Priklopnik sedeža z delovno ploščadjo

SCHWARZMÜLLER 3Achs Tele Rampen TwistLock40+2x20"SAF Lenk+Lift

SCHWARZMÜLLER 3-AXLE PLATFORM SEMI-TRAILER RH100 – EXTENDABLE –
For building material and construction machinery transport, NEW VEHICLE
GVW (technical): 39 t
Axle load (technical): 27 t
Kingpin load (technical): 12 t
Dead weight approx. 9 t (+/- DIN tolerance)
Platform length approx. 13,500 mm = front approx. 4,150 mm, rear approx. 9,350 mm
Platform width approx. 2,540 mm
Loading height front approx. 1,060 mm with fifth-wheel height approx. 980 mm, rear 1,010 mm
Extendable lightweight steel frame welded construction
Extension length approx. 4,000 mm, lockable in increments of approx. 500 mm
Reinforced design for building material transport, 20 t/5m at center of gravity, construction machinery transport up to 20 t (when retracted)
Reinforced U-profile outer frame, 6 mm
Tapered cross-members, 4 mm
Rear frame chamfer approx. 15°, approx. 500 mm
Visual indicator for pneumatic frame locking on both sides, with green control lamp = indicator light for pneumatic frame locking at the front left of the trailer
Energy supply chain in the central frame
Frame locking with integrated lubrication strip
4 pairs extendable 8 t lashing rings at the rear, 9 pairs 10 t lashing rings in the outer frame, extendable on both sides, foldable outward for over-width securing
Rcedewfu N Repfx Af Noh
10 pairs of rosettes with welded round steel on the lower outer frame
6 pairs of socket housings with reinforcement for form tubes 80x50x5 mm (longitudinally, approx. 3 mm clearance), on both sides of the outer frame
3 cross-member socket housings for form tubes 80x80 mm, at center beams
Cross-member socket housings as empty holders for form tubes
6 pairs of recessed container locks for:
2 x 20 ft containers
1 x 20 ft container in center
2 x 20 ft containers
1 x 30 ft container
Reinforced rear end plate with continuous hook-in rail for loading ramps
Mechanical 2 x 12 t landing gears, one-side operation + floating compensation
2 drop-leg supports at rear
SAF Intradisc-B9 axles with disc brakes ø370 mm (19.5" disc), load capacity 9 t/axle, on-road version
Axle spacing 1,310 + 1,410 mm
Wheelbase 7,650 mm
Steerable/reaction-kinematic SAF trailing axle, approx. 10° steering angle, electro-pneumatic reversing lock automatic in reverse gear, plus cab switch with release valve
Special axle lift on 1st axle, lifts and lowers automatically depending on weight, with forced lowering, start-assist button in cab / '3 x brake'
Odometer
6x tires 435/50 R 19.5, 164J Goodyear Fuelmax T HL (tire load capacity 10 t/axle)
6x steel rims 14.00 x 19.5
Brake system per EC directives 71/320 ECE R13
2-line compressed air braking system EBS system 2S2M, one axle sensed
RSS/RSP stability program
Spring-loaded parking brake
Steel air tanks
Air suspension with lift and lower device, total stroke approx. 200 mm
Automatic ride height 15 km/h
Quick release valves
SWIT – Schwarzmüller Intelligent Telematics, 'BASIC' package
Axle load display via EBS-Canbus signal
Tire pressure monitoring per ECE directive 141
35 mm wooden floor, longitudinal over wheels with steel treadplate covering
Wood floor impregnated both sides
Reinforced steel front wall approx. 1,800 mm + center supports integrated in front wall
2 lashing eyes on top of corner posts
Front steel corner posts integrated in front wall, at end face (free side loading length)
24-volt lighting in accordance with EC directives 76/756/EEC
2 pcs full-LED multi-chamber tail lamps 'Aspöck' with integrated pr...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.