Müller-Mitteltal Ts3 Rm Lenk/Lift Radmulden Hydraulik/Rampen nakup rabljenega (23.985)

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: Chjdpfxeu I Iqxo Akcja * Parabolic springs ----Drawbar / Coupling Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate, safety lock pin for various support heights * Enclosed steel mudguards with spray protection * Enclosed side underrun protection usable as advertising panel * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Body: * Swiveling cable drum body, clear width between drum arms 1,700 mm, with tension lock for securing drums at the support arm ends, as well as a central claw lock to secure the cable drum body to the chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter including centering and rotating ends * 1 pair of polyamide centering cones, stepwise offset ----Chassis: * Chassis made of torsion-resistant square tubes and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brakes: Chsdpfxeu I Iqlj Akcea * EBS brake system * Drum brakes * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange eye: * Drawbar with 40 mm screwed towing eye (height adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring ----General attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate; safety locking pins for various support heights * Closed steel sheet mudguards with splash protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm ----Superstructure: * Pivoting cable drum superstructure, clear width between drum arms 1,700 mm, with tension locks for securing the drum at the ends of the support arms, and central claw locking device securing the drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-covered drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of stepwise offset centering cones made of polyamide ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 6.870 kg, skupna masa: 9.900 kg, konfiguracija osi: 1 os, Leto izdelave: 2026, * KWH 9.9 ML: ----Brake System: * EBS braking system * Drum brakes * Emergency release device for spring brake cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange Eye: * Drawbar with 40 mm bolted towing eye (height-adjustable mm) ----Electrics / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * RDÜ tire pressure monitoring system ----General Attachments: * Support winch at the front * Spring-assisted square tube supports at the rear with base plate. Safety locking pins for various support heights * Closed steel mudguards with spray protection * Closed side underrun protection, can be used as advertising space * Plastic toolbox with floor inlay (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock on the drum arm ends, plus central claw lock securing the cable drum superstructure to the chassis * Motor-driven hydraulic cable drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped ----Chassis: * Chassis made from torsion-resistant square tubing and cross beams ----Pump Unit: * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) ----Tyres: * 315/80 R 22.5 ----Unladen Weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Notes: Chjdpfx Aou I Iq Eskcsa * New vehicle with full manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 3 x 11 ton, osi BPW Eco * Listnate vzmeti * mehanski izravnalnik osi zadaj * stranski odbijač * vrtljive opore zadaj na okvirju voznega podvozja * mehansko nastavljivi paketi opozorilnih tabel spredaj in zadaj * sprednji zaprti plastični blatniki in zadnji ravni pocinkani jekleni ščitniki, opremljeni s ščitniki proti brizganju * odsevni trak ob strani in zadaj * pokrov (vroče pocinkan), za orodjarno v platformi podvozja * orodjarna iz pocinkane jeklene pločevine, cca 650 x 300 x 600 mm – črna, prašno lakirana – na strani pod vozilom Cjdpfx Ajq Dyv Iskcjha * 15-polni vtič * LED osvetlitev 12 / 24 V * LED rotacijska luč (snemljiva) zadaj * vlečna prikolica s 40 mm vlepno palico in nastavitvijo višine s pomočjo vzmeti in zapornega mehanizma * na vsaki strani 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati možnost pritrjevanja * Paket La-Si, sestavljen iz: 2 vlepnih palic (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spuščajočih * obremenitev v vse smeri, vgrajeno v zunanji okvir v kotih, 13,4 t, sicer 10 t * 6 parov mehanskih iztegnjenih podstavkov za 3 m celotne širine (vendar ne na zadnjem nagibu) * podaljševalne deske pod tovorno površino, shranjene v predalu * nosilec za žlico bagra, ki sega od zadnje osi do zaključnega nosilca, dolžina cca 2.100 mm (2 para 6,4 t pritrdilnih obročev na strani nosilca za žlico bagra) * hidravlične iztegnjene rampe (cca 4.650 x 720 mm) z hidravlično iztegnljivim končnim delom in varnostnimi ventili za zadrževanje tovorja, hidravlični bočni premik ramp * hidravlični razdelilnik pretoka v prikolici (pri hidravlični moči črpalke v tovornjaku nad 40 l do največ 140 l/min), dvojna hidravlična povezava * tovorna površina nad vrtljivim obročem: cca 1.960 x 2.520 mm * zadnja tovorna površina: cca 6.500 x 2.520 mm (vključno z 860 mm nagibom za vožnjo) * višina tovora cca 860 mm +/- 30 mm kompenzacijski agregat * podvozje, vrtljiv obroč, iztegnjeni podstavki, zadnje opore in iztegnjene rampe, vroče pocinkane. * osi, vzmeti, vlečna prikolica, zračni rezervoar itd., lakirane v črni barvi. * Novo vozilo z garancijo proizvajalca. * Pridržujemo si pravico do sprememb in napak. * Na voljo takoj, dobava iz Egestorfa.

