Müller-Mitteltal 3 Seitenkip.- Strongw., 10 To Rampen nakup rabljenega (53.590)

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards Gjdpfx Afsrwc R Aj Uobu ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, konfiguracija osi: 3 osi, vzmetenje: parabolično listje (vzmet), velikost pnevmatike: 235-75R17.5, Leto izdelave: 2014, GOVORIM RUSKO – Jurij, mobil: 3-osni prikolica z nizko nosilnostjo, dostopna od zadnje strani. Dovoljena skupna masa 30.000 kg, nosilnost 23.650 kg. Nosilna površina 8.400 mm (6.500 + 1.900) x 2.550 mm, zložljiva razširitev na 3.000 mm, opozorilni paket za preseženo širino, nosilec za roko bagra. 20 pritrdilnih točk in 8 žepov za pritrdilne palice, ki omogočajo istočasno pritrditev, 2 orodjarni omari. Hidravlične rampe, približno 3.000 x 720 mm, z gumijasto oblogo. Osnovne osi Gigant, sistem EBS, vzmetenje s paraboličnimi vzmetmi, pnevmatike 235-75 R 17.5. Priklopna vilica je upognjena, priklopna zatič 50 mm. 2-žični zračni sistem (Duomatik), 2-žični hidravlični sistem, 24 voltov. Višina nakladalne površine prazne prikolice, približno 910 mm. Barva: zelena. Tehnični pregled veljaven do 06-2027. = Dodatne informacije = Dimenzija pnevmatik: 235-75R17.5 Vzmetenje: parabolično vzmetenje Gsdpfx Afezkpvgo Uebu Lastna teža: 6.350 kg Nosilnost: 23.650 kg Dovoljena skupna masa: 30.000 kg Država proizvodnje: DE Za dodatne informacije se obrnite na Jana-Marca Schwickerta.

Stanje: rabljeno, skupna masa: 47.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2004, naslednji pregled (TÜV): 08/2026, * Müller Mitteltal TS3 nizkopodni polpriklopnik * Prva registracija: 11/2004 * 3 osi * Zračno vzmetenje * Gigant osi * Hidravlične dolge rampe, pomične in zložljive * Razširitve iz 2,50 m na 3,0 m širina nakladalnega prostora * Nakladalna dolžina: 8,50 m pri nakladalni višini 0,85 m * Nakladalna dolžina na vratu: 3,40 m pri nakladalni višini 1,50 m * Podpore * Neto teža: 10.260 kg * Tehnično dovoljena skupna masa: 47.000 kg * TÜV veljaven do: 08/2026 Gbedpfx Aew Tgkbef Ueu * Tehnični pregled do: 02/2026

Stanje: rabljeno, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 08/2023, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Oprema: garancija za rabljena vozila, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3000.31 Permissible total weight: 3,000 kg Payload: 2,130 kg Unladen weight: 870 kg Box dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading height: 750 mm Gbjdpfjxyulfex Af Usu Load area hydraulically tiltable via hand pump and electric pump Tipping angle rear: 42°, side: 50° With leaf grate extension/steel mesh side panels, 600 mm high, pendulum-type on all four sides Incl. aluminium loading ramps and 2 x support legs Due to business closure the trailer was repurchased. It is in as-new condition and has only been used approx. 3 times. - V-drawbar, hot-dip galvanised - Chassis and tipping frame, hot-dip galvanised by immersion - Tipping body made from one-piece steel construction - 4-stage hard-chromed tipping cylinder - Hand pump; from 3,000 kg permissible total weight, electric pump with hand pump - 13-pin plug and reversing light - Aluminium side walls, 350 mm high, fully removable - Rear tailgate can be swung - 6 lashing rings fitted to the bridge floor, lashing capacity 800 kg per ring, Dekra certified - Jockey wheel - Plank compartment pre-installed for easy retrofitting of aluminium planks Price includes vehicle registration documents (Registration Certificate Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. Upon request, we can provide a free temporary registration number plate. We repair trailers of all brands. Further accessories available on request. Technical modifications, price changes and errors excepted. We accept no liability for mistakes or typographical errors. Reversing automatic, rubber suspension axle, independent suspension, tiltable load area, jockey wheel, marker lights, chassis and tipping frame hot-dip galvanised by immersion, braked, V-drawbar hot-dip galvanised by immersion, tipping body made from one-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight electric pump with hand pump, 13-pin connector and reversing light, aluminium side walls 350 mm high, fully removable, rear flap can be swung, 6 lashing rings fitted to the bridge floor (lashing capacity 800 kg per ring, Dekra certified), plank compartment pre-installed for easy retrofitting of aluminium planks.

Stanje: novo, lastna masa: 643 kg, največja dovoljena obremenitev: 2.025 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 2.670 mm, širina tovornega prostora: 1.500 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 1,6 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.680 mm, Manufacturer: Humbaur Type: 3-Way Tipper HTK Alu 2700.27 Permissible total weight: 2700 kg Payload: 2025 kg Unladen weight: 675 kg Bed dimensions: 2670 x 1500 x 350 mm Tyres: 13-inch Loading height: 725 mm Load platform hydraulically tipable via manual pump Tipping angle: rear 45°, sides 50° - V-drawbar, hot-dip galvanized - Chassis and tipping platform hot-dip galvanized - Tipping platform made of one-piece steel - 4-stage hard-chrome tipping cylinder - Electric pump with emergency hand pump - 13-pin connector and reversing lights - Side panels made of powder-coated, galvanized steel, fully removable - Rear tailgate can be swung - 6 lashing rings mounted on the bed, each with 800 kg load capacity, Dekra certified - Jockey wheel - Lashing trough preinstalled for optional aluminum floor inserts – easy to retrofit Price includes vehicle registration documents (registration certificate Part II and COC papers). We stock a wide range of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. You can request a free temporary number plate for transport. We repair trailers of all makes. Additional accessories available on request. Godperi Tb Ajfx Af Uobu Technical modifications, price changes, and errors excepted. We accept no responsibility for mistakes or typographical errors. Features: reversing automatic brake, rubber suspension axle, independent wheel suspension, tipper bed, jockey wheel, marker lights, galvanized steel panels, braked, includes warranty, V-drawbar hot-dip galvanized, chassis and tipper platform hot-dip galvanized, single piece steel tipper platform, 4-stage hard-chrome tipping cylinder, manual pump, from 3000 kg permissible total weight with electric pump and manual pump, 13-pin plug and reversing lights, powder-coated fully removable side panels, swing rear tailgate, 6 lashing rings mounted in bed rated to 800 kg each (Dekra certified), preinstalled trough for easy retrofitting of aluminum floor inserts.

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs Godpfx Ajrczm Djf Uobu * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning plate sets front & rear * Contour tape on sides and rear, reflective * EBS multi-voltage system for 12 & 24 V electrical systems * Removable LED beacon rear * 24 V - 15-pin and additional 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye, continuously height-adjustable * Powder-coated steel toolbox and spare wheel holder, basket design, right side * Front closed single plastic mudguards * Rear straight steel mudflaps, each with spray suppression (anti-spray) * Side underrun protection * Extended offset bend by 500 mm to the front * Turntable platform extension at the front by 520 mm with 45° corners and 3 integrated lockable storage compartments with covers * Chassis made from high-strength fine-grained steel * Decking above turntable platform from 50 mm softwood and on low loader platform from 60 mm softwood * Outer planks of loading ramps made from 50 mm bamboo wood * Four stake pockets per side (but no stakes included), each with a 2 t lashing point * Load securing package comprising: 2 lashing eyes (6.4 t) front left and right on the main frame of the turntable platform; front and rear, one pair of lashing rings (13.4 t) each on outer frame; four pairs of swivel and lowerable lashing rings (10 t) per side, loadable in all directions and integrated in the outer frame; two pairs of lashing rings (6.4 t) per side in excavator stick recess; eight pairs of galvanized folding outriggers for 3 m total width (not on the rear slope) * Widening planks stored on the left side in stowage compartment * Excavator stick recess above rear axle up to end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports rear * Hydraulic, hot-dip galvanized loading ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp movement on slide pipe from ramp shaft * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded deck height approx. 860 mm (including 860 mm approach slope) * Chassis, turntable, loading ramps and mechanical folding supports rear hot-dip galvanized * Axles, springs, air tanks and turntable painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering device ----Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye, height-adjustable by 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * LED tail lights 12/24 Volt ----General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * Reinforcement package on chassis for drilling rig transport * 50 mm softwood floor, clamped type * Preparation in front of front wall for retrofitting container locks * Bolted smooth plate front wall * Split steel side walls – trapezoidal profile – foldable with central folding stanchion * Steel rear wall slide-in between ramps – bracket for storage in front wall when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45-degree angled, with 2 t lashing force every 480 mm * Option for installation of 3 t drop lashing rings every 600 mm * Lashing package: 1 x 10 t UVV lashing ring in each front and rear corner, 2 x 8 t UVV retractable lashing rings each side in the outer frame, various holes for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * One-piece slide-in ramps 12 t/pair, ramps approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ----Loading Height: Gjdpfx Afjmi Tmae Uebu * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, rear flap, folding supports and access ramps hot-dip galvanized * ---Axles, air tanks, flange towing eye and landing leg painted in a shade of black--- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 4.500 kg, skupna masa: 6.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/1979, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 4.000 mm, širina tovornega prostora: 1.900 mm, višina nakladalnega prostora: 380 mm, skupna širina: 2.500 mm, skupna višina: 3.000 mm, Leto izdelave: 1979,

Stanje: novo, lastna masa: 1.550 kg, največja dovoljena obremenitev: 1.950 kg, skupna masa: 3.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 6.160 mm, širina tovornega prostora: 2.300 mm, višina nakladalnega prostora: 1.880 mm, prostornina tovornega prostora: 27,1 m³, barva: črn, gradbena višina: 2.690 mm, delovna širina: 2.500 mm, Oprema: kabelska vitla, Manufacturer: Brian James Trailers Model: Car Transport Trailer Race Transporter 7, RT7, 397-6023-35-3-10-B GVWR: 3,500 kg, triple axle Payload: 2,050 kg Unladen weight: 1,450 kg Body dimensions: 6,160 x 2,300 x 1,990 mm (1,890 mm) Tyres: 195/55 R10C, black alloy wheels Loading height: 610 mm, with electrically operated hydraulic tilting deck and additional ramps Color: black RT 7 is in stock and available immediately Includes spare wheel, fully mounted Includes anti-theft device - Electric hydraulic tilt function - Numerous lashing points - Double wing doors on both sides - Front hatch doors on both sides - Load bed with perforated steel lashing tracks - 4 x red wheel tie-down straps for 3-point securing - Electrically operated tailgate ramp - Adjustable wheel chocks - Daylight roof - 12V electric winch with on-board battery and sliding rail - V-drawbar, hot-dip galvanized - 13-pin plug and reversing lights - Heavy-duty jockey wheel - Heavy-duty AL-KO running gear with sealed bearings - Includes anti-theft device - Includes spare wheel - 5-year chassis warranty Including following options: - Folding auxiliary ramps for extremely low vehicles Standard features: - Black wheel chocks, coupling lock, spare wheel - Side opening doors, front hatch doors - Electric tilt function and electric tailgate with remote control - Daylight roof - Heavy-duty jockey wheel - Perforated steel deck surface - Adjustable 55 mm wheel chocks - All exterior lighting LED - LED loading lights at rear top of vehicle - Additional LED reversing lights (mounted on sides) - Center floor storage boxes incl. lids - Red wheel tie-down straps (x4) - LED interior lighting - Electric winch Price includes vehicle registration documents (Registration Certificate Part II and COC papers) Electrically operated tailgate: Operation via industry-unique actuator with remote control key, or alternatively through the electronic control unit. Electric tilting function: The electric tilt function provides an easy, low loading angle. Powered by on-board battery. Electronic control module: Controls for tilt function and tailgate, as alternative to the key fob. Includes an indicator showing battery charge status. Electric winch: Electric winch with synthetic rope and wireless remote. Synthetic rope is lighter and causes less damage to hands and bodywork than conventional steel cable. LED interior lighting: LED strip lighting provides a bright, friendly working environment. LED work lights at rear: Godex Iv Iyopfx Af Ujbu Rear-facing LED work lights at the upper rear ensure better visibility when loading/unloading at night. Additional reversing lights: Extremely bright LED reversing lights on the trailer sides simplify manoeuvring in the dark. Floor storage boxes: Floor storage boxes with spring-assisted composite lids for ideal storage of heavy, bulky items. Side doors: Wide double side doors provide convenient access to the loading area. The double doors allow easy access, can be opened individually, and are ideal for tight spaces. Low wheel chocks: Ideal for vehicles with low ground clearance. 55 mm high. Fully adjustable wheel chocks with rapid adjustment system, easily clipped directly into the trailer chassis.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Further information New: No Gedpfxjzwa Ime Af Ujbu

Stanje: rabljeno, največja dovoljena obremenitev: 23.900 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2007, Leto izdelave: 2007, Notranja št. vozila: G400178 Na voljo takoj na našem dvorišču v Kaufungenu VEČ INFORMACIJ: Luis Lucena Viktoria Sologubova NEMŠČINA Müller-Mitteltal TS2 KOMPAKT prikolica za težke tovornjak ? 2 osi ? hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Prikolica z 2 osmi ima hidravlične rampe, zračno vzmetenje in nosilnost 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnični podatki: * Št. vozila: G400178 * Stanje vozila: Rabljeno vozilo * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Letnik: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemško vozilo Oprema: * Hidravlične rampe * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja je možen po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. ANGLEŠČINA Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 osi – hidravlične rampe Robustna prikolica Müller-Mitteltal TS2 KOMPAKT, izdelana leta 2007. Ta dvooksna prikolica je opremljena s hidravličnimi rampami za nakladanje, zračnim vzmetenjem in nosilnostjo 23.900 kg. Z dovoljeno skupno maso 31.000 kg je še posebej primerna za transport težkih gradbenih in delovnih strojev. Tehnične specifikacije: * Referenčna številka: G400178 Gbedpfozahg Dsx Af Uou * Stanje: Rabljeno * Kategorija: Prikolica za težke tovornjak * Proizvajalec: Müller-Mitteltal * Model: TS2 KOMPAKT * Prva registracija: 06/2007 * Leto izdelave: 2007 * Osi: 2 * Dovoljena skupna masa: 31.000 kg * Lastna teža: 7.100 kg * Nosilnost: 23.900 kg * Skupna dolžina: 10.800 mm * Nemška prikolica Oprema: * Hidravlične rampe za nakladanje * Zračno vzmetenje * Dvooksna šasija * Robustna konstrukcija prikolice za težke tovornjak Ogled in preizkus delovanja sta možna po predhodnem dogovoru. Dodatne informacije, fotografije in videoposnetke lahko dobite na zahtevo. Pridržujemo si pravico do sprememb, napak in predhodne prodaje. Pridržana pravica do sprememb. Z veseljem sprejmemo vaše rabljeno vozilo v plačilo. Financiranje je mogoče neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel Gedpfxexf Skvo Af Usbu ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * KA - TA - R 11.9 ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tyre pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (controlled via reverse gear) Godpfxexf Skpo Af Ujbu ----General Attachments: * Mechanical BPW landing gear at front * 2 mechanical fold-down support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted at the front, right side of the chassis * Bolted underrun protection * Plastic quarter mudguards * Two-step access in front of the front wall on the left side ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Net hooks at the mounting points of the central locking system and 2 on the front wall * Steel pallet three-way tipper body with reinforced 600 mm "Strong" side walls * Continuous side panels at the top with inner tube reinforcement (without central stanchions), foldable with tailgate spring assist * Bolt-on rear corner posts * Combination steel double-leaf rear door, two-wing, asymmetrically divided, swivels and lockable to 270°, not foldable, with additional swinging frame for automatic rear door opening during tipping * Rear locking through galvanized rotary bar lock and central locking * Deactivation function for automatic rear door function when tipping backwards with open double-leaf door * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner: 1 x 5 t lashing ring, plus 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm sheet steel floor made of S 420 MC 4 fine-grained steel ----Ramps: * 1 pair of aluminium drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area, recessed in the chassis, accessible from the rear ----Paintwork: * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchions, rear support legs, and entry step hot-dip galvanized * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in a black tone ----Info: * Reinforced body with cargo securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Stanje: novo, Leto izdelave: 2026, Prikolica za transport bobnov s kabli. Dovoljena skupna masa 9.900 kg, uporabna nosilnost 7.380 kg. Hidravlično dvigovanje in spuščanje bobna s kabli iz vlečne enote ali s pomočjo 4-taktnega bencinskega motorja, zaščitni pokrov, hidravlični pogon bobna z gumijastimi pogonskimi valji, premer bobna 800–3.000 mm, širina bobna do 1.650 mm, centrirni stožci za bobne s kabli. Dvostopenjski podpiralni mehanizem spredaj, izvlečna zadnja opora. Os BPW, sistem EBS, parabolična vzmetenje, pnevmatike 315-80R22.5, nadzor tlaka v pnevmatikah. Vlečna kljuka, višina nastavljiva, 40 mm, zračna povezava z dvema vodiloma, razsvetljava 12+24 V LED. Orodjarna. Vozilo je v celoti pocinkano. Novo vozilo, vključno s tovarniško garancijo. = Dodatne informacije = Lastna masa: 2.520 kg Gbsdpfxezp Dnbs Af Uju Nosilnost: 7.380 kg Dovoljena skupna masa: 9.900 kg Stanje pnevmatik zadaj: 100 Pnevmatike spredaj: 315-80R22.5 Pnevmatike zadaj: 315-80R22.5 Država proizvodnje: DE Za več informacij se obrnite na Jana-Marca Schwickerta.

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: Gsdjrwc R Ropfx Af Uobu * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, ETÜ-TA-ER 19.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm by offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 Volt ----General Attachments: * Jost landing gear, front * External folding supports, rear * Plastic toolbox approx. 750 x 350 x 300 mm, right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drilling rig transport on chassis * 50 mm softwood flooring, clamped * Preparation in front of front wall for subsequent installation of container locks * Bolted front wall, smooth sheet * Split side walls, steel sheet, trapezoidal profile—foldable with central folding stakes * Steel rear wall, sliding between ramps—holder inside front wall when not in use * Bolt-on rear stakes ----Load Securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t fall-arrest lashing rings every 600 mm * Load securing package: Each front and rear corner 1 x 10 t UVV lashing ring, each side 2 x 8 t UVV retractable lashing rings in outer frame; in front and end crossmember various bores for 1.2 t lashing options ----Ramps: * One-piece sliding ramps 12 t / pair, approx. 2,750 x 620 mm Gedpfx Aemi Tcqef Usbu * Rear approach slope approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75 R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * ---Axles, air reservoirs, flange eye, and landing gear painted black--- * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak,  ,  Vozilo stranke, , --  Napake v tisku, napake in spremembe so pridržane, vzorčne fotografije --, Več podatkov na: !, Več podrobnosti: ! Gbsdpfxjz Ilmtj Af Usu

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - Rezervno kolo - Centralno podmazovanje - Dvojni pnevmatiki = Opombe = Müller Mitteltal, dvovosni priklopnik T5 2AL s platformo in rampo Zračna vzmetitev Gsdpsxw T Uasfx Af Uobu BPW osi ABS ZSA Pnevmatike: 60 % GR 235R17,5 IDNR 665 Z veseljem vas pričakujemo za posvet, podpis pogodbe ali prevzem vozila v našem avtosalonu. Prosimo, dogovorite se za termin. Če se ne morete osebno obiskati našega avtosalona, vam ponujamo celoten postopek prek telefona/e-pošte/WhatsApp/faksa. Po želji vam dostavimo novo vozilo neposredno do vaših vrat. To pomeni najboljšo ceno, maksimalno varnost in udobje pri nakupu avtomobila. Prevzem starega vozila Zelo radi sprejmemo vaše rabljeno vozilo v račun. Ponujamo možnost digitalne ocene vozila na podlagi fotografij vašega vozila, tudi brez obiska avtosalona. Naša specializirana ekipa za odkup vam ponuja zagotovljeno najvišjo ceno. Po želji vam dostavimo vaše novo rabljeno vozilo po vsej Nemčiji neposredno do vaših vrat in prevzamemo vaše rabljeno vozilo. Financiranje – lizing Takojšnja potrditev in prevzem obstoječega kredita. Vaš specializirani partner za osebna vozila, kombije, gospodarska vozila in gradbene stroje. ITC Gmbh & Co KG Siemensstaße: 7 32312 Lübbecke (industrijsko območje) Obiščite nas na naši spletni strani: Vedno več kot 400 vozil na zalogi. Podatki v oglasih, na internetu, cenovnih tablicah in fotografijah so nezavezujoči opisi in ne predstavljajo zagotovljenih lastnosti. Prodajalec ne prevzema odgovornosti/garancije za tipkarske in prenosne napake. Izpostavljena oprema mora kupec po potrebi dodatno preveriti. Naša ponudba običajno ne vključuje novega tehničnega pregleda, vendar vam z veseljem pripravimo ponudbo naše partnerske delavnice. Pridržana napaka in možnost predčasne prodaje. = Dodatne informacije = Lastna teža: 8.900 kg Nosilnost: 26.100 kg Največja dovoljena masa: 35.000 kg Prodajna cena: 16.999 €, 19.740 US$

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ----Braking system: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar / Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ----Electrics / Lighting: * TPMS (tyre pressure monitoring system) * 15-pin power connector * LED tail lights ----General Attachments: * Jost landing gear at the front * Outward folding rear supports * Tool box made of galvanized steel sheet, approx. 650 x 350 x 320 mm, mounted on the right side (powder-coated black) * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Reinforcement package for drill rig transport on the chassis – loading height +20 mm * 50 mm softwood floor, clamped design * Preparation in front of the front wall for subsequent installation of container locks * Bolted smooth steel front wall * Fold-down trapezoidal-profile steel side walls with board-lift assist * Steel rear wall, slidable between ramps – storage bracket for unused position inside, in front of the headboard * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * Front and rear corners each fitted with 1 x 10 t lashing ring; multiple holes for 1.2 t lashing options in front and rear crossmembers ----Ramps: * One-piece, mechanical grate ramps with spring system for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm gap) * Rear access angle approx. 860 mm Gbsdspk D D Hopfx Af Uou ----Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ----Paintwork: * Chassis, drawbar, front wall, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in a shade of black * Sideboard painting in RAL 9010 pure white * Painting of side walls in an individual RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 31.630 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.250 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2026, * T 4: * EBS (Elektronisches Bremssystem) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Warning sign packages, front and rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at the rear * 24 V 15-pin as well as additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated sheet steel and spare wheel holder in basket design on right side * Enclosed single plastic mudguards at the front * Straight steel mud flaps at the rear each with splash protection (spray suppression) * Side underrun protection * Extended offset cranking by 500 mm forward * Kingpin platform extension by 520 mm with 45° angled corners and 3 recessed lockable storage compartments with lid * Chassis made from high-strength fine-grained steel Gjdpfx Afel Th Evj Uobu * Flooring over turntable platform made of 50 mm and in low-bed platform made of 60 mm softwood * Outer boards of the drive-on ramps made of 50 mm bamboo wood * Four stake pockets per side (stakes not included) with integrated 2 t lashing point * Load securing package (Lasi package) including: 2 lashing eyes (6.4 t) front left/right on the main frame of the turntable platform; on both sides, front and rear, 1 pair of 13.4 t lashing rings on the outer frame, 4 pairs per side of 10 t swivel and drop lashing rings, loadable in all directions and integrated into the outer frame; 2 pairs of 6.4 t lashing rings per side in the excavator stick tray; 8 pairs of galvanized folding extensions for total width of 3 m (not at the rear angled section) * Side extension planks stored on the left in a compartment * Excavator stick rest above rear axle up to the end of approach slope, approx. 2,300 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic, hot-dip galvanized drive-on ramps approx. 3,000 x 720 mm * Hydraulic side ramp shifting on sliding tube from ramp axle * Loading area above kingpin: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, kingpin platform, drive-on ramps, mechanical folding supports at rear hot-dip galvanized * Axles, springs, air tanks, and kingpin painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, lastna masa: 907 kg, največja dovoljena obremenitev: 2.130 kg, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: drugo, gradbena višina: 1.260 mm, delovna širina: 1.930 mm, Manufacturer: Humbaur Model: 3-way Tipper HTK Alu 3000.31 Permissible Total Weight: 3,000 kg Payload: 2,130 kg Unladen Weight: 870 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13-inch Loading Height: 750 mm Load area hydraulically tiltable with hand pump and electric pump Tipping angle rear: 42°, side: 50° With sheet metal extension, 600 mm high, 4-way hinged Including flat tarpaulin - V-drawbar, hot-dip galvanized by immersion - Chassis and tipping bridge hot-dip galvanized by immersion - Tipping bridge made of one-piece steel - 4-stage, hard-chromed tipping cylinder - Hand pump, from 3,000 kg permissible total weight with electric pump and hand pump - 13-pin connector and reversing lights - Side panels made of aluminum, 350 mm high, completely removable - Rear flap pendulum mounted - 6 lashing rings mounted on the platform floor, lashing force 800 kg each, Dekra certified - Support wheel - Railing trough pre-equipped for quick retrofitting of aluminium ramps Price includes vehicle registration document (Part II registration certificate and COC papers). We have a large selection of trailers in stock from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Technical specifications, prices, and information subject to change and errors excepted. No liability for errors or misprints. Features: Automatic reversing, rubber torsion axle, independent suspension, tiltable bed, support wheel, marker lights, chassis and tipping body hot-dip galvanized by immersion, braked, includes warranty, V-drawbar hot-dip galvanized by immersion, one-piece steel tipping bridge, 4-stage hard-chromed tipping cylinder, hand pump, from 3,000 kg permissible total weight with electric pump and hand pump, 13-pin plug and reversing lights, 350 mm high aluminum side panels, completely removable, pendulum-mounted rear hatch, 6 lashing rings with 800 kg tensile force each, Dekra certified, ramp channel pre-equipped for easy retrofitting of aluminum ramps. Gbsdpfoyw Ez Usx Af Usu

Stanje: novo, lastna masa: 972 kg, največja dovoljena obremenitev: 2.315 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 4.100 mm, širina tovornega prostora: 2.100 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 3,4 m³, barva: drugo, gradbena višina: 1.460 mm, delovna širina: 2.280 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.41 Permissible Total Weight: 3500 kg Payload: 2315 kg Unladen Weight: 1185 kg Body Dimensions: 4100 x 2100 x 350 mm Tyres: 13 inch Loading Height: 760 mm Load Platform hydraulically tiltable with hand pump and electric pump Tipping Angle rear 45°, lateral 45° with 350 mm aluminium drop-side extension - V-drawbar, hot-dip galvanized - Chassis and tipper platform, hot-dip galvanized - Tipping platform made of steel, pressed from a single piece - 4-stage hard-chromed tipping cylinder - Hand pump, from 3000 kg total weight electric pump with hand pump - 13-pin plug and reversing lights - Aluminium drop sides, 350 mm high, fully removable - Rear tailgate, swinging Gedpsflw Sbsfx Af Uebu - 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified - Jockey wheel - Plank box prepared for easy retrofit of aluminium planks Price incl. vehicle registration document (Part II and COC papers) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn, and Neptun. On request, we provide a free temporary registration plate. We repair trailers from all manufacturers. Additional accessories available upon request. Technical alterations, price changes, and errors excepted. No liability for errors or misprints. Automatic reversing system, rubber suspension axle, independent suspension, tiltable load platform, jockey wheel, marker lights, chassis and tipper platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of single-piece steel, 4-stage hard-chromed tipping cylinder, hand pump, from 3000 kg total weight electric pump with hand pump, 13-pin plug and reversing lights, aluminium drop sides 350 mm high, fully removable, swinging rear tailgate, 8 tie-down rings mounted in the platform floor, 800 kg tensile strength per ring, Dekra certified, plank box prepared for easy retrofit of aluminium planks.

Stanje: novo, lastna masa: 1.040 kg, največja dovoljena obremenitev: 2.460 kg, skupna masa: 3.500 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 3.140 mm, širina tovornega prostora: 1.750 mm, višina nakladalnega prostora: 350 mm, prostornina tovornega prostora: 2,2 m³, barva: srebrn, gradbena višina: 1.260 mm, delovna širina: 1.903 mm, Manufacturer: Humbaur Model: 3-Way Tipper HTK Alu 3500.31 Gross Vehicle Weight: 3,500 kg Payload: 2,460 kg Unladen Weight: 1,040 kg Bed Dimensions: 3,140 x 1,750 x 350 mm Tyres: 13 inch Loading Height: 740 mm Loading Platform Hydraulically Tippable with Hand Pump and Electric Pump Gbodjwlabxepfx Af Ueu Tip Angle: Rear 42°, Side 50° - V-drawbar hot-dip galvanized - Chassis and tipping bridge hot-dip galvanized - Tipping bridge made from a single piece of steel - 4-stage hard-chromed tipping cylinder - Electric pump with hand pump - 13-pin plug and reversing lights - 350 mm high side walls made of aluminium, completely removable - Rear flap can be used as a swing tailgate - 6 lashing rings mounted on the bridge floor, each with an 800 kg tie-down capacity, DEKRA-certified - Jockey wheel - Plank compartment prepared for easy retrofit of aluminium ramps - Silver side panels - Parabolic suspension Price includes vehicle registration certificate (Part II and COC documents) We have a large stock of trailers from the following manufacturers: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun. Upon request, we can provide a free temporary license plate for transfer. We repair trailers of all makes. Additional accessories available upon request. Subject to technical changes, price adjustments, and errors. No liability for mistakes or printing errors. Features: Automatic reversing system, rubber suspension axle, independent wheel suspension, tilting loading area, jockey wheel, marker lights, hot-dip galvanized chassis and tipping bridge, braked, including warranty, V-drawbar hot-dip galvanized, tipping bridge made from a single piece of steel, 4-stage hard-chromed tipping cylinder, electric pump with hand pump, 13-pin plug and reversing lights, 350 mm high aluminium side walls, completely removable, rear flap can be used as a swing tailgate, 6 lashing rings on the bridge floor (800 kg capacity per ring, DEKRA-certified), plank compartment prepared for easy retrofit of aluminium ramps, silver side panels, parabolic suspension.

Stanje: rabljeno, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2006, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2006, Oprema: ABS, Vse XXL deluje Gjdpfsy Ag Nwex Af Ujbu

Stanje: novo, največja dovoljena obremenitev: 14.550 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Towing Eye: * Drawbar with 50 mm flange towing eye and height-adjustable drawbar ---- Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing leg at the front * External folding support legs at the rear * Toolbox made of galvanized sheet steel approx. 650 x 350 x 320 mm, fitted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards Gbsdpfspk D Ncjx Af Uou ---- Low Loader Platform: * Reinforcement package for drilling rig transport on the chassis – loading height +20 mm * 50 mm softwood floor in clamped design * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Side walls made of trapezoidal-profiled steel sheet, foldable with board wall spring-assisted lifter * Steel rear wall, can be inserted between the ramps – storage bracket in front of the bulkhead when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * Each front and rear corner with 1 x 10 t lashing ring; various holes in the headboard and end cross member for 1.2 t lashing options ---- Ramps: * One-piece mechanical steel grating ramps with spring assistance for one-man operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear access slope approx. 860 mm ---- Tyres: * Wheelbase: 1,310 mm * Tyres: 235/75R17.5 ---- Painting: * Chassis, drawbar, headboard, tailgate, rear folding supports, and ramps hot-dip galvanized * Axles, springs, air reservoirs, and landing leg painted in black * Side boards painted in RAL 9010 pure white * Side walls can be painted in any RAL color for a surcharge ---- Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Immediately available from Egestorf