Faymonville F-S43-1Aba Powersteering! nakup rabljenega (26.139)

Stanje: rabljeno, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Izpisek iz opreme. Celotna oprema na zahtevo. * Vratna plošča s poševnimi robovi spredaj, približno 45° in s poševnim zadnjim delom, približno 750 mm x 10°. * 3 pari pritrdilnih obročev (LC 5.000 daN) * Trdna lesena obloga, debeline približno 30 mm. * Nosilna površina v izvlečni izvedbi s poševnim zadnjim delom, približno 1.000 mm x 8°. * 5 parov pritrdilnih obročev, zložljivih navzven (LC 5.000 daN) * 3 pari pritrdilnih obročev, zložljivih navzven (LC 10.000 daN) * 1 par pritrdilnih obročev, nameščenih vodoravno spredaj na nosilni površini (LC 10.000 daN) * Izrezi na zunanjem okvirju nosilne površine za pritrditev zategovalnih trakov (LC 2.000 daN) Ncodpezkx Husfx Ahlew * Trdna lesena obloga, debeline približno 48 mm, nad osmi. * Rebrasta jeklena obloga. * Podporne noge sedelne prikolice JOST podpore (mehanske) z 2-stopenjsko prestavo za nosilnost 24 t (preskusna nosilnost 50 t) * Pnevmatike 235/75 R 17.5 3PMSF * Osi BPW osi, dve fiksni osi, dve osi s sledilnim sistemom, z zračno vzmetjo, z bobnasto zavoro s funkcijo dviganja/spuščanja. Sledilne osi z elektromagnetno blokado za vožnjo v vzvratni smeri, ki se aktivira preko vzvratne prestave ali ročno. * Zavorna naprava WABCO zavorna naprava v skladu z direktivami EU, z EBS-E (4S3M) brez povezovalnih vodov do vlečne enote. * Lakiranje Kakovostno 2-komponentno (2K) lakiranje, enobarvno, v barvi RAL 3002, karminsko rdeča. * Dodatna oprema Nosilec za rezervno kolo pred sprednjo steno (brez rezervnega kolesa). 2-palčni kraljevi zatič. Pocinkana jeklena sprednja stena, približno 400 mm visoka. Na pocinkani priključni letev spredaj so nameščene rumeno-rdeče zračne spojke. 4 klini s pritrdilom na sprednji steni. Nosilec na zadnjem delu vratne plošče za aluminijaste dostavne rampe. Pocinkane zložljive podpore pod poševnim delom nosilne površine. Nosilec za okroglo luč na zadnjem delu prikolice. Rumena odsevna trak v skladu z direktivami EU, stransko, na izvlečnem delu in na zadnjem delu prikolice. Na vratni plošči in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico. Merilnik obremenitve za ugotavljanje obremenitve osi, vključno z grafom obremenitve. * Vključno s posebno dodatno opremo Na vratni plošči so aluminijaste bočne stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V). Galvaniziran orodjarni predal, integriran v poševno vratno ploščo. 3 pari WADER pritrdilnih vreč na nosilni površini za 20' (30') ali 40' kontejner. Drseče pritrdilne letev za aluminijaste dostavne rampe na zadnjem delu vozila. 6 parov pritrdilnih vreč za vstavne prečke, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. Pocinkane razširitve, izvlečne, približno 230 mm na stran. Dvignjena os na sprednji osi z upravljanjem preko TEBS E. 2 LED vzvratni svetili, nameščeni na zadnji plošči. 2 para Ferry obročev pod vratno ploščo in 2 para zadaj. Akustični opozorilni signal pri vožnji v vzvratni smeri. HRM metalizacija (metalizacija z visoko odpornostjo).

Stanje: rabljeno, največja dovoljena obremenitev: 36.700 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2000, B= 12000 mm Teža praznog vozila 11300 kg STZ-V-labudova vrata pomerajuće unapred za utovar sa prednje strane zamenjiv 2" - čep/kraljevski zatik ugrađen hidromehanički sistem upravljanja hidraulična funkcija podizanja i spuštanja, uključujući cilindar za oslonac projektovano za tehničko opterećenje sedla do 18 tona aluminijumske bočne stranice, sa sve četiri strane radijus zakretanja 2400 mm Most platforme sa niskim ležajem dužina ravnog dela 5.000 mm, teleskopski produživa za 2.300 mm širina ravnog dela 2.550 mm visina konstrukcije 280 mm napred kukice za spajanje sa STZ-V-labudovim vratima 2 klinaste rampe za uspon na prednjem delu mosta sa niskim ležajem visina utovara oko 450 mm 3-osovinski trap Ncjdey Hgh Uepfx Ahlow zračno ogibljenje (DxŠ) cca 4.500 x 2.550 mm, uključujući ventil za podizanje i spuštanje, sa 3 prinudno upravljane osovine, Proizvođač: SAF, međuosovinski razmak 2x 1.310 mm Visine vožnje 970 mm Kočioni sistem dvocevni, pneumatski kočioni sistem na sve točkove preklopive proširenja u niskom ležaju visina sedla pod teretom: 1.250 mm sve 3 osovine hidraulički prinudno upravljane sa funkcijom naknadnog upravljanja

