Meusburger Mts-3 - Tiefbett - Teleskop - Nr.: 798 nakup rabljenega (37.884)

Stanje: rabljeno, največja dovoljena obremenitev: 45.900 kg, skupna masa: 58.600 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, Oprema: ABS, Vehicle identification number: YAFTL313000014129 First registration: 05.06.2013 German roadworthiness inspection (HU) due Unladen weight: 12,700 kg Overall length: 17,000 mm Gooseneck: 3,700 mm King pin standard 3.5 inch – fifth wheel height: 1,320 - 1,350 mm Low-bed length: 8,500 mm – loading height: approx. 450 mm (ground clearance approx. 150 mm) Chassis frame: 4,300 mm – loading height: approx. 900 mm Suspension system – air suspension – approx. -80 / +160 mm Kjdpfx Asp Spkgohkslr Excavator recess – arm recess Stake pockets including stakes Technical fifth wheel load up to 25,000 kg Axle loads: 3 x 11,200 kg SAF axles with drum brakes 3 x hydraulically forced-steered axles with cable remote control Tyres: 235/75 R 17.5

Stanje: rabljeno, skupna masa: 79.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/1990, Vehicle Identification Number (VIN): ZCAZ54AH0L0010220 IT inspection due Kljdpfowrkvgjx Ahksr Unladen weight: 22,300 kg Detachable gooseneck Fifth wheel height: 1,400 mm – Kingpin 3.5" --- Low-bed length: 5,400 mm – Loading height: approx. 665 mm Chassis length: 5,810 mm – Loading height: 1,020 mm TELESCOPIC extension by 2,700 mm ROR axles with drum brakes Hydraulically suspended 4x hydraulically forced steering Hydraulic system powered by diesel engine Tyres: 9.5 R 17.5 Specifications, prior sale, and errors are expressly reserved. This description serves solely for general vehicle identification and does not constitute a warranty in the legal sense of sale. The description as per the sales contract is decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 35.240 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, Oprema: ABS, Vehicle Identification No.: WLASTH350EWF64373 Unladen weight: 14,760 kg Electro-hydraulic system - 24 volt Overall length: 16,320 mm King pin: 3.5" ---Gooseneck: 3,750 mm Low bed length: 7,500 mm - Loading height: 560 mm Including hydraulically liftable & lowerable loading area 2,500 mm Loading width in low bed and chassis frame: 2,750 mm Extendable by 225 mm per side 2 pairs of wheel recesses in the low bed approx. 220 mm deep, 800 mm wide Chassis frame: 4,675 mm - Loading height: 950 mm Excavator well - dipper recess Kledpfx Ahswyhh Askjr Hydraulically adjustable & movable ramps – 2,950 + 1,700 mm long – 700 mm wide Technical fifth wheel load up to 20,000 kg Axle loads 3 x 10,000 kg BPW Eco axles with drum brakes 3 x hydraulically forced-steered axles with RADIO REMOTE CONTROL Wabco Smart Control Tyres: 235/75 R 17.5 Modifications, interim sale and errors expressly reserved. The description is for general identification of the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is binding. Our offer is generally without new TÜV inspection. Should you require a new TÜV inspection, we will be happy to provide an offer from our partner workshops! Vehicle may be fitted with advertising decals and/or signage. Our general terms of delivery and payment apply.

