Max Trailer Polovični Polnilnik Z Nizkim Nakladanjem nakup rabljenega (51.292)

Stanje: rabljeno, barva: rumena, Leto izdelave: 2008, Goldhofer STZ-L3-27/80A. Letnik: 2008. 7,4-tonske osi BPW. Teža: 13.800 kg. Nosilnost: 26.400 kg. Največja dovoljena masa: 40.200 kg. Obremenitev klampe: 18.000 kg. Raztegljiva do 7,2 metra. 2 x 25 cm razširjena. Servo volan, 3 volanske osi. Aluminijaste ploče + orodjarna na prikolici. Hidravlični sistem prikolice deluje na hidravličnem sistemu tovornjaka. Zračna vzmetitev. Rezervna pnevmatika. Bodpfxezyaule Agtjwu Dimenzije: Priklopna glava: D: 3500 mm. Š: 2550 mm. V: 1550 mm. Višina klampe: 1300 mm. Ploščad: D: 9500 mm. Š: 2550 mm. V: 800 mm. Pnevmatike: 205/65R17,5, 80 %. Daljinski upravljalnik! Številka ID: 684. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, za vse pogodbe, sklenjene s strani družbe Heinhuis, in za pogajanja, ki jim predhodijo. S kakršnim koli odzivom potrjujete veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2008 Lastna teža: 13.800 kg Nosilnost: 26.400 kg Dovoljena skupna masa: 40.200 kg Raztegljiva nadgradnja: Da = Informacije o podjetju = Za več informacij:

Stanje: novo, lastna masa: 12.000 kg, največja dovoljena obremenitev: 54.000 kg, skupna masa: 66.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the platform (LC 10,000 daN) - Cut-outs in the outer frame for tensioning straps (LC 2,000 daN) - Hardwood floor approx. 48 mm thick, checker plate over the axles Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Brake system: - WABCO brake system according to EU regulations with EBS-E (4S3M) Steel construction: - High-strength fine-grained steel chassis Axles and tires: - BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve Bwodoykpbkjpfx Agtju - Axle tool kit - TPMS tire pressure monitoring system to ECE R 141 - Tires: 245/70 R 17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Forced steering, operated from front and rear using a cable remote control with push buttons, with single-track monitoring of axles - European reflective panels (red-yellow) on trailer rear - White reflective tape in accordance with EU regulations on sides and on extension, rear red - Mountings on gooseneck and rear left/right for warning signs, incl. socket - Galvanized extensions, pull-out approx. 230 mm per side - Mount for rotating beacon at rear of trailer - Galvanized folding supports under the rear slope of the loading area - Mudflap at the rear of the trailer - Manual and documentation on USB stick - BEKAMAX (Pico) centralized lubrication system with standard grease NLGI-2 and removable pump guard - Removable ALU side boards and rear board on gooseneck, approx. 2,440 x 400 mm - Rear removable, galvanized stanchions (superstructure length approx. 2,560 mm) - INOX toolbox 1,350x400x400 mm on gooseneck - Note: toolbox covers oil filler cap - 4 pairs of WADER container pockets in the loading area for 1x 20ft, 2x 20ft, 1x 40ft or 1x 45ft container - 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame - Sliding mounting bar for ALU loading ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the sloping rear section - Lift axle on front axle with control via TEBS-E depending on current axle load and load condition - Four extendable warning boards, approx. 400 mm, size approx. 423 x 423 mm, each with position light - Mounting for rotating beacon on the warning boards - Radio remote control for forced steering, additionally to cable remote, with indicator lights on receiver for single-track monitoring - Checker plate surfaces on gooseneck and loading area with painted-on sand coating for slip resistance - 80 km/h speed stickers on rear and both sides - Load gauge for axle load measurement, incl. load diagram

