Müller-Mitteltal Eal Prikolice nakup rabljenega (246)

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: Bwedjxglibspfx Adnow * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted on the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Pre-installed fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal profile steel sheet, foldable with side wall spring lift * Steel rear wall slidable between the ramps—holder for storage when not in use located inside in front of the bulkhead * Screwed-on rear corner posts * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm; option to fit 3 t drop lashing rings every 600 mm. Each front and rear corner equipped with 1 x 6.3 t lashing ring; various boreholes in the front and rear crossmembers for 1.2 t lashing options * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness) * Rear ramp angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL, including cargo securing certificate-- * Side wall colour RAL 2011 deep orange * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 46 / 2025 * Sample images

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2001, skupna dolžina: 10.000 mm, skupna širina: 2.510 mm, vzmetenje: jeklo, Leto izdelave: 2001, Dodatne informacije: Znamka: MÜLLER MITTELTAL Bodpfxjuwvbqo Adneww Model: T 3 Zgradba: platforma ( platforma D=8400 / Š=2510 / V=940 mm ) Leto: 09.2001 Vzmetenje: jeklo Zavore: bobnaste Dimenzije: D/Š: 10000 mm / 2510 mm Mase: polna/prazna: 24000 kg / 6100 kg = Več informacij = Vzmetenje: listnate vzmeti Lastna masa: 6.100 kg Nosilnost: 17.900 kg Dovoljena skupna masa: 24.000 kg Za dodatne informacije se obrnite na Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche ali Deniss Urmaker.

Stanje: rabljeno, največja dovoljena obremenitev: 8.750 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 06/2024, skupna širina: 2.550 mm, Leto izdelave: 2023, Müller Mitteltal KA-TA-R 11.9 Tandem 3-Way Tipper with many extras. Gross weight: 11,900 kg. Standard payload approx.: 8,750 kg. Internal dimensions: 5,000 x 2,420 x 500 mm. Tyres: 385/55R19.5. 4-coat single-color paint. Wheels: silver. Chassis/underrun protection: hot-dip galvanized. Platform with front wall: hot-dip galvanized. Axles/springs/air reservoir, etc.: black. Side and rear wall: RAL 2011 deep orange. Reinforced and certified superstructure according to EN 12642 XL including load securing certificate (only in combination with 500 mm high steel side walls). Rear stanchions bolted, hot-dip galvanized, without topcoat. Lashing points LC 5,000 daN, recessed at the front. Mesh hooks integrated laterally and at the rear into the locks of the central locking for the base side wall, as well as an additional 2 pieces on the front wall. BPW axles instead of GIANT. Tipping platform with fixed-mounted front wall in hot-dip galvanized version, with bolted, galvanized rear stanchions, without additional coating (not on HARDOX floor). Due to the system, waviness may occur during hot-dip galvanizing, especially on wide floor plates – warranty claims for this are excluded. Tyres 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940, ramp length 3,570 mm required). 1 piece plastic toolbox, black, lockable, W=750 x H=350 x D=300 mm (45 kg payload with evenly distributed load), mounted: on the chassis frame on the right in direction of travel. 1 pair of aluminium loading ramps without wheel channel (8 t/pair), 3,570 x 400 x 105 mm, suitable for rubber-tyred and tracked vehicles, 55 kg/piece. Two-step access in front of the front wall, left side in direction of travel (hot-dip galvanized). Connecting lines extended for agricultural and forestry towing vehicles. Further information Bedpsvy Tvtofx Adneww New: No

