Meusburger Mpj-3 - Jumbo Plattform Radmulden Nr.: 179 nakup rabljenega (40.596)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014200, lastna masa: 6.700 kg, največja dovoljena obremenitev: 28.300 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, barva: sivo-črna, Chassis, semi-trailer, forwarding version Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame slightly chamfered, new design with "Load-Lock profile" for securing strap hooks 24 t, 2-speed landing gear, single-sided operation, with straight base, without telescopic adjustment Free landing leg corner dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards in front of and behind each axle Spray flaps in front of the 1st axle and behind each axle with anti-spray, according to EC Cjdoza A Txopfx Apbohb 1 lockable plastic toolbox, w=600 / h=425 / d=460 mm (lock not included) Axles + Suspension SAF drum brake axles "Axles/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated by "3x braking" (start assist is active up to a 30% overload on the axle and up to a maximum speed of 25 km/h) Axle lift below recommended driving height, therefore no warranty for tyre damage Brake system 2-line compressed-air brake system Colour-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! With raise & lower valve Vehicle dynamic stability system Wheels and tyres 235/75 R17.5, brand according to manufacturer's choice Steel rims, factory silver Electrics 24 V, multi-chamber lamps, yellow LED side marker lamps 2 white marker lamps at the front 2 white/red lane marker lamps at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connecting cable Floor Phenolic plywood approx. 30 mm thick, for high point load capacity, suitable for forklift axle load up to max. 5,600 kg Front wall / front corner posts 25 mm aluminium hollow section, 1,350 mm high, front corner posts in steel, volume design Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminium

Stanje: rabljeno, številka stroja/vozila: W09STLB3NCEN1xxxx, Leto izdelave: 2012, Prosimo, navedite referenčno številko ob povpraševanju: 23645 Specifikacije: Model 2012 Bo pred prodajo pridobil EU-homologacijo EU-homologacija do: 28.03.26 3-osni Pnevmatike (glej slike) Zložljive stranske razširitve Vezne zanke Zadnje luči Pripravljen za dostavo Cjdpfxjzqm Hpe Apbohb Opis: Na voljo imamo HDR jumbo prikolico s tremi osmi iz leta 2012. Pred prodajo bo opravljena EU-homologacija in bi morala delovati po pričakovanjih. Lahko so prisotne kozmetične poškodbe. Pripravljena za dostavo. TÜV: Ne EU-homologacija do: 28.03.2026 Lastna teža: 8910 kg Skupna teža: 50000 kg Nosilnost: 41090 kg Širina: 254 cm Dolžina: 1377 cm Model: HDR 3-osna jumbo prikolica = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: rabljeno, Leto izdelave: 2019, število postelj: 4, prva registracija: 03/2019, naslednji pregled (TÜV): 07/2027, skupna dolžina: 7.500 mm, skupna širina: 2.320 mm, skupna višina: 2.720 mm, konfiguracija osi: 1 os, skupna masa: 1.500 kg, Oprema: kopalnica, parkirni grelec, * Knaus Sport 540 UE * 1200 kg prazna teža in 1500 kg največja dovoljena masa, 300 kg nosilnost * v sprednjem delu velika okrogla sedežna skupina za štiri osebe, ki se lahko preuredi v posteljo za dve osebi Cjdezk S Ryepfx Apbehb * v zadnjem delu prijetne ločene postelje * kuhinjski blok z nerjavečim pomivalnim koritom * hladilnik z zamrzovalnikom * plinski štedilnik s tremi gorilniki in stekleno pokrovko * plinska peč Truma z ventilatorjem za kroženje zraka * sanitarna enota s kasetnim straniščem in umivalnikom * rezervoar za vodo, približno 50 litrov * velika strešna odprtina Heki * klimatska naprava z daljinskim upravljalnikom * TV z daljinskim upravljalnikom * pogon za premikanje z daljinskim upravljalnikom * šotor je priložen kot dodatek * rabljeni šotori, pogoni, antene, televizorji in druga dodatna oprema/dodatki niso del kupoprodajne pogodbe, kar pomeni, da za njih ne velja garancija ali jamstvo. Vsa oprema bo ob nakupu demonstrirana, vključno z navodili za uporabo plinske naprave. Glavni pregled (Dekra, TÜV Nord) in pregled plinske naprave sta izvedena. Z veseljem bomo prevzeli vaš »stari« avtodom. Sprejemamo avtodome vseh znamk!! Odprti smo 6 dni v tednu. Po želji vam uredimo prevozni registrski list (prosimo, pokličite vnaprej). Druge ugodne in dobro vzdrževane avtodome najdete na . Na naši spletni strani lahko izveste več o našem podjetju. Odprti smo vsak dan od 09.00 do 18.00 ure, ob sobotah od 10.00 do 14.00 ure. Veselimo se vašega obiska! Nove modele Niewiadow za leto 2026 so že na voljo. Pridi in si jih oglej. Vredno je! Naša lokacija v Kollerupholz 1, 24991 Großsolt, ponuja veliko izbiro novih in rabljenih avtodomov. Poleg tega imamo tudi veliko trgovino s kamp opremo. Naša delavnica izvaja glavne preglede (Dekra) in preglede plinskih naprav neposredno v naših prostorih, kot tudi vse potrebne popravke avtodoma. Pridržujemo si pravico do sprememb in napak. ----Rabljeni šotori, pogoni, antene, televizorji in druga dodatna oprema/dodatki niso del kupoprodajne pogodbe, kar pomeni, da za njih ne velja garancija ali jamstvo.

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side) * Rear axle as self-steering axle with electro-pneumatic steering lock * Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting/lowering device and Ride-to-Return valve ----Electrics / Lighting: * Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights * 7-pin socket at rear for extended length lighting * Side marker lights with indicator signal control * Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side) Chedeq Euakspfx Apbsb ----General equipment: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connecting cables from truck to semi-trailer ----Low loader deck: * 2nd king pin position * Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks * Tear plate above the axles * 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor) * 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings ----Load securing (LaSi package): Fifth wheel platform: * Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam) Low loader platform: * 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope) * 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well) ----Excavator arm recess: * Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33903000364, lastna masa: 6.120 kg, največja dovoljena obremenitev: 28.880 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- build tolerance Overall length approx.: 13,800 mm Max. overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low-bed length approx.: 9,600 mm Loading height in low-bed, loaded approx.: 900 mm Internal width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis semi-trailer for haulage company Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping at the beginning of the low-bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly sloped new outer frame design with "Load-Lock profile" for securing lashing straps "Patented Load-Lock-Cross" for attaching lashing straps, mounted on the crossmember underneath the outer frame 24 t two-speed landing gear, single-sided operation, with straight lower section, without load equalizer Free landing leg corner dimension or free rear swiveling radius of approx. 1,920 mm Side underrun protection: aluminum Rear underrun protection: steel Quarter shell mudguards 9 pairs of lashing/ stanchion rails recessed across the floor up to the main frame, approx. 100 mm high. With 20 mm round steel bars top and bottom, spacing between bars approx. 60 mm. Bottom with angle plate as closure, half open downwards. For securing and inserting stanchions 80 x 80 mm (3 pairs in gooseneck, 6 pairs in low-bed area) 3 pairs of stake pockets recessed in the outer frame, internal dimension approx. 72 x 42 mm Axles & Suspension: Drum brake axles as per manufacturer’s choice "Laser-measured axles/chassis" for reduced tire and fuel consumption Air suspension Brake system: 2-line compressed air braking system Color-coded piping for easy service Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS electronic braking system, EBS socket at front, no connecting cable Note: The trailer must only be towed by tractor units that guarantee the effectiveness of the ABS! With lift and lower valve Vehicle stability system Wheels and Tires: 235/75 R17.5, manufacturer at the buyer’s discretion Steel rims, factory silver Electrics: 24 volt, multi-chamber lights, yellow LED side lighting (recessed inward) 2 white position lights front 2 white/red lane marker lights rear 2 x 7-pin foolproof sockets at the front, no connecting cable 1 additional LED work light at rear, switched via reverse light Floor: Approximately 30 mm thick anti-slip plywood, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / front corner stanchions: 25 mm aluminum hollow profile, 1,350 mm high Country of registration / plates: Germany Inspection and certificate in Bosnia 24/7 service hotline Csdpoy Slhqjfx Apbohb Prepared for single-row license plate holder Contour marking with reflective tape in accordance with ECE R 048, white on the sides, red at the rear Warning sign according to ECE 70 Painting: Frame: hot-dip galvanized incl. passivation “15-year guarantee against corrosion perforation” Front corner pillars: hot-dip galvanized Front wa

Stanje: novo, Special offer! Stock vehicle from 2022! Never registered! 9929875 Chjdpey Nbx Hofx Apbob Brian James Trailers Connect Universal Trailer Tridem with 10-inch wheels The versatile multi-purpose trailer for commercial goods and vehicles of all kinds. Every available option can be flexibly added or removed, enabling you to tailor your Connect precisely to almost any application. Special terms for a stock vehicle from model year 2022 without first registration Manufacturer: Brian James Trailers Connect 476-5522-35-3-10 Loading area dimensions: 5500 x 2290 mm (L.W.H.) Permissible total weight: 3,500 kg Unladen weight: approx. 925 kg Payload: approx. 2,575 kg (payload may vary depending on equipment and configuration) Wheel size: 10 inch Side panels in black Spare wheel mounted on the drawbar (with locking device) Robust mesh hooks under the loading deck Numerous lashing points punched directly into the frame allow for professional load securing Lockable coupling head Heavy-duty jockey wheel Extremely robust chassis made entirely of galvanized steel 18 mm phenolic-coated plywood floor with anti-slip surface Integrated ramp channels for easy retrofitting of loading ramps LED lighting Vehicle documents included Possible options and accessories for this trailer: Wheel shock absorbers incl. 100 km/h certification Spare wheel incl. bracket Anti-theft device Registration of your new trailer with the vehicle registration office We will be happy to show you how to finance your new trailer in convenient monthly installments and provide you with a customized financing offer. We have more than 2,000 trailers permanently in stock. You can find many of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Illustrations may show accessories not included in the standard scope of delivery. Due to continuous development, illustrations and technical data may vary slightly. Errors and changes excepted!

Stanje: novo, Brian James Trailers Connect Universal Trailer Tridem The adaptable multifunctional trailer for commercial goods and vehicles of all kinds. Every available option can be flexibly fitted or removed, allowing your Connect to be tailored to almost any application. Manufacturer: Brian James Trailers Model: Connect 476-5522-35-3-12 Platform dimensions: 5500 x 2290 mm (LxWxH) Permissible total weight: 3,500 kg Unladen weight: approx. 925 kg Payload: approx. 2,575 kg (payload figures may vary depending on equipment and configuration) Wheel size: 12 inch Black side panels Spare wheel mounted on the drawbar (with lockable bracket) Heavy-duty mesh hooks mounted underneath the platform Numerous lashing points stamped directly into the chassis enable professional load securing Lockable coupling head Heavy-duty jockey wheel Extremely robust, fully galvanized steel chassis 18 mm phenolic plywood floor with anti-slip surface Integrated ramp channels for easy retrofitting of loading ramps LED lighting Incl. vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certificate Spare wheel incl. holder Anti-theft device Cedjy Nbwvepfx Apbehb Registration of your new trailer at the vehicle licensing authority

Stanje: novo, Special price! Stock vehicle from 2022! No initial registration! Machine and universal transporter - 3-axle Manufacturer: Variant Model: 3500 U6 Internal load area dimensions: 6200 x 2100 x 300 mm (LxWxH) Overall dimensions: 6730 x 2200 x 1590 mm (LxWxH) Permissible total weight: 3500 kg Unladen weight: approx. 1140 kg Payload: 2360 kg (Payload may vary depending on configuration and design) Unladen weight: 1140 kg Wheel size: 13-inch tyres Chedsy I T I Rjpfx Apbeb 3 axles Aluminium drop sides with hot-dip galvanized, removable corner posts Drop sides foldable on all four sides Long sides are two-part, centre posts removable Loading height: approx. 630 mm Hydraulically tiltable load area Robust 900 mm access ramp with gas struts Ramp approach angle: 10° 8 internal lashing points Automatic jockey wheel 13-pin connector Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Tarpaulin in various heights and colours 600 mm high mesh extension Cable winch Spare wheel incl. holder Anti-theft device Registration of your new trailer with the vehicle registration office

Stanje: novo, Platformni prikolica kao troosovinska Chodpfx Aoy I Rdiopbeb

Stanje: novo, Hochlader mit 100 km/h Abnahme und Auffahrschienen - Plateauanhänger - Hersteller: Eduard Typ: 3318-3-PMV-1863 Innenmaße: ca. 3300 X 1800 mm L.B.H. Außenmaße: ca. 4830 x 1860 mm L.B. Zul. Gesamtgewicht: 1800 kg Eigengewicht: ca. 436 kg Nutzlast: ca. 1364 kg (Nutzlastangaben können je nach Ausstattung und Konstruktion abweichen) Ladehöhe: 630 mm Stoßdämpfer inkl. 100 km/h Abnahme Stahlrahmen feuerverzinkt Spannverschlüsse Schienenschacht unter der Ladefläche Einhängbare Auffahrschienen Cedpoy I Ntisfx Apbehb 2 Stützen hinten Handseilwinde 12 Verzurrösen im Bodenrahmenprofil, 800 daN (kg) 13-poliger Stecker Automatikstützrad Begrenzungsleuchten Keile inkl. Halter Inkl. Fahrzeugpapiere Mögliche Optionen und Zubehör für diesen Anhänger: Reserverad inkl. Halter Diebstahlsicherung Zulassung Ihres neuen Anhängers beim Straßenverkehrsamt

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Brand new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Locking position for extension: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tons - Total width: 2,550 mm - Technical gross weight (80 km/h): 48,000 kg - Technical gross weight (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2x fixed axles at the front, 1x trailing steering axle at the rear - Air suspension with load gauge - Wabco braking system - Tyres: 12 units, size 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions, extendable up to 300 mm - Telescopic rear stabilizer with 50 ton capacity - Rear mechanical folding supports with 45 ton capacity - Wheel recesses dimensions: 420 mm deep, 800 mm wide - Suitable for tyre diameter up to 1,800 mm Codpfx Apomtwypjbshb RAMP: - Ramp receptacles at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, Code XL certified ACCESSORIES: - 1x plastic toolbox - Stake box with capacity for 18 stakes - 1x rotating beacon - Wheel recess bridge for closing the recesses Chassis colour: RAL 3020 Traffic Red For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 37.581 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 15.850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Factory-new Kässbohrer Mega Tele HD platform semi-trailer with wheel recesses TECHNICAL INFORMATION: - Fifth wheel height: 950 mm - Overall length: 13,535 mm - Gooseneck length: 4,285 mm - Platform length: 8,950 mm - Extension: 6,900 mm - Extension locking position: 500 mm - Gooseneck height: 120 mm - Platform height (loaded): 1,040 mm - Wheelbase: 7,700 mm - Axle load: 10 tonnes - Overall width: 2,550 mm - Gross vehicle weight rating (80 km/h): 48,000 kg - Gross vehicle weight rating (60 km/h): 50,000 kg - Unladen weight: 10,419 kg RUNNING GEAR: - BPW axles with air suspension and drum brakes - 2 rigid front axles, 1 self-steering rear axle - Air suspension incl. load gauge - Wabco braking system - Tyres: 12 x 245/70 R17.5 CHASSIS: - Chassis made of high-quality, high-strength S700 MC steel - 30 mm thick hardwood floor - 9x2 side extensions extendable up to 300 mm - Telescopic rear support winder, 50-ton capacity - Mechanically folding supports at rear, 45-ton capacity - Wheel recesses: 420 mm deep, 800 mm wide; suitable for tyre diameter up to 1,800 mm RAMPS: - Ramp mounts at the rear of the vehicle LOAD SECURING: - Lashing rings - Stake pockets - Stakes - Container locks suitable for 1x20 ft, 1x40 ft, or 1x45 ft + 4 twist locks - Front wall made of steel, height 1,500 mm, with Code-XL certificate ACCESSORIES: - 1x plastic toolbox - Stake box for 18 stakes - 1x beacon Cjdpfx Apotn Hlmjbshb - Wheel recess bridge to close the wheel recesses - Ramp box Chassis colour: Nova grey For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 26.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, WIESE 3-axle low-loader with ramps and wheel recesses ? NEW Availability approx. 4 months from order ---- Vehicle data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross weight: 39,000 kg * Fifth-wheel load: 12,000 kg * Aggregate axle load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS ---- Dimensions * Load bed length: 13,450 mm * Low-bed length: approx. 9,550 mm Cedpfx Aoyuq Igepbehb * Fifth-wheel section: approx. 3,640 mm * External width: 2,550 mm * Bed height low-bed: approx. 920 mm * Fifth-wheel height: approx. 1,250 mm ---- Equipment * 3 x SAF axles (9 t) with air suspension * 1st axle with lift function * 3rd axle with trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2 x 7-pin sockets ---- Bodywork * Sturdy steel frame * 28 mm hardwood floor / Omega floor * 13 pairs of lashing rings 8,000 kg * Additional lashing points 5,000 daN * 2 pairs of wheel recesses * Digger arm recess * Aluminium plug-in side boards on the raised deck * Toolbox at the front ---- Ramps * 2 x aluminium drive-on ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting system * Sideways adjustable ---- Miscellaneous * Warning boards for overwidth up to 3 m * Contour marking in accordance with ECE-R48 * Technical documentation and TÜV certificate For further information, we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW axles * Start assist for shunting purposes on the first axle, activated via EBS (without truck-side installation) * Last axle is a trailing steering axle with electro-pneumatic steering lock Chedpfeykx Nkox Apbsb * Locking of the trailing axle for maneuvering purposes from the driver’s cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lift and lowering function as well as RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lamps with indicator function * Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support legs at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Mechanically adjustable warning sign packages front and rear * Swing arm as a carrier for connecting lines from truck to semi-trailer ----Low Loader Platform: * 2nd king pin position * Gooseneck platform with 45° chamfered front corners and front-mounted toolbox made of galvanized, powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm aluminum side boards (in desired RAL color) foldable and removable along the gooseneck platform * Rear wall, insertable, height 150 mm * Rear incline on the gooseneck platform to the low-bed approx. 700 mm long with checker plate covering and at the end a perforated strip for attaching aluminum approach ramps * Gooseneck platform with 50 mm clamped wooden planks, low-bed platform with 60 mm clamped wooden planks * Tread plate over axles * 9 mechanical extension panels to a total width of 3 m, not included in the rear incline (extension planks available with closed transverse stowage compartment under load floor) * Preparation for 3 storage recesses under the gooseneck platform for optional storage of aluminum approach ramps or planks for covering wheel recesses * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Gooseneck platform: * Perforated outer frame, 45° angled, with hole pattern for lashing devices (2 t lashing capacity per point with a minimum spacing of 480 mm) * 3 x 13.4 t lashing rings recessed into the floor per side (1 x on gooseneck platform, 1 x on longitudinal frame after the cranking, 1 x above middle axle next to longitudinal frame) Low-bed platform: * 3 x 13.4 t lashing rings per side at the outer frame (1 x start of gooseneck cranking, 1 x start of approach ramp, 1 x end of approach ramp) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side screwed to outer frames of the wheel recesses (2 at front wheel recess, 1 at rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from end of last rigid axle over the steering axle to the end cross member, continuous with internal reinforcing profile approx. W = 770 mm x T rear

Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side) * Last axle as self-steering trailing axle with electro-pneumatic lock * Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side) ----Suspension: * Air suspension with lifting and lowering system, including RtR valve ----Electrics / Lighting: * Smart-Board infotool mounted on trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * 2 additional LED reversing lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Side underrun protection * Landing gear at front, swing supports at rear of the chassis * Straight steel fenders * Spare wheel carrier in front of front wall crossmember (spare wheel not included) * Mechanically adjustable warning sign packages at front and rear * Swing arm as carrier for connection lines from truck to trailer ----Low Loader Deck: * 2nd kingpin position * Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform * Removable 150 mm high rear wall * Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps * Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks * Tread plate above axles * 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area) * Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers * Preparation for container locks on the gooseneck ----Load Securing (LaSi Package): Saddle Platform: * Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm) * 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam) Low-bed Deck: * 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp) * 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle) * 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well) ----Digger Arm Rest: Chedpfx Apjykx Nqebeb * Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear

Stanje: rabljeno, največja dovoljena obremenitev: 14.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2007, naslednji pregled (TÜV): 11/2026, dolžina tovornega prostora: 10.350 mm, širina tovornega prostora: 2.400 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Skupna dolžina: 12.000 mm Dolžina nakladanja: pribl. 10.350 mm Širina: 2.550 mm / Širina nakladanja pribl. 2.400 mm Višina nakladanja: pribl. 850 mm Dodatne informacije: - 3. os prisilno vodena - Notranja nakladalna višina pribl. 3.150 mm - Dvojne pnevmatike 215/75R17,5 - BPW osi - Zračno vzmetenje - Drsna cerada Codpfszd Narex Apbjhb Vozilo je lahko polepljeno z oglaševanjem, označeno in/ali z ostanki napisov. Na voljo več kosov

Stanje: rabljeno, Leto izdelave: 2019, število postelj: 4, prva registracija: 07/2019, skupna dolžina: 6.610 mm, skupna širina: 2.320 mm, skupna višina: 2.570 mm, konfiguracija osi: 1 os, skupna masa: 1.500 kg, Oprema: kopalnica, parkirni grelec, * Weinsberg Caraone 450 FU * Unladen weight 1,000 kg and gross weight 1,500 kg * Rear round seating group for four people, convertible to a bed for two persons * French bed at the front * Kitchen area with stainless steel sink * Refrigerator with freezer compartment * Gas cooker with three burners and glass cover * Truma gas heating * Bathroom with cassette toilet and external hand basin Cjdpfxoucchlo Apbohb * Shower * Anti-sway coupling from Alko * Side storage hatch * Large Heki roof vent * Used awnings, movers, antennas, TV, and other accessories/extras are not included in the purchase contract, meaning there is no warranty or guarantee for them. All appliances are demonstrated upon purchase, including instruction on the gas system. Full inspection (Dekra) and gas check are new. We are happy to take your 'old' caravan in part exchange. Trade-in of all makes! We are open six days a week for you. On request, we can arrange a temporary license plate for you (please call in advance). More affordable and well-maintained caravans available at . Learn more about our company on our homepage. Open daily from 09:00 to 18:00, Saturdays from 10:00 to 14:00. We look forward to your visit! The new 2026 Niewiadow models have arrived. Drop by - it’s worth it! Our location at Kollerupholz 1, 24991 Großsolt, offers a large selection of new vehicles and used caravans. In addition, we have a huge camping shop. Our workshop provides full inspections (Dekra) and gas checks directly on-site, as well as all caravan repairs. Subject to errors and prior sale.

Stanje: rabljeno, Leto izdelave: 2009, število postelj: 6, prva registracija: 03/2009, skupna dolžina: 7.400 mm, skupna širina: 2.300 mm, skupna višina: 2.570 mm, konfiguracija osi: 1 os, skupna masa: 1.600 kg, Oprema: kopalnica, parkirni grelec, * Hobby Excellent 540 KMFe * 1390 kg unladen weight and 1600 kg gross vehicle weight * Front area with French bed Csdpfx Asrm N Igopbehb * Central seating group for four, convertible into a double bed; small sofa opposite * Rear section with bunk beds * AL-KO anti-sway coupling * Large Heki roof hatch * Drawbar-mounted bicycle rack, fully foldable * Kitchen block opposite the seating area, with 85-litre fridge including freezer compartment * Stainless steel sink and three-burner gas cooker with glass cover * Washroom with cassette toilet, hand basin, and shower * Fresh water tank approx. 50 litres * Service hatch * Used awnings, movers, antennas, televisions, and other accessories/extras are not part of the sales contract; therefore, no guarantee or warranty applies. All appliances will be demonstrated at the time of purchase, including operating instructions for the gas system. Main inspection (DEKRA) and gas inspection NEW. We are happy to take your trade-in caravan, regardless of make! We are open 6 days a week. On request, we can arrange a transit license plate (please call in advance). More competitively priced, well-maintained caravans available on our website. Find out more about our company online. Open daily from 09:00 – 18:00, Saturdays 10:00 – 14:00. We look forward to your visit! The new 2026 models from Niewiadow have arrived. Stop by—it's worth it! Our Kollerupholz 1, 24991 Großsolt location offers a wide selection of new and used caravans, plus an extensive camping shop. Our workshop provides on-site main inspections (DEKRA), gas checks, and all caravan repairs. Errors and prior sale excepted.

Stanje: rabljeno, Leto izdelave: 2007, število postelj: 4, prva registracija: 05/2007, skupna dolžina: 7.310 mm, skupna širina: 2.340 mm, skupna višina: 2.540 mm, konfiguracija osi: 1 os, skupna masa: 1.500 kg, Oprema: kopalnica, parkirni grelec, * Dethleffs Beduin Emotion 500 DB Codpfx Ajxyn Rzspbohb * 1,220 kg unladen weight and 1,500 kg gross weight * Two external storage compartments * Transverse front bed for two persons * Rear dinette converts into a round seating area for four, transformable into an additional bed for two * Central kitchenette with 85-litre refrigerator including large freezer compartment * Truma gas heating system with circulated air blower * Truma water heater for comfortably warm water * Stainless steel sink and three-burner gas hob with glass cover * Washroom with cassette toilet and hand basin * Fresh water tank approx. 40 litres * Awning included as a complimentary accessory * Used awnings, movers, antennas, TVs, and other accessories/extras are not part of the purchase contract, i.e., there is no warranty or guarantee on these items. All appliances will be demonstrated upon purchase, including instruction on the gas system. Main inspection (Dekra, TÜV Nord) and gas safety check will be conducted NEW. We are happy to take your "old" caravan in part exchange. We accept trade-ins of all makes! We are open for you six days a week. On request, we can arrange a temporary registration plate – please call in advance. More affordable, well-maintained caravans can be found on our website. Find out more about our company on our homepage. Open daily from 09:00 to 18:00, Saturday 10:00 to 14:00. We look forward to your visit! The new 2026 models from Niewiadow have arrived. Drop by – it’s worth your while! Our location at Kollerupholz 1 in 24991 Großsolt offers a wide selection of new and used caravans. In addition, we have a large camping accessories shop. Our workshop provides in-house main inspections (Dekra) and gas system checks, as well as all repairs related to caravans. Errors and prior sale reserved.

Stanje: rabljeno, Leto izdelave: 2009, število postelj: 4, prva registracija: 03/2009, skupna dolžina: 7.200 mm, skupna širina: 2.300 mm, skupna višina: 2.500 mm, konfiguracija osi: 1 os, skupna masa: 1.500 kg, Oprema: kopalnica, parkirni grelec, * Hobby Excellent 560 UFe * Empty weight 1,213 kg and total weight 1,500 kg * French bed in the front section * Rear round seating area for four, convertible into a double bed * Winterhoff anti-sway hitch * Central kitchenette with large 85-litre fridge and freezer compartment * Stainless steel sink and three-burner gas hob with glass cover * Bathroom with cassette toilet and external wash basin * Fresh water tank approx. 60 litres * Service hatch Cjdporz Ihzofx Apbohb * Roof railing * Large Heki rooflight * Used awnings, movers, antennas, TV, and other accessories/extras are not part of the purchase contract – therefore, no guarantee or warranty applies. All appliances are demonstrated upon purchase, including instruction in the gas system. Main inspection (Dekra) and gas inspection are NEW. We are happy to take your 'old' caravan in part exchange – trade-in of all makes! We are open 6 days a week. Upon request, we can arrange transit number plates for you (please call in advance). More affordable and well-maintained caravans are available on our website, where you’ll also find more information about our company. Open daily from 09:00 to 18:00, Saturdays 10:00 to 14:00. We look forward to your visit! The new 2026 Niewiadow models have arrived – stop by, it’s worth it! Our location at Kollerupholz 1, 24991 Großsolt, offers a wide range of new and used caravans. In addition, we have a large camping shop. Our workshop offers on-site main inspections (Dekra) and gas check services, as well as all caravan repairs. Subject to error and prior sale.

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0: Csdotpta Djpfx Apbehb ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation) * Last axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function as well as RtR valve ----Electrics / Lighting: * Smart Board mounted on trailer as info tool with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 extra LED reversing lights * 7-pin socket at the rear for additional length lighting * Side marker lights with indicator activation * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General attachments: * Side underrun protection * Landing gears at the front and swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder in front of the headboard crossmember (without spare wheel) * Mechanically adjustable warning sign packages at the front and rear * Swivel arm as carrier for connection cables from truck to semi-trailer ----Lowbed platform: * Second kingpin position * Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid * Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable * Rear wall -150 mm- high plug-in * Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps * Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tread plate over the axles * 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area) * 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering ----Load securing (LaSi-package): Fifth wheel platform: * Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member) Lowbed platform: * 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle) * 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well) ----Excavator arm rest: * Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm * 2 x 6.4 t lashing rings per side in the exca

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls Chedpfetvfkfjx Apbjb - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: rabljeno, lastna masa: 11.950 kg, največja dovoljena obremenitev: 37.550 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-piece steel ramps: - One pair of galvanized two-piece steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load per pair: 30,000 kg Loading platform: - Loading area with rear chamfer of approx. 1,000 mm x 8° - 5 pairs of externally foldable lashing rings - 3 pairs of externally foldable lashing rings - 1 pair of flat lashing rings at the front of the loading area - Approx. 48 mm thick hardwood flooring; tread plate surface above the axles Axles and wheels: - BPW axles and suspension; two axles fixed, one self-steering axle - Air suspension with raise/lower valve - Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually - Tyres: 235/75 R17.5 3PMSF Accessories included: - 1 spare wheel with holder - TPMS tyre pressure monitoring system in accordance with ECE R 141 - 2" kingpin - One galvanized steel bulkhead - Yellow-red air couplings at the galvanized front connector rail - 4 wheel chocks with holders - Recess at the rear of the gooseneck for ALU access ramps - 3 heights of aluminum planks - Galvanized folding supports under the chamfer of the loading platform - A holder for a revolving beacon at the rear of the trailer - Height-adjustable tarpaulin structure (3,960 mm) - Galvanized front wall with a tensioning mechanism for the sliding curtain - Height adjustment possible by approx. 400 mm - "EDSCHA" branded roof, forward-slidable on aluminum roof beam profiles, bolted to front and rear walls - 3 pairs of sliding stanchions on the loading area - Structure hydraulically extendable at the rear by approx. 750 mm to the left and right - Sliding roof with pivotable portal beam - Sliding curtain with 700 mm length reserve, tension belts spaced approx. 600 mm apart - Height to top edge of structure approx. 3,960 mm - Driving with an open sliding roof is not permitted and will lead to damage of the tarpaulin - Cover plates to bridge the gap between ramps and loading platform - Electro-hydraulic unit at the rear, under the loading platform - At the gooseneck and ramps, left and right respectively, one holder for warning signs including socket - European reflective signs (red-yellow) at the rear of the trailer - 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area Chodpfxey Drdcj Apbsb - Lifting axle at the front axle with control via TEBS E depending on current axle load and loading condition - Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm on the right in the direction of travel, between the axles - Painted sand layer on tread plates on the gooseneck and loading platform as anti-slip protection - BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 - Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm - Axle load gauge including load diagram - HRM (High Resistance Metallisation) metallization of the outer frame - Entire steel structure shot-blasted, then all defined visible surfaces hot-finished in metallisation with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 1.180 mm, Oprema: ABS, Availability: Immediate NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Unladen weight: 6,100 kg # Fifth-wheel load: 15,000 kg # Coupling height: 980 mm Cedpfxevm Nm Is Apbshb # BPW axles with disc brakes # 1st axle liftable # Jost landing legs 24 t # Wabco 4S/2M EBS with RSS # 2 x 7-pin and 1 x 15-pin electrical connections # 24V Aspöck lighting system # Tyres: 6 x 445/45 R19.5 premium brand tyres on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Oversize equipment (4x galvanized illuminated oversize signs with LEDs + 1 x rotating beacon) # 2 stainless steel toolboxes mounted on right & left (in direction of travel) # 6x2 Jost recessed container locks # Stake holder mounted on front wall + 20 stakes (1,500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the chassis frame # 7 x 2 lashing rings 4 t on the platform, 108 lashing points in the outer frame, each 2 t # Side boards 600 mm high, removable, incl. storage compartment under the vehicle # Chassis KTL-coated and painted in RAL 3020 # Front wall RAL 3020 ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 01/2001, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, skupna dolžina: 13.950 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, medosna razdalja: 9.310 mm, barva: bela, Leto izdelave: 2001, Oprema: ABS, = Additional Options and Accessories = - Air suspension - Toolbox = Remarks = HEAVY DUTY PACTON / JUMBO 13.60 METER CLOSED BOX WITH FULL STEEL CHASSIS, WOODEN FLOOR, BPW AXLES & DRUM BRAKES!! Chsdpfxev Awkto Apbeb BPW - ECO AXLES!! DRUM BRAKES!! ABS BRAKE SYSTEM!! SIZE: LENGTH x WIDTH x HEIGHT; Approx. 13.60 x 2.48 x 2.65 m (INTERNAL) WOODEN FLOOR!! EXTRA STORAGE HOLES IN FLOOR!! ALUMINIUM REAR DOORS!! MORE TRAILERS (ALL TYPES) AVAILABLE IN STOCK FOR SALE, > 75 TRUCKS/TRAILERS IN STOCK!! SHIPMENT, LOADING, STACKING OR TRANSIT REGISTRATION? NO PROBLEM FOR US, WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO VISIT OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW ECO Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 20%; Tire tread right: 20% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 8,090 kg Payload: 31,410 kg Gross vehicle weight: 39,500 kg Functional Body make: JUMBO 13.60 METER PLYWOOD BOX WITH ALUMINIUM DOORS Condition Technical condition: very good Optical condition: good Identification Registration number: OG-79-LR Further Information Please contact the Sales Department or Erik Engel for more information.