Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Radmulden

Stanje: rabljeno, največja dovoljena obremenitev: 37.575 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2022, naslednji pregled (TÜV): 10/2025, skupna širina: 2.540 mm, Oprema: ABS, More vehicles available at Excerpt from the equipment list. Full specification upon request. Gooseneck: - Gooseneck with front corners bevelled approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading platform: - Extendable loading platform with rear bevel approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of built-in wheel recesses with cover, approx. 1,610 x 700 x 400 mm (L x W x D) - 1 pair of flat-mounted lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) - Incl. 3-piece removable galvanized covers over the wheel recess – max. point load approx. 3.5 t each Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with raise and lower valve - Axle tools Tyres: - Tyre size: 235/75 R 17.5 Landing legs: - JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t tested load) Brake system: - Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: - HRM metallization (High Resistance Metallisation), complete steel structure shot-blasted to SA2.5–SA3, then hot-finished with ZINACOR 850 (zinc 85% – aluminum 15%) - High-quality 2-component (2K) topcoat, single color RAL 3002 carmine red Included accessories: Gedpfx Agoxfx R Aohjuk - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Galvanized, extendable widenings, approx. 230 mm per side - Galvanized folding supports under the rear bevel of the loading area - Bracket for a revolving beacon at the rear of the trailer - Plug-in aluminum side and rear walls on the gooseneck, approx. 2,440 x 400 mm (L x H), rear galvanized stanchions removable (body length approx. 2,560 mm) - 1 galvanized toolbox, integrated into the gooseneck chamfer - Hardwood rear bumper at the gooseneck rear wall towards the loading platform - 3 pairs WADER container locks in the platform for one 20' (30') or one 40' container - 5 pairs of stanchion pockets for approx. 100 x 50 mm stanchions in the outer frame - Hardwood extension boards, maximum load permissible on an area of approx. 200 x 200 mm up to approx. 3.5 t - Galvanized holder for extension boards, left and right under the platform - Painted anti-slip sand coating on the checker plates, over the king pin and platform - 2 LED reversing lights mounted on the rear crossmember - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - 4 warning signs extendable by approx. 400 mm, approx. 423 x 423 mm, each with an LED position light - Load pressure gauge for axle load calculation, including load diagram - 5 pairs of galvanized plug-in stanchions, approx. 100 x 50 mm, approx. 1,000 mm high - Rack for max. 7 pairs of plug-in stanchions approx. 100 x 50 mm, at the front wall - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with approx. 48 mm thick hardwood covering, including electro-hydraulic unit. Ramp with hydraulically folding ramp sections, hydraulically operated lifting device, and hydraulically adjustable; maximum load ...

Stanje: rabljeno, največja dovoljena obremenitev: 23.500 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 19.100 mm, Oprema: ABS, Faymonville 3-Axle Multimax Low Loader F-S43-1AAF First registration: .23 Gross weight: 35,000 kg Technical permitted gross mass: 58,600 kg Unladen weight: 11,500 kg Payload: 23,500 kg SAF axles: 8,000 kg + 8,000 kg + 8,000 kg Max. capacity: 11,200 kg + 11,200 kg + 11,200 kg Kingpin load / fifth wheel load: 11,000 kg Length: 13,675 mm, extendable to 19,475 mm Width: 2,540 mm / Height: 3,270 mm Godju Ry T Ropfx Aghouk Loading platform: 13,300 mm, extendable to 19,100 mm Wheelbase: 2,900 mm / 1,360 mm Tyres: 245/70R17.5 1st axle liftable / 3rd axle steerable TÜV valid until: Further information available upon request by email! No guarantee for the accuracy of information/errors excepted! Details provided online are non-binding descriptions and do not constitute warranted characteristics. The seller assumes no liability for errors, input mistakes and data transmission errors. Subject to change without notice. Permanent purchase and sale as well as trade-in and rental of crane and lifting vehicles as well as construction and heavy-duty vehicles.

Stanje: novo, največja dovoljena obremenitev: 37.710 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and soon-available vehicles, can be found on our website. Excerpt of the equipment. Complete equipment list available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading platform: - Telescopic loading platform with rear bevel approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Includes 3-part removable, galvanized covers over the wheel recesses (W = approx. 670 mm – max. point load 5 t/each) - 1 pair of lashing rings recessed at front of loading platform (LC 10,000 daN) - 4 pairs of outward-folding lashing rings (LC 5,000 daN) - 3 pairs of outward-folding lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles: - BPW axles and suspension, 2 rigid axles, 3rd axle with trailing steering - Technical axle load: 12,000 kg each - Electromagnetic reverse lockout activated via reverse gear and manually - Air suspension with raise/lower valve, axle tools Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer at our discretion Landing gear: - JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Gujdpfjw Tpq Rox Aghsk Brake system: - Wabco brake system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel structure: - High-strength fine-grain steel construction - Steel quality: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15-pin connection as per ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Painting: - Premium, long-lasting corrosion protection of the standard shot-blasted welded frame ensured with a two-component (2K) zinc-rich primer - High-quality, single-color top coat (2K) in RAL 3002 carmine red - Rear section metallized and painted in RAL 9010 (pure white) Included accessories: - 2-inch kingpin - Galvanized steel front wall approx. 400 mm high - Spare wheel holder in front of the front wall - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks with holders on the front wall - Mounting at the rear of the gooseneck for aluminum loading ramps - Galvanized folding supports under the loading platform's rear bevel - Holder for rotary beacon at the rear of the trailer - TPMS tire pressure monitoring system in line with ECE R 141 - Yellow reflective tape on the sides, sliding extension, and rear of the trailer according to EU regulations - At the gooseneck and rear left/right each, a holder for warning signs including sockets - 1 hardwood impact protection on the back wall from the gooseneck to the loading platform - Galvanized holder for extension boards left and right under the loading platform - 4 pairs of recessed lashing rings along the central beam (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear central beam (LC 10,000 daN) - On the gooseneck, plug-in aluminum side walls and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) - A tool...

Stanje: novo, največja dovoljena obremenitev: 37.635 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete stock of vehicles, including those available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment list available on request. Gooseneck: Gedoxtc Ubepfx Aghsuk * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized, one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramp with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the vehicle length when in transport position Loading platform: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) * Wheel recesses with square climbing strips approx. 15 x 15 mm and extensions at the lower section * Between the 1st and 2nd axle, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes 3-piece removable galvanized covers over the wheel recesses (approx. 670 mm wide) - max. point load 5 t/piece * Recess in the chamfer and extending into the loading platform for excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN). 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the platform for securing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t static test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift and lowering valve * Axle tools Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface per ISO 11992. For correct display, the towing vehicle must be able to relay and display this data Braking system: * WABCO braking system compliant with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel structure: * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system compliant with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections as per ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paint finish: * Complete steel structure automatically blasted with turbine blasting machine after welding * Secondary shot-blasting with corundum for optimum coating adhesion * Top coat: 2 layers of 2K finish, single colour in RAL 3002 Carmine Red, as per RAL system 841GL * Wheels in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested with salt spray test in accordance with ISO 9227-NSS * Cavity sealing with specialist wax Including the following additional equipment: * 2-inch king pin * One ver

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Gsdsg Sk Tvepfx Agheuk Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Godpfxew Tpq Dj Aghouk - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, skupna višina: 1.040 mm, Oprema: ABS, NEW VEHICLE Kässbohrer extendable platform MEGA SPA MR3 with wheel recesses Color: Nova Grey Availability: approx. 6 months after receipt of order # Fifth-wheel load: 18,000 kg # Coupling height: 950 mm # Extendable to 6,900 mm Gujdpfogimw Usx Aghok Axles / Braking system: # BPW axles with 17.5" drum brakes # 3rd axle as trailing steering axle # 1st axle as lift axle # WABCO braking system 4S/3M # 13 x Continental HTR 2 245/70/17.5" on steel rims # Jost landing legs, 24 t capacity # 2 x 7-pin and 1 x 15-pin electrical connections # 24V lighting system by Aspöck # 2 plastic wheel chocks Equipment: # Wheel recesses with hardwood covers # Non-removable sliding table, 300 mm length # 1 pair of aluminum loading ramps, 2,400 mm long, 600 mm wide, capacity 32,000 kg included # 30 mm hardwood floor # Oversize transport kit (4x galvanized oversize plates with LEDs + 1x rotating beacon) # Toolbox mounted on the right in direction of travel # 6x2 holes for container locks, suitable for transporting 1x20", 1x40" or 1x45" containers # 4 removable container twistlocks # Stake holders mounted on the front wall, without stakes # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 8 x 2 lashing rings (10 t), 5 x 2 lashing rings (8 t), 108 lashing points in the outer frame, each rated to 2 t # Storage box for aluminum ramps under the chassis behind the third axle # Front wall 1,500 mm + 500 mm high, with Code XL certificate! # Chassis KTL coated and painted in MB7350 nova grey # Front wall MB7350 nova grey ----Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Stanje: rabljeno, moč: 75 kW (101,97 KM), vrsta goriva: dizel, barva: rdeča, dvižna višina: 14.000 mm, velikost pnevmatike: 15.5 / 80 - 24, stanje pnevmatik: 98 odstotek, tip droga: teleskopski, širina izkopne žlice: 1.100 mm, Leto izdelave: 2016, obratovalne ure: 1.435 h, nosilnost: 4.000 kg, Oprema: kabina, pogon na vsa štiri kolesa, vilice za palete, Rough terrain telescopic handler MANITOU, model: MT 1440 100 P ST3B S2 – 4x4x4, first commissioning: 2017, LIFTING CAPACITY: 4,000 kg, LIFTING HEIGHT: 14.00 m, LONG FORKS (fork length: 1,200 mm / carriage width: 1,100 mm), LOAD BACKREST, QUICK COUPLER, ADDITIONAL HYDRAULICS, 4-cylinder PERKINS turbo diesel engine (102 HP / 75 kW at 2,200 rpm), FOUR-WHEEL DRIVE and FOUR-WHEEL STEERING (4x4x4) – CRAB STEERING, hydraulic outriggers (2x), SIDE SHIFT – LEVELING SYSTEM, OVERLOAD WARNING DEVICE, spacious cabin (tinted glass), WINDSCREEN GUARD, ROPS / FOPS, KAB comfort seat, WARNING ALARM / WARNING LIGHT, trailer hitch, road lighting, windscreen wipers (4x), external mirrors (3x), heating/ventilation, OPERATING MANUAL (in German). Tires: BKT OFF-ROAD TIRES (15.5/80 – 24) – approx. 98% all around. Transport dimensions: Length approx. 7,330 mm (approx. 6,130 mm without forks), width approx. 2,430 mm, height approx. 2,540 mm. Price is net export, domestic sales plus VAT. FINANCING AVAILABLE / WORLDWIDE TRANSPORT AT ATTRACTIVE RATES / FOR EXPORT ONLY THE NET PRICE IS PAYABLE (!) Gedpfjuq Hzgsx Aghjuk

Stanje: novo, lastna masa: 9.500 kg, največja dovoljena obremenitev: 35.500 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R 19.5, barva: siv, obratovalna teža: 9.500 kg, Oprema: ABS, Loading platform in extendable design: Loading platform with hardwood planks, rear bevel approx. 1,000 mm x 8° 1 pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) Guodpfxok Eammo Aghok 6 pairs of fold-out lashing rings on the outside (LC 5,000 daN) 2 pairs of fold-out lashing rings on the outside (LC 10,000 daN) Cut-outs in the outer frame of the loading area for attaching tensioning straps (LC 2,000 daN) Brake system: Brake system as per EU regulations with EBS-E (2S2M) Paintwork: Premium, long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc-rich primer High-quality single-colour 2-component (2K) top coat in Nova grey Rear section metallized and painted in RAL 9010 (Pure White) No metallic paint possible Landing gear: JOST mechanical landing gear with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction from high-tensile fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, 24 volt lighting Sockets: 24N, 24S & 15-pin Axles and tyres: BPW axles, air suspension, with disc brakes (377 mm), with lift/lower function Trailing steering axles with electro-magnetic reversing lock, actuated via reverse gear or manually Axle tool Tyres: 435/50 R 19.5 Accessories included: At the galvanized front connection strip: yellow-red air couplings 4 wheel chocks with brackets 2" kingpin Galvanized steel front wall approx. 1,600 mm high, EN12642-XL White reflective tape to EU standards on the sides, extension section and red at the rear Loading platform with heavy-duty hardwood floor 9 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform 1 spare wheel holder under the platform on the right (direction of travel) Galvanized folding supports under the rear slope of the loading area Sliding mounting rails for ALU loading ramps at the rear of the vehicle European reflective plates (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer Bracket for a rotating beacon at the rear of the semi-trailer At the gooseneck and on the rear panel left and right, each with a bracket for warning panels including socket One HDPE toolbox 620x360x610 under the platform on the left (direction of travel) 4 pairs of WADER container locks in the platform for 1x 20ft container or 1x 40ft container; additional locking position in the extension for a 45ft container 3 pairs of transverse stake pocket rails on the platform for 100 x 50 mm plug-in stanchions Lift axle on the front axle with control via TEBS E, depending on current axle load and loading condition Speed stickers 80 km/h on the rear and both sides Four warning boards extendable by approx. 400 mm, approx. 423 x 423 mm, with LED position light. Mounting for rotating beacon on warning boards Load gauge including axle load diagram HRM metallization (High Resistance Metallisation) of the outer frame Complete steel structure shot blasted, then specified visible surfaces metallized

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.180 kg, skupna masa: 2.700 kg, konfiguracija osi: 2 osi, prostornina tovornega prostora: 1,5 m³, Leto izdelave: 2024, Standard Equipment Basic Series models always in stock Vacuum Suction Tank STS VR-1.5 Rear Tipper 1,500 L Tank • 1,500-liter tank capacity • Rear tipper with wired remote control • Tank hot-dip galvanized Gusdpfx Aoutcq Asghsk • Tank slightly inclined to the rear for easier cleaning • Side rinsing opening in the tank for removing dirt or blockages without opening the tank lid • Tank lid opens completely towards the passenger side and is secured with hook bolts • Two integrated safety levels as standard to prevent compressor damage • Siphon separator • Overflow with 2 balls and sight glass • Manometer mounted on the suction assembly with protective guard • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor with 3,500 L air capacity • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • B&S Industrial Engine Vanguard 13 HP • Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank • Internal suction hose to protect the engine compartment • Silencer for vacuum compressor with oil collector • Stainless steel heat shield above the exhaust • 1 liter biodegradable compressor oil stored in oil bottle holder • 5L petrol canister in bracket • Standard funnel with long neck for easy changing and refilling of engine oil • All engine components and accessories stored in lockable engine box Chassis • Self-supporting chassis, fully hot-dip galvanized • Low-loader tandem chassis 2.7t • Track width identical to car and Sprinter for optimal driving • Lowest possible center of gravity for the suction tank • 2 axles each with 1,350 kg load capacity, independent wheel suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with lamp housings • Stake brackets for quick securing of suction hoses with rubber bands • Storage space for tools and accessories between engine enclosure and tank body Suction Tank • Overrun brake with reverse automatic • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin cable connection Connections and Hoses • 2x suction hoses (3”) 5m long with Perrot couplings • 1x suction lance 3” (1,500 mm long) • 1x Perrot connection (3”) on the lower part of the tank lid • 1x Perrot connection (3”) on the right-hand side in the direction of travel If you are looking for something other than this unit, please do not hesitate to contact us directly. Our in-house vehicle construction division can fulfill nearly every requirement. For further detailed information and/or photos, please contact us directly. You will also find a large selection of other vehicles for SALE or RENT with us. Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our terms and conditions and excludes any warranty.