Stanje: dober (rabljeno), konfiguracija osi: > 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, prva registracija: 07/2017, skupna dolžina: 14.200 mm, skupna širina: 2.520 mm, skupna višina: 3.800 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17,5, barva: rdeča, Leto izdelave: 2017, = Dodatne možnosti in dodatna oprema = - Zračna vzmetenje = Opombe = Broshuis 4 SLA-18-48. Letnik: 2017. 12-tonske zračne vzmetene osi Broshuis SL. Lastna teža: 13.550 kg. Nosilnost: 54.450 kg. Skupna teža: 68.000 kg. Obremenitev sedelne sklopke: 20.000 kg. Raztegljivo za približno 5,4 metra. Medosna razdalja: 30 cm. Razširljivo za 2 x 25 cm. 1. in 2. os sta izvedeni kot dvižne osi. 1. in 4. os sta izvedeni kot krmiljene osi. Aluminijaste stranske ograje na prikolici. Bwodpfx Agjztdrnstou Zračno vzmetenje (ločeno nastavljivo na levi in desni strani). Hidravlični sistem prikolice se upravlja prek priključka NATO na vlečni enoti. Hidravlične rampe: - Dolžina: 3000 mm. - Hidravlično pomikajoče se v stransko smer (levo/desno). Dimenzije: Prikolica: D: 4250 mm. Š: 2470 mm. V: 1550 mm. Višina sedelne sklopke: 1200 mm. Nosilna površina: D: 9150 mm. Š: 2520 mm. V: 900 mm. 2 x daljinski upravljalnik! Pnevmatike: 245/70R17,5 (globina profila 70 %). Dimenzije: D: 14.200 mm. Š: 2520 mm. V: 3800 mm. ID št.: 157. Za vse objave, ponudbe in cene podjetja Heinhuis, pa tudi za vse pogodbe, sklenjene s podjetjem Heinhuis, in za pogajanja, ki jim predhodijo, veljajo splošni pogoji poslovanja podjetja Heinhuis. S katerimkoli oblikam stika se strinjate z veljavnostjo splošnih pogojev poslovanja podjetja Heinhuis in potrjujete, da ste se seznanili s temi splošnimi pogoji poslovanja. Naše cene so neto izvozne cene. = Dodatne informacije = Konfiguracija osi Velikost pnevmatik: 245/70R17,5 Znamka osi: Broshuis SL air Vzmetenje: Zračno vzmetenje Zadnja os 1: Dvojne pnevmatike; Dvižna os; Max. obremenitev osi: 12000 kg; Krmiljena; Globina profila pnevmatik levo znotraj: 70 %; Globina profila pnevmatik levo zunaj: 70 %; Globina profila pnevmatik desno znotraj: 70 %; Globina profila pnevmatik desno zunaj: 70 % Zadnja os 2: Dvojne pnevmatike; Dvižna os; Max. obremenitev osi: 12000 kg; Globina profila pnevmatik levo znotraj: 70 %; Globina profila pnevmatik levo zunaj: 70 %; Globina profila pnevmatik desno znotraj: 70 %; Globina profila pnevmatik desno zunaj: 70 % Zadnja os 3: Dvojne pnevmatike; Max. obremenitev osi: 12000 kg; Globina profila pnevmatik levo znotraj: 70 %; Globina profila pnevmatik levo zunaj: 70 %; Globina profila pnevmatik desno znotraj: 70 %; Globina profila pnevmatik desno zunaj: 70 % Zadnja os 4: Dvojne pnevmatike; Max. obremenitev osi: 12000 kg; Krmiljena; Globina profila pnevmatik levo znotraj: 70 %; Globina profila pnevmatik levo zunaj: 70 %; Globina profila pnevmatik desno znotraj: 70 %; Globina profila pnevmatik desno zunaj: 70 % Teže Lastna teža: 13.550 kg Nosilnost: 54.450 kg Skupna teža: 68.000 kg Funkcionalnost Višina nosilne površine: 90 cm Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: nobene = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, barva: modra, Leto izdelave: 2016, Faymonville F-S43-1ABA. Letnik: 2016. 10-tonske osi SAF. Maksimalna teža: 42.000 kg. Nosilnost vlečnega čepa: 18.000 kg. Servo volan na 3 krmilnih osi. Zračna vzmetitev. Vitli. EBS ABS ALB. Hidravlični sistem, ki deluje na elektriko Duplo. Hidravlični most, ki se spušča od tal do prikolice. Dolžina: 3000 mm. Centralni sistem za mazanje. 2 hidravlična podstavka na zadnji strani. 2-smerne hidravlične rampe: - hidravlična nastavitev od leve proti desni. - dolžina: 2800 + 1700 mm. Dimenzije: Prikolica: D: 3800 mm. Š: 2480 mm. V: 1400 mm. Nosilnost vlečnega čepa: 1150 mm. Platforma: D: 9600 mm. Š: 2550 mm. V: 900 mm. Bodpfxszybiqj Agtswu Pnevmatike: 235/75R17,5, 70 %. Nemška prikolica! ID št.: 449. Splošni pogoji poslovanja družbe Heinhuis veljajo za vse oglase, ponudbe in cenitve družbe Heinhuis, vse pogodbe, sklenjene s strani družbe Heinhuis, in pogajanja, ki jim predhodijo. S kakršnim koli odgovorom potrdite veljavnost splošnih pogojev poslovanja družbe Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Več informacij = Letnik: 2016 MVT: 42.000 kg = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Bedpfx Ajyylduogtewu Extendable loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc - Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of swing-out lashing rings (LC 5,000 daN) - 2 pairs of swing-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock operable via reverse gear and manual activation - Air suspension with raise and lower valve - Axle tools - TPMS tire pressure monitoring system compliant with ECE R 141 - Tires: 235/75 R17.5 3PMSF Accessories included: - Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket - One spare wheel with holder in front of the bulkhead - 2" kingpin - Galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the front galvanized connection rail - 4 wheel chocks with holders - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports under the incline of the loading area - Cover plates to bridge the gap between ramps and loading area - White reflective tape on sides and on extendable section, rear in red, according to EU regulations - Electro-hydraulic unit at the rear, under the loading area - European reflector boards (red-yellow) on the rear of the semi-trailer - Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm) - Bracket for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline - Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area - Speed sticker 80 km/h on rear and both sides - Load manometer for determining axle loads, including load chart

