Faymonville Telemax Flatbed Semi Trailer W/ 27 Meter Extension nakup rabljenega (46.421)

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: Gedpfx Aaey Auhue Hsiw * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Giodpoy Aufmofx Aa Hew Steel construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) Gisdpfx Aoyvnfgoa Hjw * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: Gsdpjma Hf Refx Aa Hsiw • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs Giedpfx Aajiu Er As Hew - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Gedpfx Aajyhkqzj Hjiw Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Giedpfx Aasw Tpq Dj How Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Gooseneck * Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Loading Area * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood floor approx. 48 mm thick, chequered plate overlay above axles * Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN) Axles * BPW axles and suspension, all axles hydro-mechanically steered Gsdpfow Tprzsx Aa Hsiw * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tools Tyres: * 245/70 R 17.5, load index (146/146 F) * Make of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity) Brake system: * Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Paint finish: First class and durable corrosion protection * High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red. * Rear section metallised and painted in RAL 9010 (pure white) Steel construction: Steel structure made of high-strength fine-grained steels. * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Hot-dip galvanised steel bulkhead, approx. 400 mm high * Yellow-red air couplings on the galvanised front terminal strip * Spare wheel carrier in front of the bulkhead * Electro-hydraulic power unit * Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit) * Recess at the rear of the gooseneck for aluminium approach ramps * Anchor rail for aluminium approach ramps at the rear of the vehicle * Galvanised folding supports under the loading area rear chamfer * Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H) * Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanised toolbox integrated in the chamfered gooseneck * 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container * 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame * Galvanised extensions, extendable by approx. 230 mm per side * Sliding anchor rails for aluminium approach ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection * 2 LED reversing lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version Gijdpfx Aasu Sd U Us How * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Gedpfxjyhkrro Aa Hsiw Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902027997, lastna masa: 6.832 kg, največja dovoljena obremenitev: 28.168 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, dolžina tovornega prostora: 13.460 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, skupna dolžina: 15.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: črn, These images are archive photos; the vehicle may still be in use! Equipment details available on request. Gedpfowk Dg Njx Aa Hoiw

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024321, lastna masa: 5.765 kg, največja dovoljena obremenitev: 29.235 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2018, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.470 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", stanje pnevmatik: 100 odstotek, barva: črn, The images are for reference only; the vehicle may still be in use. Giodpfxewk Dk Ij Aa Hew Equipment details available upon request!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902024358, lastna masa: 6.149 kg, največja dovoljena obremenitev: 28.851 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: modra, The images shown are archive photos; the vehicle may still be in use! Chassis Semi-trailer Haulage Fine-grain steel welded construction, fifth wheel plate with interchangeable 2" kingpin Outer frame slightly inclined with 'Load-Lock profile' for lashing strap attachment Note! To hook in the straps in conjunction with drop sides, the side walls must be opened! Pair of lashing eyes additionally flush-mounted in the outer frame, each rated to 2.5 t 24 t, two-speed landing gear, single-sided operation, with straight lower section, without compensating mechanism Pull-out ladder at rear Side door retainers Wheel chocks with holder Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free landing leg corner dimension or rearward swing clearance approx. 1930 mm Rear underrun protection, steel, galvanized Full-width rear mudflap Half-shell fenders With anti-spray mudflap only on the last axle Rear collision protection 'Blocker' – transverse galvanized steel angle as forklift and rear door hinge protection Pair of ferry rings, yellow marked Pallet stops on both sides, approx. 15–20 mm high, bolted design (loading height reduced by approx. 15–20 mm) Spare wheel holder for one spare wheel, complete with fixing kit, basket design by Schoch! Spare wheel, same make as original tyres, steel rim Stainless steel toolbox, w=600/h=400/d=500 mm, with polished, lockable door Stake pockets Right side: 5 rows of aluminium V-insert slats Left side: no insert slats Rear wall / Rear corner posts Rear corner posts steel, up to roof edge, lashing for tarpaulin with round tubes and tensioning ratchet Giodpfswyiw Ejx Aa Hew Rear portal doors, double-leaf, each with 2 internal bar locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Quick Lock system for side curtain with central locking, one-sided on left Tension locks in stainless steel on right duty-free cable all around, with holder on front wall (no customs lock, not in conjunction with Quick Lock) Customer branding on side curtains and rear portal Tarpaulin with high-strength built-in spring steel strips, left side (note: no insert slats on left when equipped) Roof Sliding roof, rear end lift-up, can be pushed open front-to-rear, tarpaulin colour: white EcoLift – lifting roof, raisable by approx. 