Faymonville Max Trailer 4-Achs-Mega-Tele-Semi-Niedri nakup rabljenega (54.605)

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted. Fpsdpfx Afsxxkqzo Usn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802035492, lastna masa: 4.700 kg, največja dovoljena obremenitev: 33.300 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2024, naslednji pregled (TÜV): 04/2027, skupna dolžina: 9.600 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22,5", stanje pnevmatik: 80 odstotek, barva: srebrn, Pozor, slike so arhivske. Vozilo je morebiti v uporabi! Fpsdez Nglhopfx Af Usn #Podvozje, priklop za polprikolico, posoda Finozrnatostno jeklo, varjena konstrukcija, priklopna plošča z zamenljivim 2" kraljevskim čepom in 2 položajema kraljevskega čepa Prijemala za posode: Ko je zadnji podaljšek potegnjen: 1 x 20 čevljev ali 1 x 30 čevljev, zadnja stran poravnana Srednji teleskop, 1. stopnja, ko je zadnji podaljšek izpotegnjen, 1. stopnja: 2 x 20 čevljev ali 1 x 40 čevljev z Gooseneck tunelom Srednji teleskop kot med seboj drseč osrednji okvir cevi z zaskočnim mehanizmom Sprednja prečka z zložljivimi zapahi (ni na voljo za sprednji podaljšek) Brez nastavitev višine zadaj in brez zložljivih osrednjih opor, prevoz posode brez tunela ni možen. Zadnji podaljšek, nameščen na valjih, z ročnim mehanizmom 24 t, dvostopenjski podpiralni dvigalo, upravljanje z ene strani, z polkrožnim spodnjim delom in ravno priključno ploščo, z uravnavanjem podaljška 2 podstavka z držalom Bočni zaščitni element iz aluminija Zaščitni element pod vozilom, pocinkano jeklo Zaščitni element pod vozilom, izvlečen za 45-čevljske posode Polovični blatniki Z zaščitnimi elementi proti brizganju, v skladu z evropskimi standardi Zaščita zadaj #Osi in vzmetenje BPW osi z zavorami na disku s premerom diska 430 mm "Laserjsko izmerjene osi/podvozje" zmanjšanje obrabe pnevmatik in porabe goriva Medosna razdalja, zamaknjena 1410/1310 mm (kombiniran transport), do 44 t skupne dovoljene teže vlečne enote Zračno vzmetenje 1. os, avtomatska dvižna os, vključno s prisilnim spuščanjem in pomočjo pri speljevanju, aktivacija z "3-krat pritisnite zavoro" (pomoč pri speljevanju deluje do preseženja obremenitve osi za 30 % in do hitrosti največ 25 km/h) #Zavorna naprava Dvovodična zavorna naprava s stisnjenim zrakom Barvno kodirano polaganje vodov za enostavno vzdrževanje. Zavora z vzmetnim akumulatorjem Tele kontrola Razbremenitev osi za enostavno teleskopiranje 2 varno vtične priključne glave spredaj, brez povezovalnega kabla EBS, elektronski zavorni sistem z vtičnico EBS spredaj, brez povezovalnega kabla Preizkusni priključek za tlak zavornega cilindra na modulu EBS, izveden na zunanji strani. Pozor: Prikolico lahko vlečejo samo vlečne enote, ki zagotavljajo delovanje sistema ABS! Z ventilom za dvig in spuščanje + funkcija samodejnega ponastavitve Sistem stabilnosti vozila med vožnjo Prepoznavanje obremenitve osi preko signala EBS-Canbus, za prikaz na zaslonu v kabini voznika, tovornjak mora biti ustrezno pripravljen, ne velja za tovornjake, ki so jih naknadno vgradili (ni kalibrirane tehtnice) #Kolesa in pnevmatike 385/55 R22.5", znamka po izbiri proizvajalca Jeklena platišča, tovarniško srebrna barva #Elektrika 24 voltov, 4 x 3-komorne luči + 1 okrogla luč za vzvratno vožnjo + 1 okrogla meglenka, popolnoma LED izvedba z uporom, stranska rumena LED osvetlitev. Osvetlitev registrske tablice v LED (Opozorilo! Pri nekaterih vlečnih enotah lahko pride do napačne diagnoze, čeprav funkcija deluje) 2 beli pozicijski svetili spredaj v LED 2 bela/rdeča svetili za opozarjanje o izstopu iz voznega pasu zadaj v LED 1 x 15-polna vtičnica spredaj, brez povezovalnega kabla 2 dodatni LED-delovni reflektorji, zadaj, upravljani preko luči za vzvratno vožnjo Pozor: Arhivske slike!

Stanje: novo, lastna masa: 10.000 kg, največja dovoljena obremenitev: 41.600 kg, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading Platform: - Gooseneck, length approx. 4,100 mm with central beam - Extendable loading platform, length approx. 9,500 mm with rear taper approx. 350 mm x 10° and integrated hook-on bar for attaching loose ALU approach ramps - Pneumatic locking system with conical locking bolts and reinforced locking positions - Supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles, Suspension, and Tyres: - BPW axles and suspension, all axles hydro-mechanically forced steered - Mounted on turntable - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - Tyres 235/75 R17.5, twin-mounted Paintwork: - 6-coat surface treatment - Complete steel structure shot-blasted after welding - One coat of zinc-based primer, one coat of adhesion primer - Final paintwork with 2 layers of 2-component (acrylic) paint, single colour in MB 7350 Novagrau, followed by cavity sealing with special wax Steel Structure: - Steel structure made from high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Steel front wall, approx. 1,600 mm high - Round NATO socket at the front connection strip - 3 kW electro-hydraulic unit for controlling hydraulic functions - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets integrated into the outer frame of the gooseneck for stakes approx. 100x50 mm - 1 transverse stake pocket strip mounted in the floor of the gooseneck for stakes approx. 100x50 mm (1x rear on gooseneck) - 2'' kingpin - Mechanical landing legs with 2-speed gearbox and hand crank Fodpfx Afsiuy Nlo Uepn - JOST Module B – static test load = 50,000 kg - On the gooseneck and loading area, approx. 32 mm wooden flooring in ALU-omega profiles - One locking position on the extension, approx. every 500 mm - 10 pairs of recessed folding lashing rings in the outer frame of the loading area, folding outwards - 6 pairs of stake pockets integrated into the outer frame of the loading area for stakes approx. 100x50 mm - 2 transverse stake pocket strips mounted in the floor of the loading area for stakes approx. 100x50 mm - INOX toolbox approx. 1,250 x 500 x 550 mm - Tapered end crossmember of the vehicle, approx. 350 mm 10° - Integrated hook-on bar for loose ALU approach ramps at the rear crossmember of the vehicle - 1 pair of drop tube supports at the rear crossmember - Mudguards on all axles - Central lubrication system with 1 pump - Remote steering from front and rear operable via cable remote control with push button, including single-track monitoring of the axles - Under the gooseneck and at the rear crossmember, left and right, each with a 7-pin socket for warning panels - One 7-pin socket at the rear crossmember - Container locks "TWIST-LOCKS" in the loading area for transport of 2x 20ft and 1x 40ft containers - Radio remote control for rear steering in addition to cable remote control, with 2 indicator lights on the receiver for single-track monitoring - 2 axle load gauges + axle load diagram - 4 warning panels approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM Metallization (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then defined visible areas hot-coated in metallic finish using ZIN

