Müller-Mitteltal Ra-T-Kombi 18,0 nakup rabljenega (60.038)

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – without truck-side installation * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors for total axle load display per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Straight rear steel mudflaps, each with spray suppression * Side underrun protection * Superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable folding lids (folding lids opening to the rear) * Chassis made from high-strength fine-grained steel * Floor over the bogie platform made of 50 mm softwood, and 60 mm softwood in the low loader platform * Outer planks of the drive-on ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, 1 pair each of 13.4 t lashing rings at the front and rear outer frame, 1 pair each of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame, 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front recess, 1 at the rear), 2 pairs of 6.4 t lashing rings on the excavator stick holder * 11 pairs of folding outriggers for a total width of 3 meters (not at the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening boards made of sheet steel, mounted transversely to the loading area in front of the first rear axle * Excavator stick holder above the rear axle up to the end of the approach slope approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 - 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area over the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loading height loaded approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop-down supports, and drive-on ramps galvanised * Axles, air tanks, and drawbar painted in black * Tires: 235/75R17.5 Crodpfx Aloxmpydj Hjb * Vehicle is galvanised * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 30.080 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool installed with pressure sensors for displaying axle group loads * Reflective contour tape on the sides and rear * LED beacon (removable) at the rear * 15-pin electrical connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front enclosed individual plastic mudguards * Rear straight steel mudflaps with spray suppression * Side underrun protection * Extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments with lockable folding lids (folding lids open towards the rear) * Chassis made from high-strength fine-grain steel * Floor over bogie platform made of 50 mm softwood, and in the low-bed platform made of 60 mm softwood * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t each at the front left and right on the main frame of the bogie platform; one pair of 13.4 t lashing rings at the front and rear sides of outer frame; one pair of 10 t lashing rings on each side foldable and lowerable, loadable in all directions, integrated into the side frame; 5 t bolted lashing rings on the outer frame of the wheel recesses (2 per front wheel recess, 1 per rear); 2 pairs of 6.4 t lashing rings at the excavator stick compartment * 11 pairs of fold-out outriggers for overall width of 3 m (not on the rear incline) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for width-extension planks, steel, mounted crosswise to the loading area in front of the first rear axle * Excavator stick compartment above the rear axle extending to the end of the ramp incline, approx. 2,300 x 740 x 190 mm * Two wheel recesses per side approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on bogie platform) for transporting wheel loaders with wheelbase 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulic extendable tip, approx. 4,650 x 720 mm * Hydraulic sideward ramp displacement * Loading area above the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded deck height approx. 890 mm ± 20 mm (including 860 mm ramp incline) * Chassis, bogie, fold-out outriggers, rear supports, and access ramps fully hot-dip galvanized * Axles, air tanks, and drawbar painted in black shade Codpexmpykjfx Al Horb * Tires: 235/75R17.5 * Vehicle is fully hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 08/1996, Leto izdelave: 1996, Oprema: ABS, = Additional Options and Equipment = - Electronic Braking System (EBS) = Remarks = Cedpfx Alext Sd Ee Hsrb Müller-Mitteltal Trailer ATL Roll-off trailer 2-axle Air suspension ABS Tyres 60% Information available in German We look forward to advising you Contract signing or vehicle collection at our dealership. Please arrange an appointment If you are unable to visit our dealership in person, we offer complete processing via telephone/email/WhatsApp/fax On request, we can deliver your new vehicle directly to your door This means best price for you, maximum security and convenience during acceptance We are happy to accept your used vehicle as part-exchange We offer the option of digital vehicle evaluation based on your vehicle photos even without a dealership visit Our specialised purchasing team offers you a guaranteed top price On request, we deliver your new used vehicle nationwide directly to your door, and collect your trade-in for financing or leasing Immediate approval and settlement of existing credit Your specialist partner for cars, transporters, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Over 400 vehicles permanently in stock The details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typing or data transmission errors. Listed equipment may need to be checked separately. Our offer generally does not include new TÜV approval; we are happy to make you a quote with our partner workshop. Subject to errors and prior sale = Additional Information = Unladen weight: 2,360 kg Payload: 10,640 kg Gross vehicle weight: 13,000 kg