Stanje: rabljeno, največja dovoljena obremenitev: 29.500 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2011, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2011, Oprema: ABS, * Pnevmatike 235/75R17,5 Bedpfx Adjxccpkjnoww * Krmiljene osi * Hidravlične rampe zadaj * Rotacijska opozorilna luč zadaj * SAF osi * Bobnaste zavore * in še veliko več. * Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: novo, največja dovoljena obremenitev: 11.000 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-Way Tipping Trailer with Ramps – NEW VEHICLE * Immediately available in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 11563 Bwsdpfoxdp U Ajx Adnsw * Remote Diagnostics Unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator actuation * Brake system EBS 2S/2M * Gross weight: 14.4t, Payload approx. 11t * Galvanised floor * 5m x 2.42m x 0.5m + 0.5m steel side extensions (3-sided, swinging and foldable), painted, sidewalls laser welded * Lockable compartment under the tipping body for loading ramps * 1 pair of aluminium loading ramps 8t / pair, length 3.57m, included * Chassis hot-dip galvanised, front wall hot-dip galvanised * 4 UVV lashing rings LC 5000daN (front and rear) + 8 recessed, foldable lashing points LC 3000daN in the tipper bed (centrally positioned) * Excavator bucket rest made of hardwood * Two-step access ladder in front of the front wall (hot-dip galvanised) * Continuously height-adjustable drawbar, hot-dip galvanised, 40mm towing eye * Wide tires 385/55R 19.5 (4 tires), parabolic springs * Net hooks, rear stakes bolted on, hot-dip galvanised * Extension cables for the rear side wall * Plastic toolbox mounted on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer ---- * Hire purchase price example: * e.g. €579/month for 60 months without down payment, no final payment. Offer provided by our financing partner "FM LeasingPartner". Other terms with/without final payment or down payment available * Request an offer from us! * We are official Müller-Mitteltal dealers ----Our Opening Hours Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside opening hours, we are available by appointment We speak German, English, Polish, French WhatsApp / FaceTime

Stanje: rabljeno, lastna masa: 6.250 kg, največja dovoljena obremenitev: 23.750 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2008, dolžina tovornega prostora: 8.300 mm, širina tovornega prostora: 2.510 mm, višina nakladalnega prostora: 930 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75R17.5, barva: rdeča, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, turntable, leaf suspension, ABS (anti-lock braking system), extendable to 3m, lashing eyes, mechanical ramps, rear support, side aluminium underride protection, twin tyres, storage box. Bwedpfjwrtkgex Adnow Body: 3-axle low loader trailer with mechanical drive-on ramps, 3x 10t Gigant axles, drum brakes, extendable to 3m! Ramp length approx. 2,900 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: Bjdpfx Aoq Dyvvednsww * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Mechanism for Spring Brake Cylinders * LED Lighting * Drum Brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating aggregate * Height-adjustable drawbar by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost support winch at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood flooring * Preparation in front of the front wall for subsequent fitting of container locks * Bolted flat sheet front wall * Drop-side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring lifting device * Steel rear wall, can be inserted between the ramps – storage provided inside, in front of the front wall when not in use * Bolted rear stanchions * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing brackets every 600 mm possible; in the front and rear corners 1 x 6.3 t lashing ring each; various boreholes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation: approx. 2,750 x 600 mm (can be compacted down to 20 mm) * Rear approach slope approx. 860 mm * -- Reinforced and certified body according to EN 12642 XL, including load securing certificate -- * Drop-side painted in RAL 9010 pure white * Painting of side walls in any RAL color available at an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Stanje: rabljeno, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, prva registracija: 02/2021, naslednji pregled (TÜV): 08/2026, dolžina tovornega prostora: 4.800 mm, širina tovornega prostora: 2.430 mm, višina nakladalnega prostora: 500 mm, Oprema: ABS, Müller-Mitteltal nizkopodni kesonski priklopnik - Nizkopodni in dvosmerni kesonski priklopnik v enem vozilu - Vlečno uho 40 mm - Pnevmatski zavorni sistem - Podporna stojala za nakladanje in razkladanje - Gigant osi - Pnevmatske gume: 235/75 R 17,5 Bwjdpfxjxc Sv Ho Adnjw - Bobnaste zavore - Lastna teža: 3.620 kg - Nastavljiva višina drogov - TÜV veljaven do: 08.2026 - SP veljaven do: 02.2026 - SP veljaven do: - Dolžina tovornega prostora: 4.800 mm - Širina tovornega prostora: 2.430 mm - Višina stranic: 0,5 m Pridržujemo si pravico do napak in vmesne prodaje. Interna številka vozila: 11349.

