Šasija s kabino

VOLVO FH 16.750 6X2 RETARDER WB 430

Stanje: novo, številka stroja/vozila: 56c59c8aba35227ffb44c9f75, lastna masa: 11.350 kg, največja dovoljena obremenitev: 26.650 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further information Jumbo semi-trailer chassis Steel welded construction with closely spaced cross members, reinforced design, low-bed outer frame profile, suitable for the transport of construction machinery up to 32,000 kg and with a maximum machine width of up to 2,550 mm. Fifth wheel plate with interchangeable 2” king pin. Rear taper approx. 1,200 mm and 7°. Ramp roller closed at the top with steel/chequer plate. In the low-bed area: Omega rail mounted laterally below the outer frame for curtain mounting and as a spacer to the lashing mushrooms, not in the wheel area. For hydraulic lift table: additional fixed lightweight outer frame with Omega profile; lift table can be raised with the tarpaulin closed! 24 t 2-speed landing gear, single-side operation, with semi-circular base and straight mounting plate, load compensation, free rear swing radius approx. 1,950 mm. Foldable rear supports 2 wheel chocks with holders Aluminium side underrun protection Quarter-round mudguards in front of and behind each axle Anti-spray flaps behind each axle Steel rear underrun protection Full-width rear spray flap 4 stainless steel toolboxes, w=800/h=350/t=350 mm, polished lockable doors, 2x on front left and 2x on front right before the first axle Hydraulic lift table behind gooseneck, approx. 3,000 mm long, hydraulically raisable to drive over the gooseneck, with mechanical locking in raised position (cylinders angled for ground clearance, Fliegl standard). Operation from front right + additional remote control operation (same device as ramp control). Lift table operable with closed tarpaulin! Curtain mounting in the lift table area on a separate lightweight Omega-profile outer frame; lift table operable with closed tarpaulin. Lashing mushrooms usable even when table is lowered! Lashing eyes Gooseneck: 4 pairs of 5 t lashing eyes recessed into outer frame 2 pairs of lashing mushrooms recessed at the top and on the side of the outer frame Low bed 8 pairs of lashing mushrooms (top and side of outer frame), each 10 t 9 pairs of 5 t lashing eyes recessed into outer frame Axles & suspension SAF drum brake axles Hjdpfx Anji Riw Aomsl Last axle self-steering, with automatic reverse lock via reversing light, additional manual locking on vehicle Air suspension with raise/lower valve and auto-reset function Raise/lower function with quick exhaust 1st axle automatic lift axle, including forced lowering and traction aid, activated by 3x braking (traction aid works up to 30% axle overload and max 25 km/h) Axle lift below recommended driving height; therefore, no warranty against tyre damage Wheels and tyres 235/75 R17.5 From leading manufacturers Twin steel rims, factory silver Braking system 2-line compressed air brake system Spring-type parking brake 2 fail-safe coupling heads (front), no connecting line EBS, Electronic Braking System with front EBS socket, no connection cable Note: Trailer may only be towed by tractors that ensure ABS is working! Axle load detection via EBS in truck, without truck installation (not a certified scale) Electrics 24 volt, multi-chamber rear lamps, yellow LED side marker lighting 2 white LED front position lights 2 white/red lane assist rear lights 1 rotating beacon with bracket, switchable via parking light (detachable light) 2 pairs of double LED warning boards, extendable up to 3,000 mm 2 x 7-pin and 1 x 15-pin fail-safe sockets at front, without connecting cable

Stanje: novo, lastna masa: 12.300 kg, največja dovoljena obremenitev: 37.200 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.300 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system Gooseneck: - Gooseneck with rear chamfer of approx. 750 mm x 10° - 3 pairs of lashing rings - 30 mm thick hardwood flooring Two-part steel ramps: - One pair of galvanized two-part steel ramps approx. 3,185 x 1,420 x 1,250 mm with grating surface - Ramps with hydraulically foldable ramp sections and hydraulic lifting system - Maximum load capacity per pair: 30,000 kg Loading area: - Loading area with rear chamfer of approx. 1,000 mm x 8° - Hardwood flooring approx. 48 mm thick, chequer plate flooring above the axles Axles and tires: - BPW axles and suspension, two rigid axles, one self-steering trailing axle - Air suspension with lift and lower valve - The trailing steering axle with electro-magnetic reversing lock, activated by reverse gear or manually - Tyres 235/75 R17.5 3PMSF Included accessories: - 1 spare wheel with holder - TPMS tyre pressure monitoring system according to ECE R 141 - 2" kingpin - One galvanized steel front wall - Yellow-red air couplings on the galvanized front connection rail - 4 chocks with holder on the front wall - Rear mounting area on the gooseneck for ALU approach ramps - 3 heights of aluminium planks - Galvanized folding supports under the loading area chamfer - Height-adjustable tarpaulin body (3,960 mm) - Galvanized front wall with tensioning mechanism for sliding curtain - Height adjustable by approx. 