Stanje: rabljeno, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, Oprema: ABS, Vehicle ID No.: W09S4H44050D04001 – SANH 4-axle including 1-axle DOLLY First registration: 01/09/2005 Next German roadworthiness inspection (HU) due Unladen weight: SANH 16,900 kg / DOLLY 2,700 kg Overall length: 12,600 mm (excluding dolly) Gooseneck dimensions: 3,750 mm – hydraulically adjustable King pin: 3.5 inch Low bed length: 8,600 x 2,530 mm – loading height approx. 900 mm TELESCOPIC up to 12,300 mm Axle loads: 4 x 10,000 kg Fifth wheel load: 25,000 kg (with dolly: 35,000 kg) BPW Eco axles with drum brakes 4 x hydraulically forced steering axles with radio control Stake pockets incl. stakes Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITHOUT spare wheel Klodpfx Ahewadh Seksr DOLLY = hydraulically suspended Tyres: 235/75 R 17.5 – remaining tread 12 mm Modifications, interim sale, and errors excepted. Description serves for general vehicle identification and does not constitute a warranty in the sense of sales law. The description in the purchase contract is binding. Our offer does not include a new TÜV inspection as standard. If required, we can provide an offer from our partner workshops for a new inspection! Vehicle may have promotional decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 34.860 kg, skupna masa: 41.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2012, Oprema: ABS, Ident. št. vozila: WKESD00000541603 MULTI - TELESKOPSKO ZADAJ + SPREDAJ Lastna masa: 6.140 kg DE HU: zapade SP 02.2026 SAF osi z disk zavorami Namestitev: 1 x 20", 2 x 20", 1 x 30", 1 x 40", 1 x HighCube, 1 x 45 " Kljdpfjxbvfijx Ahkjr Pnevmatike: 385/65 R 22,5 Spremembe, vmesna prodaja in napake so izrecno pridržane. Opis služi splošni identifikaciji vozila in ne predstavlja jamstva v smislu prodajne zakonodaje. Pristojno je opis iz kupoprodajne pogodbe. Naša ponudba je na splošno brez novega TÜV pregleda. V primeru želje po novem TÜV pregledu vam z veseljem pripravimo ponudbo naših partnerskih delavnic! Vozilo je lahko oblepljeno in/ali označeno z oglaševanjem. Uveljavljajo se naši splošni pogoji dobave in plačila.

Stanje: rabljeno, največja dovoljena obremenitev: 42.500 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2022, with 12 axles, divided, hydraulically suspended, with hydromechanical forced steering, with rear taper and drive-on ramps STZ-L Gooseneck - robust welded steel construction - formed loading area 3,950 x 2,480 mm incl. tapered rear section Ksdpfxjw Etd Te Ahkjlr - hydromechanical forced steering (dual-circuit steering) - turntable-mounted king pin plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load 24 t - rear turning radius: 2,600 mm Loading Deck - stepped outer beams 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decking installed - extendable by 2,053 mm - includes aluminium bridging rails for creating a flat surface - excavator arm recess at rear of chassis: 4,900 mm long, 880 mm wide, 480 mm deep - chassis length at rear: 4,900 mm including 500 mm rear taper, loading height 890 mm - pair of wheel recesses in lower loading area - hydraulically suspended 3-axle chassis - divided Gigant axles with 600 mm stroke Rear of Vehicle - design: 500 mm rear taper - hydraulic rear support Drive-on Ramps - 2-piece ramps, length: 2,850 + 1,850 mm, width: 800 mm - rubber-coated surface with climbing strip Brake System - dual-line full air brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic rod plates (AGS) - parking brake operated via spring-loaded cylinders - ABV brake system Special Equipment - radio remote control for steering and ramp operation - central lubrication system Technical Data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Loaded saddle height: 1,300 mm Loading Deck Loading area (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Stepped outer beams: 4,630 mm long plus 2,053 mm extension Centre beam: 980 mm Excavator arm recess: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle with hydromechanical forced steering (dual-circuit steering)

