Nooteboom Obv-55-03V 3 Fach Tele !!! nakup rabljenega (41.168)

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg Ncodpfx Aaehlz S Nonou • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes Njdpoxgm S Djfx Aanecu - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light Nedjup U Hzepfx Aanjcu - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, lastna masa: 14.350 kg, največja dovoljena obremenitev: 53.450 kg, skupna masa: 67.800 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Gooseneck: - Gooseneck in SNT design for optimization of loading bed length, length approx. 3,700 mm - Gooseneck rear with chamfer approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading bed: - Extendable loading bed, length approx. 8,800 mm, rear chamfer approx. 500 mm x 10° - A recess in the loading bed and the chamfered section for receiving the excavator dipper stick, approx. 3,850 x 750 x 210/290 mm Two-part steel ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps hydraulically adjustable individually approx. 235 mm outwards and approx. 215 mm inwards - 'Super Grip' 25 mm rubber flooring and approx. 5 mm steel plate as additional reinforcement on the rear chamfer of the loading bed - Square climbing bars 20 x 30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: - BPW axles and suspension, 1st axle steering, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire sensors fitted on all wheels, including spares Surface treatment: - Complete steel structure automatically blasted with shot blasting system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection - Final painting with 2 layers of 2K top coat, single colour in MB 7350 Novagrau Accessories included: - Plug-in steel front wall, approx. 400 mm high - 3kW electro-hydraulic power unit for controlling hydraulic functions, with the exception of hydraulic winches - 1 spare wheel Ncjdpfx Aoya E A Noanou - Outer carrier on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of horizontal lashing rings in the rear area of the gooseneck - On the gooseneck, 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized - On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized - On top of the gooseneck, approx. 40 mm thick hardwood flooring, above kingpin area with checker plate cover - 2" kingpin - Round NATO socket on front connection strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front cross member - 8 pairs of recessed, fold-out lashing rings in the outer frame of the loading bed - Extendable (galvanized) widenings by approx. 230 mm per side - Wheel recesses with square climbing bars, 15 x 15 mm, in front of the axles fully open up to gooseneck cross beam, approx. 700 x 410 mm - Wheel recesses with square climbing bars, 15 x 15 mm, between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm - ALU covers for wheel recesses, which can also be used as bridging elements for the extension or as widening boards - 1 pair mechanical rear supports - Radio and cable remote control - Lift axle on front axle - Square climbing bars 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board system - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 38.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.200 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: sivo-črna, Oprema: ABS, Cargo Area: • Extendable cargo area with pneumatically operated locking mechanism • Cargo platform with approx. 30 mm thick timber flooring • 7 pairs of external folding lashing rings (LC 5,000 daN) Ncodpoiu Etrofx Aanju • 3 pairs of external folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the cargo area for attaching tensioning straps (LC 2,000 daN) Axles and Tyres: • BPW axles and suspension, all axles hydromechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg • Air suspension with lift and lower valve • Axle tool kit • Tyres: 385/65 R 22.5 • TPMS tire pressure monitoring system compliant with ECE R 141 Brake System: • WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Electrical System: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front control strip with 24N, 24S & 15-pin sockets • Connections as per ISO standards • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Standard Accessories Included: • Remote-controlled steering from front and rear via cable remote control with push buttons, including single-track axle monitoring • 4 wheel chocks with holders mounted on the front wall • 2" king pin • One galvanized steel front wall, approx. 1,600 mm high • Yellow-red air couplings at the galvanized front connection strip • White reflective tape compliant with EU standards on both sides, on extension, and at the rear of the trailer in red • European reflective plates (red-yellow) at the rear of the trailer • One mud flap at the rear of the trailer • Operating manual and instructions • Mount for a revolving beacon at the rear of the trailer • Cargo area with approx. 30 mm thick timber floor inset in omega profiles • 10 pairs of stake pockets (100 x 50 mm) in the outer frame of the cargo bed • 1 spare wheel holder under the cargo area, right-hand side in the direction of travel • Electro-hydraulic unit • At the gooseneck and rear panel left/right, each with bracket for warning signs, incl. socket • Coated sand layer on the main beam as anti-slip protection • 6 pairs of WADER container pockets in the cargo area for 1x20ft, 2x20ft or 1x40ft containers; additional locking point provided in the extension for a 45ft container • 4 pairs of transverse stake pocket rails in the cargo area for plug-in stakes 100 x 50 mm • Access ladder mounted on the right side in the direction of travel • One HDPE toolbox approx. 1,200 x 500 x 480 mm at the front under the cargo bed, left in the direction of travel • BEKAMAX (Pico) centralized lubrication system with removable pump guard • Lift axle on front axle, controlled via TEBS E according to dynamic axle load and load status • Wireless remote control for steering, in addition to cable operation, with indicator lights on receiver for single-track monitoring • Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, equipped with position light • Bracket for revolving beacon on the warning signs • 80 km/h speed sticker on rear and both sides • Load gauge for axle load determination, including load chart • HRM (High Resistance Metallisation) of the outer frame • Complete steel construction shot blasted; subsequently, defined visible surfaces metallised by hot-dip application with ZINACOR 850 (85% zinc – 15% aluminium)

Stanje: novo, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5 3PMSF, barva: siv, Oprema: ABS, Swan neck: Njdpouqlmnsfx Aanjcu - Swan neck with front corners beveled at 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Extendable load area: - Extendable load area with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the load area (LC 10,000 daN) - Cut-outs in the external frame of the load area for attaching lashing straps (LC 2,000 daN) - Approx. 48 mm hardwood flooring, over the axles with checker plate covering Axles and Tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear or manually - Air suspension with lifting and lowering valve - Axle tools - 235/75 R 17.5 tires, 3PMSF Braking system: - WABCO braking system as per EU regulations with EBS-E (2S2M) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Accessories included: - One spare wheel with holder in front of the front wall - 2'' king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection rail - 4 wheel chocks with holder at the front wall - Rear light bracket at the rear of the trailer - Mounting points at the rear area of the swan neck for ALU loading ramps - Galvanized folding supports under the chamfer of the load area - Cover plates to bridge the gap between ramps and load area - White reflective tape according to EU standards on the sides, red at the extension and rear - Electro-hydraulic unit at the rear, under the load area - Bracket for warning panels left and right on the swan neck and ramps, including power socket - Ramp control valves mounted on the right-hand side of the trailer - One mud flap at the rear of the trailer - Manual and documentation on USB stick - On the swan neck aluminum side walls and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - Four warning panels extendable by approx. 400 mm, size approx. 423 x 423 mm, with position light - 3 pairs of WADER container pockets in the load area for a 20ft, 30ft, or 40ft container - 6 pairs of stake pockets 100x50 mm in the external frame of the load area - Galvanized extensions, extendable by approx. 230 mm per side - Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the chamfered area of the load area - Anti-slip sand layer painted on the checker plate above the king pin and load area - Mounting for beacon on the warning panels - European reflective plates (red-yellow) at the rear of the trailer - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads, including load chart - HRM metallization (High Resistance Metallisation) of the external frame - Complete steel construction shot-blasted, then the defined visible surfaces finished hot-metallized with ZINACOR 850 (zinc 85% - aluminum 15%)

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel Nsdpol Ux Rwjfx Aanocu - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Ncedpfx Aaok Eammenju Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Ncedpfxsikyh Hj Aaneu Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: Nodpfxsiuy Nlo Aanecu - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 Nedpfxsi Dwlws Aanecu - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset Ncodeywv Ixopfx Aansu -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm Ncjdpoiu Er Aofx Aanou - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, največja dovoljena obremenitev: 11.400 kg, skupna masa: 15.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.000 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 850 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Metal-Fach T009 Bale Trailer 3-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall dimensions: 11990mm + 800mm x 2480mm x 2900mm Internal dimensions: 9300mm + 800mm x 2380mm x 1875mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading platform Wide tyres Air brake system Load-dependent brake force regulator (ALB) Side underrun protection Side lighting Parabolic suspension Parking brake Adjustable front and rear loading grids Y-drawbar 40 km/h road approval possible Mudguards Custom paint available Njdpfx Aaetw N D Senecu !!! ATTENTION – PLEASE READ !!! We expressly reserve the right to prior sale, as this item is also listed on other platforms. We strongly recommend inspection and verification to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images are for illustration purposes and may show optional accessories at additional cost. The internal dimensions stated are approximate values. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE DEALS AND SURCHARGE POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Stanje: rabljeno, največja dovoljena obremenitev: 34.860 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, Oprema: ABS, Ident. št. vozila: WKESD00000541603 MULTI - TELESKOPSKO ZADAJ + SPREDAJ Lastna masa: 6.140 kg DE HU: zapade SP 02.2026 SAF osi z disk zavorami Namestitev: 1 x 20", 2 x 20", 1 x 30", 1 x 40", 1 x HighCube, 1 x 45 " Pnevmatike: 385/65 R 22,5 Spremembe, vmesna prodaja in napake so izrecno pridržane. Opis služi splošni identifikaciji vozila in ne predstavlja jamstva v smislu prodajne zakonodaje. Pristojno je opis iz kupoprodajne pogodbe. Naša ponudba je na splošno brez novega TÜV pregleda. V primeru želje po novem TÜV pregledu vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko oblepljeno in/ali označeno z oglaševanjem. Uveljavljajo se naši splošni pogoji dobave in plačila. Ncodpfxoxbvfij Aanju

Leto izdelave: 2015, obratovalne ure: 5.790 h, stanje: rabljeno, Vehicle Description: Nedpjy Tlf Eofx Aanocu Teletruk JCB TLT 30 D 4x4 Year of manufacture: 2015 with approx. 5,790 operating hours - used - Serial No.: -2318411- Operating weight approx. 5,100 kg Equipment: - Foam-filled diagonal tyres 4x 27x10x12 with traction profile - Low half-cab with glass windows at the front, rear, top, and right side - 5-spool control valve block - Manual control lever mounted on the steering column - Comfort vinyl seat with hip-high side supports and automatic seat belt - Grease gun incl. grease cartridge - Reversing alarm - Rotating beacon mounted downward on the cab - Work lights on the cab: 2x front, 1x rear - Hydraulic quick coupler with integrated sideshift - Incl. quick-change suspended fork carriage with pallet forks on shaft - Incl. quick-change bulk material bucket, capacity approx. 0.5 m³ Known defects: - Crack in windscreen - Cab door missing Sale is made under exclusion of any warranty and liability. Delivery by freight carrier possible; costs to be borne by the buyer. Subject to changes, errors, and prior sale. = Further Information = Please contact Timm Freese for further details.

Stanje: rabljeno, konfiguracija osi: 1 os, prva registracija: 02/1965, skupna dolžina: 11.100 mm, skupna širina: 2.500 mm, skupna višina: 1.700 mm, vzmetenje: jeklo, velikost pnevmatike: 164/16R0, medosna razdalja: 9.800 mm, barva: drugo, Leto izdelave: 1965, Number of axles: 1, twin tyres, payload: 22,525 kg, unladen weight: 8,475 kg, gross weight: 31,000 kg, chassis type: full chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, body year: 1965, low-loader type: semi low-loader, loading platform length: 670 cm, gooseneck length: 280 cm, axle type: BPW = Further information = General information Cab: day cab Registration number: OL-60-83 Driveline Fuel type: diesel Transmission Transmission: manual gearbox Axle configuration Tyre size: 164/16R0 Brakes: drum brakes Suspension: leaf suspension Axle 1: twin tyres; left inner tyre tread: 3 mm; left outer tyre tread: 8 mm; right inner tyre tread: 15 mm; right outer tyre tread: 11 mm Weights Unladen weight: 8,475 kg Payload: 22,525 kg Gross vehicle weight: 31,000 kg Environment Emission class: Euro 0 Condition Nodpsyr Dhhofx Aanjcu Overall condition: fair Technical condition: fair Optical condition: fair Damages: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units and trailers. Our range covers all European makes, years and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-moving stock • Recognisable quality • Good prices • Correct business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates quickly arranged • Expert technical services • The assurance of "recognisable quality" • And more.... Please visit our website for special offers and our full stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask us directly about our European warranty package.

Stanje: rabljeno, lastna masa: 18.240 kg, največja dovoljena obremenitev: 45.760 kg, skupna masa: 64.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, dolžina tovornega prostora: 12.120 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70R19.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lift and lower function, ABS (anti-lock braking system), lashing eyes. Ncodpfx Aaoyf E E Ujnju Body: Low-bed semi-trailer with 3 hydraulically steered axles & jeep dolly. Includes jeep dolly with 10t SAF axle & 295/80R22.5 tires! Rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m in the low-bed section! With radio and cable remote control, automatic tracking. A construction specification is available and can be sent on request! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted!

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 03/2003, medosna razdalja: 10.550 mm, Leto izdelave: 2003, Oprema: ABS, dvižna zadnja plošča, = Dodatne možnosti in oprema = - Zračno vzmetenje - Centralno mazanje = Dodatne informacije = Konfiguracija osi Zadnja os 1: Dvižna os; Maks. obremenitev osi: 10.000 kg Zadnja os 2: Maks. obremenitev osi: 10.000 kg Zadnja os 3: Maks. obremenitev osi: 10.000 kg Teže Lastna teža: 14.420 kg Nosilnost: 33.580 kg Najv. dovoljena skupna teža: 48.000 kg Funkcionalno Višina nakladalne površine: 90 cm Vzdrževanje Tehnični pregled (APK): veljaven do 01.2027 Stanje Tehnično stanje: zelo dobro Videz: zelo dobro Poškodbe: nobene Nodpfxjzfpkto Aanecu Finančne informacije Cena: Na zahtevo

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 09/1993, dolžina tovornega prostora: 29.200 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 29.200 mm, skupna širina: 2.500 mm, skupna višina: 1.320 mm, vzmetenje: hidravlika, velikost pnevmatike: 275/70 R22.5, medosna razdalja: 10.240 mm, barva: drugo, Leto izdelave: 1993, Nadgradnja Leto izdelave: 1993 Višina krožnika: 120 cm = Dodatne informacije = Konfiguracija osi Dimenzije pnevmatik: 275/70 R22.5 Zadnja os 1: Dvojna montaža; Najv. dovoljena osna obremenitev: 10.000 kg; Krmiljena; Profil pnevmatik levo znotraj: 70%; Profil pnevmatik levo zunaj: 70%; Profil pnevmatik desno znotraj: 70%; Profil pnevmatik desno zunaj: 70% Zadnja os 2: Dvojna montaža; Najv. dovoljena osna obremenitev: 10.000 kg; Krmiljena; Profil pnevmatik levo znotraj: 70%; Profil pnevmatik levo zunaj: 70%; Profil pnevmatik desno znotraj: 70%; Profil pnevmatik desno zunaj: 70% Zadnja os 3: Dvojna montaža; Najv. dovoljena osna obremenitev: 10.000 kg; Krmiljena; Profil pnevmatik levo znotraj: 70%; Profil pnevmatik levo zunaj: 70%; Profil pnevmatik desno znotraj: 70%; Profil pnevmatik desno zunaj: 70%; Zavore: bobnaste zavore; Vzmetenje: hidravlično vzmetenje Teže Lastna teža: 12.000 kg Nosilnost: 36.000 kg Dovoljena skupna masa: 48.000 kg Funkcionalno Višina nakladalne površine: 132 cm Nedpfxjzdkwrj Aanocu Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Identifikacija Registrska številka: OD-22-FG = Informacije o podjetju = Za več fotografij glejte: Zakaj kupiti pri Thomas Trucks? Odgovor je preprost. Thomas Trucks je eno izmed neodvisnih trgovskih podjetij po vsem svetu na področju gospodarskih vozil. Pri nas lahko izbirate iz stalno spreminjajoče se ponudbe rabljenih tovornjakov, traktorjev, prikolic in polprikolic. V ponudbi imamo vse evropske blagovne znamke, letnike in cenovne razrede. Vedno boste našli ustrezno vozilo po pravi ceni! Thomas Trucks vedno nudi: - Konkurenčne cene - Odlično storitev - Prostorno in hitro spreminjajočo se zalogo - Preverjeno kakovost - Korektno trgovino - Govorimo več jezikov - Spremljava pri uvozu in prevozu - Hitro urejanje (izvozne) registracije - Profesionalne tehnične storitve - In še več. Obiščite spletno stran: in si oglejte našo celotno ponudbo ter konkurenčne cene Odprti smo 6 dni v tednu. Potrebujete pomoč pri izvozu, uvozu ali prevozu vašega vozila? Kontaktirajte našo prodajno ekipo. Možno je tudi, da vaše trenutno vozilo prodamo mi. Prizadevamo si, da so podatki prikazani čim bolj natančno, vendar iz teh podatkov ni možno uveljavljati pravic. Prav tako vam lahko pomagamo urediti financiranje v Nizozemski.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 05/1992, vzmetenje: hidravlika, barva: modra, Leto izdelave: 1992, BELGIJSKA REGISTRACIJA IZVLEČLJIV DO 19,53 METRA HIDRAVLIČNO VZMETENJE SAF OSI TWISTLOCKI ZA KONTEJNERJE = Dodatne informacije = Znamka osi: SAF Vzmetenje: hidravlično vzmetenje Nedpfxszbdqzo Aanscu Lastna teža: 9.920 kg Nosilnost: 38.080 kg Skupna dovoljena masa: 48.000 kg Tehnično stanje: zelo dobro Optično stanje: zelo dobro Za več informacij kontaktirajte Thierry Leemans.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/1995, skupna dolžina: 15.780 mm, skupna širina: 2.490 mm, barva: drugo, Leto izdelave: 1995, R020359 = Further Information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 18,320 kg Payload: 26,680 kg Gross vehicle weight (GVW): 45,000 kg Technical condition: very good Visual condition: very good Registration number: ZZ-77-21 = Company Information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Nodpeymrdmjfx Aanocu Office phone: Mobile: Dutch – English – German – French – Spanish – Italian (Available via WhatsApp and Viber). Mobile: Dutch (Available via WhatsApp and Viber). When paying by bank transfer, the funds must be transferred to our bank account as specified below. Always verify the payment details provided on our website. If you have received different information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 10/1993, dolžina tovornega prostora: 7.010 mm, širina tovornega prostora: 2.480 mm, skupna dolžina: 10.610 mm, skupna širina: 2.490 mm, medosna razdalja: 6.210 mm, barva: drugo, Leto izdelave: 1993, Axle Configuration Maximum front axle load: 000 kg Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Weights Unladen weight: 6,220 kg Payload: 21,780 kg Gross vehicle weight (GVW): 28,000 kg Functionality Loading platform height: 92 cm Maintenance, History and Condition APK (Technical Inspection): valid until 12/2026 Technical condition: very good Ncjdpfx Aozacfujaneu Visual condition: very good Identification Registration number: WK--RF = Company Information = If you have any questions or suggestions, don’t hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: Mobile (Dutch - English - German - French - Spanish - Italian): Available on WhatsApp and Viber. Mobile (Dutch): Available on WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account detailed below. Always verify the payment details as stated on our website. If you receive any other information, please contact us immediately. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Stanje: rabljeno, prva registracija: 02/2001, barva: drugo, Leto izdelave: 2001, License plate: UUM020 Ncsdsy T E Utepfx Aansu