400 mm - "EDSCHA" brand roof, forward-sliding on ALU roof beam profiles, bolted to front and rear walls - 3 pairs of movable stakes in the loading platform - The superstructure is hydraulically extendable at the rear to the left and right by approx. 750 mm - Sliding roof with high-swivelling portal beam - Sliding curtain with 700 mm length surplus, with tensioning straps spaced approx. 600 mm apart - Height to top of the body: approx. 3,960 mm - Driving with open sliding roof is not permitted and will damage the curtain - Cover plates to bridge the gap between ramps and loading area - Rear electro-hydraulic unit under the loading platform - On gooseneck and ramps, each side with one holder for warning signs including socket - Ramp control valves located on right-hand side of trailer - 6 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - Lift axle on the front axle - Grating surface in the chamfer of the loading area C40/4 (point load 3.4 t on an area of 20 x 20 cm) - One INOX toolbox 565 x 290 x 810 mm, mounted on the right side in the direction of travel between the axles - Painted sand layer as anti-slip protection on the chequer plates on the gooseneck and loading area - BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable cover for the pump - Four extendable warning signs (approx. 400 mm each) approx. 423 x 423 mm with position light Hedpfx Anjtvfkfemjl - Axle load gauge including load diagram - HRM metallization (High Resistance Metallisation) of the outer frame - Entire steel structure shot-blasted, afterwards defined visible surfaces metallized with ZINACOR 850 (zinc 85% - aluminium 15%) hot-refined

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, skupna masa: 32.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • FH long-distance safety cab • Cab auxiliary heater, 2 kW • 33 l coolbox with freezer compartment under bunk • Air suspension on the front axle(s) • Transmission/I-Shift operated via control unit on driver's seat • I-Shift drive modes: Standard, Performance, and Economy • I-See with map-based topographical and traffic data • Eco Cruise Control (cruise control) including brake cruise control • Manual gear selection possible in automatic mode (incl. kickdown) • Adaptive Traction Control • Adaptive Cruise Control (ACC) with collision warning & emergency braking • Lane Keeping Assist • Side collision avoidance & turn assist (both sides) • Driver alertness warning system for fatigue • VEB Volvo Engine Brake • etc. WIESE bodywork for aerial platform and construction machinery transport with hydraulic loading ramps with 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Usable length approx. 9,050 mm - External width 2,550 mm - Platform height (top of floor) approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box-type design - Short crossmember spacing for high point loads - Rear end beveled for low approach angle - External frame profile 90° - Bulkhead in reinforced design - Internal storage box at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN axle load - Above axles: steel toolboxes & outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 tonnes, flush-mounted in outer frame - Longitudinals each with Multi-X contour along the entire length, many lashing points 2.5 tonnes - 4 lashing eyes 8t at the rear, recessed (left/right/center/center) - 4 lashing eyes 8t at front bulkhead, recessed (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 individual/split ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse technology (sliding part remains closed), fixed ramp section placed on hall ramp - Heavy-duty locking bar for transport security (optional with strap lock) - 2 hydraulic rear supports with plates incl. warning buzzer & indicator light in cab - Ramps and supports operated by electro-hydraulics - Control via radio remote and emergency control at control block - Control block mounted in stainless steel toolbox at side of frame - Superwinch, 8.2 t, with approx. 20 m steel cable - Access steps with handrails left and right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, at extra cost) - Side fairings as per sample images (green vehicle), option at extra cost Hsdpfew Itmlex Anmel - Body coating KTL - Rear tow hitch (ball), 3.3t - 4 LED work spotlights - 2 LED rear lights mounted high on bulkhead - 4 LED external work lights on frame for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (outer frame painted to RAL color by request).

