost * zunanji, vročepocinkani zložljivi oporniki zadaj * plastična orodjarna škatla spredaj na desni strani na čelni steni Iiedpfjxglh Rsx Anroh * stranski zaščitni element * plastični zaščitni element za četrt kolesa ----Nosilna površina: * 50 mm debela deska iz iglavca * pred čelno steno naprava za naknadno namestitev zaklepnih mehanizmov za kontejnerje * vijična čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s pomočjo vzmetnega dvigala za stransko steno * zadnja jeklena stena, ki se lahko vrine med rampe - pritrdilni element, ki se uporablja, ko se ne uporablja, notri pred čelno steno * zadnji nosilci, vijični ----Pripomočki za pritrditev tovora: * perforiran zunanji okvir, nagnjen pod kotom približno 45 stopinj, z nosilnostjo 2 toni na vsakih 480 mm * možna je vgradnja 3-tonske pritrdilne zanke na vsakih 600 mm * v kotih spredaj in zadaj po 1 pritrdilna točka z nosilnostjo 6,3 tone * na čelni in zaključni palici različne vrtine za možnost pritrditve z 1,2 tone ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za delovanje z eno osebo, približno 2.750 x 600 mm (možnost zlaganja do 20 mm) * naklon na zadnji strani približno 860 mm ----Barvanje: * vročepocinkano podvozje, vlečna palica, čelna stena, rampe in zadnja stena * barva stranske stene RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je možno za doplačilo ----Informacije: * --ojačana in certificirana nadstavba v skladu s standardom EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * novo vozilo z garancijo proizvajalca * napake in medvmesna prodaja pod pridržkom ----Dobavni rok: * na voljo približno od 41. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 10.760 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 14,4: ----Zavore: * bobnaste zavore * elektronski zavorni sistem (EBS) * naprava za izpust zraka iz zračnih posod v primeru izredne zavore ----Osi: Iiedpfxjxglibj Anrsh * 2 x 7 ton Gigant osi ----Vzmetenje: * parabolične vzmeti z izravnalnim agregatom ----Vlečna priprava / priključna priprava: * vlečna priprava, višina nastavljiva za 300 mm * podaljšek vlečne priprave za 250 mm (na 2.250 mm) * 40-milimetrska priključna priprava ----Osvetlitev / električni sistem: * sistem za nadzor tlaka v pnevmatikah (RDÜ) * LED osvetlitev ----Splošni dodatni deli: * Jost podpirala spredaj * zunanja, pocinkana, zložljiva podpirala zadaj * plastična orodjarna škatla spredaj na desni strani, na čelni steni * stranski zaščitni odbijač * plastični blatniki ----Platforma za težke tovore: * 50 mm debela deska iz iglavcev * pred čelno steno je naprava za kasnejšo montažo zaklepnih mehanizmov za kontejnerje * vijakoma pritrjena čelna stena iz gladke pločevine * stranske stene iz jeklene pločevine – trapezno profilirane – z možnostjo odpiranja in pomočjo vzmetne naprave za dvižne stene * jeklena zadnja stena, ki jo je mogoče vstaviti med rampe – nosilec za uporabo, ko se ne uporablja, je nameščen na notranji strani čelne stene * zadnje vzdolžne nosilce je mogoče vijačiti ----Pripravki za pritrditev tovora: * perforiran zunanji okvir, približno 45 stopinj nagneten, z nosilnostjo 2 toni na vsakih 480 mm * možna vgradnja 3-tonske pritrdilne palice na vsakih 600 mm * v kotih spredaj in zadaj je nameščena 1 x 6,3 tonska pritrdilna palica * v čelni in zadnji prečki so različne luknje za pritrditev tovora (nosilnost 1,2 tone) ----Rampe: * enodelne mehanske rešetaste rampe z vzmetjo za eno osebo, približno 2.750 x 600 mm (lahko se združijo do 20 mm) * naklon spredaj zadaj približno 860 mm ----Barvanje: * pocinkano podvozje, vlečna priprava, čelna stena, rampe in zadnja stena * barva dvižne stene v RAL 9010, čista bela * barvanje stranskih sten v barvnem odtenku RAL je na voljo po dogovoru ----Informacije: * --Ojačana in certificirana nadgradnja po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in napak * Dostava: * dostavljivo od približno 41. tedna 2026