Stanje: rabljeno, največja dovoljena obremenitev: 65.350 kg, skupna masa: 78.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2020, With air suspension, hydraulic dual-circuit forced steering (turntable) - Platform design “plateau” for crane counterweight - Rectangular corners, closed outer frame - Front integrated steering linkage in the frame - Turntable-mounted fifth wheel plate with replaceable 3.5” kingpin and adjustable steering wedge - Fifth wheel load: 28,000 kg - Turning radius: 2,700 mm Ncsdpfxex I U Eqj Ahlsw Chassis - 5-axle chassis with air suspension incl. lift and lower valve - Axles manufacturer: SAF - Tires: 445/65 R 22.5 Braking system - Dual-line, all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake using spring-actuated cylinders - ABS (anti-lock braking system) - Lifting capability for the 1st and 2nd axle (in direction of travel) Technical Data Loading area (LxW): approx. 12,500 x 2,550 mm Coupling dimension B: 11,550 mm Load height (unladen, in chassis area): approx. 1,490 mm (at laden fifth wheel height of 1,200 mm) Steering 1st axle: steered ahead 2nd axle: fixed 3rd to 5th axles: hydro-mechanically forced steered (dual-circuit steering) Radio remote control Electrical unit

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.600 kg, največja dovoljena obremenitev: 29.400 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2016, dolžina tovornega prostora: 13.310 mm, širina tovornega prostora: 2.540 mm, skupna dolžina: 13.500 mm, skupna širina: 2.540 mm, skupna višina: 3.700 mm, vzmetenje: zrak, velikost pnevmatike: 235/75R17,5, medosna razdalja: 1.360 mm, barva: modra, zavoro prikolice: prikolica s zavoro, Leto izdelave: 2016, Oprema: ABS, FAYMONVILLE F-S43-1ABA, Nizkopodni priklopnik iz prve roke, redno servisiran in v zelo dobrem stanju! Manj kot 420.000 km. Tehnični pregled (TÜV) nov, Pocinkan in lakiran, Po želji skupaj s vlačilcem MAN TGX 26.440 6x2, letnik 04/2016, 459.000 km, za doplačilo, SAF osi z zračno vzmetenjem, Vse tri osi vodljive. Krmiljenje vseh treh osi pri manevriranju preko hidravličnih cilindrov z radijskim upravljanjem. Skupna masa 42.000 kg, Nosilnost 29.400 kg, Lastna masa 12.600 kg, Skupna širina 2.540 mm, Dolžina krivinskega platoja cca 3.750 mm, Dolžina nizkopodnega platoja cca 9.600 mm, Nakladalna višina cca 900 mm, Višina sedla cca 1.150 mm, Spredaj padalne podpore, Hidravlično podpiranje zadaj preko elektro-hidravličnega agregata, Medosna razdalja 1.360 / 1.360 mm, Centralno mazanje z električno črpalko, Delovne LED luči, Tla: pritisna mrežasta rešetka 30/30/5 mm (vroče pocinkana) po celotni površini nizkopodnega dela, rampah in visokem platoju, Nakladalne rampe: dvodelne rampe posebne izvedbe z mehanskim podaljškom, dolžine cca 2.900 + 1.750 mm, širina rampe cca 850 mm, na sredini zložljive do cca 35 mm. Bočno hidravlično pomične do skupne širine 2.540 mm. Upravljanje ramp preko hidravličnega agregata. Napajanje preko NATO-vtičnice, Hidravlično dvižna rampa na krivini, dolžina cca 3.000 mm za vožnjo na visoki plato po vsej širini vozila, prevozna za 10 t. 2x inox orodjarna, Električna vitel z radijskim upravljanjem, Skupaj 60 težko tovornih pritrdilnih obročev, Pnevmatike 235/75R17.5 10/11/4/4 mm 8/8/7/7 mm 10/10/12 (nove)/12 (nove) mm, Po želji leasing / financiranje – takojšnja obdelava, tudi brez pologa! Več informacij in pogojev na zahtevo. Njdszd Uvxepfx Ahlocw Opis vozila služi zgolj splošni identifikaciji vozila. Podatki, slike in opisi so brez garancije! Opreme je po potrebi treba preveriti posebej. Prodajalec ne prevzema odgovornosti za morebitne tipkarske ali prenosne napake. Pridržujemo si pravico do sprememb in vmesne prodaje. Hvala za vaše zanimanje! Veselimo se vašega obiska. NAŠA STORITEV Z veseljem vzamemo vaše rabljeno vozilo v račun, Carinske tablice do 30 dni vključno z zavarovanjem, EUR-1 + vsa carinska dokumentacija za izvoz, TÜV / SP / UVV / Preverjanje tahografa / Vgradnja OBU, Profesionalna dostava kupcu, Prevoz od letališča Stuttgart / železniške postaje Sindelfingen do nas po dogovoru, Možna je dodatna montaža sestavnih delov ali individualnih prilagoditev po želji kupca po dogovoru.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, lastna masa: 12.900 kg, skupna masa: 49.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2022, Leto izdelave: 2022, Faymonville 2-axle lowbed semi-trailer MEGAMAX 2x12 t PA 2 steered axles Single-extendable, 2 x 12 t pendle axles Overall length: approx. 13,500 mm Overall width: approx. 2,550 mm Neck width: approx. 2,480 mm Load bed width: approx. 2,550 mm Chassis width: approx. 2,550 mm Technically extendable: approx. 4,700 mm Coupling height (loaded): approx. 1,205 mm Loading height (max. loaded): approx. 1,005 mm Load area length: approx. 6,850 mm Chassis length: approx. 2,600 mm King pin distance to front: approx. 1,200 mm Swing radius of tractor unit (rear): approx. 2,300 mm Swing radius (front): approx. 1,800 mm Axle spacings: approx. 1,360 mm Gooseneck: - Gooseneck in SNT design for optimized load floor length, length approx. 3,750 mm - Gooseneck hydraulically liftable/lowerable and detachable - Technical fifth-wheel load: 25,000 kg Boiler deck: - Deep-designed extendable boiler deck "SUPER LOW" design - Length approx. 6,850 mm, with mechanical locking system Rear chassis: - Rear chassis with closed outer frame, chequer plate and continuous prism digger recess, approx. 1,250/700 x 505 mm, open at the rear - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Burst hose valve on axle compensation cylinder with automated RESET function - Hydraulic cylinders with shut-off cocks and front pins to secure lifted position - Technical axle load: 12,000 kg each - Hydraulic axle levelling Brake system: - WABCO brake system, EBS-E according to regulations Chassis tyres: - 245/70 R 17.5 3PMS Metalizing: Nodpfoy Hxd Isx Ahljcw - Complete HRM metallization (High Resistance Metallisation) - Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85%, Alu 15%) Painting: - 6-coat final treatment - Entire steel structure shot-blasted after welding. One layer of zinc-based primer, one adhesion primer. Final coat with 2 layers of 2K lacquer (acrylic) in a single colour, followed by cavity sealing with special wax - Trailer colour: RAL 3002 Carmine Red - Rim colour: Silver Grey - Side board colour: Natural Aluminum Steel structure: - Steel structure made of high-strength fine-grained steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690Q/S700MC (yield strength 690MPa) - MAG welding process according to EN ISO 4063