Stanje: rabljeno, skupna masa: 51.600 kg, konfiguracija osi: 3 osi, prva registracija: 05/2019, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.540 mm, skupna širina: 2.540 mm, skupna višina: 2.700 mm, Oprema: ABS, Številka identifikacije vozila: YAFSR3004K0022661 TELESKOPSKO podaljšanje do 8.200 mm Pripravljene tirnice za aluminijaste rampe, BREZ ramp Priprave za pritrditev kontejnerjev: 1 x 20", 2 x 20", 1 x 40", za kontejnerje dolžine 45" DE HU 01.2027 – naslednji pregled SAF osi s kolutnimi zavorami 3 x osi s prisilnim krmiljenjem, hidravlično-mehansko na vrtljivi platformi s kabelskim upravljanjem in radijskim daljinskim upravljanjem Samodejno usmerjanje DVIŽNA OS Mere platforme: 13.600 mm – višina nakladalne površine: 1.100 mm Višina sedla: 980 mm Polmer gibanja zadnje osi: 2.100 mm Vdolbine za nosilce na dnu, vključno z nosilci (ni zagotovljena popolnost) NATO vtičnica Elektro-hidravlična enota Fjdpfx Aszlvtnof Uspn Osvetlitev za širjenje Orodjarna Centralni sistem za mazanje Pnevmatike: 235/75 R 17,5 Nosilec za rezervno kolo, VKLJUČNO z rezervnim kolesom Pridržujemo si pravico do sprememb, medprodaje in napak. Opis služi za splošno identifikacijo vozila in ne predstavlja garancije v smislu zakona o prodaji. Odločilni so pogoji, navedeni v pogodbi o prodaji. Naša ponudba na splošno ne vključuje novega tehničnega pregleda. Če je nov tehnični pregled zaželen, vam z veseljem pripravimo ponudbo naših partnerskih servisov! Vozilo je lahko opremljeno z reklamnimi nalepkami in/ali oznakami. Veljajo naši splošni pogoji dobave in plačila.

Stanje: rabljeno, prevoženi kilometri: 1.519.251 km, moč: 302 kW (410,61 KM), prva registracija: 03/2015, vrsta goriva: dizel, velikost pnevmatike: 355/50R22.5, medosna razdalja: 3.550 mm, gorivo: dizel, zavore: retarder, barva: oranžna, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 5.810 mm, skupna širina: 2.550 mm, Leto izdelave: 2015, Oprema: ABS, AdBlue, asistent za ohranjanje voznega pasu, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, hladilnik, klimatska naprava, nadzor oprijema, parkirni grelec, retarder, tempomat, zapora diferenciala, = Dodatne možnosti in dodatna oprema = - Avtomatski tempomat z nadzorom razdalje - Daljinsko upravljanje centralnega zaklepanja - Dvigni se os - Motorna zavora - Radio - Kolutne zavore - Zaščita pred soncem - Dodatne luči - Sistem za ohranjanje voznega pasu - Avtonomni grelec - Statična klimatska naprava - Orodjarna Fpsdpfx Asz Nth Nof Uen = Opombe = Scania v kombinaciji s prikolico Nooteboom. R410 6x2 Dvigni se os. Zavoro-retarder. Polno zračno vzmetenje. Hladilnik za parkiranje. Nooteboom 18.01.2011 4 x prostor za kolo. Samonastavljiva os / os s sledenjem. = Dodatne informacije = Tehnične informacije Število valjev: 6 Konfiguracija osi Zavore: Kolutne zavore Vzmetenje: Zračno vzmetenje Sprednja os: Dimenzija pnevmatik: 355/50R22.5; Krmilna; Globina profila leve pnevmatike: 40 %; Globina profila desne pnevmatike: 40 % Zadnja os 1: Dimenzija pnevmatik: 245/70R17.5; Globina profila leve pnevmatike: 40 %; Globina profila desne pnevmatike: 40 % Zadnja os 2: Dimenzija pnevmatik: 315/45R22.5; Dvojna pnevmatika; Globina profila leve pnevmatike (notranja stran): 50 %; Globina profila leve pnevmatike (zunanja stran): 50 %; Globina profila desne pnevmatike (notranja stran): 50 %; Globina profila desne pnevmatike (zunanja stran): 50 % Teže Lastna teža: 8.131 kg Nosilnost: 15.869 kg Dovoljena masa: 24.000 kg Vzdrževanje Tehnični pregled: veljaven do 03.2027 Identifikacija Številka modela: R410 6x2 RETARDER + NOOTEBOOOM S = Podatki o podjetju = VSE CENE SO NETO IN VELJAJO ZA IZVOZ. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) Govorimo tudi rusko. Prizadevali si bomo, da bomo navedli čim bolj točne informacije. Kljub temu iz navedenega besedila ne moremo izpeljati nobenih pravic.

Stanje: novo, lastna masa: 15.450 kg, največja dovoljena obremenitev: 65.550 kg, skupna masa: 80.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 21.900 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 925 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimized platform length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 10° Technical fifth wheel load: 30,000 kg. For tractors: 4x2, 6x2, and 6x4 Loading Platform: Double-extendable loading platform, approx. 8,800 mm long with rear taper of approx. 500 mm x 10°. A support table approx. 300 mm wide is welded to the central beam, featuring elongated slots at the front and rear for optional bridge elements that can be hooked in and repositioned Pneumatic locking with conical locking pin and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adjust to the respective platform length Axles and Tyres: BPW axles and suspension, first axle self-steering, all other axles hydraulically and mechanically forced-steered First axle equipped with an electro-magnetic reverse lockout, activated via reverse gear and manually. Technical axle load: 12,000 kg. Air suspension with lift and lower valve Manufacturer by our choice Sockets and Lighting: 24-volt lighting system in accordance with EU regulations ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets Complete HRM metallizing Full steel construction, shot-blasted, then hot-finished with ZINACOR 850 Paintwork: Fedpfxjrigw Rj Af Ujpn 6-stage finishing process: Complete steel construction shot-blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer. Final paintwork in 2 coats of 2K paint in single-tone DB 7350 Novagrau, followed by cavity sealing with special wax Accessories: Detachable front wall made of steel, approx. 400 mm high Connection strip for supply lines to the tractor unit, fitted at the height of the outer frame profile ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets. If your pin configuration deviates from the ISO connector standard, please inform us 3 kW electro-hydraulic power unit for hydraulic functions (excluding hydraulic winches) 1 pair of plug-in ALU sidewalls on the gooseneck, approx. 400 mm high, anodized finish 3.5'' king pin. Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide 2 wheel chocks with holder in front of the front wall Mechanical landing legs with 2-speed gearbox and crank Control valves for hydraulic ramps located on the right side of the vehicle 1 pair of mechanical rear supports Central lubrication system with 1 pump, BEKAMAX brand, using standard grease according to NLGI-2 Removable guard covering the pump(s) of the central lubrication system Remote steering from front and rear, controlled by cable remote with push buttons, with axle tracking control, no installation required on tractor unit Under the gooseneck and on the rear crossmember, one 7-pin socket with holder for warning signs each on left and right. One 7-pin socket on the rear crossmember Manual and documentation One-piece INOX stowage box, approx. 2,480 x 340 x 390 mm, straight design Please note that any special equipment and accessories will increase the unladen weight and correspondingly reduce the payload Warning package: 4 warning boards, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 LED position lights and brackets for beacon.

