Odprta polprikolica s ponjavo

WEB-TRAILER 3-Achs Schiebeplane mit XL-Zertifikat (opt. LBW)

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.850 mm, skupna širina: 2.480 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, WEB Trailer PRASQ18 SYS 7.5 Trailer with Body, Twin 17.5" wheels including multilayer plywood floor Dimensions: Length as per customer specification in 100mm increments (optionally in 50mm increments) Curtainsider body side height 2,850 mm from loading platform to lower edge of outer sill (other heights available on request) Width: 2,480 mm or 2,540 mm Coupling height according to customer specification Driving height / loading height unladen approx. 1,030 mm (top edge of floor) Spring center approx. 1,100 mm Axle loads: 18,000 kg (2 x 9,000 kg) Approval: COC (Certificate of Conformity) papers Chassis: Chassis construction made from welded longitudinal beams and through-inserted cross members Cross member spacing IPE 80 approx. 400–500 mm Outer frame height approx. 125 mm (t=4), with groove and 7 pairs of lashing eyes (5t) Turntable with 90mm-high ball race (low-maintenance) Drawbar: 18t rigid drawbar, one-sided height adjustment Drawbar eye Ø 40 mm (50mm eye optional) Axles: Brand-name (SAF/BPW/JOST) Lhedpfx Asg Dkxwob Ujr 9t 17.5" drum brakes Brakes: EBS brake system by Knorr or Wabco Air connections: coupling heads (red and yellow) Lifting and lowering device with two rotary slide valves (Knorr/Wabco) Tire pressure monitoring Tyres: Branded 235/75 R 17.5 tires on steel rims Body: Body certificate in accordance with DIN EN 12642 XL Contour marking, ECE plates, rear doors with steel sandwich panels and four internal vertical locking bars, sliding roof, 90° front wall, steel cassettes, internal wear plates over full height 3 rows of wooden slats Sliding curtain PVC 12x12, 880g, Reinforced roof tarpaulin, 12x12 roof weave Tension ratchets at front and rear Lighting system: 24 Volt with LED 15-pin plug Flashing side marker lights Floor: 27 mm transverse phenolic plywood floor Certified forklift axle load 7.2t according to DIN EN 283 (9t optional) Attached parts: Access ladder with platform at rear right Plastic mudguards, 180 degrees Spray suppression mud flaps One wheel chock with holder 2 rubber bumpers at rear corners Side underride protection, aluminium or plastic profile on both sides Coating: Chassis painted in RAL 9005 or Novagrau 7350 Other colours available at extra charge (subject to powder colour availability) KTL with zinc phosphating plus powder coating, maximum corrosion protection Hot-dip galvanization (optional) Ex works price Note!!! Images show special equipment Get expert advice and receive a free, no-obligation quotation. Leasing, financing, or hire purchase available! We can adapt to your requirements! Contact us – we are happy to provide you with an offer. Subject to errors and prior sale!!!

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 11.000 h, Please quote reference number: 17924 Specifications: - Year: 2014 - Hours: Approx. 11,000 - Operating weight: 25,500 kg - Engine output: 141 kW - Chassis (see photos) - Gjerstad S70 attachment - Engcon tiltrotator - SMP ditching bucket Lhedpfxstr T Npj Ab Usr - Central lubrication - Track width: approx. 60 cm - Machine width: approx. 320 cm - Cracks in windscreen (see photos) - Reversing camera - Additional lighting - Rotating beacon - Radio/CD - Air conditioning - Previously under a service contract Description: Komatsu PC240, year 2014, sold with Engcon tiltrotator and SMP grading bucket. The machine has been covered by a maintenance contract and has been serviced regularly throughout its lifetime. The turbocharger was recently replaced. GPS device is not included. Last service was carried out at 10,500 hours. Delivery can be arranged promptly. Operating hours: 11,000 Operating weight: 25,500 kg Total weight: 25,500 kg Width: 320 cm Power: 141 kW Model: PC240LC-10 = More information = Serial number: KMTPC240J55K6xxxx Please contact ATS Norway for further details.

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.870 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, WEB ? Trailer TFSSQ-27 12t Plywood Dry Freight, 3-Axle Semi-Trailer, 19.5" Dimensions: Ride height unladen approx. 1080 mm (loading height) with king pin height approx. 960 mm Chassis length approx. 13,620 mm (internal loading length) Internal width approx. 2,480 mm (loading width) Total width approx. 2,550 mm Internal height approx. 2,870 mm King pin load max. approx. 12,000 kg Axle load: 24,000 kg Approval: CoC documents Chassis: Chassis made from welded longitudinal beams and full-width crossmembers External frame height approx. 80 mm without lashing rings in the floor (optionally available) Landing gear: 24 t telescopic support gear, branded (Jost/SAF) Axles: Branded axles (SAF/BPW/JOST) 9t 19.5" disc brakes, single tyres without axle lift (option) Axle spacing approx. 1,310/1,310 mm Air suspension unit, 9 t each, total stroke approx. 180 mm Brakes: EBS brake system, brand Knorr or Wabco Air connectors with red and yellow couplings Raise/lower device with 1 rotary slide valve Knorr/Wabco 2x air tanks, approx. 80 l each, steel Tyre pressure monitoring Tyres: Branded tyres 445/45 R 19.5 on steel rims Body: Body in plywood version (option: ISO walls) Body certification DIN EN 12642 XL Front wall steel with 400 mm steel cassettes, internal wear plate full height Iso roof min. 30 mm (incl. LED light strips running lengthwise left and right) Side walls with combi anchor rails running lengthwise, on both sides (number and position as per customer requirements) Side walls approx. 20 mm plywood (optional: ISO walls) Side walls with reinforced base rubbing strip approx. 4 mm galvanised, edged steel section, approx. 400 mm high, bonded and screwed to the walls. Rear portals with 4 internal swing bolt door locks, door leaves made from steel sandwich panels Lighting: LED lighting system 15-pin connection at front flashing side marker lights Lodpfx Aji Eug Seb Uehr Floor: 27 mm transverse phenolic plywood floor Certificate for certified forklift axle load 9.0 t in accordance with DIN EN 283 Fitted parts: Foldable and extendable access ladder at the rear right with platform Two wheel chocks with holder, plastic or galvanised 2 rubber impact buffers at rear corners Plastic mudguards (180°) Side underrun protection on both sides, aluminium or plastic profile Coating: Chassis painted in RAL 9005 or Nova Grey 7350, other colours at extra cost (only available in powder if colour is available) KTL with zinc phosphating plus powder, maximum corrosion protection Hot-dip galvanising (optional) Ex works price Note!!! Photos show optional equipment Get expert advice and a free, non-binding quote. Leasing, financing, or hire purchase available! We can accommodate your requirements! Contact us – we are happy to prepare an offer for you. Errors and prior sale excepted!!!

Stanje: novo, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.930 mm, skupna širina: 2.480 mm, skupna višina: 4.000 mm, Leto izdelave: 2025, Oprema: ABS, WEB – Trailer ZPRASQ SYS 18 M Tube 19.5" Single Central Axle Chassis with Body for 27 mm Laminated Hardwood Floor Curtainsider body, side height 2,850 mm from loading surface to lower edge of outer beam Driving height unladen approx. 1,010 mm Axle loads: 18,000 kg (2 x 9,000 kg) Coupling height approx. 400 mm unladen (other heights optional) Chassis length approx. 6,000 – 8,000 mm (other lengths optional) Support load approx. 1,000 kg COC documents Outer frame height approx. 125 mm, with groove for lashing rings Chassis made from welded longitudinal beams and through inserted crossbeams 7 pairs of lashing rings 1 set of landing legs at front 1 set of drop legs at rear Fixed drawbar with bolted towing eye Towing eye Ø 50 mm Axles by leading manufacturers (SAF/BPW/JOST) Axle 9t 19.5" small disc brake Without axle lift (optional) EBS brake system by Knorr or Wabco Air connections with Duomatic coupling Coiled flex cable Lhodpfxsg Dkzrs Ab Ujr Raise/lower valve with 1 rotary slide valve Knorr/Wabco 15-pin connector Premium tyres 445/45 R 19.5 Tyre pressure monitoring Body certificate according to DIN EN 12642 XL Conspicuity markings, ECE signs Sliding roof with automatic locking, opens from the rear (optionally from the front) Tail door with 4 internal locking rods made of steel sandwich panels 1 pair of lateral sliding curtains Front wall 90°, steel 400 mm steel cassettes, internal wear plate 3 rows of wooden slats (optional aluminium) Sliding curtain PVC 12x12, 880g Reinforced roof tarpaulin with 12x12 roof fabric Tension ratchet at rear and front LED lighting system 15-pin front connection Flashing SML Birch plywood floor, 27 mm transverse laid Floor: certificate for certified forklift axle load 7.2t according to DIN EN 283 Continuous rear lamp bracket Bolted underrun bar (rectangular tube) Folding and extendable access ladder at rear right with platform Two wheel chocks with holders, plastic or galvanised 2 rubber dock bumpers at rear corners Plastic mudguards, 180 degrees Anti-spray mudflaps Side underrun protection both sides, aluminium or plastic profile Chassis painted in RAL 9005 or Novagrau 7350; other colours available at extra charge (subject to powder colour availability) KTL with zinc phosphating plus powder coating, maximum corrosion protection Hot-dip galvanising (optional) Ex works pricing Important: Photos show optional extras Get in touch for advice and a free, no-obligation quote. Leasing, financing, or hire purchase options possible! We cater to your requirements. Contact us for a tailored offer. Errors and prior sale excepted.

Leto izdelave: 2019, Stanje: rabljeno, Please quote reference number upon request: 19694 Description: 2019 Vama EHK2200 wheel loader sweeper for sale. Everything works as it should, according to the owner. The brush is also in good condition. Lodpfsvxd Rlsx Ab Uehr There are two water tanks with nozzles to reduce dust formation while sweeping. Available immediately. = Further information = Serial number: 1xxxx Please contact ATS Norway for more information.