Stanje: rabljeno, skupna masa: 44.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, Unladen weight: 11,800 kg Width: 12,000 mm Extendable forward for front loading of coupled flatbed deck - Gooseneck in compact design - L x W: 3,900 x 2,480 mm - Interchangeable 2" king pin - Integrated hydromechanical steering - Hydraulic lifting and lowering function, incl. support cylinders - Rated for a technical fifth wheel load up to 24t - 4-sided aluminium drop sides - Steering radius: 2,200 mm Flatbed Deck - Lowbed with external tubes - Flatbed length: 6,750 mm, extendable by 5,500 mm to a total of 12,250 mm - Flatbed width: 2,550 mm - Construction height: 200 mm - Loaded deck height approx. 300 mm with 100 mm ground clearance, or approx. 350 mm with 150 mm ground clearance - Front coupling claws for connection to gooseneck 2-Axle Chassis - Chassis in compact design - Air-suspended chassis (L x W approx. 2,750 x 2,550 mm) incl. lift/lower valve, with 2 forced-steered axles, BPW make, wheelbase 1,330 mm - Chassis with wheel well Brake System - Dual-line full-wheel pneumatic brake system - Progressive central lubrication system Ncjdpfx Aoy U Df Hehljw - Radio remote control - Coupled height when loaded: 1,250 mm - Both axles with hydraulic forced steering

