Kempf Polpriklopnik Z Odprto Ploščato Ploščadjo nakup rabljenega (28.254)

Stanje: novo, lastna masa: 13.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 45.000 kg, konfiguracija osi: 2 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dolžina tovornega prostora: 6.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 300 mm, velikost pnevmatike: 245/70 R 17,5, barva: črn, Oprema: ABS, Gooseneck: - Hydraulically detachable gooseneck with external main frame featuring integrated steering pick-up and individually operated push-off cylinders - Integrated hydraulic cylinders and support arms for coupling and uncoupling the lowbed deck - Piping connections to the lowbed, mounted on the inside of the main frame at the gooseneck kink - Bracket for locking pins Lowbed, extendable: - Frame pre-tensioning adapted for the maximum payload, reduced payload in the telescoped positions - Prepared for the installation of load area wideners - Telescoping stages approx. every 500 mm + container positions - 7 pairs of swivelling lashing rings, 13,400 daN lashing capacity - 5 pairs of stake pockets 100x50 mm in the outer frame - 3 pairs of M36 threaded bushings on the outside of the telescopic frame for screwing in lashing brackets - 1 pair of M36 threaded bushings on the inside of the telescopic frame for screwing in lashing brackets - Prepared for the installation of container locks - Adapter without pin-tab coupling: 2 pairs of 13,400 daN lashing rings welded on the adapter facing the lowbed; 1 pair on the outer adapter; 1 pair on the inner adapter - 45 mm spruce plank flooring between the flatbed frame sections Chassis, drive-over type: - Steel welded construction in compact design with open excavator trough at the rear - Kink to lowbed at 90°, with 2 pairs of holes at the front and rear of the chassis platform for hanging loading ramps using locking pins - Different track widths can be set using 2 different holes - Welded smooth steel floor above the axles with anti-slip coating, max. 5,000 kg axle load - End beam with cutouts for lights, designed as underrun protection according to ECE R58-003 - Valves and electrical distribution protected, installed in the double floor Axles, suspension, and tires: - DOLL tera pendle axle technology with hydraulically suspended GIGANT pendle axles - All axles rated at 12 t, with ABS and AGS (automatic slack adjuster) - All axles hydraulically steered, with max. 60° steering angle on the rearmost axle - Use of low-maintenance bearing points in the steering area - All lubrication points connected to the central lubrication system - Lift axle / jack function, a locking pin is supplied for each axle to allow axle lifting - DOLL tera pendle axle with hydraulic suspension and damping elements - Lifting and lowering device with 600 mm total stroke (-70/+530) - Hydraulic dual-circuit displacement steering system - Steering pick-up at the king pin plate, mounted on a turntable - Transmission of steering angles via a tie rod to the front master cylinders - Rear slave cylinders transfer the front steering angles via solid steering rods to the steering axles - All valves are centrally mounted on a control block - Axle load indicator via manometer on the side - Steering pressure monitoring - Tire pressure monitoring system - Tires: 245/70 R 17.5 Accessories included: Isdpfx Agsy Dqkhe Isat - Steel front wall with spare wheel holder, bolted, 520 mm high, hot-dip galvanized - Side and rear panels, insertable, approx. 400 mm high, anodized - Two central lubrication systems BEKAMAX - DOLL Tronic - CAN-Bus system - Support arms for coupling and uncoupling the lowbed deck - Fifth wheel plate with integrated steering pick-up, steering wedge, and 2'' king pin to accommodate the trailer - Gooseneck cylinders for coupling and uncoupling the lowbed deck - 6-way hydraulic coupling with pressure relief valve for easy disconnection of hydraul

Stanje: novo, največja dovoljena obremenitev: 44.400 kg, skupna masa: 61.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 300 mm, Leto izdelave: 2026, Oprema: ABS, DOLL NEXT DOLL Tiefbett tera T3P-S3FS25 – 3-axle low-bed trailer from the rapidly available rapid series from DOLL Fahrzeugbau GmbH, Oppenau – from the heart of the Black Forest. Ideal for demanding operations in tough off-road conditions, challenging terrain, and for daily use on construction sites. Depending on availability, very fast delivery and ready for immediate deployment thanks to DOLL's rapid series production. Individually configurable according to your requirements and specifications. Technical Data * Permissible gross vehicle weight: 61,000 kg * Unladen weight: approx. 16,600 kg – Payload: approx. 44,400 kg * Running gear: 3x 12t pendulum axles * Extendable low-bed * Vehicle width: 2,550 mm * Loading height (loaded): 300 mm * Wheelbase: 1,360 mm Equipment Features * Detachable gooseneck enables much easier and faster loading and unloading * Smooth telescopic extension for efficient handling * High-quality hot-spray galvanization – for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized accessories – robust and durable – no rust Your Benefits at a Glance * Fast availability * Robust & reliable – proven technology, also ideal in challenging conditions * Made in Germany – manufactured by DOLL Fahrzeugbau, Oppenau – a company with over 145 years' experience in premium vehicle construction Smart Technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The constantly increasing demand for our low-bed semi-trailers drives the continuous further development of state-of-the-art technologies in series production. Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (Headquarters and production site) Ijdpfxsyytnbs Ag Ieat * Depending on the customer's location, vehicles can be demonstrated directly at the factory or at selected reference customers throughout Germany together with a field sales colleague.

Stanje: rabljeno, največja dovoljena obremenitev: 51.556 kg, skupna masa: 66.200 kg, konfiguracija osi: 3 osi, prva registracija: 06/2000, dolžina tovornega prostora: 14.670 mm, širina tovornega prostora: 2.980 mm, skupna širina: 3.000 mm, skupna višina: 3.200 mm, Nizkoposteljna prikolica 10.350 mm, višina nakladanja: cca 900 mm, labodji vrat: 3000 mm, sprednji naklon 440 mm, zadnji naklon: 880 mm, hidravlična nakladalna rampa (DxŠ) 4100x1220 mm, deljena, 7 priveznih ušes na vsaki strani, zaboj za orodje na labodjem vratu, podporni vitli, izvlečne opozorilne table, rotacijska luč, 3. in 4. os hidravlično prisilno vodeni, bobnaste zavore, zračno vzmetenje, vozilo je lahko polepljeno in/ali označeno z oglasom. SI85462 Naša ponudba je praviloma brez novega pregleda TÜV. Če želite nov TÜV pregled, vam lahko naši partnerski servisi pripravijo ponudbo! Vozilo je lahko polepljeno in/ali označeno z oglasom. Veljajo naši splošni pogoji dostave in plačila. Iaodsxrxkispfx Ag Iot Za ta predmet vam lahko pripravimo ponudbo za financiranje ali leasing. Kontaktirajte nas!

Stanje: rabljeno, največja dovoljena obremenitev: 62.950 kg, skupna masa: 91.400 kg, konfiguracija osi: 3 osi, prva registracija: 12/1994, dolžina tovornega prostora: 18.910 mm, širina tovornega prostora: 2.730 mm, skupna širina: 2.750 mm, skupna višina: 3.300 mm, Oprema: ABS, 5-osovinski poluprikolica sa niskom platformom, LANGENDORF DOLLY OSOVINA, odvojivi labudov vrat, tehnički dozvoljena ukupna masa oko 103.500 kg, korito za bager: (D x Š) 8150 x 2750 mm, visoko korito: (D x Š) 7360 x 2730 mm, labudov vrat: (D x Š x V) 3400 x 2460 x 410 mm, ABS, BPW osovina/e, sve osovine hidraulički prisilno upravljane, elektrohidraulično dodatno upravljanje, bubanj kočnice, vazdušno ogibljenje, vozilo može biti oblepljeno i/ili označeno reklamom. Iasdpfx Agek Akcqo Ist

Stanje: rabljeno, največja dovoljena obremenitev: 69.800 kg, skupna masa: 97.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2014, dolžina tovornega prostora: 19.800 mm, skupna širina: 2.750 mm, skupna višina: 2.900 mm, Oprema: ABS, Special low-bed trailer for long and heavy-haul transport. The low-bed deck offers a load area of approx. 7,700 mm, plus an additional 5,300 mm extendable. The low-bed deck can be rotated and converted into a platform (length 15,305 mm—extendable up to 20,605 mm). Loading height as a low-bed is approx. 420 mm; as a platform, the loading height is approx. 800/900 mm. The low-bed deck can be widened up to 3,200 mm. Axles: DOLL panther technology, double wishbone suspension with hydraulic damping, 12,000 kg per axle, fifth-wheel load 25,000 kg. Payload capacity up to approx. 80,000 kg, applicable only at reduced speeds. Dimensions without front dolly axles: length approx. 17,350 mm + 5,300 mm extendable. Unladen weight approx. 21,600 kg. Payload capacity up to approx. 69,650 kg, applicable only at reduced speeds. Current new price approx. EUR 460,000 net. Iaedsyad Rlepfx Ag Iet SI85047 Our offer is generally without a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we are happy to provide a quote in cooperation with our partner workshops! The vehicle may be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We would be pleased to provide a finance or leasing offer for this unit. Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 37.420 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2015, dolžina tovornega prostora: 16.900 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 3.000 mm, Leto izdelave: 2015, Oprema: ABS, HRD SPTM4A Mega Telescopic Semi-Trailer Serial number: W09SPTM4NFEN10031 Isdpfx Agoxzmgwj Ioat First registration: 24-03-2015 SAF axles Lifting axle 2 steering trailing axles Drum brakes with ABS and EBS Air suspension Tyres: 235/75 R17.5, 40% Gross weight: 48,000 kg, tare weight: 10,420 kg, payload: 37,420 kg Total loading length: 1,290 cm + 400 cm extendable Loading floor height: 95 cm Aluminum loading ramps Total trailer length: 13.30 m, width 2.54 m, height 3.00 m Container twist locks for 2x20 ft, 1x40 ft, 1x 20 ft in the middle Lashing rings Stake pockets Subject to errors, omissions, and prior sale.

Stanje: rabljeno, največja dovoljena obremenitev: 24.640 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2009, dolžina tovornega prostora: 12.100 mm, širina tovornega prostora: 3.000 mm, skupna širina: 2.550 mm, Leto izdelave: 2009, Oprema: ABS, Doll T2H-S3 excavator bed low loader with detachable gooseneck First registration, BPW Eco axles Hydraulically steered with radio remote control Air suspension Drum brakes with ABS and EBS Tyres: 245/70 R17.5 approx. 35% Gross weight: 38,000 kg, unladen weight: 13,360 kg, payload: 24,640 kg Maximum deck length: 670 + 540 cm Gooseneck: 405 cm Rear section: 275 cm Ijdpfxeyi Nm De Ag Ioat Width: 255 + 2x30 cm Low bed height: 46 cm Loading height rear: 94 cm Excavator trough. Errors/mistakes and prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 35.450 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.740 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.500 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA_RJ 3 / 1N ? 18/24 | Low Loader | Extendable | Wheel Wells | Ramps | 3 Axles Isdpfxjyrkpxj Ag Ioat Low gooseneck height, small tires! 770 mm loading height Manufacturer: Kässbohrer Model: K.SLA_RJ 3 / 1N ? 18 / 24 Vehicle type: Extendable jumbo low loader with wheel wells Registration country: Germany Year of manufacture: 2026 Color: RAL 3020 Traffic Red ----Technical Data Dimensions * External length: 13,190 mm * Platform length: 9,240 mm * Extension: 3,500 mm * Gooseneck length: 3,950 mm * Platform height: 770 mm * Fifth wheel height: 1,150 mm * Total width: 2,550 mm + 600 mm side extension * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm * Locking position: 500 mm * Rear swing door: 2,300 mm ----Weights * Tare weight: approx. 12,556 kg * Permissible total weight (80 km/h): 48,000 kg * Permissible total weight (60 km/h): 52,800 kg * Axle load: 24,000 kg * Axle capacity: 8,000 kg per axle * King pin load capacity: 15,000 kg ----Chassis / Axles * 3 BPW axles * Air suspension * 2 rigid front axles * 1 trailing rear axle * Lifting axle on 1st axle (load-dependent) * Automatic axle lifting control from tractor unit * Air suspension with load gauge * ECAS electronic air suspension system ----Braking System / Electrics * WABCO EBS 4S/3M * ABS * RSS roll stability support * Electro-pneumatic dual-circuit braking system * Lighting as per ECE R48 * Aspöck lighting system * Sockets: * 24N (ISO 1185) * 24S (ISO 3731) * 15-pin ADR (ISO 12098) ----Wheels / Tires * Tire size: 205/65 R17.5 * 12 wheels * Steel rims * M+S tires * 3PMSF winter tires * Tire pressure monitoring system * Spare wheel holder on front wall ----Chassis / Superstructure * High strength S700 MC steel chassis * 2" king pin (bolted) * Gooseneck with 90° vertical corners * Partial metallization Zn/Al corrosion protection * 45 mm hardwood floor * Tread plate over wheels ----Loading Platform / Extensions * Side extension up to 300 mm * 100x100 box profile pockets * Galvanized steel extensions * Hardwood extension boards (3 × 100 mm) * Storage box for extension boards ----Wheel Wells / Excavator Trough * Wheel wells for vehicle transport * Excavator trough at rear * Width: 750 mm * Depth: 310 mm * Length: 3,000 mm * Wheel well bridges made of hardwood ----Ramps * Foldable drive-on ramps * Ramp capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulic sliding system * Ramp floor made of hardwood * Ramp securing with tension chain ----Load Securing Lashing points: * Gooseneck: 2 × 2 pcs 5 t, 1 × 2 pcs 10 t * Outer platform: 3 × 2 pcs 5 t, 4 × 2 pcs 10 t * Below outer frame: 2 × 2 pcs 8 t * Platform: 4 × 2 pcs 6 t * Further securing: * 5 × 2 stake pockets * 3 × 2 stake row pockets * 8 × 2 plug-in stakes * Container locks for 20 ft / 30 ft containers ----Equipment / Accessories * Toolbox (700 × 400 × 360 mm) * Rotating beacon * Rear work light * Extendable warning panels with LED * Side marking tape * Rear marking tape * Wheel chocks * WABCO Smartboard * Power cable (NATO socket) For further information, please feel free to contact us.

Stanje: novo, največja dovoljena obremenitev: 40.320 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment. Complete specification available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick. Loading area with 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing Gear: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 205/65 R17.5 tyres – manufacturer of our choice TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141 Axles: * BPW axles, two rigid and two self-steering axles * Air suspension with lift/lower function Iodpfx Agoy Aug Dj Isat * Drum brakes * Self-steering axles with electromagnetic reversing lock, activated via reverse gear or manually Brake system: * WABCO brake system compliant with EU regulations and EBS-E (4S3M) Electrical system: * Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: * Steel structure made of high-strength fine grain steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for optimal corrosion protection * Trailer colour RAL 3002 Carmine Red * Rims Silver Grey * Tarp RAL 9006 (brilliant direct) Options included: * At the gooseneck and at the rear, left and right, one bracket each for warning signs, including socket * 2-inch king pin * One galvanized steel front wall * Yellow-red air couplings at the galvanized front connection strip * 4 wheel chocks with holder on the front wall * 3 tiers of wooden boards * Galvanized folding supports under the loading area bevel * One bracket for a revolving warning light at the rear end of the trailer * Height-adjustable curtain structure – approx. 3,960 mm? * Galvanized front wall with tensioning mechanism for sliding curtains. Height adjustable by approx. 400 mm * Roof brand EDSCHA, can be slid forward on ALU roof profile beams (bolted to front and rear wall) * 3 pairs of movable stanchions in the loading area * Body hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with fold-up portal beam * Sliding tarp with 700 mm reserve in length; tie-down straps at approx. 600 mm intervals. Height upper edge of body approx. 3,960 mm (loaded) * Driving with the sliding roof open is not permitted and will damage the tarp * Body at the rear closed with anodized ALU swing doors * Latch-on rail for ALU loading ramps at the rear of the vehicle * Control valves for hydraulic widening fitted to the right-hand side of the trailer * White reflective tape as per EU regulations on the sides, red at the rear * Electro-hydraulic unit under the rear loading area * One mudguard at the rear of the trailer * European reflective signs (red-yellow) at the rear of the trailer * Hand…

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually Iaedpfx Agjy Auh Io Iet * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.590 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from equipment specifications. Complete equipment list available on request. Neck: * Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Area: * Extendable loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out external lashing rings (LC 5,000 daN) * 3 pairs of fold-out external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cut-outs in the external frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate over the axles Tyres: * Tyres 245/70 R 17.5 3PMSF – brand at our discretion. Load index (146/146F) TPMS: * TPMS tyre pressure monitoring system compliant with ECE R 141. Data transfer to the tractor unit via the standardised EBS interface according to ISO 11992. For correct display, the tractor unit must support receiving and displaying this data. Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, all axles hydromechanically forced-steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting / lowering valve * Axle tool Brake System: * WABCO brake system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations, 24V lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15 pin. Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure is automatically shot-blasted with a centrifugal blasting machine after welding * Second sandblasting with corundum for optimal adhesion of the coating system * Final paint with 2 coats of 2K topcoat, single colour in RAL 3002 carmine red, according to RAL system 841GL * Rims in silver grey * Rear section metallised and painted in RAL 9010 (pure white) Accessories: * 2-inch king pin Iaodpfx Ajy Auifjg Ijt * One galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised front connection rail * Spare wheel holder in front of the front wall (without spare wheel) * Electro-hydraulic power pack * Remote steering front and rear via cable remote control using push buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mounting rail for aluminium ramps at the gooseneck with integrated collision protection * Gooseneck and rear plate each fitted left and right with a bracket for warning boards incl. socket * Bracket for a rotating beacon at the rear of the trailer * Galvanised folding supports beneath the loading area’s rear bevel * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) * Load gauge for determining axle loads including load diagram * Sanded coating applied to the checker plates on the gooseneck and loading area for slip resistance * Gooseneck fitted with plug-in aluminium side and rear panels, approx. 2,440 x 400

Stanje: novo, največja dovoljena obremenitev: 58.860 kg, skupna masa: 73.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick Extendable loading platform: * Extendable loading platform with rear chamfer approx. 500 mm x 8° * 8 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating * Ramp with hydraulically folding and unfolding ramp sections * Hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 50,000 kg * In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position Axles: * BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes * Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Technical axle load: 12,000 kg each Tyres: * Tyres 235/75 R 17.5 3PMSF – make of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Brake system: * Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: * Steel structure made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot blasted after welding with a blast wheel system * Second blasting treatment with corundum for optimum adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (pure white) Ijdpfxsy Augwe Ag Ioat Including the following additional equipment: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * A spare wheel carrier in front of the front wall * Yellow-red air couplings at the galvanized front connection strip * A bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the chamfered section of the loading platform * Super Grip 2 rubber coati

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment: Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear chamfer * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized * 1 LED work light mounted top left and right on the front wall, wired to the connection strip for the tractor LOADING AREA: * Loading area approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface with 5 mm steel plate reinforcement on lifting bed and loading area, rated for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered * 3rd axle with electromagnetic reverse lock, can be activated by reverse gear or manually * 1st axle with start-up aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edge of the ramp tips, switch located next to ramp control * Ramp locking in driving position via quick-release * Sand coating painted on external frame of the ramp and on the ramp tip * Mechanical lateral drop leg supports in the ramps for docking to unloading ramps * Hydraulic ramp control valves on the right side of the vehicle BRAKE SYSTEM: Iodjy Auhhopfx Ag Ieat WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Wheels silver grey * Sideboards natural aluminium * Wheel hubs according to axle manufacturer * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connection strip for supply lines to the tractor, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain attachment points on inner left/right of the front wall, incl. Alu tray underneath left/right for storing chains or straps * Behind the front wall screwed-on DELIGNIT panel (approx. 12 mm thick) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope presser roller * Deflection pulley for winch with shackle and bolted lashing point

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel Iaedpfxoy Auhus Ag Ist * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.980 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Gooseneck with approx. 45° beveled front corners and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading platform (extendable version): * Extendable loading platform with rear chamfer approx. 1,000 mm x 8° * 6 pairs of folding-out lashing rings (LC 5,000 daN) * 3 pairs of folding-out lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading platform (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approx. 48 mm thick, with checker plate over the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lift capacity (approx. 50 t static load) Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit is via the standardised EBS interface per ISO 11992. For correct display, the tractor unit must be able to transmit and display these data. Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock activated by reverse gear and manually * Air suspension with lift/lower valve * Axle tools Brake system: * Brake system compliant with EU regulations with EBS-E (2S2M), no connecting lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grain steels Iodey Aufmepfx Ag Ijat * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding with blast wheel machine * Secondary blasting with corundum for optimal coating adhesion * Final painting with 2 layers of 2K topcoat, single colour RAL 3002 Carmine Red as per RAL System 841GL * Rims in silver-grey * Rear section metallized and painted in RAL 9010 (pure white) * Paint system tested in salt spray test per ISO 9227-NSS * Cavity sealing with special wax Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights synchronized with the indicator * ASPÖCK-UNIBOX at the front connector rail with sockets: 24N, 24S, & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One galvanized steel front wall, approx. 400 mm high * One spare wheel carrier in front of the front wall * Yellow-red air couplings on the galvanized front connection rail * 4 chock blocks with holder at the front wall * Mount at the rear of the gooseneck for ALU approach ramps * Galvanized folding supports under the loading platform rear chamfer * At the gooseneck and on the rear panel, left and right, each with a bracket for warning signs including socket * Load gauge for determining axle loads with load diagram * On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in stanchions are removable. (Superstructure length approx. 2,560 mm) * One galvanized toolbox integrated in the beveled gooseneck * 3 pairs WADER C

Stanje: rabljeno, največja dovoljena obremenitev: 31.250 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2016, dolžina tovornega prostora: 19.480 mm, širina tovornega prostora: 3.000 mm, višina nakladalnega prostora: 780 mm, skupna širina: 2.550 mm, skupna višina: 2.300 mm, Leto izdelave: 2016, Oprema: ABS, Broshuis E-2190/24 Polnizki priklopnik Prva registracija Gigant osi 1 dvižna os Iasdpfxoy A Apme Ag Ijt Bobnaste zavore z ABS in EBS Pnevmatike: 205/65 R17,5 35/40% Zračno vzmetenje Skupna masa: 42.000 kg, Lastna masa: 10.750 kg, Nosilnost: 31.250 kg Dolžina labodjega vratu: 4,15 m, Dolžina tovornega prostora: 8,93 + 6,40 m, Širina: 2,55 m + 2x25 cm, Višina nakladalne površine: 78 cm Skupna nakladalna dolžina: 19,48 m Zadnje podporne noge Žepi za stebričke 4x kontejnerske zapore (twistlocks) Prstani za privezovanje Pridržujemo si pravico do napak, tipkarskih napak in vmesne prodaje.

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2012, with air suspension, hydromechanical forced steering, single telescopic loading platform STZ-L Gooseneck - robust steel welded construction - designed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (2-circuit steering) in flat construction (build height 235mm) with adjustable guide elements - ball-bearing turntable saddle plate with interchangeable 2" king pin and adjustable steering wedge Loading Platform - single telescoping, designed as external-internal tube construction with a 1,000 mm long fixed front section - locking of extendable stages via spring-loaded cylinders and conical bolts Running Gear - air-suspended 3-axle chassis, - BPW (Eco) axle unit, consisting of three hydromechanically forced-steered stub axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - lifting and lowering valve as standard for lowering to min. 825 mm or raising to max. 1025 mm - loading height 1: 885 mm Iaedpfxjyrzv Ao Ag Iot - loading height 2: 925 mm Vehicle Rear - straight design - short 1,000 mm rear overhang from the center of the last axle - mechanical rear support Brake System - 2-line dual-circuit compressed air brake system with diaphragm brake cylinders - automatic load-sensitive braking (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - anti-lock braking system (ABS) Special Equipment - central lubrication system "BekaMax" - electric power unit - radio remote control Technical Data Gooseneck Loading platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Fifth wheel height loaded: 1,300 mm Loading Platform Loading area (LxW): 10,000 x 2,550 mm Telescopically extendable by 7,500 mm in stages up to (LxW) 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (2-circuit steering)

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2009, with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L gooseneck - robust steel welded construction - formed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (installation height 235mm) with adjustable guide elements - turntable-mounted fifth wheel plate with interchangeable 2” kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as external-internal tube construction with fixed 1,000 mm front platform section - Extension stages locked via spring-actuated cylinders and conical pins Chassis - 3-axle air suspension chassis - BPW (Eco) axle assembly comprising three hydromechanically forced-steered steering-axle units - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a minimum platform height of 825 mm or maximum of 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of vehicle - Straight design - Short rear overhang of 1,000mm from the center of the last axle - Rear mechanical support Brake system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Iaodpfx Ageyrzwts Iot Technical data Gooseneck Platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Coupling height loaded: 1,300 mm Loading Platform Platform (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In increments up to (LxW): 17,500 x 2,550 mm Loaded platform height: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stanje: rabljeno, največja dovoljena obremenitev: 38.000 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2009, with air suspension, hydromechanical forced steering, single-extendable loading platform, STZ-L gooseneck - robust steel welded construction - formed loading platform 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (installation height 235mm) with adjustable guide elements - turntable-mounted fifth wheel plate with interchangeable 2” kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as external-internal tube construction with fixed 1,000 mm front platform section - Extension stages locked via spring-actuated cylinders and conical pins Chassis - 3-axle air suspension chassis - BPW (Eco) axle assembly comprising three hydromechanically forced-steered steering-axle units - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a minimum platform height of 825 mm or maximum of 1,025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of vehicle - Straight design - Short rear overhang of 1,000mm from the center of the last axle - Rear mechanical support Brake system - Dual-line full air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment - Central lubrication system "BekaMax" - Electric power unit - Radio remote control Iajdpfx Agsyrzv Ns Iet Technical data Gooseneck Platform (LxW): 3,500 x 2,480 mm Build height above fifth wheel: 235 mm Coupling height loaded: 1,300 mm Loading Platform Platform (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In increments up to (LxW): 17,500 x 2,550 mm Loaded platform height: 925 mm (+/- 100 mm) 2nd driving position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced-steered (dual-circuit steering)

Stanje: rabljeno, največja dovoljena obremenitev: 90.000 kg, skupna masa: 122.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2020, Eurocompact 3 Excavator Deck, extendable, with 5 pendulum axles Weights and Speed (80 km/h) Fifth-wheel load: 26,000 kg Axle load: 8 x 12,000 kg Permissible total weight: 122,000 kg Tare weight: approx. 32,000 kg Payload: approx. 90,000 kg Gooseneck Length x Width: 3,755 mm x 2,480 mm Fifth-wheel height (loaded): 1,350 mm Steering lock radius front/rear: 1,300 mm / 2,750 mm King pin: 3.5'' Fifth-wheel load: 26,000 kg Tare weight: 4,000 kg 3-axle front undercarriage Single tires 245/70 R 17.5 with pendulum axles, axle load 12-14 t Steering: opposite steering arrangement Wheelbase: 1,500 mm Undercarriage width: 2,750 mm Tare weight: 7,000 kg Excavator deck Single-stage telescoping with detachable rear section Length x Width: 6,900 mm x 1,380 mm with folding outriggers and insertable mats Extendable by: 4,000 mm Construction height: 350 mm Loading height when loaded approx. 450 mm with 100 mm ground clearance Tare weight: 10,000 kg 5-axle rear undercarriage (prismatic) Single tires 245/70 R 17.5 with pendulum axles, axle load 12-14 t Steering: forced steering Wheelbase: 1,500 mm Undercarriage width: 2,750 mm Ijdeyrzwmspfx Ag Ieat Tare weight: 11,000 kg Wireless remote control Central lubrication system Power generator

Stanje: rabljeno, največja dovoljena obremenitev: 37.640 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2014, naslednji pregled (TÜV): 02/2026, dolžina tovornega prostora: 9.230 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 900 mm, prostornina tovornega prostora: 21 m³, Oprema: ABS, * 2-cevni zračni priklop * Podpora zadaj * Spredaj podporni vitel * ABS Iaedpfx Agew Ririj Ijt * Dvižna os * SAF osi ----Nadgradnja: Kaessebohrer LB4E EX-1 KK Lowbed nizkopodni polpriklopnik (2350 mm/labodji vrat + 9230 mm/ploščad), višina nakladanja cca 900 mm, razširljiva do 3.160 mm, izvlečna v 12 stopnjah do 19.575 mm skupne dolžine/ BMIN 12.000, BMAX 18.000 mm, 3. in 4. os samousmerljivi, naletne rampe aluminij, jeklena/lesena tla, vpenjalni obroči, twistlock. Prodaja le pravnim osebam. PRI IZVOZU JE TREBA PLAČATI SAMO NETO CENO !!!!! VSE INFORMACIJE BREZ GARANCIJE VKLJUČNO Z OPREMO IN DODATKI. Osnova vseh prodajnih pogodb, računov, predračunov, naročil in prodajnih pogovorov so naši splošni pogoji (glejte Impressum).

Stanje: rabljeno, lastna masa: 8.550 kg, največja dovoljena obremenitev: 27.450 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2020, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17,5, barva: srebrn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, zračno vzmetenje, 1. os dvižna, ABS (anti-blokirni sistem), hidravlične rampe, zadnje podpora, opore. 9 t osi, bobnaste zavore, višina nakladanja pribl. 880-950 mm, možno razširiti na 3.050 mm, dolžina nizkega ležišča 8.800 mm, dolžina labodjega vratu 4.000 mm, skupna masa s 3-osnim vlačilcem 42.000 kg, nosilnost 31.290 kg. Rezervno kolo na voljo za doplačilo! PODATKI O DODATNI OPREMI SO BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Isdjyyc Epopfx Ag Ieat

Stanje: rabljeno, največja dovoljena obremenitev: 24.630 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2017, dolžina tovornega prostora: 12.640 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.550 mm, skupna višina: 2.800 mm, Oprema: ABS, Low-bed: 8,740 mm, Load height of the bed: approx. 1,060 mm, gooseneck: 3,900 mm, height difference between gooseneck and bed: 580 mm, storage box on the gooseneck, continuous underfloor box / stainless steel toolbox, timber plank floor, 27 lashing rings per side, 9 stake pockets per side, stake holder under the chassis, mounting rail for approach ramps at the rear, front hydraulic support, separate hydraulic unit, Duo-Matic brake connection, hydraulic quick coupler with 2 connections, mounting for rotating beacon at the rear, ABS, EBS, BPW Eco axle(s), 2nd and 3rd axles hydraulically forced-steered, drum brake system, air suspension with lifting and lowering device. Vehicle may have advertising decals and/or lettering applied. SI86237 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to submit an offer from our partner workshops! Vehicle may have advertising decals and/or lettering applied. Our general terms and conditions of delivery and payment apply. We are happy to provide a financing or leasing offer for this vehicle. Please contact us! Iasdpexity Hjfx Ag Iet

Stanje: rabljeno, največja dovoljena obremenitev: 21.320 kg, skupna masa: 27.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, dolžina tovornega prostora: 13.550 mm, višina nakladalnega prostora: 800 mm, Leto izdelave: 2022,

Stanje: rabljeno, največja dovoljena obremenitev: 84.000 kg, skupna masa: 105.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2000, Oprema: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg RO HU due Gooseneck: 3,900 mm Saddle height: 1,350 - 1,450 mm Low bed: Length: 13,550 mm (600 mm of which tapered) -- Width: 3,000 mm -- Loading height: 920 mm TELESCOPIC (with sliding table - 500 mm) Iedjx Txlljpfx Ag Ieat Insertable rails Axle loads technical: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTABLE Axles 2, 3, 4, 5, 6 = FORCED STEERED Tyres: 9.5 R 17.5 We expressly reserve the right to make changes, prior sale, and errors. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sale of goods. The details in the purchase agreement are binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops! The vehicle may be labelled and/or branded for advertising purposes. Our general delivery and payment terms apply.