Faymonville 5-Achs-Doppel-Tele-Semi-Sattelauflieger nakup rabljenega (43.184)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Pokliči
Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website.
Excerpt from the equipment. Full equipment list available on request.
Gooseneck:
- Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Approx. 30 mm thick hardwood flooring
Loading platform:
- Telescopic loading platform with rear slope approx. 1,000 mm x 8°
- Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D)
- Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each)
- 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
- 4 pairs of folding external lashing rings (LC 5,000 daN)
- 3 pairs of folding external lashing rings (LC 10,000 daN)
- Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN)
Landing legs:
- JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load)
Tyres:
- 235/75 R17.5 3PMSF tyres, manufacturer of our choice
- TPMS – Tire Pressure Monitoring System according to ECE R 141
- Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992
- The tractor unit must be capable of transmitting and displaying these data for correct indication.
Axles:
- BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer
- Technical axle load: 12,000 kg
- Electromagnetic reverse lock, activated via reverse gear and manually
- Air suspension with lift and lower valve. Axle tools
Braking system:
- WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor
Electrical system:
- Electrical system in accordance with EU regulations
- LED lighting 24 volts ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicators
- ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098
Steel construction:
- Steel construction made from high-strength fine-grained steel
- Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa)
Painting:
- Entire steel structure automatically shot-blasted with shot-blast machine after welding
- Second blasting with corundum for optimal coating adhesion
- HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection
- Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White)
- Metallic paint not possible
- Paint system tested in salt spray test according to ISO 9227-NSS
- Cavities sealed with special wax
Including the following accessories:
- On both the gooseneck and at the rear left and right, one holder for warning boards, including socket
- Spare wheel holder in front of the bulkhead (without spare wheel)
- 2" king pin
- One galvanized steel front wall, approx. 400 mm high
- Yellow-red air couplings at the galvanized connection panel at the front
Hfodpfow Tpq Dex Ag Isg
- Galvanized folding supports under the rear slope of the loading platform
- Hardwood rear impact protection from gooseneck rear wall to loading platform
- 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN)
- On the gooseneck, aluminum side and rear walls
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Pokliči
Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Our complete vehicle inventory with immediately and soon available vehicles can be found on our website.
Excerpt from the equipment. Full specification available upon request.
Gooseneck
* Gooseneck with chamfered front corners approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood floor approx. 30 mm thick
Loading Area
* Double extendable design with rear bevel approx. 500 mm x 8°
* 6 pairs of folding external lashing rings (LC 5,000 daN)
* 4 pairs of folding external lashing rings (LC 10,000 daN)
* 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN)
* 1 intermediate table approx. 250 mm
* Hardwood floor approx. 48 mm thick, chequered plate overlay above axles
* Cut-outs in the loading area outer frame for attaching tension belts (LC 2,000 daN)
Axles
Hodpow Tprzofx Ag Isfg
* BPW axles and suspension, all axles hydro-mechanically steered
* Technical axle load: 12,000 kg each
* Air suspension with lifting and lowering valve
* Axle tools
Tyres:
* 245/70 R 17.5, load index (146/146 F)
* Make of our choice
Landing legs:
* JOST mechanical landing legs with 2-speed gearbox, lifting capacity approx. 24 t (approx. 50 t tested capacity)
Brake system:
* Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit
Paint finish:
First class and durable corrosion protection
* High-quality two-component (2K) single-colour top coat in RAL 3002 carmine red.
* Rear section metallised and painted in RAL 9010 (pure white)
Steel construction:
Steel structure made of high-strength fine-grained steels.
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)
Electrical system:
* Electrical system according to EU regulations
* Lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Including the following additional equipment:
* 2-inch kingpin
* Hot-dip galvanised steel bulkhead, approx. 400 mm high
* Yellow-red air couplings on the galvanised front terminal strip
* Spare wheel carrier in front of the bulkhead
* Electro-hydraulic power unit
* Remote steering front and rear via cable remote control with push buttons, includes axle tracking control (without installation in tractor unit)
* Recess at the rear of the gooseneck for aluminium approach ramps
* Anchor rail for aluminium approach ramps at the rear of the vehicle
* Galvanised folding supports under the loading area rear chamfer
* Aluminium drop sides and rear board on the gooseneck, plug-in, approx. 2,440 x 400 mm (L x H)
* Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm)
* One galvanised toolbox integrated in the chamfered gooseneck
* 4 pairs of WADER container locks in the loading area for a 20', 2x 20', 40' or 45' container
* 8 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the loading area outer frame
* Galvanised extensions, extendable by approx. 230 mm per side
* Sliding anchor rails for aluminium approach ramps at the rear of the vehicle
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard NLGI-2 grease and removable pump protection
* 2 LED reversing lights mounted on the rear panel
* HRM metallisation (High Resistance Metallisation), complete steel structure shot-peened to SA2.5–SA3, then wit
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX110 Semi-Tieflader
Pokliči
Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the specification. Full specification available on request.
Gooseneck
* With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear
* 3 pairs of lashing rings (LC 5,000 daN)
Loading Platform
* Extendable version
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN)
* Approx. 48 mm thick hardwood flooring, checker plate covering above the axles
Landing Legs
* JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t)
Tyres
* 205/65 R 17.5
Axles
* BPW axles and suspension
* 1st axle rigid, remaining axles hydro-mechanically forced-steered
* Air suspension with lift and lower valve
Brake System
* In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit
Steel Construction
* Made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Paintwork
Hedpfjv Etx Eox Ag Ijfg
* Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer
* High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red
* Wheels painted silver
Included Accessories
* 2-inch king pin
* Galvanized steel front wall, approx. 400 mm high
* Yellow-red air couplings on the galvanised front connection strip
* 4 chocks with holders mounted on the front wall
* Spare wheel holder in front of front wall
* Electro-hydraulic unit
* Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required)
* European reflector boards (red-yellow) at rear of trailer
* Yellow reflective tape complying with EU regulations on the sides, extension and rear
* On gooseneck and rear plate—left and right—each with holder for warning boards including connector
* Mount for rotating beacon at the rear of the trailer
* Galvanized folding supports below the bevel of the loading platform
* Axle load pressure gauge including axle-load diagram
* 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers
* Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg
* 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform
* Galvanized extensions, extendable by approx. 230 mm per side
* Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle
* 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN)
* 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear
* BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump
* 2 LED reversing lights mounted at the rear
* Acoustic reverse warning signal
* HRM metallisation (High Resistance Metallisation)

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Essen
835 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Radmulden
Pokliči
Stanje: novo, največja dovoljena obremenitev: 37.820 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website.
Excerpt from the equipment. Complete specification available on request.
Gooseneck:
- Gooseneck with front corners beveled approx. 45° and rear bevel approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring approx. 30 mm thick
Loading Platform:
- 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D)
- Wheel recesses with square climbing stripes approx. 15 x 15 mm, including widenings at the bottom
- Between the 1st and 2nd axles, one fixed pair of wheel recesses approx. 1,610 x 700 x 400 mm (L x W x D)
- Incl. 3-part removable galvanized covers over the wheel recesses (W approx. 670 mm), max. point load approx. 5 t/piece
- Recess in the bevel and extending into the loading platform for accommodating excavator stick (approx. 2,900 x 750 x 210/290 mm (L x W x H))
- 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN)
- 5 pairs of folding-out lashing rings (LC 5,000 daN)
- 3 pairs of folding-out lashing rings (LC 10,000 daN)
- 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN)
- Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN)
One-Piece Steel Ramps:
- 1 pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering
- Ramp with hydraulic lifting system, hydraulically adjustable
- Maximum load per pair: 40,000 kg
- In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not need to be considered in the vehicle length in transport position
Landing Gear:
- JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t test load)
Axles:
- BPW axles and suspension, 2 rigid axles, 1 self-steering axle
- Technical axle load per axle: 12,000 kg
- Electro-magnetic reverse lockout, activated via reverse gear and manually
- Air suspension with raise/lower valve
- Axle tool
Tyres:
- Tyres 235/75 R 17.5 3PMSF, brand of our choice
- TPMS tyre monitoring system as per ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. To display correctly, the tractor unit must be able to receive and show this data.
Brake System:
- WABCO brake system in compliance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit
Steel Construction:
- Steel structure made from high-tensile fine-grained steels
- Steel grades: S355J2+N/S355MC (yield strength 355MPa); S690QL/S700MC (yield strength 690MPa)
Electrical System:
- Electrical system in accordance with EU regulations
- 24 Volt lighting ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front terminal bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Paintwork:
- Complete steel structure automatically shot blasted with a turbine blasting system after welding
- Second blasting process with corundum for optimum coating adhesion
- HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection
Hfedpfx Agsw Tpqwj Iog
- Final paint with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system
- Rims in silver
- Rear section metallized and in RAL 9010 (con...
Mali oglas
Legden
847 km
Polpriklopnik z nizko nakladalno ploščadjo
FAYMONVILLESTN-4AUM 4.Achs Tieflader, Ausziehbar,Lenkachse
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno
* Sledilna krmiljena os
* Hidravlične nakladalne rampe
* Zračno vzmetenje
-----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje
WhatsApp podpora na voljo!
Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa
WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko
Hfodpfox I Uyhex Ag Iog
Mali oglas
Andelst
932 km
Polovični polnilnik z nizkim nakladanjem
FaymonvilleF-S42-111A SEMI DIEPLADER/TIEFLADER/LOWLOADER
Pokliči
Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires
Rear axle 2: Dual tires; Steering axle
Unladen weight: 8,060 kg
Loading platform height: 86 cm
Extendable body: Yes
Technical condition: Very good
Visual condition: Very good
Price: On request
FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER
2x SAF axles
1x steering axle (trailing)
Tire size
Extendable loading platform
Length 680 cm + 420 cm extendable, total platform length 1,100 cm
Platform width 254 cm
Platform height approx. 86 cm
Gooseneck length 330 cm
Lashing eyes, stake pockets, twistlocks
Follow us on Instagram: GEURTSTRUCKS
Lowbed trailer built in 2016, but sold as new in 2020
We speak German
Hfedpfx Agex Upxxo Ijg
Hablamos Español
We speak English
Mali oglas
Neuenstein
529 km
Keson prikolica
OBERMAIER5 to 1-Achs Anhänger Möbelkoffer Portaltüren
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 1.920 kg, skupna masa: 4.500 kg, konfiguracija osi: 1 os, prva registracija: 09/2011, dolžina tovornega prostora: 7.230 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 2.650 mm, prostornina tovornega prostora: 47 m³, Oprema: ABS, * 8926 – Vehicle ID for telephone inquiries
* Type: OS1-L50ZL
* Features: ABS, EBS, BPW axles, drum brakes, air suspension with raise/lower function, landing gear at the front, rear support legs, height-adjustable drawbar, swing doors, lashing rails integrated into the walls, box body lined with felt, spare wheel
* Tyres: 215/75R17.5 (tread depth: 6 / 6 / 6 / 7 mm)
* Trailer weight limited to 4,500 kg (technically permitted GVW: 5,000 kg)
----Our email address:
Our services for you:
- Procurement of short-term or export license plates
- Transportation / delivery EU-wide
- Customs clearance for vehicles exported to non-EU countries
Hjdpfx Agsw D Ntns Iofg
If you have questions in Russian, you can call the following number *
WhatsApp for Russian speakers only: *
WhatsApp for English, German and other languages:
Mali oglas
Hoogerheide
979 km
Nizki nakladalnik
Kassbohrer5-axle semi-lowbed trailer ext 74 t + ramps
Pokliči
Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 01/2021, skupna dolžina: 13.900 mm, skupna širina: 2.750 mm, skupna višina: 3.200 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2021, Oprema: ABS, = Additional Options and Equipment =
- Lift axle
- Steering axle
- Drum brakes
= Notes =
Chassis
Kingpin diameter / fifth wheel coupling: 2 inch
Height of kingpin / drawbar: 120 cm
Drum brakes: ✓
Special transport
2-piece road plates: ✓
Hydraulic ramps: ✓
Loading platform length: 910 cm
Gooseneck length: 390 cm
Maximum width: 3 cm ( 275
Maximum length: 1380 cm (460 cm extension)
Extendable: ✓
Telescopic: ✓
= Further Information =
Axle configuration
Tyre size: 245/70 R17.5
Axle manufacturer: BPW Eco Plus
Brakes: Drum brakes
Suspension: Air suspension
Front axle: Twin tyres; Left inner tyre tread: 50%; Right inner tyre tread: 40%
Centre axle 1: Twin tyres; Left inner tyre tread: %; Right inner tyre tread: 50%
Centre axle 2: Twin tyres; Left inner tyre tread: 20%; Right inner tyre tread: 40%
Centre axle 3: Twin tyres; Steering; Left inner tyre tread: 55%; Right inner tyre tread: %
Rear axle: Twin tyres; Steering; Left inner tyre tread: %; Right inner tyre tread: 35%
Weights
Unladen weight: 12,480 kg
Payload: 61,520 kg
Gross vehicle weight (GVW): 74,000 kg
Identification
Registration number: K3361028
Hedpfxjx Thz Nj Ag Iofg
= Company Information =
For more information on this unit please call: or e-mail: .
A full stock overview can be found at: .
Please do not forget to subscribe to our newsletter for weekly updates on our stock.
Mali oglas
Dortmund
815 km
Odprta polprikolica s ponjavo
MAX Trailer3-Achs-Jumbo-Semi-Rampen-Planenaufbau
Pokliči
Stanje: rabljeno, lastna masa: 11.950 kg, največja dovoljena obremenitev: 37.550 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Gooseneck:
- Gooseneck with rear chamfer of approx. 750 mm x 10°
- 3 pairs of lashing rings
- 30 mm thick hardwood flooring
Two-piece steel ramps:
- One pair of galvanized two-piece steel ramps, approx. 3,185 x 1,420 x 1,250 mm, with grating surface
- Ramps with hydraulically foldable ramp sections and hydraulic lifting system
- Maximum load per pair: 30,000 kg
Loading platform:
- Loading area with rear chamfer of approx. 1,000 mm x 8°
- 5 pairs of externally foldable lashing rings
- 3 pairs of externally foldable lashing rings
- 1 pair of flat lashing rings at the front of the loading area
Hedjy Drdcjpfx Ag Isfg
- Approx. 48 mm thick hardwood flooring; tread plate surface above the axles
Axles and wheels:
- BPW axles and suspension; two axles fixed, one self-steering axle
- Air suspension with raise/lower valve
- Self-steering axles with electro-magnetic reverse lock, activated via reverse gear or manually
- Tyres: 235/75 R17.5 3PMSF
Accessories included:
- 1 spare wheel with holder
- TPMS tyre pressure monitoring system in accordance with ECE R 141
- 2" kingpin
- One galvanized steel bulkhead
- Yellow-red air couplings at the galvanized front connector rail
- 4 wheel chocks with holders
- Recess at the rear of the gooseneck for ALU access ramps
- 3 heights of aluminum planks
- Galvanized folding supports under the chamfer of the loading platform
- A holder for a revolving beacon at the rear of the trailer
- Height-adjustable tarpaulin structure (3,960 mm)
- Galvanized front wall with a tensioning mechanism for the sliding curtain
- Height adjustment possible by approx. 400 mm
- "EDSCHA" branded roof, forward-slidable on aluminum roof beam profiles, bolted to front and rear walls
- 3 pairs of sliding stanchions on the loading area
- Structure hydraulically extendable at the rear by approx. 750 mm to the left and right
- Sliding roof with pivotable portal beam
- Sliding curtain with 700 mm length reserve, tension belts spaced approx. 600 mm apart
- Height to top edge of structure approx. 3,960 mm
- Driving with an open sliding roof is not permitted and will lead to damage of the tarpaulin
- Cover plates to bridge the gap between ramps and loading platform
- Electro-hydraulic unit at the rear, under the loading platform
- At the gooseneck and ramps, left and right respectively, one holder for warning signs including socket
- European reflective signs (red-yellow) at the rear of the trailer
- 6 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm on the outer frame of the loading area
- Lifting axle at the front axle with control via TEBS E depending on current axle load and loading condition
- Grating surface in the chamfer of the loading platform C40/4 (point load 3.4 t on an area of 20 x 20 cm)
- One INOX toolbox 565 x 290 x 810 mm on the right in the direction of travel, between the axles
- Painted sand layer on tread plates on the gooseneck and loading platform as anti-slip protection
- BEKAMAX (Pico) central lubrication system with standard grease NLGI-2
- Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm
- Axle load gauge including load diagram
- HRM (High Resistance Metallisation) metallization of the outer frame
- Entire steel structure shot-blasted, then all defined visible surfaces hot-finished in metallisation with ZINACOR 850 (zinc 85% - aluminum 15%)
Mali oglas
Sindelfingen
535 km
Tele nizkoploščadna polprikolica z rampami
NOOTEBOOMMCO-73-04V Tele-Tieflader Rampen 4-Achs
Pokliči
Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 15.900 kg, največja dovoljena obremenitev: 42.100 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 11/2001, dolžina tovornega prostora: 8.960 mm, širina tovornega prostora: 2.520 mm, skupna dolžina: 12.950 mm, skupna širina: 2.520 mm, skupna višina: 3.800 mm, vzmetenje: hidravlika, velikost pnevmatike: 245/70R17,5, medosna razdalja: 1.360 mm, največja hitrost: 90 km/h, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2001, Oprema: ABS, Nooteboom MCO-73-04V
Top trailer from first owner, first registration 21.11.2001,
Fully overhauled in 2014,
Brakes renewed in 12.2025!
66,000kg total combination weight with 3-axle tractor unit,
Gross weight 58,000kg,
Fifth wheel load 18,000kg, 1-4 axles: 10,000 / 10,000 / 10,000 / 10,000kg,
Unladen weight 15,900kg,
Please refer to the technical data sheet for exact dimensions,
Lowbed: 8.96m + 5.50m telescopic extension,
Hydraulic supports front and rear allow the trailer including up to 30t of payload to be lifted completely—ideal for unloading laterally at a ramp,
Hydraulic suspension (enables leveling even with uneven load distribution),
First axle liftable,
All four axles are steerable, either automatically or via remote control (also in opposite direction),
Hydraulic ramps and hydraulically extendable up to 3,000mm,
Load platform extendable to 3,000mm,
Tyres 245/70R17.5 – 1st axle: 6/6/6/6mm, 2nd: 11/11/8/8mm, 3rd: 9/9/7/7mm, 4th: 11/11/7/5mm, Spare: 6mm,
More details upon request. Sale only to business customers or for export.
Leasing/financing available upon request – immediate processing possible, also without down payment! Further details and requirements on request.
Vehicle description is for general identification purposes. All information, images and descriptions are non-binding. Equipment must be verified separately if necessary. The seller accepts no liability for typing or data transmission errors. Errors and prior sale reserved.
Thank you very much for your interest! We look forward to your visit.
Hfjdpfjyqm I Uex Ag Ieg
Our SERVICE
We are happy to take your used vehicle in part-exchange,
30-day export license plate incl. insurance,
EUR-1 and all customs documents for export,
TÜV / SP / UVV / tachograph inspection / OBU installation,
Professional transportation to your location,
Transfer from Stuttgart Airport / Sindelfingen station to us by arrangement,
Retrofitting with additional components and other individual customer requests possible upon request.
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Pokliči
Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0:
----Braking System:
* Wabco EBS (electronic braking system)
* Emergency release mechanism for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (when lifted, ride height +30 mm)
* Last axle is self-steering (lockable from the cab for maneuvering purposes without any installation on the truck side, and additionally via a switch on the trailer). The lock must be disengaged before driving on public roads.
* Forced lifting and lowering of the lift axle for maneuvering (truck-side installation required), with speed-dependent control via the EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
----Drawbar:
Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as an info tool with pressure sensors for axle load indication per axle group
* Tire pressure monitoring with display in the truck via EBS signal (without truck-side installation)
* LED lighting system 12/24 V
* LED rotating beacon (removable), rear
----General Fittings:
* Mechanical warning sign set for 3 m total width
* Toolbox made of galvanized steel plate approx. 650 x 300 x 600 mm, mounted left side
* Plastic fenders front axle and galvanized steel mudguards rear axle
----Low Loader Platform:
* Front section of turntable platform with 45° corners and 3 stowage compartments with lockable folding lids (folding towards the rear)
* Shortening of the low-bed platform by 500 mm to 6,280 mm including extended recess by 500 mm at the front
* Rubber covering on the folding frame, approach ramp, and running surface of the low-loader platform
* Bamboo wood between the longitudinal beams, in front of the excavator stick rest area
Hjdpfx Ajxptn Dog Iefg
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing eyes in the front corners
* 2 x 13.4 t UVV lashing points on each side in the front and rear corners
* 5 x 10 t UVV lashing rings on each side (swivelable and lowerable, loadable in all directions)
* 4 stake pockets per side with simultaneous 2 t lashing option
* 1 x 16 t UVV lashing ring on the rear crossmember
----Width Extension:
* Extendable and foldable width supports for 3 m total width (plank holder under the chassis, right side)
----Excavator Stick Rest:
* Continuous excavator stick rest with reinforcement profile from last axle to end beam approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of the excavator stick rest
----Ramps:
* Hydraulic folding ramp with dual-circuit hydraulics and folding tip approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (for hydraulic pump outputs on the truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm adjustable via air suspension
----Loading Area Dimensions:
* Platform above turntable: 2,600 + 390 x 2,520 mm
* Low-bed loading platform: 6,280 + 500 x 2,520 mm, incl. 860 mm approach ramp
----Paintwork:
* Chassis, turntable, drawbar, width extension consoles, ramps hot-dip galvanized
* Drawbar yoke, axles, hydraulic axle supports and air tanks painted in black
----Information:
* New vehicle with manufacturer warranty
* Subject to prior sale and errors
----Delivery Time:
Available immediately*
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL5 achs Tieflader, Nachlauflenkachse, MA liftbar
Pokliči
Stanje: novo, največja dovoljena obremenitev: 38.620 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, T5 Profile 50.0:
----Brakes:
* Wabco EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 5 x 11 t Gigant axles
* 3rd axle liftable (ride height +30 mm when axle is lifted)
* Last axle self-steering (lockable from the driver's cab for maneuvering purposes without the need for truck-side installation; additionally lockable via switch on trailer). Deactivate the lock before driving on public roads.
* Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required), with speed-dependent control via EBS electronics
----Suspension:
* Air suspension, lifting and lowering system with RtR valve
Hjdpjl Tihusfx Ag Iefg
----Drawbar:
* Drawbar, 1,500 mm long with 50 mm towing eye and manual height adjustment
----Electrics / Lighting:
* Smartboard as infotool with pressure sensors for total axle load display per axle group
* Tire pressure monitoring with indication in the truck via EBS signal (no truck-side installation necessary)
* LED lighting system 12/24 V
* Removable rear LED beacon
----General Accessories:
* Mechanical warning plate kit for 3 m total width
* Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted side left
* Front axle with plastic mudguards, rear with galvanized steel mudguard skirts
----Low Loader Platform:
* Front section of turntable platform with 45° angles and 3 storage compartments with lockable, rear-hinged covers
* Shortening of the lowbed platform by 500 mm to 6,280 mm including extended step by 500 mm to the front
* Rubber covering on folding frame, drive-on ramp and running surface of the low-loader platform
* Bamboo wood between the longitudinal beams in front of the excavator arm rest
----Load Securing (LaSi Package):
* 2 x 6.4 t lashing rings at front corners
* 2 x 13.4 t UVV lashing points each at side front and rear corners
* 5 x 10 t UVV lashing rings per side (pivoting and lowerable, loadable in all directions)
* 4 stake pockets per side with additional 2 t lashing capability each
* 1 x 16 t UVV lashing ring on the rear cross member
----Widening:
* Extendable and foldable widening outriggers for 3 m total width (beam holders under chassis, right side)
----Excavator Arm Rest:
* Continuous excavator arm rest with reinforcement profile from last axle to tow bar approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of arm rest
----Ramps:
* Hydraulic folding ramp with dual-line hydraulics and extendable tip piece approx. 4,650 x 720 mm including load-holding valves and hydraulic side shift
----Rear Support:
* Hydraulic rear support
----Hydraulics:
* Hydraulic flow divider (required in case of hydraulic pump output on truck over 40 l/min up to max. 140 l/min)
----Loading Height:
* Loaded: 890 mm +/- 20 mm via air suspension
----Platform Dimensions:
* Platform over turntable: 2,600 + 390 x 2,520 mm
* Lowbed platform: 6,280 + 500 x 2,520 mm incl. 860 mm inclines
----Paintwork:
* Chassis, turntable, drawbar, widening consoles, and ramps hot-dip galvanized
* Tow bar, axles, hydraulic axle supports, and air tanks painted in black
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery Time:
* Available immediately*
Mali oglas
Kirchberg
504 km
Polpriklopnik z nizko nakladalno ploščadjo
Semi Trailer 26 FGM 2-Achs Tieflader
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700,
Hodpfxjykgkcj Ag Ijfg
Mali oglas
Oppenau
577 km
Polpriklopnik za hlodovino
DOLL3-Achs-Sattelauflieger LOGO 10
Pokliči
Stanje: novo, največja dovoljena obremenitev: 34.720 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.195 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, 3-Achs Sattelauflieger LOGO 10X
Hodporymwzsfx Ag Ijfg
* Stahl-Glattblech-Abdeckung über Königszapfen geschweißt
* Stahl-Tränenblech-Abdeckung hinten verschweißt
* Elektronische Luftfederung
* 3 Einzelachsen, Fabrikat SAF, 9 t mit Scheibenbremsen
* 1. Achse liftbar
* Handmechanische Abstützung
* Schemel: 6x ExTe D10 (Pos. 4 mit Doppeltaschen, Pos. 5 mit flachen Rungentaschen sowie mit Schnellverschluss-Keilsystem)
* Rungen: 8x ExTe D7 teleskopierbar + 4x ExTe D10 teleskopierbar
* Bereifung: 385/55 R 22,5 auf Stahlfelgen
* EBS Bremsanlage
* LED Schlußleuchten mit integriertem Dreieckrückstrahler
* 4x LED Arbeitsscheinwerfer (1.800 Lumen)
* Luftkessel aus Aluminium
* 3x Greiferabweiser zwischen den Schemeln
* Rahmen + Schemel in RAL 9011 Graphitschwarz
* Alle anbauteile nach EG-Vorschrift
Abbildungen können vom Original abweichen. Angaben ohne Gewähr.
Kontakt:
Niclas Lott
Tel.:
Mali oglas
Nürnberg
462 km
Gradbeni stroji z nizkim nakladalnikom
Humbaur5-ACHS-TIEFLADER HTD 50 V49 Basic Plus
Pokliči
Stanje: novo, lastna masa: 10.650 kg, največja dovoljena obremenitev: 39.350 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.830 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17,5 zoll, Leto izdelave: 2026, Oprema: ABS, osrednja vrtljiva plošča, 5-AXLE SWIVEL-DOLLY LOWBED TRAILER, HOT-DIP GALVANIZED
Hsdpfxohmm Rco Ag Isfg
=> FULL AIR SUSPENSION
=> HOT-DIP GALVANIZED
IN TOP CONFIGURATION!!
* LIFT AXLE
* SELF-STEERING AXLE
• SAF – LOWBED AXLES
• AIR SUSPENSION
• ONE-PIECE LONG ACCESS RAMPS
• HYDRAULIC RAMP LIFTER
• HYDRAULIC REAR SUPPORTS
• HYDRAULIC SIDE SHIFT
• HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE
• EXCAVATOR ARM TROUGH
• CHASSIS AND TURNABLE FRAME HOT-DIP GALVANIZED
• OUTER FRAME ADDITIONALLY PAINTED IN RED
• RAMPS HOT-DIP GALVANIZED
• 10 t LASHING POINTS RECESSED IN DECK
• 3 t LASHING POINTS IN OUTER FRAME (HIGH DECK)
• 6 t LASHING POINTS IN OUTER FRAME (LOWBED)
• 4 PAIRS OF 3 t LASHING POINTS IN OUTER FRAME (LOWBED)
• LASHING POINTS IN EXCAVATOR ARM TROUGH
• 3 METER WIDENING PACKAGE
• FOLDING SUPPORT ARMS
• WOODEN BOARDS IN STEEL BOX UNDER THE DECK
• SECOND STEEL TOOLBOX UNDER THE DECK
• WARNING SIGNS
• REVOLVING BEACON AT REAR
• ANTI-SLIP STRIPS AT REAR
• 2 TOOLBOXES IN HIGH DECK
• DIGITAL AXLE LOAD DISPLAY
• WABCO SMARTBOARD
• AIR SUSPENSION
• LIFT-LOWER VALVE AT REAR (REAR LOWERING FOR LOADING/UNLOADING)
• STAKE POCKETS IN OUTER FRAME
• TWO STAKE POCKETS INCLUDING INSERTABLE STAKES AT FRONT WALL
• EBS – ELECTRONIC BRAKING SYSTEM
B-DIMENSION = approx. 11,790 MM
=> Freight charges for delivery: €2.90 plus VAT per km
=> Prices valid ex D-86368 - Gersthofen
Your direct contact:
Mr. Hirn Tel.
DOLL VEHICLE MANUFACTURING
*Intermediate sale and changes reserved!*
*Price valid ex D-86368 - Gersthofen*
*Sales to business customers only!*
*Images may differ and serve only for general orientation => may include/show accessories for an additional charge*
Mali oglas
Petershagen
821 km
Furgonska polprikolica
KRONE2-Achs Koffer-Sattelauflieger mit Iso Dach
Pokliči
Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Krone SZK 18 eLB41-LI | Dry Liner Box Trailer
Basic Data
• Vehicle type: SZK 18 eLB41-LI
• Fifth wheel height unladen: 1,150 mm
Weights (Approval / Technical)
• Fifth wheel load: 12,000 kg / 12,000 kg
• Axle load: 18,000 kg / 18,000 kg
• Gross vehicle weight: 30,000 kg / 30,000 kg
Dimensions
• Body dimensions: 13,620 x 2,480 mm internal length
• Internal height: 2,715 mm
• Rear portal loading height: 2,650 mm
• Unladen vehicle height: approx. 4,000 mm
• Front construction height: 100 mm (incl. floor)
Axles
• 2 axles, each with 9,000 kg load capacity
• KRONE axles with air suspension and disc brakes
• Brake disc: 430 mm
• Axle spacing: 8,135 mm
• Wheelbase: 1,310 mm
• Warranty: 6 years with unlimited mileage
Tyres & Rims
• 4x 385/65 R 22.5 M+S
• KRONE Smart Tyre Monitoring
• No spare wheel
Braking System
• EBS 2S/2M with ABS
• Spring-loaded parking brake
• Brake system: WABCO
Box Body
• Closed construction
• Side walls: 28 mm sandwich, steel outer layer, insulated
• Roof: 30 mm sandwich, PU core, insulated
• Internal forklift protection on both sides: 320 mm high
• Front wall: steel sheet, interior 9 mm phenolic plywood
• Rear wall: steel container door with seal
• LED light strip on left side of cargo area
• 2 ventilation grilles per side
• 2 rows of lashing rails (800 mm / 1,600 mm above floor)
Hodpfx Ageym Ha Ae Iofg
Floor
• 30 mm waterproof glued board floor
• Strength according to EN 283 up to 7,000 kg forklift axle load
Lighting
• Full LED
• Multi-function rear lights full LED (Hella Gen.2)
• LED side marker lights with indicator function
• Outline brake lights at upper rear
Certificates
• EN 12642 Code XL
• VDI 2700 Beverage Transport
• Daimler Guideline 9.5
• CEMT/CM certificate
Paintwork
• Chassis: RAL 9005 Deep Black
• Box body: KRONE White
• Roof: RAL 9010 Pure White
Mali oglas
Petershagen
821 km
Furgonska polprikolica
KRONE2-Achs Koffer-Sattelauflieger
Pokliči
Stanje: novo, skupna masa: 30.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.650 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, Krone SZK 18 eLB41-LI | Dry Liner Box Trailer
Basic Data
• Vehicle type: SZK 18 eLB41-LI
• Fifth wheel height (unladen): 1,150 mm
Weights (Approved / Technical)
• Fifth wheel load: 12,000 kg / 12,000 kg
• Axle load: 18,000 kg / 18,000 kg
• Gross vehicle weight: 30,000 kg / 30,000 kg
Dimensions
• Body dimensions: 13,620 x 2,480 mm (internal length)
• Internal height: 2,715 mm
• Rear portal through-loading height: 2,650 mm
• Unladen vehicle height: approx. 4,000 mm
• Front structure height: 100 mm (incl. floor)
Axles
• 2 axles, each with 9,000 kg load capacity
• KRONE axles with air suspension and disc brakes
• Brake disc: 430 mm
• Axle group spacing: 8,135 mm
• Wheelbase: 1,310 mm
• Warranty: 6 years with unlimited mileage
Tyres & Rims
• 4x 385/65 R 22.5 M+S
• KRONE Smart Tyre Monitoring
• Without spare wheel
Brake System
• EBS 2S/2M with ABS
• Spring-loaded parking brake
• Brake system: WABCO
Box Body
• Closed body
• Internal side forklift protection: 320 mm high
• Front wall: steel sheet, interior 9 mm phenolic-coated plywood
• Rear wall: steel container door with seal
• LED light strip in the cargo area on the left
• 2 ventilation louvres per side
• 2 rows of lashing rails (800 mm / 1,600 mm above floor)
Floor
• 30 mm waterproof bonded plywood floor
• EN 283 rated for forklift axle loads up to 7,000 kg
Lighting
• Full LED
• Full-LED multifunction rear lights (Hella Gen.2)
• LED side marker lamps with indicator function
• Outline/brake lights at upper rear
Certificates
• EN 12642 Code XL
• VDI 2700 Beverage Transport
• Daimler Guideline 9.5
• CEMT/CM certificate
Hfjdpfx Aevw Hnqog Ieg
Painting
• Chassis: RAL 9005 Jet Black
• Box body: KRONE White
• Roof: RAL 9010 Pure White
Mali oglas
Kirchberg
504 km
Polpriklopnik z nizko nakladalno ploščadjo
Semi Trailer 19 AF 1-Achs Tieflader Plane
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 16.300 kg, skupna masa: 22.000 kg, konfiguracija osi: 1 os, prva registracija: 08/2022, naslednji pregled (TÜV): 09/2026, BPW 10t axles, frame construction made of high-strength Domex 700, total loading area 11,800 mm, loading platform length 8,350 mm, Knorr brake EBS 4s/2k (ASR), rear support legs foldable 25,000 kg, pneumatic valve for adjustment of 4 wheel blockers, electric winch with remote control, 3x2 lashing rings in the outer platform frame (8t), aluminium frame L: 2,300 mm - W: 500 mm, hot-dip galvanized, toolbox, rollers on the loading platform, extendable bumper, ramp holder.
Hfodpfxjih E Hys Ag Ijg
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi 2 P. Radmulden-hydr. Rampen
Pokliči
Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis:
- Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm
- Gooseneck 200 mm with beveled corners
- Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination)
- 2 kingpin positions with replaceable 2" kingpin
- Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted)
- Reinforced frame design / point load at the center of gravity
- Prepared for extendable load platform widenings
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle
- 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers
- Underrun protection = extended end plate
- Drop-down supports at rear
Ramps:
- 2-piece drive-up ramps, custom design, with mechanical extension
- Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit)
Hfsdpowviwkjfx Ag Ieg
- Width approx. 800 mm
- Wood topping
- Incl. traction ribs on ramps
- Can be secured for travel with tension belts
- Operated by manual lever mounted rear right in direction of travel
- Hydraulically laterally shiftable
Floor:
- 35 mm larch wood floor with aluminum omega profiles
Landing Gears:
- Mechanical 24 t landing gears, operated from one side with load equalization
Axles, Steering, and Tires:
- BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lift and lower device, total stroke approx. 200 mm
- 2nd drive position via ball valve +50 mm
- 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer
- 3rd axle as friction steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, center-fitted offset
- 12 tires 245/70 R 17.5 143/141J, tubeless
- Including tire pressure monitoring
Accessories:
- Plug-in side walls and rear wall on gooseneck approx. 400 mm high
- Spare wheel holder
- Lateral aluminum underrun protection
- 4 wheel chocks
- Long license plate holder in end plate
- 1 detachable ECE sign at rear
- 11 pairs ZK modules 10t on the sides:
- 2x on the gooseneck
- 9x on the load platform
- Steel mudguards with clear pass
- Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm
- 4 plug-in holders for warning panels in stake pockets on loading surface
- 6 pairs of lateral stake pockets for 100x50 mm stakes
- 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions)
- 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container
- Rubber apron mounted on underrun protection
- Steel shot blasting, chassis hot-dip galvanized and primed
- Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi 2P. Radmul.-Federhebewerkra.
Pokliči
Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis:
- Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm
- Neck of frame 200 mm with beveled corners
- Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper)
- 2 king pin positions with replaceable 2" king pin
- Outer frame closed outside as perforated outer frame for lashing with tie-down straps
- Reinforced frame design / point load at center of gravity
- Prepared for extendable width extensions in the loading area
- With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle
- 1 pair of wheel recesses in front of axle with steel covers
- (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers
- Underrun protection = extended end plate
- Drop-leg supports at rear
Ramps:
- 2 pieces, single-part aluminium loading ramps with spring lift system
- Dimensions (L x W) approx. 2,500 mm x 600 mm
- Can be locked in transport position with tie-down straps
- Laterally adjustable by hand
Floor:
- 35 mm larch wood floor with aluminium omega-profiles
Landing Gear:
- Mechanical 24 t landing gears with single-sided operation and load compensation
Axles, Steering, and Tyres:
- BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm
- S-cam brakes 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lift/lowering device with total travel approx. 200 mm
- 2nd driving position via ball valve +50mm
- 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer
- 3rd axle is friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring
Brake System:
- Two-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Air connections yellow / red
Paintwork:
- Steel shot-blasting, chassis spray galvanising and priming
- Chassis / wheel hub / outer frame painted in DB 7350 Novagrau
- Plastic parts black, unpainted
- Rims: factory silver
- Reflective strips on sides and rear in yellow
Accessories:
Hfedpfx Agswu Agio Ieg
- Removable side and rear walls approx. 400 mm high on gooseneck
- Spare wheel bracket
- Aluminium bump guard
- 4 wheel chocks
- Sheet metal mudguards with Clear-Pass
- Long licence plate holder in end plate
- 1 removable ECE board at rear
- 11 pairs ZK modules 10 t at sides:
- 2x on gooseneck
- 9x on loading area
- Without tow rings at rear
- Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm
- 4 mounting holders for warning boards plug-in type in stake pockets on loading area
- 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes
- 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions)
- 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle)
- 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container
- Rubber apron fitted on underrun protection
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Pokliči
Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis:
- Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm
- Gooseneck height 200 mm with beveled corners
- Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel)
- 2 kingpin positions with interchangeable 2" kingpin
- Outer frame closed outwards as slotted rail for lashing with tie-down straps
- Reinforced frame design / point load at center of gravity
- Provisions for extendable deck wideners
- With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle
- 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers
- Underride protection = extended end plate
Hsdpfx Agswu A Sls Iofg
- Hydraulic drop-down supports at rear
Floor:
- 35 mm larch timber floor with aluminum omega profiles
Axles, Steering, and Tyres:
- BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering device, total lift approx. 200 mm
- 2nd driving height via ball valve +50mm
- 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical locking
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring system
Braking System:
- Dual-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Pneumatic connection yellow/red
Paintwork:
- Steel shot blasting, spray galvanising of chassis and primer
- Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau
Accessories:
- Removable side and rear boards on the gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Steel fenders with Clear-Pass
- Long license plate holder in end plate
- 1 removable ECE plate at the rear
- 11 pairs ZK modules 10t lateral:
- 2x on the gooseneck
- 9x on the loading platform
- Without rear towing eyes
- Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width
- 4 insertable sockets for warning signs in stake pockets on loading platform
- 6 pairs stake pockets along sides for 100x50 mm stakes
- 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions)
- 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle)
- 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container
- Rubber skirt mounted on underrun protection
- Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps
- Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft
Optional: Trailer available with aluminum folding ramps.
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Oppenau
577 km
Polpriklopnik za hlodovino
DOLL2-Achs-Sattelauflieger LOGO21
Pokliči
Stanje: novo, največja dovoljena obremenitev: 30.400 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 15.215 mm, skupna širina: 2.550 mm, skupna višina: 1.640 mm, Leto izdelave: 2025, Oprema: ABS, 2-axle semi-trailer LOGO 21
* Air suspension
* 2 single axles, BPW brand, 12 t with drum brakes
* Manual landing gear
* 8 x DOLL Mammut bolsters and stakes
* Tires 315/80 on steel rims
* EBS-E braking system
* LED tail lights with integrated triangular reflector
* 4x LED work lights (1,800 lumens)
Hedpjgqc Hfofx Ag Ijfg
* BEKA-MAX central lubrication pump
* 2x snow chain holders
* RAL 9011 graphite black (frame + bolsters), RAL 3002 carmine red (stakes)
* Side underrun protection according to ECE R73
* All add-on parts according to EC directive
Various additional equipment available.
Further information upon request.
Images may differ from the original. Specifications subject to change without notice.
Contact:
Niclas Lott
Tel.:
Mali oglas
Oppenau
577 km
Polpriklopnik za hlodovino
DOLL3-Achs-Sattelauflieger LOGO 12
Pokliči
Stanje: novo, največja dovoljena obremenitev: 33.570 kg, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.450 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, DOLL 3-Achs Sattelauflieger LOGO 12
* Stirnwand aus Feinkornstahlblech, ausgelegt nach DIN EN 12642 Code L
* Verschweißte Stahl-Tränenblech-Abdeckung
* 3 Einzelachsen, Fabrikat SAF, 9 t Scheibenbremsen Intradisc CD
* 1. Achse als Liftachse
* Luftfederung mit Heben & Senken über Drehschieberventil
* Handmechanische Abstützung
* 8 x DOLL Mammut Schemel und Rungen
* Bereifung 385/65 R 22.5 auf Stahlfelgen
* LED Schlußleuchten mit integriertem Dreieckrückstrahler
* 4x LED Arbeitsscheinwerfer (1.800 Lumen)
* RAL 9011 Graphitschwarz (Rahmen + Schemel), RAL 3002 Karminrot (Rungen)
* COC-Dokument
Verschiedene schraubbare Zusatzausstattungen wie z. B. Werkzeugkasten, Zusatzabstützung, Aufstieg sind gegen einen Mehrpreis erhältlich.
Weitere Informationen auf Anfrage.
Abbildungen können vom Original abweichen. Angaben ohne Gewähr.
Kontakt:
Niclas Lott
Tel.:
ENGLISH:
DOLL 3-axle semi-trailer LOGO 12
* Front wall constructed from fine-grain steel sheet, designed according to DIN EN 12642 Code L
* Welded steel checker plate cover
* 3 single axles, SAF brand, 9 t Intradisc CD disc brakes
* 1st axle liftable
* Air suspension with raise/lower function via rotary lever valve
* Manual mechanical landing legs
* 8 x DOLL Mammut bunks and stanchions
* 385/65 R 22.5 tyres on steel rims
* LED tail lights with integrated triangular reflector
* 4x LED work lights (1,800 lumens)
* RAL 9011 graphite black (chassis + bunks), RAL 3002 carmine red (stanchions)
* COC (Certificate of Conformity) document
Various bolted optional features such as toolbox, additional supports, and access ladder available at extra cost.