Stanje: rabljeno, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, prva registracija: 11/2004, skupna dolžina: 10.030 mm, skupna širina: 2.600 mm, medosna razdalja: 1.820 mm, barva: drugo, Leto izdelave: 2004, Zadnja os 1: Največja obremenitev osi: 9000 kg Zadnja os 2: Največja obremenitev osi: 9000 kg Lastna teža: 5.560 kg Nosilnost: 12.440 kg Dovoljena skupna masa: 18.000 kg Registrska številka: WP-NN-71 Bwodez Inacjpfx Agtju

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.300 kg, dovoljena osna obremenitev (os 2): 10.300 kg, dovoljena osna obremenitev (os 3): 10.300 kg, prva registracija: 10/2020, skupna dolžina: 13.850 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 265/70R19.5, Leto izdelave: 2020, Axle configuration Tyre size: 265/70R19.5 Bodpfxjz Dfvye Agtswu Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,300 kg; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 2: Twin tires; Max. axle load: 10,300 kg; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70% Rear axle 3: Twin tires; Max. axle load: 10,300 kg; Steered; Tyre tread left inner: 60%; Tyre tread left outer: 60%; Tyre tread right inner: 60%; Tyre tread right outer: 60% Weights Unladen weight: 10,890 kg Payload: 40,010 kg Gross vehicle weight (GVW): 50,900 kg Functionality Loading platform height: 95 cm Condition Technical condition: good Visual condition: good

