Priklopnik z delovno ploščadjo

MÜLLER-MITTELTAL 24 to. Kombi Cont. fl.-Liftachse NEU

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Lifting middle axle ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumpers * Mechanical rear drop-down supports ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length of 5,500 - 7,000 mm possible * Pneumatic 4-point container clamp locking as well as mechanically plug-in front stop angles in the guide tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plug-in with pendulum stoppers ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive load securing of skips * 4 lashing rails in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp incline running area * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 Duodetplv Topfx Al Hot ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 10.420 kg, skupna masa: 13.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.030 mm, prostornina tovornega prostora: 20 m³, skupna širina: 2.550 mm, skupna višina: 1.030 mm, Oprema: ABS, We have the largest stock of HÜFFERMANN hook-lift/skip container trailers in Southern Germany available for immediate delivery! ALL TRAILERS HOT-DIP GALVANIZED! 2-AXLE CENTRAL AXLE MINI CARRIER TRAILER - "HÜFFERMANN" MULTIFIX For transporting skip containers according to DIN 30720 Weights: Permissible total weight: 13 t Technical total weight: 13 t With a drawbar load of 1 t Dimensions: Frame length approx. 4,000 mm, for a skip container up to 20 m³ Overall width max. 2,550 mm Container standing height (in driving position) approx. 1,030 mm Frame: Type HTM-3 1340 with Safetyfix consoles, single wheels Welded high-tensile steel frame construction Chassis for rear-loading skip containers Combined load securing system, side Centrefix, Front: one pair removable chocks with pendulum shoes Lashing eyes for securing chains on the sides of the frame Prepared for chainless load securing "Multifix" Closed steel floor between longitudinal beams Frame attachments: 1 pair of lashing points for one stacked skip container 4 pairs of bolt-on 6.3 t lashing brackets on the outer frame Multifix skip container security for one skip container Chainless load securing Multifix for one skip container on the Mini-Carrier without press container transport equipment Drawbar: Welded drawbar with bolted 40 mm towing eye, reversible and height adjustable +/- 200 mm Support device: Front: 1 mechanical steel landing gear with hand crank, operator side left, 1 drop-down support rear Axles: 2 BPW axles with disc brakes ø370 mm, load capacity 7 t/axle, for "E" tires Axle distance: 1,260 mm Wheels: 4 tires 285/70 R 19.5, 143M CONTINENTAL 4 steel rims 8.25 x 19.5 silver Braking/suspension: Braking system according to EC directive 71/320 or ECE R13 Two-line air brake system Brake system manufacturer at factory's discretion EBS system 2S2M, 2nd axle monitored Electronic brake and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded (parking) brake on 2nd axle Aluminum air reservoir Brake/air lines with Duomatic quick coupling EBS/ABS connection cable Mount for EBS and electric plug at the drawbar Air suspension with lifting and lowering device Automatic ride height adjustment from 15 km/h Assistance/safety systems: Weight detection/axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be equipped accordingly, not a certified scale) Lighting/electrics: 24-volt lighting system according to EC Directive 76/756/EEC 2 full LED rear light modules, "Hella branded" 2 front LED position lights 2 rear LED outline marker lights Flashing LED side marker lights, operated via indicator signal LED license plate lamps, integrated into the rear lights Fixed connecting cable with 1 x 15-pin plug 2 additional LED reversing lights, mounted on the left and right rear Coating: Blasted, arc-galvanized, epoxy primer, 2K topcoat by electrostatic process Material overlaps and joints preserved with cavity wax Chassis = RAL 9005 deep black Load securing components = RAL 1003 signal yellow Drawbar/draw tube in chassis color = RAL 9005 deep black Dedpfji Aimrox Al Heut Wheel hubs black = powder-coated Underrun protection = galvanized Side impact protection = anodized Plastic parts black, unpainted

Stanje: novo, največja dovoljena obremenitev: 18.900 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: Dodpfx Aopk D Iiel Heut * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Tool box made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffer * Mechanical rear support legs ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel sheet floor with roller recesses in the bogie area * Suitable for roll-off container transport with container lengths from 5,500 to 7,000 mm * Pneumatic 4-point container clamp lock and mechanical plug-in end stops at the front of the tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plugged in with swinging end stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 cloverleaf-style lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the ramp run-up area * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on the sides & rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Permissible total weight technically possible: 27,000 kg * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 47/2026

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrical / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Tool box made of powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear collision protection buffers * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide roll containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, possible container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for lateral centering of the skips, front 4 skip stops inserted with pendulum mount * Weld bead as anti-slip coating in the ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements for positive and non-positive securing of the skips * 4 lashing bars each, cloverleaf design (side) * 1 pair of 13.4 t UVV lashing rings to the front ----Ramps: * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Dodjl Thwcjpfx Al Hout * Available from approx. CW 44 / 2026

Stanje: novo, moč: 132 kW (179,47 KM), število postelj: 4, število sedežev: 4, vrsta goriva: dizel, vrsta prenosa: samodejen, barva: bela, skupna dolžina: 7.890 mm, skupna širina: 2.320 mm, skupna višina: 2.920 mm, skupna masa: 4.500 kg, lastna masa: 4.040 kg, največja dovoljena obremenitev: 460 kg, medosna razdalja: 445 mm, Oprema: ABS, meglenke, nadzor oprijema, sistem za imobilizacijo, tempomat, Highlights: * Face 2 Face Safety: * Third brake light * ABS * Traction Control System (ASR) * Electronic Stability Program (ESP) * Rearview camera * Summer tires * Immobilizer * Passenger airbag * Driver airbag Lighting: * LED headlights * Fog lights Comfort: * Electrically heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Height-adjustable driver's seat * Automatic climate control * Leather steering wheel * Multifunction steering wheel * Multimedia system * Cruise control * Central locking with remote control Radio/Navigation: * Bluetooth hands-free system Dodjv Dnd Hspfx Al Hout * DAB+ digital radio * Hands-free kit * Navigation system * USB port Motorhome Specific: * Overcab bed/retractable bed * Double floor * Single beds * Rear garage * Awning * Side seating group * Separate shower Other features: * Alloy wheels Further description: Furniture decor "Navarra", upholstery fabric "Pisa", decor "Lasca", Integra Luminary Package 2-axle, Naviceiver with dual-eye reversing camera, steering wheel with controls, solar system pre-wiring, cab carpet, Fiat automatic transmission, 16" alloy wheels, exterior design Carbon, chrome elements on front/rear section, LED cornering lights, LED fog lights, front flat-screen mount, rear slide-out for flat screen, rear garage organizing system, sound system, automatic climate control, leather steering wheel/gear knob, wireless mobile phone charging station, heat exchanger, cab comfort seats, Integra2 2-axle Luminary Plus Package, multifunction outlet, exterior shower (hot/cold), external gas connection, windshield wiper system with winter park position, heated windshield, lithium battery, 5.5 m awning, external camera for tank drainage, documentation fee. --- * We strive to describe the offered vehicle as accurately as possible. However, mistakes cannot be ruled out. If you place particular importance on a specific feature, please speak to our sales staff directly. * Subject to prior sale and errors. --- Model/Year: 2024, New TÜV: yes, Internal ID: N0041660, Engine details: Euro 6dT Final 8, Transmission: Automatic, Body length: 789 cm, Unladen weight: 4040 kg, Payload: 460 kg, Sleeping areas: Rear (195x80), Rear (200x80), Overcab bed (193x150), Seats with belt: 4, Wheelbase: 445 cm, Trailer load (braked): 1500 kg, Trailer load (unbraked): 750 kg, Heating: Alde hot water heating, Fridge volume: 157 l, Freezer volume: 15 l, Fresh water: 140 l, Fresh water (incl. boiler): 160 l, Waste water tank volume: 100 l, Charger: 18 A, Battery: 100 Ah, Upholstery: fabric, 230V sockets: 3, 12V sockets: 1, Additional: New TÜV, CHASSIS: ASR, ABS, fog lights, central locking/remote control, torque converter automatic, electrically adjustable exterior mirrors, jack, Fix & Go Kit, multifunction steering wheel, alloy wheels, immobilizer, third brake light, cruise control, heated exterior mirrors, diesel tank 90 l, ESP incl. hill-holder, driver airbag, passenger airbag, BODY: electric entry step, one-piece entry door with window, Remis darkening blinds left + right, GRP body, blind for windscreen, flyscreen blind entry door, third brake light, awning light, opening windows all around, awning, garage door, gas locker, framed windows, Midi-Heki rooflight, waste bin in door, INTERIOR FITTINGS: cassette blinds, flyscreen blind entry door, electric front blind, fixed bed, KITCHEN: extractor hood, AES refrigerator, 3-burner cooker, waste bin, SANITARY: pressurized water system, waste water, electric...

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1: Suitable for swap containers (Abrollbehälter) and as low-loader trailer ----Braking System: * EBS electronic braking system * Emergency release facility for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10-ton axles ----Suspension: * Air suspension with lift and lower system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring system, display option in truck via EBS signal (no truck-side installation required) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box, powder-coated steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Rear plastic buffer bumper * Foldable 'A' sign at the rear ----Loading Platform: * Main frame with raised outer frame to guide swap containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock and mechanical plug-in stops in the running channel at the front, securing certificate according to DIN 30722-1 * Weld bead as anti-slip covering in the inclined running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair 10 t UVV lashing rings at the front wall carrier * 3 pairs 10 t UVV lashing rings on each side of the outer frame * Each side with 4 x 2 t cloverleaf lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: Dujdpfol Tq Nmex Al Hot * 1 pair aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking elements, rear drop-supports hot-dip galvanized * Drawbar, axles, and air tanks painted in a black shade ----Additional Info: * New vehicle, no initial registration, full manufacturer warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available approx. from KW 43 / 2026

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS brake system * TPMS tyre pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Rear swing-down supports on chassis frame * Mechanically adjustable warning board kits front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Contour tape, reflective on sides and rear * Hinged lid (hot-dip galvanized) for toolbox mounted on turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at rear * Drawbar with 40 mm towing eye and height adjustment via spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included), with integrated lashing options * Load securing package consisting of: 2 lashing points (6.4 t) front left & right on main beam of turntable platform, 5 pairs of UVV-compliant lashing rings, pivotable and lowerable, loadable in all directions and integrated into the outer frame—at corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not in rear bevel) * Widening boards positioned in centre of loading area * Excavator arm trough over rear axle to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at sides of excavator arm trough) * Single-piece hydraulic access ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofit of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar and access ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black Dodpfx Aljl Thxdo Hout * 235/75 R 17.5 twin tyres * Unladen weight 5,900 kg * Permissible gross weight of 30,000 kg technically possible * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.490 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, TRA-Kombi 18.0: * 3-in-1 solution: suitable for roll-off containers, skip containers, and as a low-loader ----Brakes: * EBS-E (electronic braking system) Dsdpfxewb Rake Al Hsut * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 t axles ----Suspension: * Air suspension with manual lowering at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrical / Lighting: * Tire pressure monitoring system (TPMS), display capability in truck via EBS signal (no truck-side installation required) * LED rear lights 12/24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel * Spare wheel carrier (basket type) on the right side * Closed side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * Foldable A-sign at the rear ----Loading Platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel deck with recessed rollers in the bogie area * Can transport roll-off containers with a container length of 5,500 – 7,000 mm * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the guide track * Transport of up to 2 skip containers with a max. volume of 10 m³ possible * Includes 8 repositionable bin stops for lateral centering of the skips, front 4 stops plug-in with pivoting stop * Weld bead as anti-slip coating in the ramp area of the track * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for securing with tensioning elements, 4 cloverleaf-type lashing brackets per side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t recessed lashing eyes per side in the outer frame ----Ramps: * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles and drawbar painted black ----Additional Information: * Load securing certificate according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egstorf