Stanje: rabljeno, lastna masa: 10.220 kg, največja dovoljena obremenitev: 28.280 kg, skupna masa: 38.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2004, naslednji pregled (TÜV): 07/2026, skupna dolžina: 2.550 mm, skupna višina: 13.900 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17,5, Oprema: ABS, | Meusburger MPS-3 nizkopodni priklopnik | 3 krmilne osi, BPW osi | Orodjarna | Spodnja ploščad 8,7 m, zgornja ploščad 3,98 m | Nakladalni rob 98 cm | brez naletnih ramp | Zaklepi za kontejnerje, snemljive kole | Pnevmatske gume: 235/75 R17,5 | Skupna teža: 35.500 kg, nosilnost: 26.500 kg | Tehnična skupna masa: 41.500 kg | Prodaja samo pravnim osebam. | Pridržujemo si pravico do napak in predhodne prodaje. Kodpoy D Uriefx Ahkjlr

Stanje: rabljeno, skupna masa: 34.300 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, Leto izdelave: 2008, Oprema: ABS, PNEVMATIKE 205/65/R17.5 Kledpfxsy Dabpo Ahksr

Stanje: rabljeno, lastna masa: 6.900 kg, največja dovoljena obremenitev: 17.100 kg, prva registracija: 06/2010, naslednji pregled (TÜV): 02/2025, skupna širina: 25.500 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 245 / 70 R 17.5 / 6mm, velikost sprednje pnevmatike: 245 / 70 R 17.5 / 6mm, obratovalna teža: 24.000 kg,

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 5.802 h, Serien-Nummer: 3021013 Baujahr: 2013 - Betriebsstunden: 5.802 h Betriebsgewicht: ca. 7.200 kg Hubhöhe: ca. 5.000 mm Kipplast: ca. 4.200 kg Kabine mit Heizung Rückfahrkamera Radio-USB 3-ter Steuerkreis am Teleskoarm Klodpfx Ajyx N D Aehkor Faster-Kupplung hydraulischer Schnellwechsler Motorleistung: 74,5 kw Rangierkupplung mit Steckdose 7 Polig und Hydraulik Bereifung: 500/45 R 22,5 - Profil vorne und hinten ca. 14 mm Anbaugeräte: Schnellwechselplatte Änderungen, Zwischenverkauf und Irrtümer sind ausdrücklich vorbehalten. Die Beschreibung dient der allgemeinen Identifizierung des Fahrzeuges und stellt keine Gewährleistung im kaufrechtlichen Sinne dar. Ausschlaggebend ist die Beschreibung gemäß Kaufvertrag. Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 12/2017, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, skupna dolžina: 13.900 mm, skupna širina: 2.600 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 435/50R19,5, barva: drugo, Leto izdelave: 2017, Oprema: ABS, dvižna zadnja plošča, = Additional Options and Equipment = - EBS (Electronic Braking System) - Tail lift - Central lubrication = Remarks = Number of axles: 3, Unladen weight: 10,900 kg, Gross weight: 38,500 kg, Kingpin size: 2 inch, Central lubrication, Suspension type: full air, ABS, EBS, Body year: 2017, Side wall material: tarpaulin, Sliding roof, Axle type: BPW, Tail lift, Tail lift type: fold-under, Tail lift capacity: 2,000 kg, Tail lift manufacturer: D Hollandia, Tail lift material: steel and aluminium, Tail lift dimensions: 170x240, Battery for ramp, 4M EXTENDABLE / LAST AXLE STEERING / 2T TAILLIFT / LIBNER FULL OPENING CURTAIN = Further Information = General Information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 435/50R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 10 mm; Tyre tread right: 12 mm Axle 2: Tyre tread left: 9 mm; Tyre tread right: 7 mm Axle 3: Steering; Tyre tread left: 7 mm; Tyre tread right: 7 mm Weights Unladen weight: 10,900 kg Payload: 27,600 kg Gross vehicle weight: 38,500 kg Functional Tail lift: D Hollandia, fold-under, 2,000 kg Loading floor height: 110 cm Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Dutch roadworthiness test): inspected until 05.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering includes all European makes, years, and price ranges. Why buy from Kleyn Trucks? It’s simple! • Large, fast-changing stock • Recognisable quality • Good prices • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Professional technical services • The security of ‘recognisable quality’ • And more.... Please visit our website for special deals and the complete stock. Leasing via Kleyn Trucks is possible in most European countries! Easily calculate your lease rate and submit a request on our website. Klsdpewx Enqefx Ahkor Ask us directly about our European warranty package.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 12/2012, skupna dolžina: 13.860 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, medosna razdalja: 11.250 mm, barva: črn, Leto izdelave: 2012, 400 cm extendable. 3 x steering axle. Remote steering. Kodpfxowypatj Ahkolr Loading bed: 565 cm + 400 cm. Loading height: 45 cm. = Further information = Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Steered; Tyre tread left inside: 30%; Tyre tread left outside: 50%; Tyre tread right inside: 30%; Tyre tread right outside: 50% Rear axle 2: Twin tyres; Steered; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Rear axle 3: Twin tyres; Tyre tread left inside: 30%; Tyre tread left outside: 40%; Tyre tread right inside: 30%; Tyre tread right outside: 40% Weights Tare weight: 13,320 kg Payload: 34,680 kg Gross vehicle weight: 48,000 kg Identification Type number: MPG 3 / EXTENDABLE / LOW BED / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We make every effort to provide correct information, but no rights can be derived from the information provided.