Stanje: novo, največja dovoljena obremenitev: 37.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 200 NEW | extendable | 37t payload | 3 axles | from €57,000 New vehicle – customizable to your specific application. High payload with sturdy construction and maximum cost-effectiveness. ----Highlights: • Extendable loading platform with pneumatic locking • Numerous heavy-duty lashing points for maximum load securing • BPW axles, air-suspended with disc brakes and lift/lower function • Self-tracking axles with electro-magnetic reverse lock Bedsypazxjpfx Agtjwu • WABCO EBS brake system compliant with EU regulations • Robust steel construction with premium corrosion protection • LED lighting system • Mechanical JOST landing gear with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Construction & Design • High-strength fine-grained steel construction for long service life • Metallized chassis with additional cavity sealing • Multi-layer paint finish for optimum protection • Durable wooden floor mounted in sturdy omega profiles ----Included Options • Galvanized front wall (approx. 1,200 mm) • Spare wheel holder under the loading platform • 10 pairs of stake pockets for flexible load securing • EN 12642-XL body • Reflective tape & European reflector plates • Brackets for warning signs incl. socket • Beacon brackets • Air couplings at the front ----Further equipment and individual customizations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/1989, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 1989, Konfiguracija osi Dimenzija pnevmatik: 235/75 R17.5 Zavore: bobnaste zavore Vzmetenje: listnato vzmetenje Zadnja os 1: profil pnevmatike levo: 60 %; profil pnevmatike desno: 40 % Zadnja os 2: profil pnevmatike levo: 80 %; profil pnevmatike desno: 80 % Zadnja os 3: profil pnevmatike levo: 45 %; profil pnevmatike desno: 50 % Teže Lastna teža: 9.400 kg Nosilnost: 24.600 kg Bwsdpfx Aszxlxyegteu Skupna dovoljena masa: 34.000 kg Stanje Poškodbe: nobene

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Bwodpfxsrq Dlfs Agtsu Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 39.400 kg, skupna masa: 50.960 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, obratovalna teža: 10.600 kg, Oprema: ABS, Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck at rear in straight version - 3 pairs of lashing rings (LC 5,000 daN) Extendable load floor: - Load floor in extendable configuration - 5 pairs of lashing rings foldable outward - 3 pairs of lashing rings foldable outward Bwjdpfjt Ag Uwex Agtou - 1 pair of lashing rings laying at the front end of the load floor - Cut-outs in the outer frame of the load floor for attaching tension straps - Approx. 48 mm hardwood flooring, checker plate covering above the axles Landing legs: - JOST mechanical landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and tyres: - BPW axles, two rigid axles, two self-steering axles - Air suspension with drum brakes, with lift/lower function - The self-steering axles are equipped with an electromagnetically operated reverse lock, which can be activated via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Brake system: - Brake system compliant with EU regulations with EBS-E (4S3M) Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations, lighting 24 Volt, ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets - Connections according to ISO: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Paintwork: - High-quality and durable corrosion protection on the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer - High-quality single-colour 2-component (2K) top coat in Novagrau - Rear section metallised and painted in RAL 9010 (Pure White) Included accessories: - One spare wheel with holder in front of the bulkhead - 2" king pin - Galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanised connection bar at the front - 4 wheel chocks with holder at the front wall - Galvanised folding supports under the load floor slope - Holder for a warning beacon at the rear of the trailer - Galvanised extensions, extendable by approx. 230 mm per side - White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear - On the gooseneck and rear panel, left and right, one bracket each for warning panels including socket - European reflective markings (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - On the gooseneck, plug-in ALU side walls and rear wall, approx. 2,440 x 400 mm - The rear, galvanised plug-in side stanchions are removable, length of the body approx. 2,560 mm - 7 pairs of WADER container pockets - 1x 20ft container on the load floor; 1x 40ft container on the load floor; 1x 40ft container above the gooseneck; 2x 20ft container - 7 pairs of stanchion sockets for plug-in stanchions 100 x 50 mm in the outer frame of the load floor - Lift axle on the front axle with control via TEBS E, depending on the current axle load and load condition - Sliding plug-in rail for ALU loading ramps at the rear of the vehicle - Anti-slip sand finish painted on the checker plates on the gooseneck and load floor - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, each with a position lamp - Holder for warning beacon on the warning boards - 80 km/h speed stickers at the rear and on both sides - Axle load gauge for determination of axle loads inclu