Stanje: novo, lastna masa: 10.600 kg, največja dovoljena obremenitev: 35.400 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 940 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17,5, barva: siv, Oprema: ABS, Loading area: - Loading deck in extendable design - Loading deck with hardwood planks, rear bevel approx. 500 mm x 8° - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the loading deck's external frame for attaching tension belts Braking system: - Braking system in accordance with EU regulations, with EBS-E (2S2M) Painting: - First-class, durable corrosion protection for the standard shot-blasted welded frame guaranteed by a two-component (2K) zinc-rich primer - High-quality two-component (2K) top coat in solid Novagrey - Rear section metallised and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST mechanical landing gear with 2-speed gearbox, 24t lifting capacity (test load 50t) Steel construction: - Steel structure made from high-strength fine grain steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, LED lighting 24 Volt - Sockets: 2x 7-pin & 15-pin Axles and tyres: - BPW axles, air suspended, with disc brakes (377 mm), with lifting/lowering function - Hydro-mechanically forced steering - Axle tools - Twin tyres 235/75 R 17.5 Accessories included: - Yellow-red air couplings at the galvanised front connection bar - 4 wheel chocks with holder - 2" king pin - Galvanised steel headboard approx. 1600 mm high - White reflective tape on the sides, sliding section and rear in red in accordance with EU regulations - Loading deck with heavy-duty hardwood floor - Rear and front steering by cable - Remote control via push buttons, with single-track monitoring of the axles - With wireless remote control for rear steering Fpsdpfx Afjl Ux Rwj Uon - 9 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading deck - Galvanised folding supports under the loading deck bevel - Sliding mounting rail for aluminium loading ramps at the rear of the vehicle - European reflective panels (red-yellow) at the trailer rear - One mud flap at the trailer rear - Mount for a beacon at the trailer rear - Mounts for warning boards including socket on gooseneck and rear panel, each left and right - Stainless steel toolbox INOX 1,500 x 390 x 810 under the loading deck, right side in driving direction - Central lubrication system BEKAMAX (Pico) with NLHI-2 multipurpose grease and removable protection around pump - 6 pairs of WADER container locks on the loading deck for 1x 20ft, 2x 20ft or 1x 40ft containers, additional locking for one 45ft container in extendable section - 4 pairs of crosswise stake pocket strips mounted in the loading area for 100 x 50 mm plug-in stakes - Lift axle on the first axle, controlled by TEBS, dependent on current axle load and load condition - 80 km/h speed stickers at the rear and on both sides - Four extendable warning boards ca. 400 mm (approx. 423 x 423 mm) with LED position light - Beacon mount on the warning boards - Load gauge for axle load determination, including load diagram - HRM metallisation (High Resistance Metallisation) on the external frame - Complete steel construction shot-blasted, then all defined visible areas metallised with ZINACOR 850 (85% zinc, 15% aluminium) by thermal spraying

Stanje: rabljeno, lastna masa: 10.900 kg, največja dovoljena obremenitev: 43.600 kg, skupna masa: 54.500 kg, konfiguracija osi: > 3 osi, prva registracija: 04/2025, dolžina tovornega prostora: 8.700 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 855 mm, velikost pnevmatike: 245/70 r17.5, barva: siv, Leto izdelave: 2025, obratovalna teža: 10.900 kg, Oprema: ABS, Gooseneck, rigid, center tube design: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Steel floor with anti-slip coating - Including perforated rail for aluminum approach ramps - 2" king pin - Manually operated BPW landing legs - 550 mm long, 8° chamfer at end of gooseneck - Front wall including park position for rear wall, 400 mm high - Spare wheel holder mounted vertically on the front side of the gooseneck - 3 pairs of recessed lashing rings (LC 5,000 daN) in the loading area of the gooseneck - Aluminum side boards, 400 mm high, comprising 2x side boards each 3,150 mm long, and rear board with stanchions (galvanized) - Rectangular aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, center - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, left - 45’ aluminium toolbox with folding lid, lockable, approx. 400 x 800 mm, right Loading platform, single-extendable: - Closed outer frame with cutouts for lashing straps (LC 1,500 daN) - Fixed section at front 700 mm - Steel plate floor with anti-slip coating - Chamfered transition between fixed part and deck for bridging rails and wheel recesses - Excavator trough including elongated holes for load securing (LC 1,500 daN), length approx. 3,850 mm - Prepared for hydraulic ramps (electrical supply) - Rails to widen up to 3,000 mm - 8° chamfered vehicle rear, 550 mm long - Slide system for easy mounting/dismounting of ramps - Continuous mud flap at the rear Fpjdpfsi Ai E Rsx Af Usn - 1 pair of lashing points LC 10,000 daN centrally on the loading area behind the gooseneck - 7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform - 6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the loading platform - 1 pair of lashing points LC 10,000 daN centrally in the rear section of the loading platform - 1 pair of stanchion pocket rails approx. center of the loading area - 1 pair of stanchion pocket rails on the fixed part - 1 pair of stanchion pocket rails behind the last axle Ramps: - Hydraulic double-folding ramps, 2,750+1,500x800 mm - Larch wood surface - Operated by remote control (wired and wireless) - Quick-change ramp (dismantling system) Chassis: - Axle brand: BPW ECO Max - 2 ride heights - 4 axles @ 10 t (technically 12 t) - Twin tires 245/70 R17.5 - 2 x rigid axles and 2 x friction-steered axles - Reverse steering lock for friction-steered axles via reverse gear - Brake system by Knorr (according to EU standards with EBS-E) - Knorr TIM G2 (Trailer Information Module) - RSS (Roll Stability Support) stability control - Load-dependent lift axle on the first axle incl. starting aid (forced lowering of lift axle via TIM possible) Accessories: - 4 wheel chocks with holder - 2 pairs of warning panels 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm - Securing points on gooseneck and on loading platform (alternatively on ramp, if available) included - Plug-in bulkhead at the end of the excavator trough - Electrohydraulic unit for ramp operation - Ramp control by wireless remote - Hydraulic rear support legs for stabilization during loading - 1 pair of additional reversing lights at the rear, activated when reversing - Larch wood widening planks (option)

Stanje: rabljeno, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2015, Visit our website, where you can find our entire vehicle inventory with many more photos and information in several languages. SEL 8054 System Trailer PRSSL-24-1-TRI Tail lift / Steering axle German registration / 1st owner First registration: 06.10.2015 Gross vehicle weight rating (kg): 40,000 Permissible total weight (kg): 40,000 Unladen weight (kg): 9,330 VIN: WSJPRS327FTCA5056 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 BPW axles 3rd TRIDEC steering axle Air suspension Disc brakes BODY STRUCTURE Internal dimensions: Height (m): 2.27 (2.10) Width (m): 2.47 Length (m): 13.65 TAIL LIFT: Dautel Type: DL250010 Year of construction: 2015 Qmax (kg): 2,500 VEHICLE DOCUMENTS: Fpedpfx Aoxpb E Rsf Uon Registration certificate (Fahrzeugschein) Registration title (Fahrzeugbrief) M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC j. (German, Bosnian) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN All efforts have been made to ensure the accuracy of these details; however, we cannot accept liability for errors or omissions. We kindly ask customers to consult the available photos. The stated dimensions are approximate values. Our vehicles are sold as seen, in their current condition. We invite customers to visit our company in order to inspect the vehicle personally. Test drives are also possible. Please be aware that the vehicle is sold with the batteries currently installed. Should you require new batteries, please contact us for pricing information.

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation) Fpodpfxjwvzg Ro Af Uon

Stanje: rabljeno, največja dovoljena obremenitev: 34.440 kg, skupna masa: 46.500 kg, konfiguracija osi: 3 osi, prva registracija: 06/1999, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna širina: 2.550 mm, Skupna masa: 46.500 kg Lastna masa: 12.060 kg Nosilnost: 34.440 kg Skupna dolžina: 13.550 mm - 26.550 mm Širina: 2.550 mm Dodatne informacije: - 3 osi, hidravlično prisilno krmiljenje - priključek za nadstandardno dolge tovornjake - palica za pritrditev rampe - priključni elementi za nakladalno površino - dvojna teleskopska konstrukcija, raztegljiva do 26.550 mm - orodjarna na prikolici - električno vodeno kolo - možnost namestitve dodatnih širitev - hidravlična funkcija za dodatno krmiljenje, upravljanje na daljavo Fedjycpbnopfx Af Uspn - velik komplet pritrdilnih pasov - lastna hidravlična črpalka Na voljo so tudi drugi novi in rabljeni prikolice za nadstandardne tovore. Dodatne informacije najdete na:

Stanje: novo, lastna masa: 14.800 kg, največja dovoljena obremenitev: 61.700 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck with rear chamfer of approx. 750 mm x 10° • 3 pairs of lashing rings • 30 mm thick hardwood flooring Loading Platform: • Extendable loading platform with rear chamfer of approx. 500 mm x 8° • 9 pairs of folding external lashing rings • 1 pair of recessed lashing rings at the front of the loading platform • Cutouts in the outer frame of the loading platform for attaching tension belts • Approx. 48 mm thick hardwood flooring, checker plate above the axles Landing Legs: • JOST mechanically operated landing legs with 2-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: • BPW axles and suspension, 1st axle steering, 2nd and 3rd axle fixed, 4th and 5th axle follow-steering • Technical axle load: 12,000 kg • 1st, 4th, and 5th axles with electromagnetic reverse lock, activated via reverse gear or manually • Tyres: 235/75 R 17.5 3PMSF Brake System: • WABCO brake system in accordance with EU regulations including EBS-E (4S3M) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a two-component (2K) zinc dust primer Fpsdpfema Hf Rox Af Usn • High-quality single-color two-component (2K) topcoat in MB 7350 Novagrau • Rear section metallized and painted in RAL 9010 (Pure White) Steel Construction: • Steel structure made from high-strength fine-grain steels • Steel grades: • S355J2+N/S355MC (yield strength 355MPa) • S690QL/S700MC (yield strength 690MPa) Accessories: • One spare wheel with holder in front of the front wall • 2" king pin • Galvanized steel front wall, approx. 400 mm high • Front galvanized connection strip with yellow-red air couplings • 2 wheel chocks with holders mounted on the front wall • Rear mount on gooseneck for ALU drive-on ramps • Galvanized extendable wideners appx. 230 mm per side • Bracket for a beacon at the rear of the trailer • Galvanized supports under the chamfer of the loading platform • White reflector tape on the sides as per EU regulations, red at the extension and rear • Mounts for warning panels including socket left and right at the gooseneck and rear panel • Detachable ALU sideboards and rear wall on the gooseneck approx. 2,440 x 400 mm • Rear galvanized plug-in stanchions removable (body length approx. 2,560 mm) • 3 pairs of WADER container pockets in the loading platform for a 20ft (30ft) or a 40ft container • 7 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform • Lifting axle on the front axle with TEBS E control according to the current axle load and loading condition • Movable mounting rails for ALU drive-on ramps at the rear of the vehicle • 20 x 20 mm square climbing strips at 200 mm intervals on the outer frame chamfer of the loading platform • BEKAMAX (Pico) centralized lubrication system with NLGI-2 standard grease and removable pump cover • Four extendable warning panels approx. 423 x 423 mm with a position light, extendable by approx. 400 mm • Holder for beacon mounted on the warning panels • European reflector plates (red-yellow) on the rear of the trailer • 80 km/h speed limit stickers at rear and both sides • Axle load gauge with load diagram included • HRM Metallisation (High Resistance Metallisation) of the outer frame • Complete steel structure is shot-blasted, then defined visible surfaces are metallized with ZINACOR 850 (zinc 85% - aluminum 15%) using hot finishing

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, prva registracija: 09/2010, dolžina tovornega prostora: 136.600 mm, širina tovornega prostora: 2.500 mm, skupna dolžina: 206.600 mm, skupna širina: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, stanje pnevmatik: 40 odstotek, barva: drugo, Leto izdelave: 2010, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - 3 osi - dvižna os - zračna vzmetenje - kolutne zavore - krmiljena os = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 385/65 R22.5 Globina profila pnevmatik: 40 % Zadnja os 1: krmiljena Fsdjz Ay Dlspfx Af Uepn Teže Lastna teža: 10.000 kg Nosilnost: 35.000 kg Dovoljena skupna masa: 45.000 kg Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: Na zahtevo Identifikacija Registrska tablica: QKW546

Stanje: novo, skupna masa: 78.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.800 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 850 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, Oprema: ABS, Gooseneck: • Gooseneck in SNT design to optimize loading area length, approx. 3,700 mm long, rear with a bevel approx. 1,000 mm x 10° • For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading Area: • Extendable loading platform, approx. 8,800 mm long with rear bevel approx. 500 mm x 10° • A recess in the platform and rear bevel to accommodate the excavator dipper stick, approx. 3,950 x 580 x 370/450 mm Ramps: • One pair of two-piece steel ramps, approx. 4,350 mm long and 900 mm wide • Hydraulically folding ramp tips • Ramps hydraulically adjustable separately approx. 235 mm outwards and approx. 215 mm inwards • Hardwood decking on the beveled part of the loading area • Ramp with hardwood decking • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the ramp Axles and Tyres: • TWINAXLE-II independent wheel suspension with BPW stub axles, 1st axle steered in advance, all other axles are hydromechanically forced steered • 1st axle with electromagnetic reverse lock via reverse gear and manual activation • Technical axle load: 12,000 kg • Hydr. axle compensation, hydraulic cylinders with shut-off valves • Tyres 245/70 R 17.5 • TPMS tyre pressure monitoring system according to ECE R 141 Accessories Included: • Plug-in steel front wall, approx. 400 mm high • 4 wheel chocks with holder • Front connection bar with yellow-red air couplings • 3 kW electro-hydraulic power pack for hydraulic control, except for hydraulic winches • 1 spare wheel • 2 pairs of screw-in lashing rings Fpjdorvw U Sepfx Af Usn • 1 pair of horizontal lashing rings in the rear area of the gooseneck • On the gooseneck: 1 pair of plug-in ALU side boards, approx. 400 mm high, anodized • On the gooseneck: 1 plug-in ALU rear board, approx. 400 mm high, anodized • Approx. 40 mm thick hardwood decking on the gooseneck, checker plate over the king pin • 3.5" king pin • Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide • Load area locking with conically welded arresting profiles every 250 mm • Incl. pre-tensioning plate • 1 pair of lashing rings on the front cross member • 8 pairs of recessed, fold-out lashing rings in the outer frame of the platform • Extendable (galvanized) widenings approx. 230 mm per side • 1 pair of fixed open wheel recesses up to extension, approx. 700 x 410 mm, in the platform in front of the 1st axle • Wheel recesses with checker plate covering and 15 x 15 mm square climbing strips, approx. every 200 mm • 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm, in the platform between the 1st and 2nd axle • Wheel recesses with 15 x 15 mm square climbing strips and widenings in the lower section • ALU covers for the wheel recesses between 1st and 2nd axle, which can also be used as broadening planks • 1 pair of mechanical rear supports • 20 x 30 mm square climbing strips, approx. every 200 mm on the outer frame of the bevel of the loading area • Central lubrication system with 1 pump, BEKAMAX brand, standard grease as per NLGI-2 • Radio and cable remote control, with 2 indicator lights on the receiver for single wheel control • WABCO Smart Board system • The Smart Board is equipped with an odometer • 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and mounts for rotating beacon