Stanje: novo, največja dovoljena obremenitev: 23.210 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, * T 3: * Zavorno sistema EBS * Naprava za odklepanje zavor v primeru izrednih razmer za cilindrične zavorne zavornice * Bobnaste zavore * 3 x 11 ton BPW osi Eco * Listne vzmeti * mehanična poravnava osi zadaj * stranski zaščitni element * vrtljiva opora zadaj na okvirju * mehansko nastavljivi opozorilni znaki spredaj in zadaj * sprednji, zaprt plastični blatnik ter zadnji, ravno upognjen jeklen zaščitni element z zaščito proti brizganju * odsevni trakovi ob straneh in zadaj * pokrov (prevlečen s cinkom) za orodjarno na platformi podvozja * orodjarna iz pocinkanega jekla, pribl. 650 x 300 x 600 mm - črna, prašno lakirana - nameščena ob strani podvozja Chedpfx Akotplwfecja * 15-polni električni vtič * LED-osvetlitev 12 / 24 V * LED-rotacijska luč (odstranljiva) zadaj * vlečna priprava s 40 mm vlecno palico in nastavitvijo višine s pomočjo vzmetne palice in zapornice * ob straneh po 4 žepov za pritrditev (vendar brez pritrdilnih palic), hkrati omogočajo pritrditev z jermeni * paket La-Si, sestavljen iz: 2 pritrdilnih točk (6,4 t) spredaj levo in desno na glavnem okvirju platforme podvozja * 5 parov UVV pritrdilnih obročev, vrtljivih in spustljivih * obremenljiv v vseh smereh in vgrajen v zunanji okvir, v kotih 13,4 t, sicer 10 t * 6 parov mehanskih raztegnih opor za 3 m celotne širine (vendar ne na zadnjem nagibu) * plošče za širitev pod tovorno površino, shranjene v predalu * podpora za roko bagra čez zadnjo os do zaključnega nosilca, dolžina pribl. 2.100 mm (2 para pritrdilnih obročev 6,4 t ob strani na podpori za roko bagra) * hidravlične raztegljive rampe (pribl. 4.650 x 720 mm) s hidravlično raztegljivim končnim delom in varnostnimi ventili za zadržanje tovora, hidravlična stranska premika ramp * hidravlični razdelilnik pretoka na prikolici (pri hidravlični moči črpalke na tovornjaku nad 40 l/min do maks. 140 l/min), hidravlični sistem z dvema vodoma * tovorna površina nad vrtljivim obročem: pribl. 1.960 x 2.520 mm * zadnja tovorna površina: pribl. 6.500 x 2.520 mm (vključno z 860 mm nagibom) * višina nakladanja v obremenjenem stanju pribl. 860 mm +/- 30 mm kompenzacijski agregat * podvozje, podvozna plošča, raztegnite opore, opore zadaj in dostopne rampe, prevlečene s cinkom. * osi, vzmeti, vlečna priprava, zračni rezervoar itd., črne barve. * Novo vozilo s proizvajalčevo garancijo. * Pridržujemo si pravico do spremembe cen in razpoložljivosti. * Na voljo takoj iz Egestorfa.

Stanje: rabljeno, največja dovoljena obremenitev: 18.050 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2010, širina tovornega prostora: 2.520 mm, Oprema: ABS, ? Vzmetne rampe ? Nosilec za rezervno kolo ? Na stran: 7 x pritrdilnih obročev ? Na stran: 4 x žepki za stranice ? Vlečno oko 50 mm ? Nakladalna višina: pribl. 910 mm Csdjy T Tvxjpfx Akcsha ? Bobnasta zavora ? ABS ? Listno vzmetenje ? EBS ? Dvojna kolesa Vse informacije brez garancije / Pridržujemo si pravico do predhodne prodaje.

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (elektronski zavorni sistem) * Naprava za sprostitev v sili za cilindrične vzmetne akumulatorje * Bobnaste zavore * 2 x 7 ton, osi Gigant * Zračno vzmetenje s sistemom za dvigovanje in spuščanje * Povezovalna palica, nastavljiva po višini za 300 mm * Podaljšek povezovalne palice za 250 mm na 2.250 mm * Nadzor tlaka v pnevmatikah s prikazom v kabini tovornjaka prek signala EBS – brez dodatne vgradnje v tovornjak * 15-polni vtič za napajanje * LED osvelitev * Prednja oporna noga * Zunanja, zložljiva oporna noga zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, na desni strani spredaj na čelni steni * Stranska zaščita pred trkom Chjdpsl Th Dfefx Akcea * Plastični blatnik * 50 mm debela deska iz iglastih vrst lesa * Pred čelno steno in zadaj pritrdilna točka za poznejšo namestitev 20-palčnih zapahov * Vijakom pritrjena čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – zložljive, na sredini enkrat razdeljene * Jeklena zadnja stena, ki se lahko vrine med rami, v primeru, da ni v uporabi, se shrani v notranjosti pred čelno steno * Zadnji nosilci, vijakom pritrjeni * Zunanji okvir z luknjami, približno 45 stopinj, s 2 tonami nosilne sile na vsakih 480 mm * Možnost vgradnje 3-tonskih pritrdilnih obročev na vsakih 600 mm – na vsaki strani nameščenih 4 pritrdilni obroči * V kotih spredaj in zadaj, na vsaki strani po 1 x 6,3 tone nosilne sile * Profifix pritrdilna letva na vzdolžni osi, na sredini, za pritrditev do LC 3000 daN * Na čelni in zaključni nosilci različne luknje za pritrditev do 1,2 tone * Enodelna mehanska rešetasta ploščad za dostop z vzmetnim mehanizmom za delovanje z eno osebo, približno 2.750 x 600 mm (lahko se skupaj potisne do 20 mm) * Naklon za dostop zadaj, približno 860 mm * Podvozje, povezovalna palica, čelna stena, zadnja vrata, zložljive oporne noge in ploščadi za dostop, vroče pocinkane * Os, vzmeti, zračni rezervoar, priključna cev in oporne noge, prebarvani v črno * Stranske stene v barvi RAL 9010, čisto bela * – ojačan in certificiran nadgradnji po EN 12642 XL vključno s potrdilom o varnosti tovora – * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržani * Na voljo takoj iz Egestrofa

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * EBS (elektronski zavorni sistem) * Naprava za sprostitev v primeru izredne potrebe za vzmetne cilindrove zavore * Bobnovi zavori * 2 x 7 ton, osi Gigant * Zračno vzmetenje s sistemom za dvigovanje in spuščanje * Vlečna palica, višina nastavljiva za 300 mm * Podaljšek vlečne palice za 250 mm na 2.250 mm * Nadzor tlaka v pnevmatikah z možnostjo prikaza v kabini tovornjaka prek signala EBS - brez vgradnje na strani tovornjaka * 15-polni vtič za elektriko * LED-osvetlitev * Podpiralna opora spredaj * Zunanja, zložljiva podpiralna opora zadaj * Plastična orodjarna škatla, približno 858 x 500 x 500 mm, spredaj na desni strani, na čelni steni * Stranski zaščitni sistem * Plastični četrtni odbijač * 50 mm lesen talni oblog * Pred čelno steno in zadaj, naprava za naknadno montažo 20-palčnih zaklepnih mehanizmov * Vijatična čelna stena iz gladke pločevine * Stranske stene iz jeklene pločevine – trapezno profilirane – zložljive, na sredini 1x razdeljene * Jeklena zadnja stena, ki jo je mogoče vstaviti med rampe, držalo za uporabo pa je v notranjosti pred čelno steno, kadar ni v uporabi * Zadnji nosilci, vijatični * Zunanji okvir z luknjami, približno 45 stopinj, ukrivljen, z vlečno silo 2 tone na 480 mm * Vgradnja 3-tonskih pritrdilnih čepov je možna na vsakih 600 mm – na vsaki strani je nameščenih 4 pritrdilni obroči * V vogalih spredaj in zadaj je na vsaki strani po 1 pritrdilni obroč s kapaciteto 6,3 tone * Profifix pritrdilna letev v vzdolžni osi, na sredini, za pritrditev do 3000 daN * V čelni in končni nosilni konstrukciji so različne luknje za pritrditev z zmogljivostjo 1,2 tone * Enodelna mehanska rešetasta rampa z vzmetjo za enoosebno uporabo, približno 2.750 x 600 mm (lahko se podaljša do 20 mm) * Zadnja nagibna plošča, približno 860 mm * Podvozje, vlečna palica, čelna stena, zadnja vrata, zložljive podpore in rampe so vroče pocinkane * Osje, vzmeti, zračni rezervoar, priključni spoji in podpiralne opore so pobarvane v črni barvi * Stranske stene v barvi RAL 9010, čisto bela * --ojačana in certificirana nadgradnja po standardu EN 12642 XL, vključno s certifikatom za pritrditev tovora-- * Novo vozilo z garancijo proizvajalca * Napake in vmesna prodaja pridržane Codpfxsl Thvxo Akcjha * Na voljo takoj, dobava iz Egestrofa.

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment ----Electrics / Lighting: * LED rear lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bumper buffer * Mechanical drop-down supports at the rear ----Container / Low-bed platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roll grooves in the bogie area * When transporting roll-off containers, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking and mechanically insertable front stop angles in the running rails * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops fitted with pivoting stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surfacing in the running area of the access slope * 1 pair of aluminium loading ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) Csdopk D Awepfx Akceha ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Ride height, loaded: approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape, side and rear * Axles, turntable, drawbar and air tank painted black * Hot-dip galvanized main frame ----Information: * Gross vehicle weight technically possible: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area Chedpfx Aetplv Tokcea * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: Chsdspk D Iispfx Akcsa * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 8.670 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline: ----Zavore: * Wabco EBS * Sistem za sprostitev v sili za vzmetni cilindri * Bobnaste zavore ----Os: * 2 x 5,5 tone, osi BPW ----Vzmetenje: * Parabolne vzmeti s tandem sistemom za izravnavo ----Vlečna prikolica / prirobnična vlečna prikolica: * Višinsko nastavljiva vlečna prikolica, vroče pocinkana, za 300 mm, s 40 mm prirobnično vlečno prikolico ----Elektrika / razsvetljava: * Sistem za nadzor tlaka v pnevmatikah RDÜ * LED razsvetljava * 15-polni vtič Chedpeq Hg Dxefx Akcoa ----Splošni dodatni deli: * Orodjarna omara iz pocinkanega jekla, desna stran * Vijična zaščita proti podvozju * Plastični blatniki * Jost mehanska opora spredaj * 2 mehanski, vroče pocinkani oporni nogi zadaj ----Nakladalna prikolica: * Mrežaste kljuke na straneh in zadaj, v ležajih osrednjega zaklepanja, ter 3 kose na zunanji strani čelne stene * Vroče pocinkano podvozje * Jeklena paleta, 3-stranski nakladalni nadgrad * Neprekinjene stranske stene, brez srednjega nosilca, z možnostjo odklopitve z vzmetjo za dviž * Zadnja vrata z možnostjo odklopitve in nihanja preko ročnega osrednjega zaklepanja * Vroče pocinkana vijična zadnja stena * 4 mm jeklena pločevina za dno * Nosilna tirnica zadaj za nakladalne rampe ----Pritrditev tovora: * Na vsakem vogalu 1 x 5 ton, vgrajene in zložljive zatezne vrvice * Na vsaki strani 4 x 3 tone, vgrajene in zložljive zatezne vrvice v zunanjem okvirju ----Rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.310 x 400 mm (nosilnost 8 ton / par), primerne za vozila z gumijastimi in goseničnimi pogoni * Zaklenljiv prostor za shranjevanje zadaj, pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 235/75 R 17,5 ----Barvanje: * Osi, vzmeti, rezervoar za zrak, vlečna prikolica in oporne noge, pobarvane v črni barvi * Barvanje bočnih stranic v RAL 9010, čisto bela * Barvanje stranskih sten v barvnem odtenku RAL, na voljo po dogovoru * Dno in čelna stena vroče pocinkane ----Informacije: * Nadgradba je ojačana s certifikatom za pritrditev tovora v skladu s standardom EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržujemo si pravico do sprememb in prodaje * Dobavljivo od približno 45. tedna leta 2026

Stanje: novo, največja dovoljena obremenitev: 8.600 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * KA-TA-R 11,9 Masterline: ----Zavore: * Wabco EBS * Sistem za sprostitev v sili za vzmetni akumulatorski cilinder * Bobnaste zavore ----Osi: * 2 x 5,5 t BPW osi ----Vzmetenje: * Parabolična vzmet s tandem sistemom za izravnavo ----Vlečna prikolica / prikolica s prirobničnim nosilcem: Chedov Dz N Aspfx Akcja * Vlečna prikolica z možnostjo nastavitve višine za 300 mm, pocinkana, s prirobničnim nosilcem 40 mm ----Elektrika / osvetlitev: * Sistem za nadzor tlaka v pnevmatikah RDÜ * LED osvetlitev * 15-polni električni vtič ----Splošni dodatni deli: * Orodjarna iz pocinkane jeklene pločevine na desni strani * Vijakarno pritrjena zaščita pred trkom * Plastični blatnik * Jost mehanska podpora spredaj * 2 mehanski pocinkani zložljivi podstojka zadaj ----Nakladalna prikolica: * Očesne kljuke na straneh in zadaj v nosilcih osrednje ključavnice ter 3 na zunanji strani čelne stene * Pocinkano podvozje * Jeklena paleta, 3-stranska nakladalna prikolica * Neprekinjene stranske stene brez osrednje podpore, z možnostjo zlaganja s pomočjo vzmetne podpore za stransko ograjo * Zložljiva zadnja vrata in nihajna vrata s pomočjo ročne osrednje ključavnice * Vijakarno pritrjena pocinkana zadnja podpora * 4 mm jeklena pločevina na dnu * Nosilna tirnica zadaj za nakladalne rampe ----Varovanje tovorja: * Na vsakem vogalu 1 x 5 t, vgrajena in zložljiva privezna točka * Na vsaki strani 4 x 3 t, vgrajene in zložljive privezne točke v zunanjem okvirju ----Rampe: * 1 par aluminijastih nakladalnih ramp, približno 3.310 x 400 mm (nosilnost 8 t / par), primerne za vozila z gumijastimi in verižnimi gosenicami * Zaklenljiv prostor za shranjevanje zadaj pod nakladalno površino, vgrajen v podvozje ----Pnevmatike: * Pnevmatike 235/75 R 17,5 ----Barvanje: * Osi, vzmeti, zračni rezervoar, vlečna prikolica in podpore pobarvane v črni barvi * Stranska ograja pobarvana v RAL 9010, čisto bela * Barvanje stranskih sten v poljubni barvi RAL je mogoče proti doplačilu * Dno in čelna stena pocinkana ----Informacije: * Nadgradnja ojačana s certifikatom za varovanje tovorja v skladu z EN 12642 XL * Novo vozilo z garancijo proizvajalca * Pridržane spremembe in napake * Prodaja je rezervirana ----Dobavni rok: * Na voljo približno v 45. tednu 2026

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: Codsxmwiyepfx Akcjha 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Kutija za alat

Stanje: rabljeno, barva: rumena, Leto izdelave: 2017, Oprema: ABS, Lastna teža: 4.320 kg Codpfx Aezdqndekcjha Nosilnost: 13.680 kg Skupna dovoljena masa: 18.000 kg

Stanje: rabljeno, največja dovoljena obremenitev: 4.960 kg, skupna masa: 10.500 kg, prva registracija: 04/1993, naslednji pregled (TÜV): 01/2026, dolžina tovornega prostora: 6.260 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 2.430 mm, prostornina tovornega prostora: 37 m³, Oprema: ABS, dvižna zadnja plošča, 2-axle tandem refrigerated trailer, 7 m, with 1 ton tail lift. * THERMOKING LND-II MAX (diesel engine) and stand-by cooling, 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS (Electronic Braking System) * Anti-lock braking system (ABS) No liability for printing or typographical errors. Sale exclusively to commercial customers. Subject to prior sale and errors. Changes, prior sale, and errors are expressly reserved. The description serves solely for the identification of the vehicle and does not constitute a warranty in the legal sense of the purchase contract. The purchase contract description is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a leasing, financing, or hire-purchase offer Chedpoykxflsfx Akcea Guarantee insurance available upon request from the insurer * TÜV inspection / UVV LBW (tail lift safety test) / tachograph inspection and OBU (On-board Unit) installation can be arranged by our local partners * Export license plates for 30 days available All export documents can be provided, but must be requested individually * Toll collection for Toll Collect can be arranged in-house * Free transfer from Stuttgart airport or Metzingen (Württ) railway station * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles always in stock

Stanje: rabljeno, prva registracija: 06/2010, dolžina tovornega prostora: 11.350 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, - Krmiljena os - Daljinsko upravljanje - Hidravlične rampe - Zgornja nakladalna površina 3500 mm - Spodnja nakladalna površina 7850 mm Chjdpfsx Dzn Ujx Akcsa

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0 ----Braking System: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * Parabolic springs with mechanical rear axle equalization Chodpfx Akjl Th I Ajcja ----Drawbar: * Drawbar with 50 mm towing eye and height adjustment via draw spring and turnbuckle ----Lighting / Electrics: * RDÜ tire pressure monitoring * Multi-voltage system * LED tail lights 12 / 24 V * Rear removable rotating beacon * 15-pin power connector ----General Attachments: * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front and rear * Front: closed plastic mudguards; Rear: straight galvanized steel skirts, each with splash guards * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Four stake pockets per side (stakes not included), also suitable for lashing ----Load Securing (La-Si package consists of): * 2 lashing eyes (6.4 t) front left & right on main frame of the bogie platform * 6 pairs of UVV-certified lashing rings, foldable and lowerable, loadable in all directions, recessed into the outer frame * Corner load capacity 13.4 t, otherwise 10 t ----Widening: * 6 pairs of mechanical fold-out outriggers for max. overall width of 3 meters (except at the sloped rear) * Widening planks stored in the center of the loading area ----Ramps: * Hot-dip galvanized one-piece hydraulic drive-on ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way valve block for retrofit hydraulic lateral ramp shift ----Loading Area: * Over turntable: approx. 1,960 x 2,520 mm & unladen height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unladen height approx. 910 mm (including 860 mm drive-on slope) ----Tyres: * 235/75 R 17.5 twin tyres ----Unladen weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, bogie, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black ----Info: * Permissible gross weight technically up to 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: Chsdpfx Asmi Tmaokcsa * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, prevoženi kilometri: 1.100 km, vrsta prenosa: drugo, barva: bela, skupna masa: 32.000 kg, lastna masa: 6.600 kg, največja dovoljena obremenitev: 25.400 kg, velikost pnevmatike: 425/65R22,5, prva registracija: 03/2016, vzmetenje: zrak, voznikova kabina: drugo, Oprema: ABS, Location of vehicle: Bovenden, 2 axles, BPW axles, air suspension, liftable first axle, ABS (anti-lock braking system), underrun protection, landing legs Superstructure: Liebherr concrete mixer type HTM 1004 approx. 10m³, 2x 10t BPW axles! Suitable hydraulics for engine PTO on the tractor unit available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to alterations, prior sale, and errors! Cjdsi Rk Axopfx Akceha

Stanje: rabljeno, lastna masa: 2.910 kg, največja dovoljena obremenitev: 7.590 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2009, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, rear support, swinging tailgates. Chedpfx Akjv S H Sfscoa Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost from €900 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear Csdpfjl Thy Rsx Akcsha * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor Cedpfx Aoq Dyvyjkcjha * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Brake System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lift and lower facility ----Drawbar / Flange Eye: Cjdpfx Aspk D Dqokceha * Drawbar height adjustable by approx. 300 mm * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with in-cab display via EBS signal; no truck-side installation required) * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Provision for retrofitting 20" container locks at front and rear * Bolted bulkhead made of smooth sheet steel * Fold-down side walls, trapezoidal profile, with drop-side spring assists * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Outer frame with holes, approx. 45° angled, 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Each of the front and rear corners fitted with 1 x 6.3 t lashing ring * Various holes in front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for pneumatic and tracked vehicles; stowed at the rear in a compartment integrated below the deck in the chassis ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Vehicle fully hot-dip galvanized ----Information: * New vehicle with manufacturer’s warranty * Subject to error and prior sale ----Delivery Time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: Csdpfx Akepk D D Ujceha * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7