Stanje: rabljeno, največja dovoljena obremenitev: 69.800 kg, skupna masa: 97.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2014, dolžina tovornega prostora: 19.800 mm, skupna širina: 2.750 mm, skupna višina: 2.900 mm, Oprema: ABS, Special low-bed trailer for long and heavy-haul transport. The low-bed deck offers a load area of approx. 7,700 mm, plus an additional 5,300 mm extendable. The low-bed deck can be rotated and converted into a platform (length 15,305 mm—extendable up to 20,605 mm). Loading height as a low-bed is approx. 420 mm; as a platform, the loading height is approx. 800/900 mm. The low-bed deck can be widened up to 3,200 mm. Axles: DOLL panther technology, double wishbone suspension with hydraulic damping, 12,000 kg per axle, fifth-wheel load 25,000 kg. Payload capacity up to approx. 80,000 kg, applicable only at reduced speeds. Dimensions without front dolly axles: length approx. 17,350 mm + 5,300 mm extendable. Unladen weight approx. 21,600 kg. Payload capacity up to approx. 69,650 kg, applicable only at reduced speeds. Current new price approx. EUR 460,000 net. SI85047 Our offer is generally without a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we are happy to provide a quote in cooperation with our partner workshops! The vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We would be pleased to provide a finance or leasing offer for this unit. Please contact us! Kodpfxoyad Rlo Ahkslr

Stanje: rabljeno, barva: zelen, Leto izdelave: 2017, Meusburger MTS-4. Leto proizvodnje: 2017. BPW osovine, 8 tona. Maksimalna dozvoljena masa: 50.000 kg. Opteretivost na selište: 18.000 kg. Produžava se za 4 metra. EBS, ABS, ALB sistemi. Twistlocks. Vazdušno ogibljenje. Treća i četvrta osovina su upravljačke (nachlaufachsen). Pocinkovan. Dimenzije: Dužina: 3950 mm Širina: 2550 mm Kedpsy Ay Uyefx Ahkslr Visina: 1100 mm Visina selišta: 1000 mm Pod: Dužina: 9600 mm Širina: 2550 mm Visina: 800 mm Gume: 205/65R17,5, 70% profil. Mega – Lowdeck! ID broj: 466. Opšti uslovi i odredbe Heinhuis-a primenjuju se na sve oglase, ponude i predračune Heinhuis-a, na sve ugovore zaključene sa Heinhuis-om i na pregovore koji im prethode. Odgovorom u bilo kom obliku prihvatate primenu opštih uslova i odredbi Heinhuis-a i izjavljujete da ste ih pročitali. Naše cene su neto izvoz cene. = Dodatne informacije = Godina proizvodnje: 2017 Dozvoljena ukupna masa: 50.000 kg Produživi okvir: Da = Informacije o firmi = Za više informacija: WhatsApp:

Stanje: rabljeno, Leto izdelave: 2016, Meusburger MTS-2 Baujahr: 2016 12-Tonnen-Gigant-Achsen Eigengewicht: 16.250 kg Zulässiges Gesamtgewicht: 43.000 kg Sattellast: 19.000 kg Ausziehbar um 5,4 Meter 2 x 25 cm verbreiterbar inkl. Aufsteckverbreiterungen EBS, ABS, ALB Zentralschmieranlage Funkfernbedienung Hydraulikversorgung über NATO-Anschluss vom Lkw Verschiebbare Abdichtungen + Schiebedach Hydraulisch abfahrbares Schwanenhals Hydraulische Federung Kodpfxey Ay Tij Ahkolr Hydraulisch um 2 x 1750 mm verbreiterbar Dach um 500 mm anhebbar Feuerverzinkt Servolenkung für 2 gelenkte Achsen Innenmaße Auflieger: Schwanenhals: L: 3.100 mm B: 2.550 mm H: 2.500 mm Ladeboden: L: 7.000 mm B: 2.550 mm H: 3.600 mm Bodenstärke: 230 mm Heck des Aufliegers: L: 2.800 mm B: 2.550 mm H: 3.000 mm Bereifung: 245/70R17,5, Profil ca. 80% ID-Nr.: 529 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Anzeigen, Angebote und Kostenvoranschläge sowie für alle von Heinhuis abgeschlossenen Verträge und den vorangegangenen Verhandlungen. Durch jede Form der Rückmeldung erkennen Sie die Geltung der AGB an und bestätigen, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2016 Leergewicht: 16.250 kg Zuladung: 26.750 kg zul. Gesamtgewicht: 43.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: Kledpfxeywv Ixe Ahkor -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: rabljeno, lastna masa: 10.500 kg, največja dovoljena obremenitev: 31.000 kg, skupna masa: 41.500 kg, konfiguracija osi: 3 osi, prva registracija: 10/2020, dolžina tovornega prostora: 9.950 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17.5, barva: siv, Leto izdelave: 2020, Oprema: ABS, With every used semi-trailer, you receive a current and complete inspection and function report. Frame: - Welded steel frame construction with front frame cranking and flat low-bed deck - Neck height 165 mm with external longitudinal beams for an extended low-bed - With Wirtgen chamfer on cranked deck approx. 850 x 65 mm - 2” king pin - Rear section support when used as a drive-on ramp Front wall: - Aluminium front wall with bevelled corners, 1,000 mm high - Interior front wall lined with aluminium tread plate 3/5 mm over the entire height and width - Mesh extension above front wall with 2 brackets for lashing chain hanging - Box for steering, electrohydraulic motor, and winch offset approx. 150 mm to the inside (steering and motor box stacked) Floor: - Grating 30/30/5 mm over the entire loading area in both low-bed and high-bed - If rear is foldable: 40/30/25/5 in the main frame - Longitudinal bearer in the direction of travel, 5 mm thick, 30 mm or 40 mm high - Grating laid over the longitudinal beams, flush with the outer frame Axles and tyres: - 3 x 10,000 kg BPW air suspension axles with S-cam brakes (300/200 mm), bellow diameter 360 mm - Rear axle is self-steering, automatically locks when reversing, and can be manually locked if required - 1st axle is a lift axle (operated via SmartBoard) - Automatic slack adjusters - Axle spacing 1,310 mm / 1,410 mm - Wabco SmartBoard with ECAS function - Air suspension with lift and lower valve - Tyres: 235 / 75 R 17.5 Kedpfxsywu Rfs Ahkjlr Foldable rear with extension: - Complete loading area behind the axle assembly can be hydraulically folded down - Drive-on ramps can be positioned on a solid concrete ramp and loaded over ramps (both with extended and retracted sections) - Load capacity of the folded rear section: - 10 t axle load (5 t wheel load) when used as a horizontal loading area - Can withstand 22 t when used as a drive-on ramp, if the rear support (underrun protection) is on the ground - Adjustable and foldable support leg - Support leg length designed for ramp loading at a ramp height of 1,100 – 1,300 mm - Operation via electro-hydraulic unit powered by NATO socket from the tractor unit - Pump unit mounted externally on the front wall via connection points - Separate radio remote control for operation of the lifting platform and foldable rear - Hydraulic controls installed in a stainless steel toolbox 500x350x400 mm, on the right side in the direction of travel before the axle assembly - Foldable rear can also be raised by approx. 60 degrees, thereby shortening the loading area by approx. 1,300 mm - Rear extension: hydraulically extending 3-piece rear section (approx. 800 mm wide each), extendable by approx. 2,000 mm, controlled via hydraulic pump unit Accessories included: - Hydraulically liftable ramp at the cranking for driving onto the high-bed across the entire vehicle width, rated for 6 t, no drive-over plate – instead, an angle piece is welded to the cranking - At the cranking: vertical scuff protection and top stop for precise positioning when raised - Ramp secured by holding valve - 9 lashing rings installed sunk upright along the center of the loading area in the direction of travel, plus 1 foldable lashing ring in front of the fifth wheel in the center - 1 pair of 8 t foldable lashing rings towards the front wall - 2 PVC toolboxes - Radio remote control for hydraulic lift/lowering functions of the lifting bed and foldable rear

