Meusburger Mpj-2 2 Achs Pritschenanhänger nakup rabljenega (48.007)

Stanje: rabljeno, lastna masa: 4.140 kg, največja dovoljena obremenitev: 13.860 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2010, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5 143/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 143/141J, velikost zadnje pnevmatike: 235/75R17,5 143/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Bsdpfx Asy Igv Ijl Hodb

Stanje: rabljeno, največja dovoljena obremenitev: 26.040 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 12/2010, Leto izdelave: 2010, Oprema: ABS, Semi-trailer Meusburger MPS-2 with steered axles, Palfinger PK 26002 crane, remote control, 3 extensions: 4m 5700kg, 10m 2250kg. Tractor unit: MAN TGS 26.440 6X2 Euro 5 EEV, retarder, dual-circuit hydraulics. Condition: minor rust spots, otherwise good; technically very good. Tyres: 80-90% Bjdpfx Aerbf Uhol Hjdb

Stanje: novo, lastna masa: 10.100 kg, največja dovoljena obremenitev: 38.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, obratovalna teža: 10.100 kg, Oprema: ABS, Chassis: - Sturdy welded steel frame construction with front frame cranking and flat loading platform, rear ramped section approx. 500x100 mm - Gooseneck 200 mm with beveled corners - Sloped gooseneck end approx. 500x100 mm (traction ribs on outer frame behind rear inclination) - 2 kingpin positions with replaceable 2" kingpin - Outer frame closed on the outside as perforated frame for lashing with tension belts (chains not permitted) - Reinforced frame design / point load at the center of gravity - Prepared for extendable load platform widenings - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to end of vehicle - 1 pair wheel recesses in front of axle with steel covers (covers with Körapur coating), depth approx. 400 mm, and 1 pair between 1st and 2nd axle, steel covers Bjdpfjwviwkjx Al Hjdb - Underrun protection = extended end plate - Drop-down supports at rear Ramps: - 2-piece drive-up ramps, custom design, with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting mechanism (only in connection with electrohydraulic unit) - Width approx. 800 mm - Wood topping - Incl. traction ribs on ramps - Can be secured for travel with tension belts - Operated by manual lever mounted rear right in direction of travel - Hydraulically laterally shiftable Floor: - 35 mm larch wood floor with aluminum omega profiles Landing Gears: - Mechanical 24 t landing gears, operated from one side with load equalization Axles, Steering, and Tires: - BPW air suspension axles, each rated at 10 t axle load, airbag diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lift and lower device, total stroke approx. 200 mm - 2nd drive position via ball valve +50 mm - 1st axle as lift axle (wired via EBS), operation fully automatic with mechanical emergency actuation via button on trailer - 3rd axle as friction steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-fitted offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Plug-in side walls and rear wall on gooseneck approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 wheel chocks - Long license plate holder in end plate - 1 detachable ECE sign at rear - 11 pairs ZK modules 10t on the sides: - 2x on the gooseneck - 9x on the load platform - Steel mudguards with clear pass - Extendable warning panels incl. 3 position lamps each, front at landing gears and rear before end plate, infinitely extendable up to loading width 4,500 mm - 4 plug-in holders for warning panels in stake pockets on loading surface - 6 pairs of lateral stake pockets for 100x50 mm stakes - 2 rows of crosswise stake pockets for 100x50 mm stakes on the gooseneck from outer frame towards main frame (1x before and 1x after kingpin positions) - 3 rows of crosswise stake pockets for 100x50 mm stakes on loading platform from outer frame towards main frame (1x in front area, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in load platform for container locks to receive 1x 20ft container - Rubber apron mounted on underrun protection - Steel shot blasting, chassis hot-dip galvanized and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Nova grey

Stanje: novo, lastna masa: 8.490 kg, največja dovoljena obremenitev: 40.510 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.490 kg, Oprema: ABS, Chassis: - Robust welded steel frame structure with front frame drop and flat loading platform with rear bevel, approx. 500x100 mm - Gooseneck height 200 mm with beveled corners - Gooseneck end with bevel approx. 500 x 100 mm (traction ribs on outer frame in the area behind rear bevel) - 2 kingpin positions with interchangeable 2" kingpin - Outer frame closed outwards as slotted rail for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Provisions for extendable deck wideners - With excavator trough (without cover), approx. 220 mm deep, 600 mm wide, starting after the 2nd axle to end of vehicle - 1 pair wheel recesses in front of the axle with steel covers (covers with Körapur coating), approx. 400 mm deep, plus 1 pair wheel recesses between the 1st and 2nd axle with steel covers - Underride protection = extended end plate Bdodswu A Sljpfx Al Hsb - Hydraulic drop-down supports at rear Floor: - 35 mm larch timber floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each rated at 10 t axle load, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device, total lift approx. 200 mm - 2nd driving height via ball valve +50mm - 1st axle lift axle (wired through EBS), fully automatic actuation with manual emergency actuation via button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical locking - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring system Braking System: - Dual-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Pneumatic connection yellow/red Paintwork: - Steel shot blasting, spray galvanising of chassis and primer - Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau Accessories: - Removable side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks - Steel fenders with Clear-Pass - Long license plate holder in end plate - 1 removable ECE plate at the rear - 11 pairs ZK modules 10t lateral: - 2x on the gooseneck - 9x on the loading platform - Without rear towing eyes - Extendable warning signs including 3 position lamps each, front at landing legs and rear in front of end plate, steplessly extendable up to 4,500 mm load width - 4 insertable sockets for warning signs in stake pockets on loading platform - 6 pairs stake pockets along sides for 100x50 mm stakes - 2 cross rows of stake pockets for 100x50 mm stakes on the gooseneck from outside frame to main frame (1 before and 1 after kingpin positions) - 3 cross rows of stake pockets for 100x50 mm stakes on loading platform from outer frame to main frame (1 in front section, 1 before 1st axle, 1 after 3rd axle) - 2 pairs steel plates on loading platform for container locks to accept 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (cable routing for NATO cable and hole pattern for subsequent mounting of NATO socket at front of end plate and bracket on vehicle) for optional retrofit of electrohydraulic power unit at right rear for potential operation of access ramps - Mechanical 24-ton stabiliser landing gear with single-sided operation and compensating shaft Optional: Trailer available with aluminum folding ramps.

Stanje: novo, lastna masa: 11.000 kg, največja dovoljena obremenitev: 27.000 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.300 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 235/75 R17.5, barva: siv, obratovalna teža: 11.000 kg, Oprema: ABS, Chassis: - Welded steel frame construction with front and rear frame cranks and a lowered bed without rear chamfer - Neck and kingpin plate 225 mm - Lowered bed rated for 25 t point load over 5 m - Outer frame closed to the outside with welded-on lashing rings for securing - Interchangeable 2" king pin - Rear hook-in rail for aluminum ramps Axles and Tyres: - BPW low-loader axles, each with a 10 t axle load, air bellows diameter 360 mm - Air suspension with lifting and lowering function, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights +100 mm - S-cam brakes 300/200 mm, asbestos-free brake pads - Automatic slack adjusters - IVTM tyre pressure monitoring - 9 tyres 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically forced steered via fifth wheel coupling Floor: - Multi-layer bonded board floor, 27 mm thick, flush with outer frame and longitudinal beams - Underside reinforced with GRP coating - 12 pairs of lashing rings welded in outer frame (8 pairs RUD 8 t – 6 pairs in the lowered bed as well as one pair each on the gooseneck and at the front of the rear aggregate – 2 pairs of 4 t lashing rings on gooseneck and rear aggregate) - 6 pairs of mushroom anchors in outer frame in the lowered bed - Storage box with lid in the lowered bed floor, front left and right Front Wall: - 25 mm aluminum hollow profiles raised up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Tarpaulin curtains on both sides with integrated vertical and horizontal belts (approx. 600 mm spacing) and stainless steel tension locks - Adjustable tarp straps (overcentre) up to loading width 4,000 mm including tarpaulin extension with press studs and Velcro fastener - Tarp extension in driving direction: 300 mm, in height: 750 mm - Incl. eyelets for separate tarpaulin extension piece - 1 pair of vertical tarpaulin pockets approx. 1,000 mm long, positioned in the lowered bed at the front crank - With belt pockets Bsdpfxoiu Eu No Al Hodb Rear Wall: - Steel rear portal frame with side tarpaulin hook-in device - Aluminum double-wing door, 25 mm thick - Both door wings fully foldable with door holders - Each door wing with aluminum double-joint hinge and two recessed grip hollows Front Corner Posts: - Roof height, bolted to front side Central Posts: - 3 pairs of infinitely adjustable folding posts - Posts are movable along the entire length via trolley - Middle posts in the lowered bed also fixable at the rear platform Roof: - EDSCHA sliding roof (galvanized) with cross beams movable in both directions (stacked forward inside the cargo area) - Rear portal cross beam swivels away - PVC tarpaulin roof without customs closure - Manually operated hydraulic lifting roof on both sides, lift 450 mm - Movable lifting roof in positions front (9x50) and rear (9x50), can be driven at increased height - Including tarpaulin extension and apron at rear - Roof can be cranked out 900 mm at front wall Accessories: - Extendable warning signs (removable at front and rear, with socket) incl. position lights up to loading width 4,000 mm - Storage for 4 warning signs on inside of front wall, top right and left - 1 aluminum ladder with holder 2,500 mm long on front wall - 2 rows of self-securing aluminum slats - Metal mudguards with splash flaps - 1 overnight parking plate and 1 ADR plate on rear wall - BEKAMAX central lubrication system with pump and grease class 2 for approx. 35 lubrication points - Electrohydraul

Stanje: rabljeno, lastna masa: 4.150 kg, največja dovoljena obremenitev: 13.850 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/1992, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 7.200 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 2 osi, vrtljivi oje, zračno vzmetenje, ABS (sistem proti blokiranju koles), pritrdilna ušesa, zaščita pred naletom, stranska aluminijasta zaščita, nihajna vrata. Nadgradnja: 2-osna prikolica s platojem z aluminijastimi stranskimi stenami. INFORMACIJE O DODATKIH BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Bdsdpfx Alexddxvo Hjb