Stanje: novo, največja dovoljena obremenitev: 2.490 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.130 mm, širina tovornega prostora: 1.740 mm, višina nakladalnega prostora: 400 mm, skupna širina: 1.910 mm, skupna višina: 1.260 mm, Leto izdelave: 2026, * Humbaur HTK 3500.31 * Trestransporter * Novo vozilo * Letnik: 2026 * Največja dovoljena masa: 3500 kg * Nosilnost: 2550 kg * Zunanje mere: 4500 mm x 1900 mm x 1260 mm * Notranje mere: 3140 mm x 1750 mm x 350 mm Isdpfx Ansuknrgorsih * Električna črpalka v kombinaciji z rezervno ročno črpalko * Fuhrmann profilirane stranske stene iz pocinkane jeklene pločevine, v celoti odstranljive * V-priklopna vlečna prikolica, pocinkana v potopni kopeli * Nakladalna plošča iz jekla, izdelana v enem kosu * Šasi, nakladalna plošča in stranske stene pocinkane v potopni kopeli * Humbaur multifunkcijska osvetlitev * 13-polni priključek in vzvratna luč * Zadnja vrata, ki se gibljejo * Pritrdilne obroče nameščeni na dnu nakladalne plošče, vlečna sila 800 kg na pritrdilni obroč * Reža za deske kot priprava za aluminijaste deske za enostavno naknadno vgradnjo * Podporno kolo vključno z 19 % DDV POZOR !!!!! OBVEZNO PREBERITE !!!!! Navedene notranje mere so približne. Pri novih vozilih lahko nastanejo dodatni stroški za transport in dokumentacijo. Prodajalec ne odgovarja za napake, tipkarske napake in napake pri prenosu podatkov. Pridržujemo si pravico do sprememb in prodaje. Podatki so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Ta oglas služi samo kot predogled našega vozila in ni del pogodbe o prodaji! MOŽNOST VZEMA VOZILA V DELNIH PLAČILIH ZA PRAKTIČNO VSE !!! MOŽNOSTI IZMENJAVE IN PLAČILA NA OBROKE !!! Razstavni prostor: 58285 Gevelsberg, Am Sinnerhoop 17 Delovni čas: ponedeljek - petek od 8:30 do 17:00, sobota od 8:30 do 14:00 vedno več kot 500 novih in rabljenih prikolic na zalogi !!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Faks:

Stanje: novo, največja dovoljena obremenitev: 9.210 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.050 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 450 mm, skupna širina: 2.550 mm, skupna višina: 1.500 mm, Leto izdelave: 2026, * Humbaur Three-Way Tipper * HTK 10 50 24 * New Vehicle * Year of Manufacture: 2026 * GVW: 11,900 kg * Payload: 8,750 kg * Unladen Weight: 3,150 kg * Overall Dimensions: 7,170 x 2,550 x 1,500 mm * Platform Dimensions: 5,035 x 2,420 x 500 mm * Steel Sideboards: 500 mm high * Tyres: 235/75 R17.5 * Axles from renowned manufacturers * Maintenance-free parabolic suspension with load equalization * Tyres according to manufacturer’s selection * Tyre Pressure Monitoring System (TPMS) incl. Auto-Locate function * BRAKING SYSTEM * EBS braking system according to ECE regulations Iedpfxsuzfm Ds Anroih * 2 non-interchangeable coupling heads, red/yellow ISO 1728 * Spring-actuated parking brake * ELECTRICS * 24-volt lighting system with LED multi-chamber tail lights and flashing LED side marker lights * 15-pin connection plug for lighting * DRAWBAR * Galvanised drawbar with bolted towing eye Ø 40 mm * Coupling height steplessly adjustable via crank * CHASSIS FRAME * Heavy-duty welded chassis frame, hot-dip galvanised * Lockable intake shaft with plastic rollers for 2 optional ramp extensions integrated into the frame * SUPPORT * Reinforced 12 t gear support winch with load and fast gear * 2 telescopic folding supports, left and right at the rear of the vehicle * TIPPER PLATFORM * Platform floor made of 4 mm fine-grain steel * Reinforced platform frame, hot-dip galvanised * 4 ball tipping bearings with 2 non-interchangeable tipping bearing bolts * Laser-welded quality steel sideboards, 500 mm high * Sideboards foldable and removable to the sides and rear, swinging, with central locking, bolted * Complete galvanised finish of sideboards * Rear stakes galvanised and bolted * Tailboard with automatic tailboard locking * Solid steel front wall, galvanised, foldable forwards * Sideboard lifting springs on the sideboards * LOAD SECURING * 5 pairs of 6 t lashing rings recessed in the platform floor * HYDRAULICS * Hydraulic three-way tipper system controlled via towing vehicle (max. 200 bar) * Five-stage telescopic cylinder with stroke limitation and safety cables * Hydraulic quick coupling SVK BG3 as single-circuit connection * EQUIPMENT * Mudguards on front and rear axles with spray protection system * Side and rear contour marking * 2 wheel chocks with holder, space for single-line number plate NOTICE!!! PLEASE READ CAREFULLY!!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend a viewing and inspection to avoid misunderstandings regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are similar; may contain optional, chargeable accessories. The specified internal dimensions are approximate values. For new vehicles, additional freight and document costs may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! TRADE AND CASH PAYMENT POSSIBLE!!! Exhibition ground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: novo, največja dovoljena obremenitev: 6.900 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrical / Lighting: Iiodpfx Anjxyniwsrsh * RDÜ tire pressure monitoring system * 15-pin power connector * LED lighting * Flashing LED side marker lights ----Drawbar / Flanged towing eye: * Drawbar with 40 mm bolt-on towing eye (height adjustable in mm) ----General attachments: * Support winch at front * Spring-assisted square tube supports at rear with base plate, safety lock pins for various support heights * Enclosed steel fenders with splash guards * Enclosed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for drum securing at the ends of the support arms, as well as latching of the cable drum superstructure to the chassis via a centrally located claw lock * Motor-driven hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepwise offset * Preparation of steel construction and hydraulics for retrofitting an auxiliary engine ----Chassis: * Chassis made of torsion-resistant square sections and cross-members ----Hydraulics: * Hydraulic lines for supply and return ----Tyres: * 315/80 R 22.5 tires ----Painting: * Vehicle is hot-dip galvanized ----Info: * 2,690 kg curb weight * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering Iijdpfxepk D D Hs Anroh ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, skupna širina: 25.000 mm, skupna višina: 40.000 mm, Leto izdelave: 2014, Oprema: ABS, Za vprašanja v zvezi z vozilom je vam na voljo gospod Seidel (po telefonu). MÜLLER MITTELTAL SF32BM/BT betonska polprikolica Nadgradnja: Liebherr HTM 1004 10m³, osi BPW, bobnaste zavore, vzmetni akumulator, Wabco ABS, 1. os dvižna, zračno vzmetenje, dovoljena skupna masa: 32.000 kg, lastna masa: 6.510 kg, nosilnost: 25.490 kg, profil pnevmatik: 1. os 14-15mm, 2. os 10mm Po želji vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel vas z veseljem vodi po telefonu. Več informacij najdete na naši spletni strani. ... Napake, spremembe in vmesna prodaja pridržane!!! Isdpsyfu Sdjfx Anrsih = Dodatne informacije = Dovoljena skupna masa: 32.000 kg Za dodatne informacije se obrnite na gospoda Tobiasa Eberta.