Stanje: rabljeno, številka stroja/vozila: GE11/142/2022, lastna masa: 6.350 kg, največja dovoljena obremenitev: 17.650 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2008, dolžina tovornega prostora: 8.500 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, Zelo dobro ohranjeno vozilo iz prve roke Trosnažni nizkopodni priklopnik za prevoz Nizkopodni priklopnik z nakladalno rampo Prevoz težkih tovorov Tip T3 Komakt 30,0 Dolžina 8500 mm Širina 2500 mm Zračno vzmetenje Csdpfxsn Aw Hkj Al Hsrb Neto cena za trgovino/izvoz – 15.990 € Pridržujemo si pravico do sprememb, vmesne prodaje in napak ===== Telefon2 Mobilni telefon =====

Stanje: novo, največja dovoljena obremenitev: 11.050 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-Loader Three-Way Tipper Trailer with Ramps * NEW VEHICLE * Available mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible * Reference number for inquiries: 30505 * Remote diagnosis unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator activation * GVW: 14,400 kg, payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, drop side panels, laser-welded, pendulum-mounted, fold-down and removable, prepared for later retrofitting of side wall extensions * Lockable compartment under the tipping bridge for access ramp * Incl. 1 pair of aluminum loading ramps, 8t/pair, 3.57m * Galvanized chassis, galvanized front wall * 4 UVV lashing rings LC 5,000daN at front and rear + 8 recessed and foldable lashing points LC 3,000daN in tipping floor (centered) * Hardwood excavator bucket rest * Two-step access in front of the front wall (galvanized) * Stepless height-adjustable drawbar, galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, rear staking posts bolted, galvanized * Extension cables for rear side panel Cedpfx Ajyvxg Iel Horb * Plastic toolbox on right chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire-purchase price: for example, €549 per month over 60 months, no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment available * Request an offer from us! * We are Müller-Mitteltal trading partners * Free delivery to your site possible with timely order! ----Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of these hours by appointment We speak German, English, Polish, and French. Whatsapp

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalizer * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign kits at the front and rear * Front: closed plastic mudguards, rear: straight galvanized steel mud flaps, each with splash guards * Contour marking tape, reflective, on sides and rear * Foldable (hot-dip galvanized) tool box cover on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * Four stake pockets each side (no stakes included), also suitable for lashing * Load securing package consisting of: 2 lashing points (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame (13.4 t in corners, otherwise 10 t) * 6 pairs of mechanical folding outriggers for total width of 3 m (not in the rear slant) * Widening planks stored in the center of the loading area * Excavator arm support over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm support) * Mechanical one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically adjustable lateral ramp displacement * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Csdpfx Alox Ipa Nj Hsrb * Unladen loading height approx. 910 mm (including 860 mm approach incline) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Gross technical weight of 30,000 kg possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle compensation * Side underrun protection * Rear swivel supports on chassis frame Credpfjx Ipavsx Al Hjb * Mechanically adjustable warning panel sets front and rear * Front closed plastic fenders and rear straight galvanized steel skirts, each with splash protection * Contour tapes on sides and rear, reflective * Hinged lid (hot-dip galvanized) for tool box in the bogie platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Tow bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (no stakes present) with simultaneous lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant lashing rings - swiveling and retractable, loadable in all directions and integrated in the outer frame – 13.4 t at the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on rear taper) * Widening planks stored in the center of the loading platform * Excavator arm rest over rear axle up to the rear cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings fitted laterally in the arm rest) * Mechanically operated one-piece loading ramps with spring assembly (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, bogie, tow bar, and loading ramps hot-dip galvanized * Axles, springs, air tank, etc., painted in black * 235/75 R17.5 twin tires * 5,900 kg curb weight * --Permissible total weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 30.700 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2002, Oprema: ABS, * MüllerMitteltal nizkopodni priklopnik s 4 osmi T40 * 2x krmiljeni vrtljivi osi * Nemška prikolica * pero * hidravlično pomične rampe / levo-desno * deljene preklopne rampe * možnost razširitve * ABS * BPW osi * 40 t Csdpfx Aljyuri Ee Hjrb * lastna teža: 9300 kg * osne obremenitve = 10 t na os * popolnoma funkcionalen * pnevmatike v redu