Further information on request.
Images may differ from actual product. Information subject to change.
Contact:
Niclas Lott
Tel.:
FRENCH:
Semi-remorque DOLL à 3 essieux LOGO 12
* Paroi avant en tôle d’acier à grains fins, conçue selon la norme DIN EN 12642 Code L
* Couvercle de plancher en tôle larmée soudée
* 3 essieux simples SAF, freins à disque Intradisc CD 9 t
* 1er essieu relevable
* Suspension pneumatique à commande montée/descente par vanne rotative
* Béquilles mécaniques manuelles
* 8 x chevalets et montants DOLL Mammut
Hfjdpfx Agex Egtls Ijg
* Pneus 385/65 R 22,5 sur jantes acier
* Feux arrière LED avec réflecteur triangulaire intégré
* 4 x projecteurs de travail LED (1 800 lumens)
* RAL 9011 noir graphite (châssis + chevalets), RAL 3002 rouge carmin (montants)
* Document COC
Différents équipements vissés optionnels tels que boîte à outils, supports supplémentaires et échelle disponibles en supplément.
Pour plus d’informations, merci de nous contacter.
Les visuels peuvent différer du produit réel. Informations sans garantie.
Contact :
Niclas Lott
Tel.:
POLISH:
Naczepa 3-osiowa DOLL LOGO 12
* Ściana przednia z drobnoziarnistej blachy stalowej, zgodna z DIN EN 12642 Kod L
* Spawana stalowa pokrywa z blachy ryflowanej
* 3 osie pojedyncze, marka SAF, hamulce tarczowe Intradisc CD 9 t
* Pierwsza oś podnoszona
* Zawieszenie pneumatyczne z podnoszeniem i opuszczaniem za pomocą zaworu obrotowego
* Mechaniczne, ręcznie rozkręcane podpory
* 8 x kłonice i słupki DOLL Mammut
* Opony 385/65 R 22,5 na stalowych felgach
* Tylne światła LED ze zintegrowanymi trójkątnymi odblaskami
* 4x lampy robocze LED (1800 lumenów)
* Kolor: RAL 9011 grafitowa czerń (rama + kłonice), RAL 3002 karminowa czerwień (słupki)
* Dokument COC
Różne przykręcane opcje dodatkowe, jak skrzynka narzędziowa, dodatkowe podpory, drabinka, dostępne za dopłatą.
Dalsze informacje na zapytanie.
Zdj
Mali oglas
Oppenau
577 km
Polpriklopnik za hlodovino
DOLL3-Achs-Sattelauflieger LOGO 14XL
Pokliči
Stanje: novo, največja dovoljena obremenitev: 35.585 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.950 mm, višina nakladalnega prostora: 1.347 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, 3-axle semi-trailer LOGO 14XL
Specifically designed for OFF- and ON-ROAD applications!
* Electronic air suspension
* 3 single axles, manufacturer SAF, 9 t, with disc brakes
* 1st axle liftable, 3rd axle trailing and steered
* Radio remote control for operating the frame locking system and the brake
* Manually operated landing gear
* Bolster: 8x ExTe D7 (position 1 with double pockets, position 2 adjustable and with flat stake pockets as well as quick-release wedge system)
* Stakes: 14x ExTe D7 telescopic stakes, 2x ExTe D10 telescopic stakes
* Tyres: 385/65 R 22.5 on steel rims
* EBS braking system
* LED rear lights with integrated triangular reflectors
* 4x LED work lights (1,800 lumens)
* Air tanks made of aluminium
* 1x grab rope
* 1x shunting coupling
* Frame and bolster in RAL 9011 graphite black
* All attachment parts according to EU regulations
Hfsdpfsgqc Eaex Ag Ieg
Various additional equipment available.
Further information upon request.
Images may differ from original. Subject to alteration.
Contact:
Niclas Lott
Tel.:
Mali oglas
Oppenau
577 km
Polpriklopnik za hlodovino
DOLL3-Achs-Sattelauflieger LOGO 14X
Pokliči
Stanje: novo, največja dovoljena obremenitev: 35.700 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 10.735 mm, skupna širina: 2.550 mm, Leto izdelave: 2025, Oprema: ABS, 3-Axle Semi-Trailer LOGO 14X
Specially designed for OFF- and ON-ROAD OPERATIONS!
* Electronic air suspension
* 3 single axles, SAF brand, 9 t capacity with disc brakes
* 1st axle liftable, 3rd axle with trailing steering
* Remote control for operating chassis lock and brakes
* Manual mechanical support legs
* Bolster: 8x ExTe D7 (Position 1 with double pockets, Position 2 adjustable with flat stanchion pockets and quick-release wedge system)
* Stanchions: 14x ExTe D7 telescopic stanchions, 2x ExTe D10 telescopic stanchions
* Tires: 385/65 R 22.5 on steel rims
* EBS braking system
* LED tail lights with integrated triangle reflector
* 4x LED work lights (1,800 lumens)
* Aluminum air reservoir
* 1x grapple rope
* 1x shunting coupling
* Frame + ExTe D7 bolster painted RAL 9011 graphite black
* All attachments according to EU regulations
Various additional equipment available.
Further information upon request.
Images may differ from the original. Specifications subject to change.
Hfedpfx Agshnak Ie Iog
Contact:
Niclas Lott
Tel.:
Olajšamo vam iskanje: "faymonville 5-achs-doppel-tele-semi-sattelauflieger"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.

Izvedite več zdaj
+49 201 858 95 507
+49 201 858 95 507
Objavite oglas zdaj
*na oglas/mesec



















































































































































































































































