380 mm on both sides, with gas strut assistance, Optimum rear rain rail, top of rear bow, above doors Paintwork Frame: hot-dip galvanized with passivation Landing legs: black coated Front corner posts: galvanized and painted to front wall colour Front wall: MB 5328 blue Rear corner posts: galvanized and painted to rear wall colour Rear wall: MB 5328 blue Tarpaulin: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images shown are archive photos; the vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339HD392852, lastna masa: 6.290 kg, največja dovoljena obremenitev: 32.710 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.840 mm, skupna širina: 2.550 mm, skupna višina: 40.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: siv, multiple units available The images are archive photos; the vehicle may still be in use! Chassis Semi-Trailer Forwarder Fine-grained steel welded construction 24 t landing gear, single-sided operation, with semi-circular lower part and straight mounting plate, with compensating slide Extension ladder at the rear Godpfxswyiyge Aa Heiw Side door holders Half-shell mudguards over all axles Anti-spray mud flaps behind the 3rd axle 2 buffer bumpers at the rear 1 large plastic toolbox mounted on the right front side and 2 smaller plastic toolboxes mounted on the left front side Perimeter tarpaulin rope with 2 holders on the front wall (not customs sealed) Axles + Suspension SAF disc brake axles Air suspension Brake system 2-line compressed air braking system Spring-loaded parking brake 2 foolproof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure ABS functionality! With raise and lower valve Vehicle – Drive stability system Wheels and Tires 385/55 R22.5" brand at manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin foolproof sockets at the front, without connection cable Front wall / Corner posts 2 x 580 mm high, corner posts steel in volume design, release device for side tarpaulin at the front wall Rear wall / Corner posts Rear steel corner posts up to the lower edge of the roof, hooks for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, double-winged, each with 2 internal locking rods Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, end lift rear foldable, roof can be shifted from rear to front multiple units available The images are archive photos; the vehicle may still be in use!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029406, lastna masa: 5.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: srebrn, The photos are archive images; the vehicle may still be in use! Chassis: Semi-Trailer for Haulage Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil well approx. 8,040 mm long, 6 coil supports (coil pockets internal dimensions 82 x 52 mm), coil well cover with multiplex boards and steel crossmembers, 2 slit coil covers for the coil well, each approx. 293 mm wide, unladen weight approx. 13 kg per cover, outer frame slightly sloped with "Load-Lock profile" for attaching tie-down straps. Note: To attach straps in combination with side walls, the side walls must be opened! 9 pairs of recessed lashing rings, each rated at 5 tons, in the area of the coil well. 24-ton two-speed landing gear, single side operation, with straight lower part, without compensating slide. Note: Free landing gear foot clearance, or free rear swing radius approx. 1,930 mm, without supports. Retractable ladder at the rear, door retainers on sides, 2 wheel chocks with holder, aluminium side underrun guard, holder mounted transversely and on the chassis main beam for supporting aluminium planks, rear underrun protection in aluminium, half-shell fenders with anti-spray flaps compliant with EU regulations, rear impact protection, 1 plastic toolbox, 2 pairs of stanchion pockets integrated in the outer frame, approx. 72 x 42 mm internal dimensions in positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 19219. 2 stanchion pockets centrally embedded in the floor, approx. 72 x 42 mm internal dimensions on positions 1 and 2 as per old Fliegl stanchion data sheet, as with AU 192198. Note: Stanchion pockets / plug-in stanchions are not designed for stand-alone load securing of long materials, pipes, etc. without lashing. Gedowhp A Dspfx Aa Hjiw Axles & Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-measured" for reduced tyre wear and fuel consumption. Axle spacing offset 1410/1310 mm (combined transport), up to 44-ton total combination weight. Air suspension, without lift axle. The photos are archive images; the vehicle may still be in use!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33901014232, lastna masa: 5.900 kg, največja dovoljena obremenitev: 29.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, dolžina tovornega prostora: 13.650 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 2.638 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", barva: srebrn, The images are archive photos! The vehicle may still be in use! Chassis: Semitrailer for Freight Forwarding Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin Drive-over and suitable for use with construction/agricultural machinery up to max. 24,000 kg GVW and up to a maximum machinery width of 2480 mm (the track width of machines or vehicles to be transported must not exceed 2200 mm), hook-in bar for aluminium ramps at the rear (wider construction/agricultural machinery must not be loaded) Outer frame in new slightly angled design with "Load-Lock Profile" for lashing strap attachment 14 pairs of recessed lashing rings in the outer frame, each rated at 2.5 t 6 pairs of recessed lashing rings in the outer frame, each rated at 5 t 24 t, 2-speed landing gear, single-sided operation, with straight base, without crossbar equalizer Free landing gear foot dimension or free swing radius to the rear approx. 