Stanje: rabljeno, največja dovoljena obremenitev: 25.600 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izdelki iz serijske opreme. Celotna oprema na zahtevo. Priznati del Priznati del Light, dolžina cca 4.080 mm Priznati del, hidravlično dvigljiv/spustljiv in odklonljiv Za SZM: 4 x 2 in 6 x 2 Nizka platforma Nizka platforma, zasnovana kot teleskopski most za bager z iztegom spredaj in mehanskim zaklepom. Dolžina x širina cca 6.350 mm x 1.300 mm Podvozek zadaj Podvozek zadaj v kratki izvedbi z zaprtim zunanjim okvirjem in jekleno ploščo z bagerjem, ki je v zadnji polovici zaprta za namestitev rezervoarjev za zrak Osi in vzmetenje BPW osi in vzmetenje, vse osi hidravlično-mehansko prisilno usmerjene Tehnologija osne obremenitve: 12.000 kg Zračno vzmetenje z ventilom za dvig in spuščanje Orodje za os Pnevmatike 235/75 R 17.5 3PMSF, dvojne pnevmatike Indeks obremenitve 143/141J (144/144F) Zavorna naprava Zavorna naprava znamke WABCO EBS-E v skladu z direktivami EU Brez povezovalnega kabla za vlečno enoto Barvanje 6-K končna obdelava Celotna jeklena konstrukcija, peskana po varjenju 1 sloj temeljne barve na cinkovi bazi, 1 sloj prajmerja za oprijem Končni premaz z 2 plastmi dvokomponentne barve (akril), enobarvna v RAL 3002 karminsko rdeči barvi, nato pa zapiranje votlin s posebnim voskom. Platišča v srebrni barvi Dodatna oprema Jeklena sprednja stena, vstavljiva, cca 400 mm visoka Priključna letev za napajalne kable do SZM, nameščena na višini zunanjega profila okvirja Okrogla NATO vtičnica na priključni letev spredaj (Maeler & Kaege VG 96 917) 3 kW elektrohidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov 3 pari vtičnih pritrdilnih obročev na priznatem delu (LC 5.000 daN) 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), spredaj cca 600 mm za sprednjo steno in zadaj na priznatem delu 2 para varjenih pritrdilnih obročev LBS 3 (LC 6.000 daN), na zunanjem okvirju priznačnega dela Na priznačnem delu 2 para vtičnih aluminijastih stranskih desk, cca 400 mm visoke, eloksirana izvedba Na priznačnem delu ena vtična aluminijasta zadnja stena, cca 400 mm visoka, eloksirana izvedba Nad priznačnim delom cca 12 mm debel premaz Delignit Fpjdszlmkwspfx Af Uon 2 palčni kraljevi zatič Hidravlična prečka za oporo priznačnega dela na SZM ali priklopniku Zračna priključnica z zračno pištolo na priznačnem delu Možnost dostopa na priznačni del 2 para vtičnih žepov za nosilce na priznačnem delu, za vtične nosilce cca 100 x 100 mm Na notranji cevi zunaj, navojne luknje za pritrditev vijačnih pritrdilnih obročev M24 (LC 8.000 daN) 2 para vijačnih pritrdilnih obročev M24 (LC 8.000 daN), vključno Na zgornjem pasu zunaj cca vsakih 1.200 mm možnost obešanja ø26 mm za vijačne obroče (LC 8.000 daN) 10 parov pritrdilnih obročev na zunanjem nosilcu RBS-5 (LC 10.000 daN), pod in med podaljški Zložljivi, iztegljivi podaljški, blokirni na cca 2.550/2.750/3.000 mm, vklj. jeklene podloge v deljeni izvedbi, z leseno oblogo Poševnost spredaj na podvošku, cca 350 mm x 12°, vključno z integriranimi nosilnimi letevami spredaj in zadaj za dodatne rampe 2 para pritrdilnih obročev z zadrževalno vzmetjo na prehodu od nizke platforme do bagerja (LC 10.000 daN) 3 pari vtičnih pritrdilnih obročev v zunanjem okvirju podvoška, zložljivi navzven: spredaj in zadaj po 1 par (LC 5.000 daN), v sredini 1 par (LC 10.000 daN) 2 para pritrdilnih obročev LBS-3 (LC 6.000 daN) varjeni nad

Stanje: rabljeno, največja dovoljena obremenitev: 84.000 kg, skupna masa: 105.000 kg, konfiguracija osi: > 3 osi, prva registracija: 08/2000, Oprema: ABS, Vehicle Identification Number: ZCAS64M23Y0012202 HYDRAULIC SUSPENSION - Permissible total weight: 105,000 kg Fifth wheel load: 27,000 kg - Axle loads: 6 x 13,000 kg Unladen weight: 21,000 kg RO HU due Gooseneck: 3,900 mm Saddle height: 1,350 - 1,450 mm Low bed: Length: 13,550 mm (600 mm of which tapered) -- Width: 3,000 mm -- Loading height: 920 mm TELESCOPIC (with sliding table - 500 mm) Insertable rails Axle loads technical: 6 x 13,000 kg ROR axles with drum brakes Axle 1 = LIFTABLE Axles 2, 3, 4, 5, 6 = FORCED STEERED Tyres: 9.5 R 17.5 We expressly reserve the right to make changes, prior sale, and errors. The description serves general vehicle identification and does not constitute a warranty in the legal sense of sale of goods. The details in the purchase agreement are binding. Fpsdpfx Aox Txllsf Uon Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be pleased to provide a quote from our partner workshops! The vehicle may be labelled and/or branded for advertising purposes. Our general delivery and payment terms apply.

