Faymonville 5-Achs-Doppel-Tele-Semi-Sattelauflieger nakup rabljenega (44.029)

Stanje: rabljeno, številka stroja/vozila: YAFSR31200001xxxx, Leto izdelave: 2012, Prosimo, na zahtevo navedite referenčno številko: 23457 Itedpfx Agszqlx Rs Esk Tehnične specifikacije: Letnik modela: 2012 EU-odobritev velja do: 28.02.2027 3 osi Dolžina: 1325 cm Neto teža: 12.178 kg Dovoljena največja masa: 59.000 kg 12-tonske osi Vrtljive na vseh osi Pripravljeno za dostavo Opis: 2012 Faymonville Telemax prikolica s platformo, s skupno dolžino 27 m v popolnoma iztegnjenem stanju. Podaljšek znaša 14 metrov. Pripravljeno za dostavo. Tehnični pregled: Da EU-odobritev velja do: 28.02.2027 Lastna teža: 12178 Skupna teža: 59000 Model: telemax prikolica s platformo, z 27-metrskim podaljškom = Dodatne informacije = Za dodatne informacije se obrnite na ATS Norway.

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: Itedexgm S Dopfx Ag Esk - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: rabljeno, prevoženi kilometri: 599 km, moč: 530 kW (720,60 KM), število postelj: 6, vrsta goriva: dizel, vrsta prenosa: samodejen, barva: rumena, prva registracija: 08/2026, skupna dolžina: 12.000 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, konfiguracija osi: 2 osi, skupna masa: 18.000 kg, Leto izdelave: 2026, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, garancija za rabljena vozila, klimatska naprava, kopalnica, navigacijski sistem, parkirni grelec, pogon na vsa štiri kolesa, EOM 6200 EXKLUZIVNO TERENSKO VOZILO – Najboljše luksuzno vozilo za ekspedicije. Mercedes-Benz Arocs 2053 4x4. Cena: € neto. Izdelano brez kompromisov. EOM 6200 je bil zasnovan za stranke, ki iščejo nekaj izjemnega. Ne glede na to, ali gre za puščavo, gore ali polarne regije – to vozilo združuje brezkompromisno terensko zmogljivost s komfortom luksuznega apartmaja. Vsaka podrobnost je izdelana z največjo natančnostjo. Ne gre za serijsko vozilo, temveč za ekskluzivni unikat. Izstopajoče lastnosti:* Mercedes-Benz Arocs 2053 4x4 * Novo vozilo * Ekskluzivna vrhunska nadgradnja * Najkakovostnejše pohištvo in materiali Itedpszc Tx Dofx Ag Eek * Luksuzna kopalnica * Popolnoma opremljena kuhinja * Prostorna življenjska cona * Udobna spalnica * Najsodobnejša elektronika * Velike zaloge vode in energije * Zasnovano za avtonomno potovanje * Najvišja terenska zmogljivost Za stranke, ki ne poznajo meja. EOM 6200 je odlična izbira za:* Podjetnike * Zbiratelje * Popotnike po svetu * Avanturistične ekspedicije * Potovanja po puščavah * VIP stranke * Vladne in korporativne stranke Narejeno za svet. Ne le avtodom. Mobilna luksuzna rezidenca. Investicija v svobodo. Vozilo, ki lahko doseže skoraj vsak cilj. EOM – EKSKLUZIVNA PROIZVODNJA TERENSKIH VOZIL. Luksuz brez omejitev.

Stanje: rabljeno, skupna masa: 133.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2023, Oprema: ABS, Trailer - Vehicle Identification Number: XNJ55H5XX23H01262 - First registration: 29.11.2023 DOLLY - Vehicle Identification Number: XNJ33H5XD23H01262 - First registration: 29.11.2023 POWER HYDRAULICS with NATO socket – or machine hydraulics German registration Iodpsx Ialvjfx Ag Estk Unladen weight: Trailer: 27,140 kg | DOLLY: 13,200 kg Fifth wheel height: 1,350 mm – Replaceable kingpin – 3.5" Front swing clearance approx. 1,732 mm ---- Hydraulic, detachable and height-adjustable swan neck – Length 4,020 mm Lowbed: Length: 8,000 mm Width: 2,870 mm – Loading height: approx. 560 mm TELESCOPIC extension by 5,800 mm EXPANDABLE up to 3,240 mm Chassis frame: Length: 7,410 mm Width: 2,750 mm – Loading height: approx. 1,100 mm Total length with dolly: 24,622 mm / without dolly: 20,140 mm Excavator trough - dipper stick recess Central lubrication system BROSHUIS axles – PENDLE AXLES with drum brakes with radio remote control 5 x hydraulically suspended and forced-steered axles Axle loads: 5 x 12,000 kg Maximum fifth wheel load: 25,000 kg Tyres: 285/70 R 19.5 – Tread depth approx. 10 mm throughout Matching 3-axle DOLLY Hydraulically suspended axles Modifications, prior sale, and errors expressly reserved. The description serves for general vehicle identification and does not constitute a guarantee in the legal sense. The contractual vehicle specification is binding. Our offer is generally without new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or decals. Our general terms of delivery and payment apply.

Stanje: rabljeno, lastna masa: 14.995 kg, največja dovoljena obremenitev: 50.805 kg, skupna masa: 65.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2023, obratovalna teža: 14.995 kg, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear bevel, approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading platform: - Extendable loading platform with rear bevel, approx. 500 mm x 8° - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 4 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) - 1 intermediate section, 250 mm - Cut-outs in the outer frame of the loading area for inserting tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, chequer plate over the axles Axles and tyres: - BPW axles with hydro-mechanical forced steering - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Axle tools - Tyres 235/75 R17.5 Braking system: - Braking system according to EU regulations with EBS-E (4S3M) Accessories included: - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings mounted on the galvanized connection strip at the front - 4 chocks with holders on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic power unit - Remote steering from front and rear via cable remote control with push buttons, including single-track control of the axles - Mounting for ALU ramps at the rear of the gooseneck - Hot-dip galvanized, extendable side extensions, approx. 230 mm per side - European reflector boards (red-yellow) at the rear of the trailer - White reflective tape as per EU standards on the sides, on the extension, and red at the rear - Bracket for warning signs on left/right of gooseneck and rear panel, incl. socket - Galvanized folding supports under the loading platform’s rear bevel - Holder for a beacon at the rear of the trailer - Central lubrication system with 2 BEKAMAX (Pico) pumps, NLGI-2 standard grease and removable cover for the pump - Mud flap at the rear of the trailer - Manual and documentation - On the gooseneck: insertable ALU side boards and rear wall, approx. 2,440 x 400 mm - Removable galvanized stanchions at the rear (body length approx. 2,560 mm) - 4 pairs of WADER container locks recessed in the loading platform for 1x 20ft, 2x 20ft, 1x 40ft, or 1x 45ft container - 8 pairs of pockets for removable stanchions, 100 x 50 mm, in the outer frame of the loading platform - Adjustable hook rails for ALU ramps at the rear of the vehicle Itodpfev Hr Axsx Ag Eek - Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition - Four warning panels, extendable approx. 400 mm, approx. 423 x 423 mm, each with position lamp - Mounting on warning panels for beacon - Radio remote control for remote steering in addition to cable remote control, with indicator lights on the receiver for single-track control - Painted-in sand layer on chequer plates, above the king pin and on the loading area for anti-slip protection - 80 km/h speed limit decal at the rear - Load pressure gauge for axle load determination, including load chart

Stanje: rabljeno, največja dovoljena obremenitev: 84.000 kg, skupna masa: 105.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2000, Oprema: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 Iodpfxsx Txlls Ag Eotk HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg RO HU due Gooseneck: 3,900 mm Saddle height: 1,350 - 1,450 mm Low bed: Length: 13,550 mm (600 mm of which tapered) -- Width: 3,000 mm -- Loading height: 920 mm TELESCOPIC (with sliding table - 500 mm) Insertable rails Axle loads technical: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTABLE Axles 2, 3, 4, 5, 6 = FORCED STEERED Tyres: 9.5 R 17.5 We expressly reserve the right to make changes, prior sale, and errors. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sale of goods. The details in the purchase agreement are binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops! The vehicle may be labelled and/or branded for advertising purposes. Our general delivery and payment terms apply.

Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg Lastna masa: 12.060 kg Nosilnost: 34.440 kg Skupna dolžina: 13.550 mm - 26.550 mm Širina: 2.550 mm Dodatne informacije: - 3 osi, hidravlično prisilno krmiljenje - priključek za nadstandardno dolge tovornjake - palica za pritrditev rampe - priključni elementi za nakladalno površino - dvojna teleskopska konstrukcija, raztegljiva do 26.550 mm - orodjarna na prikolici - električno vodeno kolo - možnost namestitve dodatnih širitev - hidravlična funkcija za dodatno krmiljenje, upravljanje na daljavo - velik komplet pritrdilnih pasov - lastna hidravlična črpalka Itedpfx Agoycpbno Eok Na voljo so tudi drugi novi in rabljeni prikolice za nadstandardne tovore. Dodatne informacije najdete na:

Stanje: rabljeno, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2007, Oprema: ABS, Vehicle Identification Number: XL942N5SA7L007207 Fifth-Wheel Load: 18,000 kg – Axle Loads: 4 x 10,000 kg Unladen Weight: 11,020 kg German MOT (HU) due Neck Length: 4,100 mm Coupling Height: 1,250 – 1,400 mm = Fifth-Wheel King Pin 3.5 inches Lowbed: Length: 9,400 mm, including 500 mm sliding table (600 mm of which is tapered) – Width: 2,525 mm – Loading Height: 880 mm Isdpoy T Aq Eefx Ag Eetk TELESCOPIC EXTENSION by 6,300 mm EXTENDABLE WIDTH up to 3,000 mm Removable Rails Technical Axle Loads: 4 x 10,000 kg SAF Axles with Drum Brakes Axle 3,4 = SELF-STEERING AXLES Large Tool Box on the Gooseneck Central Lubrication System Tires: 245/70 R 17.5 Modifications, sale prior to conclusion of purchase, and errors are expressly reserved. The above description is provided for general identification purposes only and does not constitute a warranty under the law of sale. The description in the purchase contract is decisive. Our offer does not generally include a new TÜV (MOT) inspection. If a new inspection is required, we are happy to provide a quote from one of our partner workshops! The vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, prevoženi kilometri: 277.000 km, moč: 331 kW (450,03 KM), število postelj: 6, število sedežev: 4, vrsta goriva: dizel, vrsta prenosa: samodejen, barva: zelen, prva registracija: 09/2012, naslednji pregled (TÜV): 10/2026, skupna dolžina: 12.000 mm, skupna širina: 2.500 mm, skupna višina: 4.000 mm, konfiguracija osi: 2 osi, emisijski razred: Euro 6, skupna masa: 18.000 kg, lastna masa: 15.000 kg, obratovalna teža: 15.000 kg, največja dovoljena obremenitev: 3.000 kg, Leto izdelave: 2012, Oprema: ABS, centralno zaklepanje, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, tempomat, vgradna kuhinja, Luxury Liner on Mercedes Actros 18/450 – Mobile Motorsport HQ or Exclusive Motorhome Ijdpfjyuzxiex Ag Estk This impressive luxury liner combines the robust engineering of a Mercedes Actros with the comfort of a premium motorhome. The base vehicle is a 2012 Mercedes Actros 18/450. The living unit was completely rebuilt in 2018. At the time of conversion, the vehicle had a mileage of 211,000 km, currently around 270,000 km. This mileage is in no way an issue for an Actros. All maintenance has been carried out regularly by Mercedes. Measuring 12 meters in length, 2.50 meters in width, and 4 meters in height, this liner offers exceptional space. The green metallic paint and new black alloy wheels with new tires provide a striking appearance. A special highlight is the spacious rear garage with integrated workbench. Measuring 3 x 2.45 m, it offers ample room for 4 to 5 large motorcycles or extensive motorsport equipment. This makes the vehicle ideally suited as a mobile racing headquarters. The living area is expanded via a 5-meter hydraulic slide-out. When extended, it creates an exceptionally spacious living space that includes an integrated kitchen with induction cooktop, dishwasher, and microwave. Entertainment is provided by a high-quality Dolby Surround home cinema system with two televisions. Sleeping accommodations for up to 6 people are available. The vehicle is registered for 4 people with forward-facing seats. The liner is extremely well equipped for longer self-sufficient stays: - 1000 liters fresh water - 600 liters grey water - 250 liters toilet tank - 450 liters diesel - 8 kW generator - 6 x 250 Ah gel batteries plus vehicle batteries - Electronic tank displays on a central panel Heating is provided by a diesel-powered auxiliary heater with water circuit and radiators in both the living and bathroom areas. Additionally, there is an electric heater and air conditioning available. Further features: - Hydraulic leveling supports - 7 x 5 m awning - Outdoor kitchen with refrigerator and coffee machine - Outdoor TV - Freezer compartment in the kitchen - Underbody sealed against salt - New retarder water cooler - Certified for 100 km/h An extraordinary luxury liner for motorsport, events, or luxurious travel, with plenty of space, advanced technology, and self-sufficiency. VAT deductible. Net price negotiable: €415,000 A 3D tour, videos, and detailed photos are available to seriously interested parties upon request. The vehicle can be viewed by appointment in 5524 Austria. (Partial) financing, warranty solutions, and insurance are part of Motorhome Depot’s all-inclusive care package. This is a private sale on consignment. No returns or warranty. The vehicle is still in use, so mileage may increase slightly. All information provided without guarantee, subject to errors and prior sale. Used vehicle: with warranty, model/year: 2012, 07/2012, TÜV: 10/2026, CaraWorld ID: cw-26578246, Emissions class/standard: Euro 6, base vehicle: Mercedes Actros, transmission: automatic, interior height: 230 cm, unladen weight: 15,000 kg, gross weight: 15,000 kg, payload: 3,000 kg, beds: double bed front, double bed rear, double/French bed, drop-down bed, queen bed, sleeping areas: rear (240x200), drop-down bed (180x200), seats with seatbelts: 4, heating: diesel auxiliary heater, fresh water reserve: 999 l, waste water tank volume: [continued]

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2204, prevoženi kilometri: 699.550 km, moč: 331 kW (450,03 KM), prva registracija: 06/2018, vrsta goriva: dizel, lastna masa: 11.980 kg, skupna masa: 27.000 kg, velikost pnevmatike: 315/70/22.5, stanje pnevmatik: 80 odstotek, konfiguracija osi: 6x2, medosna razdalja: 5.000 mm, naslednji pregled (TÜV): 06/2027, gorivo: dizel, zavore: retarder, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: euro6c, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 9.750 mm, skupna višina: 4.000 mm, dolžina tovornega prostora: 7.350 mm, širina tovornega prostora: 2.490 mm, višina nakladalnega prostora: 2.750 mm, Leto izdelave: 2018, Oprema: ABS, AdBlue, EBS (Elektronski zavorni sistem), Tahograf, USB priključek, airbag, asistent za ohranjanje voznega pasu, centralno zaklepanje, dodatne luči, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, elektronski program stabilnosti (ESP), filter saj, greljenje sedeža, klimatska naprava, meglenke, nadzor oprijema, navigacijski sistem, nizka raven hrupa, parkirna klimatska naprava, parkirni grelec, računalnik na krovu, registracija tovornjaka, registracija vozila, retarder, servovolan, sistem za pomoč pri speljevanju v klanec, spojka prikolice, spojler, tempomat, vozilo za nekadilce, zapora diferenciala, R 450 s Topline kabino, 2 postelji, stacionarna klima, hladilnik, solarni panel, 6x2, zadnja os je vodljiva in dvižna, vlečna kljuka 40 mm, Palfinger 2 t nakladalna ploščad, Edscha ponjava, aluminijaste stranske stene pod ponjavo, 3 vrste žepov za vtične stranice, 2x predal za shranjevanje, 2x gasilni aparat, alu platišča, pnevmatike spredaj 90 %, sredina 60 %, zadaj 90 %, sprednja os listnato vzmetenje, zadnji osi zračno vzmetenje. Itodpfszhulnex Ag Esk Nemško vozilo iz prve roke. Prodaja samo pravnim osebam in brez kakršnega koli jamstva. Dostava na katerokoli nemško pristanišče.

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings Itjdpfstphtmox Ag Eek 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: rabljeno, prva registracija: 10/2006, Leto izdelave: 2006, DINKEL, specializirana prikolica s 5 osemi / širina 5 m in višina 3,5 m pod ponjavo !! za specialne transporte, npr. transporte strojev !! • Prikolica je električno razširljiva do širine 5 metrov • Notranja višina: 3.200 mm (možno 3.500 mm!) • EDSCHA – nadstrešek • električno/hidravlično dvižno streho • eloksiran/pocinkan okvir! • 5 dvojnih SAF osi • električno vodljivo • z zračno vzmetjo • 1. os je dvižna • 4. + 5. os sta vodljivi • Gume: 205/65 R 17.5 • Diskovne zavore • Dovoljena skupna masa: 49.000 kg - TÜV/HU in SP na zahtevo in po dogovoru: novo! - Nemško vozilo! - Prvi lastnik! Itodpfx Ajzmf Udjg Eok Napake in vmesna prodaja pridržani! = Dodatne informacije = Lastna teža: 10.600 kg Cena: Na zahtevo

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area Itjdpfxjtvfkfj Ag Eek - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear Iodszahp Sepfx Ag Ejtk 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: rabljeno, prevoženi kilometri: 189.410 km, moč: 114 kW (155,00 KM), prva registracija: 09/2020, vrsta goriva: dizel, skupna masa: 3.500 kg, barva: črn, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, prostornina tovornega prostora: 11 m³, dolžina tovornega prostora: 3.150 mm, širina tovornega prostora: 1.810 mm, višina nakladalnega prostora: 1.890 mm, Leto izdelave: 2020, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, EXPORT PLATES DONE IN 1 HOUR. NEW SERVICE + INSPECTION DONE IN OUR GARAGE. Sonderausstattung: Ablage im Dachhimmel Fahrerhaus, Ablagefach auf Armaturentafel mit USB-Anschluss, Armaturentafel Komfort, Audiosystem: Digitales Audiosystem (DAB) HI-Connect mit 7" Farbdisplay und Navigation, Fahrassistenz-System: Notbremsassistent AEBS + City Brake, Federung Hinterachse: Parabel (verstärkt, Stufe 2), Feststellbremse elektrisch, Halterung Feuerlöscher, Hecktür (Öffnungswinkel 260 / 270 Grad), Kraftstofftank: 90 Ltr., Lenksäule (Lenkrad) höhen-/längsverstellbar, Reserverad in Fahrbereifung, Reserveradhalter zwischen Bodenlängsträger, Rückfahrkamera, Sitze im Fahrerhaus: Beifahrereinzelsitz, 3-fach verstellbar, Sitze im Fahrerhaus: Fahrersitz Komfort (hydraulisch), Voll-LED-Scheinwerfer Weitere Ausstattung: Anhänger-Stabilisierungs-Programm (TSM), Anhängersteckdose Vorbereitung, Antriebs-Schlupfregelung (ASR), Ausführung: S-Reihe, Auspuffrohr seitlich links, Außenspiegel elektr. verstell- und heizbar, Bremsassistent, Deckenleuchte im Laderaum, Elektr. Bremskraftverteilung, Fahrassistenz-System: Berganfahr-Assistent (AAS), Federung Hinterachse: Parabel, Federung Vorderachse: Querblattfeder, Frontscheibe und Seitenscheiben getönt, Generator 210 A, Geschwindigkeits-Begrenzeranlage 160 km/h, Getriebe Automatik - Hi-Matic (8-Stufen), Harnstofftank (AdBlue): 20 Ltr., Karosserie/Aufbau: Kasten Hochraum Standard, Motor 2,3 Ltr. - 114 kW Diesel, Radstand 3520 mm, Schadstoffarm nach Abgasnorm Euro 6d-TEMP, Schiebetür Lade-/Fahrgastraum rechts, Wartungsanzeige, Zul. Gesamtgewicht 3,50 t Iodpfx Agoy U Iuro Eotk

Stanje: novo, lastna masa: 34.500 kg, največja dovoljena obremenitev: 106.700 kg, skupna masa: 141.200 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.150 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 580 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 34.500 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically lift/lowerable as well as detachable - Length approx. 3,650 mm - Extensive lashing positions - For tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie: - Hook mounts at front and rear - Chassis length x chassis width approx. 3,560 mm x 2,850 mm - Extensive lashing positions Excavator Deck “BB-A”: - Telescopic excavator deck “BB-A” with drive-over deck hooks at the front and bolted lug coupling at the rear - Length x base width approx. 7,150 mm x 2,850 mm - Beam height x beam width approx. 430 mm x 1,350 mm - Loading height 580 mm with 150 mm ground clearance - 5 pairs of hanging lashing rings (LC 10,600 daN) - 4 pairs of threaded blocks M30 on inner beam for mounting screw-on rings Itjdpewhywfsfx Ag Ejk 5-Axle Rear Bogie: - Mechanical bolt-on lug coupling for fitting a lowbed front, rear end traverse - Chassis length x chassis width approx. 6,840 mm x 2,850 mm - Extensive lashing positions Pendulum Axle and Tyres (front and rear bogie): - “PENDEL-AXLE”, all axles hydromechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-plugs for securing in lifted position - Final paint of axles with 2 coats of 2K paint, single-colour in MB 7350 Novagrau - Technical axle load: 14,640 kg (62 km/h) - Hydraulic axle compensation - Axle tools - Tyres 285/70 R19.5 Steering Override: - Remote steering from the front and rear via cable remote control with push buttons, including axle tracking control - Socket for steering control operation on the gooseneck - Cable remote control with push buttons including axle tracking control Included accessories: - Yellow-red air couplings on galvanised front connection rail - Steel headboard approx. 400 mm high - 4 wheel chocks with holders - 2 spare wheels 285/70 R19.5 - 3.5" kingpin - Gantry with winch for spare wheel at the front side of the gooseneck - Truck hydraulic connection with flow control valve (40 l/min), including gantry for suspension of supply lines, tractor unit tank must be at least 80 litres with couplings - White reflective tape according to EU regulations on sides and extension, red at rear - Plug-in ALU side panels and rear wall on gooseneck, approx. 400 mm high, anodised - Operating lever on gooseneck protected by folding cover - Separate air connection with air pistol on gooseneck - Central lubrication system BEKAMAX with standard grease NLGI-2: 1x on the gooseneck, 1x on 3-axle bogie, 1x on 5-axle bogie - Variomax tool kit - Multi-coupling hydraulic connections in the lowbed hook area - Front bogie with separate air connection for air screwdriver - Threaded inserts (ø 40 mm) every approx. 500 mm on outside of upper flange of excavator deck for screw rings - Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm - Steel mats with rubber covering approx. 12 mm thick - Two INOX toolboxes 855 x 340 x 390 mm - Radio remote control for steering override in addition to cable remote - Painted sand layer as anti-slip measure - 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 6.240 kg, skupna masa: 34.000 kg, skupna dolžina: 13.840 mm, skupna širina: 2.550 mm, Leto izdelave: 2017, Dobro stanje, vključno z dodatno opremo: pasovi, zaščitni robovi itd. Oprema: dvižno strešno nadzidavo, zaboj za palete, jeklen zaboj, nameščen pod vozilom, 3 osi, pnevmatike: 385/55 R22,5. Itodpfox I Rftex Ag Eek

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Iedpfx Aouadk Nsg Eetk Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 11.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 r 22,5, barva: sivo-črna, Oprema: ABS, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism A fixed intermediate table, approx. 250 mm wide, is mounted on the central beam 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Openings in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) Axles and tyres: BPW axles and suspension, all axles with hydro-mechanical forced steering Disc brakes, technical axle load: 10,000 kg Air suspension with lift and lower valve Axle tools 6 tyres, size 385/65 R 22.5 Brake system: Brake system according to EU regulations with EBS-E (2S2M) Landing gear: JOST landing legs (mechanically operated) with 2-speed gearbox for 24 t lift load (50 t test load) Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX mounted on the front terminal board with 24N, 24S & 15-pin sockets Connections according to ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: First-class, long-lasting corrosion protection of the standard grit-blasted welded frame, guaranteed by a 2-component (2K) zinc-dust primer High-quality, single-colour 2-component (2K) top coat in Novagrau Rear section metallised and painted in RAL 9010 (pure white) No metallic paint finish possible Included accessories: At the gooseneck and at the rear plate, left and right, each with a bracket for warning signs, including socket Remote steering from the front and rear via cable remote control with push buttons, with single-track control of the axles Electro-hydraulic unit 4 wheel chocks with brackets on the front wall 2" kingpin A galvanised steel front wall approx. 2,200 mm high Yellow-red air couplings on the galvanised front terminal board White reflective tape on the side, at the extension and rear in accordance with EU regulations, red at the rear European reflective plates (red-yellow) on the rear of the trailer One mud flap on the rear of the trailer Manual and documentation Ijdpfx Agshlz Shs Estk Bracket for a revolving warning light at the rear of the trailer Loading platform with approx. 30 mm thick wooden floor set in omega profiles 10 pairs of stake pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right-hand side in the driving direction 6 pairs of WADER container locks in the loading platform, for 1x 20ft container, 2x 20ft containers or 1x 40ft container; in the extension, an additional locking position is provided for a 45ft container 5 pairs of stake pocket strips, mounted transversely in the loading platform, for plug-in stanchions 100 x 50 mm A galvanised bracket mounted transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right in the direction of travel One HDPE toolbox 1,200x500x480 mounted at the front under the loading platform on the left in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and loading status Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection around the pump Red/white reflective tape on the extension of the loading platform On the central beam,

Stanje: rabljeno, prevoženi kilometri: 79.850 km, moč: 96 kW (130,52 KM), število sedežev: 4, vrsta goriva: dizel, vrsta prenosa: mehanski, barva: bela, prva registracija: 03/2016, skupna dolžina: 7.400 mm, skupna širina: 2.300 mm, skupna višina: 2.570 mm, konfiguracija osi: 2 osi, emisijski razred: Euro 5, skupna masa: 3.500 kg, Leto izdelave: 2016, Oprema: vgradna kuhinja, Ponujamo vam dobro ohranjeno vozilo za potovanja, ki je bilo v lasti dveh lastnikov. * 2,3-litrski Fiat Ducato (96 kW / 130 KM) * 16-palčna poletna platišča * Klima na strehi DOMETIC * Sistem zatemnitve kabine * Radio Isdpfx Ajzu T Hkeg Eotk * Kamero za vzvratno vožnjo * Električni stopnični sistem * Nosilec za kolesa * Senčnik . Zdaj imate nekaj informacij o tem modelu. Imate še kakšno vprašanje ali željo glede tega ali katerega drugega modela? Obrnite se na nas. Z veseljem vam bomo svetovali in pomagali. Seveda vas bomo z veseljem sprejeli osebno. Takrat si lahko ogledamo ta model in/ali druge modele. Skupaj bomo našli pravo vozilo za vaše potovanje. Lep pozdrav, vaša ekipa za prodajo, Spürkel. Model/leto proizvodnje: 2016, 03/2016, nov tehnični pregled: da, notranja ID: 90689, razred/standard emisij: Euro 5, osnovno vozilo: FIAT Ducato, menjalnik: ročni menjalnik, postelje: enojna postelja, dvižna postelja, sedeži z varnostnim pasom: 4, največja dovoljena masa prikolice (zavorne): 2000 kg, ogrevanje: Truma Combi 4, prostornina hladilnika: 142 l, oblazinjenje: serijska tkanina, prejšnji lastniki: 2, dodatno: nov tehnični pregled, opravljen pregled, PAKET: Trend ST, dodaten opremljen paket, PODVOZJE: Fiat Ducato MultiJet 130 Light (2,3 l / 130 KM), OKNA, VRATA, VENTILACIJA: klimatska naprava Truma Aventa Comfort, vrata s komarnikom, rolo za zatemnitev kabine (zaščita pred pogledom), PLIN, OGREVANJE, VODA: izoliran rezervoar za odpadno vodo, družinski paket, SENČNIK: senčnik različnih dolžin. Vaš prodajalec vam bo z veseljem svetoval., MULTIMEDIJA: DVD-radio, OGREVANJE/KLIMA: plinski grelec