Stanje: novo, največja dovoljena obremenitev: 45.115 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Dodatna vozila na voljo Izvleček iz opreme. Popoln seznam opreme na zahtevo. Tovorna površina: - Tovorna površina z okoli 30 mm debelim trdim lesom - 8 parov zložljivih pritrdilnih obročev (nosilnost LC 10.000 daN) Podporne noge: - JOST mehanske podporne noge z dvojnim menjalnikom, dvižna zmogljivost ca. 24 t (preskusna obremenitev ca. 50 t) Pnevmatike: - 385/65 R 22.5 - TPMS sistem za nadzor tlaka v pnevmatikah po standardu ECE R 141. - Prenos podatkov k tovornemu vozilu poteka prek standardiziranega EBS vmesnika (ISO 11992). - Vozilo mora podpirati prikaz in prenos podatkov. Ncodpfxezhd Nij Ahlsw Premi in vzmetenje: - BPW-premi, tehnično dovoljene osne obremenitve po 10.000 kg - 1. in 3. os hidro-mehansko prisilno vodeni, nameščeni na vrtljivem ležaju, 2. os toga - Zračno vzmetenje s funkcijo dviga in spusta - Orodje za osi Zavorni sistem: - Wabco zavorni sistem po EU predpisih z EBS-E (4S3M), brez povezovalnih vodov k vlačilcu Električna oprema: - Električna oprema po zahtevah EU, razsvetljava 24 V ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX spredaj s priključki 24N, 24S & 15-polni (po ISO: 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098) Jeklena konstrukcija: - Jeklena konstrukcija iz visoko odpornega finega zrnatega jekla - Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje: - Popolna jeklena konstrukcija je po varjenju avtomatsko peskana (s strojnim peskanjem) - Druga obdelava s korundom za boljši oprijem zaščitnih premazov - Končni premaz z dvema slojema 2K barve, enobarvno v RAL 3002 karmin rdeči po standardu RAL 841GL - Zadnji del kovinsko prevlečen in lakiran v RAL 9010 (čista bela) - Platišča v srebrni barvi - Premaz testiran s preskusom v slanem razpršilu po ISO 9227-NSS - Votle dele zaščiteni s posebnim voskom Oprema: - Tovorna površina z okoli 30 mm trdim lesom - 2" King pin - Pocinkana jeklena čelna stena (EN12642-XL), pribl. 1.200 mm visoka - Spredaj rumeno-rdeče pnevmatske spojke na pocinkani priključni letvi - 4 zagozde s pritrjevalom spredaj - Odlagalno mesto za približno 1.000 mm dolge snemljive stranice v osrednjem nosilcu zadaj - Na labodjem vratu in na zadnji plošči levo/desno držalo za opozorilne table vklj. z vtičnico - Rumen odsevni trak po zahtevah EU po obodu in zadaj na priklopniku - 10 parov žepov za vzdolžne stranice (pribl. 100 x 50 mm) v zunanjem okviru - Evropske odsevne table (rdeče-rumene) na zadku priklopnika - Držalo za rotacijsko opozorilno luč na zadku - Blatnik na zadku - Navodila za uporabo in opis na USB ključku - Oznake za maksimalno hitrost 80 km/h zadaj in ob strani - Elektro-hidravlična enota - Vlečna spojka za manevriranje z ojačano nosilno traverso - Manometer za določanje osnih obremenitev vključno z obremenitveno shemo - Centralno mazalni sistem BEKAMAX (Pico) z običajno mastjo NLGI-2 in snemljivim zaščitnim pokrovom - Krmiljenje osi spredaj in zadaj s kablom (daljinsko upravljanje s tipkami), z nadzorom izravnanosti osi (brez namestitve v vlačilcu) - 7 parov pocinkanih snemljivih stranic (pribl. 100 x 50 mm, pribl. 1.000 mm visoke) - 4 prečne vrste žepov za stranice, nameščene prečno v tovorni površini (pribl. 100 x 50 mm) - Spiralni kabel za napajanje elektro-hidravlične enote in/ali električnega vitla (pribl. 35 mm², pribl. 3,5 m dolg, max. 250A) med priklopnikom in vlačilcem z NATO-NATO konektorjem Dostopna lestev...

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.500 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, Oprema: ABS, Extending trailer with total length adjusting from 7,700 to 21,300 mm; electric hydraulic pump; manual pump for hydraulic system; NATO external jump start socket; 3 central stanchion rail(s) on the loading surface; 10 stanchion pockets per side; 10 pairs of heavy-duty lashing rings recessed into the floor; all-round warning light/rear; JOST landing gears; ABS; EBS; axle(s); axles are hydraulically steered; drum brake system; air suspension with lift-lowering device; central lubrication system; vehicle may be decorated or labeled with advertising. Nsdpfx Aheyumi Hjlscw SI86629 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly make you an offer through our partner workshops! The vehicle may be decorated or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing quote for this item. Please contact us!