1920 mm Rear support foldable 2x wheel chocks with holder Side underrun protection aluminium Rear underrun protection steel Quarter mudguards in front of and behind each axle With anti-spray splash guards behind each axle 1x spare wheel holder for 1 spare wheel, with fixing kit 1x spare wheel, same make as standard tires, steel rim Axles + Suspension SAF drum brake axles "Axle/chassis laser alignment" - reduces tire wear and fuel consumption Air suspension 1st axle is an automatic lift axle, additionally electronically controllable from the truck, incl. forced lowering and starting aid, no installation required on the truck (starting aid functions up to an axle overload of 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system Color-coded piping for easy maintenance Spring-actuated parking brake 2 foolproof coupling heads front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Important: The drawbar trailer may only be towed by tractor units that ensure the effectiveness of ABS! With lift & lower valve Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via tractor unit's screen via EBS, no truck installation (requirement must be met by the tractor unit. Only for standard tires) Wheels and Tires 235/75 R17.5 twin tires Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side amber LED lighting Side amber LED lighting connected to indicators "flashing side markers" 2 white LED position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin foolproof sockets at the front, without connecting cable Floor Phenolic plywood panels approx. 30 mm thick, for high point load capacity, forklift axle load up to max. 5,600 kg Front wall / Front corner posts 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions steel, volume design Giodoxb D Swopfx Aa How Front wall additionally covered on inside with 1,250 mm high phenolic plywood panel Frame hot-dip galvanised The images are archive photos! The vehicle may still be in use!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902036561, lastna masa: 5.820 kg, največja dovoljena obremenitev: 29.180 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.740 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5", barva: rdeča, The images are sample/archival pictures! The vehicle may currently be in use! Tarp color freely selectable Chassis: Semi-Trailer Forwarder Fine-grained steel welded construction in lightweight design, fifth wheel plate with exchangeable 2" kingpin Slightly angled new design outer frame with "Load-Lock profile" for lashing strap attachment 3 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 14 pairs of additional lashing eyes recessed in the outer frame, each rated 2.5 t 24 t 2-speed landing gear, one-sided operation, with straight base, load equalizing type: SAF Note: Free landing gear foot spacing or free rear swing radius approx. 1930 mm Extendable rear ladder Side door holders 2 wheel chocks with holders Side underrun protection, aluminum Painted in RAL 3002 Carmine Red No warranty for coating/lacquering quality on repainted or coated attachments. Rear underrun protection, galvanized steel Painted in RAL 9010 Pure White, including rear underrun protection brackets No warranty for coating/lacquering quality on repainted or coated attachments. Quarter shell mudguards in front of and behind axle assembly With anti-spray mudflaps according to EU regulations Rear crash protection 1 aluminum ladder approx. 2550 mm, with side holder, behind side underrun protection Mounting rail on outer frame for direct tarp tensioners, bolted design, stands approx. 15–20 mm above loading surface, upper section with perforated profile for lashing straps, load-lock side rail must remain usable (since no lashing eyes). With bottom aluminum drop-in slat usable as stopper! (not in conjunction with sideboards) 2 plastic toolboxes, w = 800 / h = 450 / d = 450 mm 1 each on front left and right, behind the 3rd axle Axles & Suspension BPW disc brake axles with 430 mm disc diameter Wheel hubs painted in RAL 3002 Carmine Red "Axle/chassis laser alignment" to reduce tire wear and fuel consumption Air suspension Brake System 2-line compressed air brake system Color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connector line 24 Volt EBS, manufacturer Wabco, electronic brake system with EBS socket at the front, without connection cable Attention: This trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! With lift & lower valve + auto-reset function Vehicle stability control system Telematics Idem Telemetry incl. LIN battery, coupling sensor and GPS (no contract included, customer must arrange contract). Wheels & Tires 385/65 R22.5, manufacturer as selected by the supplier Polished aluminum rim, make Alcoa Dura-Bright Electrics 24 Volt, multi-chamber lighting units, side yellow LED lighting Lamp carrier painted in RAL 9010 Pure White No warranty for coating/lacquering quality on repainted or coated attachments. 2 white marker lights at the front 2 white/red lane marker lights at the rear Gsdsxbzkkopfx Aa Hoiw 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connector cable LED working lights on both sides (controlled via reverse light), positioned at height of first cross-member behind landing gear 2 additional LED working lights at the rear, controlled via reverse light Tarp Tarp with welded horizontal and vertical belts Customer branding possible on tail portal, tarp color freely selectable

Stanje: rabljeno, številka stroja/vozila: YAFTL208100007948, konfiguracija osi: 2 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.010 mm, Leto izdelave: 2008, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Bobnasti zavorni sistem = Dodatne informacije = Teže Lastna teža: 11.660 kg Nosilnost: 26.340 kg Gsdpfx Aaoziivwj Hoiw Dovoljena skupna masa: 38.000 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik spredaj: 70% Sprednje pnevmatike: 245/70 R17.5 Zadnje pnevmatike: 245/70 R17.5 Zadnji pregled: 29.06.2026 Dodatne informacije Za več informacij se obrnite na Lastas Sales.

Stanje: novo, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 24.800 mm, skupna dolžina: 130 mm, skupna širina: 24.800 mm, barva: bela, Leto izdelave: 2024, = Dodatne možnosti in oprema = - Listnato vzmetenje = Opombe = 3-osna kasonka CIMC je robustna in vsestranska prikolica za prevoz velikih, težkih ali nepravilno oblikovanih tovora. S tremi osmi ta prikolica zagotavlja odlično stabilnost in nosilnost, ki je nepogrešljiva pri transportu gradbenih materialov, strojev, kontejnerjev in drugega težkega tovora. CIMC je znan po inovativni konstrukciji in zanesljivih izdelkih, pri čemer 3-osni nizkopodni polpriklopnik ni izjema. Giedpfoy Rt R Dox Aa Hsw Specifikacije: - Število osi: 3 osi za dodatno stabilnost in večjo nosilnost. - Nosilnost: do 60.000 kg za različne namene. - Šasija: Izdelana iz visokokakovostnega jekla za maksimalno trdnost in vzdržljivost. - Nadgradnja: Raven pod brez dvignjenih robov. - Vzmetenje: Mehanski ali zračni sistemi za stabilno vožnjo in boljšo porazdelitev tovora. Značilnosti in prednosti: Visoka nosilnost: - 3-osna konfiguracija omogoča odlično porazdelitev teže in poveča zmogljivost nakladanja. - Idealno za težke in voluminozne tovore, kot so gradbeni stroji, kontejnerji in industrijska oprema. - Trpežna izdelava: Šasija je iz kakovostnega jekla, zato prikolica prenese zahtevne pogoje dnevne uporabe. - Napredna tehnologija varjenja zagotavlja robustno in zanesljivo konstrukcijo ter znatno podaljša življenjsko dobo prikolice. Uporaba: 3-osni nizkopodni polpriklopnik CIMC je idealen za naslednje aplikacije: - Gradbeništvo: transport težkih gradbenih materialov, strojev in opreme - Logistika in distribucija: prevoz kontejnerjev, palet in nepravilnega tovora - Naftna in plinska industrija: transport težke in obsežne opreme - Avtomobilska industrija: prevoz vozil in velikih strojev Dimenzije: D. 12.500 mm Š. 2.480 mm V. 1.200 mm Teža: 8.400 kg ± 5 % Ta 3-osna kasonka CIMC predstavlja robustno in fleksibilno rešitev za podjetja, ki potrebujejo vsestransko in zanesljivo prikolico za prevoz težkih in nestandardnih tovorov. Odlična stabilnost, dolga življenjska doba in prilagodljivost različnim tovorom so prednosti, ki to prikolico naredijo dragoceno pridobitev za vsak vozni park. Samo za izvoz zunaj EU. = Dodatne informacije = Dimenzija pnevmatik: 315/80 R 22,52 Znamka nadgradnje: CIMC ZJV9403JP Splošno stanje: zelo dobro Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Poškodbe: brez = Dodatne informacije = Letnik: 2024 Lastna teža: 8.400 kg Nosilnost: 60.000 kg Dovoljena skupna masa: 68.400 kg Prodajna cena: € 24.900, US$ 28.340

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339EH344092, lastna masa: 5.500 kg, največja dovoljena obremenitev: 33.500 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", barva: rjava, The images shown are archive photos; the vehicle may still be in operation! Chassis - Rear wall bumpers left and right - Extension ladder at the rear - Jost landing legs - Underride guard with lamp panel - Side door holders - 3 pairs of mid-stakes Axles - SAF axles Godpfswyixiex Aa Heiw Wheels and Tires - 385/65 R22.5" tires - Mudflaps behind the third axle - Fenders in front of the first and behind the third axle Accessories (quantities may vary) - ADR hazardous goods warning sign - A-board - 1 shovel with holder - 2 toolboxes - 1 pallet box - 1 document box Tarp - Side tarp - Edscha Trailer Systems sliding roof Direct tarp tensioners Insert slats, aluminum (quantity may vary) The images shown are archive photos; the vehicle may still be in operation!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 7.217 kg, največja dovoljena obremenitev: 31.783 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.475 mm, višina nakladalnega prostora: 2.670 mm, prostornina tovornega prostora: 90 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: bela, Leto izdelave: 2022, Oprema: ABS, Object number #28844 Coil trough 9,000 mm Schmitz axles Disc brakes Tyres 385/65 R 22.5 Body inner dimensions: 13,620 x 2,475 x 2,670 mm Portal doors double internal locking bars Sliding curtain Sliding roof External lashing frame 5 pairs of 4t lashing eyes 11 pairs of 6t lashing rings Schmitz Safety Roof Lifting/lowering function ABS/EBS Forklift accessible, 5,460 kg Side underrun protection Gjdpfoq T Rgfsx Aa Hsiw Jost landing gear Load securing certificate EN 12642 XL Load securing certificate for coil transport Beverage transport certificate Leasing or financing available on request!!!