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Produktpalette, lastna masa: 12.800 kg, največja dovoljena obremenitev: 44.200 kg, skupna masa: 57.000 kg, konfiguracija osi: 3 osi, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5", stanje pnevmatik: 100 odstotek, Rešitev transporta po meri Konfigurirajte svoje vozilo Fliegl v skladu z vašimi zahtevami. Prikazano vozilo je primer. Proizvodnja in oprema sta prilagojeni posameznim željam kupca. Podvozje: polpriklopnik z nizkim ležiščem Jeklena varjena konstrukcija, sedlasta plošča z zamenljivim drugim zatičem kralja in dvema pozicijama za drugi zatič 24 t dvostopenjski podporni vitel, enostransko upravljanje Zložljiva zadnja opora 2 zagozdi za podvozje s pritrdilcem Stranska zaščita proti naletu iz aluminija 1 plastična orodjarna s polico, b =620/h =360/t =440 mm, z možnostjo zaklepanja s ključavnico Razširitve izvlečne do 3.000 mm Predal za lesene deske na labodjem vratu, spredaj prečno Lesene deske 70 mm za razširitev na 3.000 mm Teleskopski sistem Centralni cevni okvir iz natančno zvarjenih, teleskopsko prekrivajočih se delov okvirja izvlečno do maks. 6.000 mm in z možnostjo fiksacije na vsakih 1.000 mm Zavarovanje s pomočjo mehanskega zatičnega sistema s pomično mizo Pritrdilne ušice za nizkopodna vozila 2 para obročastih priveznih ušes, po 5 t, spredaj na labodjem vratu, 11 parov priveznih nastavkov zgoraj in ob strani v zunanjem okviru, vsak po 10 t, 2x na labodjem vratu, 9x na površini nizkega ležišča, prva privezna točka 250 mm od spredaj in zadnja največ 250 mm od zadaj, razdalja med ušesi ne več kot 1.100 mm 8 parov žepov za kolike, vdelanih v zunanji okvir, notranja mera 70 x 40 mm (prilagodljivi za 5 t obročasta ušesa, ni vključeno v dobavo) 3 para zložljivih priveznih ušes, dodatno vgrajenih v območju nizkega ležišča, vsak po 10 t: 1x začetek nizkega ležišča, 1x pred 1. osjo in 1x za 3. osjo Preme in vzmetenje SAF bobnaste zavore Premične/šasija lasersko merjena za zmanjšanje obrabe pnevmatik in porabe goriva Zadnji dve premi vodeni, z avtomatsko blokado vzvratne vožnje prek vzvratnih luči in ročno blokado z gumbom na vozilu Zračno vzmetenje z ventilom za dvig/spust Kolesa in pnevmatike 235/75 R 17,5, znamka Fulda Jeklena platišča v dvojni postavitvi, tovarniško srebrna Zavorni sistem Dvovodni zračni zavorni sistem Vzmetna parkirna zavora Sistem stabilnosti vozila Prikaz nosilnosti osi preko EBS-Canbus signala, za prikaz na zaslonu v kabini tovornjaka, tovornjak mora biti temu prilagojen, brez LKW instalacije (brez overjene tehtnice) 2 proti zamenjavi odporna priključna spoja spredaj, brez povezovalnih cevi EBS, elektronski zavorni sistem z EBS vtičnico spredaj, brez povezovalnega kabla Opozorilo: Priklopno vozilo lahko vlečejo le vlečna vozila, ki zagotavljajo delovanje ABS! Elektrika 24 V, večkomorni žarometi, stransko rumena LED osvetlitev 2 bela pozicijska žarometa spredaj 2 bela/rdeča označevalna žarometa zadaj 1 LED rotacijska luč z nosilcem, upravljana prek pozicijskih luči (luč snemljiva) 2 para opozorilnih plošč, dvojno LED osvetljene in izvlečne do 3.000 mm 2x 7-polni proti zamenjavi odporni vtičnici spredaj, brez povezovalnega kabla Talna obloga Labodji vrat s prevleko iz jekla/protizdrsne pločevine Iodpfxsi Ri Hne Ag Eetk Skladiščni prostor v naklonu labodjega vratu nato z 70 mm mehkim lesenim podom, v območju kolesnih vodil jekleni/protizdrsni sloj Zadnji naklon s 70 mm mehkim lesenim podom Stranske stene 25 mm aluminijasti votli profil, 400 mm visoke, spredaj in ob strani na labodjem vratu, snemljive Nakladalne rampe Jeklene rampe, dolžine 2.800 mm, širine 750 mm, bočno pomične prevlečene z lesom Hidravlično prek priklopa na pomožni pogon vlačilca z dušilnikom Hidravlični priključek s SVK spojko NW 10/3, brez povezovalnih cevi Navodila za upora

Stanje: rabljeno, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2018, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.750 mm, skupna širina: 2.540 mm, Oprema: ABS, Številka vozila: YAFSR3003J0021354 TELESKOPSKA PODALJŠANJE do 8.200 mm NOSILCI ZA KONTEJNERJE WADER za 1 x 20", 2 x 20", 1 x 40", za 45-palčne kontejnerje Ijdpfxszp S Ezs Ag Eotk DE, HU – pregled bo potrebno opraviti SAF osi s bobnastimi zavorami 3 osi, hidravlično-mehansko krmiljene, nameščene na vrtljivi plošči s kabelskim in radijskim daljinskim upravljanjem Samodejno usmerjanje Dimenzije platforme: 13.500 mm – višina nakladalne površine: 1.100 mm Višina sedelne sklopke: 950 – 1.050 mm Polmer obračanja v zadnjo smer: 2.100 mm Reže za nosilce v podu, vključno z nosilci (celovitost ni zagotovljena) NATO vtičnica Elektrohidravlična enota Luči za označevanje širine Orodjarna Centralni sistem za podmazovanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo, VKLJUČNO z rezervnim kolesom Pridržujemo si pravico do sprememb, vmesne prodaje in napak. Opis služi splošni identifikaciji vozila in ne predstavlja garancije v smislu pogodbenega prava. Odločilna je informacija, navedena v pogodbi o prodaji. Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisnih centrov! Vozilo je lahko opremljeno z reklamami in/ali oznakami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max Itsdpfx Asi Ai E Reg Eek - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, lastna masa: 6.575 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 07/2011, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.300 mm, skupna dolžina: 13.650 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22,5, stanje pnevmatik: 30 odstotek, medosna razdalja: 1.360 mm, Leto izdelave: 2011, Oprema: ABS, Rabljen odprt polpriklopnik Jeklena sprednja stena z izbočenjem za dolge jeklene profile Tla okrepljena z jeklenimi profili Stranski žepki za stebričke Itjdoy Ercbjpfx Ag Eek Skladiščna škatla za vstavljive stebričke

Stanje: rabljeno, lastna masa: 10.650 kg, največja dovoljena obremenitev: 40.310 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 760 mm, skupna dolžina: 13.100 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, Za vsak rabljen priklopnik prejmete aktualno in celovito poročilo o pregledu in funkcionalnosti. Gosi vrat: -Gosi vrat s trdo leseno oblogo debeline 30 mm -Gosi vrat zadaj v ravni izvedbi -3 pari pritrdilnih obročev (nosilnost 5.000 daN) Nosilna površina v izvlečni izvedbi: -Nosilna površina v izvlečni izvedbi -5 parov pritrdilnih obročev, ki se zložijo navzven (nosilnost 5.000 daN) -3 pari pritrdilnih obročev, ki se zložijo navzven (nosilnost 10.000 daN) Iodpsxwnfmsfx Ag Estk -1 par pritrdilnih obročev, nameščenih v ležečem položaju na sprednji strani nosilne površine (nosilnost 10.000 daN) -Izrezi na zunanjem okvirju nosilne površine za obešanje zateznih trakov (nosilnost 2.000 daN) -Trda lesena obloga debeline približno 48 mm, nad osmi je obloga iz valjane pločevine Osi in pnevmatike: -Osi BPW, dve osi fiksni, dve osi s krmiljenjem -Zračna vzmetenje, s bobnastimi zavorami, z funkcijo dvigovanja/spuščanja -Krmiljene osi z elektromagnetsko blokado za vzvratno vožnjo, ki se aktivira s prestavo za vzvratno vožnjo ali ročno -Orodje za osi -Pnevmatike 205/65 R17.5 -Sistem za nadzor tlaka v pnevmatikah TPMS, v skladu s standardom ECE R 141 Dodatna oprema vključena: -En rezervni kolesni komplet z nosilcem pred čelno steno -2" kraljevska vlečna glava -Pocinkana jeklena čelna stena, približno 400 mm visoka -Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke -4 kosi zavor, z nosilcem na čelni steni -Pocinkane zložljive opore pod poševnino nosilne površine -Nosilec za rotacijsko luč na zadnji strani priklopnika -Razširitve, pocinkane, izvlečne za približno 230 mm na stran -Bel odsevni trak v skladu z direktivami EU, nameščen na boku, na izvlečnem delu in zadaj rdeče barve -Na gosi vratu in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico -Lovilec umazanije na zadnji strani priklopnika -Evropske odsevne table (rdeče-rumene) na zadnji strani priklopnika -Na gosi vratu in na zadnji steni, ALU stranske plošče in zadnja plošča, ki se vstavi, približno 2.440 x 400 mm -Zadnji, pocinkani stranski nosilci so snemljivi. Dolžina nadgradnje približno 2.560 mm -7 parov WADER posod za zabojnike: -1 x 20-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik na nosilni površini -1 x 40-stopični zabojnik nad gosi vratom -2 x 20-stopični zabojniki -Podporni blok z 1 parom WADER posod za zabojnike (največja nosilnost približno 20.000 kg) -7 parov posod za stranske nosilce za vstavne nosilce 100 x 50 mm v zunanjem okvirju nosilne površine -Dvignjena os na sprednji osi, upravljanje preko TEBS E, odvisno od trenutne obremenitve osi in trenutnega stanja obremenitve -Pomikalna vstavna letev za ALU rampe na zadnji strani vozila -Na valjani pločevini na gosi vratu in na nosilni površini, nanos plasti peska za preprečevanje zdrsavanja -Štiri izvlečne opozorilne table, približno 400 mm, približno 423 x 423 mm, z pozicijsko lučjo -Na opozorilnih tablah nosilec za rotacijsko luč -Nalepka za omejitev hitrosti 80 km/h zadaj in na obeh straneh -Merilnik obremenitve za ugotavljanje obremenitve osi, vključno s tabelo obremenitve