Polpriklopnik z nizko nakladalno ploščadjo

Doll Panther S3E Tele / Swiss-Vehicle

Stanje: novo, lastna masa: 22.700 kg, največja dovoljena obremenitev: 79.300 kg, skupna masa: 102.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.850 mm, višina nakladalnega prostora: 920 mm, velikost pnevmatike: 245/70 R 17.5, barva: siv, obratovalna teža: 22.700 kg, Oprema: ABS, Gooseneck: - Gooseneck in SNT design to optimize load platform length, approx. 3,750 mm long, rear with chamfer approx. 850 mm x 10° - Hydraulically liftable and lowerable, stroke ± 250 mm including hydraulic connection linked to the hydraulic axle compensation of the first two axles - Open in the rear third - For tractor units: 6 x 4 and 8 x 4 Gbedpjk Af Svsfx Akqsr Load platform: - Extendable load platform, approx. 11,000 mm long with rear chamfer approx. 500 mm x 10° - Recess in the platform and into the chamfer for receiving the excavator dipper stick, approx. 4,240 x 900 x 440 mm - Pneumatic locking with conical locking pin and reinforced locking positions, supply lines protected within the extendable beams, automatically adapting to the actual platform length Ramps: - One pair of two-piece steel ramps approx. 4,650 mm long and 900 mm wide - Hydraulically foldable ramp tips - Ramps individually hydraulically adjustable approx. 235 mm outward and approx. 215 mm inward - 25 mm "Super Grip" rubber flooring and approx. 5 mm checker plate as additional reinforcement on the chamfered section of the platform - Square climbing strips 20x30 mm, spaced approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - PA-X axle system, all axles hydro-mechanically forced steered - Steering performance of the first two axles can be optimally adjusted to the platform length, both mechanically and hydraulically - Hose rupture valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and pre-fitted locking pins for securing in raised position - 245/70 R 17.5 3PMSF Accessories included: - Plug-in steel front wall, approx. 400 mm high - Supply line connection strip for tractor unit, mounted at the height of the outer frame profile - 1 spare wheel - Outer beams of gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from front, then every approx. 400 mm - 2 pairs of screw-in lashing rings included - Chequer plate covering over the gooseneck - On gooseneck: 1 pair of removable anodized ALU side walls, approx. 400 mm high - On gooseneck: 1 removable anodized ALU rear wall, approx. 400 mm high - 3.5" king pin / 2" king pin mounted - Guide plate of the gooseneck for fifth wheel plate, approx. 500 mm wide - 4 chocks - 4 axle load gauges - Mechanical drop tube supports at the front - 1 one-piece INOX toolbox, approx. 2,480 x 340 x 390 mm - Mechanical drop tube supports at the front - Continuous steel deck with baked-in sand layer as anti-slip protection on the platform - 1 intermediate table, approx. 500 mm wide, for the extension, with slotted holes for insertable and relocatable bridging elements - Sand coating on support surfaces of the intermediate table - Mechanical locking for securing the intermediate table on the extension - 8 pairs of stake pockets in the outer frame - Extendable (galvanized) widenings, approx. 230 mm per side - 1 pair of hydraulic rear supports - Central lubrication system - 1 reversing spotlight each on left and right rear of the vehicle - 3 kW electro-hydraulic power unit - Loose widening planks in reinforced steel U-frame - Radio and cable remote control - 4 warning signs, approx. 423 x 423 mm

Stanje: novo, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 12.000 kg, dovoljena osna obremenitev (os 2): 12.000 kg, dovoljena osna obremenitev (os 3): 12.000 kg, skupna dolžina: 9.300 mm, skupna širina: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70 R17.5, medosna razdalja: 1.360 mm, barva: modra, Leto izdelave: 2023, Oprema: dvižna zadnja plošča, Farbe: Blau Nutzlast: 54.465 kg Hauptmerkmale: Hersteller: Faymonville Modell: MAX 110-Z-4AA-9.30-U Fahrgestellnummer: YAMT14XX4N0107629 Baujahr: Neu und unbenutzt Gedpfeuu Hcfjx Akqsbr Gewichte/Nutzlasten: Sattellast: 23.000 kg Achslast: 12.000 kg Gesamte Achslast: 48.000 kg Zulässiges Gesamtgewicht (zGG): 71.000 kg Leergewicht: 16.535 kg Zuladung: 54.465 kg Achsen: Achsenhersteller: BPW Hydraulische Lenkung Luftfederung mit Hub-/Senkventil WABCO-Bremssystem Bereifung: 245/70 R17.5 – Michelin (Tragfähigkeitsindex 146/146 F) 1. Achse liftbar Abmessungen: Ladeflächenlänge: 9.300 mm Verlängerungen: 6.500 + 6.800 mm Ladeflächenbreite: 2.540 mm Ladehöhe: 900 mm Zusätzliche Informationen: Doppelt teleskopierbare Ladefläche Containerverriegelungen Ausschubträger in der Breite + Holzabstützungen für Breitenverbreiterung Zurringe Satz doppelt klappbarer Auffahrrampen Zentralfettung 1x Ersatzrad + Halterung JOST-Stützwinde 24 Volt Elektrik 2.0″ Königszapfen 1 verzinkte Stahl-Frontwand Elektrisch betriebene Hydraulikpumpe Manuelle Lenkung Twistlocks = Weitere Informationen = Allgemeine Angaben Baujahr: 2023 Achskonfiguration Reifenmaß: 245/70 R17.5 Federung: Luftfederung Hinterachse 1: Doppelbereift; Liftachse; max. Achslast: 12.000 kg; gelenkt; Achsenmarke: BPW; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Hinterachse 2: Doppelbereift; max. Achslast: 12.000 kg; gelenkt; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Hinterachse 3: Doppelbereift; max. Achslast: 12.000 kg; gelenkt; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Hinterachse 4: Doppelbereift; max. Achslast: 12.000 kg; gelenkt; Reifenprofil links innen: 100%; links außen: 100%; rechts innen: 100%; rechts außen: 100% Gewichte: Leergewicht: 16.535 kg Zuladung: 54.465 kg zGG: 71.000 kg Funktionalität: Ladeflächenhöhe: 900 mm Ausziehbarer Aufbau: Ja Zustand: Allgemeinzustand: sehr gut Technischer Zustand: sehr gut Optischer Zustand: sehr gut Finanzielle Informationen Preis: auf Anfrage

Stanje: novo, največja dovoljena obremenitev: 36.156 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX200-N-3A-13.60-19.5-2.54 Technical Data Speed: 80 km/h Gross vehicle weight: 45,000 kg Fifth wheel load: 18,000 kg Axle load: 27,000 kg Unladen weight (+/- 3%): 8,844 kg Payload approx.: 36,156 kg Loading platform length: 13,600 mm Loaded saddle height: 950–1050 mm Rear steering radius: 2,300 mm Extendable by: 3,400 mm Axle spacing: 1,360/1,405 mm Overall width: 2,540 mm Technical Description Loading platform: Extendable loading platform with pneumatically operated locking. 2 pairs of lashing rings (LC 5,000 daN). 1 pair of lashing rings (LC 10,000 daN). 6 pairs of external foldable lashing rings (LC 5,000 daN). 2 pairs of external foldable lashing rings (LC 10,000 daN). Cut-outs in the outer frame of the loading platform for attaching tension belts, LC 2,000 daN. Landing legs: JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (test load 50 t). Axles: SAF axles: SAF CD air suspension axles with disc brakes (377 mm), featuring lifting/lowering function (ET 120). Trailing steering axles with electromagnetic reversing lock, activated via reverse gear or manually. Axle tools. (± 80 kg) Brake system: Brake system compliant with EU regulations, EBS-E (2S2M), without connecting lines to the tractor unit. Chassis: Chassis made from high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class and durable corrosion protection of the shot-blasted welded frame provided by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single colour in RAL shade of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Electrical equipment: Electrical system in accordance with EU regulations. LED lighting, 24V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S, & 15-pin. Connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included accessories: At the galvanized front connection bar, yellow-red air couplings. 2 wheel chocks with holder. 2" kingpin. Galvanized steel front wall approx. 2,200 mm high (± 105 kg) EN12642-XL. Gsdpfjg Sk Tvox Akqsbr Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer. European reflector plates (red-yellow) on the rear of the trailer. Loading platform with approx. 38 mm thick hardwood floor (± 320 kg). 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform (± 30 kg). 1 spare wheel holder under the loading platform, right side in direction of travel. Tyres 435/50 R 19.5 as selected by manufacturer. One mudflap at the rear of the trailer. Manual and documentation on USB stick. Mounting bracket for revolving warning beacon at the rear of the trailer. On the gooseneck and rear panel left and right, each with a bracket for warning plates with socket. One INOX toolbox, cross-mounted under the loading platform (1,000 x 400 x 2,500 mm) (± 135 kg). 6 pairs of WADER container locks in the loading platform for 1x20’ container, 2x20’ containers or 1x40’ container; an additional locking position is provided in the extension for a 45’ container (± 90 kg). 4 pairs of WADER container locks (± 60 kg). 10 pairs of galvanized plug-in stakes, approx. 100 x 50 mm, 1,000 mm high (± 220 kg). 3 pairs of crosswise stake pocket strips mounted in the loading platform for 100 x 50 mm plug-in stakes (± 95 kg). Holder for 1,000 mm stakes (± 45 kg).

Stanje: novo, največja dovoljena obremenitev: 31.500 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, Oprema: ABS, Priekaba Wiese ar trijų ašių važiuokle, kėlimo stalu ir atverčiamu galu. Idealiai tinka šakinių krautuvų ir (arba) darbo platformų pervežimui. Techninės specifikacijos. Gbsdpfevw Hmtox Akqsr 3 x 10 t ašys Pakeliama ašis Valdoma ašis su „Smart Steering“ (vairavimas į priekį ir atgal) Išorinio rėmo važiuoklė su nuolydžiu Galinė konstrukcija, tinkama 18 t, pritaikyta 2- ir 3-ašių vilkikams Hidraulinis kėlimo stalas reguliuojamas 3 pozicijose Atverčiamas galas su hidrauliniais išstumiamais elementais, tinkamas naudoti kaip užvažiavimo rampos, pervažiavimo rampos arba kaip pakrovimo platforma (Bendro ilgio sumažinimas pakėlus galą vertikaliai) Nuotolinis valdymas rampoms ir kėlimo stalui Priekinė sienelė Grotelinis grindų paviršius Daug tvirtinimo taškų „SmartBoard“ sistema Centrinė tepimo sistema Plieninė konstrukcija, cinkuota ir nudažyta Galima įsigyti daugybę papildomų pasirinkimų, pvz.: - Gervė - Įrankių dėžė ant priekabos pakopos - Aliuminiai ratlankiai Daugiau informacijos pagal užklausą.

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, dolžina tovornega prostora: 16.200 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 960 mm, skupna dolžina: 16.200 mm, skupna širina: 2.750 mm, vzmetenje: hidravlika, velikost pnevmatike: 235 / 75 R17.5, barva: modra, Leto izdelave: 2009, General Information Year of manufacture: 2009 Chassis number: WSTZH8D90030493 Make: Goldhofer Model: STZ H8-82-80A Type: Trailer Weights King pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg Gross vehicle weight (GVW): 106,000 kg Unladen weight: 23,480 kg Payload: 82,520 kg Axles Axle make: BPW Suspension: Hydraulic suspension Braking system: WABCO with EBS ABS 1st axle: friction-steered 2nd axle: rigid Axles 3 to 8: hydraulic steering 1st & 2nd axles: liftable Tyres: 235 / 75 R17.5 Dimensions Overall length: 16,200 mm Extensions: 8,300 mm Max. extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-pin height: +/- 1,280 mm Additional Equipment Operated via truck hydraulics Hydraulically operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox integrated in the gooseneck 3.5” king pin Central greasing system Oversize load marker boards Radio remote control Condition Technical condition: Very good Visual condition: Very good Financial information Gbsdpswwkrlsfx Akqor Price: On request

Stanje: zelo dobro (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 10.000 kg, dovoljena osna obremenitev (os 2): 10.000 kg, dovoljena osna obremenitev (os 3): 10.000 kg, prva registracija: 06/2018, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.550 mm, skupna dolžina: 11.000 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 265/70/19.5, barva: modra, Leto izdelave: 2018, Oprema: ABS, = Dodatne opcije i oprema = - Podizna osovina - Vazdušno ogibljenje = Dodatne informacije = Konfiguracija osovina Kočnice: Bubanj kočnice Ogibljenje: Vazdušno ogibljenje Zadnja osovina 1: Dimenzija pneumatika: 265/70/19.5; Dupla montaža; Podizna osovina; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Zadnja osovina 2: Dimenzija pneumatika: 265/70/19.5; Dupla montaža; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Zadnja osovina 3: Dimenzija pneumatika: 165/70/19.5; Dupla montaža; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Težine Prazna težina: 12.000 kg Nosivost: 36.000 kg Ukupna dozvoljena masa: 48.000 kg Funkcionalnost Visina tovarne površine: 95 cm Stanje Tehničko stanje: vrlo dobro Vizuelno stanje: vrlo dobro EMTECH NISKONOSIVI PRIKOLICA SA 3 OSE SAF osovine TRIDEC upravljački sistem Vazdušno ogibljenje, upravljive osovine, 1 podizna osovina Gsdpjwifrdofx Akqsbr 10.000 kg po osovini Tehnički dozvoljena ukupna masa 48.000 kg Dimenzije pneumatika 265/70 R19.5 Dužina tovarne površine 700 cm Produživa za 515 cm Širina tovarne površine 255 cm Visina tovarne površine +/- 95 cm Ušice za kuke i otvori za stubove

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 02/2001, skupna dolžina: 13.350 mm, skupna širina: 2.550 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rdeča, Leto izdelave: 2001, Skupna dolžina: 1334 cm + 1950 cm. Dolžina tovorne površine: 915 cm + 1950 cm. Višina nakladalne platforme: 100 cm. = Dodatne informacije = Konfiguracija osi Dimenzija pnevmatik: 245/70R17.5 Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dvojne pnevmatike; krmilna; profil pnevmatike na levi strani, notranji del: 30%; profil pnevmatike na levi strani, zunanji del: 30%; profil pnevmatike na desni strani, notranji del: 30%; profil pnevmatike na desni strani, zunanji del: 30% Zadnja os 2: dvojne pnevmatike; krmilna; profil pnevmatike na levi strani, notranji del: 50%; profil pnevmatike na levi strani, zunanji del: 50%; profil pnevmatike na desni strani, notranji del: 50%; profil pnevmatike na desni strani, zunanji del: 50% Zadnja os 3: dvojne pnevmatike; krmilna; profil pnevmatike na levi strani, notranji del: 30%; profil pnevmatike na levi strani, zunanji del: 30%; profil pnevmatike na desni strani, notranji del: 30%; profil pnevmatike na desni strani, zunanji del: 30% Godeycf Htepfx Akqsbr Teže Lastna teža: 15.650 kg Nosilnost: 29.350 kg Največja dovoljena masa: 45.000 kg Identifikacija Številka modela: 3 ABSD-48/3 / 3 x RAZŠIRLJIVO / 3 = Podatki o podjetju = VSE CENE SO NETO ZA IZVOZ. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) Govorim rusko. Trudimo se po najboljših močeh, da bi zagotovili pravilne informacije, vendar iz objavljenega besedila ni mogoče izpeljati nobenih pravic.

Stanje: novo, lastna masa: 9.300 kg, največja dovoljena obremenitev: 30.100 kg, skupna masa: 39.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 8.600 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 860 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17.5, Oprema: ABS, Gooseneck: - Gooseneck with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) Gbedpfoyxc Eyox Akqer - 30 mm hardwood flooring Extendable loading platform: - Loading platform, extendable execution with rear bevel approx. 1,000 mm x 8° - 5 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the platform for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, over the axles with checker plate covering Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Axles and tyres: - BPW axles, hydro-mechanically forced steering - Technical axle load: 12,000 kg - Air suspension with raise/lower valve - Axle tool kit - TPMS tyre pressure monitoring system according to ECE R 141 - Tyres: 235/75 R17.5 3PMSF Accessories included: - 2" kingpin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection strip - 2 wheel chocks with holder on the front wall - One spare wheel with holder in front of the front wall - Electro-hydraulic unit - Rear axle steering, operable from front and rear via cable remote control with push buttons, with axle single-track monitoring - European reflective warning plates (red-yellow) at the rear of the trailer - White reflective tape according to EU regulations on the sides and on the extension, red at the rear - Gooseneck and rear left and right brackets for warning signs, including socket - Sliding hook-in bar for ALU loading ramps at the rear of the vehicle - One bracket for a rotating beacon at the rear of the trailer - Galvanized folding supports under the rear bevel of the loading platform - One mudguard at the rear of the trailer - Operating manual and documentation on USB stick - Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection cover - Removable ALU side boards and tailgate on the gooseneck approx. 2,440 x 400 mm - The rear galvanized stanchions are removable (body length approx. 2,560 mm) - 3 pairs of WADER container pockets in the loading platform for 1x 20ft, 1x 30ft or 1x 40ft container - 6 pairs of stanchion pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - One INOX toolbox 1,500 x 390 x 810 mm under the loading platform, right side in direction of travel - Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm with a position light - On the warning signs a bracket for a rotating beacon - Radio remote control for rear axle steering, in addition to cable remote control, with indicator lights on receiver for single-track monitoring - On the checker plate surfaces on the gooseneck and loading platform, a painted sand layer as anti-slip protection - Speed sticker 80 km/h at the rear and on both sides - Axle load gauge for determining axle loads, including load diagram

Stanje: rabljeno, prevoženi kilometri: 214.314 km, moč: 427 kW (580,56 KM), prva registracija: 09/2020, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, zavore: retarder, barva: srebrn, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2020, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, navigacijski sistem, parkirni grelec, * Scania S580 * V8 580 KM * Popolno zračno vzmetenje * Aluminijasta platišča * Retarder * Letnik 2020 * Kilometri 214314 * Stacionarna klima * Stacionarno gretje * Avtomatska klima Gedpfxsy Rbxis Akqobr * Najvišja oprema * Vozilo je v zelo dobrem stanju * Vozilo je še vedno v uporabi * YS2S4X200055978 * Delovni čas: pon-pet 07:30-12:00 13:00-18:00, sobota 07:30-17:00 * Tel/Whatsapp/Viber: Alexandar Ilic * Tel/Whatsapp/Viber angleško: Mladen Ilic

Stanje: novo, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.700 mm, širina tovornega prostora: 2.540 mm, višina nakladalnega prostora: 890 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R 17.5, barva: siv, Oprema: ABS, Gooseneck: - Gooseneck in SNT design for optimizing loading area length, approx. 3,700 mm long, with rear tapering of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Loading platform: - Loading platform, approx. 9,700 mm long, with hydraulically foldable and lowerable rear section as well as hydraulically liftable front section for driving onto the gooseneck Gsdsyw Sakepfx Akqjbr Axles and tyres: - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle self-steering - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually - Technical axle load: 12,000 kg - Air suspension with lift/lower valve - 235/75 R 17.5 3PMSF twin tyres - TPMS tyre pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electrohydraulic auxiliary steering for the self-steering axle of a 3-axle unit - Automatic control of the self-steering axle when reversing via gyroscope sensor - Manual steering operation in forward and reverse using separate radio remote control - Manual operation enabled up to 10 km/h - System powered by separate electro-hydraulic unit Accessories included: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power pack - External beams on gooseneck with mounting holes for bolted lashing rings - First mounting hole approx. 200 mm from front, then approx. every 400 mm - One mounting hole at upper rear of external gooseneck beams for a bolted lashing ring - Grating cover with 5 mm sheet reinforcement on gooseneck and rear taper - 2" king pin - Guide plate on gooseneck for fifth wheel plate, approx. 500 mm wide - Round NATO socket at front connection bar (Maeler & Kaege VG 96 917) - 1 pair of removable side aluminium drop sides on gooseneck, approx. 400 mm high, anodized - 4 wheel chocks - Electric winch, approx. 5,400 kg pulling force, with radio remote control - Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller - Winch installed at the front inside the gooseneck - Continuous grating cover with 5 mm steel underlay for additional reinforcement, designed for point loads: - on the lift bed - on the loading platform - on the hydraulically lowerable rear section - Painted-on sand coating on the gooseneck covering plates and in transition areas between neck and lift bed, between lift bed and loading platform, and between loading platform and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, load capacity while driving in raised position: 9,000 kg - Hydraulic cylinders are fitted with load-holding valves - Cut-outs in the outer frame of the loading platform and lift bed for attaching tension straps - Extensive lashing positions - Hydraulically lowerable rear section for loading and unloading, can be raised to shorten total coupling length - Load capacity while driving in horizontal position: 10,000 kg - Shortening of total coupling length when raised: 2,350 mm - Painted-on sand coating on the complete ramp, except for the extendable galvanized part of the ramp - Hydraulically extendable rear extensions for loading and unloading - Radio remote control: - Control of hydraulic lift bed - Control of hydraulic lifting of rear extension - Control of hydraulic extension of rear extension - 1st axle with starting aid - Centralized lubrication system with 1 pump - 4 warning signs, approx. 423 x 423 mm, extendable