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Bsdpfx Aohlz Shjgtowu Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: novo, največja dovoljena obremenitev: 39.000 kg, skupna masa: 50.100 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, Oprema: ABS, MAX Trailer Type 110 NEW | Hydraulic steering – extendable | 39t payload | 3 axles | from €97,400 New vehicle, customizable to your specific operation requirements. High payload with robust design and maximum cost-efficiency. ----Highlights: • Extendable loading platform with durable 48 mm hardwood floor • Galvanized steel ramps with hydraulic lifting mechanism (up to 40,000 kg load capacity) • Hydro-mechanically forced-steered BPW axles with air suspension • Heavy-duty lashing points for professional load securing • WABCO EBS braking system according to EU regulations • LED lighting system • Mechanical JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) ----Body & Construction • High-tensile fine-grained steel construction • Metallized vehicle chassis for optimal corrosion protection • Multi-layer paint structure with additional cavity sealing • Checker plate above axles for increased durability Very important for trust. ----Included options • Galvanized front wall (approx. 400 mm) • Electro-hydraulic power pack • Convenient cable remote steering • Spare wheel with holder • Galvanized folding supports • Extendable warning panels with LED • Beacon bracket • Reflective tape according to EU regulations ----Further equipment and customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration. Bedpfx Aeypa Rgogtowu

Stanje: novo, lastna masa: 7.900 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, obratovalna teža: 7.900 kg, Oprema: ABS, Swan Neck: - Swan neck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood decking Loading Area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Recess in the chamfer and encroaching into the loading area for receiving the excavator bucket stick approx. 2,900 x 750 x 210/290 mm - Cut-outs in the external frame of the loading area for attaching tension straps - Hardwood decking approx. 48 mm thick, over the axles with tread plate covering Bsdpfx Ageunrapjtewu Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, 24t lifting capacity (50t test load) Axles and Tyres: - BPW axles and suspension, 2 axles rigid, 1 axle self-steering t- Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - TPMS tyre pressure monitoring system compliant with ECE R 141 - Tyres 235/75 R 17.5 Paintwork: - Complete steel structure blasted automatically by wheel blast machine after welding - Second blasting with corundum for optimal adherence of the coating system - Final coating: two layers of 2K top coat, solid colour in RAL MB 7350 Novagrau - Rims painted silver - Rear section metallised and coated in RAL 9010 (Pure White) - Cavity sealing with special wax Electrical System: - Electrical system according to EU standards, 24 volt ASPÖCK-NORDIK (ASS3) lighting - ASPÖCK-UNIBOX at front connection rail with sockets 2x 7-pin & 1x 15-pin Included Accessories: - Multiple lashing positions - 2" king pin - One galvanised steel front wall approx. 400 mm high - Yellow-red air couplings on galvanized front connection rail - 4 wheel chocks with holders mounted on the front wall - Receiver at rear of swan neck for ALU loading ramps - Galvanised folding supports beneath rear chamfer of loading area - Bracket for beacon at rear of trailer - Galvanised extendable outriggers, extendable by approx. 230 mm per side - White reflector tape to EU spec at sides and rear, red at rear - Brackets for warning signs on left and right of swan neck and rear panel, including socket - ALU side boards and rear board on swan neck, removable, approx. 2,440 x 400 mm - Rear galvanised stake pockets are removable - 2 pairs WADER container pockets in loading area for 20ft container - 6 pairs stake pockets for removable stakes 100 x 50 mm in the outer frame - Adjustable hanging rail for ALU access ramps at the rear of the vehicle - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the loading area chamfer - Sand-finish anti-slip coating painted onto the tread plate on swan neck and loading area - Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm with position light - Bracket for beacon fitted to warning boards - 80 km/h speed sticker rear and on both sides - European reflective signs (Red-Yellow) at the rear of trailer - Manual and operating instructions on USB stick - HRM metallisation (High Resistance Metallisation) of the external frame - Complete steel structure shot-blasted, then specified visible surfaces metallised with ZINACOR 850 (Zinc 85% - Alu 15%) hot-finished