Stanje: rabljeno, največja dovoljena obremenitev: 30.660 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 03/2025, Oprema: ABS, Na naši spletni strani najdete celoten naš nabor vozil, ki so na voljo takoj ali v kratkem roku. Izvleček iz opreme: Celotna oprema na zahtevo. Nosilna ploščad * Nizkopodna prikolica s centralnim nosilcem v izvlečni izvedbi * Dolžina približno 6.750 mm * 5 parov zank, ki se odpirajo navzven (LC 5.000 daN) * 1 par zank, ki se odpirajo navzven (LC 10.000 daN) * 1 par zank, nameščenih ležeče zadaj na nosilni ploščadi (LC 10.000 daN) * Dovodne cevi so zaščitene in nameščene v centralnem nosilcu, ter se prilagajajo posamezni dolžini nizkopodne prikolice. "Gansji vrat" * Dolžina približno 3.900 mm * "Gansji vrat" je hidravlično dvigljiv in spuščljiv, prav tako pa se lahko tudi podaljšuje. * Tehnična obremenitev sedla: 23.000 kg Zadnja os * v kratki izvedbi z zaprtim zunanjim okvirjem in pokrovom iz diamantne plošče * Os s koritom za bager, ki je v zadnji polovici zaprt, da sprejme zračne rezervoarje * 2 para zank, ki se odpirajo navzven (LC 5.000 daN) * 1 par zank, ki se odpirajo navzven (LC 10.000 daN) Osi * Osi BPW * Hidro-mehansko prisilno krmiljenje * Tehnična obremenitev osi: 12.000 kg na os * Zračna vzmet z ventilom za dvig in spuščanje * Orodje za osi Pnevmatike * 245/70 R 17.5 3PMSF – proizvajalec po naši izbiri, indeks obremenitve (146/146F) Zavorna sistema * skladno s predpisi EU z EBS-E (2S2M) brez povezovalnih cevi do vlečne enote Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * Kakovosti jekla: S355J2+N/S355MC (meja tečenja 355 MPa) S690QL/S700MC (meja tečenja 690 MPa) Lakiranje Fpodpfszvt Tysx Af Usn * Visoko kakovostni dvokomponentni (2K) premaz * Končni premaz, enobarvni v RAL 3002 karminsko rdeči barvi Vključno z naslednjo dodatno opremo * 2 palčni Königov zatič * Pocinkana jeklena čelna plošča, približno 400 mm visoka * Nosilec za rezervno kolo pred čelno ploščo * Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke * 4 klinasti zavori z nosilcem (± 5 kg) * Pomnoženo krmiljenje spredaj in zadaj s pomočjo kabelskega daljinskega upravljanja, upravljanje s pritiskom gumbov, z nadzorom sledenja osi (brez vgradnje v vlečno enoto) * Elektrohidravlična agregat (± 45 kg) * Rumena odsevna trak, skladno s predpisi EU, na strani, na izvlečni plošči in zadaj na prikolici * 1 lesen blok, približno 500x250x200 mm * Nosilec za aluminijaste nagibne rampe na zadnji strani vozila * Nosilec za rotacijsko luč na zadnji strani prikolice * Blatnik na zadnji strani prikolice * Evropske odsevne table (rdeče-rumene) na zadnji strani prikolice * Na "gansjem vratu" in zadnji plošči na levi in desni strani po en nosilec za opozorilne table, vključno z vtičnico * Priročnik in opis na USB ključu * Nalepka s hitrostjo 80 km/h na zadnji strani in na obeh straneh * Manometer za obremenitev osi za ugotavljanje obremenitve osi, vključno z diagramom obremenitve * Vključno z dodatno opremo – na "gansjem vratu" aluminijaste stranske plošče in zadnja plošča, vstavljive, približno 2.440 x 400 mm (D x V) * Zadnje pocinkane stranske plošče so odstranljive (dolžina nadstavbe približno 2.560 mm) (± 46 kg) * Na "gansjem vratu" ločen zračni priključek z zračno pištolo * 2 delovne luči s stikalom na prikolici, nameščeni na podestu "gansjega vrata" na levi in desni strani * 6 parov stranskih žepov za stranske plošče, približno 100 x 50 mm v zunanjem okvirju nosilne ploščadi * 2 para v zunanjem okvirju osi (± 29 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 262 kg) * Hidravlični priključki od "gansjega vrata" do nizkopodnega priključka z ve

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, Oprema: ABS, Loading platform: - Loading platform in extendable design with pneumatically operated locking mechanism - 2 pairs of lashing rings (LC 5,000 daN) - 1 pair of lashing rings (LC 10,000 daN) - 6 pairs of fold-out lashing rings (LC 5,000 daN) - 2 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension belts Axles and tires: - BPW axles, air-suspended, with disc brakes (377 mm), equipped with lifting/lowering function - Self-steering axles with electromagnetically controlled reverse lock, activated via reverse gear or manually - Axle tools - Tires: 435/50 R 19.5 Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - Premium, durable corrosion protection for the standard shot-blasted welded frame by means of two-component (2K) zinc dust primer - High-quality two-component (2K) top coat in solid Novagrau - Rear end metallized and painted in RAL 9010 (pure white) - Metallic paint not available Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: - Steel structure made of high-strength fine-grained steels. - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations, 24 Volt ASPÖCK-NORDICK (ASS3) lighting Fedsi Dwlwspfx Af Uepn - ASPÖCK-UNIBOX on the front connection console with 24N, 24S & 15-pin sockets - Connections according to ISO standards: - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Accessories included: - Yellow-red air couplings at the galvanized front connection strip - 2 wheel chocks with holder - 2" kingpin - A galvanized steel front wall approx. 1,600 mm high - Yellow reflective tape as per EU regulations, on the sides, on the extension and at the rear of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Loading area with approx. 38 mm thick hardwood floor - 10 pairs of stake pockets for 100 x 50 mm plug-in posts in the outer frame of the platform - 1 spare wheel holder beneath the loading area on the right in the direction of travel - User manual and documentation on USB stick - One mudflap at the rear of the trailer - Bracket for a revolving beacon at the rear of the trailer - On the gooseneck and on the rear panel, left and right, each a bracket for warning boards including socket - One INOX toolbox transversely mounted beneath the platform (1,000x400x2,500mm) - 6 pairs of WADER container locks in the platform for 1x 20ft container, 2x 20ft containers or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container - 3 sets of crosswise post pocket bars mounted in the platform for 100 x 50 mm plug-in posts - 60 km/h speed sticker on the rear - 2 reversing spotlights mounted on the rear panel - Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light - Mounting bracket for rotating beacon on the warning sign - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, the defined visible surfaces then hot-finished with ZINACOR 850 metallisation (zinc 85% - aluminum 15%)