Stanje: novo, največja dovoljena obremenitev: 15.970 kg, skupna masa: 21.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, ETÜ-TA-R 21,0: ----Zavore: * Wabco EBS-E (električni zavorni sistem) * Sistem za izpust zavor v sili za cilindrične zavorne čeljusti * Bobnaste zavore ----Os: * 2 x 11 ton Gigant osi ----Vzmetenje: * Zračno vzmetenje z dvižnim in spuščanjem ----Vlečna palica / prirobnična vlečna palica: * Vlečna palica s 50 mm prirobnično vlečno palico in nastavljiva vlečna palica po višini ----Osvetlitev / električna napeljava: * 15-polni električni vtič * LED luči 12/24 V * Sistem za nadzor tlaka v pnevmatikah (TPMS) ----Splošni dodatni deli: * Sprednja opora Jost * Zunanje zložljive opore zadaj * Plastična orodjarna škatla, približno 750 x 350 x 300 mm, nameščena na desni strani * Stranska zaščita * Plastični stranski blatniki ----Površina za tovor: * Pred sprednjo steno in zadnjim naklonom, priprava za naknadno namestitev zaklepov za pritrditev 20-palčnih kontejnerjev * Izvedba 21 ton celotne mase z ojačanim okvirjem in ojačanimi osmi * Paket za ojačitev za prevoz vrtalne naprave na šasiji * 50 mm iglasto-lesena talna obloga v vkleščeni izvedbi * Pred sprednjo steno priprava za naknadno namestitev zaklepov za pritrditev * Vijična sprednja stena iz gladke pločevine * Razdeljene stranske stene iz jeklene pločevine - trapezno profilirane - z možnostjo zlaganja s sredinskim zložljivim mehanizmom * Jeklena zadnja stena, ki se lahko potisne med rampami - držalo, ko ni v uporabi, na notranji strani pred sprednjo steno * Vijične zadnje stranske letve ----Pritrditev tovora: * Odprt zunanji okvir, približno 45 stopinj upognjen, z 2 tonami vlečne sile na vsakih 480 mm * Možnost vgradnje 3 ton varnostnih zank na vsakih 600 mm * Profifix pritrdilna letva na vzdolžni osi, na sredini, za možnost pritrditve do LC 3000 daN * Na vogalih, spredaj in zadaj, po 1 x 10 ton pritrdilne točke * Paket Lasi z 2 x 8 ton pritrdilnih točk na vsaki strani, potopljenih v zunanji okvir, v sprednji in zadnji nosilec različne vrtine za možnost pritrditve 1,2 tone ----Rampe: * Enodelna mehanična rešetasta ramapa z vzmetnim mehanizmom za delovanje z eno osebo, približno 3.000 x 620 mm (možnost potiskanja skupaj do 20 mm) * Naklon spredaj, približno 860 mm, šasija ----Višina nakladanja: * prazna približno 940 mm * natovorjena približno 910 mm ----Medosje / pnevmatike: * 1.810 mm * Pnevmatike: 235/75R17.5 ----Barvanje: * Barvanje stranskih sten v RAL 9010, čista bela barva * Vlečna palica, sprednja stena, zadnja vrata, zložljive opore in rampe pocinkane * Os, vzmeti, zračni rezervoar in opora pobarvane v črni barvi ----Informacije: * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja rezervirani ----Dobavni rok: Ijdpfxsq Dyu Ue Anrsih * Na voljo takoj, Egestorf

Stanje: novo, lastna masa: 3.960 kg, največja dovoljena obremenitev: 10.440 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.700 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55 R 19,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55 R 19,5, velikost zadnje pnevmatike: 385/55 R 19,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Trestransporter, dolžina tovorne površine približno 5.700 mm, stranske stene visoke 600 mm, pocinkane, + mrežasta nadstavba visoka 1.000 mm, višina tovorne površine ob obremenitvi približno 990 mm, 4 x privezne točke na dnu, vsaka do 5 ton, 8 x privezne točke na dnu, vsaka do 3 tone, ojačano podvozje s težiščem in hitrim mehanizmom spredaj, široke pnevmatike: 385/55 R 19,5, podvozje: vroče pocinkano, doplačilo za: aluminijaste rampe (približno 3.520 x 400 mm), nosilnost para 10 ton in 2 zložljivi oporni nogi zadaj, cena: 1.900 evrov, tiskarske napake, spremembe in napake so pridržane, ilustrativne slike, več podatkov na: !, Več podrobnosti: ! Iiedpfx Anoz Sl Risreh

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm Iijdpfx Anol Thy Rsrjh * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, lastna masa: 2.980 kg, največja dovoljena obremenitev: 8.920 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.110 mm, širina tovornega prostora: 2.430 mm, vzmetenje: jeklo, velikost pnevmatike: 245 / 70 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 245 / 70 R 17,5, velikost zadnje pnevmatike: 245 / 70 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Drei-Seiten-Kipper, Ladehöhe ca. 940 mm, Stirnwand klappbar zum Überladen, Zentralverriegelung für seitliche und hintere Bordwände, automatische Rückwandöffnung beim Rückwärtskippen, Seitenbordwände pendelnd und abklappbar, seitliche Bordwände mit Federentlastung, Brückenboden aus Feinkornstahl 4 mm, 8 starke Zurrösen im Boden versenkt, 5-stufiger hartverchromter Dreiseiten-Kippzylinder, Kippwinkel: nach hinten 50 Grad, seitlich 45 Grad, stufenlos höhenverstellbares Zugrohr, Rungen hinten steckbar, Getriebestützwinde mit Last- und Schnellgang vorne, Aufnahmeschacht für zwei Aluminium-Auffahrrampen im Fahrgestell integriert, abschließbarer Rampenschacht (Sichtschutz), Konturmarkierung nach ECE R 048 Vorschrift, Fahrzeug mit Tageszulassung. Druckfehler, Irrtümer und Änderungen vorbehalten, Musterbilder. Mehr Daten unter: !, More Details: ! Iiedjz R Tdnopfx Anrjh