Stanje: rabljeno, največja dovoljena obremenitev: 31.300 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2019, dolžina tovornega prostora: 13.600 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.050 mm, skupna širina: 2.550 mm, Oprema: ABS, Meusburger MPG-3 Nizkopodnožno prikolica s ponjavo, krmiljena/dvigljiva os Oprema: zračno vzmetenje * Tehtnica za os * 1. os dvigljiva * 3. os krmiljena * Hidravlična rampa z dodatno podporo in daljinskim upravljanjem * Prehodna rampa * Električni vitel z daljinskim upravljanjem Hodpfx Anowfwd Demjl * Edscha streha * Stranski zaboji za shranjevanje * Rezervno kolo s standardno pnevmatiko * Dodatni žarometi * Izvlečne table za izredne širine Varnost: ABS * EBS * Kolutne zavore Pridržujemo si pravico do napak in predhodne prodaje. Interna številka vozila: 8303

Stanje: rabljeno, največja dovoljena obremenitev: 44.980 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2024, naslednji pregled (TÜV): 09/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt of the equipment list. Complete equipment details available upon request. Chassis, cranked * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, robust outer frame * 4-axle configuration. Wheel arch covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodised aluminum * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special design in the cranked area for maximum low-bed length in combination with AluLeg drop supports instead of telescopic landing gears, maximum rear swing radius of the tractor unit approx. 2,100 mm Special superstructure with rear stake extension * Self-supporting aluminium roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable to approx. 4,200 mm * Three sliding stakes per side with spring-assisted tension relief * Additional central stake locks in the roof beam and parking position, operated via pull cord and spring latch * Mechanically height-adjustable roof lift, adjustment height approx. 400 mm, can be operated from either side or single side without needing to open the opposite side and doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with stake height adjustment * Front overlap at bulkhead for driving under tarpaulin up to an overall height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on each side, 450 mm pockets below, above 4 rows of single pockets * In the high bed, only 3 rows of slats. Intermediate distances evenly distributed Floor * approx. 27 mm special water-resistant bonded beech plywood, non-slip surface * Steel plate in wheel arch area * Forklift accessible per DIN ? standard * Outer frame surface flush Brakes * WABCO air brake system with EBS complying with EC Directive 71/320 EEC incl. PREV (park-release safety valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with odometer and axle load display Axles * 4 x 10,000 kg SAF/Sauer with drum brakes, low loader specification * Air suspension with raise/lower function, total lift approx. 230 mm * Third and fourth axles are friction-steered trailing axles with electrical and mechanical locking Twin tires * 235/75 R 17.5, -16, incl. spare wheel holder. Without spare wheel Paintwork * Chassis in RAL 3002 red, solid color * Central stakes and axles KTL coated black * Corner posts galvanized finish Hodpfx Aolthguenmol * Plastic parts black * Galvanized parts unpainted * Rims in factory silver * Bodywork solid color per RAL shade Included special equipment * Air suspension with ECAS control, operated at the trailer * Oversize signage front and rear, galvanized, infinitely extendable, with marker lights incl. plug-in sockets for revolving beacons (small panels) * Additional unlocking for sliding roof frame from outside * 4 stake adapters for special outer frame profile, for flexible locking of central stakes * PVC sliding tarpaulin, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize/height version, flat hooks, tarpaulin folds, closures with safety pawl / OCS * Left rear telescopic plug-in socket for revolving beacon incl. beacon * Outer frame for machine transport with approx. 64 securing points in 2,000 kg, 3,000 kg and 10,000 kg versions, according to construction release drawing * 1

Stanje: rabljeno, prevoženi kilometri: 455.571 km, moč: 552 kW (750,51 KM), vrsta goriva: dizel, medosna razdalja: 3.200 mm, gorivo: dizel, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2021, Oprema: AdBlue, retarder, Volvo FH 16 750 6x4. Baujahr: 2021. Kilometerstand: 455.571 km. Automatikgetriebe. Leergewicht: 11.075 kg. Zulässiges Gesamtgewicht: 35.000 kg. Zulässiges Gesamtzuggewicht: 70.000 kg. Achslasten: 1: 9.000 kg Hodpfjyxlf Nex Anmol 2: 13.000 kg 3: 13.000 kg Klimaanlage. Standheizung. Schlafkabine mit 2 Betten. Audio-Display. Radstand: 1-2: 3.200 mm 1-3: 4.550 mm Kühlschrank. Elektrische Fensterheber und Spiegel. Multifunktionslenkrad. Retarder. Luftfederung hinten. Digitaler Tachograph. Nabenuntersetzung. NATO-Ausführung. 2 Dieseltanks. Euro 6 AdBlue. Sattelhöhe: 1.250 mm. Bereifung: Vorne: 385/65R22,5 80% Hinten: 315/80R22,5 70% Deutsches Fahrzeug! ID-Nr.: 198. Es gelten die Allgemeinen Geschäftsbedingungen der Firma Heinhuis für alle Inserate, Angebote und Offerten der Firma Heinhuis, alle von der Firma Heinhuis geschlossenen Verträge sowie für die vorangegangenen Verhandlungen. Mit jeglicher Form der Antwort akzeptieren Sie die Geltung der Allgemeinen Geschäftsbedingungen der Firma Heinhuis und erklären, diese zur Kenntnis genommen zu haben. Unsere Preise sind Netto-Exportpreise. = Weitere Informationen = Baujahr: 2021 Leergewicht: 11.075 kg Zuladung: 23.925 kg zulässiges Gesamtgewicht: 35.000 kg = Firmeninformationen = Für weitere Informationen: WhatsApp:

Stanje: dober (rabljeno), prevoženi kilometri: 591.863 km, moč: 375 kW (509,86 KM), prva registracija: 01/2020, vrsta goriva: dizel, velikost pnevmatike: 385/65R22,5, konfiguracija osi: 6x2, medosna razdalja: 4.600 mm, gorivo: dizel, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 12, emisijski razred: Euro 6, vzmetenje: zrak, skupna dolžina: 9.600 mm, skupna širina: 2.550 mm, skupna višina: 3.930 mm, Leto izdelave: 2020, Oprema: ABS, Bluetooth, centralno zaklepanje, električno nastavljivo ogledalo, električno upravljanje oken, greljenje sedeža, klimatska naprava, nadzor oprijema, parkirna klimatska naprava, parkirni grelec, spojka prikolice, tempomat, - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Globetrotter (cab type) - Halogen lamp - Manual - Radio/cassette - Lane departure warning system - Fabric - Blind spot sensor Number of axles: 3, Configuration: 6x2, Curb weight: 10,090 kg, Gross weight: 27,500 kg, Total fuel tank capacity: 730 liters, Trailer coupling, Kingpin diameter: 40 DIN, Chassis height: 14 cm, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Globetrotter, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane Departure Warning, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 375 kW (503 hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Transmission make: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Year of body: 2019, Rotation direction: 1x20, System length: 80 cm, System type: BDF standard, Central locking, Seating layout: 1+1, Seat cover: Fabric, Seat adjustment: Manual Transmission Transmission: VOL, 12 gears, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Hsdpfxewubxke Anmjl Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 2 mm; Tire tread right: 5 mm Axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 18 mm; Tire tread left outer: 19 mm; Tire tread right inner: 18 mm; Tire tread right outer: 19 mm Axle 3: Tire size: 315/80R22.5; Lift axle; Tire tread left: 16 mm; Tire tread right: 16 mm Weights Unladen weight: 10,090 kg Payload: 17,410 kg GVW: 27,500 kg Functional Loading platform height: 123 cm Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 3 Financial information Leasing rate: €843 per month (default, 60 months); Contact us for more information and terms Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, dynamic inventory • Recognizable quality • Competitive pricing • Proper business conduct • Multilingual staff • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • Safety of 'recognizable quality' • And more... Visit our website for special offers and a complete stock list: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request on our website. Ask directly about our European warranty package.

Stanje: rabljeno, prevoženi kilometri: 204.500 km, moč: 478 kW (649,90 KM), prva registracija: 04/2018, vrsta goriva: dizel, velikost pnevmatike: 385/55R22.5, konfiguracija osi: 8x2, medosna razdalja: 4.400 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: drugo, Leto izdelave: 2018, Oprema: ABS, AdBlue, centralno zaklepanje, električno upravljanje oken, hladilnik, klimatska naprava, nadzor oprijema, parkirni grelec, tempomat, zapora diferenciala, = Additional Options and Accessories = - Remote central locking - Air suspension - Hub reduction - PTO (power take-off) - Radio - Reversing camera - Sun visor - Spotlights - Auxiliary heating - Toolbox = Remarks = Copma 1150.8 JIB J6 Year 2018 Winch Hydraulic outriggers Hydraulic extensions 8 + 6 Scanreco radio remote control 4.52 m – 19,400 kg 6.10 m – 14,100 kg 7.72 m – 10,800 kg 9.47 m – 8,500 kg 11.22 m – 7,000 kg 13.82 m – 5,700 kg 15.20 m – 4,900 kg 17.15 m – 4,300 kg 19.52 m – 3,760 kg 22.50 m – 2,450 kg 23.90 m – 2,300 kg 25.50 m – 2,030 kg 27.20 m – 1,510 kg 29.00 m – 1,180 kg 30.90 m – 960 kg 32.80 m – 720 kg = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tyre size: 385/55R22.5; Steered; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: leaf springs Front axle 2: Tyre size: 385/55R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: leaf springs Rear axle: Tyre size: 315/70R22.5; Twin tyres; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80%; Suspension: air suspension Front axle 3: Tyre size: 315/70R22.5; Twin tyres; Tyre tread left inner: 70%; Tyre tread left outer: 70%; Tyre tread right inner: 70%; Tyre tread right outer: 70%; Suspension: air suspension Weights Empty weight: 27,417 kg Payload: 9,583 kg Gross weight: 37,000 kg Functional Crane: Copma Hjdpfxoyxn S Ee Anmel Financial Information Price: On request Identification Type number: FH16 650 8x4 / 115 tm CRANE / TR = Company Information = ALL PRICES ARE NET EXPORT PRICES. (Joris Versteijnen NL-DE-EN) (Wouter Greutink NL-DE-EN-ES-IT) We speak Russian. We make every effort to provide correct information, but no rights can be derived from the provided texts.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT45001013946, lastna masa: 12.100 kg, največja dovoljena obremenitev: 37.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.200 mm, skupna dolžina: 13.750 mm, skupna širina: 2.550 mm, skupna višina: 4.070 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R 17,5 ", največja hitrost: 90 km/h, barva: modra, Leto izdelave: 2024, Oprema: dvižna zadnja plošča, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Semi-Trailer Chassis Suitable for the transport of construction machinery up to 36,000 kg and a maximum external machine width of 2,500 mm, fifth wheel plate with replaceable 2" kingpin. Rear slope approx. 1,500 mm with a 7° angle. Ramp shaft at the top closed with steel/chequer plate. Trailer B-measurement = 12,000 mm Clear swing radius to the rear approx. 2,350 mm Hsdpsylkywofx Anmsl Spare wheel holder with one spare wheel Plastic toolbox In the low-bed area: Omega profile rail laterally underneath the outer frame as a lashing bar for tarpaulin and spacers for lashing points, not in the wheel area. Lashing Points: Gooseneck: - 5 pairs of lashing rings integrated in the outer frame, each rated at 5 t - 2 pairs of lashing pins integrated on top and side in the outer frame, each rated at 10 t Low bed: - 7 pairs of lashing pins integrated on top and side in the outer frame, each rated at 10 t - 9 pairs of lashing rings integrated in the outer frame, each rated at 5 t - 3 pairs of foldable lashing rings additionally recessed in the load floor, each rated at 10 t: 1x before the cranked area, 1x before the 1st axle, 1x behind the 3rd axle Axles & Suspension: - Drum brake axles - Last 2 axles with trailing steering - Air suspension with raise & lower valve + auto-reset function - H & S function with quick air release Wheels & Tires: - 205 / 65 R 17.5 for 8,000 kg axle load, technically at max. 90 km/h - Steel twin wheels Braking System: - 2-line compressed air brake system - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, illuminated and extendable - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Rotating beacon with bracket - LED work light inside on front wall - 2 additional LED work lights at the rear, switched via reversing light Floor: - Designed for a forklift axle