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11t Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front: closed plastic mudguards; Rear: straight, galvanized sheet steel skirts, each with spray protection * Reflective contour tape on the sides and rear * Tool box made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for tool box within the turntable platform * Multi-voltage wiring * LED tail lights * Rear warning beacon (detachable) * Drawbar with 50 mm draw eye and height adjustment via tension spring & turnbuckle * 15-pin electrical socket * Four stake pockets per side (stakes not included), also usable as lash points * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-certified lashing rings, swiveling and retractable, loadable in all directions, recessed into the outer frame; corner rings: 13.4 t, other rings: 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not at the rear slope) * Widening boards stored at the center of the load floor * One-piece, hot-dip galvanized hydraulic access ramps (approx. 3,000 x 720 mm), manually adjustable sideways * 4-way valve block for hydraulic side ramp retrofit * Platform above turntable: approx. 1,960 x 2,520 mm * Unladen platform height: approx. 1,070 mm * Rear platform: approx. 6,500 x 2,520 mm * Unladen platform height: approx. 910 mm (incl. 860 mm drive-on angle) * Chassis, turntable, drawbar, and access ramps hot-dip galvanized * Axles, springs, air tanks, and related components painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight Credpfxsl Th I Ae Al Heb * Permissible total technical weight: 30,000 kg * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system Credpfx Alel Tik Ne Heb * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting/lowering system and RtR valve * Smard board for payload weighing * Warning sign kits, front and rear * Reflective contour tape on the sides and rear * Removable rotating beacon (rear) * LED lighting * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and basket-type spare wheel holder, mounted right side * Front: closed single plastic mudguard * Rear: straight steel mudguards, each with spray suppression * Side underrun protection * Bogie platform extension by 520 mm with 45° corners, 3 integrated lockable storage compartments with lids * Chassis made of high-strength fine-grained steel * 50 mm softwood floor over bogie platform, 60 mm softwood on low-bed platform * Outer rails on ramps made of hardwood * 4 stake pockets per side (no stakes included); 2 t lashing possible at each * Load securing package: 2 lashing eyes (6.4 t) front left/right on main frame of bogie platform * 2 pairs of lashing rings (13.4 t) on outer frame front/rear per side; 4 pairs of lashing rings (10 t), swing-out and lowerable per side (front/rear) * All lashing points loadable in all directions and recessed into outer frame * 2 pairs of lashing rings (6.4 t) in excavator arm rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not at rear slope) * Extension planks stored left side in a storage box * Excavator arm rest above rear axle to end of rear slope, approx. 2,100 x 740 x 190 mm * Rear mechanical fall supports * Hydraulic folding ramps with hydraulically adjustable ramp tip, approx. 4,650 x 720 mm, incl. hydraulic lateral ramp adjustment & load-holding valve * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded approx. 890 mm, +/-20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, bogie, ramps, outriggers and mechanical fall supports hot-dip galvanized * Axles, drawbar, air reservoir and turntable in black finish * Tires: 235/75 R 17.5 * New vehicle, no initial registration, manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 30.740 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lowering system and RtR valve * Smard board for load weight determination * Warning sign packages front & rear Crsdel Tphrepfx Al Heb * Reflective contour marking tapes on sides and rear * Rotating beacon (removable) at rear * LED lights * Straight drawbar with 50 mm towing eye and continuously adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, right-hand side * Closed single plastic mudguards at front * Straight rear steel splash guards, each with spray suppression * Side underrun protection * Turntable platform front extension by 520 mm with 45° corners and 3 flush storage compartments with lids, lockable * Chassis made of high-strength fine-grained steel * Decking above turntable platform: 50 mm softwood, in low-bed platform: 60 mm softwood * Outer planks of access ramps: hardwood * Each side features 4 stake pockets (stakes not included), with simultaneous 2 t lashing points * Lashing package includes: 2 lashing rings 6.4 t, front left and right on main frame of turntable platform * On sides, front & rear, 2 pairs of 13.4 t lashing rings on outer frame; sides each with 4 pairs of 10 t lashing rings, pivoting & lowerable * Loadable in all directions, recessed in the outer frame * 2 pairs of 6.4 t lashing rings on the excavator stick rest area * 8 pairs of galvanized folding outriggers for 3 m overall width (not in the rear slope) * Extension planks stored left side in a stowage compartment * Excavator stick rest above rear axle to rear slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports, rear * Hydraulic folding ramps with hydraulic tip section approx. 4,650 x 720 mm including lateral hydraulic ramp shift & load holding valve * Load area over turntable: approx. 2,990 x 2,520 mm * Rear load area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm drive-on slope) * Flow divider installed * Chassis, turntable, ramps, outrigger arms, and mechanical rear supports hot-dip galvanized * Axles, drawbar, air reservoir, and turntable painted in a black tone * Tires: 235/75 R 17.5 * New vehicle, not previously registered, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 23.940 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T3 Profi 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes Credpfol Th Nnox Al Hsb * 3 x 11 t Gigant axles * Parabolic springs, mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Tool box made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 50 mm towing eye and height adjustment via drawbar spring & turnbuckle * 15-pin electrical plug * Four stake pockets on each side (no stakes included), with integrated lashing option * Load securing package consisting of: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t. * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Hot-dip galvanized one-piece hydraulic ramp (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-section control valve block for retrofitting hydraulic side ramp shifting * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen: approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical gross vehicle weight of up to 30,000 kg possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 11/2026

Stanje: rabljeno, največja dovoljena obremenitev: 17.500 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2005, naslednji pregled (TÜV): 01/2027, širina tovornega prostora: 2.500 mm, ? Hidravlične rampe ? Razširljive ? 8 pritrdilnih ušes na vsaki strani Crodpfxsytz Hwe Al Hob ? Nosilec za rezervno kolo ? Nakladalna višina: ca. 930 mm ? Bobnasta zavora ? Duomatski priključek ? Listnato vzmetenje ? Dvojna kolesa Vse informacije brez jamstva / Možen vmesni prodaj.

Stanje: rabljeno, največja dovoljena obremenitev: 5.900 kg, skupna masa: 9.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2020, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, prostornina tovornega prostora: 5 m³, Oprema: ABS, * ABS * 5-komorna zadnja svetla * Podesivi vučni uređaj po visini * Gigant osovine Cjdpfxeyncyhj Al Hjrb * Prednji oslonac na navijanje ----Nadgradnja: Niskopodni prikolica, približna visina utovara 870 mm, zadnji deo zakošen, visina uspona približno 780 mm, opružno rasterećene čelične stranice levo i desno, drveno dno, prstenovi i ušice za vezivanje. Opružno rasterećene i bočno pomične rampe za uspon sa vatrootpornim i protivkliznim rešetkastim prečkama od pocinkovanog čelika (dužina cca 2.600 mm), automatska zadnja podrška povezana s upravljanjem rampama, plastična kutija za alat ispred prednjeg zida. Šasija/prednji zid/vučno vratilo/zadnji zid/rampe i stubići pocinkovani. Prodaja isključivo pravnim licima. KOD IZVOZA SE PLAĆA SAMO CENA BEZ PDV-A!!!!! SVE INFORMACIJE BEZ GARANCIJE, POSEBNO OPREMA I DODACI. Osnov za sve kupoprodajne ugovore, fakture, profakture, narudžbine i prodajne razgovore su naši Opšti uslovi poslovanja (vidi Impressum).