Stanje: rabljeno, skupna masa: 65.000 kg, konfiguracija osi: > 3 osi, prva registracija: 09/2005, Oprema: ABS, Vehicle ID No.: W09S4H44050D04001 – SANH 4-axle including 1-axle DOLLY First registration: 01/09/2005 Next German roadworthiness inspection (HU) due Unladen weight: SANH 16,900 kg / DOLLY 2,700 kg Overall length: 12,600 mm (excluding dolly) Gooseneck dimensions: 3,750 mm – hydraulically adjustable King pin: 3.5 inch Low bed length: 8,600 x 2,530 mm – loading height approx. 900 mm TELESCOPIC up to 12,300 mm Axle loads: 4 x 10,000 kg Fpodpfx Afswadh So Uon Fifth wheel load: 25,000 kg (with dolly: 35,000 kg) BPW Eco axles with drum brakes 4 x hydraulically forced steering axles with radio control Stake pockets incl. stakes Central lubrication system Tyres: 235/75 R 17.5 Spare wheel carrier WITHOUT spare wheel DOLLY = hydraulically suspended Tyres: 235/75 R 17.5 – remaining tread 12 mm Modifications, interim sale, and errors excepted. Description serves for general vehicle identification and does not constitute a warranty in the sense of sales law. The description in the purchase contract is binding. Our offer does not include a new TÜV inspection as standard. If required, we can provide an offer from our partner workshops for a new inspection! Vehicle may have promotional decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902029406, lastna masa: 5.800 kg, največja dovoljena obremenitev: 29.200 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2021, naslednji pregled (TÜV): 06/2027, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 2.790 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.000 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5", barva: srebrn, Na slikah so arhivske slike; vozilo je morda še v uporabi! #Podvozje, sedlo, prevoznik Fino zrnata jeklena varjena konstrukcija v lahki izvedbi, sedelna plošča z zamenljivim 2-palčnim kraljevskim vijakom, korito za jeklene zvitke, dolžina približno 8040 mm, 6 opornikov za jeklene zvitke (notranja velikost žepa približno 82 x 52 mm), pokrov za jeklene zvitke s plastmi, natisnjenimi s sitotiskom, in jeklenimi prečkami, 2 pokrova za trakovi za pritrditev jeklenih zvitkov, vsak približno 293 mm širok, lastna teža približno 13 kg na pokrov, zunanji okvir rahlo nagnjen z "profilom za pritrditev tovora" za pritrditev pritrdilnih trakov, opozorilo! za pritrditev trakov v povezavi s stranskimi ograjami je treba odpreti stranske ograje! 9 parov pritrdilnih ušes, vsak s 5 ton nosilnosti, nameščenih na območju korita za jeklene zvitke, 24 ton, dvostopenjski dvižni mehanizem, upravljanje z ene strani, z ravnim spodnjim delom, brez izravnalne naprave, opozorilo: prosti kot podpore ali prosti radij obračanja v nazaj približno 1930 mm, brez opornikov, iztegljiva lestev zadaj, stranski varovalnik vrat, 2 podstavka z držalom, stranski aluminijasti zaščitni pas, pritrditev na prečni in vzdolžni nosilec za pritrditev aluminijastih letvenikov, spodnji zaščitni pas, aluminijasti polovični blatnik, z zaščitnimi krilci proti brizganju po evropskih standardih, zadnji odbijač, 1 plastična orodjarna škatla, 2 para žepov za okvir, nameščenih v zunanjem okvirju, notranja velikost približno 72 x 42 mm. 2 žepa za okvir, nameščena na sredini dna, notranja velikost približno 72 x 42 mm. #Osnovi + vzmetenje SAF osi s ploščastimi zavorami s premerom diska 430 mm, "osnovje/podvozje lasersko izmerjeno", zmanjšanje obrabe pnevmatik in porabe goriva, osni razmak zamaknjen 1410/1310 mm (kombinirani prevoz) do 44 ton celotne dovoljene teže, zračno vzmetenje, brez dvižne osi. #Zavorni sistem Dvo-vodni zračni zavorni sistem, barvno označene cevi za enostavnejše vzdrževanje, vzmetna parkirna zavora, 2 priključki, ki jih ni mogoče zamenjati, spredaj, brez priključne cevi, EBS proizvajalca Haldex, elektronski zavorni sistem z vtičnico EBS spredaj, brez priključnega kabla. Fedpowhp A Defx Af Ujpn #Kolesa in pnevmatike 385/65 R22.5", polirana aluminijasta platišča, zaščitni pokrovi za vijake koles. #Elektrika 24 voltov, večkomorne luči, rumena LED osvetlitev ob straneh, vključuje vrhunski LED paket, stranske markerne luči z "20 LED diodami na luč" + LED varnostna luč, zgoraj v kotičnem okvirju zadaj, 2 beli pozicijski luči spredaj, LED, 2 bele/rdeče luči za ohranjanje voznega pasu zadaj, 1 x 15-polni vtič spredaj. #Dno Plasti, natisnjene s sitotiskom, debeline približno 30 mm, za visoko točkovno obremenitev za viličarje, do največ 5600 kg. #Sprednja stena / kotični okvir spredaj Kotični okvir iz jekla v volumenski izvedbi, naprava za sprostitev stranske ponjave na sprednji steni, "blokada v primeru trčenja", spodaj znotraj, na višini približno 140 mm, z jekleno zaščito pred trčenjem. #Srednji okvirji 3 pari drsnih okvirjev, drsno nastavljivi po celotni dolžini, s štirimi vložki in dolgim žepom spodaj, 3 pari položajev okvirja. #Zadnja stena / kotični okvir zadaj Kotični okvir zadaj iz jekla do spodnjega roba strehe, pritrdilni element za ponjavo z okroglim cevim in napenjalnikom ponjave, zadnja vrata, 2-krilna, vsaka z 2 notranjimi vrtljivimi ključavnicami, Fliegl "I-Lock" integrirana ključavnica vrat. #Ponjava Ponjava z vgrajenimi horizontalnimi in vertikalnimi trakovi, napenjalniki iz nerjavečega jekla.

Stanje: rabljeno, lastna masa: 11.200 kg, največja dovoljena obremenitev: 36.800 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2025, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Leto izdelave: 2025, Oprema: ABS, For every used semi-trailer, you receive a current & comprehensive inspection and function report. Gooseneck: - Gooseneck with rear bevel of approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood floor Extendable loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - 1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm - Wheel recesses with 15 x 15 mm square climbing strips and widened sections in the lower area - Between the 1st and 2nd axle, 1 pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm - Incl. 3-piece removable galvanized covers over the wheel recesses (width 670 mm) – max. point load 5 t / pc - Recess in the incline and extending into the loading area for accommodating the excavator dipper stick, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - 5 pairs of swing-out lashing rings (LC 5,000 daN) - 2 pairs of swing-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator dipper recess (LC 5,000 daN) - Cutouts in the outer frame of the loading area for attaching tension belts (LC 2,000 daN) Ramps: - One pair of galvanized, two-piece steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood covering - Ramps with hydraulically folding ramp sections, hydraulic lifting unit, and hydraulically adjustable - Maximum load per pair: 40,000 kg Axles and tires: - BPW axles and suspension, 2 rigid axles, 1 trailing self-steer axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock operable via reverse gear and manual activation - Air suspension with raise and lower valve - Axle tools - TPMS tire pressure monitoring system compliant with ECE R 141 - Tires: 235/75 R17.5 3PMSF Accessories included: - Bracket for warning signs on the gooseneck and at the rear, left and right, each with socket - One spare wheel with holder in front of the bulkhead - 2" kingpin - Galvanized steel front wall approx. 400 mm high Fedpoyyldujfx Af Uspn - Yellow-red air couplings at the front galvanized connection rail - 4 wheel chocks with holders - Galvanized, extendable width extensions approx. 230 mm per side - Galvanized folding supports under the incline of the loading area - Cover plates to bridge the gap between ramps and loading area - White reflective tape on sides and on extendable section, rear in red, according to EU regulations - Electro-hydraulic unit at the rear, under the loading area - European reflector boards (red-yellow) on the rear of the semi-trailer - Four extendable warning signs, each approx. 423 x 423 mm with position lamp (extend approx. 400 mm) - Bracket for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side and rear boards approx. 2,440 x 400 mm - Rear, galvanized plug-in stanchions removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container - 3 pairs of stanchion pockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading area - Removable, galvanized intermediate table with 1 pair of WADER container pockets - 20 x 20 mm square climbing strips every 200 mm on the outer frame of the loading area incline - Painted sand layer as anti-slip protection on chequer plates on the gooseneck and loading area - Speed sticker 80 km/h on rear and both sides - Load manometer for determining axle loads, including load chart

Stanje: rabljeno, številka stroja/vozila: 120xxxx, Leto izdelave: 1987, Na zahtevo posredujemo referenčno številko: 24538 Splošne informacije Letnik izdelave: 1987 Znamka/model: Vang SHSL 111 HS Število osi: 3 Fodpfxjz E Dtts Af Ujpn Prva registracija: 14.09.1987 Podrobnosti Dvignjena os na 1. osi Krmiljena os na 3. osi Pnevmatike: Glejte slike Hidravlične nakladalne rampe Hidravlična razširitev do 3 metrov Dolžina zgornje nakladalne površine: približno 4,5–4,7 m Dolžina spodnje nakladalne površine: približno 9 metrov Komplet stranskih ograj/rungal za zgornjo nakladalno površino Mere in teža Dolžina: 1312 cm

Stanje: novo, lastna masa: 15.900 kg, največja dovoljena obremenitev: 63.500 kg, skupna masa: 68.000 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 12.700 mm, širina tovornega prostora: 2.740 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/r17,5, barva: siv, obratovalna teža: 52.100 kg, Oprema: ABS, Gooseneck: Gooseneck in SNT design for optimal load bed length, approx. 3,300 mm long, rear with taper approx. 1,000 mm x 10° Technical fifth wheel load: 23,000 kg For tractor units: 6x2, 6x4, and 8x4 Load bed: Extendable load bed, approx. 9,400 mm long with rear taper approx. 500 mm x 10° A recess in the load bed as well as in the tapering section for accommodating the excavator dipper stick, approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, service lines are protected within the extendable beams and automatically adapt to the respective bed length Axles and Tires: BPW axles and suspension, 1st axle fixed, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lift and lower valve Axle tool 235/75 R 17.5 3PMSF twin tires Load index 143/141J (144/144F) Two-piece steel ramps: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide Hardwood covering Hydraulically folding ramp tips, each ramp hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward Braking system: Fpodomfqi Ispfx Af Uen Braking system by WABCO EBS-E according to EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 for optimal corrosion protection Surface treatment: Entire steel structure automatically blast cleaned with shot blasting after welding Second blasting treatment with corundum for optimal coating adhesion Final painting: 2 coats of 2-component paint in Novagrau, followed by sealing of cavities with special wax Rims in silver-grey Steel construction: Steel construction from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Plug-in steel front wall, approx. 400 mm high Connection rail for service lines to the tractor unit Spiral cable for supplying the electro-hydraulic unit and/or electric winch between trailer and tractor unit, with plug for the electro-hydraulic unit to control hydraulic operations, except for hydraulic winches Outer beam of gooseneck with mounting holes for bolted lashing rings First hole approx. 200 mm from the front, thereafter approx. every 400 mm One mounting hole in the rear upper area of the outer gooseneck beam for a bolted lashing ring Approx. 40 mm thick hardwood floor on the gooseneck, checker plate floor over the kingpin Guide plate on gooseneck for the fifth wheel plate, approx. 500 mm wide On the load bed, continuous and between the axles intermittent approx. 50 mm thick hardwood floor Load bed locking with conically welded locking profiles every 250 mm, including preload plate Slotted holes for attachable and movable bridging elements: on the fixed section behind the gooseneck at the front of the load bed 1 movable intermediate table for the extension tube with large cross-section Control valves for the hydraulic ramps on the right side of the vehicle Central lubrication system with 1 pump, standard grease according to NLGI-2 Radio remote control for steering operation, in addition to cable remote control, with 2 control lights on the receiver for single-track steering monitoring

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: > 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Fedpfx Afjxttc Ao Ujpn Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, lastna masa: 15.420 kg, največja dovoljena obremenitev: 61.080 kg, skupna masa: 76.500 kg, konfiguracija osi: > 3 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 900 mm, velikost pnevmatike: 235/75/r17,5, barva: siv, Oprema: ABS, Gooseneck: Gooseneck with rear chamfer approx. 750 mm x 10° 3 pairs of lashing rings 30 mm thick hardwood flooring Loading Platform: Extendable loading platform with rear chamfer approx. 500 mm x 8° 8 pairs of flip-out lashing rings 1 pair of recessed lashing rings at the front of the loading area Cutouts in the outer frame for securing straps Fjdpfxsl Sl Izj Af Uepn Approx. 48 mm thick hardwood flooring; checker plate above the axles Two-Part Steel Ramps: One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering. Ramps with hydraulically folding ramp sections, hydraulic lifting and hydraulic lateral movement. Max load per pair: 50,000kg. Landing Legs: • JOST landing legs (mechanical) with two-speed gearbox for 24t lifting capacity (50t test load) Axles and Tyres: BPW axles and suspension, 4th and 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axle with electromagnetically operated reverse lock, activated by reverse gear and manually Tyres: 235/75 R 17.5 3PMSF Brake System: Brake system according to EU regulations with EBS-E (4S3M) Sockets and Lighting: Electrical system according to EU standards, 24 Volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Connections per ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by two-component (2K) zinc-rich primer High-quality single-colour 2K topcoat in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel Structure: High-strength fine-grained steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the front wall 2" king pin Galvanized steel front wall approx. 400 mm high Yellow-red air couplings on the galvanized front connection panel 2 wheel chocks with holder on the front wall Mounting at the rear of the gooseneck for ALU approach ramps Bracket for beacon at trailer rear Galvanized supports under sloped area of load floor White reflective tape per EU regulations on sides, extension, and red at the rear Electro-hydraulic unit under the rear of loading platform Warning sign brackets including sockets left/right on gooseneck and rear plate Control valves for ramps mounted right side of trailer Mudflap at rear of trailer Manual and documentation on USB stick 3.5" loose king pin supplied On gooseneck: ALU side boards and rear wall, plug-in approx. 2,440 x 400 mm (LxH) Removable rear galvanized stakes (Body length approx. 2,560 mm) 3 pairs WADER container pockets for 1x 20'/30' or 1x 40' container 6 pairs stake pockets for 100 x 50 mm plug-in stakes in outer frame Galvanized extensions, extendable by approx. 230 mm per side Lift axle on front axle, controlled via TEBS E according to actual axle load and current payload Square climbing strips 20 x 20 mm every 200 mm on outer frame chamfer of load floor Checker plate coverings above the king pin and loading area...