Stanje: rabljeno, največja dovoljena obremenitev: 29.690 kg, skupna masa: 37.800 kg, konfiguracija osi: 3 osi, prva registracija: 12/2002, Leto izdelave: 2002, Oprema: ABS, Curtain-sided low-loader Meusburger MPG 3 Dimensions: Length 13.90 m, Width 2.55 m (extendable to 3.50 m with rear posts), Height 4 m Kedpowrvubsfx Ahkslr Loading dimensions: Platform height 80 cm, internal height in the low-bed area 3.20 m, low-bed to gooseneck height difference 67 cm, internal height in the gooseneck 2.53 m Condition: Good for its age Tyres: 205/65R17.5, tread depth 50-70%

Stanje: rabljeno, barva: modra, Leto izdelave: 2012, Meusburger MPS-3. Baujahr: 2012. 10 t BPW Achsen. Leergewicht: 12.500 kg. Zuladung: 32.500 kg. Kljdpfjynaf Ujx Ahker Gesamtgewicht: 45.000 kg. Sattellast: 15.000 kg. Sieben Meter ausziehbar. Hydraulik arbeitet über NATO-Anschluss vom Zugfahrzeug. Zentral-Schmiersystem. Funkfernbedienung. ABS, EBS, ALB. Höhenverstellbares Dach. Servolenkung, 3 Achsen gelenkt. Luftfederung. Twistlocks. Schiebedach. Innenmaße: L: 13.590 mm B: 2.490 mm H (innen): 2.900 mm H (Boden): 1.120 mm Bereifung: 235/75R17,5, 60 % Profil. Sehr schöner Auflieger! ID-Nr.: 614 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Offerten von Heinhuis, sämtliche mit Heinhuis abgeschlossenen Verträge sowie die ihnen vorausgehenden Verhandlungen. Mit jeglicher Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen an und bestätigen, dass Sie von deren Inhalt Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 12.500 kg Zuladung: 32.500 kg zGG: 45.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster Ksdpfx Ahsxnnk Dskelr - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Kljdpfx Ahexgm S Doksr Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm Kodpewviwksfx Ahkolr - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection Klodjwu Agiopfx Ahker

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate - Hydraulic drop-down supports at rear Kjdowu A Slepfx Ahkslr Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: - 2x on gooseneck Kodsxnym Depfx Ahkelr - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection