Faymonville Platforma nakup rabljenega (202)

Stanje: rabljeno, Leto izdelave: 2015, Faymonville F-S44-1ACA. Baujahr: 2015. 10-t-SAF-Achsen. Leergewicht: 22.250 kg. Zuladung: 57.750 kg. Gesamtgewicht: 80.000 kg. Sattellast: 40.000 kg. EBS, ABS, ALB. Hydraulik arbeitet über NATO-Anschluss vom Lkw. Alu-Bordwände am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. Luftfederung. 5 Meter ausziehbar. Funkfernsteuerung. Baggerbrücke: 5.600 mm x 950 mm. Bereifung: 235/75R17,5, 80% Profil. Maße: Schwanenhals: L: 4.900 mm B: 2.500 mm H: 1.800 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Bodenstärke: 300 mm Heck: L: 5.600 mm B: 2.750 mm H: 1.050 mm Rodpfsynax Uex Af Ajp Dolly D-2. Baujahr: 2015. 10-t-SAF-Achsen. Leergewicht: 3.650 kg. Gesamtgewicht: 36.100 kg. Sattellast: 16.100 kg. Luftfederung. Bereifung: 235/75R17,5, 70% Profil. Deutscher Auflieger! 4 Stück verfügbar! ID-Nr.: 537. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Inserate, Angebote und Kostenvoranschläge der Firma Heinhuis, für alle von der Firma Heinhuis abgeschlossenen Verträge sowie für die ihnen vorausgehenden Verhandlungen. Mit jeglicher Reaktion akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 22.250 kg Zuladung: 57.750 kg zul. Gesamtgewicht: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2009, Faymonville STBZ-3VA. Baujahr: 2009. 10-Tonnen-SAF-Achsen. Eigengewicht: 16.000 - 16.500 kg. Maximales Gesamtgewicht: 60.000 kg. Sattellast: 30.000 kg. Hydraulik arbeitet auf NATO-System. Aluminium-Bordwände + Werkzeugkiste am Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. 6 m ausziehbar. 2 x 25 cm verbreiterbar. Luftfederung. Baggerbrücke: 4300 x 950 mm. Verzinkt. Abmessungen: Schwanenhals: L: 4.500 mm B: 2.500 mm H: 1.850 mm Sattelhöhe: 1.300 mm Ladefläche: L: 8.000 mm B: 2.750 mm H: 500 mm Ladebodenstärke: 300 mm Heck: L: 4.300 mm B: 2.750 mm H: 950 mm Bereifung: 235/75 R17,5, 80% Profil. Dolly D-1. Baujahr: 2008. Erstzulassung: 2009. 10-Tonnen-BPW-Achse. Rsdoynavyepfx Af Ajp Leergewicht: 2.400-2.600 kg. Maximales Gesamtgewicht: 28.000 kg. Sattellast: 18.000 kg. Bereifung: 235/75R17,5, 80% Profil. Deutscher Auflieger! 2 Stück verfügbar! ID-Nr.: 631. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Anzeigen, Angebote und Offerten der Firma Heinhuis, für sämtliche mit der Firma Heinhuis geschlossenen Verträge sowie für die ihnen vorangegangenen Verhandlungen. Durch jegliche Form der Reaktion akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2009 Leergewicht: 16.000 kg Zuladung: 44.000 kg zul. Gesamtgewicht: 60.000 kg Aufbau ausziehbar: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville STBZ-4VA Baujahr: 2012 10-t-SAF-Achsen Eigengewicht: 22.500 kg Nutzlast: 57.500 kg Gesamtgewicht (zGG): 80.000 kg Sattellast: 40.000 kg EBS, ABS, ALB Hydraulik des Aufliegers funktioniert mit NATO-Stromversorgung Hydraulisch abfahrbares Schwanenhals Ausziehbar um 5 Meter 2 x Reserverad Feuerverzinkt Luftfederung Baggerbrücke: 5600 x 950 mm Kabelfernbedienung Abmessungen: Schwanenhals: L: 4.500 mm B: 2.550 mm H: 1.750 mm Sattelhöhe: 1.250 mm Ladefläche: L: 7.550 mm B: 2.750 mm H: 530 mm Bodenstärke: 350 mm Rsdpfx Afjynavgj Aop Heck Auflieger: L: 5.600 mm B: 2.750 mm H: 1.000 mm Bereifung: 235/75R17,5 80% Dolly D-2 Baujahr: 2012 10-t-SAF-Achsen Eigengewicht: 4.300 kg Gesamtgewicht (zGG): 38.000 kg Sattellast: 18.000 kg Luftfederung Bereifung: 235/75R17,5 70% Deutscher Auflieger! ID-Nr.: 629 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Anzeigen, Angebote und Offerten von Heinhuis, für alle von Heinhuis abgeschlossenen Verträge sowie für die diesen vorausgehenden Verhandlungen. Durch jede Art der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 22.500 kg Zuladung: 57.500 kg zGG: 80.000 kg Ausziehbarer Aufbau: Ja Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2009, Faymonville STBZ-3VA. Baujahr: 2009. 10-t-SAF-Achsen. Eigengewicht: 16.000 - 16.500 kg. Zulässiges Gesamtgewicht: 60.000 kg. Sattellast: 30.000 kg. Hydraulik kompatibel mit NATO. Allu-Bordwände + Werkzeugkasten auf dem Schwanenhals. Hydraulisch abnehmbarer Schwanenhals. 6 m ausziehbar. 2 x 25 cm verbreiterbar. Luftfederung. Baggerbrücke: 4300 x 950 mm. Verzinkt. Abmessungen: Schwanenhals: L: 4500 mm B: 2500 mm H: 1850 mm Sattelkupplungshöhe: 1300 mm Ladefläche: L: 8000 mm B: 2750 mm H: 500 mm Bodenstärke: 300 mm Heck Auflieger: L: 4300 mm B: 2750 mm H: 950 mm Bereifung: 235/75R17,5, 80% Profil Dolly D-1. Baujahr: 2008. Erstzulassung: 2009. 10-t-BPW-Achse. Eigengewicht: 2400-2600 kg. Zulässiges Gesamtgewicht: 28.000 kg. Sattellast: 18.000 kg. Bereifung: 235/75R17,5, 80% Profil. Deutscher Auflieger! 2 Stück verfügbar! ID NR: 632. Die Allgemeinen Geschäftsbedingungen von Heinhuis gelten für sämtliche Anzeigen, Angebote und Kostenvoranschläge von Heinhuis, für alle von Heinhuis geschlossenen Verträge sowie für die diesen vorausgehenden Verhandlungen. Durch jegliche Form der Kontaktaufnahme akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2009 Leergewicht: 16.000 kg Zuladung: 44.000 kg zul. Gesamtgewicht: 60.000 kg ausziehbarer Aufbau: Ja Preis: auf Anfrage = Firmeninformationen = Für mehr Informationen: Rsdpeynavasfx Af Asp WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2012, Faymonville SPZ-3A. Baujahr: 2012. 