Faymonville Max Trailer Max110 Semi-Tieflader nakup rabljenega (33.030)

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni jaški * Hidravlične nakladalne rampe nastavljive po širini Bwedpewta Alofx Al Hsl * Zračno vzmetenje * Razširljiv * Lastna teža: 11.020 kg -----Interna številka vozila: 11010----Pridržujemo si pravico do napak in vmesne prodaje. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemščina, angleščina -- WhatsApp nemščina, angleščina, arabščina

Stanje: novo, največja dovoljena obremenitev: 51.780 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our entire range of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the specification. Full specification available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, rear with bevel approx. 1,000 mm x 10° * Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front control panel with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * One mounting hole in the rear upper section of the gooseneck outer beams for a bolt-on lashing ring * 1 pair of screw-in lashing rings included (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck: plug-in aluminium tailboard, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on the gooseneck * 2-inch king pin * One crosswise stake pocket rail fitted in the deck of the gooseneck before the bevel, for plug-in stakes, approx. 100 x 50 mm LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in loading platform and bevel to accommodate excavator stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd and 4th axle steering * 3rd and 4th axles with electro-magnetic reversing lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Mechanical landing gear with 2-speed gearbox and crank * Continuous hardwood floor covering on loading platform and between axles (approx. 50 mm thick), increases friction coefficient * 1 intermediate table with a recessed loading area, approx. 300 mm wide, for the large cross-section sliding tube with sheet metal covering * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 6 pairs of recessed, fold-out lashing rings in the loading platform's outer frame (LC 10,000 daN) * Additionally, 1 pair of lashing rings on the outside of the front cross member, turned approx. 90° inward towards the loading area (LC 10,000 daN) * Extendable galvanized widenings, approx. 230 mm per side (without wooden planks) * 1 pair of fixed wheel recesses open to the extension, approx. 700 x 410 mm (W x D) in the loading platform in front of the 1st axle * Between 2nd and 3rd axle: 1 pair fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D) * 1 pair mechanical rear supports * 245/70 R 17.5 3PMSF twin tires – brand of our choice HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-HB-HV-M * One pair of two-part steel ramps, approx. 4,350 mm long and 900 mm wide * Hardwood flooring, hydraulically foldable ramp tips * Ramps hydraulically movable by approx. 235 mm outwards and approx. 215 mm inwards, individually * Hardwood flooring on the loading platform’s bevel * Ramp with hardwood flooring BRAKING SYSTEM: * WABCO EBS-E braking system compliant with EU regulations SURFACE TREATMENT: Bwjdpfx Aeyhkrlsl Hjl * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% a

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 11/2016, skupna dolžina: 12.750 mm, skupna širina: 2.540 mm, skupna višina: 3.650 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, medosna razdalja: 6.460 mm, barva: rdeča, Leto izdelave: 2016, Oprema: ABS, 1 x self-tracking axle / trailing steering axle. Hydraulic ramps. Loading bed: 860 cm Loading height: 90 cm Coupling height: 130 cm = Further Information = Bodoy Igkropfx Al Hjwl Axle configuration Tyre size: 235/75R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tread depth left inside: 40%; Tread depth left outside: 40%; Tread depth right inside: 40%; Tread depth right outside: 40% Rear axle 2: Twin tyres; Tread depth left inside: 35%; Tread depth left outside: 35%; Tread depth right inside: 35%; Tread depth right outside: 35% Rear axle 3: Twin tyres; Tread depth left inside: 50%; Tread depth left outside: 50%; Tread depth right inside: 50%; Tread depth right outside: 50% Weights Unladen weight: 9,190 kg Payload: 38,810 kg Gross vehicle weight: 48,000 kg Identification Type number: F-S43-1A1Y / HYDRAULIC RAMP = Company Information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) We speak Russian. We strive to provide correct information, but no rights can be derived from the texts provided.

