Müller-Mitteltal 11,9 To. Tand-Tiefl. / Einschubrampen Verzinkt nakup rabljenega (34.813)

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear Ijdpfx Agol Thy Re Ioat * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye Isdpfx Agsl Tilxj Ijat ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit Iedpfxepk D D Ue Ag Ieat ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: Iedpjpk D Dmofx Ag Ioat * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles Iedoq Ra D Espfx Ag Ioat ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic quarter mudguards * Plastic toolbox, front right, mounted externally on bulkhead ----Electrics / Lighting: * TPMS Tire Pressure Monitoring System * LED lighting ----Loading Platform: * Loading length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Hinged, trapezoidal-profile steel side panels with drop-side spring assist * Removable steel rear wall, can be stowed in front of the bulkhead between ramp mounts * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the bulkhead and end beam for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-up ramps with spring mechanism, single-operator use, approx. 2,750 x 600 mm (collapsible down to 20 mm) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions, and drive-up ramps * Side panels painted in RAL 9010 pure white * Painting of side walls in an individual RAL color available for a surcharge ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available from CW

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ-TA-R 11.9: ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flanged Drawbar Eye: * Height-adjustable drawbar by 300 mm * 40 mm flanged drawbar eye ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding rear supports * Plastic quarter mudguards * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting ----Loading Area: * Loading platform length: 6.27 m * Suitable for container transport * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal profile steel, foldable with drop side spring lifter * Steel tailgate, insertable between ramp holders; stowable inside in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Each front and rear corner fitted with 1 x 6.3 t lashing point * Various holes in bulkhead and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical drive-on ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm height) * Rear approach angle approx. 860 mm ----Tyres: * Tyres: 235/75R17.5 Iaedsrvvfwopfx Ag Iot ----Wheelbase: * Wheelbase: 990 mm ----Paint Finish: * Hot-dip galvanized chassis, drawbar, bulkhead, tailgate, rear stanchions, and ramps * Sideboard paint finish in RAL 9010 pure white * Painting of side walls in another RAL color possible at extra cost ----Information: * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Availability: * Available from CW (calendar week)

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection Iaodpfx Asmi Tmasg Ist * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing gear, front * External folding supports, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped * Preparation in front of front wall for subsequent installation of container locks * Bolted front wall, smooth sheet * Split side walls, steel sheet, trapezoidal profile—foldable with central folding stakes * Steel rear wall, sliding between ramps—holder inside front wall when not in use * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing rings every 600 mm * Load securing package: Each front and rear corner 1 x 10 t UVV lashing ring, each side 2 x 8 t UVV retractable lashing rings in outer frame; in front and end crossmember various bores for 1.2 t lashing options ----Ramps: Ijdpfx Agemi Tcqo Ieat * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach slope approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75 R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air reservoirs, flange eye, and landing gear painted black--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear front * Rear external folding supports * Plastic toolbox front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood flooring * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach incline approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Drop-sides painted in RAL2011 deep orange * Painting of the side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty Ijdel Th Nrepfx Ag Ieat * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Platform length 5.37 m * 50 mm softwood floor * Bolted smooth sheet steel front wall * Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring * Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * In each corner front and rear, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, loading ramps galvanized * Axles, springs, air tanks, 40 mm flange towing eye painted in black * Board walls painted in RAL2011 deep orange * Side panels available in other RAL colors at extra cost ----Information: * New vehicle with manufacturer warranty Iasdpfxol Th Ncs Ag Ijt * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: Iaedpstr Sucofx Ag Ist * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: Iaedpfxjtr St Ue Ag Ist * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear Ijdox Ipapopfx Ag Ieat * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4 ----Brake System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Iodpfx Agex Ipbaj Isat * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange-type towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * 15-pin electrical connector * LED rear lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation in front of the bulkhead for later installation of container locks * Bolted smooth steel bulkhead * Foldable steel side walls with trapezoidal profile, with drop-side spring assist * Removable steel rear wall, stowable inside at the front of the bulkhead when not in use * Bolted rear stanchions * Rear ramp bevel approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drillings in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness) ----Paint Finish: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tanks, and flange eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available ex Eggerstorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes Iodpfx Agopk D Dqj Ieat ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Braking System: * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * Gigant axles Iaedpfx Aendpn Seg Iot ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Towing Eye: * Drawbar height-adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system with indicator function in the truck via EBS signal—no installation required on the truck side) * LED lighting system * 15-pin electrical connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floorboards * Preparation for subsequent installation of 20" container locks at front and rear * Bolted, smooth sheet metal front wall * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Hot-dip galvanized bolt-on rear stanchions ----Load Securing: * Perforated outer frame, angled at approx. 45 degrees, with 2 t lashing points every 480 mm * Option for 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in front and end crossmembers for 1.2 t securing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, stored in a compartment underneath the loading area in the chassis, accessible from the rear ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Entire vehicle hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Approx. 300 mm height-adjustable drawbar with 40 mm flange eye ----General Fittings: * Jost mechanical landing gear at front Iaedpfx Agsl Thyxs Ist * Rear: 2 mechanical, hot-dip galvanized drop-down support legs * Plastic toolbox approx. 750 x 350 x 300 mm, fitted on right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking fixtures, plus 2 at the front wall * Steel pallet, 3-way tipping body (continuous sidewalls – without center stanchions – foldable with drop side spring assistance) * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, can be swung open and locked at 270°, not foldable – with additional pendulum frame for automatic tailgate opening during tipping operation; locking via galvanized swing bolt locking and central locking system * Deactivation function for automatic rear wall opening when tipping backwards with open door * 4 mm steel floor plate * Rear ramp carrier rail for drive-on ramps ----Load Securing: * 1 x 5 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, fitted in the outer frame ----Ramps: * 1 pair of aluminum drive-on ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for vehicles on rubber tires & tracks * Lockable storage compartment for ramps under the loading platform, integrated into the chassis ----Paint Finish: * Drawbar, front wall, tipping platform, rear stanchions, underrun protection, and mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Sidewall painting in any RAL color available at extra charge * Axles, springs, flange eye, air tank, and landing gear painted in a black tone ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex-works Egestorf on A7

Stanje: novo, največja dovoljena obremenitev: 8.850 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes Iaedpfjl Thymex Ag Iet ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem load equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment range) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, on the right-hand side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS tire pressure monitoring system ----Tipper Body: * Net hooks at sides and rear in the central locking compartments, as well as 2 units on the front wall * Steel palletized 3-way tipper body (continuous side walls—without central stanchions—foldable with board spring-lifter) * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically divided, can be opened and locked at 270°, not foldable—with additional swinging frame for automatic rear tailgate opening during tipping process; locking via galvanized locking rods and central locking * Deactivation function for automatic rear tailgate operation when tipping backwards with open wing door * 4 mm steel chequer plate floor * Rear mounting rail for loading ramps ----Load Securing: * One 5 t lashing ring per corner * Four 3 t lashing rings each side, recessed into the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable rear storage compartment beneath the loading area, integrated into the chassis ----Paintwork: * Drawbar, front wall, tipper body, rear stanchions, underrun protection, and mechanical supports hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall painting in other RAL color shades available for an additional charge * Axles, springs, flange eye, air tanks, and landing gear painted in black ----Information: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle, without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex works Egestorf on the A7 Motorway

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device Isdpfxorwc R Ro Ag Isat ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: Isdpfxorwc R As Ag Isat * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake chambers * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Towing Eye: Iajdpfx Ageq Euago Ijt * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * Multivoltage * 15-pin power connector * 12V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at front * Rear: 2 mechanical foldable supports * Plastic toolbox, right side * 2-step access step, front left (in direction of travel) * Bolt-on underrun protection * Plastic quarter mudguards ----Tipping Platform: * Mesh hooks on the sides and rear in the central locking mounts, plus 2 on the front wall * Steel pallet, 3-way tipper body (continuous side walls - without central stanchions - foldable with side wall spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel plate floor * Rear mounting rail for loading ramps ----Load Securing: * 1 x 5 t lashing ring in each corner * Plus 4 x 3 t recessed lashing points per side in the outer frame ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated in the chassis ----Tyres: * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipper body, front wall, foldable supports, and rear stanchions hot dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in a shade of black * Side boards painted in RAL color of your choice (excluding special or metallic paint); color can be changed up to approx. 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.650 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm, with 40 mm flange towing eye ----Electrics / Lighting: * RDÜ tyre pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin supplementary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox mounted on the right side * Two-step access ladder, front left in direction of travel * Bolt-on underrun protection * Plastic quarter mudguards ----Tipper Body: Iaodpjl Thw Ijfx Ag Ijt * Mesh hooks on the sides and rear at the central locking bearings, plus 2 pieces at the front wall * Steel pallet—3-way tipper body (continuous side panels—no centre stanchions—fold-down with side panel spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing rings per side in the outer frame ----Ramps: * 1 pair of aluminium ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment beneath the loading area integrated into the chassis at the rear ----Tyres: * Tyres 385/55 R 19.5 ----Paint: * Chassis, drawbar, tipper body, front wall, folding supports, and rear stanchions hot-dip galvanised * Axles, springs, air tanks, flange towing eye, and support winch painted in black tone * Sideboard paintwork in preferred RAL colour shade (excluding special or metallic paints), changeable up to 6 weeks before completion ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to prior sale and errors excepted * Sample images ----Delivery Time: * available from approx. week 28 / 2026

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable hot-dip galvanized drawbar, +/- 150 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin power socket * LED tail lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear (front) * 2 x rear externally mounted drop-down supports * Enclosed single plastic mudguards * Folding "A" sign at the rear * Plastic underride guard buffers * Hot-dip galvanized protective underrun bar with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Includes 2 permanently mounted ratchet tensioners on the outer frame with chain box * Equalizing chain on both sides with eye and quick shortener, Y-special version, 6.3 t ----Skip Stops: * 2 interchangeable skip stops for lateral centering of skips * Front skip stops with swing-mounted stop, plug-in at 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Lashing force with load securing certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery Time: Iedpspk Dyxefx Ag Ioat * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 12.200 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: ----Braking System: * Wabco EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm Iaedpfx Aol Thyqog Ist * 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * LED rear lights * RDÜ tire pressure monitoring system ----General Attachments: * Jost landing gear at the front * 2 x external drop supports at the rear * Closed plastic single mudguards * Folding "A" plate at the rear * Plastic underrun protection buffer * Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right ----Load Securing: * Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements ----Skip Stops: * 2 removable skip stops for sideways centering of skips * Front skip stops with swiveling stop, pluggable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Subject to errors and prior sale * New vehicle with manufacturer warranty ----Delivery time: * Available immediately ex Egestorf

Stanje: rabljeno, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 02/2021, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, Müller-Mitteltal nizkopodni kesonski priklopnik - Nizkopodni in dvosmerni kesonski priklopnik v enem vozilu - Vlečno uho 40 mm - Pnevmatski zavorni sistem - Podporna stojala za nakladanje in razkladanje Iaedpfxsyk Rfko Ag Iot - Gigant osi - Pnevmatske gume: 235/75 R 17,5 - Bobnaste zavore - Lastna teža: 3.620 kg - Nastavljiva višina drogov - TÜV veljaven do: 08.2026 - SP veljaven do: 02.2026 - SP veljaven do: - Dolžina tovornega prostora: 4.800 mm - Širina tovornega prostora: 2.430 mm - Višina stranic: 0,5 m Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 11349.