Müller-Mitteltal Kwh Prikolice nakup rabljenega (264)

Stanje: novo, največja dovoljena obremenitev: 10.400 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange-Type Towing Eye: Godpfx Aetr St Usfzoil * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Chassis: * Main frame made of fine-grain steel ----Tipper Platform: * Mesh hooks on sides and rear located at the central locking mounts, plus 2 on the front wall * Steel pallet two-way tipping body, front wall fixed, made of smooth plate; continuous collapsible sidewalls (without center posts), with drop side spring lifters and manual central locking for tilting * Rear stanchions bolted * Steel rear wall slid in front of the ramps * Each corner with 1 x 5 t lashing point; 4 x 3 t lashing rings recessed into the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-piece mechanical grating drive-up ramps with aluminium tip section 2,150 + 1,300 mm x 600 mm (can be slid together manually up to 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical stabilizer legs, and ramps hot-dip galvanized * Axles, springs, air tanks, towing eye, and landing gear painted in black * Sidewalls and platform in RAL 9010 pure white * Paint finish of sidewalls and tipper platform available in RAL color of choice at extra charge ----Information: * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Available from calendar week 07/2026

Stanje: rabljeno, lastna masa: 8.850 kg, največja dovoljena obremenitev: 31.150 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2019, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Skupna dolžina tovorne površine pribl. 9.500 mm, dolžina tovorne površine nizkega ležišča pribl. 7.360 mm, višina nakladanja pribl. 910 mm, 14 parov pritrdilnih obročev, vozilo se prodaja po naročilu stranke. Pridržujemo si pravico do tiskarskih napak, sprememb in napak, slike so vzorčne. Več podatkov na zahtevo! Gedpfxox Hpyaj Afzjil

Stanje: rabljeno, največja dovoljena obremenitev: 14.710 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, prva registracija: 10/2019, skupna širina: 2.550 mm, skupna višina: 1.250 mm, Oprema: ABS, Za vprašanja v zvezi z vozilom vam je z veseljem na voljo gospod Seidel (na tel.). ----Müller-Mitteltal RA-T 18,0 podvozje za kontejnerje ----* Dodatni žarometi zadaj vozila * 40 mm vlečno uho * Duomatic * BPW osi Gjdpfx Aoxw Iuuofzoil * Wabco ABS * Kolutne zavore * Zračne vzmeti za parkirno zavoro * Profil pnevmatik 1. os: 8-12 mm, 2. os: 7-11 mm * Dovoljena skupna masa: 18.000 kg * Lastna masa: 3.290 kg * Nosilnost: 14.710 kg Na željo vam pripravimo ponudbo za leasing ali financiranje. Gospod Seidel (tel.) vam je z veseljem na voljo. Več informacij najdete na naši spletni strani. !!! Pridržujemo si pravico do napak, sprememb in vmesne prodaje !!!

Stanje: rabljeno, lastna masa: 8.490 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2022, dolžina tovornega prostora: 9.650 mm, vzmetenje: zrak, velikost pnevmatike: 235/75 R17,5, Oprema: ABS, EBS Giedpfxsx Nn R As Afzol Bobnasta zavora Barva RAL 7046 tele siva Bobnasta zavora Širina tovornega prostora 2.550 mm / 3.000 mm Lastna teža 8.490 kg Gigant osi Hidravlične rampe + pomik Smartbord Dvigalo in spuščalo za sprednjo + zadnjo os Izrez za žlico bagra Pridržujemo si pravico do napak

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 04/2005, barva: črn, Leto izdelave: 2005, Oprema: ABS, Müller Mitteltal 2-Axle T5 2AL Low Loader with Ramps Gijdpfoxw T Uaox Afzol Air suspension BPW axles ABS ZSA Tyres 60% Tread 235R17.5 IDNR 665 We look forward to welcoming you for a consultation, contract signing, or vehicle pickup at our dealership. Please schedule an appointment in advance. If a visit to our dealership is not possible, we offer a complete transaction via phone, email, WhatsApp, or fax. Upon request, we can deliver your new vehicle directly to your door. This ensures you get the best price, maximum safety, and convenience when purchasing a vehicle. Trade-in We are happy to accept your used vehicle as a trade-in. We also offer digital vehicle appraisal based on your photos, without needing to visit the dealership. Our specialized purchasing team guarantees you the highest possible price. Upon request, we can deliver your new used vehicle nationwide right to your doorstep, and collect your trade-in at the same time. Financing – Leasing Immediate approval and settlement of outstanding loans. Your specialist partner for cars, vans, commercial vehicles, and construction machinery ITC GmbH & Co KG Siemensstraße 7 32312 Lübbecke (Industrial Area) Visit our website at Constantly over 400 vehicles in stock The information provided in advertisements, online, on price tags, and in images are non-binding descriptions and do not represent guaranteed characteristics. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment should be checked separately if necessary. The offer is generally without new TÜV approval, however, we are happy to provide an offer for this through our partner workshop. Subject to error and prior sale. = Further information = Empty weight: 8,900 kg Payload: 26,100 kg Gross vehicle weight: 35,000 kg Sales price: €19,000 / US$22,200

Stanje: rabljeno, največja dovoljena obremenitev: 29.850 kg, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/2012, naslednji pregled (TÜV): 01/2028, Leto izdelave: 2012, Interna številka vozila: G300402 Nemško vozilo Takoj na voljo na našem dvorišču v Kaufungen - Kassel, Nemčija Več INFO pri Luis Lucena Letnik 2012 Lastna masa priklopnika: 6.530 kg Priklopnik mešalec betona LIEBHERR 10 m³ Gijdpoxy Ul Sefx Afzjl Možne so napake. Z veseljem vzamemo vaše rabljeno vozilo v račun. Financiranje možno neposredno pri nas. GOLEC NUTZFAHRZEUGE GMBH Govorimo: nemško, angleško, špansko, poljsko, ukrajinsko, rusko, bolgarsko.

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1 design: suitable for roll-off containers and use as a lowbed trailer * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes Giodpfxsl Tq Nmo Afzel * 2 x 10 ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment facility * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design, right-hand side * Reflective contour marking tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear collision protection buffer * Foldable A-board at the rear * LED tail lights * 15-pin power connector * Main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with recesses for rollers in the bogie area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point container locking system and mechanical locking angles front in the guide track, cargo securing certificate according to DIN 30722-1 * Lashing package including: 1 pair of 10 t UVV lashing rings at the front bulkhead support, 3 pairs of 10 t UVV lashing rings laterally in the outer frame, 4 x 2 t cloverleaf-style lashing eyes on each side, 4 x 8 t lashing brackets recessed in the outer frame * Welded bead as anti-slip surface in the running area of the ramp * Mechanical drop-down supports at the rear * 1 pair of aluminium loading ramps (10.6 t/pair) measuring 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking parts, rear supports hot-dip galvanized * However, the drawbar, axles, and air tanks painted in black * New vehicle without initial registration, full manufacturer warranty * Subject to errors and prior sale * Available from calendar week 12/2026

Stanje: rabljeno, lastna masa: 7.340 kg, največja dovoljena obremenitev: 22.660 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, dolžina tovornega prostora: 9.200 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75 R 17,5, velikost zadnje pnevmatike: 235/75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, Dolžina nakladalne površine cca 9.200 mm, nakladalna višina cca 900 mm, 16 pritrdilnih obročev, vozilo se prodaja po naročilu, pridržujemo si pravico do tiskarskih napak, napak in sprememb, slike so vzorčne. Več podatkov na: !, More Details: ! Gsdjx Hpu Rspfx Afzjil

Stanje: rabljeno, lastna masa: 3.100 kg, največja dovoljena obremenitev: 7.400 kg, skupna masa: 10.500 kg, konfiguracija osi: 2 osi, prva registracija: 03/2006, naslednji pregled (TÜV): 03/2026, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.460 mm, višina nakladalnega prostora: 400 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: oranžna, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: v prihodu / v tranzitu, 2 osi, BPW osi, tandem, listnato vzmetenje, ABS (protiblokirni sistem), pritrdilne zanke, mehanske rampe, sprednja opora, zadnja opora, škatla za shranjevanje, višinsko nastavljiva vlečna ojnica.\nNadgradnja: Tandem nizkopodni priklopnik z mehanskimi vstopnimi rampami, 2x BPW osi, bobnaste zavore, vrtljivo vlečno uho 40 in 50 mm, višinsko nastavljiva ojnica!\nVišina nakladanja cca 930 mm!\nDolžina ramp cca 2600 mm!\nVse informacije brez garancije, saj je vozilo v prihodu! PODATKI O DODATNI OPREMI SO BREZ GARANCIJE, pridržujemo si pravico do sprememb, vmesne prodaje in napak! Gjdpfx Aox Rdqhefzjil

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 06/2019, skupna dolžina: 10.800 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, velikost pnevmatike: 235/75R17.5, medosna razdalja: 6.460 mm, Leto izdelave: 2019, Low-bed semi-trailer for sale. Brand: Müller Mitteltal. Gijdex Swl Uspfx Afzel Model: T 2 Profi 20.0. Year of manufacture: 2019. 2 axles. Gross vehicle weight: 20,000 kg. Unladen weight: approx. 5,140 kg. Wooden loading platform. Rear loading ramps. Extendable width boards. Fully galvanized chassis. Tyre size: 235/75 R17.5. Colour: orange. German vehicle documents. TÜV valid until 02-2026. Last inspection without defects. Orderly and complete semi-trailer. Good condition. Immediately ready for machinery and equipment transport. = Further information = Axle configuration Tyre size: 235/75R17.5 Axle brand: BPW Front axle: twin tyres; max. axle load: 10 t; tyre tread depth left inner: 80%; tyre tread depth left outer: 80%; tyre tread depth right inner: 80%; tyre tread depth right outer: 80% Rear axle: twin tyres; max. axle load: 10 t; tyre tread depth left inner: 80%; tyre tread depth left outer: 80%; tyre tread depth right inner: 80%; tyre tread depth right outer: 80% Weights gross vehicle weight: 20,000 kg Functionality Loading platform height: 92 cm Condition Technical condition: very good Visual condition: very good Damages: none Further information Please contact Gerrit Haverhoek for further information.

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1 design: Suitable for both roll-off containers and as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10-ton axles Giedol Tpc Aepfx Afzel * Air suspension with manual lowering function at the rear * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height coupling * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design, mounted right side * Reflective contour tape, side and rear * Side underride protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection buffer * Foldable "A"-sign at the rear * LED rear lights * 15-pin power connector * Main frame with raised outer rails for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic four-point locking system and mechanically insertable front stops in the track; cargo securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair 10-ton UVV lashing rings at front bulkhead carrier and 3 pairs 10-ton UVV lashing rings fitted on side outer frame; each side features 4 x 2-ton cloverleaf lashing points and 4 x 8-ton flush-fitted lashing brackets in outer frame * Continuous weld bead as anti-slip surface in the ramp running area * Mechanical drop-down rear supports * 1 pair aluminum loading ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Chassis, bogie, locking elements, rear drop-down supports hot-dip galvanized * Drawbar, axles, air tanks painted in black * New vehicle without initial registration, full manufacturer’s warranty * Subject to prior sale and errors excepted * Available from calendar week 12 / 2026

Stanje: rabljeno, lastna masa: 5.750 kg, največja dovoljena obremenitev: 24.250 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/1993, vzmetenje: jeklo, velikost pnevmatike: 235/75R17,5 141/140J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235/75R17,5 141/140J, velikost zadnje pnevmatike: 235/75R17,5 141/140J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, -- Pridržujemo si pravico do tiskarskih napak, napak in sprememb, vzorčne slike --, Več podatkov na: !, Več podrobnosti: ! Gijdpfx Afsx Hpuwozol

Stanje: novo, največja dovoljena obremenitev: 10.750 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: ----Braking System: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * 15-pin power connector * LED lighting ----General Fittings: * Support winch at the front Gjdjv D Tcbjpfx Afzjil * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Bolted smooth sheet metal bulkhead * Side panels made of trapezoidal profiled steel sheet, foldable, split once in the middle * Steel rear wall, can be inserted between the ramp holders when not in use, stored inside at the front wall * Bolted rear stakes ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2t lashing capacity every 480 mm * Option to fit 3t recessed lashing rings every 600 mm * 1 x 6.3t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2t lashing options ----Ramps: * One-piece mechanical grating access ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach slope approx. 860 mm on chassis ----Wheelbase: * Wheelbase 1,140 mm ----Painting: * Drawbar, bulkhead, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and support winch painted in a shade of black * Side panels painted in RAL 9010 pure white * Side panel painting in other RAL colors available at extra cost ----Information: * Reinforced and certified construction in accordance with EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf on the A7

Stanje: rabljeno, lastna masa: 6.500 kg, največja dovoljena obremenitev: 23.500 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2010, vzmetenje: jeklo, velikost pnevmatike: 235 / 75 R 17,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 235 / 75 R 17,5, velikost zadnje pnevmatike: 235 / 75 R 17,5, voznikova kabina: drugo, emisijski razred: noben, gorivo: biodizel, Oprema: ABS, zavorni sistem na stisnjen zrak, Vehicle is being sold on behalf of the customer. Some wooden planks are damaged. Equipped with 17 pairs of lashing rings. Loading height approx. 900 mm. -- Subject to typographical errors, mistakes, and modifications. Sample images used. More data available at: !, More Details: ! Gijdpjx Hpu Dsfx Afzel

Stanje: novo, največja dovoljena obremenitev: 8.620 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9: ----Braking system: * Electronic braking system (EBS) * Emergency release device for spring-type actuators * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Hot-dip galvanized drawbar with 40 mm flange eye, height-adjustable by 300 mm Gjdpfx Asm Angvjfzjil ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ----General Attachments: * Jost mechanical landing leg at the front * 2 mechanical hot-dip galvanized fold-down supports at the rear * Galvanized steel toolbox, right side * Hot-dip galvanized bolted underrun protection * Plastic quarter mudguards ----Tipping body: * Mesh hooks at sides and rear in the central locking mounts and 3 pieces on the front wall * Hot-dip galvanized chassis * Steel platform – 3-way tipper body * Continuous side walls without center stanchions, foldable with drop-side spring lifter * Rear tailgate foldable and swinging via manual central locking * Bolt-on hot-dip galvanized rear stanchions * 4 mm steel floor plate * Prepared for later installation of drop-side extensions * 5.5-meter-long body ----Load securing: * 1 x 5 t lash ring in each corner * 4 x 3 t lashing eyes each side, recessed in the outer frame ----Ramps: * Rear guide rail for loading ramps * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading platform, integrated into the chassis, accessible from the rear ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing leg painted black * Body color: RAL 9010 pure white * Painting of side walls and tipping body in any RAL color available at extra cost ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Stanje: rabljeno, lastna masa: 3.680 kg, največja dovoljena obremenitev: 10.720 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, prva registracija: 11/2021, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, vzmetenje: jeklo, velikost pnevmatike: 385/55R19,5 156J, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/55R19,5 156J, velikost zadnje pnevmatike: 385/55R19,5 156J, voznikova kabina: drugo, emisijski razred: noben, Oprema: ABS, zavorni sistem na stisnjen zrak, KOT NOVO, široke pnevmatike, kiper ploščad CINKANA, 12 pritrdilnih obročev, stranske stene 600 mm, doplačilo za rampe 1.000 €, -- pridržujemo si pravico do tiskarskih napak, sprememb in napak, vzorčne slike --, Več podatkov na zahtevo! Gijdjx Hpuqopfx Afzjl

Stanje: novo, največja dovoljena obremenitev: 8.620 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.500 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Eye: * Hot-dip galvanized, height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange eye ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED rear lights ----General Attachments: * JOST mechanical landing gear at the front * 2 mechanical, hot-dip galvanized drop legs at the rear * Toolbox made from galvanized sheet steel on the right side * Hot-dip galvanized bolted underrun protection * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the sides and rear at the central locking mounts, plus 3 hooks on the front wall * Hot-dip galvanized chassis * Steel pallet – 3-way tipper body * Fold-down continuous side walls without center posts, with drop side spring-assist * Rear wall can fold down or swing via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm steel floor plate * Preparation for retrofitting additional side wall extensions * Bridge length: 5.5 meters ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t lashing points recessed in the outer frame on each side ----Ramps: * Rear mounting track for loading ramps * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under cargo area at the rear of the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Painting: * Axles, springs, air tanks, drawbar, and landing gear painted in black * Tipping body color: RAL 9010 pure white * Painting of side walls and tipping platform in any RAL color available for an additional charge ----Information: Giodpfx Afel Thx Eezol * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle, no initial registration, with manufacturer’s warranty * Subject to prior sale and errors excepted ----Delivery time: * Available immediately ex Egestorf, A7

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release mechanism for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm via offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood flooring, clamped version * Preparation in front of the bulkhead for subsequent installation of container locks * Bolted front bulkhead made of smooth sheet metal Giodpfx Aemi Tmajfzsl * Split side walls made of trapezoidal-profile steel sheet, foldable, with folding stanchion in the middle * Steel rear wall, insertable between the ramps; stowage fixture in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t drop lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV lashing ring, 2 x 8 t retractable UVV lashing rings per side in the outer frame, various holes in the front and rear crossmember for 1.2 t lashing options * One-piece slide-in ramps, 12 t per pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and loading ramps hot-dip galvanized * ---Axles, air tanks, flanged towing eye, and support winch painted in black--- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 14.400 kg, skupna masa: 19.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber rear lights * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor, clamped version * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made from smooth steel sheet * Split steel sidewalls - trapezoidal profile - foldable with central folding stake * Steel rear wall, slidable between ramps - interior mounting bracket for storage when not in use, in front of the bulkhead * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Possible to install 3 t folding lashing brackets every 600 mm * Load securing package: at each front and rear corner 1 x 10 t UVV-rated lashing ring, on each side 2 x 8 t UVV-rated retractable lashing rings in outer frame, various holes in front and rear crossmembers for 1.2 t lashing options * One-piece sliding ramps 12 t/pair, approx. 2,750 x 620 mm * Rear drive-on bevel approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and drive-on ramps hot-dip galvanized Giodpfemi Tcqsx Afzol * ---Axles, air reservoirs, flange towing eye, and landing gear painted black--- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear front * Rear external folding supports * Plastic toolbox front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Loading platform 5.37 m * 50 mm softwood flooring * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profile steel sheet, foldable with drop-side spring assist * Rear wall made of steel, can be slid in between ramp mounts, stored inside in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross-members for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Rear approach incline approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black * Drop-sides painted in RAL2011 deep orange * Painting of the side walls in any RAL colour available at extra cost Giedpfxel Th Nrs Afzjl ----Info: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle assemblies ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, approx. 300 mm * 40 mm flange drawbar eye ----General Attachments: * Jost mechanical landing gear, front * External, hot-dip galvanized folding supports, rear * Side underrun protection * Plastic quarter mudguards * Plastic toolbox, front right, mounted on front wall outside ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Platform: * 50 mm softwood floor * 20'' container locks mounted at front and rear * Bolted smooth steel front wall * Drop sides, steel, trapezoidal profile, drop-down with drop-side lifting springs * Hot-dip galvanized, bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing brackets every 600 mm (5 lashing rings fitted each side) * 1 x 6.3 t lashing ring fitted in each corner front and rear * Various holes in front and rear transverse beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear storage compartment integrated in the chassis below the loading area ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, and rear wall * Drop side color in RAL 9010 pure white * Side panels can be painted in a RAL color at extra cost Giedpfsl Thy Rjx Afzol ----Info: * New vehicle without registration * Subject to prior sale and errors excepted ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.800 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.370 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox, front right outside on the front wall * Side underrun protection Gjdol Th Ncspfx Afzoil * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Platform length 5.37 m * 50 mm softwood floor * Bolted smooth sheet steel front wall * Fold-down side walls made of trapezoidal-profiled steel sheet with board lifting spring * Rear wall made of steel, insertable between the ramp holders for storage in front of the front wall when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame, approx. 45-degree bent, with 2 t lashing capacity every 480 mm * Installation of 3 t recessed lashing rings every 600 mm possible * In each corner front and rear, 1 x 6.3 t lashing ring * Various holes in front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grating loading ramps with spring system for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, front wall, tailgate, folding supports, loading ramps galvanized * Axles, springs, air tanks, 40 mm flange towing eye painted in black * Board walls painted in RAL2011 deep orange * Side panels available in other RAL colors at extra cost ----Information: * New vehicle with manufacturer warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.870 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 11.9: ----Braking System: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle units ----Suspension: * Parabolic springs with balancing unit ----Drawbar / Flange Eye: * Drawbar height adjustable by approx. 300 mm * 40 mm flange towing eye ----General Attachments: * Jost mechanical landing gear at front * Bolt-on, hot-dip galvanized folding supports at rear (external) * Side underrun protection * Plastic quarter mudguards * Plastic toolbox on front right, externally mounted on front wall ----Electrics / Lighting: * Tyre pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Load Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted bulkhead made of smooth steel sheet * Drop sides made of trapezoidal-profile steel sheet, foldable with sideboard spring lifter * Hot-dip galvanized bolted rear stanchions ----Load Securing: * Perforated outer rail, edged at approx. 45°, with lashing capacity of 2 t every 480 mm * Optional 3 t folding lashing brackets every 600 mm (five lashing rings mounted per side) * One 6.3 t lashing ring in each corner, front and rear * Various bores in front and rear crossmembers for 1.2 t lashing points ----Ramps: * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment recessed into the chassis frame under the loading area ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * Sideboard colour in RAL 9010 pure white * Painting of side walls in a RAL colour of choice available at extra charge ----Information: Gsdpol Tilxjfx Afzoil * New vehicle, not registered * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes Gisdpfx Afopk D D Uozjl ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7

Stanje: novo, največja dovoljena obremenitev: 8.780 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 500 mm, Leto izdelave: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: Godpfx Ajpk D Dmsfzjil * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear (front) * Two rear mechanical hot-dip galvanized fold-down supports * Tool box made of galvanized steel sheet, mounted right side * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin electrical connector * Bolted underride guard with LED tail lights ----Tipping Platform: * Net hooks on the sides and rear in the central locking mounts as well as 3 external on the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body, fully galvanized * Continuous, drop-side walls with spring-assisted board wall lifters, can be folded down—no center stanchions * Tailgate foldable and pendulum-mounted via manual central locking * Hot-dip galvanized bolted rear stanchion ----Load Securing: * 1 recessed and foldable 5 t lashing ring in each corner, as well as 4 recessed and foldable 3 t lashing rings on each side in the outer frame * 4 mm steel sheet floor, rear mount rail for ramps ----Ramps: * 1 pair aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Tires: * 235/75 R 17.5 tires ----Paint Finish: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf on the A7