Stanje: rabljeno, Leto izdelave: 2014, Različni zabojniki za Müller-Mitteltal CHK: - 5 kosov 4,5 – 5 m³, cena na kos 1.000,- € - 3 kosi 8 m³, cena na kos 2.000,- € - 3 kosi 5,7 m³ z dvokrilnimi zadnjimi vrati, cena na kos 2.000,- € Vsi zabojniki so v uporabljenem, delujočem stanju. Leto proizvodnje: 2014 – 2015. Bsdpexb N A Iofx Adnsww = Dodatne informacije = Država proizvodnje: DE Za dodatne informacije se obrnite na Jan-Marc Schwickerta.

Stanje: rabljeno, največja dovoljena obremenitev: 25.800 kg, skupna masa: 33.500 kg, konfiguracija osi: 2 osi, prva registracija: 07/2011, prostornina tovornega prostora: 10 m³, Leto izdelave: 2011, Oprema: ABS, Condition: very good, drum 75% Tyres: 70% Bjdpfeu Ear Aex Adneww

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2000, dolžina tovornega prostora: 10.790 mm, širina tovornega prostora: 2.500 mm, višina nakladalnega prostora: 950 mm, skupna dolžina: 14.790 mm, skupna širina: 2.500 mm, vzmetenje: jeklo, Leto izdelave: 2000, Dodatne informacije: Znamka: MÜLLER MITTELTAL Model: TS4 Bwodpfxsuwu Ezj Adnsw Zgradba: nizkopodni priklopnik (platforma D=10790 mm / Š=2500 mm / V=950 mm) Leto: 2000 Vzmetenje: jekleno Zavore: bobnaste Dimenzije: D/Š: 14790 mm / 2500 mm Mase: polna/prazna: 57.000 kg / 11.800 kg HIDRAVLIČNE RAMPE / JEKLENO VZMETENJE / BOBNASTE ZAVORE = Več informacij = Vzmetenje: listnato vzmetenje Lastna masa: 11.800 kg Nosilnost: 45.200 kg Dovoljena skupna masa: 57.000 kg Za več informacij kontaktirajte Andrei Somova, Marka Ševtšenka ali Denissa Urmakerja

Stanje: novo, največja dovoljena obremenitev: 8.770 kg, Leto izdelave: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with Many Extra Features Bsdpsxcxmfefx Adnsww Equipment: - 2 spring-assisted lifts for 400mm high steel side walls - Reinforced and certified superstructure according to EN 12642 XL load securing certificate - 10 UVV lashing hoops in the existing perforated pattern in the outer frame - Additional clamped wooden floor - 235/75R17.5 tyres - 4 BPW axles instead of GIGANT - Platform extension by 870 mm to a total of 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg load capacity Paintwork: - Wheels: silver - Chassis / front wall / drawbar / rear wall / stakes / ramps: hot-dip galvanized - Axles / springs: black - Side walls: RAL2011 deep orange We will be happy to offer you suitable financing, hire purchase, or leasing solutions. Delivery or shipping available by arrangement. We always have a selection of new equipment in stock and demo units available. Feel free to contact us! We rent vehicles with or without drivers, as well as machinery. A wide range of used machines and equipment always available. Subject to technical modifications, errors, and prior sale.

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System, TPMS) * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with equalizing unit * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing leg at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally front right on the front wall * Lateral underrun protection Bwodsxglh Rspfx Adnew * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Mounting facility in front of the headboard for retrofitting container locks * Bolted headboard made of smooth plate * Side walls made of trapezoidal-profiled steel sheet, fold-down with tailgate lifting assist * Steel rear wall, slidable between the ramps (holder for non-use mounted inside, in front of the front wall) * Rear stanchions bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm; installation of 3 t lashing rings every 600 mm possible; in each corner front and rear, 1 x 6.3 t lashing point; various bores in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating access ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (retractable to 20 mm wide) * Rear approach angle approx. 860 mm * --Reinforced and certified body structure to EN 12642 XL incl. load securing certificate-- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from KW 46 / 2025 * Sample pictures

Stanje: rabljeno, prva registracija: 11/2006, Leto izdelave: 2006, MÜLLER - MITTELTAL T4 Kompakt Vrtljiva prikolica - Nizkopodna prikolica z zračno vzmetenimi in jamskimi kolesi - 4 x zračno vzmetene GIGANT - osi - zračno vzmetenje - 4 x kolesne jame - mehanske nakladalne rampe - 2 zadnja podporna noga, zložljiva - izvlečne opozorilne table - ABS - MICHELIN pnevmatike: 235/75 R 17.5 - težka izvedba: 40.000 kg skupne mase - lastna teža: 8.400 kg - skupna dolžina: 11.750 mm - vlečna zanka: 50 mm Bedswmpbdjpfx Adnjww Posebej primerna za prevoz strojev za rezanje apna! - nemška prikolica - Tehnični pregled / tehnični preizkus možen na zahtevo in za doplačilo! Pridržujemo si pravico do napak in vmesne prodaje!