Stanje: rabljeno, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2007, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 1.500 mm, skupna širina: 2.550 mm, skupna višina: 3.200 mm, Oprema: ABS, Auflieger ausziehbar um 7700 auf 21300 mm Gesamtlänge, elektrische Hydraulikpumpe, Handpumpe für Hydraulikanlage, Fremdstartsteckdose NATO, 3 x Rungentaschenschiene(n) mittig auf der Ladefläche, 10 x Rungenstecktaschen je Seite, 10 Paar Schwerlast - Zurrösen im Boden versenkt, Rundumkennleuchte / hinten, JOST Stützwinden, ABS, EBS, Achse(n), Achsen sind hydr. nachlenkbar, Trommelbremsanlage, Luftfederung mit Hebe- Senkvorrichtung, Zentralschmieranlage, Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein SI86629 Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen. Ncjdpfx Ahjyumitolow Gerne erstellen wir Ihnen für dieses Objekt ein Finanzierungs- oder Leasingangebot. Bitte sprechen Sie uns an!

Stanje: rabljeno, lastna masa: 9.600 kg, največja dovoljena obremenitev: 30.400 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2011, dolžina tovornega prostora: 13.200 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 800 mm, vzmetenje: zrak, velikost pnevmatike: 205/65R17.5, barva: zelen, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles steered, ABS (anti-lock braking system), extendable, lashing rings, attachable loading ramps, front support, rear support, side aluminium underrun protection, storage box. Body: 4-axle low-bed semi-trailer with attachable loading ramps, SAF axles, 3rd and 4th axles steered, 13 pairs of lashing rings, 10 pairs provisions for insertable stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm load height in the low-bed area, low-bed length retracted approx. 9,500 mm, TÜV inspection due, aluminium ramps available at an extra charge of EUR 1,500. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and errors excepted. Njdpfx Aoxxkqzshlocw

Stanje: rabljeno, največja dovoljena obremenitev: 25.260 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2024, naslednji pregled (TÜV): 04/2027, Oprema: ABS, Izvleček opreme Nakladalna površina * Nizkopodno z osrednjim nosilcem v izvlečni izvedbi * Dolžina cca 6.750 mm * 5 parov zložljivih priveznih obročev navzven (LC 5.000 daN) * 1 par zložljivih priveznih obročev navzven (LC 10.000 daN) * 1 par ležečih priveznih obročev zadaj na nakladalni površini (LC 10.000 daN) * Dovodne cevi so zaščitene znotraj osrednjega nosilca in se prilagajajo posamezni dolžini nizkopodnega dela Labodji vrat * Dolžina ca. 3.900 mm * Labodji vrat hidravlično dvižen/spuščen ter snemljiv * Tehnična nosilnost sedla: 23.000 kg Podvozje zadaj * V kratki izvedbi z zaprto zunanjo ramo in rebrasto pločevino * Podvozje z bagerskim izrekom, ta je v zadnji polovici zaprt za namestitev zračnih rezervoarjev * 2 para zložljivih priveznih obročev navzven (LC 5.000 daN) * 1 par zložljivih priveznih obročev navzven (LC 10.000 daN) Preme * BPW preme, hidro-mehansko prisilno vodenje * Tehnična nosilnost posamezne preme: 12.000 kg * Zračno vzmetenje z dvigalnim in spuščalnim ventilom * Orodje za preme Pnevmatike * 245/70 R 17.5 3PMSF Nsdezdxlkjpfx Ahlscw * Znamka po naši izbiri, nosilni indeks (146/146F) Zavorni sistem * V skladu z EU predpisi z EBS-E (2S2M), brez povezovalnih cevi do vlačilca Jeklena konstrukcija * Iz visoko trdnostnih drobnozrnatih jekel * Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Barvanje * Visokokakovosten 2-komponentni premaz (2K) * Končni premaz enobarvno v RAL 3002 karmin rdeči Vključuje naslednjo dodatno opremo * 2-colski kingpin * Pocinkana jeklena prednja stena, cca 400 mm visoka * Nosilec za rezervno kolo pred prednjo steno * Na pocinkani priključni letvi spredaj rumeno-rdeče zračne spojke * 4 zagozde z nosilcem (± 5 kg) * Daljinsko krmiljenje osi spredaj in zadaj prek žične daljinske upravljalnice z usmerjanjem, brez vgradnje v vlačilec * Elektro-hidravlični agregat (± 45 kg) * Rumeni odsevni trak v skladu z EU predpisi na strani, izvleku in zadaj na priklopniku * 1 leseni blok cca 500x250x200 mm * Nosilna letev za alu rampo na zadku vozila * Nosilec za rotacijsko luč na zadku priklopnika * Blatnik na zadku priklopnika * Evropske odsevne table (rdeče-rumene) na zadku priklopnika * Na labodjem vratu in zadnji plošči levo in desno nosilec za opozorilne table s vtičnico * Priročnik in opis na USB ključku * Nalepke za maksimalno hitrost 80 km/h zadaj in obojestransko * Tlačni manometer za določitev obremenitve prem, vključno z diagramom obremenitev Vključuje posebno opremo * Na labodjem vratu alu stranske in zadnja stena, snemljiva, cca 2.440 x 400 mm (D x V) * Zadnji pocinkani vstavljivi stojniki odstranljivi (dolžina nadgradnje cca 2.560 mm) (± 46kg) * Na labodjem vratu ločen zračni priključek z zračno pištolo * 2 delovni žarometi s stikalom na priklopniku, nameščeni na podestu labodjega vratu levo in desno * 6 parov žepov za stojnike cca 100 x 50 mm v zunanjem okviru nakladalne površine * 2 para v zunanjem okviru podvozja (± 29 kg) * Razširitve pocinkane, izvlečne za cca 230 mm na vsaki strani (± 262 kg) * Hidravlični priključki od labodjega vratu do nizkopodnega dela z večsmerno spojko namesto navojnih spojk * Centralni sistem mazanja z 2 črpalkama BEKAMAX (Pico) z univerzalno mastjo NLGI-2 in odstranljivo zaščito okoli črpalke (± 26 kg) * 2 para WADER kontejnerskih žepov na nakladalni površini za 1x20’ kontejner (± 20 kg) * Snemljiva pocinkana vmesna miza z 1 parom WADER kontejnerskih ...

Stanje: rabljeno, številka stroja/vozila: YAFTL208100007948, konfiguracija osi: 2 osi, dolžina tovornega prostora: 10.600 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.010 mm, Leto izdelave: 2008, = Dodatne možnosti in oprema = - Zračno vzmetenje zadaj - Zračno vzmetenje spredaj - Bobnasti zavorni sistem Nsdpfx Ahsziivwslecw = Dodatne informacije = Teže Lastna teža: 11.660 kg Nosilnost: 26.340 kg Dovoljena skupna masa: 38.000 kg Stanje Splošno stanje: povprečno Tehnično stanje: povprečno Vizualno stanje: povprečno Dodatne informacije Stanje pnevmatik spredaj: 70% Sprednje pnevmatike: 245/70 R17.5 Zadnje pnevmatike: 245/70 R17.5 Zadnji pregled: 29.06.2026 Dodatne informacije Za več informacij se obrnite na Lastas Sales.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 05/2008, * Izvlečno * Sledilna krmiljena os Nedox I Uyhopfx Ahljcw * Hidravlične nakladalne rampe * Zračno vzmetenje -----Interna številka vozila: 11555----Pridržujemo si pravico do napak in vmesne prodaje WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp Nemško, Angleško -- WhatsApp Nemško, Angleško, Arabsko

Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our entire range of vehicles that are immediately and soon available on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * MAX810-neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Gooseneck hydraulically liftable/lowerable as well as removable. Length approx. 3,650 mm * Truck hydraulic connection with flow controller (20 l/min), * incl. gallows for suspension of supply lines, tractor unit (SZM) tank must hold at least 80 l, with MAX Trailer coupling pieces; otherwise, coupling pieces to be provided by the customer ex works. * For tractor units: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-lug coupling at the front and approx. 500 mm x 8° chamfer at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. Pendulum axle 2-axle front running gear, pendulum axle * All axles are hydromechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-lug coupling front and rear. * Length: approx. 2,970 mm, chassis width: approx. 2,750 mm Ncedpfx Ahezbfuhslsw * BEKA-MAX central lubrication for a 2-axle running gear with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle running gear. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM, PENDULUM AXLE * All axles hydromechanically forced steered. * Hose burst valve on the axle compensation cylinder with automatic reset function. * Hydraulic cylinders with shut-off valves and pre-pin for securing in raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation. TYRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Final coating of the axles * Painted with two coats of single-colour 2-component paint in DB7350 nova grey. * PAINTING Complete steel structure automatically blasted with shot blasting system after welding. * Second blast processing with corundum for optimal adhesion of the coating system. * HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. * PAINTING Trailer carmine red (RAL 3002) Including the following accessories * Gallows with winch for spare wheel at the front of the gooseneck. * 3.5 inch king pin * Steel front wall approx. 400 mm high. * Plug-in ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodized version. * Control lever on the gooseneck protected by a foldable cover. * Lighting of the controls on the gooseneck with on/off switch. * One 7-pin socket left and right rear on the gooseneck for the warning sign. * Load gauge on the gooseneck for axle load determination on the running gear at front and rear * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the low bed with screw couplings. * Access possibility on the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm, emission level: EU Stage V, max. hydraulic pressure: 280 bar, max. flow: 21 l/min, installation on the gooseneck. * Hydraulic oil tank 100 L, frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between powerpack and plug-in plate on the gooseneck. * Radio remote contr

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle Nsdpsyib Ahsfx Ahlocw * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm Nodpfx Aheyvnd Noljcw * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: Ncjdpfxezahp So Ahlsw * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 30.190 kg, skupna masa: 43.000 kg, konfiguracija osi: 2 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. The following is an excerpt from the specifications. Complete equipment details available upon request. Load area: - Lowbed with external beams, extendable version in SUPER LOW design, length approx. 6,850 mm - Lowbed with fixed hardwood floor, approx. 40 mm thick, with mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current lowbed length - 5 pairs of lashing rings, foldable outward (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: - Gooseneck in SNT design to optimize load area length, approx. 3,750 mm - Gooseneck hydraulically lift/lowerable and detachable - Technical fifth wheel load: 23,000 kg - For tractor units: 4x2, 6x2 Rear chassis: - Rear chassis in short version with closed outer frame and checker plate cover - Chassis with excavator recess, closed in the rear half to accommodate air tanks - 2 pairs of lashing rings, foldable outward (LC 5,000 daN) - 1 pair of lashing rings, foldable outward (LC 10,000 daN) - 1 pair of lashing rings lying flat, at the front & rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced-steered - Technical axle load: 12,000 kg per axle - Air suspension with raise/lower valve Tyres: - Tyres 245/70 R 17.5 3PMSF, manufacturer of our choice - Load index (146/146F) - TPMS tyre pressure monitoring system according to ECE R 141 - Data transmission to tractor via standardized EBS interface (ISO 11992) - For proper display, the tractor must be capable of transmitting and displaying these data Braking system: - Braking system according to EU regulations with EBS-E (2S2M) Electrical system: - Electrical system in accordance with EU regulations, 24-volt lighting ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with turn indicator - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction of high-strength fine-grain steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Entire steel construction automatically shot-blasted after welding - Second blasting with corundum for optimal coating adhesion - Complete vehicle chassis coated with HRM metallization using ZINACOR 850 (85% zinc / 15% aluminium) for premium corrosion protection - Top coat with 2 layers of 2K paint in RAL 3002 carmine red, single-color, according to RAL system 841GL - Rims in silver - Rear section metallized and painted in RAL 9010 (pure white) - No metallic paint possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Including the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high Nsdpfxjxarl Ne Ahlocw - Remote-steered axles from front and rear via cable control with pushbuttons, with single-track monitoring (without installation in tractor unit) - Hydraulic connections from gooseneck to lowbed with multi-coupler instead of threaded couplings - Electro-hydraulic power unit - Prepared for installation of bolted container mounts for 1x 20' or 1x 40' container on outer beams - Without container locks

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length Ncedpoy Uwu Iofx Ahljw * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: rabljeno, številka stroja/vozila: YAFSR31200001xxxx, Leto izdelave: 2012, Prosimo, navedite referenčno številko ob povpraševanju: 23457 Specifikacije: Leto modela: 2012 3 osi Dolžina: 1325 cm Lastna teža: 12.178 kg Dovoljena skupna masa: 59.000 kg 12-tonske osi Krmiljenje na vseh oseh Takoj na voljo Opis: Nsdjzm I Akjpfx Ahlocw 2012 Faymonville Telemax prikolica s fiksno ploščadjo z raztegljivostjo do 27 metrov. Podaljšek znaša 14 metrov. Pripravljeno za dostavo. Tehnični pregled (TÜV): Da EU odobritev do: 28.02.2027 Lastna teža: 12.178 Skupna teža: 59.000 Model: Telemax ravna prikolica z 27 m izvlekom = Dodatne informacije = Za več informacij kontaktirajte ATS Norway.