Stanje: rabljeno, številka stroja/vozila: W09TS300870M49625, lastna masa: 12.400 kg, največja dovoljena obremenitev: 32.600 kg, skupna masa: 450.000 kg, konfiguracija osi: 3 osi, skupna dolžina: 14.340 mm, skupna širina: 2.550 mm, skupna višina: 3.780 mm, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2008, The Meusburger MTS 3 low-loader is the ideal solution for anyone seeking a reliable, robust, and versatile truck trailer. Its high-quality workmanship and sturdy construction ensure a long service life and a high level of safety in any application. Thanks to its spacious platform, the MTS 3 offers ample room for a wide variety of loads, whether in construction or heavy haulage. The premium build quality and solid design make it a worthwhile investment for businesses. For more information or consultation, please do not hesitate to contact us! Performance Features / Basic Data: Axles: 3 Length: 14.34 m Width: 2,550 mm Height: 3,780 mm Unladen weight: 12,400 kg Kingpin load: 18,000 kg Gross vehicle weight: 45,000 kg (technical) Max. axle load: 10,000 kg Tyres: 235/75R17.5 Equipment: - Two-piece hydraulic rear ramp - Axle spacing 1/2: 1.41 m - Axle spacing 2/3: 1.31 m - Axle 1: liftable Bwjdsygxb Sspfx Agtou - Axles 2 and 3: hydraulically steered - NATO socket

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1985, Ravna prikolica CTC SPA RP26S Bodpez Hz Dxsfx Agtowu Prva registracija: 1985 3 osi Pnevmatike v stanju 40/50 % Dolžina: 9,68 m, širina: 2,50 m, nosilnost: 19.500 kg Dvojne hidravlične rampe Splošno dobro stanje Na voljo takoj OVREDNOTIMO MENJAVE VOZIL VSEH ZNAMK, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, Z OPREMO CIFA, SERMAC, PUTZMEISTER; ALI GRADBENE STROJE CATERPILLAR, FIAT HITACHI, KOMATSU

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2017, Meusburger MTS-3. Letnik: 2017. 10 ton osi BPW. Največja dovoljena masa: 38.500 kg. EBS ABS ALB. Hidravlični sistem prikolice, deluje po standardu NATO. Rebrasta talna površina. Hidravlični most od tal do vrat: - Dolžina: 3450 mm. Vinska. Hidravlično raztegljiva rampa. Zračna vzmet. Bedpozyb Duefx Agtswu Tretja os – krmilna os (z naklonom). Dimenzije: Vrata: D: 3370 mm. Š: 2550 mm. V: 1300 mm. Višina kraljevega bolta: 1150 mm. Talna površina: D: 7100 + 2750 mm. Š: 2550 mm. V: 900 mm. Pnevmatike: 235/75R17,5, 50 %. Nemška prikolica! ID št: 528. Splošni pogoji poslovanja podjetja Heinhuis veljajo za vse oglase, ponudbe in cenitve podjetja Heinhuis, za vsa sklenjena sporazuma s podjetjem Heinhuis in za pogajanja, ki jim sledijo. S kakršnim koli odgovorom potrđujete veljavnost splošnih pogojev poslovanja podjetja Heinhuis in izjavljate, da ste se seznanili s temi splošnimi pogoji. Naše cene so izvozne neto cene. = Dodatne informacije = Letnik: 2017 Največja dovoljena masa: 38.500 kg Cena: Na zahtevo = Podatki o podjetju = Za več informacij:

Stanje: rabljeno, največja dovoljena obremenitev: 36.515 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izvod opreme: Bodpfx Agozqiiastswu V-priklop: V-priklop s poševnimi robovi, spredaj pribl. 45° in zadaj pribl. 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Tla iz trdega lesa, debeline pribl. 30 mm. Platforma z raztegljivo izvedbo: Platforma z raztegljivo izvedbo in zadaj poševnimi robovi pribl. 1.000 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 3 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno na sprednjem delu platforme (LC 10.000 daN). Tla iz trdega lesa, debeline pribl. 48 mm, nad osmi rebrasto jeklo. Osi: Osi BPW in vzmetenje, vse osi so hidravlično-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) – znamka po naši izbiri. Podporne noge: JOST podporne noge (mehanske) z 2-stopenjskim menjalnikom za pribl. 24 t nosilnosti (pribl. 50 t testna obremenitev). Zavorna sistema: Zavorna sistema v skladu z direktivami EU s sistemom EBS-E (2S2M) brez povezovalnih vodov do vlečne enote. Lakiranje: Odlična in dolgotrajna protikorozijska zaščita standardno peskanega jeklenega okvirja, zagotovljena s 2-komponentno (2K) osnovo z večjo vsebino cinka. Kakovostno 2-komponentno (2K) končno lakiranje v eni barvi, RAL 3002, karminska rdeča. Zadnji del je metaliziran in lakiran v RAL 9010 (čista bela). Metalizirano lakiranje ni mogoče. Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z direktivami EU, razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na sprednji priključni plošči z vtičnicami 24N, 24S in 15-polna. Priključek v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključeno naslednje dodatne opreme: - 2-palčni kraljevi zatič - pocinkana jeklena sprednja plošča, pribl. 400 mm visoka - rumeno-rdeče zračne spojke na pocinkani sprednji priključni plošči - 4 klini z nosilci na sprednji plošči (± 5 kg) - nosilec za rezervno kolo pred sprednjo ploščo - elektro-hidravlična agregat (± 45 kg) - dodatno krmiljenje od spredaj in zadaj s kabelskega daljinskega upravljalnika preko gumbov, z nadzorom enoslednosti osi (brez vgradnje v vlečno enoto) - nosilec na zadnjem delu V-priklopa za aluminijaste rampe - evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice - rumen odsevni trak v skladu z direktivami EU na straneh, na raztegljivi platformi in na zadnji strani prikolice - na V-priklopu in zadnji plošči, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico - nosilec za okroglo luč na zadnji strani prikolice - pocinkani zložljivi nosilci pod poševnino platforme - odbijač blata na zadnji strani prikolice - priročnik in opis na USB-pomnilniku - nalepka za omejitev hitrosti 80 km/h na zadnji strani in na obeh straneh - manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.800 kg, največja dovoljena obremenitev: 28.200 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/1987, naslednji pregled (TÜV): 09/2027, skupna dolžina: 12.500 mm, skupna širina: 2.500 mm, skupna višina: 900 mm, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 8.25 r 15, barva: svetlo modra, Leto izdelave: 1987, Oprema: dvižna zadnja plošča, prikolice s tremi osmi, mehansko vzmetenje, gooseneck okvir z elektrohidravličnimi zadnjimi rampami, elektrohidravlični vitel na sprednji strani z jekleno vrvjo in vlečno kljuko, dolžina 12,50 m, leto izdelave 1987, poškodbe na ploščadi, stranski vitli, stranske kavlji, vozilo je bilo v celoti pregledano do 30. 09. 2027 – AVTORIZIRANI PRODAJALEC INTERDRIVE SRL – PARMA. Bjdpfx Ajz Ak S Hogtewu

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2023, naslednji pregled (TÜV): 11/2024, Leto izdelave: 2023, Oprema: ABS, Undamaged chassis frame floor 6x new tires with rims 40-foot tipper Own tipping unit, powered by truck batteries Lift axle Water tank with soap dispenser Toolbox LED lights Suitable for transporting 40-foot containers Bsdpfozfyk Djx Agtswu Available for rental: 20-foot 2- or 3-axle chassis 20-foot tipping chassis 40-foot tipper chassis 40-foot chassis with rear extension 45-foot multi-chassis 18 to 26 m³ rear tipper bodies Interested? You can request our price list at any time without obligation. We sell tires and rims for trucks & trailers Brands: Fulda, Bridgestone, Petlas Sizes: 315 / 55 R22.5 385 / 55 R22.5 385 / 65 R22.5

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, prva registracija: 03/2017, dolžina tovornega prostora: 18.500 mm, širina tovornega prostora: 2.530 mm, višina nakladalnega prostora: 2.480 mm, skupna dolžina: 18.500 mm, skupna širina: 2.530 mm, skupna višina: 2.480 mm, vzmetenje: zrak, velikost pnevmatike: 245/70-R17.5, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema = - BPW osi - EBS - Dvižna os - Zračno vzmetenje - Rezervno kolo - Bobnaste zavore - Centralno mazanje = Opombe = lep BROSHUIS 3ABSD-48/1, 3-osno nizkošasijsko prikolico letnik 2017 z ABS/EBS, dovoljena skupna masa: 59.000 kg, podprta masa s sklopko: 23.000 kg, hidravlično krmiljenje na 2. in 3. osi, dvižna os na 1. osi, hidravlične rampe (2-delne, dolžina: 310 + 190 cm, širina: 91 cm, naklonski kot 8°, nastavljiva širina), hidravlična dvižna miza, hidravlične podporne noge zadaj, električna vitla (8.165 kg z 27,4 m jeklenico in kavljem), višina nakladalne površine: 92,5 cm, 2 para vrst držal za kole, razširitveni nosilci, različna pritrdilna mesta in držala za kole, BPW Eco Plus osi z bobnastimi zavorami in dvojnimi pnevmatikami zadaj s pnevmatikami 245/70-R17.5 (profil levo: 8/7, 5/9, 9/10 mm; profil desno: 4/9 mm, 9/9, 9/9 mm), 1x rezervno kolo, lastna teža: 16.049 kg, dovoljeno skupno maso: 59.000 kg, belgijska registracija Bsdpfezcnpkjx Agtowu = Dodatne informacije = Konfiguracija osi Mere pnevmatik: 245/70-R17.5 Znamka osi: BPW Eco-Plus Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; dvižna os; max. obremenitev: 12.000 kg; profil pnevmatik levo znotraj: 45%; levo zunaj: 50%; desno znotraj: 55%; desno zunaj: 25% Zadnja os 2: dvojne pnevmatike; max. obremenitev: 12.000 kg; krmiljena; profil pnevmatik levo znotraj: 55%; levo zunaj: 30%; desno znotraj: 55%; desno zunaj: 55% Zadnja os 3: dvojne pnevmatike; max. obremenitev: 12.000 kg; krmiljena; profil pnevmatik levo znotraj: 60%; levo zunaj: 55%; desno znotraj: 55%; desno zunaj: 55% Teže Lastna masa: 16.049 kg Nosilnost: 42.951 kg Skupna dovoljena masa: 59.000 kg Funkcionalno Znamka nadgradnje: Brosuis 3ABSD-48/1 Višina nakladalne površine: 91 cm Raztegljiva nadgradnja: Da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingha.

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable Bodpfx Ajiu Er Aegtswu - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Lowbed: - Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long - Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device - Service lines are protected within the extendable beams and automatically adjust to the lowbed length Rear Undercarriage: - Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame Axles and Tires: - "PENDULUM AXLE", all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function Bwsdpfxeh Hm Ths Agtsu - Hydraulic cylinders with shut-off valves and locking pins for securing in raised position - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres 245/70 R 17.5 / 3PMSF Included Accessories: - Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams - 2" kingpin - Galvanized steel front wall approx. 400 mm high - One spare wheel with holder - At the galvanized front adapter bar yellow-red air couplings - 4 wheel chocks - Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling - Electro-hydraulic power pack - White reflective tape to EU specifications on sides, extension, and rear red - 2 wooden blocks 500x250x200 mm - European reflective plates (red-yellow) on the trailer rear - At the gooseneck and rear wall left and right each a bracket for warning boards including socket - Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2 - Load gauge for determination of axle loads including load diagram - On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm - The rear galvanized insert posts are removable (body length approx. 2,120 mm) - Separate air connection for air gun on the gooseneck - Duomatic air coupling from gooseneck to lowbed - Rear upper section of gooseneck closed with removable cover - 1 pair of steel ramps to bridge the lowbed's pick-up hooks - Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm - Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring - 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4 - 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed - Foldable extensions, approx. 230 mm per side - Loading area features a painted sand layer for anti-slip protection - Dipper stick trough of rear chassis closed at front and rear with plug-in plates - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Bodpsxarl Njfx Agtjwu Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, konfiguracija osi: 3 osi, vzmetenje: zrak, barva: drugo, Znamka osi: BPW Zavore: kolutne zavore Vzmetenje: zračno vzmetenje Bedpfx Agezx Slajtowu Zadnja os 1: profil pnevmatik, leva stran: 100 %; profil pnevmatik, desna stran: 100 % Zadnja os 2: profil pnevmatik, leva stran: 100 %; profil pnevmatik, desna stran: 100 % Zadnja os 3: profil pnevmatik, leva stran: 100 %; profil pnevmatik, desna stran: 100 % Poškodbe: nobene