Priklopnik sedeža z delovno ploščadjo

FAYMONVILLE MAX210 Telesattel Megatrailer

Stanje: novo, največja dovoljena obremenitev: 34.660 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete stock of immediately and soon available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Loading platform * Double-extendable design with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of fold-out external lashing rings (LC 5,000 daN) * 3 pairs of fold-out external lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing legs * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles, hydro-mechanically forced steering * Air suspension with lift and lower valve Brake system * In accordance with EU regulations, with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction * Made from high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting * Premium and durable corrosion protection for the standard shot-blasted welded frame is ensured by a 2-component (2K) zinc primer * High-quality 2-component (2K) topcoat, single-color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Including accessories * Rear and front remote steering by cable remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holder on the front bulkhead * 2-inch king pin * At the galvanized connection bar at the front, yellow and red air couplings * Yellow reflective tape as per EU regulations on the sides, extension, and rear of the trailer * European reflective plates (red-yellow) at the rear of the trailer Gjdpfx Aok Ugacoghjca * One mud flap at the rear of the trailer * Manual and documentation on USB stick * Loading platform with heavy-duty hardwood floor * 10 pairs of stake pockets for plug-in stanchions (100 x 50 mm) in the outer frame of the loading platform * Mounting bracket for a rotating beacon at the rear of the trailer * Galvanized supports under the slope of the loading platform * A mounting bracket for a rotating beacon at the rear of the trailer * Mounting rail for aluminium loading ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads including load diagram * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable protection for the pumps * Spiral cable to power the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with plug connection (NATO-NATO) * Anti-slip sand layer painted on central beam * 6 pairs of WADER container pockets in the loading floor, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, additional locking point in the extension section for one 45' container * 5 crosswise stake pocket bars mounted in the loading floor for plug-in stanchions 100 x 50 mm * Space for up to 9 pairs of plug-in stanchions ca. 100x50 mm, inside front bulkhead * One INOX toolbox, approx. 1,500 x 390 x 810 mm, under the loading platform on both left and right in the direction of travel * Four warning signs, extendable b

Stanje: novo, največja dovoljena obremenitev: 30.000 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.990 mm, skupna širina: 2.550 mm, skupna višina: 1.010 mm, Leto izdelave: 2025, Oprema: ABS, SCHWARZMÜLLER 3-AXLE PLATFORM SEMI-TRAILER RH100 – EXTENDABLE – For building material and construction machinery transport, NEW VEHICLE GVW (technical): 39 t Axle load (technical): 27 t Kingpin load (technical): 12 t Dead weight approx. 9 t (+/- DIN tolerance) Platform length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm Platform width approx. 2,540 mm Loading height front approx. 1,060 mm with fifth-wheel height approx. 980 mm, rear 1,010 mm Extendable lightweight steel frame welded construction Extension length approx. 4,000 mm, lockable in increments of approx. 500 mm Reinforced design for building material transport, 20 t/5m at center of gravity, construction machinery transport up to 20 t (when retracted) Reinforced U-profile outer frame, 6 mm Tapered cross-members, 4 mm Rear frame chamfer approx. 15°, approx. 500 mm Visual indicator for pneumatic frame locking on both sides, with green control lamp = indicator light for pneumatic frame locking at the front left of the trailer Energy supply chain in the central frame Frame locking with integrated lubrication strip 4 pairs extendable 8 t lashing rings at the rear, 9 pairs 10 t lashing rings in the outer frame, extendable on both sides, foldable outward for over-width securing 10 pairs of rosettes with welded round steel on the lower outer frame 6 pairs of socket housings with reinforcement for form tubes 80x50x5 mm (longitudinally, approx. 3 mm clearance), on both sides of the outer frame 3 cross-member socket housings for form tubes 80x80 mm, at center beams Cross-member socket housings as empty holders for form tubes 6 pairs of recessed container locks for: 2 x 20 ft containers 1 x 20 ft container in center 2 x 20 ft containers 1 x 30 ft container Reinforced rear end plate with continuous hook-in rail for loading ramps Mechanical 2 x 12 t landing gears, one-side operation + floating compensation 2 drop-leg supports at rear SAF Intradisc-B9 axles with disc brakes ø370 mm (19.5" disc), load capacity 9 t/axle, on-road version Axle spacing 1,310 + 1,410 mm Wheelbase 7,650 mm Steerable/reaction-kinematic SAF trailing axle, approx. 10° steering angle, electro-pneumatic reversing lock automatic in reverse gear, plus cab switch with release valve Special axle lift on 1st axle, lifts and lowers automatically depending on weight, with forced lowering, start-assist button in cab / '3 x brake' Odometer 6x tires 435/50 R 19.5, 164J Goodyear Fuelmax T HL (tire load capacity 10 t/axle) 6x steel rims 14.00 x 19.5 Gedpfx Aswfu N Rsghjca Brake system per EC directives 71/320 ECE R13 2-line compressed air braking system EBS system 2S2M, one axle sensed RSS/RSP stability program Spring-loaded parking brake Steel air tanks Air suspension with lift and lower device, total stroke approx. 200 mm Automatic ride height 15 km/h Quick release valves SWIT – Schwarzmüller Intelligent Telematics, 'BASIC' package Axle load display via EBS-Canbus signal Tire pressure monitoring per ECE directive 141 35 mm wooden floor, longitudinal over wheels with steel treadplate covering Wood floor impregnated both sides Reinforced steel front wall approx. 1,800 mm + center supports integrated in front wall 2 lashing eyes on top of corner posts Front steel corner posts integrated in front wall, at end face (free side loading length) 24-volt lighting in accordance with EC directives 76/756/EEC 2 pcs full-LED multi-chamber tail lamps 'Aspöck' with integrated pr...

Stanje: novo, največja dovoljena obremenitev: 36.245 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Selection of equipment features. Full specification available on request. Load Area: * Load deck made of hardwood flooring with rear bevel, approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of folding lashing rings (LC 5,000 daN) * 2 pairs of folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the load area for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspended * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface as per ISO 11992. For correct display, the towing vehicle must be able to receive and display this data. Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on front connection bar with 24N, 24S & 15-pin sockets – as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Entire steel structure automatically shot blasted post-welding using a shot blasting machine * Second blasting with corundum for optimal paint adhesion Gcodpow Tpqqsfx Aghea * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 coats of 2K top coat, single-colour in RAL 3002 carmine red according to RAL system 841GL * Rear section metallised and painted in RAL 9010 (pure white) * Paint system tested in salt spray test as per ISO 9227-NSS * Cavity sealing with special wax * Metallic paintwork not possible Includes the following additional equipment: * Yellow-red air couplings on the galvanised front connection bar * 4 wheel chocks with brackets * 2” kingpin * Load area with heavy-duty hardwood flooring * 1 spare wheel carrier under the deck, right-hand side * Galvanised folding supports under the load area bevel * 9 pairs of stake pockets for plug-in posts, approx. 100 x 50 mm, in the outer frame of the deck * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Sand coating painted onto centre beam as anti-slip system * 1 INOX toolbox mounted transversely under the deck, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the load area, for 1x 20' container, 2x 20' container or 1x 40' container * 3 pairs of crosswise stake pocket rails in the load area, for plug-in posts approx. 100 x 50 mm * Rack for storing max. 9 pairs of plug-in posts (approx. 100 x 50 mm) screwed to the inside of the front wall * 2 INOX toolboxes under the deck left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, mounted transversely under the deck, behind the axles * One warning beacon supplied loose