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Device for Spring Brake Cylinders * LED Lighting * Drum Brakes * 2 x 7 t Gigant Axles Bodporvvflofx Adneww * Parabolic Springs with Equalizing Device * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * External, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood flooring * Pre-installed fittings in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Sidewalls made of trapezoidal profiled steel, foldable, with drop-side spring assist * Steel rear wall, can be slid between the ramps—holder for storage provided inside at the front wall when not in use * Screwed-in corner posts at the rear * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings possible every 600 mm; in the corners front and rear each 1 x 6.3 t lashing ring; several holes for 1.2 t lashing options in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate-- * Drop-side color in RAL 9010 pure white * Painting of sidewalls in any RAL color available at an extra charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1 design: suitable for hooklift containers and use as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system Bwodpfx Ael Tq Nmednsw * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes * 2 x 10-tonne axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm eye and height adjustment device * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm, plus a side-mounted spare wheel holder (basket design, right side) * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper guards * Foldable 'A' sign at the rear * LED tail lights * 15-pin power connector * Main frame with raised outer rails to guide roll-off containers * Steel floor plates with roller recesses in the bogie area * Container length adjustable from 5,500 to 7,000 mm * Pneumatic 4-point container clamp locking and mechanical, insertable end stops at the front of the track; load securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair of 10t UVV lashing rings at the front bulkhead, 3 pairs of 10t UVV lashing rings in the outer frame, 4 x 2t cloverleaf lashing eyes per side, and 4 x 8t recessed lashing shackles in the outer frame * Weld bead as an anti-slip coating in the approach ramp area * Mechanical drop-down support legs at the rear * 1 pair of aluminium drive-on ramps (10.6t/pair), dimensions: 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) * Chassis, bogie, locking components, and rear support legs hot-dip galvanized * Drawbar, axles, and air tanks painted in black * New vehicle without initial registration, with full manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 05/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 – suitable for roll-off containers and as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 ton axles * Air suspension with manual lowering function at the rear * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment Bjdpfx Adel Tpc Ajneww * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side * Reflective contour tape on the sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * Foldable A-board at the rear * LED tail lights * 15-pin electrical connector * Main frame with raised outer frame for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical insertable end stops at the front in the guide rail, load securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair of 10t UVV lashing rings at the front on the headboard carrier as well as 3 pairs of 10t UVV lashing rings on the sides in the outer frame, on each side 4 x 2t lashing eyes in cloverleaf design, as well as 4 x 8t lashing brackets recessed in the outer frame * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at the rear * 1 pair of aluminium loading ramps (10.6t / pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking parts, rear drop supports hot-dip galvanized * However, drawbar, axles, air tanks painted in black * New vehicle, unregistered, with full manufacturer’s warranty * Subject to prior sale and errors excepted * Available from calendar week 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Wabco EBS (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 external drop-down supports at the rear * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * Hot-dip galvanized chassis * 15-pin electrical connector * LED rear lights * Closed single plastic mudguards * Foldable A-board at the rear Bjdpjl Thyqsfx Adnoww * Plastic underrun protection buffers * Hot-dip galvanized underrun protection with integrated chain storage box, dimensions: W= 370 mm x D= 420 mm x H= 480 mm, front left & right * 2 repositionable skip stops for lateral centering of skips * Skip stops at the front can be inserted in 4 positions with oscillating stop * 2 x 5.3 t UVV lashing rings per side for attaching tie-down equipment * Axles, springs, air tanks and support winch painted in black * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available from calendar week 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Includes 2 ratchet tensioners permanently mounted on the outer frame with chain box * Both sides fitted with eye and quick-shortener, Y-special version, 6.3 t * Tension force with load securing certificate * Wabco EBS * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Jost landing gear at the front * 2 x external drop-down supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar Bjdpfxepk Dyxo Adnoww * Hot-dip galvanized chassis * 15-pin power connector * LED tail lights * Closed plastic single mudguards * Foldable A-board at the rear * Plastic impact protection buffers on the underrun guard * Hot-dip galvanized underrun protection with integrated chain stowage box, dimensions W=370 mm x D=420 mm x H=480 mm, front left & right * 2 re-positionable bin stops for lateral centering of bins * Front bin stops with pivoting stop, pluggable in 4 positions * Side-mounted, each with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks, and landing gear painted black * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available from week

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Wabco EBS (Elektronisches Bremssystem) * RDÜ Reifenkontrollsystem (Reifendrucküberwachung) Bjdpfxol Th Hze Adnjww * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensating unit * Jost landing gear at front, 2 external telescopic support legs at rear * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * Hot-dip galvanized chassis * 15-pin electrical connector * LED tail lights * Enclosed single plastic mudguards * Folding rear A-shield * Plastic underride protection buffers * Hot-dip galvanized underride guard with integrated chain storage box, dimensions: W = 370 mm x D = 420 mm x H = 480 mm, front left & right * 2 removable skip stops for lateral centering of containers * Front skip stops can be inserted in 4 positions, with pivoting feature * 2 x 5.3 ton UVV lashing rings on each side for attaching tie-downs * Axles, springs, air tanks, and landing gear painted in black * Errors and prior sale excepted * New vehicle with manufacturer’s warranty * Available from calendar week 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Height-adjustable towing bar, adjustable by 300 mm, with 40 mm flanged eye * Mechanical BPW landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis side * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear – controlled by reverse gear Bwsdpfx Adjxf Sk Nsnsw * Bolted underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made from fine-grain steel * Two-step access mounted front left at the headboard * Steel pallet tri-sided tipper body with reinforced 600 mm Strong side boards * Continuous side panels at the top with internal pipe reinforcement – without intermediate stanchions – foldable with drop side spring-assist * Bolt-on rear stanchions * Combination steel swing doors – asymmetrically split, openable up to 270°, lockable – not foldable – with additional pendulum frame for automatic rear opening during tipping process * Locking via galvanized rotary rod lock at the rear and central locking * Deactivation function for automatic rear function when tipping backwards with open swing doors * One 5 t lashing ring per corner and 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm steel floor plate made from S 420 MC 4 fine-grain steel * Rear ramp mount rail * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment for ramps recessed below loading platform in the chassis * Hot-dip galvanized chassis, drawbar, tipper body, headboard, underrun guard, rear stanchions, rear folding support, and access step * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks and landing gear painted in a shade of black * New vehicle including manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem balancing unit * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Mechanical BPW landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, front right side of chassis * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reverse lights at rear – activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in the central locking mechanism and two on the front wall * Chassis made of fine-grain steel * Two-step access in front of front wall, left side * Steel three-way tipper body with reinforced 600 mm strong side boards * Continuous upper side walls with internal pipe reinforcement – without intermediate stanchions – foldable with drop-side spring assist * Rear stanchions bolted * Combination steel rear wing doors – 2-leaf, asymmetrically divided, pivotable and lockable up to 270° – not foldable – with additional pivot frame for automatic rear wall opening during tipping operation * Locking via galvanized rotary bolt lock at rear and central locking * Deactivation function for automatic rear wall opening during reverse tipping with open wing door * Lashing rings in each corner (1 x 5 t) and 4 x 3 t lashing eyes recessed into the outer frame on each side * 4 mm floor plate made of S 420 MC fine-grain steel * Rear mounting rail for loading ramps * Body reinforced, with load securing certificate according to EN 12642 XL * 1 pair aluminum loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles, lockable storage compartment for ramps at rear under load platform, recessed in chassis * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchion, rear folding supports, and step galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available immediately ex Egestorf Bodpfxsxf Sk As Adneww

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, - Wabco EBS (electronic braking system) Bwjdsxf Skvspfx Adnjw - Emergency release device for spring brake cylinders - Drum brakes - 2 x 5.5 t BPW axles - Parabolic springs with tandem equalisation unit - Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) - Height-adjustable drawbar (300 mm) with 40 mm flange-eye - Mechanical BPW landing gear at the front - 2 mechanical folding supports at the rear - Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side, front, on the chassis - 15-pin power connector - LED lighting system 12/24 V - 2 LED reversing lights at the rear (activated via reverse gear) - Bolted underrun protection - Plastic quarter mudguards - Lashing hooks at each position of the central locking system and 2 on the front panel - Chassis made of fine-grained steel - Two-step access in front of the front panel, left-hand side - 3-way tipping body in steel pallet design with reinforced 600 mm "Strong" drop sides - Continuous side walls on top, with internal tube reinforcement (without centre stanchions), fold-down with sidewall spring assist - Rear stanchions bolted - Combined steel wing-door tailgate, 2-wing, asymmetrically split, 270° pivotable and lockable (not fold-down), plus additional pendulum frame for automatic tailgate opening during tipping - Locking via galvanized rotary bar lock at the rear and central locking - Deactivation function for automatic tailgate opening when reversing with open wing doors - 1 x 5 t lashing ring in each corner, 4 x 3 t lashing points embedded in the outer frame on each side - 4 mm floor plate made of S 420 MC 4 fine-grained steel - Recessed ramp rails at the rear - Reinforced body with load securing certificate according to EN 12642 XL - 1 pair of aluminium loading ramps approx. 3.310 x 400 x 105 mm (capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles; lockable storage compartment under the load area, recessed into the chassis at the rear - Chassis, drawbar, tipping platform, front panel, underrun protection, rear stanchion, rear folding supports and access steps hot-dip galvanized - Side panels and tailgate painted RAL 3003 ruby red - Axles, springs, air reservoirs and landing gear painted black - New vehicle with manufacturer’s warranty - Subject to prior sale and errors - Immediately available ex-stock Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5-ton BPW axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring system with display capability in the truck via EBS signal (no truck-side installation required) * Drawbar adjustable by 300 mm in height with 40 mm flange towing eye * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, fitted to the right side at the front of the chassis * 15-pin power plug * LED lighting system 12 / 24 V Bjdpfx Aexf Skpodnoww * 2 LED reversing lights at the rear (activated via reverse gear) * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at each central locking bearing and 2 units on the front wall * Chassis made of high-tensile fine-grained steel * Two-step access ladder in front of front wall on driver's side * 3-way tipping platform body for pallets, made of steel, with reinforced 600 mm strong side walls * Continuous upper side walls with internal tube reinforcement (no center stanchions), fold-down with side wall spring assist * Bolt-on rear stanchions * Combi steel wing doors at the rear, 2-leaf asymmetrically split, can swing 270° and be locked (not fold-down), with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking system * Deactivation function for automatic tailgate feature when rear tipping with open wing doors * 1 x 5-ton lashing point at each corner and 4 x 3-ton lashing rings recessed into the outer frame on each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with cargo securing certificate according to EN 12642 XL * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 tons per pair), suitable for rubber-tired and tracked vehicles, with a lockable storage compartment under the loading area, integrated into the chassis at the rear * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear foldable supports, and entry step hot-dip galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in black tone * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tire pressure monitoring with in-cab display via EBS signal, no installation required on truck side) * Electronic Braking System (EBS) * Emergency release device for spring actuators * Drum brakes * Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox front right, mounted externally on the front wall * Side underride guard Bwodpfx Adondpn Sensw * Plastic quarter mudguards * LED lighting system * 15-pin electrical connector * Hot-dip galvanized chassis, drawbar, front and rear walls * 50 mm softwood floor * Provision for retrofitting 20” container locks front and rear * Bolted front wall made from smooth sheet metal * Side walls made from trapezoidal-profile steel, folding, with tailboard spring lifter * Hot-dip galvanized, bolted rear stanchions * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm, optional installation of 3 t recessed lashing rings every 600 mm, front and rear corners each with 1x 6.3 t lashing point, various holes for 1.2 t lashing options in the front and rear crossmembers * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowage compartment at the rear integrated under the loading platform in the chassis * Vehicle hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and interim sale excepted * Immediately available ex Egestorf