Stanje: rabljeno, lastna masa: 6.720 kg, skupna masa: 35.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2010, naslednji pregled (TÜV): 03/2027, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 425/65 R22,5, medosna razdalja: 2.000 mm, Oprema: ABS, Colour: RAL 6416 turquoise green EBS (Electronic Braking System) Disc brakes Payload: 28,280 kg Gisdpoww Ixcofx Aa Hew BPW axles: 2 x 10,000 kg, both with forced steering Lifting and lowering device Fixed underrun protection 10 pairs of stake pockets Aluminium floor 2 pairs of container locks Subject to errors and omissions.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 9.000 kg, največja dovoljena obremenitev: 21.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2009, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 285.70 r 19.5, barva: rdeča, Leto izdelave: 2009, Oprema: ABS, SEM Eichkorn 2-axle disc trailer with tridec hydraulic steering, extendable from 13.80m to 21.35m, EXTE lateral stanchion seats for timber/log transport, supplied with exte posts, twistlock fittings for 40-foot container transport, year 2009, lateral RUD hooks, 4 removable and openable aluminium side panels with 70cm height, EBS, vehicle already registered in Italy. DEALER: INTERDRIVE SRL-PARMA Gjdsrum A Topfx Aa Hjiw

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339PH522406, lastna masa: 8.520 kg, največja dovoljena obremenitev: 30.480 kg, skupna masa: 39.000 kg, prva registracija: 01/2024, dolžina tovornega prostora: 13.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, barva: rumena, Leto izdelave: 2024, Oprema: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forced-steered Vehicle identification number: VAVJS1339PH522406 Mileage: 7,700 km - Gsdpfx Aasxq S H Is Hoiw Weights Gross weight (technical): 39 t Axle group load (technical): 27 t Kingpin load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm FRAME - welded steel frame construction - reinforced for 20 t load concentration over 4 m loading length - frame height at front approx. 230 mm - interchangeable 2" kingpin - frame for unladen fifth wheel height approx. 1,120 mm to 1,200 mm with air-suspended tractor unit - 4 mm perforated outer frame with hole spacing approx. 100 mm, elongated hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, also can be folded outward - 8 pairs of box section inserts with plug-in fixtures for 80x80 mm stanchions, both sides of the outer frame - 6 box section inserts with plug-in fixtures for 80x80 mm stanchions, across entire width, max. tensile force 2000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axle with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Self-acting forced steering, front fifth wheel turntable with steering wedge - Transmission via two steering rods, axle mounting at rear with bogie - Central lubrication points for steering at front fifth wheel turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on load, start-off aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensing - RSS/RSP stability program - Spring brake parking brake on 2 axles - Aluminium air reservoirs - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle group load, brake diagnosis, etc.) FLOOR - 27 mm phenolic plywood floor with steel hat-profile rails over the longitudinal members - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard rail bolted both sides to the outer frame - Aluminium forklift guard rail at rear crosswise - Closed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, for loads up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel toolbox / lid painted in single colour - 8 removable hardwood cross beams approx. 100/100 mm, with steel edging, can be fixed in plug-in fixtures in the outer frame Very good condition, German registration papers, immediately available.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 39.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2014, Oprema: ABS, Spoštovani, na voljo je 10 prikolic KRONE Mega Lowliner za prodajo. Prva registracija 2014, notranja višina 3 metre, dvižna streha, Edscha ponjava na obeh straneh, letvica za palete na obeh straneh, Multilock, CODE XL. Pnevmatske gume z več kot 60% profila. Godpfx Aexpnxkja Heiw