Stanje: novo, lastna masa: 8.950 kg, največja dovoljena obremenitev: 40.050 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.950 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with front frame cranking and flat loading area with rear taper approx. 500x100 mm - Neck of frame 200 mm with beveled corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area behind rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outside as perforated outer frame for lashing with tie-down straps - Reinforced frame design / point load at center of gravity - Prepared for extendable width extensions in the loading area - With excavator trough, depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended end plate - Drop-leg supports at rear Ramps: - 2 pieces, single-part aluminium loading ramps with spring lift system - Dimensions (L x W) approx. 2,500 mm x 600 mm - Can be locked in transport position with tie-down straps - Laterally adjustable by hand Floor: - 35 mm larch wood floor with aluminium omega-profiles Landing Gear: - Mechanical 24 t landing gears with single-sided operation and load compensation Axles, Steering, and Tyres: - BPW air suspension axles, 10 t axle load each, air spring diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift/lowering device with total travel approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired via EBS), fully automatic confirmation with mechanical emergency operation by push button on trailer - 3rd axle is friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, hub-centered - 12 tyres 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-loaded parking brake - Air connections yellow / red Paintwork: - Steel shot-blasting, chassis spray galvanising and priming - Chassis / wheel hub / outer frame painted in DB 7350 Novagrau - Plastic parts black, unpainted - Rims: factory silver - Reflective strips on sides and rear in yellow Accessories: - Removable side and rear walls approx. 400 mm high on gooseneck - Spare wheel bracket - Aluminium bump guard - 4 wheel chocks Bjdpjwu Agijfx Al Hjdb - Sheet metal mudguards with Clear-Pass - Long licence plate holder in end plate - 1 removable ECE board at rear - 11 pairs ZK modules 10 t at sides: - 2x on gooseneck - 9x on loading area - Without tow rings at rear - Extendable warning boards incl. 3 position lights each, front at landing gears and rear before end plate, infinitely extendable to loading width 4,500 mm - 4 mounting holders for warning boards plug-in type in stake pockets on loading area - 6 pairs of stake pockets at sides for 100x50 mm plug-in stakes - 2 rows transversely on gooseneck for 100x50 mm plug-in stakes from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows transversely on loading area for 100x50 mm plug-in stakes from outer frame to main frame (1x front section, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in loading area for container locks, suitable for 1x 20ft container - Rubber apron fitted on underrun protection

Stanje: rabljeno, največja dovoljena obremenitev: 42.500 kg, skupna masa: 60.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2022, with 12 axles, divided, hydraulically suspended, with hydromechanical forced steering, with rear taper and drive-on ramps STZ-L Gooseneck - robust welded steel construction - formed loading area 3,950 x 2,480 mm incl. tapered rear section - hydromechanical forced steering (dual-circuit steering) - turntable-mounted king pin plate with replaceable 2 or 3.5 inch king pin and adjustable steering wedge - fifth wheel load 24 t - rear turning radius: 2,600 mm Loading Deck - stepped outer beams 4,630 mm, 420 mm deep, providing a loading height of 470 mm or 830 mm with decking installed - extendable by 2,053 mm - includes aluminium bridging rails for creating a flat surface - excavator arm recess at rear of chassis: 4,900 mm long, 880 mm wide, 480 mm deep - chassis length at rear: 4,900 mm including 500 mm rear taper, loading height 890 mm - pair of wheel recesses in lower loading area - hydraulically suspended 3-axle chassis - divided Gigant axles with 600 mm stroke Rear of Vehicle - design: 500 mm rear taper - hydraulic rear support Bdjdew Etd Tepfx Al Heb Drive-on Ramps - 2-piece ramps, length: 2,850 + 1,850 mm, width: 800 mm - rubber-coated surface with climbing strip Brake System - dual-line full air brake system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic rod plates (AGS) - parking brake operated via spring-loaded cylinders - ABV brake system Special Equipment - radio remote control for steering and ramp operation - central lubrication system Technical Data Gooseneck Loading area (LxW): 3,950 x 2,480 mm Loaded saddle height: 1,300 mm Loading Deck Loading area (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Stepped outer beams: 4,630 mm long plus 2,053 mm extension Centre beam: 980 mm Excavator arm recess: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle with hydromechanical forced steering (dual-circuit steering)

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 02/2004, dolžina tovornega prostora: 13.700 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 3.060 mm, skupna dolžina: 14.200 mm, skupna širina: 2.580 mm, skupna višina: 4.100 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, barva: drugo, Leto izdelave: 2004, Oprema: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Remarks = Number of axles: 2, twin tires, unladen weight: 11,050 kg, gross weight: 36,000 kg, chassis type: full chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year: 2004, lifting roof, sliding roof, type of low loader: low loader, loading area length: 700 cm, gooseneck length: 365 cm, axle platform length: 306 cm, axle type: BPW, 2 AXLE TRIDEC FORCED STEERING / WIDTH EXTENDABLE = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tire size: 235/75R17.5 Brakes: drum brakes Suspension: air suspension Axle 1: twin tires; steered; left inner tire tread: 10 mm; left outer tire tread: 10 mm; right inner tire tread: 10 mm; right outer tire tread: 9 mm Axle 2: twin tires; steered; left inner tire tread: 10 mm; left outer tire tread: 9 mm; right inner tire tread: 9 mm; right outer tire tread: 11 mm Weights Unladen weight: 11,050 kg Payload: 24,950 kg Gross vehicle weight: 36,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): inspected until 01.2027 Condition Overall condition: average Technical condition: average Visual condition: average Bsdoyz Nzyopfx Al Hodb Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent traders for used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractor units, and trailers. Our selection covers all European brands, model years, and price ranges. Why buy at Kleyn Trucks? It’s simple! • Large and fast-rotating stock • Recognizable quality • A good price • Proper business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) registration plates arranged quickly • Expert technical services • The certainty of "recognizable quality" • And more… Please visit our website for special offers and complete stock: Leasing with Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Stanje: rabljeno, lastna masa: 6.750 kg, največja dovoljena obremenitev: 24.750 kg, prva registracija: 04/2011, naslednji pregled (TÜV): 10/2025, skupna širina: 25.500 mm, vzmetenje: zrak, velikost pnevmatike: 425 / 65 R 22.5 / 6mm, velikost sprednje pnevmatike: 425 / 65 R 22.5 / 6mm, obratovalna teža: 31.500 kg,

Stanje: rabljeno, Leto izdelave: 2016, Meusburger MTS-2 Baujahr: 2016 12-Tonnen-Gigant-Achsen Eigengewicht: 16.250 kg Zulässiges Gesamtgewicht: 43.000 kg Sattellast: 19.000 kg Ausziehbar um 5,4 Meter 2 x 25 cm verbreiterbar inkl. Aufsteckverbreiterungen Bsdpfx Asy Ay Tiol Hsdb EBS, ABS, ALB Zentralschmieranlage Funkfernbedienung Hydraulikversorgung über NATO-Anschluss vom Lkw Verschiebbare Abdichtungen + Schiebedach Hydraulisch abfahrbares Schwanenhals Hydraulische Federung Hydraulisch um 2 x 1750 mm verbreiterbar Dach um 500 mm anhebbar Feuerverzinkt Servolenkung für 2 gelenkte Achsen Innenmaße Auflieger: Schwanenhals: L: 3.100 mm B: 2.550 mm H: 2.500 mm Ladeboden: L: 7.000 mm B: 2.550 mm H: 3.600 mm Bodenstärke: 230 mm Heck des Aufliegers: L: 2.800 mm B: 2.550 mm H: 3.000 mm Bereifung: 245/70R17,5, Profil ca. 80% ID-Nr.: 529 Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für sämtliche Anzeigen, Angebote und Kostenvoranschläge sowie für alle von Heinhuis abgeschlossenen Verträge und den vorangegangenen Verhandlungen. Durch jede Form der Rückmeldung erkennen Sie die Geltung der AGB an und bestätigen, dass Sie von diesen Kenntnis genommen haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2016 Leergewicht: 16.250 kg Zuladung: 26.750 kg zul. Gesamtgewicht: 43.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: rabljeno, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you will receive a current and comprehensive inspection and functionality report. Chassis: -Robust steel frame welded construction with front frame drop and flat cargo bed with rear taper approx. 500x100 mm -Frame neck 200 mm with beveled front corners -Tapered rear end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in rear taper area) -2 king pin positions with replaceable 2” king pin -Outer frame closed to the outside as hole profile outer frame -Cargo bed with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm -Frame before and after extension with 80x80 mm step -Reinforced frame design / point load support in retracted position at center of gravity -Without extendable widening sections in the cargo bed, but prepared for retrofitting (= guide tubes welded into the frame) -With excavator recess (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to rear end of vehicle -1 pair of wheel recesses between 1st and 2nd axles with steel covers (covers with Körapur coating), depth approx. 400 mm -Underrun protection = extended rear plate Bdodpfx Aoywv Ixjl Hsb -Drop support legs at rear Floor: -35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tires: -BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm -S-cam brakes 300/200 mm, asbestos-free brake pads -Automatic slack adjuster -Lift-and-lower system with total lift approx. 200 mm -2nd ride height via ball valve +50mm -1st axle is a lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on the trailer -3rd axle is a friction-steered trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, centrally offset -12 tires 245/70 R 17.5 143/141J, tubeless -Including tire pressure monitoring Accessories: -Removable drop sides and rear wall on the gooseneck, approx. 400 mm high -Spare wheel holder -Lateral aluminum side underrun protection -4 wheel chocks with bracket -Elongated license plate holder in the rear plate -1 plug-in ECE sign at rear -11 pairs of 10t lashing modules at the sides: 2x on gooseneck 2x on cargo bed in front of the extension 7x after extension -Without rear towing eyes -Extendable warning boards incl. 3 position lights each, front at landing gear and rear in front of rear plate, steplessly extendable to a load width of 4,500 mm -4 holders for warning boards, insertable in stake pockets on the cargo bed -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x before and 1x after kingpin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on cargo bed from outer frame inward to main frame (1x before extension, 1x after extension, and 1x after 3rd axle) -2 pairs of steel plates in the cargo bed for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection -Prepared (= cable routing for NATO cable and hole pattern for retrofit mounting of NATO socket in front section of rear plate as well as bracket on vehicle) for retrofitting electrohydraulic power pack on right rear in driving direction for potential operation of loading ramps Optional: the trailer is available with aluminum loading ramps

Stanje: rabljeno, največja dovoljena obremenitev: 26.520 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2012, Leto izdelave: 2012, Oprema: ABS, Semi-trailer Meusburger MPS-2, steered axles, crane Palfinger PK 26002, radio remote control, 4 extensions incl. rotator, 5,500kg at 4m, 1,700kg at 12m. Bdsdpfxorcz Izj Al Hjb Tractor unit MAN TGS 26.440 6X2 Euro 5 EEV, retarder, dual-circuit hydraulics. Condition: Very good, passed technical inspection (TÜV). Tyres: 65-95% tread remaining.

Stanje: rabljeno, največja dovoljena obremenitev: 21.700 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2009, Oprema: ABS, Fahrzeug-Ident-Nr.: W09PJ300980M49179 Bodpfsw Nt T Uex Al Hjdb Meusburger MPJ-3 - Erstzulassung: 03.03.2009 DE HU 03.2026 - SP 09.2025 BPW Eco Achsen mit Trommelbremsen Anhängerdeichsel verstellbar - Öse 40 mm - Kupplungshöhe ca. 350 mm PLATTFORMAUFBAU MIT RADMULDEN - mit Einhängeschienen für Alu-Rampen, OHNE RAMPEN !!! Plattformlänge: 2.850 + 5.000 mm Breite: 2.550 mm Ladehöhe im Tiefbett: 870 mm Zentralschmieranlage Werkzeugkasten Bereifung: 235/75 R 17,5 Änderungen, Zwischenverkauf und Irrtümer sind ausdrücklich vorbehalten. Die Beschreibung dient der allgemeinen Identifizierung des Fahrzeuges und stellt keine Gewährleistung im kaufrechtlichen Sinne dar. Ausschlaggebend ist die Beschreibung gemäß Kaufvertrag. Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen.

Stanje: rabljeno, največja dovoljena obremenitev: 37.040 kg, skupna masa: 47.500 kg, konfiguracija osi: 3 osi, prva registracija: 03/2006, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.750 mm, Meusburger MPS-4 cerada Poluprikolica s četiri osovine Upravljiva zadnja osovina Podizna osovina Cerada proširiva Edscha – klizni krov Mehanički podizni krov, hod cca 300 mm Nosivost: 37.040 kg Gume: 385/65R22,5 Disk kočnice Vazdušno ogibljenje Prva osovina – podizna osovina Četvrta osovina – upravljana kasneća osovina Portalna vrata Oprema za vanstandardnu širinu, prednji deo sa dve izvlačne table (skidajuće) Oprema za vanstandardnu širinu, zadnji deo sa dve izvlačne table (skidajuće) 12 pari sklopivih teških veznih očiju, svaka nosivost 5 t Bdedpfsu T Ulqex Al Hjb 12 pari bočnih čepova sa spoljnim ramom za vezivanje 16x po 3 džepa za stubiće poprečno u smeru vožnje Oba krila vrata potpuno preklopiva, sa držačem vrata. Svako krilo ima jednu aluminijumsku dvostruko zglobnu šarku i dve unutrašnje ručke. Zadnji portal sa obe strane izvlakač po 900 mm Gornja poprečna greda zadnjeg portala može da se zakrene Ojačanje rama za tovarnu tačku 33 t na 3 m Noseći spoljni ram Teretni prostor: 13.620 x 2.480 x 2.750 mm Spoljne dimenzije: 13.900 x 2.550 x 4.000 mm Izmenjiva kraljevska čaura (king pin)

Stanje: novo, lastna masa: 8.900 kg, največja dovoljena obremenitev: 40.100 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 8.900 kg, Chassis: - Robust welded steel frame construction with front frame lowering and level loading platform, rear chamfer approx. 500x100 mm - Neck height 200 mm with chamfered front corners - Chamfered end swan neck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear chamfer) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed to the outside as perforated outer frame - Loading platform with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame before and after extension with 80x80 mm step - Reinforced frame design / point load focused in the retracted state - Without extendable loading platform widenings, however, prepared for retrofitting (=guiding tubes welded into the frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after the 2nd axle, extending to the end of the vehicle - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers coated with Körapur), depth approx. 400 mm - Underrun protection = extended end plate - Drop support legs at the rear Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjuster - Lifting and lowering device with total lift approx. 200 mm - 2nd driving position via ball valve +50mm - 1st axle lift axle (wired to EBS), confirmation fully automatic with manual emergency activation via button on semi-trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centered by offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Including tyre pressure monitoring Accessories: - Plug-in side and rear boards on swan neck, approx. 400 mm high Bdjdpjxnnk Dsfx Al Hjb - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks with holder - Elongated number plate holder in end plate - 1 removable ECE sign at the rear - 11 pairs ZK modules 10t, on the side: - 2x on the swan neck - 2x on the loading platform in front of the extension - 7x after the extension - Extendable warning signs including 3 position lamps each, front at landing gear and rear before end plate, steplessly extendable up to loading width 4,500 mm - 4 plug-in holders for warning signs in stake pockets on loading platform - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 transverse rows of stake pockets for plug-in stakes 100x50 mm on the swan neck from the outer frame to the main frame (1x in front of and 1x after the kingpin positions) - 3 transverse rows of stake pockets for plug-in stakes 100x50 mm on the loading platform from outer frame to main frame (1x in front of the extension, 1x after the extension and 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection Optional: The trailer is available with ramps.

Stanje: novo, lastna masa: 9.800 kg, največja dovoljena obremenitev: 39.200 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.800 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame dip and flat loading platform featuring a rear bevel approx. 500x100 mm - Frame neck 200 mm with chamfered corners at the front - Sloped swan neck end approx. 500 x 100 mm (with anti-slip profile strips on outer frame in the area behind the rear bevel) - 2 king pin positions with replaceable 2” king pin - Outer frame closed to the outside and designed as perforated outer frame - Loading platform with extendable central frame, extendable by around 2,000 mm, lockable in 500 mm increments pneumatically - Frame with 80x80 mm step at and after extension joint - Reinforced frame design / maximum point load when retracted at center of gravity - Without extendible load platform outriggers, but pre-fabricated to allow retrofit (= guide tubes welded in frame) - With excavator trough (no cover), approx. 220 mm deep, 600 mm wide, starting behind 2nd axle to vehicle end - 1 pair of wheel wells between 1st and 2nd axles, covered with steel plates (covers with Körapur coating), approx. 400 mm deep - Rear underrun protection = extended rear plate - Drop-down supports at the rear Ramps: - 2 two-piece loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting device (only with electro-hydraulic unit) - Width approx. 800 mm - Wooden surfacing - Including anti-slip strips on ramps - Can be locked in transport position with tie-down straps - Operated by control lever mounted on rear right in frame - Hydraulically laterally adjustable Floor: - 35 mm larch wood floor with aluminium omega profiles Landing legs: - Mechanical 24-ton landing legs with single-sided operation and compensating device Axles, steering and tires: - BPW air suspension axles, each with 10-ton axle load, air bellows diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering system with total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired through EBS), automatic control, with manual override button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock Bdjdsxgm S Dopfx Al Hjb - 12 steel disc wheels, 10-hole, center offset by center bore - 12 tires, 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring system Accessories: - Insertable side and rear stakeboards on the swan neck, approx. 400 mm high - Spare wheel carrier - Side aluminium underrun protection - 4 chocks - 1 plug-in ECE rear warning board - 11 pairs of ZK modules 10t, lateral: - 2x on the swan neck - 2x on loading area before extension - 7x after extension - Extendable warning signs including 3 position lamps each, at the front on landing legs and rear before the rear plate, steplessly extendable up to 4,500 mm loading width - 4 plug-in sockets for warning signs in stake pockets on the loading platform - 6 pairs of stake pockets laterally for 100x50 mm stakes - 2 cross rows stake pockets for 100x50 mm stakes on swan neck, from outer frame to main frame (1x before/1x after king pin positions) - 3 cross rows stake pockets for 100x50 mm stakes on loading area from outer frame to main frame (1x before the extension, 1x after extension, 1x after the 3rd axle) - 2 pairs of steel plates in the loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted on underrun protection

Stanje: novo, lastna masa: 9.400 kg, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, obratovalna teža: 9.400 kg, Oprema: ABS, Chassis: - Robust welded steel frame construction with a front frame depression and flat loading platform, rear taper approx. 500x100 mm - Gooseneck height 200 mm with beveled corners at the front - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on the outer frame in the area of the rear bevel) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outward, punch-hole design - Loading platform with extendable central frame, can be extended approx. 2,000 mm in increments of 500 mm, pneumatically lockable - Step 80x80 mm in the frame before and after the division - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting approx. after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended rear plate - Drop leg supports at the rear Ramps: - 2 single-piece aluminum ramps, special version with spring-assisted lifting - Length x width approx. 2,500 mm x 600 mm - Lockable in transit position with lashing straps - Manually adjustable sideways Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with a total lift of approx. 200 mm - 2nd ride height via ball valve +50 mm - 1st axle as lift axle (wired via EBS), fully automatic activation with manual emergency actuation via button on semi-trailer - 3rd axle as self-steering trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, center-offset - 12 tyres 245/70 R 17.5 143/141J, tubeless - Tyre pressure monitoring included Floor: - 35 mm larch wood floor with aluminum omega profiles Bdedpfxexnym Dj Al Heb Landing Gear: - Mechanical 24 t landing gear with single-side operation and compensating support Paintwork: - Steel grit-blasted, spray-galvanized chassis and primed - Chassis/wheel hubs/outer frame painted in DB 7350 Novagrey - Reflective side and rear stripes in yellow Accessories: - Plug-in side and rear panels on gooseneck, approx. 400 mm high - Spare wheel holder - Lateral aluminum underrun protection - 4 chocks with holders - Elongated license plate holder in rear plate - 1 ECE panel at the rear, plug-in - 11 pairs ZK modules 10t, side-mounted: - 2x on gooseneck - 2x on loading platform before extension - 7x after extension - Extendable warning signs incl. 3 position lights each, at front landing gear and before rear plate, infinitely extendable up to load width 4,500 mm - 4 holders for warning signs, plug-in to stake pockets on loading platform - 6 pairs of lateral stake pockets for 100x50 mm plug-in stakes - 2 cross rows of stake pockets for 100x50 mm plug-in stakes on gooseneck from outer frame inwards to main frame (1x before and 1x after king pin positions) - 3 cross rows of stake pockets for 100x50 mm plug-in stakes on loading platform from outer frame inwards to main frame (1x before extension, 1x after extension and 1x after 3rd axle) - 2 pairs of steel plates in loading platform for container locks to accommodate 1x 20ft container - Rubber apron mounted to underrun protection

Stanje: rabljeno, lastna masa: 4.200 kg, največja dovoljena obremenitev: 13.800 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2009, naslednji pregled (TÜV): 05/2020, dolžina tovornega prostora: 7.100 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 385/65R22.5, barva: bela, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable steering, air suspension, lifting/lowering function, ABS (anti-lock braking system), lashing rings, underrun protection, extendable drawbar, side aluminium side guard, storage box, pendulum tailgates Bodpfxeupidhj Al Hedb Body: 2-axle flatbed trailer with forklift mounting, 2 x 9t BPW axles, disc brakes, 25 mm aluminium hollow-section profiles, equipment for truck-mounted forklift, extendable tow bar, lashing rings on the outer frame! Tyres approx. 80-90% tread remaining! ACCESSORIES INFORMATION NON-BINDING, subject to change and prior sale, errors excepted!

Stanje: rabljeno, lastna masa: 10.000 kg, največja dovoljena obremenitev: 39.000 kg, skupna masa: 49.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R 17,5, barva: siv, Oprema: ABS, dvižna zadnja plošča, For every used semi-trailer, you receive a current and comprehensive inspection and functionality report. Chassis: - Sturdy steel frame weldment with front frame camber and level loading platform, rear tapered edge approx. 500x100 mm - Neck 200 mm with beveled front corners - Tapered end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) - 2 king pin positions with replaceable 2" king pin - Outer frame closed outwards as a hole-type external frame - Load deck with extendable center frame, extendable by approx. 2,000 mm, lockable pneumatically every 500 mm - Frame in front of and behind the division with 80x80 mm step - Reinforced frame version / point load in retracted position at center of gravity - With excavator trough (without covering), approx. 220 mm deep, approx. 600 mm wide, starting after 2nd axle to end of vehicle - 1 pair wheel recesses between 1st and 2nd axle with steel covers (covers with Körapur coating), depth approx. 400 mm Ramps: - 2 pieces 2-part loading ramps, special design with mechanical extension - Length approx. 2,850 mm plus 1,850 mm, with hydraulic ramp lifting unit (only in combination with electro-hydraulic unit) - Width approx. 800 mm - Wood covering - Incl. traction ribs on loading ramps - Lockable in transport position with lashing straps - Operation by control lever mounted at rear right in frame - Laterally hydraulically adjustable Flooring: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering and Tyres: - BPW air suspension axles, each with 10 t axle load, air bag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lift and lowering device with total lift approx. 200 mm - 2nd driving height via ball valve +50 mm - 1st axle liftable (wired via EBS), automatic activation with mechanical emergency operation via button on trailer Bdjdpfexxl E Hjx Al Heb - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, centrally aligned offset - 12 tyres, 245/70 R 17.5 143/141J, tubeless - Incl. tyre pressure monitoring Accessories: - Plug-in side and rear boards on the gooseneck, approx. 400 mm high - Spare wheel carrier - Lateral aluminum underrun protection - 4 wheel chocks with holders - Long license plate holder on end cross member - 1 ECE sign insertable at rear - 11 pairs of 10t lashing modules on the side: - 2x on the gooseneck - 2x on the deck before extension - 7x after extension - Pull-out warning signs incl. 3 position lamps each, front at landing gear and rear before end cross member, continuously extendable up to deck width of 4,500 mm - 4 mountings for warning signs to be inserted into stake pockets on the deck - 6 pairs of stake pockets on the side for plug-in stakes 100x50 mm - 2 rows of crosswise stake pockets for plug-in stakes 100x50 mm on the gooseneck from outer frame inwards to main frame (1x before, 1x after king pin positions) - 3 rows of crosswise stake pockets for plug-in stakes 100x50 mm on deck from outer frame inwards to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the load deck for container locks to accommodate 1x 20ft container

Stanje: rabljeno, lastna masa: 3.574 kg, največja dovoljena obremenitev: 14.426 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2000, vzmetenje: zrak, velikost pnevmatike: 265/70R19,5 143/141J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 265/70R19,5 143/141J, velikost zadnje pnevmatike: 265/70R19,5 143/141J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, zadaj s preklopno zaščito proti podvozu, -- pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, več podatkov na zahtevo!, Več podrobnosti: ! Bdsdey Irv Hopfx Al Hsb

Stanje: rabljeno, največja dovoljena obremenitev: 56.200 kg, skupna masa: 69.800 kg, konfiguracija osi: 3 osi, prva registracija: 10/2021, dolžina tovornega prostora: 12.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.625 mm, Leto izdelave: 2021, Oprema: ABS, FYAMONVILLE 4(2+2)-axle MULTIMAX low loader semi-trailer, air-suspended, with 2 self-steering trailing axles Type: Multi-N-4(2+2)L-AUM-18AT-8.80-17.5-2.54-RM German trailer, 1st owner 4.1 m telescopic extension, fully hydraulic ramps and supports, wheel recesses, extensions, ALLOY WHEELS, FULL EQUIPMENT!!! Gooseneck: Gooseneck SNT design approx. 3.7 m, bevel approx. 1,000 mm x 10° Loading platform: Telescopic loading platform, approx. 8.8 m long, ramped at approx. 500 mm x 10° Excavator dipper recess approx. 2,490 x 750 x 210 mm Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be hydraulically shifted approx. 235 mm outward and approx. 215 mm inward individually Axles and suspension: 4x BPW axles 12 t, 2 fixed, 2 trailing, self-steering axles Electromagnetic reverse gear lock + manual operation Air suspension with raise/lower valve Tyres: 235/75 R17.5 3PMSF MICHELIN / PIRELLI Load index: 143/141J (144/144F), new spare wheel 16x ALLOY WHEELS, POWDER-COATED WABCO brake system, EBS-E EU regulations 24-volt lighting system by ASPÖCK-NORDIK ASPÖCK-UNIBOX sockets: 24N, 24S & 15-pin PAINTWORK Standard HRM metallization of outer frame Complete steel structure shot-blasted, ARC-ZINCED ZINACOR 850 (Zinc 85% - Alu 15%) hot finished Steel structure: Steel grades: * S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) * Welders certified to DIN-EN 287-1 * Welding process MAG according to EN ISO 4063 * Shielding gas M21 according to EN ISO 14175 Accessories: * Removable steel front wall, approx. 400 mm high * NATO socket + spiral cable * 3 kW electro-hydraulic power unit for hydraulic functions * Spare wheel bracket on the front wall * Mounting holes for bolt-on lashing rings * First hole approx. 200 mm from the front, then approx. every 400 mm * 2 pairs of screw-in lashing rings (LC 5,000 daN) * Mounting hole at the upper rear of the outer longitudinal member * 1 pair screw-in lashing rings (LC 10,000 daN) * Gooseneck with approx. 40 mm thick hardwood flooring * 1 pair removable aluminum side boards, aluminum rear board approx. 400 mm high, anodized * 2" kingpin * Guide plate on the gooseneck for the fifth wheel plate approx. 500 mm wide * 4 wheel chocks with bracket * Receptacles for ALU approach ramps * JOST mech. landing gear with 2-speed gearbox and crank Bdjdpsy Iq Arjfx Al Hob * Continuous hardwood flooring, approx. 50 mm thick, interrupted between axles * Platform lock with conically welded locking profiles, 250 mm incl. pretension plate * Slots for insertable and repositionable bridging elements at the front of the platform * 1 intermediate table with offset platform, approx. 300 mm wide for the sliding tube * Front and rear with slots for insertable and repositionable bridging elements * Removable cover flush with the loading platform * Extensions extendable by approx. 230 mm per side * 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm, in platform before 1st axle * Wheel recess covers split lengthwise, with wooden overlay, secured externally with locking pins * Wheel recesses with steel covering and 15 x 15 mm square climbing bars approx. every 200 mm * Between the 2nd and 3rd axle, in the platform, one pair of fixed wheel recesses * Rubber flooring "Super Grip" 25 mm and steel covering approx. 5 mm as additional reinforcement on the ramped section of the platform * Control valves for hydraulic ramps on the right an...

Stanje: novo, skupna masa: 20.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading platform total length approx. 8,800 mm, low bed approx. 6,600 mm long, loaded height approx. 890 mm, 24 lashing rings each rated at 10 t, 12 stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, loading ramps laterally adjustable, wooden floor 68 mm thick, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, revolving warning beacon, vehicle fully hot-dip galvanized, -- misprints, errors and subject to change, sample images --, more data at: !, more details: ! Bdjdpfx Alsy Igxvs Hob

Stanje: rabljeno, lastna masa: 2.575 kg, največja dovoljena obremenitev: 15.425 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2015, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65 R 22,5, velikost zadnje pnevmatike: 385/65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Bdodpsy Igvnofx Al Hsb

Stanje: novo, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.600 mm, širina tovornega prostora: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Loading height approx. 980 mm, 20 lashing rings, each 6 t, 20 lashing brackets, each 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, detachable, price: €1,500, surcharge for extendable drawbar, price: €1,500, surcharge for 4 warning signs with lighting, price: €800. Also available with 8,600 mm loading platform length! Errors, misprints, and changes excepted. Sample images. More data at: ! More details: ! Bsdpfxjy Igxpj Al Hsdb