Faymonville Multimax Stn-4Ubx nakup rabljenega (1.521)

Stanje: rabljeno, največja dovoljena obremenitev: 28.200 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2012, Proizvajalec: Faymonville Tip: Multimax STN-4UBX Leto izdelave: 2012 Vrsta izdelka: Rabljeno Podatki: Prva registracija: 27.02.2012 Skupne mere D x Š x V: 13,65 x 2,55 x 4 m Lastna teža: 11.800 kg Dovoljena skupna masa: 40.000 kg Nosilnost: 28.200 kg Število osi: 4 Posebnosti: Prisilno vodena zadnja os, hidravlično dvižno ležišče do gosi vrat Pgedpfx Aasyt Udiopok Opomba: Lokacija: Essen Takoj na voljo

Stanje: rabljeno, največja dovoljena obremenitev: 40.800 kg, skupna masa: 53.800 kg, konfiguracija osi: 3 osi, prva registracija: 11/2012, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Faymonville 4-osovinski Multimax STN-4AX niskopodni teleskopski poluprikolica Godina proizvodnje: 11.2012 Tara: 13.000 kg Dozvoljena ukupna masa: 53.800 kg Tehnički dozvoljena masa: 55.400 kg Nosivost: 40.800 kg Podpritisna sila: 25.000 kg Dimenzije guma: 205.65R17,5 3. i 4. osovina – prinudno upravljane 4x SAF osovine 7.600 kg sa vazdušnim ogibljenjem Dužina: 13.475 mm do 20.275 mm (izvlačiva) Širina: 2540 mm do 2620 mm Visina: 1200 mm ! Dodatne informacije na zahtev putem e-maila ! Podaci su informativni i bez garancije na tačnost! Informacije dostupne na internetu su neobavezujući opisi i ne predstavljaju zagarantovane karakteristike. Prodavac ne odgovara za greške, tipografske greške ili greške u prenosu podataka. Zadržavamo pravo na izmene. Pjdpfx Aju Aynleapsgk Stalan otkup i prodaja, kao i zamena i iznajmljivanje dizalica i podiznih vozila, kao i građevinskih i teških vozila.

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: Pgsdeyhkrlopfx Aapok * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high Pgedsy Auh Ispfx Aapsk * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment: Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear chamfer * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized * 1 LED work light mounted top left and right on the front wall, wired to the connection strip for the tractor LOADING AREA: * Loading area approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface with 5 mm steel plate reinforcement on lifting bed and loading area, rated for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered * 3rd axle with electromagnetic reverse lock, can be activated by reverse gear or manually * 1st axle with start-up aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edge of the ramp tips, switch located next to ramp control * Ramp locking in driving position via quick-release * Sand coating painted on external frame of the ramp and on the ramp tip * Mechanical lateral drop leg supports in the ramps for docking to unloading ramps * Hydraulic ramp control valves on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Wheels silver grey * Sideboards natural aluminium * Wheel hubs according to axle manufacturer * Light panel pure white (RAL 9010) Pgedpfjy Auhhex Aapek EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connection strip for supply lines to the tractor, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain attachment points on inner left/right of the front wall, incl. Alu tray underneath left/right for storing chains or straps * Behind the front wall screwed-on DELIGNIT panel (approx. 12 mm thick) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope presser roller * Deflection pulley for winch with shackle and bolted lashing point

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2011, dolžina tovornega prostora: 9.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, skupna dolžina: 12.700 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, barva: modra, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Accessories = - Lift axle = Remarks = SAF axle with drum brakes. 1 x lift axle. 1 x self-steering/trailing steering axle. = Further Information = Pjdpfx Asy Daxzjapsgk Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tread depth left inside: 40%; Tread depth left outside: 40%; Tread depth right inside: 40%; Tread depth right outside: 40% Rear axle 2: Twin tyres; Tread depth left inside: 70%; Tread depth left outside: 70%; Tread depth right inside: 70%; Tread depth right outside: 70% Rear axle 3: Twin tyres; Steered; Tread depth left inside: 50%; Tread depth left outside: 50%; Tread depth right inside: 50%; Tread depth right outside: 50% Weights Unladen weight: 10,500 kg Payload: 44,500 kg Gross vehicle weight: 55,000 kg Identification Type number: STN-3U / HYDRAULIC RAMP / LIFT A = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information but no rights can be derived from the texts provided.

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Pjdpfxorvw U Sj Aapsgk Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 8.000 kg, dovoljena osna obremenitev (os 2): 8.000 kg, dovoljena osna obremenitev (os 3): 8.000 kg, prva registracija: 11/2017, skupna dolžina: 135.000 mm, skupna širina: 2.540 mm, skupna višina: 780 mm, barva: črn, Leto izdelave: 2017, Oprema: ABS, = Dodatne možnosti in oprema = - Zračno vzmetenje = Dodatne informacije = Konfiguracija osi Zadnja os 1: Največja osna obremenitev: 8000 kg Pgsdeyx Hwyspfx Aapjk Zadnja os 2: Največja osna obremenitev: 8000 kg; Krmiljena Zadnja os 3: Največja osna obremenitev: 8000 kg; Krmiljena Zadnja os 4: Največja osna obremenitev: 8000 kg; Krmiljena Teže Lastna teža: 14.800 kg Nosilnost: 42.200 kg Skupna dovoljena masa: 57.000 kg Stanje Tehnično stanje: dobro Optično stanje: dobro Poškodbe: nobenih Finančne informacije Cena: Na zahtevo Dodatne informacije Za več informacij se obrnite na David F Middelman.

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: Pjdpfx Aajxarmaspjgk * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: rabljeno, skupna masa: 42.000 kg, prva registracija: 06/2013, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Proizvajalec: Faymonville Tip: Euromax Leto izdelave: 2013 Vrsta izdelka: Rabljeno Psdpoyr Uyzofx Aapogk Podatki: Prva registracija: 13.06.2013 Skupne mere D x Š x V: 13,50 x 2,55 x 4 m Dovoljena skupna masa: 42.000 kg Lastna masa: 10.900 kg Lokacija: 45143 Essen takoj na voljo

Stanje: rabljeno, skupna masa: 42.000 kg, prva registracija: 04/2013, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Proizvajalec: Faymonville Tip: Euromax Leto izdelave: 2013 Vrsta izdelka: Rabljeno Podatki: Pgjdpfx Ajyr Uy Ioapsk Prva registracija: 17.04.2013 Skupne dimenzije D x Š x V: 13,50 x 2,55 x 4 m Dovoljena skupna masa: 42.000 kg Lastna masa: 10.900 kg Lokacija: 45143 Essen takoj na voljo

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Psdpfx Aaoxxkqzopsgk Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted.

Stanje: rabljeno, konfiguracija osi: 3 osi, barva: siv, Leto izdelave: 2005, Faymonville TL STN 3AU Zračno vzmetenje 2 podpori Hidravlične rampe Raztegljiv Vitel Pedpfoydbd Djx Aapsgk Dovoljeno skupno težo 34.000 kg = Dodatne informacije = Lastna teža: 12.130 kg Nosilnost: 21.870 kg Dovoljeno skupno težo (DGV): 34.000 kg

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. Pgjdpfeyhkqusx Aapok - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Pgodpjwta Aljfx Aapjk Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa Pgjdpfsx I Uyhsx Aapjk WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered Podsrgzv Nspfx Aapegk * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks Pgedpfxetx Nwno Aapok * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) Pgjdpfxoxtc Uhj Aapek - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 20.000 kg, največja dovoljena obremenitev: 120.000 kg, konfiguracija osi: 3 osi, stanje pnevmatik: 70 odstotek, barva: rdeča, Leto izdelave: 2006, 3 dvižne in krmilne osi. Hidravlično vzmetenje. Višinsko nastavljiv vrat. Psdeyaaz Hepfx Aapjgk Pomožni bencinski motor Hartz. Neodvisno brezžično krmiljenje. Hidravlične zadnje rampe za strojno obremenitev do 70 ton.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: YAFTL409100010512, Leto izdelave: 2010, For sale: Faymonville 4-axle semi-trailer (year 2010), extendable, in like-new condition. The vehicle has undergone a complete major overhaul performed by a specialized workshop and is ready for immediate use without any further interventions required. ✅ ADVANCED STEERING SYSTEM: Equipped with permanent hydraulic steering active both when driving forward and in reverse. Includes a wired remote control for manual axle steering during maneuvers. ✅ COMPLETE SANDBLASTING AND PAINTING: Chassis restored to as-new condition and fully protected. ✅ NEW DECKING: All floor boards and inserts have been newly replaced, never loaded since restoration. ✅ FULL MAINTENANCE: Mechanics, brakes, and hydraulic systems (ramps and steering) overhauled. ✅ READY FOR WORK: No further investment necessary, with routine inspection carried out as of 27/02/2026. Podpjy Ecltsfx Aapsgk TECHNICAL SPECIFICATIONS: Axles: 4 (1st liftable / 2nd-3rd-4th steering). Extendable: Single extension (+7.20 m). Total length up to 21 meters. Payload: 25,600 kg. Accessories: Double hydraulic ramps, front winch.

Stanje: rabljeno, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2000, B= 12000 mm Teža praznog vozila 11300 kg Pgsdpfxey Hgh Uo Aapjk STZ-V-labudova vrata pomerajuće unapred za utovar sa prednje strane zamenjiv 2" - čep/kraljevski zatik ugrađen hidromehanički sistem upravljanja hidraulična funkcija podizanja i spuštanja, uključujući cilindar za oslonac projektovano za tehničko opterećenje sedla do 18 tona aluminijumske bočne stranice, sa sve četiri strane radijus zakretanja 2400 mm Most platforme sa niskim ležajem dužina ravnog dela 5.000 mm, teleskopski produživa za 2.300 mm širina ravnog dela 2.550 mm visina konstrukcije 280 mm napred kukice za spajanje sa STZ-V-labudovim vratima 2 klinaste rampe za uspon na prednjem delu mosta sa niskim ležajem visina utovara oko 450 mm 3-osovinski trap zračno ogibljenje (DxŠ) cca 4.500 x 2.550 mm, uključujući ventil za podizanje i spuštanje, sa 3 prinudno upravljane osovine, Proizvođač: SAF, međuosovinski razmak 2x 1.310 mm Visine vožnje 970 mm Kočioni sistem dvocevni, pneumatski kočioni sistem na sve točkove preklopive proširenja u niskom ležaju visina sedla pod teretom: 1.250 mm sve 3 osovine hidraulički prinudno upravljane sa funkcijom naknadnog upravljanja

Stanje: rabljeno, lastna masa: 11.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 700 mm, prostornina tovornega prostora: 23 m³, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2018, vrsta prenosa: mehanski, Oprema: ABS, Lastna masa: 11.550 kg, dovoljena skupna masa: 42.000 kg, tovorni prostor (D Š V): 13.450 mm x 2.540 mm x 700 mm, volumen tovornega prostora: 23 m³, zračno vzmetenje, dvižna os: 1. os, elektronski zavorni sistem EBS, sledilno krmiljenje: 3. os, dvojna montaža pnevmatik, minimalna dolžina 13,45 m, maksimalna dolžina 18,20 m, lastna masa 11.550 kg, obremenitev sedla 18.000 kg, skupna masa 48.000 kg, izjemno dovoljenje DE, izvlečno, hidravlične nastavljive rampe, 3. os prisilno vodena, dvojne pnevmatike 235/75R17,5, vitel, tehnični pregled do 01-2027, YAMT13XXXJ0102830, Nezavezujoča ponudba, napake in vmesna prodaja pridržane. Slika ni nujno enaka ponudbi. Pgodjy Dng Topfx Aapok

Stanje: rabljeno, skupna masa: 39.500 kg, konfiguracija osi: 3 osi, prva registracija: 07/2022, dolžina tovornega prostora: 13.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, Leto izdelave: 2022, Oprema: ABS, lfd 12389 LOW-LOADER MAX TRAILER 3-axle F-S43-1AAF / EXTENDABLE 4500 mm / STEERED AXLE Make/Manufacturer: MAX TRAILERS First registration: 07/2022 Dimensions: 13,400 x 2,540 x 890 mm Gross vehicle weight: 49,500 kg Unladen weight: 10,284 kg Payload: approx. 38,000 kg Kingpin load: 18,000 kg Podpfx Ajy Ag Adsapogk Air suspension with raise/lower function Drum brakes ABS EBS Mileage: 142,000 km Axle make: BPW 10.5 t Lifting axle Steered axle Trailing steering axle Lash rings Superstructure paint: red Chassis paint: GALVANIZED / RED Tyres: 12 units Tread depth: 7 - 10 mm Rear axle tyres: 235/75 R 17.5 MAX = FAYMONVILLE MAX 100 Ideal for concrete slabs / timber walls / precast concrete components etc. Side extension: 1,200 mm / hardwood floor Rear loading edge: 890 mm Lowered: 840 mm Container locks for: 1 x 40/30 and 20 ft containers Includes 4 x twistlocks Stake pockets + 5 t lashing rings on floor EXTENDABLE by 4,500 mm in 500 mm increments Intermediate table can be removed TRAILING STEERED AXLE ALUMINIUM AIR TANK / HOT-DIP GALVANIZED EXCELLENT CONDITION!!!!! Currently, sample images from 06.2025 All details subject to change, prior sale reserved! If you have any questions regarding this or other vehicles, please call us. If you have any questions about this or another trailer/car, please call us.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: Pgsdpsy Hxd Iofx Aapjk - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063