Stanje: novo, največja dovoljena obremenitev: 14.140 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, Dimensions and Weights Reference length outside approx. 6,896 mm Overall width approx. 2,500 mm Loaded driving height approx. 1,310 mm Roller conveyor length approx. 6,880 mm Wheelbase 5,100 mm Unladen weight complete 3,860 kg Permissible total weight approx. 18,000 kg Payload 14,140 kg Suitable for containers from 5,000 to 7,000 mm in length according to DIN 30722. Chassis Chassis with cross members, welded box-type longitudinal beams made of QSTE steel 4 container locks pneumatically operated Side underrun protection closed, according to RL 89/297/EEC Spare wheel carrier basket-type for 2 spare wheels incl. mounting kit for 1 Turntable Turntable 1300 FM including ball-bearing slewing ring 90/1300/22 (low-maintenance). Drawbar Drawbar 2600/1300/100/30 with height adjustment (draw spring with turnbuckle) Drawbar with DIN towing eye inner D=40mm, outer D=110, thickness 30mm Axles 2 x 9 t axles for 22.5'' disc brakes, make at manufacturer's discretion. Brake disc diameter approx. 430mm, wheel mounting via hub centering in accordance with DIN 74 361 Part 3. Brake System Air brake system to EU directive with Duomatic coupling head Conventional air suspension, EBS type 4S/3M, electronic braking system with ROLL Stability, twin-diaphragm spring actuators on the rear axle, release valve for separate release of the spring parking brake. Lighting System Djdpovynaasfx Al Hout Lighting system 24 Volt full LED according to RL 76/756/EEC with multi-chamber tail light and license plate light integrated into the light panel, make at manufacturer's discretion 1 x 15-pole connector 6 LED side marker reflectors with flashing function 2 LED marker lights white front 2 LED lane-hold lights separate rear-mounted 1 LED reversing spotlight Wheels/Tyres Regional transport tyres, 4x 385/55R22.5 (11.75x22.5) Steel wheels ET 120, Wheel nuts unpainted. Incl. tyre pressure monitoring system Underrun Protection Underrun protection made of aluminium. Two vertical delta impact protection profiles protect the rear during loading and unloading. Accessories 4 plastic mudguards, half-shell design, front and rear, single wheel mudguards 4 anti-spray mud flaps, neutral 1 lockable plastic toolbox 1 wheel chock with holder 1 license plate holder 1 "A" sign for the transport of waste materials 1 hanging net box Paintwork Chassis colour: MB 7350 Novagrau Wheel hub colour: black KTL Rim colour: RAL 9006 Silver Rear contour marking: red Side contour marking: white Closed SSE: RAL 7001 Silver grey Rear panel/light panels: RAL 7001 Silver grey Underrun protection: aluminium-anodised (silver) Locking hooks: yellow Documentation Commissioning and brake test protocol Operating manual Axle manufacturer's maintenance instructions Closed side protection device Hanging, galvanized net box EBB sticker DEKRA appraisal All information is provided without guarantee. Subject to errors. Prior sale reserved.

Stanje: novo, največja dovoljena obremenitev: 13.500 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, * TRA-Kombi 18.0: * 3-in-1 = for roll-off containers, skip containers, and as a low-loader ----Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS, display option in the truck via EBS signal (no installation required on the truck side) Dedpfxjl Thv Ro Al Hjut ----General Attachments: * Toolbox made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box made of galvanized sheet metal for container nets, approx. 960 x 300 x 400/450 mm, right side * Plastic bumper buffer at rear * Mechanical drop-down supports at rear ----Load Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Possible to transport roll-off containers with a length of 5,500–7,000 mm * Pneumatic four-point clamp locking as well as mechanical locking angles at the front in the track, securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. volume of 10 m³ possible * Includes 8 removable tub stops for lateral centering of the tubs; front 4 stops plugged in with pivotable stop * Weld bead as anti-slip coating in the ramp area of the run-up incline ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements to securely fix the tubs * 4 lashing bars per side, cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminium drive-on ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-wheeled and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight up to 20,000 kg technically possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from approx. calendar week 44 / 2026