Stanje: rabljeno, največja dovoljena obremenitev: 4.900 kg, skupna masa: 7.100 kg, konfiguracija osi: 1 os, prva registracija: 03/1993, * Prikolica Müller Mitteltal za boben kablov, enoosna * Datum prve registracije: 03/1993 * Hidravlično vrtljiv nadgradni del za boben kablov * Bruto teža: 7,1 t, Neto teža: 4,9 t * 12R 22,5 (10-12 mm) * Podporni mehanizem spredaj, vzmetno podprte štirikotne cevi zadaj s podno ploščo, varnostne pritrdilne bolte za različne višine podpore Isdpfx Anjz Ifagjrjih * Vlečna cev s 40 mm vlečno ujmo (z močno višinsko nastavitvijo z vijakom +/- 100 mm) * Pogon bobna s hidravličnim motorjem, ventili, cevmi in pogonsko gredjo * Gred bobna s približno 75 mm premera ter centriranjem in vrtljivimi konci * Za boben s premerom 800-3.000 mm x (1.700 mm širina med rokami bobna) * S sponko za pritrditev bobna na koncih nosilnih rok ---- * Naše odpiralno čas * Pon, Tor, Sre, Čet: 08:00 - 17:00, Pet: 08:00 - 15:00 * WhatsApp Zunaj odpiralnega časa smo vam na voljo po predhodnem dogovoru. Govorimo nemško, govorimo angleško, govorimo poljsko, govorimo francosko.

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak,  ,  Vozilo stranke, , --  Napake v tisku, napake in spremembe so pridržane, vzorčne fotografije --, Več podatkov na: !, Več podrobnosti: ! Iiodpfx Aez Rv U Ienroh

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: Iiodoxf Skvspfx Anreh * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors Iiedpfxjxf Skpe Anroh ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prostornina tovornega prostora: 10 m³, skupna dolžina: 7.500 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2012, Uporabni material: Beton Lastna masa: 6.530 kg Nosilnost: 25.470 kg Skupna dovoljena masa (zGG): 32.000 kg Iiodpfx Ansx Utq Soreh

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 3.720 kg, največja dovoljena obremenitev: 14.280 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/2025, naslednji pregled (TÜV): 06/2027, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, stanje pnevmatik: 90 odstotek, barva: siv, Oprema: ABS, osrednja vrtljiva plošča, Številka objekta: 31046 Ijdpfx Anjz Dvr Soroih Osnova BPW Bobnasta zavora Dvojne pnevmatike 235/75 R 17,5 Hidravlično-pnevmatsko napenjanje korita 2 para pritrdilnih obročev po predpisih UVV Pnevmatsko spuščajoča se vlečna vilica Dviganje/spuščanje ABS/EBS Ohišje za omrežni kabel Orodjarna škatla Delovna luč Duomatic Stranski zaščitni element Vroče pocinkano Vlečna ujma 40 mm Možnost najema oziroma financiranja na zahtevo!!