load of max. 10,000 kg with at least 300 mm tire width (Deformation possible!) Posts: - 3 pairs of sliding stakes, adjustable along the entire length, with 4-fold plug-in pockets; only the rear 2 fields are equal in length - Pair of stake positions: 1x at the gooseneck, 3x in the low bed Drop-in Slats: - 5 rows of wooden drop-in slats Access Ramps: - Ramp surface with "Mega Grip" made of serrated grating (maximum forklift axle load 9,000 kg at least 200 mm tire width) - Hydraulically operated via own electro-hydraulic unit mounted in a stainless-steel box on the front right, incl. ramp controls, additionally via radio remote control (including rear support control, at customer's risk!). NATO socket on the truck required, including connection cable to truck as spiral cable (must not be connected while driving!). Truck installation not included. - Ramps made of steel across full width, approx. 3,300 mm long + 3 aluminium folding sections approx. 900 mm long making a total ramp length of 4,100 mm; if necessary, additional anti-slip plywood under the aluminium folding parts, max. 9 mm thick for lower approach angle - Ramp load capacity: 26,000 kg, reinforced version, over ramp shaft with steel/chequer plate; ramps secured for driving with top link! Exact equipment specification on request!

Stanje: novo, največja dovoljena obremenitev: 45.250 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our entire range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis, cranked: * Special steel frame made of high-strength fine-grain steels, electrically welded at connection points * Well-dimensioned outer frame, 4-axle configuration * Wheel coverings above the axles with spray mist suppression * All steel parts shot-blasted * Side underride guard made of anodised aluminium, installed * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special configuration in the cranked area for maximum low bed length, combined with AluLeg drop-down supports instead of telescopic support winches, maximum rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension: * DINKEL special body construction Hedpfx Anewx Dbiemjl * Self-supporting aluminium roof rail/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions can be extended for loading and unloading to approx. 4,200 mm * Three sliding stanchions per side with spring-assisted lifting * Additional central stanchion locks in the roof rail and parked position by pull cable and spring bolt * DINKEL mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable on both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments, with adjustment in the stanchions * Front cover at the bulkhead for driving under tarp, total height up to approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminium slats on the side, lower 450 mm pockets, above that 4 rows of individual pockets. In the raised bed, only 3 rows of plug-in slats, with uniform spacing Floor: * Approx. 27 mm special waterproof bonded beech plywood, slip-resistant surface * Steel sheet in wheel arch areas, forklift-rated to DIN standard * Outer frame with flush surface Brakes: * WABCO air brake system with EBS according to EC regulation 71/320 EEC incl. PREV (parking-release safety valve) * Spring-loaded brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator * Incl. WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-bed configuration * Air suspension with lifting and lowering system, total travel approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical locking Twin tyres: * 235/75 R 17.5, 16-ply. Brand of our choice, incl. spare wheel holder * without spare wheel Lighting: * As per EC regulation, incl. LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights in the front wall, inside, at the top Paintwork: * Chassis and body in single colour RAL 3002 Carmine Red * Central stanchions, axles KTL coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver Special equipment included: * 15-pin electrical supply line * Air suspension in ECAS version, operation on the trailer * Oversize signage at front and rear in galvanized, continuously telescopic version with mounted contour lights including plug bases for beacon lights (small panels) * Additional external unlocking for sliding roof frame * 4 stanchion adapters for special outer frame profile, to lock central stanchions as required * PVC sliding tarpaulins, colour similar