Stanje: dober (rabljeno), številka stroja/vozila: YAMT23XX6H0102153, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.250 mm, Leto izdelave: 2018, = Dodatne možnosti in oprema = - Zadnje zračno vzmetenje - Sprednje zračno vzmetenje - Bobnasti zavorni sistem = Dodatne informacije = Teže Lastna teža: 11.400 kg Nosilnost: 36.600 kg Skupna dovoljena masa: 48.000 kg Stanje Tehnično stanje: dobro Vizualno stanje: dobro Dodatne informacije Stanje prednjih pnevmatik: 50 Prednje pnevmatike: 385/65 R 22.5 Zadnje pnevmatike: 385/65 R 22.5 Zadnji pregled: 2025-12-22 Bwjdpfxsx Rfu Ie Al Hel Dodatne informacije Za več informacij kontaktirajte Lastas Sales.

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually Bwodpfx Aoy Auh Iol Hel * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment: Complete equipment details available upon request. GOOSENECK: * Gooseneck in SNT design to optimize the loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 6° * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK UNIBOX * Grating surface with 5 mm steel plate reinforcement on the gooseneck and rear chamfer * 2-inch kingpin * Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized * 1 LED work light mounted top left and right on the front wall, wired to the connection strip for the tractor LOADING AREA: Bsdpsy Auhhefx Al Hewl * Loading area approx. 9,600 mm long, rear chamfer approx. 900 mm x 6° * Loading area behind gooseneck hydraulically liftable and lowerable, approx. 3,000 mm, loadable up to approx. 9,000 kg * Continuous grating surface with 5 mm steel plate reinforcement on lifting bed and loading area, rated for point loads TYRES: 235/75 R 17.5 3PMSF twin tyres. Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered * 3rd axle with electromagnetic reverse lock, can be activated by reverse gear or manually * 1st axle with start-up aid * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve HYDRAULIC LOADING RAMPS: * 1 pair of two-part AXS steel ramps with grating surface, approx. 4,920 mm long, approx. 900 mm wide * Hydraulically folding ramp tips * Ramps can be hydraulically shifted individually approx. 235 mm outward and approx. 365 mm inward * Flashing beacons on the outer edge of the ramp tips, switch located next to ramp control * Ramp locking in driving position via quick-release * Sand coating painted on external frame of the ramp and on the ramp tip * Mechanical lateral drop leg supports in the ramps for docking to unloading ramps * Hydraulic ramp control valves on the right side of the vehicle BRAKE SYSTEM: WABCO EBS-E brake system according to EU regulations SURFACE TREATMENT: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection PAINTWORK: * Trailer carmine red (RAL 3002) * Wheels silver grey * Sideboards natural aluminium * Wheel hubs according to axle manufacturer * Light panel pure white (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. connection strip for supply lines to the tractor, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain attachment points on inner left/right of the front wall, incl. Alu tray underneath left/right for storing chains or straps * Behind the front wall screwed-on DELIGNIT panel (approx. 12 mm thick) * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling force, with radio remote control. Steel rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope presser roller * Deflection pulley for winch with shackle and bolted lashing point

Stanje: novo, največja dovoljena obremenitev: 38.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including immediately and short-term available vehicles, can be found on our website. Excerpt from the equipment list. Full specification available upon request. EQUIPMENT: * Gooseneck, approx. 4,100 mm long, with central beam * Extendable loading platform, approx. 9,400 mm long, with rear bevel approx. 350 mm x 10° and integrated hook-in strip for attaching loose aluminium access ramps * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are routed protected inside the extendable beams and automatically adjust to the current platform length * Technical fifth-wheel load: 18,000 kg * Suitable for 4x2 and 6x2 tractor units * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tires. Brand subject to availability * ASPÖCK-UNIBOX * 3 kW electro-hydraulic pump unit for controlling hydraulic functions. Without installation of supply ports on the tractor unit * 4 pairs of recessed lashing rings in the outer frame of the gooseneck: - the first three pairs lying flat (LC 10,000 daN) - the rear pair foldable outward (LC 10,000 daN) * 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 inch kingpin * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load approx. 50,000 kg * Approx. 32 mm timber floor on gooseneck and platform, encased in aluminium omega profiles * 10 pairs of recessed lashing rings, foldable outward, in the outer frame of the platform * In front of the last axle and on the rear cross member of the semi-trailer, 1 pair of lashing rings each (LC 10,000 daN) * All other lashing rings (LC 5,000 daN) * 6 pairs of stake pockets recessed in the outer frame of the platform, for plug-in stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading platform, on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform, left side in direction of travel * Bevel at the rear cross member of the vehicle, approx. 350 mm x 10° * Integrated hook-in strip for loose aluminium access ramps at the rear cross member of the vehicle * 1 pair of drop-in supports at the rear cross member * Remote steered axles from the front and rear using cable remote control, with single-track axle alignment, no installation required in the tractor unit * Round NATO socket at the front connector socket panel (Maeler & Kaege VG 96 917) * 1 LED work light on each side, left and right, mounted on the front wall with wiring to the connector socket for the tractor unit * On the extension an additional locking point every 500 mm * Holder for plug-in stakes, for storage when not in use, inside the front wall of the gooseneck Bwedpfsy Augdox Al Hel * 4 wheel chocks with holder under the loading platform * Galvanized, sliding width extensions, extendable by approx. 230 mm per side (without timber planks) * 1 LED work light each side, left and right, in front of the axles with wiring to the connector socket for the tractor unit * 2 axle load gauges mounted on the left-hand side including axle load diagram * 1st axle with traction aid * Mounts for warning signs under the gooseneck and at left and right on the rear cross member * A

Stanje: rabljeno, barva: modra, Leto izdelave: 2022, Faymonville Maxtrailer F-S42-2GXX. Baujahr: 2022. 12 t Pendel-X Achsen. Eigengewicht: 12.917 kg. Nutzlast: 34.083 kg. Zulässiges Gesamtgewicht: 47.000 kg. Sattellast: 23.000 kg. Hydraulisch abfahrbares Schwanenhals. Aluminium Bordwände + Werkzeugkasten am Schwanenhals. Reserverad. Hydraulikanschluss am Lkw (NATO). 5,5 m ausziehbar. 2 x 25 cm verbreiterbar. Funkfernbedienung. Hydropneumatische Federung. Baggerbrücke 2600x700 mm. Verzinkt. Abmessungen: Schwanenhals: L: 3700 mm B: 2450 mm H: 1450 mm Sattelhöhe: 1150 mm Ladefläche: L: 6850 mm B: 2550 mm H: 350 mm Bodenstärke: 200 mm Heck Trailer: L: 2600 mm B: 2550 mm H: 1000 mm Bereifung: 245/70R17,5, Profil 90% Zustand: Wie neu! ID-Nr.: 509 Die Allgemeinen Geschäftsbedingungen der Firma Heinhuis finden auf alle Anzeigen, Angebote und Offerten von Heinhuis, auf sämtliche von Heinhuis geschlossenen Verträge sowie auf den ihnen vorausgehenden Verhandlungen Anwendung. Durch jegliche Form der Reaktion erkennen Sie die Gültigkeit der Allgemeinen Geschäftsbedingungen von Heinhuis an und bestätigen, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Nettoexportpreise. = Weitere Informationen = Baujahr: 2022 Leergewicht: 12.917 kg Zuladung: 34.083 kg Zulässiges Gesamtgewicht: 47.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Für weitere Informationen: WhatsApp: Bedpey A Edajfx Al Hjwl

Stanje: rabljeno, Leto izdelave: 2018, Faymonville Maxtrailer F-S43-1AAF. Bwodpjy Ay R Iofx Al Hsl Baujahr: 2018. 9-Tonnen SAF-Achsen. Leergewicht: 9.961 kg. Maximales Gewicht: 45.000 kg. Sattellast: 18.000 kg. Lenkachse mit 3 gelenkten Achsen. 7,5 Meter ausziehbar. Luftfederung. Edelstahl-Werkzeugkästen. Funkfernbedienung. 1. Achse Liftachse. EBA ABS ALB. Abmessungen Ladefläche: L: 13.550 mm. B: 2.480 mm. H: 1.400 mm. H öberkante Bordwände: 600 mm. Bereifung: 385/65R22,5 70% Profil. ID NR: 513. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis auf alle Anzeigen, Angebote und Offerten von Heinhuis, auf alle mit Heinhuis abgeschlossenen Verträge sowie auf eventuelle diesen vorangegangene Verhandlungen. Mit jeglicher Rückmeldung akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und bestätigen, diese zur Kenntnis genommen zu haben. Unsere Preise sind Export-Netto-Preise. = Weitere Informationen = Baujahr: 2018 Leergewicht: 9.961 kg Zuladung: 35.039 kg zGG: 45.000 kg Ausziehbarer Aufbau: Ja = Firmeninformationen = Weitere Informationen erhalten Sie über: WhatsApp:

Stanje: rabljeno, barva: rdeča, Leto izdelave: 2021, Faymonville Maxtrailer F-S43-1AAF. Baujahr: 2021. Bedpey Ayy Njfx Al Hewl 10,5 t BPW-Achsen. Eigengewicht: 9.446 kg. Max. Gesamtgewicht: 49.500 kg. Sattellast: 18.000 kg. Luftfederung. Werkzeugkasten am Schwanenhals. 3. Achse ist Nachlauflenkachse. Baggerbrücke. Radmulden (50 cm tief). Mechanische Rampen (Länge: 2.450 mm). Abmessungen: Schwanenhals: Länge: 3.450 mm. Breite: 2.550 mm. Höhe: 1.400 mm. Sattelhöhe: 1.200 mm. Ladefläche: Länge: 9.300 mm. Breite: 2.550 mm. Höhe: 900 mm. Bereifung: 235/75R17,5 50 % Profil. Deutscher Auflieger! ID-Nr: 678. Es gelten die Allgemeinen Geschäftsbedingungen der Heinhuis für alle Inserate, Angebote und Kostenvoranschläge von Heinhuis sowie alle von Heinhuis abgeschlossenen Verträge und die ihnen vorausgehenden Verhandlungen. Mit jeder Art der Reaktion akzeptieren Sie die Anwendbarkeit der Allgemeinen Geschäftsbedingungen von Heinhuis und erklären, dass Sie diese zur Kenntnis genommen haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2021 Leergewicht: 9.446 kg Nutzlast: 40.054 kg zul. Gesamtgewicht: 49.500 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.500 kg, dovoljena osna obremenitev (os 2): 10.500 kg, dovoljena osna obremenitev (os 3): 10.500 kg, prva registracija: 12/2017, skupna dolžina: 13.500 mm, skupna širina: 2.530 mm, skupna višina: 3.400 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17.5, Leto izdelave: 2017, Oprema: dvižna zadnja plošča, Achskonfiguration Reifenmaß: 235/75R17.5 Marke Achsen: SAF Federung: Luftfederung Hinterachse 1: Doppelbereift; Liftachse; Max. Achslast: 10.500 kg; Reifenprofil links innen: 70%; Reifenprofil links außen: 70%; Reifenprofil rechts innen: 70%; Reifenprofil rechts außen: 70% Hinterachse 2: Doppelbereift; Max. Achslast: 10.500 kg; Reifenprofil links innen: 40%; Reifenprofil links außen: 40%; Reifenprofil rechts innen: 40%; Reifenprofil rechts außen: 40% Hinterachse 3: Doppelbereift; Max. Achslast: 10.500 kg; gelenkt; Reifenprofil links innen: 40%; Reifenprofil links außen: 40%; Reifenprofil rechts innen: 40%; Reifenprofil rechts außen: 40% Gewichte Bodpfx Aleyzx Dko Howl Leergewicht: 10.990 kg Zuladung: 38.510 kg zul. Gesamtgewicht: 49.500 kg Zustand Technischer Zustand: gut Optischer Zustand: gut

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Bjdpfog Sk Trox Al Howl Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° Bedexarmaspfx Al Hjwl * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin Bodpfxoyhkque Al Hswl - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, največja dovoljena obremenitev: 36.650 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, naslednji pregled (TÜV): 11/2025, Oprema: ABS, Equipment extract Load area: - Load platform with extendable design featuring pneumatically operated locking system. - 2 pairs of flat lashing rings (LC 5,000 daN). - 1 pair of lashing rings in the gooseneck (LC 10,000 daN). - 6 pairs of outward-folding lashing rings (LC 5,000 daN). - 3 pairs of outward-folding lashing rings (LC 10,000 daN). - Cut-outs in the outer frame of the load platform for attaching tensioning straps (LC 2,000 daN). Landing legs: - JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load). Tyres: - Tyres 245/70 R 17.5 – brand at our discretion. Load index (146/146F). Axles: - BPW axles, hydro-mechanically forced steering. - Air suspension with raising and lowering valve. - Axle tools. Brake system: - Brake system compliant with EU regulations with EBS-E (2S2M), without connection lines to the tractor unit. Steel construction: - Steel structure made of high-strength fine-grain steel grades: S355J2+N/S355MC (yield strength 355 MPa) and S690QL/S700MC (yield strength 690 MPa). Painting: - Premium, durable corrosion protection through 2-component (2K) zinc dust primer applied to the standard shot-blasted welded frame. - High-quality 2-component (2K) topcoat, single-color in RAL 3002 Carmine Red. - Rear section metallized and painted in RAL 9010 Pure White. - Rims silver (no metallic paint available). Electrical system: - Electrical installation as per EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098). Warning signs: - One holder each on the gooseneck and rear panel, left and right, for warning signs including socket. Including the following additional features: - Remote steering from front and rear via cable remote with push buttons, includes single-track control of the axles (no installation in the tractor unit required). - Electro-hydraulic unit (± 45 kg). - 4 wheel chocks with holders on the front wall (± 5 kg). - 2-inch kingpin. - One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high (± 35 kg). - Yellow-red air couplings on the galvanized front connection rail. - Yellow reflector tape in accordance with EU regulations on the sides, extension, and rear of the trailer. - European reflector signs (red-yellow) on the rear of the trailer. - One mud flap on the rear of the trailer. - Manual and description on USB stick. - Holder for a beacon on the rear of the trailer. - Load platform with heavy-duty hardwood floor. - 9 pairs of stake pockets, approx. 100 x 50 mm, in the outer frame of the load area (± 27 kg). - Extensions, galvanized, extendable up to approx. 230 mm each side (± 230 kg). - Spiral cable for supplying the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with NATO-NATO connections. Bwsdsx Epznepfx Al Hel - Galvanized supports under the sloped section of the load area. - Anti-slip sand coating applied to the central beam. - 6 pairs of WADER container locks in the load area for 1x20' container, 2x20' containers or 1x40' container; an additional locking position is provided in the extension for a 45' container (± 90 kg). - 4 pairs of transverse stake pocket strips, mounted across the load area for loose stakes approx. 100 x 50 mm (± 145 kg). - Storage for max. 9 pairs of loose stakes, approx. 100 x 50 mm, on the inside of front wall.

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish Bjdpfsrgzv Nsx Al Hjwl * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section Bwjdpfx Alstx Nwno Hsl * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, največja dovoljena obremenitev: 51.870 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately and at short notice, can be found on our website. Extract from the equipment. Full equipment details available upon request. GOOSENECK - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with 1,000 mm x 10° bevel - Suitable for tractor units: 4x2, 6x2, and 6x4 - Removable steel front wall, approx. 400 mm high - Yellow-red air couplings on the front connector strip - ASPÖCK UNIBOX on the front connector strip with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic unit for hydraulic control - Outer beams of the gooseneck with mounting holes for bolt-on lashing rings - One mounting hole at the upper rear of the gooseneck outer beams for a bolt-on lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - On the gooseneck, 1 pair of plug-in aluminum sideboards, approx. 400 mm high, anodized finish - On the gooseneck, one plug-in aluminum rear board, approx. 400 mm high, anodized finish - Approx. 40 mm thick hardwood flooring above the gooseneck - 2-inch kingpin - Gooseneck guide plate for fifth wheel, approx. 500 mm wide - Rear mount on gooseneck for aluminum drive-on ramps - Round NATO socket at the front connector strip (Maeler & Kaege VG 96 917) LOADING PLATFORM - Extendable loading platform, approx. 8,800 mm long, rear with 500 mm x 10° bevel - Recess in the loading platform and the bevel to accommodate excavator dipper arm, approx. 2,490 x 750 x 210/290 mm (L x W x H) - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension - 1st and 2nd axles fixed, 3rd and 4th axles steering trailing axles - 3rd and 4th axles with electro-magnetic reverse lock, activating via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with raising/lowering valve Bedpfoxtc Uhjx Al Hjwl - 235/75 R 17.5 3PMSF twin tires - Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load: approx. 50,000 kg - Continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring on the loading platform (increased friction coefficient) - Loading platform locking using conically welded locking profiles every approx. 250 mm - Slotted holes for attachable and repositionable bridging elements at the front of the platform - Intermediate platform with offset surface, approx. 300 mm wide, for the large cross-section sliding tube with sheet covering – front and rear with slotted holes for attachable and repositionable bridging elements – removable panel flush with the loading platform - 1 pair of lashing rings on the front cross member (LC 10,000 daN) - 6 pairs of recessed lashing rings in the outer frame, foldable outwards (LC 10,000 daN) - Additionally, 1 pair of external lashing rings on the front cross member, rotated approx. 90° inwards to the platform (LC 10,000 daN) - Extendable (galvanized) extensions, approx. 230 mm per side - 1 pair of fixed wheel recesses open up to the extension, approx. 700 x 410 mm (W x D), in the platform before the 1st axle, wheel recesses with sheet covering and square climbing strips of approx. 15 x 15 mm, each approx. 200 mm - Between 2nd and 3rd axles in the platform, 1 pair of fixed wheel recesses, approx. 1,695 x 700 x 410 mm (L x W x D); covers for wheel recesses split lengthwise, with wood overlay, external plug-in mounting

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E Bjdpfx Alowvzg Rs Hswl * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: rabljeno, Leto izdelave: 2021, VAT/margin scheme: VAT deductible Bodpsu I I Ttsfx Al Hswl Front tyre condition: 90% Rear tyre condition: 90% Front tyres: 445/65 R 22.5 Rear tyres: 445/65 R 22.5 Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, lastna masa: 11.550 kg, največja dovoljena obremenitev: 30.450 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2019, naslednji pregled (TÜV): 01/2027, dolžina tovornega prostora: 13.450 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 700 mm, prostornina tovornega prostora: 23 m³, vzmetenje: zrak, barva: rdeča, Leto izdelave: 2018, vrsta prenosa: mehanski, Oprema: ABS, Lastna masa: 11.550 kg, dovoljena skupna masa: 42.000 kg, tovorni prostor (D Š V): 13.450 mm x 2.540 mm x 700 mm, volumen tovornega prostora: 23 m³, zračno vzmetenje, dvižna os: 1. os, elektronski zavorni sistem EBS, sledilno krmiljenje: 3. os, dvojna montaža pnevmatik, minimalna dolžina 13,45 m, maksimalna dolžina 18,20 m, lastna masa 11.550 kg, obremenitev sedla 18.000 kg, skupna masa 48.000 kg, izjemno dovoljenje DE, izvlečno, hidravlične nastavljive rampe, 3. os prisilno vodena, dvojne pnevmatike 235/75R17,5, vitel, tehnični pregled do 01-2027, YAMT13XXXJ0102830, Nezavezujoča ponudba, napake in vmesna prodaja pridržane. Slika ni nujno enaka ponudbi. Bwsdpsy Dng Tjfx Al Hjl

Stanje: dober (rabljeno), številka stroja/vozila: YAFTL4000J0022411, konfiguracija osi: 3 osi, medosna razdalja: 8.020 mm, barva: rdeča, Leto izdelave: 2019, = Dodatne možnosti in oprema = - Zadnje zračno vzmetenje - Sprednje zračno vzmetenje - Bobnasti zavorni sistem = Dodatne informacije = Teže Lastna teža: 15.200 kg Nosilnost: 32.800 kg Skupna dovoljena masa: 48.000 kg Stanje Tehnično stanje: dobro Optično stanje: dobro Dodatne informacije Stanje pnevmatik spredaj: 20 Stanje pnevmatik zadaj: 20 Bwedpfx Aewx Ea Hsl Hel Pnevmatike spredaj: 245-70 R 17.5 Pnevmatike zadaj: 245-70 R 17.5 Za več informacij kontaktirajte Lastas Sales.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 1.250 mm, Oprema: ABS, MAX Trailer Type 210 NEW | Hydraulic steering – extendable | 36t payload | 3 axles | from €76,900 New vehicle – can be individually configured for your application. High payload with robust construction and maximum cost-effectiveness. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for maximum load securing Bjdpsypaz Sefx Al Howl - Hydro-mechanically forced-steered BPW axles with disc brakes - Air suspension with lift and lower function - WABCO EBS brake system in compliance with EU regulations - Mechanical JOST landing legs with 2-speed gearbox - LED lighting system - Tyre pressure monitoring system (TPMS) Construction & Durability: - High-strength fine-grain steel construction - Metallised chassis with premium corrosion protection - Multilayer paintwork with additional cavity sealing - Heavy-duty wooden floor in robust Omega profiles Included Options: - Convenient rear steering via cable remote control - Electro-hydraulic power pack - Galvanised front wall (approx. 1,200 mm) - EN 12642-XL body - 10 pairs of stake pockets for flexible load securing - Spare wheel holder under the loading area - Beacon holder - Reflective tape & European reflector plates - Air couplings at front Additional equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Stanje: novo, največja dovoljena obremenitev: 34.500 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.540 mm, skupna višina: 350 mm, Oprema: ABS, MAX Trailer Type 510 NEW | Hydraulic Pendle Axle – extendable | 34t payload | 2 axles | from €136,900 New vehicle – can be customized to your specific field of application. High payload with robust construction for maximum cost-efficiency. ----Technical Highlights • Hydraulically liftable and lowerable gooseneck with approx. 23,000 kg fifth wheel load • SUPER LOW low bed trailer, extendable, with approx. 40 mm hardwood flooring • Hydraulically forced-steered pendle axles with axle equalization • Rear axle steering conveniently controlled via cable remote • Heavy-duty lashing points for professional cargo securing • Continuous excavator trough for versatile transport tasks ----Chassis & Safety • WABCO EBS brake system in accordance with EU regulations • Tire Pressure Monitoring System (TPMS) • 245/70 R17.5 tires • LED lighting system Short. Strong. Ready. Bwjdpjypa Ifefx Al Hel ----Construction & Durability • High-strength fine-grain steel construction • Metallized vehicle chassis with premium corrosion protection • Multi-layer paint system for extended service life • Cavity sealing with special wax ----Included Options • Galvanized front wall + spare wheel • Electro-hydraulic unit • Preparation for 20'/40' container transport • Load gauge incl. load diagram • Central lubrication system BEKAMAX • Extendable warning panels with LED • Beacon holder ----Other equipment and individual adaptations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary according to configuration.

Stanje: novo, največja dovoljena obremenitev: 39.600 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, skupna višina: 860 mm, MAX Trailer Type 100 NEW | Extendable | 39t Payload | 3 Axles | from €66,900 New vehicle – individually configurable to suit your application. High payload capacity with rugged construction and maximum cost-efficiency. Bwodpfxjypa Nps Al Hjl --- Highlights: • Approx. 39,600 kg payload • Loading platform 8,600 mm + 5,400 mm extendable • Ramp load capacity up to 40,000 kg • BPW axles with air suspension • WABCO EBS braking system --- Technical Data: • Gross vehicle weight: 49,500 kg • Unladen weight approx.: 9,866 kg • Loading height at max. load: approx. 860 mm • Overall width: 2,540 mm • Speed: 80 km/h --- Standard Equipment: • Extendable loading platform with durable hardwood floor • Galvanised steel ramps with hydraulic lifting mechanism • High-strength steel construction with long-lasting corrosion protection • LED lighting system • JOST landing legs with 2-speed gearbox • Tire Pressure Monitoring System (TPMS) --- Included Options: • Spare wheel with holder • Galvanised front wall (approx. 400 mm) • Electro-hydraulic power pack under loading platform • Extendable warning signs with LED • Reflective tape in accordance with EU regulations • Rotating beacon holder at rear • Ramp control valves on right side Additional equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.