Stanje: rabljeno, največja dovoljena obremenitev: 38.230 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Müller-Mitteltal prikolica z nizko ležečo ploščadjo z vdolbinami za kolesa TS 3 RM ML 30,0, 2 višini nakladanja in rampe * Povečanje nosilnosti sedelne prikolice od 12 t na 18 t, vključno z vgrajeno dvojno sedelno pripravo: Druga pozicija sedelne priprave 2", sedelna priprava do vključno 2.750 mm. Največji radij obračanja zadaj približno 2.400 mm v prostem prostoru (priporočljiv minimalni prosti prostor 150 mm). Največji radij obračanja naprej 1.480 mm oz. 1.570 mm z rezervnim kolesom. Opomba: Zadostno razdaljo do vlečne enote mora zagotoviti stranka. * Izpodbujevalne komponente za vdolbinami za kolesa spredaj in zadaj spodaj (globina 205 mm). 6 kosov, vključno s ploščami za vdolbine za kolesa zadaj. Držalo za plošče kot vstavni žepi v skladu s kodo 09.112, aluminijasta tlačna posoda za zračni sistem namesto jeklene posode * Nadzorna enota Smartboard, nameščena na prikolici kot informacijsko orodje z tlačnimi senzorji, izključno za prikaz skupne nosilnosti osi. Možnost prikaza na nadzorni enoti ali v tovornjaku preko sistema zračnega vzmetenja EBS (odvisno od proizvajalca tovornjaka) * ?SP-kombinirani paket: orodjna omara z 45° robovi iz pocinkane jeklene pločevine, dodatno prašno lakirana v barvi RAL 9006 belo-aluminijasto, na platformi prikolice Š=2.480 x V=500 mm z pokrovom, stranska vrata in poševni robovi. Vključno z aluminijastimi stranskimi stenami, ki se odpirajo proti platformi prikolice (višina 500 mm), aluminijasto zadnjo steno (višina 150 mm), aluminijaste bočne stene, pobarvane znotraj in zunaj v barvi RAL 9006 belo-aluminijasto. Vključno z zadnjimi oporniki, ki se odpirajo in odstranjujejo, pocinkani (brez zaključne barve). Vključno z vijačeno nadgradnjo. Dolžina čelne nosilke do poševnine 3.935 mm, največji radij obračanja spredaj, brez dodatnega kolesa, pri poševnem merjenju 2.450 mm oz. 2.750 mm, približno 1.750 oz. približno 1.480 mm. * 2 košti pritrdilnih naprav za kontejner, vgrajenih v čelno nosilko * 3 vstavni žepi pod platformo prikolice za shranjevanje aluminijastih rampt ali lesenih plošč za pokrivanje vdolbin za kolesa * Odpirajoči se izteg / izpodbujevalni drog (pocinkan) in lesene plošče za širitev, vključno (ne na zadnji poševnini), držalo za plošče na platformi prikolice (največja širina tovorja je 2.500 mm) * Druga LED-pozicijska luč na sprednji in zadnji strani varnostnega paketa (dvojna razsvetljava), samo v povezavi z varnostnim paketom * 2 LED-luči za vzvratno vožnjo na zadnji strani prikolice, vklopljeni z vzvratno prestavo (primerno za 12 V in 24 V), največ 2 dodatni luči Iijdpey R Ipujfx Anreh * Vtičnica z 7 poli na zadnji strani, priključena za osvetlitev presežne širine vozila z zadnjo lučjo (58 R) in maso * Gumijasta prevleka na dostopni rampi na levi in desni strani (približno 860 mm dolžine), 190 07644, gumijasta trakov, na notranji plošči enodelne rampe * Centralni sistem mazanja, popolnoma avtomatski, s črpalko (24 V), rezervoarjem za maščobo in integriranim nadzorom prikolice, brez priključka na rampe (pri krmiljenju: vključno s priključkom razdelilnika na platformi prikolice), Opomba: Možno samo pri vlečnih vozilih z 24-voltno električno napravo! Med prodajo in napake so izrecno izključene! Prodaja samo v skladu z našimi splošnimi pogoji poslovanja. Pomembno opozorilo – pomembne informacije: Kljub natančni pregledu vseh podrobnosti v naši ponudbi se lahko zgodi, da se vključi napaka. Delno so te posledica napak pri prenosu podatkov v sistemih različnih ponudnikov platform. Zato želimo opozoriti, da

Stanje: rabljeno, lastna masa: 4.160 kg, največja dovoljena obremenitev: 13.840 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2026, dolžina tovornega prostora: 5.010 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, Oprema: ABS, Humbaur HTK195024 gravel three-way tipper | Rigid drawbar | Frame hot-dip galvanized | Hydraulic connections | Loading area dimensions: L: 5.0m W: 2.42m H: 0.80m | Drop sides made of Hardox 800x2.5mm, pendulum-mounted | Air suspension | Floor made of 4mm high-wear-resistant HB450 steel | Superstructure KTL and powder-coated, RAL9006 white aluminium | 6 pairs of lashing rings, each with 3000kg lashing point | SAF axle with drum brake | Gross weight: 18,000 kg, payload: 13,720 kg | 50mm towing eye | Tires: 385/65R22.5 | Operating voltage 24V | Subject to errors, input mistakes, and prior sale. Iiedpsy Snzaefx Anreh