9-Tonnen-SAF-Achsen. Eigengewicht: 9.260 kg. Nutzlast: 35.740 kg. Max. Gesamtgewicht: 45.000 kg. Sattellast: 18.000 kg. Hydraulik funktioniert über NATO-Anschluss vom Zugfahrzeug. Verzinkt. 8 Meter ausziehbar. Servolenkung, 3 gelenkte Achsen. Luftfederung. Zwischentisch: 125 mm. Bodenmaße: Länge: 13.720 mm. Rsdjynai Tjpfx Af Aop Breite: 2.540 mm. Höhe: 1.500 mm. Sattelhöhe: 1.250 mm. Bereifung: 385/65R22,5, Profil 80%. Deutscher Auflieger! ID-Nr.: 568. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Preisvoranschläge von Heinhuis, für sämtliche Verträge, die von Heinhuis abgeschlossen werden, sowie für die diesen Verträgen vorausgehenden Verhandlungen. Durch jede Form der Reaktion erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen von Heinhuis an und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise verstehen sich als Netto-Exportpreise. = Weitere Informationen = Baujahr: 2012 Leergewicht: 9.260 kg Zuladung: 35.740 kg zulässiges Gesamtgewicht: 45.000 kg Ausziehbare Ausführung: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2021, Faymonville F-S42-1ACA Baujahr: 2021 12 t SAF-Achsen Max. Gesamtgewicht: 49.000 kg Sattellast: 25.000 kg Hydraulikversorgung über NATO-Anschluss vom Zugfahrzeug Hydraulisch abfahrbares Schwanenhals Werkzeugkästen und Alu-Bordwände am Schwanenhals 2 x 25-fach verbreiterbar inkl. Verbreiterung 2 x ausziehbar: 1: 5.100 mm 2: 5.500 mm Gesamtlänge ausziehbar: 10,6 Meter Luftfederung Zwangsgelenkte Achsen Funk-Fernbedienung 3 herausnehmbare Bodenbohlen Abmessungen: Schwanenhals: L: 4.100 mm Rsdpfxsym Rv Us Af Asp B: 2.500 mm H: 1.550 mm Sattelhöhe: 1.250 mm Ladefläche: L: 6.850 mm B: 2.550 mm H: 430 mm Bodentiefe: 280 mm Heck der Auflieger: L: 2.800 mm B: 2.550 mm H: 1.000 mm Bereifung: 235/75R17,5 70 % Profiltiefe ID-Nr.: 489 Die Allgemeinen Geschäftsbedingungen der Heinhuis finden auf alle Inserate, Angebote und Offerten sowie sämtliche von Heinhuis abgeschlossenen Verträge und den diesen vorangehenden Verhandlungen Anwendung. Durch jegliche Form der Rückmeldung erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2021 zulässiges Gesamtgewicht: 49.000 kg ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 06/2015, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/17.5, barva: rdeča, Leto izdelave: 2015, Oprema: ABS, = Dodatne opcije i oprema = - Vazdušno oslanjanje = Dodatne informacije = Konfiguracija osovina Dimenzije guma: 235/75/17.5 Marka osovina: SAF Kočnice: Bubanj kočnice Oslanjanje: Vazdušno oslanjanje Zadnja osovina 1: Duple gume; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Zadnja osovina 2: Duple gume; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Težine Prazna masa: 9.900 kg Nosivost: 35.100 kg Dozvoljena ukupna težina: 45.000 kg Funkcionalno Visina tovarne platforme: 55 cm Platforma na izvlačenje: Da Stanje Tehničko stanje: veoma dobro Vizuelno stanje: veoma dobro FAYMONVILLE MEGAMAX F-S42-1ACA NISKONOSEĆI POLUPRIKOLICA SA 2 OSOVINE Rodpfx Aow Dqvwsf Ajp SAF osovine Vazdušno oslanjanje 1. i 2. osovina su upravljačke Nosivost 35,1 tona WABCO EBS-E Dužina tovarne platforme 610 cm + izvlačivo 250 cm Širina tovarne platforme 254 cm Debljina platforme 20 cm Visina platforme +/- 55 cm Izliv za stilski most bagera: dužina 315 cm, širina 75 cm, dubina 28 cm Bočni reflektori pozadi Mesta za učvršćivanje tereta na platformi Kutija za alat Povratno točak 4 x klin za točak

Stanje: rabljeno, največja dovoljena obremenitev: 42.700 kg, skupna masa: 58.600 kg, konfiguracija osi: 3 osi, prva registracija: 07/2013, Oprema: ABS, Vehicle identification number (VIN): YAFTL313000014137 First registration: 18/07/2013 Next German inspection (HU) due Unladen weight: 15,900 kg Overall length: 16,700 mm Gooseneck: 3,700 mm Swing clearance (king pin to rear): approx. 2,700 mm Standard king pin: 3.5 inch - Coupling height: 1,320 - 1,350 mm Lowbed length: 8,500 mm - Loading height: approx. 500 mm EXTENDABLE by 4,250 mm Chassis frame: 4,500 mm - Loading height: approx. 900 mm Redpfxertlxhj Af Aep Suspension travel (with air suspension): approx. -80/+160 mm Excavator recess – Bucket arm recess Hydraulic outriggers Technical fifth-wheel load up to 25,000 kg Axle loads: 3 x 11,200 kg Axle spacing: 1,360 mm SAF axles with drum brakes 3 x hydraulically forced-steered axles with radio + cable remote control Tyres: 235/75 R 17.5

Stanje: rabljeno, največja dovoljena obremenitev: 45.900 kg, skupna masa: 58.600 kg, konfiguracija osi: 3 osi, prva registracija: 06/2013, Oprema: ABS, Vehicle identification number: YAFTL313000014129 First registration: 05.06.2013 German roadworthiness inspection (HU) due Unladen weight: 12,700 kg Overall length: 17,000 mm Gooseneck: 3,700 mm King pin standard 3.5 inch – fifth wheel height: 1,320 - 1,350 mm Low-bed length: 8,500 mm – loading height: approx. 450 mm (ground clearance approx. 150 mm) Chassis frame: 4,300 mm – loading height: approx. 900 mm Suspension system – air suspension – approx. -80 / +160 mm Excavator recess – arm recess Stake pockets including stakes Technical fifth wheel load up to 25,000 kg Axle loads: 3 x 11,200 kg SAF axles with drum brakes Rsdpfxsp Spkgs Af Aop 3 x hydraulically forced-steered axles with cable remote control Tyres: 235/75 R 17.5

Stanje: rabljeno, največja dovoljena obremenitev: 42.700 kg, skupna masa: 58.600 kg, konfiguracija osi: 3 osi, prva registracija: 07/2013, Oprema: ABS, Vehicle Identification No.: YAFTL313000014136 First registration: 18.07.2013 German MOT (Hauptuntersuchung) due Curb weight: 15,900 kg Overall length: 16,700 mm Gooseneck: 3,700 mm Turning radius king pin to rear approx. 2,700 mm Standard king pin: 3.5 inch – Fifth-wheel height: 1,320 – 1,350 mm Low-bed length: 8,500 mm – Loading height: approx. 500 mm EXTENDABLE by 4,250 mm Undercarriage frame: 4,500 mm – Loading height: approx. 900 mm Suspension travel (with air suspension) approx.: -80 / +160 mm Excavator well – Bucket recess Hydraulic landing legs Technically permitted fifth wheel load up to 25,000 kg Axle loads: 3 x 11,200 kg Axle spacing: 1,360 mm SAF axles with drum brakes 3 x hydraulically forced-steered axles with radio and wired remote control Rodpfjr Dplmsx Af Ajp Tyres: 235/75 R 17.5

Stanje: rabljeno, največja dovoljena obremenitev: 29.560 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, skupna širina: 255 mm, skupna višina: 900 mm, Leto izdelave: 2008, Oprema: ABS, Ta lep Faymonville polpriklopnik sicer potrebuje novo barvo, vendar ima že opravljen tehnični pregled. Opremljen je z dvigalno ploščadjo in zložljivimi, hidravlično nastavljivimi rampami, ki jih je možno tudi bočno premikati. S 3-osno SAF osjo in z vitlom je takoj pripravljen za uporabo. Rsdpfx Aeymvuief Asp

Stanje: rabljeno, barva: rumena, Leto izdelave: 2022, Faymonville F-S46-1AAB. Baujahr: 2022. 12 Tonnen BPW-Achsen. Eigengewicht: 15.300 kg. Nutzlast: 84.700 kg. Zulässiges Gesamtgewicht: 100.000 kg. Sattellast: 28.000 kg. Hydraulik betreibbar über die Hydraulikanlage des Zugfahrzeugs. Funkfernsteuerung. EBS, ABS, ALB. Verzinkt. Reserverad. 1. und 2. Achse Liftachsen. 1 Achse zwangsgelenkt (Nachlaufachse). 3., 4., 5. und 6. Achse zwangsgelenkt (hydraulische Zwangslenkung). Hydraulische Federung. Edelstahl-Staukästen. Maße Ladefläche: Länge: 15.000 mm Breite: 2.550 mm Höhe: 1.600 mm Sattelhöhe: 1.300 mm Bereifung: 445/65R22,5 80% Profil Rodpfeymnadsx Af Aop 4 Stück verfügbar! Wie neu! ID-Nr.: 595 Die Allgemeinen Geschäftsbedingungen der Heinhuis finden auf alle Inserate, Angebote und Kostenvoranschläge von Heinhuis, sämtliche von Heinhuis geschlossenen Verträge sowie auf die ihnen vorausgehenden Verhandlungen Anwendung. Mit jeder Form der Kontaktaufnahme erkennen Sie die Anwendung der Allgemeinen Geschäftsbedingungen der Heinhuis an und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 15.300 kg Zuladung: 84.700 kg zGG: 100.000 kg Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rumena, Leto izdelave: 2022, Faymonville F-S46-1AAB. Baujahr: 2022. 12-Tonnen-BPW-Achsen. Leergewicht: 15.300 kg. Zuladung: 84.700 kg. Gesamtgewicht (zGG): 100.000 kg. Sattellast: 28.000 kg. Der hydraulische Betrieb erfolgt über die Hydraulik des Zugfahrzeugs. Rjdpsymm U Hofx Af Aop Funkfernsteuerung. EBS, ABS, ALB. Feuerverzinkt. Reserverad. 1. und 2. Achse als Liftachse. 1 Achse zwangs-/nachlaufgelenkt. 3., 4., 5. und 6. Achse elektrohydraulisch gelenkt (Power Steering). Hydraulische Federung. Edelstahl-Werkzeugkästen. Abmessungen Ladefläche: L: 15.000 mm. B: 2.550 mm. H: 1.600 mm. Sattelhöhe: 1.300 mm. Bereifung: 445/65R22,5 80 %. 4 Stück verfügbar! Wie neu! ID NR: 653. Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis gelten für alle Inserate, Angebote und Offerten von Heinhuis sowie für sämtliche mit Heinhuis geschlossene Verträge und den ihnen vorausgehenden Verhandlungen. Durch jegliche Form der Antwort erkennen Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis an und erklären, dass Sie von deren Inhalt Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 15.300 kg Zuladung: 84.700 kg zGG: 100.000 kg Preis: Auf Anfrage = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2015, Faymonville F-S42-2 ACB Baujahr: 2015 12 t SAF Pendel-X Achsen Redpfx Afoymafxj Aep Eigengewicht: 12.900 kg Nutzlast: 29.100 kg Gesamtgewicht: 49.000 kg Sattellast: 25.000 kg Hydraulik läuft auf NATO-Strom Ersatzrad ABS, EBS, ALB Hydraulisch abnehmbarer Schwanenhals Alu-Bordwände + Werkzeugkasten am Schwanenhals Ausziehbar um 5,5 Meter Servolenkung Hydraulische Federung Baggerbrücke Feuerverzinkt Zwischentisch: 500 mm Fernbedienung mit Kabel Abmessungen: Schwanenhals: L: 3.700 mm B: 2.480 mm H: 1.500 mm Sattelhöhe: 1.200 mm Plattform: L: 6.850 + 500 mm Tisch B: 2.550 mm H: 370 mm Bodenstärke: 220 mm Heck des Aufliegers: L: 2.550 mm B: 2.550 mm H: 1.000 mm Bereifung: 245/70R17,5, 90 % Profil Deutscher Auflieger! ID-Nr.: 486 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Inserate, Angebote und Offerten, für jede von Heinhuis geschlossene Vereinbarung sowie für deren jeweilige vorangegangene Verhandlungen. Durch jede Form der Kontaktaufnahme akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und bestätigen, dass Sie von deren Inhalt Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2015 Leergewicht: 12.900 kg Zuladung: 29.100 kg gesamtes zulässiges Gewicht: 49.000 kg ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: zelo dobro (rabljeno), številka stroja/vozila: YAFTL2007F0017329, prva registracija: 09/2015, dolžina tovornega prostora: 20.180 mm, širina tovornega prostora: 3.000 mm, barva: drugo, Leto izdelave: 2015, Poškodbe: nobenih YAFTL2007F0017329 = Dodatne informacije = Lastna teža: 13.600 kg Nosilnost: 28.400 kg Skupna dovoljena masa: 42.000 kg Izvlečna nadgradnja: Da Redpjymrb Sjfx Af Asp Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Cena: Na zahtevo

Stanje: rabljeno, največja dovoljena obremenitev: 59.740 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2008, skupna širina: 2.750 mm, Leto izdelave: 2008, Oprema: ABS, Nizkopodna prikolica Faymonville Multimax STN-4AU 4 osi, prva os dvignljiva, 3. in 4. os vodljivi 3 m teleskopsko izvlečljiva Širina 2,75 m, razširljiva na 3,20 m Lastna teža: 13.260 kg Obremenitev na sedlo: 25.000 kg Nosilnost: 59.740 kg Rjdpfx Afex Sb Dzs Aop Hidravlične rampe

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 38.500 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm hardwood flooring Load Area: - Extendable loading area with rear taper approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with square climbing strips 15 x 15 mm, including lower extensions - Between the 1st and 2nd axle, a pair of fixed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the bevel as well as protruding into the loading area for parking excavator dipper stick approx. 2,900 x 750 x 210/290 mm - 1 pair of lashing rings, installed flat at the front of the load area (LC 10,000 daN) - 5 pairs of folding lashing rings on the outside (LC 5,000 daN) - 2 pairs of folding lashing rings on the outside (LC 10,000 daN) - 2 pairs of lashing rings in the dipper stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the load area for securing straps (LC 2,000 daN) - Incl. three-part removable galvanized covers over the wheel recesses – max. point load 3.5 t / pc. Two-piece Steel Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood surfacing - Ramp with hydraulically folding ramp sections, hydraulic lifting gear, and hydraulically adjustable Axles and Tyres: - BPW axles and suspension, 2 rigid axles, 1 steering trailing axle - Technical axle load: 12,000 kg Rsdpfx Aeup U Hzsf Aep - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lifting and lowering valve - Axle tool kit - Tyres 235/75 R 17.5 - TPMS tyre pressure monitoring system in accordance with ECE R 141 Accessories Included: - Mounts for warning signs left and right at the gooseneck and at the rear, each with socket - One spare wheel - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized front connector strip - 4 wheel chocks - Galvanized, extendable outriggers approx. 230 mm per side - Galvanized folding supports beneath the loading area bevel - Rear trailer bracket for rotating beacon - Cover plates for bridging the gap between ramps and load area - White reflective tape to EU regulations, sides and on extensions; rear in red - Electro-hydraulic unit installed at the rear beneath the loading area - Ramp control valves mounted on right trailer side - European reflective panels (red-yellow) on rear of trailer - Four extendable warning boards, approx. 423 x 423 mm, with position light - Bracket for rotating beacon on warning boards - Removable ALU side boards and rear board on gooseneck approx. 2,440 x 400 mm - Rear galvanized removable stakes (structure length approx. 2,560 mm) - 2 pairs of WADER container pockets in loading area for 20ft or 30ft container - 3 pairs of socket pockets for stakes 100 x 50 mm in outer frame of loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - Square climbing strips 20 x 20 mm spaced every 200 mm on outer frame at loading bevelling - Painted sand layer on chequer plates of the gooseneck and loading area for anti-slip protection - 80 km/h speed stickers rear and both sides - Load manometer for axle load measurement, including load chart.

Stanje: novo, lastna masa: 10.700 kg, največja dovoljena obremenitev: 38.800 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r 17,5, barva: sivo-črna, Oprema: ABS, Gooseneck: • Gooseneck with front corners beveled at 45° and rear taper approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Extendable loading platform: • Loading platform in extendable design with rear taper approx. 1,000 mm x 8° • Cut-outs in outer frame of loading platform for attaching tensioning straps • Approx. 48 mm thick hardwood flooring; anti-slip checker plate covering above the axles Two-piece steel ramps: • One pair of galvanized, two-piece steel ramps with approx. 48 mm thick hardwood covering • Ramps with hydraulically foldable ramp sections, hydraulic lift system, and hydraulically adjustable • Maximum load per pair: approx. 40,000 kg Axles and tires: • BPW axles and suspension, 2 rigid axles, 1 self-steering axle • Technical axle load: 12,000 kg • Electromagnetic reverse lock, activated via reverse gear or manually • Air suspension with lift and lower valve • Axle tools • 235/75 R 17.5 3PMSF Braking system: • WABCO braking system according to EU regulations with EBS-E Paintwork: • First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component zinc dust primer • High-quality, single-color top coat in MB 7350 Novagrey applied with two-component paint • Rear section metallized and painted in RAL 9010 Landing legs: • JOST landing legs with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: • Steel construction made of high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC • S690QL/S700MC Electrical system: • Electrical system in accordance with EU regulations, 24 Volt lighting • ASPÖCK-UNIBOX on front connection panel with 24N, 24S & 15-pin sockets Accessories included: • One spare wheel with holder • Galvanized steel front wall approx. 400 mm high Rjdpfjhlz S Nox Af Aep • Yellow-red air couplings on the galvanized front connection panel • 4 wheel chocks • Rear mounting bracket for beacon light at the end of the semitrailer • Recess at rear of gooseneck for ALU approach ramps • Galvanized folding supports under the loading platform taper • Cover plates to bridge the gap between ramps and loading platform • White reflector tape per EU regulations on sides, extension, and red at rear • Electro-hydraulic unit at rear, under the loading platform • On gooseneck and ramps, left and right, each with a holder for warning signs, including socket • Operating valves for the ramps located on the right side of the trailer • ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) • Four warning panels extendable by approx. 400 mm with a position light • 3 pairs of WADER container pockets in the loading platform for one 20ft, 30ft or 40ft container • 6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading platform • Galvanized extensions, extendable by approx. 230 mm per side • 20 x 20 mm square climbing strips every 200 mm on the outer frame of the platform taper • Painted anti-slip sand layer on checker plates, above king pin and loading platform • Load gauge for axle load measurement, including load diagram • HRM metallization (High Resistance Metallisation) of the outer frame • Complete steel construction shot-blasted, then defined visible surfaces metallized and hot-finished with ZINACOR 850 (Zinc 85% - Alu 15%)

Stanje: novo, lastna masa: 15.550 kg, največja dovoljena obremenitev: 47.450 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 10° Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform as well as into the bevel for accommodating the excavator dipper stick - Pneumatic locking with conical locking bolts and reinforced lock positions - Hardwood covering on the loading platform bevel Ramps: - 1 pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm - Ramps with hardwood covering - Hydraulically folding ramp tips - Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 215 mm inward - Square climbing cleats 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and Suspension: - BPW axles and suspension, 1st axle lift-steered, all other axles forced-steered with hydromechanical system - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with raising and lowering valve - Tyres 235/75 R 17.5, twin tires - TPMS tire monitoring system compliant with ECE R141 - TPMS sensors installed in all wheels including spares Accessories included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic power pack for hydraulic operations, excluding hydraulic winches - Parking position on gooseneck for warning boards when not in use - 1 spare wheel - On the gooseneck: 1 pair of removable side aluminium drop sides, approx. 400 mm high, anodised - On the gooseneck: 1 removable rear aluminium drop side, approx. 400 mm high, anodised - Above the gooseneck: approx. 40 mm thick hardwood floor, chequer plate above king pin - 2" king pin - Guide plate on gooseneck for fifth wheel, approx. 500 mm wide - 4 wheel chocks - Mechanical landing gear with 2-speed gearbox and crank - JOST Modul B – static test load = 50,000 kg - 1 intermediate table, approx. 300 mm wide - Extensions (galvanised) extendable by approx. 230 mm per side - Wheel recesses with square climbing cleats - ALU covers for the wheel recesses - 1 pair of mechanical rear supports - Remote steering at front and rear via cable remote control, with single track monitoring of axles - 1st axle with automatic lift axle function - Central lubrication system with 1 BEKAMAX brand pump - Radio remote control for remote steering, additionally to cable remote, with 2 indicator lights on the receiver as single track monitoring Rsdpsk Aht Uefx Af Aep - Wabco Smart Board System - 4 warning boards, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for revolving beacon

Stanje: novo, lastna masa: 29.600 kg, največja dovoljena obremenitev: 72.400 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.650 mm, širina tovornega prostora: 2.840 mm, višina nakladalnega prostora: 550 mm, velikost pnevmatike: 285/70 R19.5, barva: siv, obratovalna teža: 29.600 kg, Oprema: ABS, Gooseneck: - Gooseneck hydraulically liftable/lowerable and detachable - Length approx. 3,650 mm - For tractor units: 6 x 4 or 8 x 4 2-axle front bogie: - Hook mountings at front and rear - Bogie length x width approx. 2,200 mm x 2,850 mm Excavator deck "BB-A": - Telescopic excavator deck "BB-A" with drive-over bridge hooks at the front and pin-lug coupling at the rear - Length x base width approx. 6,650 mm x 2,850 mm - Beam height x beam width approx. 400 mm x 1,350 mm - Loading height 550 mm with 150 mm ground clearance 4-axle rear bogie: - Mechanical pin-lug coupling for the installation of a lowbed at the front, rear crossmember at the back - Bogie length x width approx. 5,480 mm x 2,850 mm - Multiple lashing points Pendulum axles and tyres (front and rear bogies): Rodpowcmhaefx Af Aep - "PENDULUM AXLE", all axles forced-steered via hydromechanics - Hose rupture valve on axle compensation cylinders with automatic RESET function - Hydraulic cylinders with shut-off valves and locking clips for securing in raised position - Final coating on axles: 2 layers of single-colour MB 7350 Novagrau 2K paint - Technical axle load: 12,000 kg - Hydraulic axle compensation - Tyres size 285/70 R19.5 Remote steering (after-steering): - Remote steering operable from front and rear via cable remote control with pushbuttons, including single-track monitoring for axles - Socket for remote steering control on gooseneck - Cable remote control with pushbuttons and single-track control included Accessories included: - Yellow and red air couplings on the galvanised front connection bar - Steel front wall approx. 400 mm high - 4 wheel chocks - 3.5" king pin - One 7-pin socket left and right at rear of gooseneck for warning boards - Hoisting jib with winch for spare wheel at the front face of the gooseneck - Truck hydraulic connection with flow control (40 l/min), including support jib for supply lines; tractor unit tank must have at least 80 litres capacity with couplings - Plug-in ALU side and rear boards on gooseneck, approx. 400 mm high, anodised - Control lever on gooseneck protected by foldable cover - Separate air connection with air gun on gooseneck - BEKAMAX central lubrication system: 1x on gooseneck, 1x on 2-axle and 1x on 4-axle bogie - Variomax tool kit - Multi-coupling hydraulic connectors on gooseneck and at lowbed hook interface - 2 spare wheels - One 7-pin socket left and right, at front and rear of rear bogie for warning boards - Front bogie with separate air connection for impact wrench - Foldable steel bed extensions, adjustable in width from approx. 2,850 mm to 3,250 mm - Steel bed inserts can be placed in 2 positions for sunken load area - Steel mats with rubber flooring, approx. 12 mm thick - Thread-in options (⌀ 40 mm) every approx. 500 mm on the upper flange of the excavator deck outer tube for eye bolts - One locking point at every approx. 500 mm on extension with mechanical lock - Socket on rear bogie for remote steering cable control - 2 reversing lights on rear panel - Four extendable warning boards (by approx. 2,000 mm), each approx. 423 x 423 mm with position lights - 1 work light left + right on rear panel of gooseneck with separate on/off switches - Two INOX toolboxes, approx. 855 x 340 x 390 mm - 1-cylinder Hatz diesel engine (Silent Pack) - Radio remote control for after-steering

Stanje: novo, lastna masa: 10.300 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Platform: - Loading platform after the gooseneck, hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Approx. 48 mm thick hardwood flooring, over the axles with chequer plate covering Two-part Steel Ramps: - One pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering Rjdpfx Aeu Hp Hrsf Asp - Ramps with hydraulically folding ramp parts, hydraulic lifting system, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles, Suspension and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated by reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tires 235/75 R 17.5 3PMSF - TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories Included: - One spare wheel with holder in front of the bulkhead - 2" kingpin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings at the galvanized connection strip in front - 4 wheel chocks - Galvanized folding supports under the platform's rear chamfer - A holder for a rotating beacon at the rear of the trailer - Cover plates to bridge the gap between ramps and platform - White reflective tape as per EU regulations along the sides of the trailer and red at the rear - Electro-hydraulic unit at the rear, under the platform - At the gooseneck and at the ramps left and right, each with a holder for warning signs, including socket - Control valves for the ramps positioned on the right side of the trailer - European reflective plates (red-yellow) at the rear of the trailer - Manual and description on USB stick - Removable ALU side walls and rear wall on the gooseneck approx. 2,440 x 400 mm - The rear, galvanized side stakes are removable (body length approx. 2,560 mm) - An electric cable winch with radio remote control, approx. 5,400 kg lifting force, including 9.5 mm steel cable, 24 m long, with guide roller - Bolted 5 t ring for cable deflection of the winch on the gooseneck without pulley - 2 pairs WADER container pockets in the platform for a 20ft container - 6 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the platform - Lift axle on the front axle with control via TEBS E, depending on actual axle load and loading condition - 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings along the central beam at the rear chamfer (LC 10,000 daN) - Sand coating for slip resistance painted on the chequer plates on the gooseneck and on the platform - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection - Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm - Speed stickers 80 km/h rear and on both sides - Load manometer for determining axle loads including load chart - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel construction shot-blasted, then all defined visible surfaces metallized and hot-coated with ZINACOR 850 (zinc 85% - alu 15%)

Stanje: novo, lastna masa: 10.900 kg, največja dovoljena obremenitev: 37.100 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing the loading platform length, approx. 3,700 mm long, rear bevel approx. 1,000 mm x 6° - Technical king pin load: 18,000 kg - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,600 mm long with rear taper approx. 900 mm x 6° - Platform area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, with a load capacity of up to approx. 9,000 kg - Grating surface and steel sheet floor approx. 5 mm thick as additional reinforcement on the sloped section of the platform Ramps: Redpsuadk Nsfx Af Ajp - One pair of two-section AXS steel ramps, approx. 4,675 mm long and approx. 900 mm wide - Grating surface - Hydraulically folding ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 365 mm inward - Painted sand coating on the outer frame and ramp tips - Flashing lights on the outer sides of the ramp tips with control switch next to the ramp operation panel - Ramp lock in transport position with quick-release fastener Axles, suspension and tires: - BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steerable (trailing) - 1st axle with traction assistance - Operated via brake pedal in the tractor unit - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 - TPMS tire pressure sensors installed on all wheels including spare wheels Brake system: - WABCO EBS-E braking system in accordance with EU regulations Paintwork: - Trailer MB 7350 Novagrau Equipment included: - Removable front steel wall, approx. 400 mm high - 3 kW electro-hydraulic power unit for hydraulic operations, except for hydraulic winches - Gooseneck guide plate for the fifth wheel, approx. 500 mm wide - JOST Module B – static test load = 50,000 kg - Continuous grating with 5 mm steel underlay as additional reinforcement - Painted sand coating - Cutouts in the outer frame of loading platform and lift bed for hooking hydraulic ramp control valves on the right-hand side of the vehicle - 2" king pin - Central lubrication system with 1 pump, brand BEKAMAX - 1 pair of plug-in ALU side boards on the gooseneck, approx. 400 mm high, anodised - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Steel wire rope approx. 24 m long, rope diameter approx. 9.5 mm, including rope pressure roller - WABCO Smart Board system - 4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform Rsdpfoma Hf Rox Af Aep • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: novo, lastna masa: 13.500 kg, največja dovoljena obremenitev: 51.500 kg, skupna masa: 69.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 r17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimizing loading platform length, length approx. 3,700 mm Gooseneck rear with chamfering approx. 1,000 mm x 10° Loading Platform: Telescopic loading platform, length approx. 8,800 mm, with rear chamfering approx. 500 mm x 10° Recess in the chamfer as well as into the loading platform to accommodate the excavator dipper stick Pneumatic locking with conical pin and reinforced locking positions Supply lines routed protected within the extendable beam, adapting to the respective platform length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps individually adjustable hydraulically approx. 235 mm to the outside and approx. 215 mm to the inside Axles and Suspension: BPW axles and suspension, two rigid axles, two steering trailing axles Electromagnetic reverse lock, activated via reverse gear and manually Air suspension with lift and lower valve Axle tool Tyres: 235/75 R17.5 3PMSF twin tyres Load index: 143/141J (144/144F) Brake System: WABCO braking system, EBS-E in accordance with EU regulations Lighting System: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metalizing: Standard HRM metallization of the outer frame Complete steel structure shot-blasted, then visible defined surfaces metallized with ZINACOR 850 (Zinc 85% - Alu 15%) hot-refined Steel Construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified as per DIN-EN 287-1 MAG welding process according to EN ISO 4063 Shielding gas M21 as per EN ISO 14175 Accessories Included: Front wall made of steel, plug-in, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin 24N connection per ISO-11852, 24S connection per ISO-3731, 15-pin connection per ISO-12098 Round NATO socket on the front connection strip Rsdpfx Afok Ahugo Aep Cable to supply electro-hydraulic unit and/or electric winch (35 mm², 3.5 m long) between trailer and tractor with connector (NATO-NATO) 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches 1 spare wheel with mounting adapter Outer beam of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the gooseneck's outer beam for a screwable lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck On the gooseneck, 1 pair of plug-in side aluminium walls, approx. 400 mm high, anodized On the gooseneck, a plug-in aluminium rear wall, approx. 400 mm high, anodized 2" kingpin Gooseneck guide plate for fifth wheel, approx. 500 mm wide 4 wheel chocks with holder Holder for aluminium approach ramps Mechanical landing gear with 2-speed gearbox and crank Continuous hardwood floor approx. 50 mm thick on the loading platform, interrupted between axles Platform locking with conically welded locking profiles every 250 mm incl. tension plate Slotted holes at the front of the loading platform for attachable and adjustable bridging elements 1 intermediate table with recessed platform, approx. 300 mm wide for the draw-out tube with large cross-section, with sheet metal covering Front and rear with slotted holes

Stanje: novo, lastna masa: 10.350 kg, največja dovoljena obremenitev: 39.150 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, 30 mm thick Loading area: - Telescopic loading area with rear chamfer approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - 3-piece detachable galvanized covers over the wheel recesses (W 670 mm) – max. point load 5 t / pc. - Recess in the chamfer and protruding into the loading area for the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of foldable external lashing rings (LC 5,000 daN) - 2 pairs of foldable external lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) One-piece aluminum ramps: - 1 pair one-piece ALU ramps, approx. 2,500 x 600 mm - Ramp with spring lifting mechanism and manually adjustable - Maximum load per pair: 24,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing steering axle - Technical axle load: 12,000 kg - Electromagnetic reversing lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool - Tyres 235/75 R 17.5 - TPMS tire pressure monitoring system compliant with ECE R 141 Accessories included: - 1 spare wheel with holder in front of the bulkhead - 2" kingpin - 1 galvanized steel front wall approx. 400 mm high - At the galvanized coupling rail at the front, yellow-red air couplings - 4 wheel chocks with holder at the bulkhead - Mounting point at the rear of the gooseneck for ALU ramps - Galvanized extensions, extendable by approx. 230 mm per side - Galvanized folding supports under the chamfer of the loading area - 1 holder for a rotating beacon at the rear of the trailer - White reflective tape laterally, at the extension, and red at the rear, per EU regulations - At the gooseneck and rear panel, left and right, each with a holder for warning signs including socket Rjdpfxjiu Er As Af Aep - On the gooseneck, plug-in ALU sideboards and rear wall, approx. 2,440 x 400 mm - The rear galvanized stakes are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the loading area - 1 removable galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame in the chamfer of the loading area - Anti-slip sand coating on the checker plates on the gooseneck and the loading area - Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm, with position light - Holder for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for determining axle loads including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then all defined visible surfaces metalized and hot-finished with ZINACOR 850 (Zinc 85% – Alu 15%)