Faymonville Standardna Struktura nakup rabljenega (220)

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2018, Faymonville F-S42-2GXX. Baujahr: 2018. 12 t Pendel-X-Achsen. Max. Gesamtgewicht: 49.000 kg. Sattelzapfenlast: 25.000 kg. 5,5 Meter ausziehbar. 2 x 25 cm verbreitert inkl. Verbreiterung. Verzinkt. Hydraulisch abfahrbares Schwanenhals. Alu-Bordwände am Schwanenhals. Hydraulische Federung. Funk-Fernbedienung. Baggerbrücke: 3050 mm x 700 mm. 3 herausnehmbare Bodenplatten. Hydraulik arbeitet vom Auflieger über NATO-Elektrik. Abmessungen: Schwanenhals: L: 3.700 mm B: 2.500 mm H: 1.500 mm Sattelhöhe: 1.250 mm Ladefläche: L: 6.850 mm B: 2.550 mm H: 400 mm Bodenstärke: 230 mm Heck des Aufliegers: L: 3.050 mm B: 2.550 mm H: 950 mm Bereifung: 245/70R17,5 60% ID-Nr.: 494. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis, sämtliche von Heinhuis abgeschlossenen Verträge und die den Vertragsabschlüssen vorangegangenen Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, von diesen Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2018 Max. Gesamtgewicht: 49.000 kg Ausziehbarer Aufbau: Ja Fsdpfextph Ujx Af Ueft = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: dober (rabljeno), konfiguracija osi: 2 osi, prva registracija: 12/2002, dolžina tovornega prostora: 156.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 250 mm, skupna dolžina: 156.800 mm, skupna širina: 2.540 mm, skupna višina: 250 mm, vzmetenje: zrak, Leto izdelave: 2002, Oprema: ABS, dvižna zadnja plošča, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Vzmetenje: zračno vzmetenje Zadnja os 1: dvojna montaža; vodena Fsdpfjuyud Nex Af Ujft Zadnja os 2: dvojna montaža; vodena Teže Lastna teža: 11.040 kg Nosilnost: 22.000 kg Skupna dovoljena masa: 33.040 kg Stanje Tehnično stanje: dobro Optično stanje: dobro Finančne informacije Cena: po dogovoru Dodatne informacije Za več informacij se obrnite na David F Middelman ali David F Middelman.

Stanje: rabljeno, številka stroja/vozila: ***YAMT13XX6K0104043, konfiguracija osi: 3 osi, prva registracija: 01/2019, skupna dolžina: 13.800 mm, skupna širina: 2.550 mm, skupna višina: 3.410 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 2019, Oprema: ABS, Chassis Chassis height: 87 cm King pin diameter / fifth wheel: 2 inch King pin / drawbar height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Loading platform length: 930 cm Ramp length: 395 cm Gooseneck length: 415 cm Low loader: ✓ Maximum width: 300 cm (25 cm per side) Fjdpeu H D R Ejfx Af Uoft Max. length: 1,380 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle Configuration Tyre size: 235/75 R17.5 Axle manufacturer: SAF Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; Tyre tread left outer: 60%; Tyre tread right outer: 60% Axle 2: Twin tyres; Tyre tread left outer: 20%; Tyre tread right outer: 30% Axle 3: Twin tyres; Steering; Tyre tread left outer: 55%; Tyre tread right outer: 50% Weights Unladen weight: 10,040 kg Payload: 30,960 kg Gross vehicle weight: 41,000 kg Functional Body brand: Faymonville Loading floor height: 87 cm Identification Registration number: C505325 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: rabljeno, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, prva registracija: 01/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5 3PMSF, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.300 kg, Oprema: ABS, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Loading platform: - Hydraulically lift- and lowerable platform after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) Fjdpsxnarmsfx Af Ueft - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 1 pair of fold-in lashing rings inside at the front of the central beam (LC 10,000 daN) - Cut-outs in the external frame to hang tensioning straps (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part steel ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramp sections fold and unfold hydraulically, with hydraulic lift and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, suspension, and tires: - BPW axles and suspension, 2 fixed axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tools - Tires: 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system according to ECE R 141 Included accessories: - One spare wheel with holder - 2" king pin - One galvanized steel front wall approx. 400 mm high - At the galvanized front connector strip, yellow-red air couplings - 4 wheel chocks with holder - Galvanized folding supports under the rear chamfer of the platform - One bracket for a beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and loading platform - Electro-hydraulic power unit at the rear, under the platform - At the gooseneck and at both left and right of the ramps, holders for warning signs including socket - On the gooseneck, plug-in aluminium side boards and rear board approx. 2,440 x 400 mm - The rear, galvanized insert stanchions are removable (superstructure length approx. 2,560 mm) - An electric cable winch with radio remote control, pulling capacity approx. 5,400 kg, including 9.5 mm thick wire rope, 24 m long with guide roller - Bolted 5t ring for guiding winch cable on the gooseneck without return pulley - 2 pairs of WADER container pockets in the platform for a 20ft container - 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the external platform frame - Lift axle on the front axle with control via TEBS E, depending on current axle load and loading state - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 2 pairs in the liftable bed - 5 pairs in the rear part of the platform - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - On chequer plates on the gooseneck and platform, painted sand coating for anti-slip - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 - Four warning signs extendable by approx. 400 mm, size approx. 423 x 423 mm - Load gauge for axle load determination including load diagram - HRM Metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metallized with ZINACOR 850 (zinc 85% – aluminium 15%) by hot finishing

Stanje: novo, največja dovoljena obremenitev: 38.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specification available on request. Loading Platform: * Extensible loading platform with pneumatically operated locking system * Platform surface with approx. 30 mm thick wooden planks * 7 pairs of foldable lashing rings (LC 5,000 daN) * 3 pairs of foldable lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Leg: * JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Tyres: * Tyres 385/65 R 22.5 Axle: * BPW axles and suspension, all axles force-steered by hydro-mechanical system * Equipped with disc brakes * Technical axle load: 10,000 kg (ET 0) * Air suspension with lift and lower valve Brake System: * WABCO brake system in line with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Paintwork: * High-quality two-component (2K) topcoat, single colour in RAL 3002 Carmine Red Accessories: * Remote steering front and rear via cable remote control with push buttons, including axle tracking control. (no installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holders on the front wall * 2-inch king pin * Galvanised connection panel at the front with yellow-red air couplings * Bracket for a rotating beacon at the rear of the trailer * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outside frame of the loading platform * 1 spare wheel holder under the platform, right-hand side in direction of travel (without spare wheel) * Load pressure gauge for axle load determination including load diagram Including Special Equipment: * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks on the platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; when extended an additional locking point is provided for a 45' container * 4 pairs of crosswise stake pocket strips mounted in the platform, for approx. 100 x 50 mm plug-in stakes * Storage bracket for up to 9 pairs of plug-in stakes bolted to the inside of the front wall * Climbing ladder mounted on both left and right sides in the direction of travel * 1 INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the platform, front left * Additional INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the platform, left side * Platform deck with approx. 30 mm thick wooden floor, framed with omega sections * Lifting axle on the front axle with control via TEBS E Ffjdpfx Afoxl Nf Do Uot * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 * 2 LED reversing lights mounted on the rear plate * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * HRM metalizing (High Resistance Metallisation)

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Fsdpov Rvgcofx Af Ueft Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: rabljeno, barva: modra, Leto izdelave: 2022, Faymonville Maxtrailer F-S42-2GXX. Baujahr: 2022. 12 t Pendel-X Achsen. Eigengewicht: 12.917 kg. Nutzlast: 34.083 kg. Zulässiges Gesamtgewicht: 47.000 kg. Sattellast: 23.000 kg. Hydraulisch abfahrbares Schwanenhals. Aluminium Bordwände + Werkzeugkasten am Schwanenhals. Reserverad. Ffsdpfxoxtn I Hs Af Ujt Hydraulikanschluss am Lkw (NATO). 5,5 m ausziehbar. 2 x 25 cm verbreiterbar. Funkfernbedienung. Hydropneumatische Federung. Baggerbrücke 2600x700 mm. Verzinkt. Abmessungen: Schwanenhals: L: 3700 mm B: 2450 mm H: 1450 mm Sattelhöhe: 1150 mm Ladefläche: L: 6850 mm B: 2550 mm H: 350 mm Bodenstärke: 200 mm Heck Trailer: L: 2600 mm B: 2550 mm H: 1000 mm Bereifung: 245/70R17,5, Profil 90% Zustand: Wie neu! ID-Nr.: 509 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf alle Anzeigen, Angebote und Offerten von Heinhuis, auf sämtliche von Heinhuis geschlossenen Verträge sowie auf den ihnen vorausgehenden Verhandlungen Anwendung. Durch jegliche Form der Reaktion erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen von Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettoexportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 12.917 kg Zuladung: 34.083 kg Zulässiges Gesamtgewicht: 47.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, lastna masa: 14.760 kg, največja dovoljena obremenitev: 21.240 kg, skupna masa: 36.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2007, skupna dolžina: 23.700 mm, vzmetenje: drugo, barva: rdeča, vrsta goriva: bencin, vrsta prenosa: drugo, voznikova kabina: drugo, emisijski razred: noben, - Faymonville STBZ-2VA. - 2x izvlečljiv do 23,70 m - Leto izdelave: 2007 - Lastna teža (prazno vozilo): 14.760 kg Fjdpfsw H S Edex Af Ueft - Dovoljena nosilnost: cca 21.240 kg - Dovoljena skupna masa: 36.000 kg - Tehnično dovoljena skupna masa: 38.000 kg - Pnevmatske gume: velikost pnevmatik: 235/75 R17.5 indeks nosilnosti: 141J - Polpriklopnik v uporabi, lokacija in ogled na zahtevo - Pridržujemo si pravico do napak in vmesne prodaje! ... DDV je mogoče obračunati

Stanje: rabljeno, številka stroja/vozila: YAMT14XX5K0104637, konfiguracija osi: 3 osi, prva registracija: 01/2020, skupna dolžina: 14.100 mm, skupna širina: 2.550 mm, skupna višina: 3.350 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: drugo, Leto izdelave: 2020, Oprema: ABS, Chassis Chassis height: 90 cm Kingpin / Fifth wheel diameter: 2 inch Structure Turntable height: 120 cm Special transport 2-piece road plates: ✓ Hydraulic ramps: ✓ Length over axles: 90 cm Loading platform length: 930 cm Ramp length: 405 cm Gooseneck length: 430 cm Maximum width: 305 cm (20 cm + 20 cm) Maximum length: 930 cm Extendable: ✓ Tank Fuel: ✓ = Further Information = Axle configuration Tyre size: 235/75 R17.5 Axle make: Saf Brakes: Drum brakes Suspension: Air suspension Ffedpfju H D Tasx Af Ujt Axle 1: Twin tires; Lift axle; Tyre tread left outer: 15%; Tyre tread right outer: 80% Axle 2: Twin tires; Tyre tread left outer: 60%; Tyre tread right outer: 50% Axle 3: Twin tires; Steering; Tyre tread left outer: 70%; Tyre tread right outer: 70% Axle 4: Twin tires; Steering; Tyre tread left outer: 75%; Tyre tread right outer: 65% Weights Unladen weight: 11,480 kg Payload: 49,320 kg Gross vehicle weight: 60,800 kg Functionality Body make: Faymonville Platform height: 90 cm Identification Registration number: C525073 = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor Ffsdpel Sl Izefx Af Uet White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...

Stanje: novo, največja dovoljena obremenitev: 37.680 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire range of vehicles, including immediately and short-term available units, on our website. Excerpt from the specification. Full specification available on request. Gooseneck * With approx. 30 mm thick hardwood flooring; gooseneck in straight design at the rear * 3 pairs of lashing rings (LC 5,000 daN) Loading Platform * Extendable version * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading deck for attaching tension belts (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, checker plate covering above the axles Landing Legs * JOST mechanical landing legs with 2-speed gearbox for lifting capacity approx. 24 t (test load approx. 50 t) Tyres * 205/65 R 17.5 Axles * BPW axles and suspension * 1st axle rigid, remaining axles hydro-mechanically forced-steered * Air suspension with lift and lower valve Brake System * In accordance with EU regulations, with EBS-E (4S3M), no interconnection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection of the standard shot-blasted welded frame, ensured by a two-component (2K) zinc-rich primer * High-quality two-component (2K) topcoat, single-colour RAL 3002 carmine red * Wheels painted silver Included Accessories * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings on the galvanised front connection strip * 4 chocks with holders mounted on the front wall * Spare wheel holder in front of front wall Fedjv Etx Ejpfx Af Usft * Electro-hydraulic unit * Remote rear- and front axle steering via cable remote control with push buttons, includes single-track monitoring for axles (no installation in the tractor unit required) * European reflector boards (red-yellow) at rear of trailer * Yellow reflective tape complying with EU regulations on the sides, extension and rear * On gooseneck and rear plate—left and right—each with holder for warning boards including connector * Mount for rotating beacon at the rear of the trailer * Galvanized folding supports below the bevel of the loading platform * Axle load pressure gauge including axle-load diagram * 7 pairs of WADER container pockets for: 1x 20' or 1x 40' container on the platform, 1x 40' container above the gooseneck, or 2x 20' containers * Support bracket with 1 pair of WADER container pockets, kingpin load approx. 20,000 kg * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm at the outer frame of the load platform * Galvanized extensions, extendable by approx. 230 mm per side * Movable hook-in rails for aluminium drive-on ramps at the rear of the vehicle * 1 pair of recessed lashing rings along the central beam at the rear of the load platform (LC 10,000 daN) * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable guard for the pump * 2 LED reversing lights mounted at the rear * Acoustic reverse warning signal * HRM metallisation (High Resistance Metallisation)

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA. Baujahr: 2015. 10-Tonnen SAF-Achsen. Eigengewicht: 22.250 kg. Nutzlast: 57.750 kg. Zulässiges Gesamtgewicht: 80.000 kg. Sattellast: 40.000 kg. EBS, ABS, ALB. Hydraulik arbeitet über NATO-Anschluss vom Zugfahrzeug. Aluborden auf dem Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. Luftfederung. 5 Meter ausziehbar. Funkfernbedienung. Baggerbrücke: 5600 mm x 950 mm. Bereifung: 235/75R17,5, Profil ca. 80%. Abmessungen: Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heck des Aufliegers: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2. Baujahr: 2015. 10-Tonnen SAF-Achsen. Eigengewicht: 3.650 kg. Zulässiges Gesamtgewicht: 36.100 kg. Sattellast: 16.100 kg. Luftfederung. Bereifung: 235/75R17,5, Profil ca. 70%. Deutscher Auflieger! 4 Stück verfügbar! ID NR: 590. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis sowie für alle von Heinhuis abgeschlossenen Verträge und die diesen vorausgehenden Verhandlungen. Mit jeder Art von Antwort akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: Ffjdpfx Asxrucnef Uet WhatsApp:

Stanje: rabljeno, številka stroja/vozila: YAFTL408100008968, konfiguracija osi: 3 osi, prva registracija: 01/2008, skupna dolžina: 13.400 mm, skupna širina: 2.750 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, barva: drugo, Leto izdelave: 2008, Oprema: ABS, = Additional Options and Accessories = - Steering axle - Drum brakes = Notes = Chassis Diameter of kingpin / fifth wheel: 2 inch Height of kingpin / drawbar: 120 cm Drum brake: ✓ Build year: 2008 = Further Information = Axle configuration Axle brand: Gigant Brakes: Drum brakes Suspension: Air suspension Front axle: Tire size: 245/70 R17.5; Tire tread left: 60%; Tire tread right: 35% Center axle: Tire size: 245/70 R22.5; Tire tread left: 25%; Tire tread right: 50% Rear axle 1: Tire size: 245/70 R17.5; Steering; Tire tread left: 45%; Tire tread right: 20% Rear axle 2: Tire size: 245/70 R17.5; Steering; Tire tread left: 50%; Tire tread right: 60% Weights Unladen weight: 17,500 kg Payload: 47,500 kg Gross vehicle weight (GVW): 65,000 kg Functional Superstructure brand: Faymonville = Company Information = Ffodpfx Afexhgire Ust For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: Ffodpfx Aorq Dlfef Ujt - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 73.540 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from equipment features. Full equipment list available upon request. Gooseneck: * Hydraulically liftable/lowerable and detachable gooseneck, length approx. 3,650 mm * 2 pairs of folding lashing rings on the outside (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings at the center section of the gooseneck (LC 10,600 daN) * Suitable for 6x4 or 8x4 2-axle tractor units Compact Front Chassis: * Hook mounts at front and rear, length approx. 2,200 mm * Chassis width: approx. 2,850 mm Excavator Deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle Rear Chassis: * Mechanical bolt-lug coupling for attaching a low bed at the front * Rear end cross member chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres * Front chassis: 8 x 285/70 R19.5 M+S at manufacturer’s choice * Rear chassis: 16 x 285/70 R19.5 M+S at manufacturer’s choice * Load index 150/148J Paintwork: * Complete steel construction automatically blasted with shot-blasting system after welding. Second blasting with corundum for optimal adhesion of coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure superior corrosion protection * Final paint in 2 coats of 2K topcoat, single color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side and rear walls on the gooseneck, approx. 400 mm high, anodized finish * 3.5” kingpin * Truck hydraulic connection with flow regulator (20 l/min) * Crane for supply line suspension; tractor unit fuel tank must have a minimum capacity of 80 l * With MAX Trailer coupling pieces, otherwise coupling pieces to be supplied by customer ex works * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2 * Tool kit Art. No. 612452 * Multi-coupler hydraulic connections on the gooseneck Ffedpfxexbmpls Af Uet * Front chassis with separate air connection for air impact wrench * BEKA-MAX central lubrication for a 2-axle chassis with standard grease NLGI-2 * One 7-pin socket left and right rear on front chassis for warning signs * Threaded insertion option (ø approx. 40 mm) every 500 mm on the upper flange of the excavator deck’s outer tube for lashing rings (LC 16,000 daN) * Folding extensions with steel mats, width adjustable from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle chassis with standard grease NLGI-2 * Socket on rear chassis for remote cable control of steering * Rear chassis with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on gooseneck left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of diesel engine * Operation of steering, in addition to cable remote control * One LED work light left and right on gooseneck rear plate with protect...

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA Baujahr: 2015 10-Tonnen-SAF-Achsen Leergewicht: 22.250 kg Nutzlast: 57.750 kg Zulässiges Gesamtgewicht: 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik arbeitet über NATO-Anschluss vom Zugfahrzeug Alu-Bordwände am Schwanenhals Hydraulisch abnehmbarer Schwanenhals Luftfederung 5 Meter ausziehbar Funkfernsteuerung Baggerbrücke: 5.600 mm x 950 mm Bereifung: 235/75R17,5 80 % Profil Abmessungen: Ffjdpfx Aexrubqef Uet Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodendicke: 300 mm Heck des Aufliegers: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2 Baujahr: 2015 10-Tonnen-SAF-Achsen Eigengewicht: 3.650 kg Zulässiges Gesamtgewicht: 36.100 kg Sattellast: 16.100 kg Luftfederung Bereifung: 235/75R17,5 70 % Profil Deutscher Auflieger! 4 Stück verfügbar! ID NR: 484 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis sowie für alle von Heinhuis abgeschlossenen Verträge und die ihnen vorausgehenden Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, številka stroja/vozila: YAFTL413000014309, konfiguracija osi: 3 osi, prva registracija: 01/2013, skupna dolžina: 18.600 mm, skupna širina: 2.750 mm, skupna višina: 3.250 mm, vzmetenje: hidravlika, velikost pnevmatike: 285/70 R19.5, barva: drugo, Leto izdelave: 2013, Oprema: ABS, = Additional Options and Accessories = - Steering axle - Drum brakes = Remarks = Chassis Diameter of kingpin / fifth wheel: 2 inch Drum brake: ✓ Structure Year of manufacture: 2013 Special transport Detachable gooseneck: ✓ Length over axles: 540 cm Loading platform length: 665 cm Ffjdpfx Ajxtp Rvjf Ujt Low loader: ✓ Maximum width: 3 cm (275 cm) Extendable: ✓ = Further Information = Tyre size: 285/70 R19.5 Axle make: SAF Brakes: Drum brakes Suspension: Hydraulic suspension Front axle: Dual tires; Steerable; Tyre tread left outer: 50%; Tyre tread right outer: 65% 1st middle axle: Dual tires; Steerable; Tyre tread left inner: 15%; Tyre tread right inner: 15% 2nd middle axle: Dual tires; Steerable; Tyre tread left outer: 20%; Tyre tread right outer: % Rear axle: Dual tires; Steerable; Tyre tread left inner: 45%; Tyre tread right inner: % Body brand: Faymonville STBZ-4VA = Company Information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Fjdpfoi Dwlwex Af Uoft Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: novo, največja dovoljena obremenitev: 48.010 kg, skupna masa: 66.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Extract from the equipment. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long * Gooseneck hydraulically liftable/lowerable and detachable Fodpsxbmprjfx Af Ujft * For tractor units: 6x4 or 8x4 Lowbed: * Lowbed with external beams, extendable version, SUPER LOW design, approx. 7,550 mm long * Lowbed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking * Supply lines are protected within the extendable beams and automatically adjust to the lowbed’s length * 7 pairs of lashing rings, foldable outwards (approx. LC 10,000 daN) * 6 pairs of threaded blocks on the inner beams for mounting screw-in RUD rings Rear undercarriage: * Rear undercarriage with closed outer frame, checker plate covering and continuous prism-shaped excavator trough, approx. 1,450/900 x 505 mm, open at the rear * 2 pairs of lashing rings foldable outwards (approx. LC 10,000 daN) * 1 pair of lashing rings flat in the trough (approx. LC 10,000 daN) * 2 pairs of lashing rings flat in the trough (approx. LC 16,000 daN) * 2 pairs of stanchion pockets for approx. 100 x 50 mm plug-in stanchions in the outer frame PENDULUM AXLE: * PENDULUM AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle leveling cylinder with automatic reset function * Hydraulic cylinder with shut-off valves and pre-locks for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at our discretion * Load index (146/146F) Braking system: * Wabco brake system per EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Paintwork: * Entire steel structure automatically blasted after welding using shot-blast equipment * Second round of blasting with corundum for optimum coating system adhesion * HRM-metallization of the complete chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL Including the following accessories: * Preparation for installation of bolt-on container positions for 1x 20' or 1x 40' container on the outer beams * Without container locks * 3.5 inch king pin * One galvanized steel front wall, approx. 400 mm high * Remote control steering from front and rear by cable remote with pushbuttons, with single-track monitoring of the axles (without installation in the tractor unit) * Electro-hydraulic unit * On the gooseneck: plug-in aluminium sideboards and rear board, approx. 2,000 x 400 mm (L x H) * Rear galvanized plug-in stanchions are removable (body length approx. 2,120 mm) * Hydraulic connections from gooseneck to lowbed with multi-coupler instead of screw couplings. No guarantee on seals * Separate air connection with air gun on the gooseneck * 7 pairs of stanchion pockets for approx. 100 x 50 mm plug-in stanchions in the outer frame of the loading platform * One INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck * 2 pairs of screw-in lashing rings M20 (LC 5,000 daN) * 2 pairs of screw-in RUD rings VLBG-4 M24 (LC 8,000 daN) * Foldable extensions, approx. 230 mm per side with hardwood extension boards. Maximal load on an area of approx. 200 x 200 mm.

Stanje: rabljeno, barva: zelen, Leto izdelave: 2015, Faymonville F-S44-1ACA. Baujahr: 2015. SAF-Achsen, 10 t. Eigengewicht: 22.250 kg. Nutzlast: 57.750 kg. Gesamtgewicht: 80.000 kg. Sattellast: 40.000 kg. EBS, ABS, ALB. Hydraulik vom Lkw über NATO-Anschluss steuerbar. Alu-Bordwände am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. Luftfederung. 5 Meter ausziehbar. Funkfernbedienung. Baggerbrücke: 5.600 mm x 950 mm. Bereifung: 235/75R17,5, Profiltiefe 80%. Abmessungen: Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Fjdpfx Asxp In Sef Ueft Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heckauflage: L: 5.600 mm B: 2.750 mm H: 1.050 mm Dolly D-2. Baujahr: 2015. SAF-Achsen, 10 t. Eigengewicht: 3.650 kg. Gesamtgewicht: 36.100 kg. Sattellast: 16.100 kg. Luftfederung. Bereifung: 235/75R17,5, Profiltiefe 70%. Deutscher Auflieger! 4 Stück verfügbar! ID-Nr.: 427 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten von Heinhuis, für sämtliche von Heinhuis abgeschlossenen Verträge sowie für alle diesen vorangehenden Verhandlungen. Durch jede Form der Kontaktaufnahme erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, lastna masa: 6.350 kg, največja dovoljena obremenitev: 38.650 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Loading Platform: - 2 pairs of folding external lashing rings (LC 5,000 daN) - 24 pairs of cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST mechanical landing legs with 2-speed gearbox, 24 t lifting capacity (50 t test load) Axles and Tyres: - BPW axles, air suspended, with disc brakes (430 mm), lift/lower function - Tyres: 385/65 R 22.5 Braking System: - WABCO braking system compliant with EU regulations featuring EBS-E (2S2M) Paintwork: - Premium and durable corrosion protection of the standard grit-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat in single-tone MB 7350 Novagrau - Rear section metallized and painted in RAL 9010 (pure white) - Metallic paintwork not possible Steel Construction: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Ffedoiu Etkepfx Af Uot Electrical System: - Electrical system in accordance with EU regulations - Lighting: 24 volt - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets - Connection standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection bar - 4 wheel chocks with holders - 2" king pin - Galvanized steel front wall approx. 1,600 mm high, EN12642-XL - White reflector tape according to EU regulations, lateral and rear red - European reflective panels (red-yellow) at the rear of the trailer - Loading platform with approx. 30 mm thick hardwood flooring, framed in omega profiles - 10 pairs of stanchion sockets for 100 x 50 mm plug-in stakes in the outer frame - 3 pairs of transverse stanchion rack strips, fitted in the loading platform, for 100 x 50 mm plug-in stakes - Bracket for 1,000 mm plug-in stakes, rear in the central beam - 1 spare wheel carrier under the loading platform on the right hand side - 1 mudflap at the rear of the trailer - Manual and description on USB stick - Bracket for beacon at the rear of the trailer - Holders for warning signs including socket at the gooseneck and left/right rear panel - 6 pairs of WADER container locks on the loading platform for 1x 20ft, 2x 20ft, or 1x 40ft container, flush with rear - 80 km/h speed stickers at the rear and both sides - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light - Load gauge for axle load determination including load diagram - HRM (High Resistance Metallisation) of the outer frame - Complete steel structure is grit blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminium 15%) by hot coating

Stanje: novo, največja dovoljena obremenitev: 45.820 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete stock of immediately and soon available vehicles on our website. Excerpts from the equipment. Full specification on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and a rear chamfer of approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood floor approx. 30 mm thick Extendable load area: * Extendable loading area with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front end of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood floor approx. 48 mm thick, over the axles with checker plate Axles: * BPW axles and suspension * 1st axle fixed, all other axles forced steered via hydro-mechanical system * Technical axle load: 12,000 kg each * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 245/70 R 17.5 3PMSF, load index (146/146 F) * Manufacturer subject to our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit via standardized EBS interface in accordance with ISO 11992 * For correct display, the tractor unit must be able to transmit and display this data Landing gear: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco braking system compliant with EU regulations, EBS-E (4S3M), without supply lines to the tractor unit Paintwork: * Entire steel structure automatically shot-blasted after welding using a wheel blast machine * Second blasting treatment with corundum for optimal adhesion of coating system * Final painting with 2 coats of 2K top coat, solid color in RAL 3002 Carmine Red according to RAL system 841GL * Rims painted in silver-grey * Rear section metallized and painted in RAL 9010 Pure White * Metallic finish not available * Paint structure tested in salt spray fog test according to ISO 9227-NSS * Cavity sealing with special wax Steel structure: * High-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: Ffedpfx Aoxbmpfsf Ust * Electrical system compliant with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED position marker lights flash in sync with indicators * ASPÖCK-UNIBOX on front wiring rail with 24N, 24S & 15 pin sockets. Wiring in accordance with ISO. * 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings fitted at galvanized front wiring rail * Electro-hydraulic unit * Remote steering of front and rear via cable remote with push buttons, incl. single-track axle control (without installation in tractor unit) * Galvanized folding supports under chamfered load area * 1 pair of recessed lashing rings alongside the central beam at the rear chamfer (LC 10,000 daN) * On gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H) * Rear galvanized plug-in stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets in the loading area for a 20' (30?) or a...

Stanje: rabljeno, barva: rumena, Leto izdelave: 2013, Faymonville STZ-3UB Baujahr: 2013 10 t SAF-Achsen Leergewicht: 12.300 kg Zuladung: 29.700 kg zul. Gesamtgewicht: 42.000 kg Sattellast: 18.000 kg Servolenkung, 3 gelenkte Achsen Geschlitzter Ladeboden Seilwinde Aluminium-Bordwände am Schwanenhals Hydraulik vom Auflieger kompatibel mit NATO-Anschluss Funkfernsteuerung Luftfederung Hydraulische Brücke vom Boden zum Schwanenhals Länge: 3.000 mm 2-Punkt-Hydraulik-Stützfüße am Heck 2-fach hydraulische Auffahrrampen: Länge: 2.800 + 1.700 mm Abmessungen: Schwanenhals: L: 3.750 mm B: 2.500 mm H: 1.380 mm Sattelhöhe: 1.150 mm Ladefläche: L: 9.600 mm B: 2.550 mm H: 900 mm Bereifung: 245/70 R17,5 80 % Profil ID-Nr.: 436 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf alle Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, sämtliche von Heinhuis geschlossenen Verträge und den ihnen vorausgehenden Verhandlungen Anwendung. Durch jede Form der Rückmeldung akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, davon Kenntnis genommen zu haben. Unsere Preise verstehen sich als Export-Netto-Preise. = Weitere Informationen = Baujahr: 2013 Leergewicht: 12.300 kg Fsdjxp Iivjpfx Af Uoft Zuladung: 29.700 kg zGG: 42.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: novo, lastna masa: 8.300 kg, največja dovoljena obremenitev: 36.700 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.080 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22.5, barva: siv, Oprema: ABS, dvižna zadnja plošča, Loading platform: Loading platform in extendable design with pneumatically operated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Landing legs: JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with lift/lower function Trailing steering axle with electromagnetic reverse lock, activated via reverse gear or manually Axle tools Tires 385/65 R 22.5 Braking system: WABCO braking system in accordance with EU regulations with EBS-E Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer A high-quality single-color 2-component topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 No metallic paint available Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N / S355MC S690QL / S700MC Ffjdpfxeikyh Hj Af Ust Electrical system: Electrical system in accordance with EU regulations Lighting: 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX at the front connection bar with 24N, 24S and 15-pin sockets Connection according to ISO Accessories included: Front galvanized connection bar with yellow-red air couplings One galvanized steel front wall approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holders White reflector tape according to EU regulations on the sides, on the extension, and in red at the rear European reflective plates at the rear of the trailer Loading platform with approx. 30 mm thick hardwood floor enclosed in omega profiles 10 pairs of stake pockets for insertable stakes 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform, right-hand side in the direction of travel Manual and description One holder for a rotating beacon at the rear of the trailer On the gooseneck and each side of the rear plate (left and right), a bracket for warning panels incl. socket Anti-slip sand layer painted onto the central beam 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; the extension includes an additional locking point for one 45ft container 4 pairs of transverse stake pocket rails mounted in the loading platform for plug-in stakes 100 x 50 mm One galvanized holder transversely under the loading platform, 2,390 x 720 x 400 mm Access ladder mounted right-hand side in direction of travel Front axle lift axle with control via TEBS E depending on current axle load and load status Load manometer for determining axle loads, including load chart HRM metallization of the outer frame: complete steel structure shot-blasted, then the defined visible surfaces metallized hot-finished with ZINACOR 850

Stanje: novo, največja dovoljena obremenitev: 39.670 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Complete specifications available upon request. Gooseneck: * Gooseneck with approx. 30 mm thick hardwood flooring * Gooseneck rear in straight version * 3 pairs of lashing rings (LC 5,000 daN) Load area: * Extendable load area * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of flat-mounted lashing rings at the front of the load area (LC 10,000 daN) * Cutouts in the outer frame of the load area for attaching tensioning straps (LC 2,000 daN) * Approx. 48 mm thick hardwood flooring, chequer plate covering above the axles Landing legs: JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two fixed axles, two trailing steerable axles * Air suspension with raise/lower function * Steering axles with electro-magnetic reversing lock, activated via reverse gear or manually * Drum brakes * Axle tools Tyres: * 205/65 R 17.5 * Manufacturer of our choice * TPMS tyre pressure monitoring system per ECE R 141 * Data transmission to the tractor unit via standardized EBS interface according to ISO 11992 * The tractor unit must be able to transmit and display this data correctly Brake system: * Brake system according to EU regulations with EBS-E (4S3M), without connectors to the tractor Steel structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically shot-blasted after welding using a turbine blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection * Topcoat with 2 coats of 2K paint, single-colour in RAL 3002 carmine red as per RAL System 841GL * Rims in silver * Rear section metalized and painted in RAL 9010 (pure white) * Metallic paint not available * Paint structure tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system: Fedpfx Aexarlvef Ujft * Electrical system in line with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators * ASPÖCK-UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connection according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Included accessories: * 2" kingpin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings on the galvanized front connection terminal * Galvanized folding supports under the load area's slope * One galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, removable ALU side and rear walls, approx. 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable (body length approx. 2,560 mm) * Support block with 1 pair WADER container pockets. Saddle load approx. 20,000 kg * 7 pairs WADER container pockets for 1x 20' container in the load area * 1x 40' container in the load area, 1x 40' container over the gooseneck, 2x 20' containers * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load area * One galvanized transverse bracket under