Polpriklopnik z nizko nakladalno ploščadjo

Semi Trailer 19 AF 1-Achs Tieflader Plane

Stanje: novo, največja dovoljena obremenitev: 38.100 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 760 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R17.5 3PMSF, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10° Rjdpfx Anetphtme Eot 3 pairs of lashing rings 30 mm thick hardwood flooring Loading platform: 5 pairs of fold-out lashing rings 3 pairs of fold-out lashing rings 1 pair of horizontal lashing rings at the front of the loading area Cut-outs in the outer frame of the loading surface for hooking in tension belts Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing legs: JOST landing legs with 2-speed gears for a 24 t lifting capacity Axles and tyres: BPW axles, two axles are fixed, two axles are self-steering, air-suspended, with drum brakes, with lift/lower function The self-steering axles come with an electro-magnetic reverse lock, which is activated via reverse gear or manually Axle toolkit Tyres: 205/65 R17.5 3PMSF Brake system: WABCO brake system according to EU regulations with EBS-E Steel construction: Steel structure made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical equipment: Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDIK lighting ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame ensured by a 2-component zinc dust primer High-quality single-colour 2-component top coat in MB 7350 Novagrau No metallic paint possible Rear section metallized and painted in RAL 9010 Accessories included: 1 spare wheel 205/65 R 17.5 TPMS tyre pressure monitoring system acc. to ECE R 141 At the galvanized front connection strip yellow-red air couplings 4 wheel chocks with holder on front wall Bracket at rear of gooseneck for ALU access ramps Galvanized folding supports under the chamfer of the loading surface Mount for a revolving beacon at the rear of the trailer Height-adjustable curtain structure Galvanized front wall with a tension mechanism for the sliding curtains Height-adjustable by approx. 400 mm "EDSCHA" brand roof, sliding forward on ALU roof beam profiles, bolted to the front and rear wall In the loading surface, 3 pairs of sliding stakes Superstructure at rear hydraulically extendable to left and right by approx. 750 mm Sliding roof with upward swinging portal carrier Sliding tarp with 700 mm reserve length, with tension straps at intervals of approx. 600 mm Height to top edge of superstructure approx. 3,960 mm Journeys with the sliding roof open are not permitted and will damage the tarp Mounting rail for ALU access ramps at the rear of the vehicle At the gooseneck and at the rear panel left and right, each with a mount for warning signs incl. socket A mud flap at the rear of the trailer European reflector plates at the rear of the trailer 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading area Lifting axle on the front axle controlled by TEBS E depending on current axle load and load status Rear structure with closed ALU double-wing doors A sanded, anti-slip paint layer on the checker plates on the gooseneck and on the loading surface BEKAMAX centralized lubrication system with standard grease NLGI-2 and a removable guard around the pump Speed stickers 80 km/h on rear and both sides Load manometer for axle load determination including load chart

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Fuhrpark, lastna masa: 6.000 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 26.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, velikost pnevmatike: 205 / 65 r 17,5, Further Information Fine-grained steel welded construction, fifth wheel plate with replaceable 2-inch kingpin. Reinforced pickup point for gallows-mount, equipped with sturdy wear plates all around; channel profile from flat steel beneath the outer frame. Outer frame slightly tapered with load-lock profile for securing lashing straps. Note: To attach straps in combination with sidewalls, the sidewalls must be open! 24-ton two-speed landing gear, one-sided operation, with straight lower section, without compensating slide. Wheel chocks with holders, aluminum side underrun protection, set inwards as far as technically possible; steel rear underrun protection for maximum ground clearance; quarter-shell fenders in front of and behind each axle; hook-in rail for aluminum ramps at the rear; plastic toolbox with shelf insert (width=620 mm/height=360 mm/depth=440 mm), lockable with padlock (padlock not included). SAF drum brake axles, with axle stops; wheelbase 1,600 mm; air suspension with raise/lower valve. Rjdemp Ug Dopfx An Ejt 205/65 R17.5, twin steel rims, factory silver finish. 2-line compressed air brake system, spring-loaded parking brake, two non-interchangeable coupling heads at the front, without connecting line; EBS (Electronic Braking System) with EBS socket at the front, no connection cable. Warning: The trailer must only be towed by towing vehicles that support proper ABS function! 24 volt, multi-chamber lights, integrated yellow side LED lighting in outer frame profile, set approx. 25 mm inwards, 10 per side. 2 white position lights at the front, protected; 2 white/red marker lights at the rear; additional LED work light at the rear, connected to reversing light. Two 7-pin and one 15-pin non-interchangeable sockets at the front, no connecting cables. Phenolic plywood flooring approx. 30 mm thick for high point load capacity, suitable for forklift axle loads up to max. 5,600 kg. Special flooring installation: testing of new profiles, no screws. In wheel arch area: steel/chequer plate overlay. Front bulkhead/corner posts made from 25 mm aluminum hollow profile, approx. 800 mm high; steel corner posts, heavy-duty version, with windows on both sides. Country of registration: Germany, with Dekra inspection and certificate (according to §13 EC – FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective tape in accordance with ECE R048, white on the sides and red at the rear.

Stanje: rabljeno, prva registracija: 01/2012, * Curtain-sided body * Low loader * Curtain / tarpaulin * Body (superstructure) * Variable curtain-sided body for low loader Rodpfslmicmjx An Eot * Removable * 12.45 m x 2.40 m x 2.60 m + 50 cm (internal) * Immediately available * Subject to errors and prior sale We offer: Net purchase for EU companies with VAT ID number as well as customers from third countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port. All prices listed on classifieds are gross prices and already include the statutory VAT of 19%.