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Njdpfjg Sk Trox Ahlocw Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) Ncsdpfx Aheg Sk Tvslew S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: novo, lastna masa: 9.600 kg, največja dovoljena obremenitev: 53.400 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 1.340 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, barva: siv, Oprema: ABS, Platform area: - Platform with approx. 30 mm thick hardwood flooring - 10 pairs of folding lash rings (outward folding) Landing legs: - JOST landing legs with 2-speed gearbox, 24 t lifting capacity Axles and tyres: - BPW axles, technical capacity 10,000 kg per axle; first axle fixed, all other axles hydro-mechanically forced-steered, mounted on turntables - Air suspension with raise/lower valve - Axle tools included - Tyres: 385/65 R22.5 Braking system: - WABCO brake system in accordance with EU regulations, with EBS-E (4S3M) Steel construction: - Steel structure made from high-tensile fine-grained steels - Steel grades: - S355J2+N / S355MC - S690QL / S700MC Electrical system: - Electrical system according to EU regulations, 24 Volt lighting - ASPÖCK-UNIBOX on the front connection rail with 24N, 24S and 15-pin sockets - Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - First-class and durable corrosion protection of the standard shot-blasted welded frame is ensured by a 2-component zinc-dust primer - High-quality 2-component topcoat, single-colour in Nova Grey - Rear section metallized and painted in RAL 9010 Accessories included: - Platform with approx. 30 mm thick hardwood flooring - 2" king pin - One galvanized steel front wall approx. 1,200 mm high, EN12642-XL - Yellow-red air couplings at the galvanized connection rail at the front - 4 wheel chocks with holders on the front wall - Storage for 1,000 mm plug-in stanchions in the rear central beam - On the gooseneck and rear panel, left and right, a mounting bracket for warning signs with socket - Remote steering from front and rear, operated via cable remote control with push-buttons; with axle tracking control - Electro-hydraulic power pack - White reflective tape as per EU regulations along the side of the trailer, red at rear - 12 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the load bed - European reflective plates at the trailer rear - One bracket for a rotary beacon at the rear of the trailer - One mudflap at the trailer rear - Manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard NLGI-2 grease and removable protector for the pump Nedpjrq Dlfjfx Ahlocw - TPMS tyre pressure monitoring system: - The towing vehicle must be capable of transmitting and displaying these data for correct readout - Lift axle on the front axle, automatically controlled by TEBS E in accordance with current axle load and trailer loading status - Radio remote control for the remote steering in addition to the cable remote, with indicator lamps on the receiver for axle tracking control - 5 pairs of crosswise stanchion pocket strips on the bed for 100 x 50 mm plug-in stanchions - 80 km/h speed stickers at rear and both sides - Adjustable access ladder mounted left and right in direction of travel - 2 reversing lights mounted at the rear panel - Load gauge for determining axle loads, including load diagram - HRM metallization of the outer frame: complete steel structure shot-blasted, then all designated visible areas hot metalized with ZINACOR 850 (Zinc 85% - Aluminum 15%)

Stanje: novo, lastna masa: 9.450 kg, največja dovoljena obremenitev: 35.550 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 1.560 mm, skupna širina: 2.550 mm, velikost pnevmatike: 385/65 R 22,5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck designed as a loading platform with aluminum chequer plate covering - Front chamfered approx. 45° - Hydraulic lifting arm, lifting and lowering range approx. -280/+250 mm - Two king pin positions at DSR 2,300 and 2,000 mm - Compatible with tractor units: 4x2, 6x2, or 6x4 Loading Bay: - Loading bay, length approx. 9,500 mm, fitted with angle profiles at the bottom for pallet accommodation (distance from king pin to center of axle assembly approx. 8,000 mm) Axles, Suspension, and Tires: - BPW axle stubs with drum brakes and independent wheel suspension, hydraulic axle leveling with lifting and lowering function - Lowering lock on axles in case of suspension hose rupture, designed for maximum pallet height of 150 mm - Tires: 385/65 R 22.5 - TPMS tire pressure monitoring sensors installed in all wheels including spare wheels - TPMS system in accordance with ECE R 141 Surface Treatment: - Complete steel structure, shot-blasted automatically after welding - Second blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K topcoat, single-color in Novagrau (DB 7350) - Paint system tested with salt spray test according to ISO 9227-NSS; cavity sealing with special wax Included Accessories: - Steel front wall, plug-in, approx. 400 mm high - Toolbox with lid, integrated in the rear area of the gooseneck, approx. 640 x 700 x 215 mm - Plug-in ALU rear wall on the gooseneck, approx. 400 mm high, anodized - 1 pair of foldable ALU side boards on the gooseneck, approx. 400 mm high, anodized - 2" king pin - 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) - Front connector strip with yellow-red air couplings; illuminated operation for gooseneck, suspension, and hydraulic bracing, with on/off switch - Mechanical drop-leg supports for approx. 48,000 kg support load Ncodpfx Asygvc Hshlow - Access ladder mounted front right, with 2 plug-in handrails - WABCO Roll Stability Support (RSS) - On the longitudinal beams, 9 pairs of lashing rings (LC 6,300 daN) - On the longitudinal beams, a grating platform level with the load securing rails - Hydraulic preinstallation including control unit for installation of 3 pairs of our hydraulic load restraints - First and last axle, left and right, manually liftable - Storage box behind axle assembly, left and right, splash-water protected - Rear chamfer for easier pallet insertion - Eyes on the rear crossmember for mechanical bracing - 7-pin socket on rear crossmember - Electro-hydraulic unit - 4 wheel chocks with holders - 2 axle load gauges mounted on the left side including axle load chart - 3 pairs of hydraulic load restraints with swivel arm, adjustable on the longitudinal beams - Rear door with cross bracing, hinged left and hydraulically locked right, horizontally lockable at 90°, 105°, and 270° - Folding underrun protection for transporting up to 4 empty standard pallets - 1 spare wheel - License plate bracket with lighting, rear left on trailer - Round NATO socket on the front connector strip (Maeler & Kaege VG 96 917) - Central lubrication system with 1 pump, BEKAMAX brand, standard grease execution

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° Ncodpetvfkfefx Ahlow - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined