Autotransporter Sofort Verfügbar Mit 3 Achs Fahrzeugtransporter nakup rabljenega (43.134)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Egestorf
860 km
Polpriklopnik z nizko nakladalno ploščadjo
MÜLLER-MITTELTAL3- achs Sattel.-Luft-Lenk,hydr. Rampe mit Gummi
Pokliči
Stanje: novo, največja dovoljena obremenitev: 38.290 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * TS 3 Profile 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW Eco Plus axles
* Last axle trailing steered with electro-pneumatic steering lock
----Suspension:
* Air suspension with lift-and-lower function and RtR valve
----Electrics / Lighting:
* TPMS (Tire Pressure Monitoring System)
* Smartboard control box mounted on the trailer as an infotool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting system 12 / 24V
* Removable LED beacon, rear left
----General Attachments:
* Side underrun protection
* Landing gears at the front as well as mechanical swing-down supports at the rear of the chassis
* Straight sheet steel mudguards
* Spare wheel holder under the chassis on the right side
----Low Loader Deck:
* Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized sheet steel W = 2,480 x H = 500 x L = 665 mm with folding lid
* 400 mm aluminium side boards (RAL 9010 pure white) on the gooseneck, foldable and removable
* Rear wall – 150 mm – fitted
* Rear slope at the gooseneck platform to the low-bed approx. 700 mm long
* Gooseneck platform with 50 mm timber planks, low-bed platform with 60 mm timber planks
* Tread plate over the axles
Iedpfx Aisy Ngz Hjcjau
----Extensions:
* 8 x mechanical fold-out extensions to 3 m total width, but not on the rear slope (extension planks present with storage on gooseneck platform)
* Mechanically adjustable warning sign packages front and rear
----Load Securing (Lashing Package):
* On the gooseneck platform: 2 x 6.3 t lashing rings each side and 3 x 5 t lashing bars per side in the outer frame
* On the low-bed platform sides: 2 x 13.4 t lashing rings each, and 4 x 10 t swivel and lowerable lashing rings recessed in the outer frame
* 2 x 6.4 t lashing eyes per side and rear 1 lashing ring in the excavator arm recess
* 2 x container locks directly after the gooseneck in the low-bed platform
----Excavator Arm Recess:
* Excavator arm recess from end of last rigid axle, over steering axle to end crossmember, continuous, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm
----Loading Ramps:
* Mechanically one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways)
* 4-way control block for later customer retrofit of hydraulic ramp shifting
* The outer board of the ramp consists of 50 mm hardwood
* Climbing strips on the outer frame of the ramp as well as on the drive-up slope
* Rubber on the ramp and drive-up slope
----Hydraulics:
* Hydraulic flow divider in the trailer (for hydraulic pump capacity in the truck from 40 up to 120 l/min)
----Loading Dimensions:
* Loading area, gooseneck platform: approx. 3,935 x 2,480 mm
* Low-bed loading area: approx. 8,500 x 2,520 mm
* Loading height unladen approx. 910 mm (incl. 860 mm drive-up slope)
----Fifth Wheel Height:
* Approx. 1,220 mm (suitable for 2- and 3-axle tractor units)
----Paintwork:
* Chassis, loading ramps, rear folding supports, extension brackets hot-dip galvanized
* Axles, landing gears, air reservoirs painted in a black tone
* Vehicle is hot-dip galvanized
----Information:
* New vehicle with manufacturer’s warranty
* Subject to errors and prior sale
* Sample images may include features not part of the offered vehicle
* Sample images
----Delivery time:
* tba
Mali oglas
Egestorf
860 km
Prikolica
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Pokliči
Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports
----Braking system:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axle:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lifting and lowering function
----Drawbar:
* Drawbar 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tire pressure monitoring with display option via EBS signal in the truck cabin – no installation required on the truck side
Isdpfx Aisx Nlkaecsau
* 15-pin power connector
* 2 additional LED reversing lights (switched via reverse gear)
* LED lighting
----General Fittings:
* Aluminum air reservoir
* Stainless steel tool box, approx. 1,000 x 300 x 600 mm, mounted on the side
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun protection
----Flatbed:
* Zurr-fix outer frame, 45° angled, drilled for lashing equipment, lashing capacity per lashing point 2,000 kg at 480 mm intervals
* Installation of 3,000 kg drop lashing rings possible at approx. 600 mm intervals – 12 pcs 3,000 kg lashing rings per side included
* 5 pockets per side for pipe stakes (100 x 50 mm) in the outer frame (stakes not included)
* 30 mm phenolic plywood floor
----Drum Supports:
* 3 galvanized drum supports, secured by container locks, with side forklift pockets, center/center 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm
* Clear width between support arms approx. 1,775 mm, with transverse brace
* Maximum drum weight per support 6,000 kg
* Without drive and drum brake
* Support arm with tension lock for securing the drum shaft
* Steel drum shaft, 76 mm diameter, with centering and rotatable ends
* 2 collar rings
* 2 centering cones made of polyamide
* 4 pcs 3.2 t lashing eyes on the support arms for customer-provided drum securing against turning and unspooling
----Loading height:
* Approx. 1,040 mm when loaded
----Coating:
* Chassis, bogie, drawbar, outer frame, rear under-run protection hot-dip galvanized
* Axles painted in a black shade
Mali oglas
Egestorf
860 km
Polpriklopnik z nizko nakladalno ploščadjo
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 37.560 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0:
----Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Moving-off aid for shunting, connected to the first axle via EBS (no installation required on the truck side)
* Last axle as self-steering trailing axle with electro-pneumatic lock
* Trailing axle lock for shunting purposes, activated from the cab via EBS (no installation required on the truck side)
----Suspension:
* Air suspension with lifting and lowering system, including RtR valve
----Electrics / Lighting:
* Smart-Board infotool mounted on trailer with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12 / 24 V
* Removable LED beacon at rear
* 2 additional LED reversing lights
* 7-pin socket at rear for overlength lighting
* Side marker lights with indicator circuit
* Tire pressure monitoring with display in the truck via EBS signal (no installation required on the truck side)
----General Attachments:
* Side underrun protection
* Landing gear at front, swing supports at rear of the chassis
* Straight steel fenders
* Spare wheel carrier in front of front wall crossmember (spare wheel not included)
* Mechanically adjustable warning sign packages at front and rear
* Swing arm as carrier for connection lines from truck to trailer
----Low Loader Deck:
* 2nd kingpin position
* Saddled platform with 45° chamfered front corners and front toolbox made from galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with folding lid
* 400 mm high drop-down/removable aluminium sideboards (custom RAL color) on saddle platform
* Removable 150 mm high rear wall
Iasdpfsykx Nqjx Aiceu
* Rear inclined ramp of approx. 700 mm at the end of saddle platform to low-bed deck, fitted with checker plate and lashing bar for attaching aluminium approach ramps
* Saddle platform with 50 mm tongued-and-grooved timber floor, low-bed platform with 60 mm tongued-and-grooved timber planks
* Tread plate above axles
* 9 x mechanical folding extensions to 3 m overall width, but not on rear ramp (extension planks included with lockable transverse storage compartment under load area)
* Preparation for 3 ramp storage compartments under saddle platform for either aluminium ramps or timber planks for wheel trough covers
* Preparation for container locks on the gooseneck
----Load Securing (LaSi Package):
Saddle Platform:
* Perforated external frame, angled at 45°, with hole pattern for lashing equipment (2 t lashing capacity per point, minimum spacing 480 mm)
* 3 x 13.4 t recessed tie-down rings per side (1 on saddle platform, 1 on main longitudinal beams after the step, 1 above the center axle beside the beam)
Low-bed Deck:
* 3 x 13.4 t tie-down rings per side on outer frame (1 at the start of the gooseneck, 1 at the start of the rear ramp, 1 at the end of the ramp)
* 2 x 10 t tie-down rings per side (1 between front wheel-well and 1st axle, 1 between 2nd and 3rd axle)
* 3 x 5 t tie-down rings per side, bolted to the outer frame of wheel wells (2 at front, 1 at rear wheel well)
----Digger Arm Rest:
* Extended digger arm rest from end of last fixed axle over steering axle to end crossmember, continuous with internal reinforcement profile, approx. W = 770 mm x D at rear


Prodaja več kot 4 milijonom zainteresiranih na mesec
Mali oglas
Egestorf
860 km
Polpriklopnik kiper
MEILLER3-achs Halbschalenmulde mit E- Schiebeverdeck
Pokliči
Stanje: novo, največja dovoljena obremenitev: 28.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.500 mm, prostornina tovornega prostora: 25 m³, Leto izdelave: 2026, Oprema: ABS, Brake system:
* Wabco EBS-E / ABS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* 22.5" disc brakes
* Paver brake with shortened rear mudguards and manual paver switch
Axles:
Iaedpfer Exzmjx Aicou
* 3 x 9 t BPW axles
* 1st lift axle with start-up aid
Suspension:
* Air suspension with automatic lowering during tipping process (for increased stability, deactivation possible for pavers)
Electrics / Lighting:
* Tire pressure monitoring system (TPMS)
* 1 x 15-pin trailer socket
* 5-chamber tail lights with protective cover
* 1 x additional LED work light
* Flashing side marker lights
General Attachments:
* Aluminium air tank
* Jost telescopic steel landing legs with plate foot (uncoupling only when empty)
* 4 m aluminium access ladder, stored on the right side above the mudguards
* Enclosed plastic single mudguards
* Folding underrun guard
* Rear towing eye
* Folding access ladder on the front left side
* Document box on the front wall
Frame:
* Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members
Tipping Body:
* Half-shell steel rear tipper body (front hydraulic ram with medium working pressure)
* Front wall with 600 mm front roof as tarpaulin carrier
* Side walls with robust, continuous, inward-sloping top rail
* Slanted front and rear wall
* Overlapping tailgate with rubber seal and two additional toggle fasteners as well as automatic 2-hook locking system
Thickness of bottom, side walls, front and rear wall:
* Front wall 4 mm BS 70 steel
* Tailgate 4 mm HBW 400 steel
* Side walls 4 mm HBW 450 steel
* Tailored floor of 5/6 mm Hardox 450 steel
Tarpaulin:
* Electric sliding tarpaulin – RAL 9006 white aluminium – with switch on chassis and remote control
Load volume:
* Approx. 25 m³
Saddle height:
* Unladen: approx. 1,247 mm
* Laden: approx. 1,217 mm
Painting:
* Chassis painted RAL 7021 black grey
* Tipping body in RAL 9006 white aluminium
General Information:
* Permissible gross weight technically possible up to 39,000 kg
* Errors and prior sale reserved
* New vehicle with manufacturer's warranty
Delivery time:
* Immediately available ex works Egestorf on the A7
Mali oglas
Egestorf
860 km
Prikolica
MÜLLER-MITTELTAL3-achs Plateu Anhänger, mit 3 Kabelböcken
Pokliči
Stanje: novo, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TP 30.0 with 3 cable drum supports
----Braking System:
* Wabco TEBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t Gigant axles
----Suspension:
* 17.5" air suspension with lifting and lowering function
----Drawbar:
* Drawbar, 1,800 mm long with 40 mm towing eye
----Electrics / Lighting:
* Tyre pressure monitoring system with display capability in the truck dashboard via EBS signal - without truck-side installation -
* 15-pin power connector
* 2 additional LED reversing lights (activated by reverse gear)
* LED lighting
----General Fittings:
* Aluminium air tank
* Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm
* Side underrun protection
* Plastic quarter mudguards
* Rear underrun guard
----Platform Bed:
* Zurr-fix outer frame, 45° edged with hole pattern for lashing equipment, lashing force per point: 2,000 kg at 480 mm spacing
* Option to install 3,000 kg drop lashing rings at approx. 600 mm intervals – as standard, each side fitted with 12 x 3,000 kg lashing rings
Iaedpfxex Nlkge Aicju
* Each side with 5 sockets for stakes 100 x 50 mm in the outer frame – stakes not included in delivery
* 30 mm phenolic plywood floor
----Drum Supports:
* 3 galvanised drum supports secured via container locks, with lateral forklift pockets, centre-to-centre 800 mm (pocket width 185 mm)
* Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm
* Clearance between support arms approx. 1,775 mm, with crossbeam
* Maximum drum weight per cable drum support: 6,000 kg
* Without drive and without drum brake
* Support arm with locking device for securing drum shaft
* 76 mm diameter steel drum shaft with centring and rotatable ends
* 2 set collars
* 2 centring cones made of polyamide
* 4 x 3.2 t lashing eyes on support arms for customer-side securing of drum against rotation and unwinding
----Loading Height:
* Approx. 1,040 mm loaded
----Coating:
* Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanised
* Axles painted in a shade of black
----Information:
* Technical upgrade to 30 t GVW possible
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery Time:
* Available from approx. CW 51 / 2026
Mali oglas
Leezen
922 km
Prikolica za prevoz konj
BÖCKMANNTraveller G 3 sofort verfügbar.
Pokliči
Stanje: novo, skupna masa: 3.500 kg, Leto izdelave: 2023, Böckmann Traveller G3 for 1–4 horses, with tack room.
The trailer is NEW and immediately available.
Permissible total weight: 3,500 kg.
Subject to errors and change.
* NET SALE POSSIBLE
* TOP leasing offer available
* IMMEDIATE AVAILABILITY
Location and viewing of our vehicles:
Iaedpfx Aijv N Szmscou
STX HORSETRUCKS GERMANY
Hamburgerstrasse 61
23816 Leezen
Sales and service for all brands
in the field of horse transporters and trailers.
Viewing by appointment only—please contact Richard Theurer or Andreas Theurer.
Mali oglas
Delbrück
783 km
Keson prikolica
Ackermann3 Achs Kofferanhänger mit LBW KA-F24/8.3E
Pokliči
Stanje: rabljeno, lastna masa: 6.080 kg, največja dovoljena obremenitev: 17.920 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2011, naslednji pregled (TÜV): 09/2025, dolžina tovornega prostora: 8.080 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 2.146 mm, prostornina tovornega prostora: 43 m³, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5, barva: bela, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385 / 65 R 22,5, velikost zadnje pnevmatike: 385 / 65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, dvižna zadnja plošča, Osnovna barva: bela
Dodatna oprema
ABS, nakladalna ploščad, zračno vzmetenje, kolutna zavora, vzmetenje: zračno-dvigljivo, nosilnost (kg): 17920
Iodpfx Aex Swdqoicoau
Tip nadgradnje: 3-osna škatlasta prikolica L x Š x V 8.080 x 2.500 x 2.146 mm, nakladalna ploščad BÄR BC 1.500 S 4, aluminijasta pločevina 1.600 mm, 3 vrste priveznic desno in levo, 8 vrst priveznic v tleh in strehi, osi Mercedes Benz z zračnim vzmetenjem s funkcijo dviga in spusta, ABS, elektrika 24 V - 15 polna, zračni priključek Duomatic, vlečni drog z ušesom 40 mm
Mali oglas
Dorsten
847 km
Polpriklopnik za prevoz živine
PEZZIOLISBA31-SR 3 Stock "Neu" Sofort Verfügbar
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 27.600 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2026, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.100 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles
Expertise and Service from a Single Source
WS Trucks GmbH is your trusted partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer you an extensive range of new and used trucks, livestock transporters, refrigerated vehicles, trailers, and semi-trailers.
---
* Pezzaioli SBA 31 SR
* 3-tier pig transporter / 2-tier cattle transporter
* Low-profile design with wheel wells
* Drinking troughs
* Fans
* GPS
* Lift axle
* Hydraulic tailgate
* Onboard power unit
* Michelin tyres 245/70 R17.5
Subject to errors and prior sale
---
Our Service to You:
* Tailored Consulting: We take the time to understand your needs and find the right vehicle for you.
* Financing: We offer you attractive financing and leasing options.
* Trade-in: We provide fair valuation and accept your used vehicle as payment.
* Registration & Deregistration: We take care of the complete registration process for your new vehicle as well as deregistration of your old one.
* Complete Export Handling: We manage all customs procedures.
* Maintenance & Repairs: Our specialist workshop handles the maintenance and repair of your vehicle.
Your Advantages:
Ijdpezax S Rjfx Aicoau
* Expertise: We are commercial vehicle specialists and are familiar with the market.
* Reliability: We keep our promises and support you with advice and service.
* Comprehensive Service: We offer complete service from a single provider.
* Quality: We only offer high-quality vehicles from reputable manufacturers.
Our Core Competence: Livestock and Meat Transport Vehicles
* Comprehensive Know-How: We understand the specific requirements for livestock and meat transport and are happy to advise you on the right vehicle.
* Wide Selection: We provide a large selection of vehicles from various manufacturers and price segments.
* Quality: We only offer high-quality vehicles from reputable manufacturers.
* Comprehensive Service: From consulting and financing to maintenance and repairs, we offer full service from one source.
Krone Trailer Partner
WS Trucks GmbH is a Krone Trailer Partner. As a Krone Trailer Partner, we offer you a wide range of new and used Krone semi-trailers.
Menke-Janzen Partner
WS Trucks GmbH is also a partner of Menke-Janzen Fahrzeugbau. As a Menke-Janzen Partner, we provide a large selection of new and used livestock transporters. We support you with planning and implementation of your new livestock transporter from 3.5 t to 40 t.
For more information:
Website:
* Phone:
* Email:
WS Trucks GmbH: Your Partner for Commercial Vehicles
Mali oglas
Neuss
830 km
Drugo
OtherHunde Transport Anhänger TomDog 3 mit Lüfter isoliert 100kmh verfügbar
Pokliči
Stanje: kot nova (razstavni stroj), lastna masa: 300 kg, skupna masa: 750 kg, Za nakup tega priklopnika za prevoz psov imejte prosim pripravljeno številko oglasa in prosim dogovorite termin na tel. št. 02131 595 4218!
Termini za nakup / prevzem po telefonski dogovoru ali v sklopu skladiščne razprodaje.
Ijdpfjy Ubxwsx Aiceau
Preprosto in zanesljivo poslovanje zagotovljeno!
Primer nezavezujoče: 3 boksi in shranjevalni prostor, notranji prostor 2x1x1 cm, 750 kg V podvozje, gumirano vzmetenje, nebrzdano, primerno za 100 km/h, sendvič stene 30 mm izolirane, bele gladke, zadnja vrata zaklenljiva, stranski ventilatorji, aerodinamični del iz poliestra kot sprednji del in streha bele barve, strešni ventilator električni 12 V prek DP, vezana plošča tal 15 mm, ročne podpornice, podporno kolo, okrasni pokrovi koles itd.
Cena iz skladišča Neuss, vse vključeno:
Zgradba odporna proti škropljenju vode.
COC dokumenti, tehnično poročilo TÜV Rheinland ali partner vključen.
skladišče 21-26 la5
Mali oglas
Twist
919 km
Odprta polprikolica s ponjavo
WEB-TRAILER3-Achs Schiebeplane mit XL-Zertifikat (opt. LBW)
Pokliči
Stanje: novo, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.730 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2026, Oprema: ABS, PRSSQ 27 SYS Three-axle Curtainsider with Crosswise Laminated Timber Floor
Curtainsider body height laterally: 2,650 mm (from loading platform to lower edge of outer beam)
Chassis width approx. 2,480 mm
Chassis length approx. 13,620 mm
Ride height unladen approx. 1,250 mm at 1,130 mm fifth wheel height
COC
Chassis frame construction made of welded longitudinal beams and through-fitted cross members
Outer frame height approx. 125 mm, 4 mm with groove for lashing rings & lashing holes on the outside
13 pairs of lashing rings (5t certificate)
Axles: Manufacturer’s free choice (SAF/BPW)
Axle 9t 22.5" with large disc brakes
EBS brake system by Knorr or Wabco
Tire pressure monitoring system
Flashing side marker lights
European brand tires 385/65 R 22.5
Body certificate DIN EN 12642 XL valid with two rows of timber slats
Certificate for 9t forklift axle load (DIN EN 283)
Certificate for 5t per lashing ring
Rear portal with 4 internal locking rods
Door wings made of steel sandwich profiles
Sliding roof with automatic locking, opens from rear
3 sets of side sliding curtains
Front wall: steel, 400 mm steel cassette with inner wear plate approx. 2.4 m
Lighting system: 24 Volt with LED multifunctional lights
Anti-slip phenolic coated floor, 27 mm, crosswise installation
Roof tarpaulin – reinforced 12x12 roof fabric
Optional with tail lift
Optional with internal sideboards
Optional with FLEXSTRAP system
Optional with pallet box, spare wheel, etc.
Body painted in RAL colors as specified
Chassis in RAL 9005 or MB 7350, other colors available at extra cost (subject to powder availability)
KTL coating with zinc phosphating plus powder, highest corrosion protection
Optional: hot-dip galvanized
Price ex works
Iasdpfx Ajg Dkxzeicsu
Attention!
Pictures show special equipment
Get professional advice and a free, no-obligation quote.
Leasing, financing, or hire purchase possible!
We can cater to your individual requirements! Contact us – we are happy to prepare an offer for you.
Errors and interim sale reserved!
Mali oglas
Grevenbroich
825 km
Avtomobilska prikolica
Anssemsdirekt günstig verfügbar Alukoffer mit Deckel GTB 1200 VT 3 153cm Innenhöhe 1200kg gebremst
Pokliči
Stanje: novo, največja dovoljena obremenitev: 850 kg, skupna masa: 1.200 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.260 mm, višina nakladalnega prostora: 1.530 mm, direkt online kaufen auf trailershop
Bei ANHÄNGERWIRTZ viele Modelle online verfügbar
Bequem und rund um die Uhr Online 24/7 kaufen
Selbst abholen oder liefern lassen 😊
Der online Abholmarkt für Ihren neuen Anhänger bietet starke Markenfabrikate!
über 850 Neuanhänger auf Lager
über 130 gebrauchte Anhänger ständig im Angebot.
Iedpsy E E R Eofx Aiceau
unverbindliches Beispiel: verschiedene Versionen verfügbar
Deckelanhänger GTB 1200 VT3 251x126x153 cm 1200kg gebremst Tieflader Einachs V Fahrgestell, Aufbau erhöhte Alubordwände inkl. Zurrsystem mit Ringösen, Deckel abschließbar mit Reling und Hebehilfe, Heckrampe abschließbar abnehmbar, Stützrad, Heckstützen.....
Rechnung ausgewiesene MwSt Garantie - Anhänger Händler seit über 35 Jahren
Verkauf telefonische Bestellannahme zu unseren Öffnungszeiten Montags-Freitags
oder rund um die Uhr über unseren trailershop
Urheberrecht - Markenschutz GTB1200VT3 04/26
Mali oglas
Egestorf
860 km
Priklopnik z delovno ploščadjo
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Start-up aid for maneuvering purposes switched to the first axle via EBS (no installation required on the truck side)
* Rear axle as self-steering axle with electro-pneumatic steering lock
* Locking of the self-steering axle from the driver's cab for maneuvering purposes, controlled via EBS (no installation required on the truck side)
----Suspension:
* Air suspension with lifting/lowering device and Ride-to-Return valve
----Electrics / Lighting:
* Smart Board mounted on the trailer as an information tool with pressure sensors for total axle load display
* 15-pin power connector
* LED lighting 12/24 V
* LED rotating beacon (removable) at the rear
* 2 additional LED reversing lights
* 7-pin socket at rear for extended length lighting
* Side marker lights with indicator signal control
* Tyre pressure monitoring system with display option in the truck via EBS signal (no installation required on the truck side)
----General equipment:
* Side underrun protection
* Landing gears at the front and swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder in front of the front wall crossmember (without spare wheel)
Iaodpfjq Euakjx Aicou
* Mechanically adjustable warning sign packages at front and rear
* Swing arm as carrier for connecting cables from truck to semi-trailer
----Low loader deck:
* 2nd king pin position
* Fifth wheel platform with 45° chamfered front corners and front tool box made of galvanized powder-coated sheet steel B = 2,480 x H = 500 x L = 665 mm with folding lid
* 400 mm high aluminium side boards (in RAL colour of choice) on the sides of the fifth wheel platform, foldable and removable
* Rear wall -150 mm- high plug-in
* Rear slope on fifth wheel platform to low bed approx. 700 mm long with tread plate covering and at the end a perforated strip for attaching aluminium loading ramps
* Fifth wheel platform with 50 mm clamped wooden planks and low bed platform with 60 mm clamped wooden planks
* Tear plate above the axles
* 9 x mechanical folding extensions to 3 m overall width, but not in the rear slope (extension planks available with closed storage compartment across the direction of travel under the loading floor)
* 3 mounting shafts under the fifth wheel platform for storage of optional aluminium loading ramps or wooden planks for wheel well coverings
----Load securing (LaSi package):
Fifth wheel platform:
* Perforated outer frame angled at 45° with hole pattern for lashing points (2 t lashing capacity per point at a minimum spacing of 480 mm)
* 3 x 13.4 t lashing rings each side recessed in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal beams after the drop, 1 x above the centre axle next to the longitudinal beam)
Low loader platform:
* 3 x 13.4 t lashing rings each side on the outer frame (1 x beginning of the drop on the fifth wheel platform, 1 x beginning of the ramp slope, 1 x end of the ramp slope)
* 2 x 10 t lashing rings each side (1 x between front wheel well and 1st axle, 1 x between 2nd and 3rd axle)
* 3 x 5 t lashing rings each side bolted to the outer frame of the wheel wells (2 on the front wheel well, 1 on the rear wheel well)
----Excavator arm recess:
* Extended excavator arm recess from end of last fixed axle through to steering axle up to rear crossmember, continuous with
Mali oglas
Egestorf
860 km
Polpriklopnik z nizko nakladalno ploščadjo
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Pokliči
Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * TS 3 RM ML 30.0:
----Braking system:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 3 x 11 t BPW axles
* Traction aid for shunting purposes engaged on the first axle via EBS (without truck-side installation)
* Last axle as trailing steering axle with electro-pneumatic steering lock
* Locking of the trailing axle from the driver's cab for shunting via EBS (without truck-side installation)
----Suspension:
* Air suspension with lifting and lowering function as well as RtR valve
----Electrics / Lighting:
* Smart Board mounted on trailer as info tool with pressure sensors for total axle load display
* 15-pin electrical connector
* LED lighting 12 / 24 V
* LED rotating beacon (removable) at the rear
* 2 extra LED reversing lights
* 7-pin socket at the rear for additional length lighting
* Side marker lights with indicator activation
* Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation)
----General attachments:
* Side underrun protection
Iodpfx Aetpta Deicoau
* Landing gears at the front and swing-down supports at the rear of the chassis
* Straight steel mudguards
* Spare wheel holder in front of the headboard crossmember (without spare wheel)
* Mechanically adjustable warning sign packages at the front and rear
* Swivel arm as carrier for connection cables from truck to semi-trailer
----Lowbed platform:
* Second kingpin position
* Fifth wheel platform with 45° bevelled front corners and front toolbox made of galvanised, powder-coated steel sheet, W = 2,480 mm x H = 500 mm x L = 665 mm with folding lid
* Side aluminium drop sides, 400 mm high (in RAL custom colour), foldable and removable
* Rear wall -150 mm- high plug-in
* Rear slope on the saddle platform to the lowbed approx. 700 mm long with chequer plate covering and a perforated strip at the end for attaching aluminium loading ramps
* Fifth wheel platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks
* Tread plate over the axles
* 9 x mechanical folding wideners to 3 m overall width, not in rear slope (widening planks available with sealed crosswise storage compartment under the loading area)
* 3 mounting shafts under the saddle platform for the storage of either aluminium loading ramps or wooden planks for wheel well covering
----Load securing (LaSi-package):
Fifth wheel platform:
* Perforated outer frame, 45° angled, with hole pattern for lashings (2 t lashing capacity per tie-down point at a minimum spacing of 480 mm)
* 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the cranking, 1 x above the central axle next to the longitudinal member)
Lowbed platform:
* 3 x 13.4 t lashing rings per side on the outer frame (1 x at the start of the cranked platform, 1 x at the start of the access slope, 1 x at the end of the access slope)
* 2 x 10 t lashing rings per side (1 x between the front wheel well and 1st axle, 1 x between the 2nd and 3rd axle)
* 3 x 5 t lashing rings per side bolted to the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear wheel well)
----Excavator arm rest:
* Extended excavator arm rest from end of last rigid axle over steering axle to end crossmember, continuous with internal reinforcing profile approx. W = 770 mm x D rear = 270 mm / D front = 170 mm
* 2 x 6.4 t lashing rings per side in the exca
Mali oglas
Neuss
830 km
Drugo
OtherHunde Transport Anhänger TomDog 3 mit Lüfter isoliert 100kmh verfügbar
Pokliči
Stanje: novo, lastna masa: 300 kg, skupna masa: 750 kg, Za kupovinu ove prikolice za transport pasa, molimo Vas da pripremite broj oglasa i zakažete termin putem telefona 02131 595 4218!
Termini za kupovinu / preuzimanje dostupni su po telefonskom dogovoru ili tokom rasprodaje iz magacina.
Jednostavna i pouzdana realizacija zagarantovana!
Primer bez obaveze: 3 boksa i prostor za odlaganje
Unutrašnje dimenzije: 2x1x1 cm,
Šasija 750 kg V, gumeno vešanje, bez kočnica, pogodno za brzinu do 100 km/h,
30 mm izolacioni zidovi od sendvič panela, glatki beli, zadnja vrata sa bravom,
Bočni ventilatori, aerodinamični prednji i krovni deo od poliestera, beli krov sa električnim krovnim ventilatorom od 12 V preko DP,
Plywood pod 15 mm, podupirači, oslonac za prikolicu, ukrasni poklopci točkova...
Cena po lageru u Neussu, sve uključeno:
Iaedoy Rrlajpfx Aicou
Nadogradnja otporna na prskanje vode.
COC dokumentacija, TÜV Rheinland ili partnerski izveštaj, sve uključeno.
lager 20-26 la5
Mali oglas
Egestorf
860 km
Tristrani nagibni priklopnik
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4:
----Brakes:
* Wabco ABS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm) with 40 mm flange towing eye
----Electrics / Lighting:
Iaodpfx Aijl Th Htocou
* 15-pin power connector
* Multi-chamber tail lights
----General Attachments:
* Jost mechanical landing gear at front
* 2 mechanical folding supports at rear
* Plastic toolbox, approx. 650 x 350 x 320 mm, mounted on the right side of the chassis at the front
* Bolted underrun protection
* Plastic quarter mudguards
* Net hooks positioned at the central locking locations and 2 on the front wall
----Chassis:
* High-tensile steel chassis
----Tipping Platform:
* Steel pallet-type three-way tipper body with continuous side walls, upper inside pipe reinforcement, no central stanchions; drop-down with drop side spring assistance
* Bolt-on rear stanchions
* Combination steel swing doors on the rear wall, 2-leaf, asymmetrically split, can swing and lock 270°, not drop-down, with additional pendulum frame for automatic rear wall opening during tipping; locking via galvanized rotary bolt at the rear and central locking; deactivation for auto rear wall function when tipping backwards with door open
* 4 mm fine-grained steel floor plate
* Rear mounting rails for loading ramps
----Load Securing:
* 1 x 5 t lashing point in each corner, plus 4 x 3 t lashing rings on each side recessed into the external frame
----Ramps:
* 1 pair of aluminium drive-on ramps, approx. 3,570 x 410 mm (load capacity: 10 t/pair), suitable for rubber-tired & tracked vehicles
* Lockable storage compartment under the loading platform, integrated into the chassis for the ramps
----Tyres:
* Tyres 285/70 R19.5
----Painting:
* Chassis, drawbar, underrun protection, rear stanchions and rear folding supports hot-dip galvanized
* Axles, springs, air tanks and support winch painted black
* Drop sides painted RAL 9010 pure white
* Other RAL-coloured side wall painting available at extra cost
----Information:
* Reinforced body with load securing certificate
* Vehicle has a day registration (not previously in use)
* Subject to errors and prior sale
----Delivery time:
* Available immediately ex Egestorf
Mali oglas
Egestorf
860 km
Prikolica z nizko platformo
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Pokliči
Stanje: rabljeno, največja dovoljena obremenitev: 10.870 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 06/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2023, Oprema: ABS, KA-TA-R 14.4:
----Brakes:
Iedpfx Aiel Th Dujcjau
* Wabco ABS
* Emergency release device for spring-loaded cylinders
* Drum brakes
----Axles:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer set
----Drawbar / Flange eye:
* Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange eye
----Electrics / Lighting:
* 15-pin power connector
* Multi-chamber tail lights
----General attachments:
* Jost mechanical landing gear in front
* Two mechanical folding supports at the rear
* Plastic toolbox approx. 650 x 350 x 320 mm mounted on the right side at the front of the chassis
* Bolt-on underrun protection
* Plastic quarter mudguards
* Net hooks located at the central locking mounting points as well as 2 hooks on the front wall
----Chassis:
* Chassis fabricated from fine-grain steel
----Tipper body:
* Steel pallet three-way tipper body with continuous side walls, upper sections internally reinforced with pipe, no central stanchions, drop-side design with tailgate spring lifters
* Rear stanchions bolted
* Combination steel wing doors at the rear, double-leaf, asymmetrically divided, can swing open and lock to 270°, not collapsible, fitted with additional pendulum frame for automatic tailgate opening during tipping operation; locking by galvanized rotary bar at the rear and central locking; deactivation for automatic tailgate function when tipping backward with open wing doors
* 4 mm fine-grain steel floor plate
* Rear mounting rails for loading ramps
----Load securing:
* Each corner fitted with one 5 t lashing ring, each side fitted with four 3 t recessed lashing rings in the outer frame
----Ramps:
* One pair of aluminum access ramps approx. 3,570 x 410 mm (load capacity 10 t/pair) suitable for rubber-tired & tracked vehicles
* Rear lockable storage compartment for ramps integrated underneath the load area in the chassis
----Tyres:
* Tyres 285/70 19.5
----Paintwork:
* Chassis, drawbar, underrun protection, rear stanchion, and rear support legs hot-dip galvanized
* Axles, springs, air reservoirs, and landing gear painted in a shade of black
* Side wall paintwork in RAL 9010 pure white
* Other RAL color tones for side walls available at extra cost
----Additional Information:
* Reinforced body with load securing certificate
* Vehicle comes with one-day registration (never used)
* Subject to errors and prior sale
----Delivery time:
Immediately available ex Egestorf
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Pokliči
Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis:
- Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm
Ijdpfx Aexnnk Dsicoau
- Neck height 200 mm with chamfered front corners
- Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer)
- 2 kingpin positions with replaceable 2” kingpin
- Outer frame closed to the outside as perforated outer frame
- Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
- Frame before and after extension with 80x80 mm step
- Reinforced frame design / point load focused in the retracted state
- Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame)
- With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle
- 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm
- Underrun protection = extended end plate
- Drop support legs at the rear
Axles, Steering and Tyres:
- BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjuster
- Lifting and lowering device with total lift approx. 200 mm
- 2nd driving position via ball valve +50mm
- 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical lock
- 12 steel disc wheels, 10-hole, centered by offset
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Including tyre pressure monitoring
Accessories:
- Plug-in side and rear boards on swan neck, approx. 400 mm high
- Spare wheel holder
- Side aluminium underrun protection
- 4 wheel chocks with holder
- Elongated number plate holder in end plate
- 1 removable ECE sign at the rear
- 11 pairs ZK modules 10t, on the side:
- 2x on the swan neck
- 2x on the loading platform in front of the extension
- 7x after the extension
- Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm
- 4 plug-in holders for warning signs in stake pockets on loading platform
- 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm
- 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions)
- 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle)
- 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container
- Rubber apron mounted on underrun protection
Optional: The trailer is available with ramps.
Mali oglas
Dortmund
815 km
Nizki nakladalnik
FaymonvilleMAX Trailer 3-Achs-Tiefbett mit Pendelachsen
Pokliči
Stanje: novo, lastna masa: 17.500 kg, največja dovoljena obremenitev: 43.500 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.550 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 400 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck:
- Gooseneck in SNT design for optimized loading platform length, approx. 3,750 mm long
- Gooseneck hydraulically liftable/lowerable and detachable
- For tractor units: 6x4 or 8x4
Lowbed:
- Lowbed with external beams, extendable version, "SUPER LOW" design, approx. 7,550 mm long
- Lowbed with fixed hardwood floor approx. 40 mm thick and mechanical locking device
- Service lines are protected within the extendable beams and automatically adjust to the lowbed length
Rear Undercarriage:
- Rear chassis with closed outer frame, checker plate cover, and continuous prism-shaped excavator trough approx. 1,450/900 x 505 mm, open at the rear
- 2 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame
Axles and Tires:
- "PENDULUM AXLE", all axles hydro-mechanically forced-steered
- Hose rupture valve on axle compensation cylinder with automatic RESET function
- Hydraulic cylinders with shut-off valves and locking pins for securing in raised position
- Technical axle load: 12,000 kg
- Hydraulic axle compensation
- Tyres 245/70 R 17.5 / 3PMSF
Included Accessories:
- Prepared for bolt-on container positioning for 1x 20ft or 1x 40ft container on the outer beams
- 2" kingpin
- Galvanized steel front wall approx. 400 mm high
- One spare wheel with holder
- At the galvanized front adapter bar yellow-red air couplings
- 4 wheel chocks
- Remote rear steering from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles
- Hydraulic line connections from gooseneck to lowbed with multi-coupling instead of screw coupling
- Electro-hydraulic power pack
- White reflective tape to EU specifications on sides, extension, and rear red
- 2 wooden blocks 500x250x200 mm
- European reflective plates (red-yellow) on the trailer rear
- At the gooseneck and rear wall left and right each a bracket for warning boards including socket
- Central lubrication system with 2 BEKAMAX (Pico) pumps using standard grease NLGI-2
- Load gauge for determination of axle loads including load diagram
- On the gooseneck, plug-in ALU side and rear boards approx. 2,000 x 400 mm
- The rear galvanized insert posts are removable (body length approx. 2,120 mm)
- Separate air connection for air gun on the gooseneck
- Duomatic air coupling from gooseneck to lowbed
- Rear upper section of gooseneck closed with removable cover
- 1 pair of steel ramps to bridge the lowbed's pick-up hooks
- Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm
- Wireless remote control for rear steering in addition to cable remote, with signal lights at receiver for single-track monitoring
- 6 pairs of threaded blocks between lashing rings under the top chord on the outer beams for mounting screwable RUD rings VLBG-4
- 7 pairs of stake pockets for 100 x 50 mm insertable stakes in the outer frame of the loading bed
- Foldable extensions, approx. 230 mm per side
- Loading area features a painted sand layer for anti-slip protection
- Dipper stick trough of rear chassis closed at front and rear with plug-in plates
Isdpfx Aoh Hm Theicjau
- HRM metallization (High Resistance Metallisation) of the outer frame
- Complete steel structure shot-blasted, then defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - alu 15%)
Mali oglas
Dortmund
815 km
Polpriklopnik z nizkim nakladalnikom
Meusburger3-Achs-Semi mit 2 Paar Radmulden
Pokliči
Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis:
- Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm
- Gooseneck height 200 mm with beveled corners
- Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel)
- 2 kingpin positions with interchangeable 2" kingpin
- Outer frame closed outwards as slotted rail for lashing with tie-down straps
- Reinforced frame design / point load at center of gravity
- Provisions for extendable deck wideners
- With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle
- 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers
- Underride protection = extended end plate
- Hydraulic drop-down supports at rear
Floor:
- 35 mm larch timber floor with aluminum omega profiles
Axles, Steering, and Tyres:
- BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm
- S-cam brake 300/200 mm, asbestos-free brake linings
- Automatic slack adjusters
- Lifting and lowering device, total lift approx. 200 mm
- 2nd driving height via ball valve +50mm
- 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer
- 3rd axle as friction-steered trailing axle with electric and mechanical locking
- 12 steel disc wheels, 10-hole, hub-centered
- 12 tyres 245/70 R 17.5 143/141J, tubeless
- Incl. tyre pressure monitoring system
Iedpfswu A Slex Aicjau
Braking System:
- Dual-line brake system with EBS-E including RSS
- EBS (WABCO 4S3M)
- Spring-loaded parking brake
- Pneumatic connection yellow/red
Paintwork:
- Steel shot blasting, spray galvanising of chassis and primer
- Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau
Accessories:
- Removable side and rear boards on the gooseneck, approx. 400 mm high
- Spare wheel holder
- Side aluminum underrun protection
- 4 wheel chocks
- Steel fenders with Clear-Pass
- Long license plate holder in end plate
- 1 removable ECE plate at the rear
- 11 pairs ZK modules 10t lateral:
- 2x on the gooseneck
- 9x on the loading platform
- Without rear towing eyes
- Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width
- 4 insertable sockets for warning signs in stake pockets on loading platform
- 6 pairs stake pockets along sides for 100x50 mm stakes
- 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions)
- 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle)
- 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container
- Rubber skirt mounted on underrun protection
- Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps
- Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft
Optional: Trailer available with aluminum folding ramps.
Mali oglas
Neuss
830 km
Drugo
OtherHunde Transport Anhänger TomDog 3 mit Lüfter isoliert 100kmh verfügbar
Pokliči
Stanje: novo, lastna masa: 300 kg, skupna masa: 750 kg, Za kupovinu ove prikolice za transport pasa, molimo Vas da pripremite broj oglasa i zakažete termin na telefon 02131 595 4218!
Termini za kupovinu / preuzimanje mogući su nakon telefonskog dogovora ili tokom lager prodaje.
Jednostavna i pouzdana obrada garantovana!
Primer, neobavezno: 3 boksa i prostor za odlaganje
Unutrašnji prostor: 2x1x1 cm,
750 kg V šasija, gumeno vešanje, bez kočnica, pogodna za 100 km/h, sendvič zidovi 30 mm izolovani, beli, glatki sa zadnjim vratima na zaključavanje,
Bočni ventilator, aerodinamički deo od poliestera napred i krov, beli, krovni ventilator na elektro pogon 12 V preko DP, pod od šperploče 15 mm, kurblene potpore, potporni točak, ukrasne ratkape...
Iajdpfey Eilmjx Aicou
Cena iz lagera Neuss, sve uključeno:
Nadogradnja prskasno zaštićena.
COC dokumentacija, sertifikat TÜV Rheinland ili partner, sve uključeno.
lager 17-26 lan5
Mali oglas
Neuss
830 km
Drugo
OtherHunde Transport Anhänger TomDog 3 mit Lüfter isoliert 100kmh verfügbar
Pokliči
Stanje: novo, lastna masa: 300 kg, skupna masa: 750 kg, Za kupovinu ovog prikolice za transport pasa molimo vas da pripremite broj oglasa i dogovorite termin pozivom na broj 02131 595 4218!
Termini za kupovinu/preuzimanje su mogući nakon telefonskog dogovora ili direktno u skladištu.
Jednostavna i pouzdana realizacija je zagarantovana!
Primer bez obaveze: 3 boksa i prostor za odlaganje
2x1x1 cm unutrašnji prostor,
750 kg V šasija, gumeno vešanje, bez kočnica, pogodno za brzine do 100 km/h, sendvič paneli 30mm, izolovani, glatki, beli, sa zadnjim vratima na zaključavanje, bočni ventilatori, aerodinamični poliester deo kao prednji i krovni deo, beli, krovni električni ventilator 12V preko DP, pod od šperploče 15mm, ručne potpore, pomoćni točak, poklopci točkova...
Cena iz skladišta Neuss, all-inclusive ponuda:
Nadogradnja otporna na prskanje vode.
Iasdpoyxatujfx Aicsu
COC dokumentacija, TÜV Rheinland ili partnerski atest sve uključeno.
skladište 13-26 la5
Znak zaupanja
Prodajalci, certificirani pri TruckScout24

Mali oglas
Dortmund
815 km
Polpriklopnik z nizko nakladalno ploščadjo
Meusburger3-Achs-Tele-Semi mit 1 Paar Radmulden
Pokliči
Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report.
Chassis:
-Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm
-Frame neck 200 mm with beveled front corners
-Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area)
-2 king pin positions with replaceable 2” king pin
-Outer frame closed to the outside as hole profile outer frame
-Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm
-Frame before and after extension with 80x80 mm step
-Reinforced frame design / point load support in retracted position at center of gravity
-Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame)
-With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle
-1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm
-Underrun protection = extended rear plate
-Drop support legs at rear
Floor:
-35 mm larch wood floor with aluminum omega profiles
Axles, Steering and Tires:
-BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm
-S-cam brakes 300/200 mm, asbestos-free brake pads
-Automatic slack adjuster
-Lift-and-lower system with total lift approx. 200 mm
-2nd ride height via ball valve +50mm
-1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer
-3rd axle is a friction-steered trailing axle with electric and mechanical lock
-12 steel disc wheels, 10-hole, centrally offset
-12 tires 245/70 R 17.5 143/141J, tubeless
-Including tire pressure monitoring
Accessories:
-Removable drop sides and rear wall on the gooseneck, approx. 400 mm high
-Spare wheel holder
-Lateral aluminum side underrun protection
-4 wheel chocks with bracket
-Elongated license plate holder in the rear plate
-1 plug-in ECE sign at rear
-11 pairs of 10t lashing modules at the sides:
2x on gooseneck
2x on cargo bed in front of the extension
7x after extension
-Without rear towing eyes
-Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm
-4 holders for warning boards, insertable in stake pockets on the cargo bed
-6 pairs of side stake pockets for plug-in stakes 100x50 mm
-2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions)
-3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle)
-2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container
-Rubber apron mounted on underrun protection
-Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps
Iasdeywv Ixepfx Aicou
Optional: the trailer is available with aluminum loading ramps
Mali oglas
Seesen
729 km
Kombi s prekucnikom
OPELMovano DoKa 3-Seiten-Kipper SOFORT VERFÜGBAR
Pokliči
Stanje: novo, prevoženi kilometri: 10 km, moč: 103 kW (140,04 KM), vrsta goriva: dizel, skupna masa: 3.500 kg, barva: bela, vrsta prenosa: mehanski, število sedežev: 7, dolžina tovornega prostora: 3.050 mm, širina tovornega prostora: 2.010 mm, višina nakladalnega prostora: 98 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, German new vehicle:
* Unregistered
* Euro 6
* 6-speed gearbox
* 7 seats
* 90 L fuel tank
* Gross vehicle weight: 3,500 kg
* ABS + ESP
* Driver airbag
* Mirrors for body width 2350 mm
* Reinforced rear axle suspension
* Multifunction system with DAB radio and steering wheel controls
* Central locking with remote control
* Electric windows
* Electrically adjustable/heated exterior mirrors
* Tow bar with 3,000 kg towing capacity
Three-way tipper:
* Subframe: Steel, hot-dip galvanized
* Drive: electro-hydraulic with cable remote control
* Floor: galvanized steel sheet
* Aluminum drop sides, 40 cm high, foldable
* Mesh extension, 58 cm high, swinging
* Internal dimensions approx. LxWxH 305x201x98 cm
Load securing equipment also available:
* Lashing and tension belts
* Cargo bars
* Safety vests
* Transport boxes
* Edge protectors
* Dunnage bags
* Wheel chocks
* etc.
Financing and leasing options available
We manufacture superstructures in every size and for any chassis.
Tarpaulin, GRP sandwich, aluminium light alloy
Isdpfxefq I A So Aicoau
Visit us at:
Superstructures – Complete vehicles – Trailers – Advice – Financing
Subject to errors and prior sale, no liability for misprints or input errors.
Mali oglas
Neuss
829 km
Samooskrba 3 strani
Hapert3 Seitenkipper 405x200x100, 3500kg, NEU Sofort Verfügbar
Pokliči
Stanje: novo, lastna masa: 1.170 kg, največja dovoljena obremenitev: 2.230 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.051 mm, širina tovornega prostora: 1.964 mm, višina nakladalnega prostora: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 195/50 r13, Hapert 3-Way Tipper Cobalt HM2
Permissible Total Weight: 3,500 kg
Dimensions: 405 x 200 cm
Black Special Edition
*IMMEDIATELY AVAILABLE*
Equipped with loading ramp package, screw jacks, parabolic suspension, shock absorbers, 100 km/h road approval and certificate
70 cm drop sides, swinging design
This three-way tipper can be used daily for transporting bulk materials, but it is also perfectly suited for your excavators and other machinery thanks to its robust build.
Since the Cobalt HM tips to all three sides, it is ideal for use in spaces with limited room.
The Cobalt HM features a steel floor, electric pump with battery, and hand pump, allowing you to unload your cargo quickly and efficiently. Because time is money!
TÜV-certified load securing system
Specially designed side hinge system for easy attachment of load covers
4 removable corner posts
Aluminium side walls, 30 cm high, with integrated heavy-duty locks
Iasdpjqwlc Iefx Aicju
If you have any questions, send us a message or call us!
Technical modifications, price changes, errors, and prior sale reserved. No liability is accepted for errors or misprints.
Mali oglas
Leipzig
607 km
Prodajna prikolica
IMBISSANHÄNGER SOFORT VERFÜGBARAktionspreis Netto:17.653€
Pokliči
Stanje: novo, Financing available.
Make your dream of owning a food truck business come true! Contact us today for a no-obligation consultation. We are proud to offer snack trailers of the highest quality and are ready to meet your individual requirements.
Snack Trailer Features:
- 4 cm metal sheet walls with insulation
- Exterior color: black
- Roof color: white
- Braked KNOTT axle
- Overrun brake with reverse automatic and parking brake
- V-shaped galvanized drawbar
- Internal dimensions approx.: 3920 x 2220 x 2170 mm
- External dimensions approx.: 5327 x 2300 x 2820 mm
- 1 x serving window on the right in the direction of travel
- Permissible total weight: 1,500 kg
- Single axle
- Tires: 13"
- 1 x lockable entrance door
- Non-slip PVC flooring
Interior Fitting & Electrical System:
- 1 x overhead cupboard above the sink
- Black furniture (complete)
- 6 mm tempered safety glass / splash guard
- Counter shelf, cash drawer
Water Supply:
- 2 x single sinks with 2 x 20 L tanks
- 1 x water tap with boiler
Hygiene Package:
- 2 x soap dispensers
- 1 x paper dispenser
Isdpfsy Uwbbsx Aicsau
Electrical System:
- External inlet socket 380 V / 32 A
- 1 x distribution box (220 V - 380 V) with RCD
- 4 x double sockets - 220 V
- 2 rows of spotlights (1 row on the right by the serving hatch, 1 row in the center of the snack trailer)
Stainless Steel Side Wall:
- Stainless steel smooth side wall under the hood
Wall Hood – 1000 mm – with motor, controller, filter & lamp
Double Electric Griddle – 73 cm – Royal Catering – smooth plate – 2 x 2200 W
Double Electric Deep Fryer – 2 x 16 L – 6400 W – drain tap – Royal Catering
Electric Bain-Marie – 1.2 kW – for GN 1/1 with 150 mm height – with drain tap
Olajšamo vam iskanje: "autotransporter sofort verfügbar mit 3 achs fahrzeugtransporter"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.






















































































































































































































































































































































































