Stanje: rabljeno, največja dovoljena obremenitev: 29.750 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2010, naslednji pregled (TÜV): 05/2026, Mera-B 11.750 mm Lastna teža 10.250 kg Credpexpmmmofx Al Hsb Obremenitev osi 2 x 10.000 kg Nakladalna dolžina nad vrtečo ploščo 2.400 mm vklj. 350 mm poševnine Nakladalna dolžina 7.700 mm vklj. 900 mm poševnine Višina nalaganja 880 mm Širina 2.550 mm, razširljivo na 3.000 mm Utornica za odlaganje izkopalnega kraka (DxŠxV cca 2.500 x 740 x 180 mm) SAF osi z zračno vzmetenjem 2-delne hidravlične rampe, 2.100 mm + 2.000 mm dolge, 650 mm široke vklj. Rampe hidravlično nastavljive Hidravlična podpora zadaj Izsek za kolo za drugo osjo Izsek za sprednje kolo, zgoraj dolžina cca 2.000 mm x 1.100 mm, spodaj globina cca 350 mm Izseki za kolesa med 3. in 4. osjo Izsek za zadnje kolo, zgoraj dolžina cca 1.300 mm x 550 mm, spodaj globina cca 220 mm

Stanje: novo, največja dovoljena obremenitev: 10.970 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, KA-TA-R 14.4 - LKW tandem trostrani kiper - Nosivost serijski cca: 11.050 kg - Povećanje ukupne dozvoljene mase na 14,4 t kod guma 285/70R19.5 - Unutrašnje dimenzije: 5.000 x 2.420 x 500 mm - Visina poda pod opterećenjem: 1.040 mm - 1 šasija sa zaštitom od podletanja, vruće pocinkovana - Lakiranje: osovine sa oprugama, vazdušni rezervoari itd. u crnoj boji - 3 para upuštenih i preklopnih veznih kuka u čeličnom podu, LC 3.000 daN - ABS 2S/2M, 24 volti Credpsxmwiyofx Al Hsb - 2 podizne opruge za čelične bočne stranice visine 500 mm - 1 centralno zaključavanje levo i desno, njihajuće kod nepreklopnih bočnih stranica Dodatna oprema: 1 par UVV veznih prstenova upuštenih u čelični pod, umesto na čelični pod 1 čelični pod od Hardoxa 450, debljine 4 mm Podešavanje visine vučne ruke preko ugaonog prenosa sa ručnim pogonom umesto serijskog 1 par alu rampi bez ivica (8,0 t/par), 3.500 x 400 x 105 mm pogodno za pneumaticima i guseničarima Kutija za alat

Stanje: rabljeno, največja dovoljena obremenitev: 22.000 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, Oprema: ABS, Vehicle identification number: WMM0000080052540 STRAIGHT LOADING PLATFORM Container locking device Unladen weight: 8,000 kg Crjdpfxstuhv Rj Al Hsb German roadworthiness test (HU): due Gigant axles with drum brakes Air suspension Platform dimensions: 9,400 mm – Loading height: 880 mm – For further measurements see image No. 4 Extendable to 3,000 mm with lighting Drawbar – 50 mm Hydraulic ramps, split – Length: 2,600 + 1,600 mm – Width: 650 mm Support legs Tyres: 235/75 R 17.5 Subject to prior sale, modifications, and errors. This description serves for general identification of the vehicle only and does not constitute a warranty in the legal sense. The details specified in the sales contract are binding. Our offer generally does not include a new roadworthiness test (TÜV). If a new inspection is required, we will be happy to provide an offer from our partner workshops. Vehicle may feature advertising decals and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 14.900 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 02/2010, naslednji pregled (TÜV): 05/2025, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 1.300 mm, Leto izdelave: 2010, Oprema: ABS, MÜLLER MITTELTAL RA18 Trailer for Swap Containers with External Rollers 5,500 mm – 7,000 mm, German trailer, second owner Technical Data Suitable for containers with external rollers, internal length 5,500–7,000 mm, for rear loading. Dimensions: - Gross weight: 18,000 kg - Unladen weight: approx. 3,100 kg - Payload: approx. 14,900 kg - Overall length: approx. 9,400 mm - Overall width: 2,550 mm - Tyres: 385/55R22.5, approx. 40–70% tread Features: - ABS/EBS connection according to ISO 7638 (5- or 7-pin) - Chassis main frame with raised outer rails for container guidance, hot-dip galvanized - Container locking: The roll-off container is secured at 4 points by 2 pneumatic clamping units. After sliding on the container, the 4 securing claws are closed by activating a valve, clamping the container to the chassis frame. To the front, the container is additionally secured by 2 insertable lock parts (with holders), which can be positioned at various points along the guide rails. - 2x 9t BPW 420 mm drum brake axles with air suspension - Air suspension with lowering function - Frame: welded steel construction - Brake system: two-line EBS-compliant (EU standard) - DUOMATIC coupling head - Spring-loaded parking brake - Electrics: 24 volts - Multi-chamber rear lights - 15-pin plug with connecting cable - Lighting according to EU regulations - Rims: factory silver - Underrun protection: aluminum profiles - Wheel chocks with holders - 1/2 shell plastic mudguards - Toolbox (approx. 800x300x500 mm) Crodpfx Aevg T Nyel Hob Condition commensurate with age and mileage! Delivery available at extra cost All information subject to change! Sale to businesses or for export only! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak: German, Czech, Polish, Romanian, Russian, English

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive Crjdpfxjw Tgkbo Al Hob * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 * Tehnični pregled do: 02/2026

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * ETÜ - TA -R 14.4 ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating aggregate ----Drawbar / Drawbar Eye: * Drawbar adjustable in height by 300 mm – drawbar extension by 250 mm to 2,250 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at rear ----General Attachments: * Support winch in front * Externally mounted hot-dip galvanized folding supports at rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right, outside at the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Preparation in front of front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Sidewalls made of trapezoidal profile steel sheet, foldable with drop-side spring-assisted lifting device * Steel rear wall can be slid between the ramps – storage bracket for unused rear wall inside by the front wall * Rear stanchions bolted * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strips on the inside of ramps * 12 mm thick and 210 mm wide rubber strips on the approach slope and externally on the low-bed platform (from front wall to end sill) ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings every 600 mm possible * 1 x 6.3 t lashing ring at each front and rear corner * Various drill holes in front wall and end sill for 1.2 t lashing options ----Ramps: * One-piece mech. grating ramps with spring system for one-man operation, approx. 2,750 x 870 mm (can be compressed to 20 mm) ----Paintwork: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tank, and flanged drawbar eye painted black * Sidewalls painted RAL 9010 pure white ----Info: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- Crodox Ipapjpfx Al Hsb * Errors and prior sale excepted * New vehicle with manufacturer’s warranty ----Delivery time: Vehicle is immediately available

Stanje: novo, največja dovoljena obremenitev: 10.500 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2026, * First inspection (ETÜ) - TA -R 14.4 ----Brake System: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar by approx. 300 mm - drawbar extension by 250 mm to 2,250 mm total length * 40 mm flange-type towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * 15-pin electrical connector * LED rear lights 12 / 24 V * Removable LED beacon at rear ----General Attachments: * Landing leg at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, externally mounted on the front right end wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Preparation in front of the bulkhead for later installation of container locks * Bolted smooth steel bulkhead * Foldable steel side walls with trapezoidal profile, with drop-side spring assist * Removable steel rear wall, stowable inside at the front of the bulkhead when not in use * Bolted rear stanchions * Rear ramp bevel approx. 860 mm ----Flooring: * 50 mm softwood flooring * 12 mm thick and 270 mm wide rubber strips on the inside of the loading ramps * 12 mm thick and 210 mm wide rubber strips on the ramp bevel and on the exterior of the low loader platform (from front bulkhead to rear cross member) ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various drillings in the front and rear cross members for 1.2 t lashing options ----Ramps: * One-piece mechanical grating ramps with spring assistance for single-person operation, approx. 2,750 x 870 mm (collapsible to 20 mm thickness) ----Paint Finish: * Chassis, drawbar, front wall, tailgate, and ramps hot-dip galvanized * Axles, springs, air tanks, and flange eye painted in black * Side walls painted in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL, including load securing certificate * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: Credpfx Aex Ipbasl Heb Vehicle is immediately available ex Eggerstorf

Stanje: novo, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, Oprema: ABS, dvižna zadnja plošča, Müller-Mitteltal KA-TA-R 11.9 Tandem Low-bed Three-way Tipper Trailer with Ramps Reference number for inquiries: 11612 * BRAND-NEW VEHICLE, available immediately, painted in RAL 9016 traffic white * Delivery to your site possible for an additional charge! * Gross weight: 11,900 kg, payload: 8,750 kg * Galvanized floor, 5m x 2.42m x 0.5m; side walls are pendulum-mounted, foldable, and removable; prepared for later fitting of side wall extensions * Bulkhead is hot-dip galvanized * Lockable compartment under the tipping bed for loading ramps * Includes access ramps, 3.31m, 8t pair * 4 UVV lashing rings LC 5000daN at front and rear * 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Net hooks * Drawbar infinitely height-adjustable, hot-dip galvanized, tow eye 40mm * Frame galvanized * Tyres 235/75R 17.5, (4 units), BPW axles, parabolic springs * Tire pressure monitoring * EBS (Electronic Braking System) * LED lighting system for 12+24 volts * Side marker lights with indicator activation * Bolted, galvanized rear stanchions Cedpfx Asyl Ebpjl Herb * Excavator bucket rest mounted on the bulkhead ---- Please request an offer from us. Additional equipment available on request. Financing from as little as €405 net/month over 72 months with no down payment and no final balloon payment. Offer provided by our financing partner "FM LeasingPartner". ---- Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Appointments outside opening hours possible by arrangement. WhatsApp Leasing, financing, and trade-in available----

Stanje: rabljeno, lastna masa: 2.910 kg, največja dovoljena obremenitev: 7.590 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 09/2009, naslednji pregled (TÜV): 04/2025, dolžina tovornega prostora: 4.500 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 450 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: modra, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing rings, underrun protection, front support, rear support, swinging tailgates. Crsdpsv S H Sfefx Al Hsb Body: Tandem 3-way tipper trailer with ramp recess. Loading ramps available at an extra cost from €900 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Brake System: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm up to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: Cjdoq Dyvyopfx Al Hsrb * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Trapezoidal-profiled, fold-down steel side walls with drop-side spring assists * Steel rear wall, can be stowed between the ramp holders when not in use, inside in front of the bulkhead * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load Securing: * Perforated outer frame, edged at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t fold-down lashing rings possible every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes for 1.2 t lashing options in bulkhead and rear crossmember ----Ramps: * One-piece mechanical grating drive-up ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible down to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and drive-up ramps * Side wall color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost ----Info: * — Reinforced and certified body according to EN 12642 XL including load securing certificate — * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-R 14.4 ----Braking System: * EBS Electronic Braking System * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow Bar / Flange Towing Eye: * Height-adjustable tow bar, adjustable by 300 mm * Tow bar extension by 250 mm to a total of 2,250 mm Cedpfx Alopk Dv Ro Hsrb * 40 mm flange towing eye ----Lighting / Electrics: * Tire pressure monitoring system (TPMS) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the headboard * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the headboard for retrofitting container locks * Bolted headboard made of smooth sheet metal * Trapezoidal profiled drop-side walls made of steel, foldable with drop-side spring assist * Steel rear wall insertable between ramp mounts; when not in use, stowed inside in front of the headboard * Bolt-on rear posts * Rear approach angle approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Possible installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing point in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) ----Painting: * Hot-dip galvanized chassis as well as tow bar, headboard, rear wall, tailgate, and ramps * Side wall color RAL 9010 pure white * Painting of side walls in a RAL color of choice available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately ex works Egestorf