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 06/2022, dolžina tovornega prostora: 11.060 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 1.500 mm, skupna dolžina: 113.500 mm, skupna širina: 2.480 mm, skupna višina: 1.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65/22.5, barva: rdeča, Leto izdelave: 2022, Oprema: ABS, = Dodatne možnosti in oprema = Nedpfx Aaev I R N Tsnjcu - Zračno vzmetenje - Centralno mazanje = Nadaljnje informacije = Konfiguracija osi Dimenzije pnevmatik: 385/65/22.5 Znamka osi: SAF Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: Max. obremenitev osi: 10.000 kg Zadnja os 2: Max. obremenitev osi: 10.000 kg; vodena Zadnja os 3: Max. obremenitev osi: 10.000 kg; vodena Teže Lastna teža: 8.370 kg Nosilnost: 39.630 kg Največja dovoljena masa: 48.000 kg Funkcionalno Višina nakladalne površine: 150 cm Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro NOOTEBOOM OVB-48-03 3-OSNA NIZKA POLPRIKOLICA ZRAČNO VZMETENJE SAF OSI 2. IN 3. OS UPRAVLJANI Z ELEKTROHIDRAVLIČNIM DODATNIM KRMILJENJEM DALJINSKO UPRAVLJANJE CENTRALNO MAZANJE D=1106CM Š=250CM 34x TALNI SIDRNI PRSTANI 20x RONGPALOV