Müller-Mitteltal Avtotransporter nakup rabljenega (237)

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lifting and lowering function as well as RtR valve * Traction aid for shunting purposes switched to the first axle via EBS (no installation required on the truck side) * Smart-Board mounted as an information tool on the trailer with pressure sensors for total axle load display * Last axle as self-steering axle with electro-pneumatic steering lock * Steering lock for self-steering axle can be activated from the driver's cab for shunting purposes via EBS (no installation required on the truck side) * 2nd king pin position 2 * Side underrun protection, landing gear at the front and swinging support legs at the rear of the chassis * 15-pin electrical connector * LED lighting 12/24 V * LED beacon (removable) at rear * 2 additional LED reversing lights * 7-pin socket at the rear for oversized load lighting * Side marker lights with indicator control Ksdpfx Agsq Euakoqodw * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * Mechanically adjustable warning plate packages at front and rear * Straight steel sheet mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Gooseneck platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated steel sheet, W=2,480 x H=500 x L=665 mm, with hinged lid * 400 mm drop-side aluminum boards on the sides of the gooseneck platform (RAL color of choice), foldable and removable * Rear wall inserted at 150 mm height * Rear slope on the gooseneck platform to the lowbed approx. 700 mm long with checker plate covering; hole strip at the end for hooking in aluminum drive-on ramps * Gooseneck platform with 50 mm clamped wooden planks and lowbed platform with 60 mm clamped wooden planks * Tear plate over the axles * 9x manual fold-out extensions up to 3 m total width, but not in rear slope (extending boards present with closed storage box fitted transverse to the direction of travel under the loading area) * 3 mounting shafts under the gooseneck platform for storage of optional aluminum ramps or wooden planks for wheel well covering * Pivoting arm as a carrier for connection lines from the truck to the trailer * Load securing package consisting of: gooseneck platform with perforated outer frame, 45° angled, hole pattern for lashing devices (2 t lashing capacity per lashing point with minimum spacing of 480 mm) * Each side with 3 x 13.4 t recessed lashing rings in the floor (1x on the gooseneck platform, 1x on longitudinal frame after camber, 1x over the center axle next to the longitudinal frame) * Each side with 3 x 13.4 t lashing rings on outer frame (1x start of gooseneck camber, 1x beginning of ramp, 1x end of ramp) * Each side with 2 x 10 t lashing rings (1x between front wheel well and first axle, 1x between second and third axle) * Each side with 3 x 5 t lashing rings bolted to the outer frames of the wheel wells (2 on the front, 1 on the rear wheel well) * Extended excavator boom trough from end of last rigid axle over steering axle to the end cross member, continuously with internal reinforcement profile approx. W=770 mm x Depth rear=270 mm / Depth front=170 mm, each side with 2 x 6.4 t lashing rings in the excavator boom trough * Each side with 2 wheel wells, 390 mm deep and 640 mm wide, for transporting wheel loaders with a

Stanje: rabljeno, največja dovoljena obremenitev: 29.500 kg, skupna masa: 38.000 kg, konfiguracija osi: 2 osi, prva registracija: 03/2011, naslednji pregled (TÜV): 07/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.700 mm, Leto izdelave: 2011, Oprema: ABS, * Pnevmatike 235/75R17,5 * Krmiljene osi * Hidravlične rampe zadaj * Rotacijska opozorilna luč zadaj * SAF osi Kjdpoxccpkofx Agqjdw * Bobnaste zavore * in še veliko več. * Pridržujemo si pravico do napak, sprememb in vmesne prodaje.

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 09/2001, skupna dolžina: 10.000 mm, skupna širina: 2.510 mm, vzmetenje: jeklo, Leto izdelave: 2001, Dodatne informacije: Znamka: MÜLLER MITTELTAL Model: T 3 Zgradba: platforma ( platforma D=8400 / Š=2510 / V=940 mm ) Leto: 09.2001 Vzmetenje: jeklo Zavore: bobnaste Dimenzije: D/Š: 10000 mm / 2510 mm Mase: polna/prazna: 24000 kg / 6100 kg = Več informacij = Vzmetenje: listnate vzmeti Lastna masa: 6.100 kg Nosilnost: 17.900 kg Kedpfx Agsuwvbqoqodw Dovoljena skupna masa: 24.000 kg Za dodatne informacije se obrnite na Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche ali Deniss Urmaker.

Stanje: novo, največja dovoljena obremenitev: 11.000 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 1.000 mm, Leto izdelave: 2025, Oprema: ABS, dvižna zadnja plošča, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-Way Tipping Trailer with Ramps – NEW VEHICLE * Immediately available in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Reference number for inquiries: 11563 * Remote Diagnostics Unit (RDÜ) with display option in the truck via EBS signal * Side marker lights with indicator actuation * Brake system EBS 2S/2M * Gross weight: 14.4t, Payload approx. 11t * Galvanised floor * 5m x 2.42m x 0.5m + 0.5m steel side extensions (3-sided, swinging and foldable), painted, sidewalls laser welded * Lockable compartment under the tipping body for loading ramps * 1 pair of aluminium loading ramps 8t / pair, length 3.57m, included * Chassis hot-dip galvanised, front wall hot-dip galvanised * 4 UVV lashing rings LC 5000daN (front and rear) + 8 recessed, foldable lashing points LC 3000daN in the tipper bed (centrally positioned) * Excavator bucket rest made of hardwood * Two-step access ladder in front of the front wall (hot-dip galvanised) * Continuously height-adjustable drawbar, hot-dip galvanised, 40mm towing eye * Wide tires 385/55R 19.5 (4 tires), parabolic springs * Net hooks, rear stakes bolted on, hot-dip galvanised * Extension cables for the rear side wall * Plastic toolbox mounted on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer ---- * Hire purchase price example: Kdedpfx Ajxdp U Aegqow * e.g. €579/month for 60 months without down payment, no final payment. Offer provided by our financing partner "FM LeasingPartner". Other terms with/without final payment or down payment available * Request an offer from us! * We are official Müller-Mitteltal dealers ----Our Opening Hours Monday – Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside opening hours, we are available by appointment We speak German, English, Polish, French WhatsApp / FaceTime

Stanje: rabljeno, Leto izdelave: 2014, Različni zabojniki za Müller-Mitteltal CHK: - 5 kosov 4,5 – 5 m³, cena na kos 1.000,- € - 3 kosi 8 m³, cena na kos 2.000,- € - 3 kosi 5,7 m³ z dvokrilnimi zadnjimi vrati, cena na kos 2.000,- € Vsi zabojniki so v uporabljenem, delujočem stanju. Leto proizvodnje: 2014 – 2015. = Dodatne informacije = Država proizvodnje: DE Za dodatne informacije se obrnite na Jan-Marc Schwickerta. Kdedpexb N A Isfx Agqew

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) Kdsdjl Thxdjpfx Agqsw * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning signs front and rear * Front closed plastic mudguards and rear straight galvanized steel skirts, each with splash protection * Reflective contour markings on the sides and rear * Hinged lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable revolving beacon at the rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle * 15-pin electrical connector * Four stake pockets per side (stakes not included) with additional lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant drop-down and swiveling lashing rings, loadable in all directions and recessed into the outer frame – load capacity in corners 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out outriggers for 3-meter total width (not in the rear taper) * Widening planks stored in the center of the loading area * Excavator arm trough above rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides in the excavator trough) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), laterally adjustable * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm drive-on slope) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --technically permissible total weight 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 38/2025

Stanje: novo, največja dovoljena obremenitev: 37.390 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Leto izdelave: 2025, * TS 3 RM ML 30.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW axles * Air suspension with lift and lower system, including RtR valve * Hill-hold assist for maneuvering, switchable to the first axle via EBS (no truck-side installation required) * SmartBoard as an infotool mounted on the trailer with pressure sensors for total axle load display * Last axle as trailing steering axle with electro-pneumatic steering lock * Lock for the trailing axle actuated from the cab for maneuvering purposes via EBS (no truck-side installation required) * Second king pin position 2 * Side underrun protection, landing legs at the front and swing-down support legs at the rear of the chassis * 15-pin electrical socket * LED lighting 12/24 V * Removable LED beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with display possibility in the truck via EBS signal (no truck-side installation required) * Mechanically adjustable warning panel kits at the front and rear * Straight steel mudguards * Spare wheel holder in front of the front wall crossmember (without spare wheel) * Fifth-wheel platform with 45° chamfered front corners and a front-mounted toolbox made of galvanized, powder-coated sheet steel, B = 2,480 x H = 500 x L = 665 mm, with hinged lid * On the side of the fifth-wheel platform, 400 mm aluminum drop and removable side walls (in RAL color of choice) * Rear wall – inserted to 150 mm height * Rear slope on the fifth-wheel platform to the lowbed approx. 700 mm long with checker plate covering, and a perforated strip at the end for attaching aluminum drive-on ramps Kodpfjtpta Djx Agqjdw * Fifth-wheel platform with 50 mm clamped wood planks, and low-bed platform with 60 mm clamped wood planks * Tear plate above the axles * 9 x mechanical folding extensions for an overall width of 3 meters, but not on the rear slope (extension boards available with transverse closed storage compartment beneath the loading area) * 3 storage compartments under the fifth-wheel platform for optional aluminum drive-on ramps or wooden planks for covering wheel recesses * Swivel arm as carrier for connection lines from the truck to the trailer * Load securing package includes: on the fifth-wheel platform, perforated outer frame with 45° angled profile, with hole pattern for lashing equipment (2 t lashing force per lashing point at a minimum spacing of 480 mm) * On each side, 3 x 13.4 t recessed lashing rings in the floor (1 on the fifth-wheel platform, 1 on the longitudinal beam after the gooseneck, and 1 over the middle axle next to the longitudinal beam) * On each side, 3 x 13.4 t lashing rings on the outer frame (1 at the start of the fifth-wheel platform gooseneck, 1 at the start of the ramp, 1 at the end of the ramp) * On each side, 2 x 10 t lashing rings (1 between the front wheel recess and first axle, 1 between the second and third axles) * On each side, 3 x 5 t lashing rings bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) * Extended excavator arm trough, continuously from the end of the last rigid axle over the steering axle up to the rear, with internal reinforcement profile approx. W = 770 mm, rear depth = 270 mm / front depth 170 mm, on each side 2 x 6.4 t lashing rings in the excavator arm trough * On each side, 2 wheel recesses, 390 m

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profile 30.0: * EBS brake system * RDÜ tire pressure monitoring * Emergency release system for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical rear axle equalization * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable front and rear warning sign packages * Front plastic mudguards (closed) and straight, galvanized steel rear mudflaps, each with splash protection * Reflective contour marking strips on the sides and rear * Hinged (hot-dip galvanized) lid for tool box located on the turntable platform * Multi-voltage electrical system * LED rear lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical plug * 4 stake pockets per side (stakes not included), each with simultaneous lashing facility * Load securing package comprising: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – corners rated to 13.4 t, otherwise 10 t. * 6 pairs of mechanical swing-out supports for 3 m overall width (not at rear slope) * Widening planks stored in the center of the loading area * Excavator arm rest over rear axle up to end buffer, approx. 2,100 mm long (2 pairs of 6.4 t lashing eyes at the side in the excavator arm rest) * Hydraulic one-piece drive-on ramps (approx. 3,000 x 720 mm), lateral adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar and drive-on ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Permissible gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized Kdedpol Thxasfx Agqsw * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from week 38/2025

Stanje: novo, največja dovoljena obremenitev: 5.840 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brakes * BPW axle * Parabolic springs Kdodpfx Agou I Iqxeqow * Support winch at the front * Spring-assisted square tube support legs at the rear with base plates and safety lock pins for various support heights * Drawbar with 40 mm bolt coupling (height-adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Enclosed steel fenders with splash guards * Closed side underrun protection, usable as advertising space * Plastic toolbox with base insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum assembly, clear width between the drum arms 1,700 mm, with tension lock for fixing the drum at the support arm ends, as well as a central claw lock for securing the cable drum assembly to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable drive rollers with rubber lining * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft, 76 mm in diameter, with centering and rotating ends * 1 pair of stepped centering cones made of polyamide * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 5.840 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * RDÜ Tire Pressure Monitoring * EBS Brake System * Drum Brakes * BPW Axle * Parabolic Springs * Front Support Winch * Rear Square Tube Support Legs with Spring Assistance, Base Plate, and Safety Locking Pins for Adjustable Support Heights * Drawbar with 40 mm Bolt-on Eye (height adjustable, __ mm) * 15-pin Electrical Connector * LED Lighting * Flashing LED Side Marker Lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed steel mudguards with splash protection * Enclosed lateral underrun protection usable as advertising space * Plastic toolbox with floor insert (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum carrier, clear width between drum arms 1,700 mm, with tension fastener for securing the drum to the carrier arms and a central pawl lock for securing the cable drum carrier to the chassis Kedpfx Agju I Iqloqedw * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft diameter 76 mm, with centering and rotating ends * 1 Pair of stepped Polyamide Centering Cones * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: Hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 5.840 kg, skupna masa: 8.800 kg, konfiguracija osi: 1 os, Leto izdelave: 2025, * KWH 8.8 ML: * TPMS (Tire Pressure Monitoring System) * EBS braking system * Drum brake * BPW axle * Parabolic springs * Front support winch * Rear spring-assisted square tube supports with base plate, safety locking pins for variable support heights * Drawbar with 40 mm bolt coupling (height-adjustable in mm) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members Ksdpfx Agou I Iq Esqjdw * Closed steel mudguards with splash protection * Closed lateral underrun protection, suitable for use as advertising space * Plastic toolbox with base insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum mount, light width between drum arms 1,700 mm - with tension lock for drum securing at the ends of the support arms and a center-mounted claw lock for securing the cable drum mount to the chassis * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of stepped polyamide centering cones * Hydraulic power unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Surface hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 23.830 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.460 mm, širina tovornega prostora: 2.520 mm, Leto izdelave: 2025, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles Kdodpfx Aol Th Adegqow * Parabolic suspension * Mechanical rear axle equalizer * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning sign panels front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Side and rear contour marking tape (reflective) * Flip-top lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), can also be used for lashing * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV folding and lowering lashing rings, loadable in all directions and recessed in the outer frame – corners rated at 13.4 t, otherwise 10 t * 6 pairs mechanical folding outriggers for 3 m overall width (not included on the rear slope) * Widening boards stored in the center of the load area * Excavator arm rest over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Hydraulically operated single-piece ramps (approx. 3,000 x 720 mm), laterally adjustable * Load area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (incl. 860 mm approach ramp) * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Technically possible gross vehicle weight: 30,000 kg -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 38/2025

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * TPMS (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, adjustable by approx. 300 mm Kedpfoxglibox Agqodw * Drawbar extension by 250 mm to a total of 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted on the front right exterior of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Pre-installed fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Drop-side walls made of trapezoidal profile steel sheet, foldable with side wall spring lift * Steel rear wall slidable between the ramps—holder for storage when not in use located inside in front of the bulkhead * Screwed-on rear corner posts * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm; option to fit 3 t drop lashing rings every 600 mm. Each front and rear corner equipped with 1 x 6.3 t lashing ring; various boreholes in the front and rear crossmembers for 1.2 t lashing options * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm thickness) * Rear ramp angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL, including cargo securing certificate-- * Side wall colour RAL 2011 deep orange * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 46 / 2025 * Sample images

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Mechanism for Spring Brake Cylinders * LED Lighting * Drum Brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating aggregate * Height-adjustable drawbar by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost support winch at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood flooring * Preparation in front of the front wall for subsequent fitting of container locks * Bolted flat sheet front wall * Drop-side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring lifting device * Steel rear wall, can be inserted between the ramps – storage provided inside, in front of the front wall when not in use * Bolted rear stanchions * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t folding lashing brackets every 600 mm possible; in the front and rear corners 1 x 6.3 t lashing ring each; various boreholes in the front and rear cross member for 1.2 t lashing options * One-piece mechanical grating loading ramps with spring mechanism for single-person operation: approx. 2,750 x 600 mm (can be compacted down to 20 mm) * Rear approach slope approx. 860 mm * -- Reinforced and certified body according to EN 12642 XL, including load securing certificate -- * Drop-side painted in RAL 9010 pure white * Painting of side walls in any RAL color available at an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale Kodpfxeq Dyvve Agqsdw * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System, TPMS) * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with equalizing unit * Drawbar height-adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing leg at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted externally front right on the front wall * Lateral underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Mounting facility in front of the headboard for retrofitting container locks Kjdjxglh Rjpfx Agqedw * Bolted headboard made of smooth plate * Side walls made of trapezoidal-profiled steel sheet, fold-down with tailgate lifting assist * Steel rear wall, slidable between the ramps (holder for non-use mounted inside, in front of the front wall) * Rear stanchions bolted * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm; installation of 3 t lashing rings every 600 mm possible; in each corner front and rear, 1 x 6.3 t lashing point; various bores in front and rear crossmember for 1.2 t lashing options * One-piece mechanical grating access ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (retractable to 20 mm wide) * Rear approach angle approx. 860 mm * --Reinforced and certified body structure to EN 12642 XL incl. load securing certificate-- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from KW 46 / 2025 * Sample pictures

Stanje: novo, največja dovoljena obremenitev: 10.900 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency Release Device for Spring Brake Cylinders * LED Lighting * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Springs with Equalizing Device * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm Kodpfx Aervvflsgqedw * Jost landing gear at the front * External, hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood flooring * Pre-installed fittings in front of the front wall for retrofitting container locks * Bolted smooth sheet metal front wall * Sidewalls made of trapezoidal profiled steel, foldable, with drop-side spring assist * Steel rear wall, can be slid between the ramps—holder for storage provided inside at the front wall when not in use * Screwed-in corner posts at the rear * Perforated outer frame, angled approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings possible every 600 mm; in the corners front and rear each 1 x 6.3 t lashing ring; several holes for 1.2 t lashing options in the front and rear cross members * One-piece mechanical grating loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified structure according to EN 12642 XL incl. load securing certificate-- * Drop-side color in RAL 9010 pure white * Painting of sidewalls in any RAL color available at an extra charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Immediately available from Egestorf

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2-in-1 design: suitable for hooklift containers and use as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release mechanism for spring-loaded brake cylinders * Drum brakes * 2 x 10-tonne axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm eye and height adjustment device * Tool box made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm, plus a side-mounted spare wheel holder (basket design, right side) * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper guards * Foldable 'A' sign at the rear * LED tail lights * 15-pin power connector * Main frame with raised outer rails to guide roll-off containers * Steel floor plates with roller recesses in the bogie area * Container length adjustable from 5,500 to 7,000 mm * Pneumatic 4-point container clamp locking and mechanical, insertable end stops at the front of the track; load securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair of 10t UVV lashing rings at the front bulkhead, 3 pairs of 10t UVV lashing rings in the outer frame, 4 x 2t cloverleaf lashing eyes per side, and 4 x 8t recessed lashing shackles in the outer frame * Weld bead as an anti-slip coating in the approach ramp area * Mechanical drop-down support legs at the rear * 1 pair of aluminium drive-on ramps (10.6t/pair), dimensions: 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable rear storage compartment) * Chassis, bogie, locking components, and rear support legs hot-dip galvanized Kjdpfx Aol Tq Nmjgqjdw * Drawbar, axles, and air tanks painted in black * New vehicle without initial registration, with full manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 05/2026

Stanje: novo, največja dovoljena obremenitev: 13.700 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.000 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2026, * TRA 18.0: * 2 in 1 – suitable for roll-off containers and as a low loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 ton axles * Air suspension with manual lowering function at the rear * Drawbar 2,000 mm long with 40 mm towing eye and height adjustment * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side * Reflective contour tape on the sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * Foldable A-board at the rear * LED tail lights * 15-pin electrical connector * Main frame with raised outer frame for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical insertable end stops at the front in the guide rail, load securing certificate according to DIN 30722-1 * Load securing package consisting of: 1 pair of 10t UVV lashing rings at the front on the headboard carrier as well as 3 pairs of 10t UVV lashing rings on the sides in the outer frame, on each side 4 x 2t lashing eyes in cloverleaf design, as well as 4 x 8t lashing brackets recessed in the outer frame * Weld bead as anti-slip surface in the ramp track area * Mechanical drop-down supports at the rear * 1 pair of aluminium loading ramps (10.6t / pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) Kodpfsl Tpc Aex Agqodw * Chassis, bogie, locking parts, rear drop supports hot-dip galvanized * However, drawbar, axles, air tanks painted in black * New vehicle, unregistered, with full manufacturer’s warranty * Subject to prior sale and errors excepted * Available from calendar week 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Wabco EBS (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Jost support winch at the front, 2 external drop-down supports at the rear * Height-adjustable, hot-dip galvanized drawbar +/- 150 mm * Hot-dip galvanized chassis * 15-pin electrical connector * LED rear lights * Closed single plastic mudguards * Foldable A-board at the rear * Plastic underrun protection buffers * Hot-dip galvanized underrun protection with integrated chain storage box, dimensions: W= 370 mm x D= 420 mm x H= 480 mm, front left & right * 2 repositionable skip stops for lateral centering of skips Kdsdsl Thyqepfx Agqjw * Skip stops at the front can be inserted in 4 positions with oscillating stop * 2 x 5.3 t UVV lashing rings per side for attaching tie-down equipment * Axles, springs, air tanks and support winch painted in black * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available from calendar week 05 / 2026

Stanje: novo, največja dovoljena obremenitev: 12.260 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, * TM-TA 14.4: * Includes 2 ratchet tensioners permanently mounted on the outer frame with chain box * Both sides fitted with eye and quick-shortener, Y-special version, 6.3 t * Tension force with load securing certificate * Wabco EBS * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Jost landing gear at the front * 2 x external drop-down supports at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power connector * LED tail lights * Closed plastic single mudguards * Foldable A-board at the rear * Plastic impact protection buffers on the underrun guard * Hot-dip galvanized underrun protection with integrated chain stowage box, dimensions W=370 mm x D=420 mm x H=480 mm, front left & right * 2 re-positionable bin stops for lateral centering of bins * Front bin stops with pivoting stop, pluggable in 4 positions Kodpspk Dyxjfx Agqsdw * Side-mounted, each with 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks, and landing gear painted black * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available from week

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring with display function in the truck via EBS signal – no truck-side installation required * Height-adjustable towing bar, adjustable by 300 mm, with 40 mm flanged eye * Mechanical BPW landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis side * 15-pin electrical connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear – controlled by reverse gear * Bolted underrun protection * Plastic quarter mudguards * Net hooks at each position of the central locking, plus 2 on the front wall * Chassis made from fine-grain steel * Two-step access mounted front left at the headboard * Steel pallet tri-sided tipper body with reinforced 600 mm Strong side boards * Continuous side panels at the top with internal pipe reinforcement – without intermediate stanchions – foldable with drop side spring-assist * Bolt-on rear stanchions * Combination steel swing doors – asymmetrically split, openable up to 270°, lockable – not foldable – with additional pendulum frame for automatic rear opening during tipping process Kedpexf Sk Nofx Agqodw * Locking via galvanized rotary rod lock at the rear and central locking * Deactivation function for automatic rear function when tipping backwards with open swing doors * One 5 t lashing ring per corner and 4 x 3 t lashing eyes recessed in the outer frame on each side * 4 mm steel floor plate made from S 420 MC 4 fine-grain steel * Rear ramp mount rail * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment for ramps recessed below loading platform in the chassis * Hot-dip galvanized chassis, drawbar, tipper body, headboard, underrun guard, rear stanchions, rear folding support, and access step * Side panels and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks and landing gear painted in a shade of black * New vehicle including manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem balancing unit * Tire pressure monitoring with display option in truck via EBS signal – no truck-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flanged towing eye * Mechanical BPW landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, front right side of chassis * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reverse lights at rear – activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in the central locking mechanism and two on the front wall * Chassis made of fine-grain steel * Two-step access in front of front wall, left side * Steel three-way tipper body with reinforced 600 mm strong side boards * Continuous upper side walls with internal pipe reinforcement – without intermediate stanchions – foldable with drop-side spring assist * Rear stanchions bolted * Combination steel rear wing doors – 2-leaf, asymmetrically divided, pivotable and lockable up to 270° – not foldable – with additional pivot frame for automatic rear wall opening during tipping operation * Locking via galvanized rotary bolt lock at rear and central locking * Deactivation function for automatic rear wall opening during reverse tipping with open wing door Kdedpfxoxf Sk Ae Agqew * Lashing rings in each corner (1 x 5 t) and 4 x 3 t lashing eyes recessed into the outer frame on each side * 4 mm floor plate made of S 420 MC fine-grain steel * Rear mounting rail for loading ramps * Body reinforced, with load securing certificate according to EN 12642 XL * 1 pair aluminum loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles, lockable storage compartment for ramps at rear under load platform, recessed in chassis * Chassis, drawbar, tipper body, front wall, underrun protection, rear stanchion, rear folding supports, and step galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, - Wabco EBS (electronic braking system) - Emergency release device for spring brake cylinders - Drum brakes - 2 x 5.5 t BPW axles - Parabolic springs with tandem equalisation unit - Tire pressure monitoring system with display option in the truck via EBS signal (no truck-side installation required) - Height-adjustable drawbar (300 mm) with 40 mm flange-eye - Mechanical BPW landing gear at the front - 2 mechanical folding supports at the rear - Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side, front, on the chassis - 15-pin power connector - LED lighting system 12/24 V - 2 LED reversing lights at the rear (activated via reverse gear) - Bolted underrun protection - Plastic quarter mudguards - Lashing hooks at each position of the central locking system and 2 on the front panel - Chassis made of fine-grained steel - Two-step access in front of the front panel, left-hand side - 3-way tipping body in steel pallet design with reinforced 600 mm "Strong" drop sides - Continuous side walls on top, with internal tube reinforcement (without centre stanchions), fold-down with sidewall spring assist - Rear stanchions bolted - Combined steel wing-door tailgate, 2-wing, asymmetrically split, 270° pivotable and lockable (not fold-down), plus additional pendulum frame for automatic tailgate opening during tipping - Locking via galvanized rotary bar lock at the rear and central locking - Deactivation function for automatic tailgate opening when reversing with open wing doors - 1 x 5 t lashing ring in each corner, 4 x 3 t lashing points embedded in the outer frame on each side - 4 mm floor plate made of S 420 MC 4 fine-grained steel - Recessed ramp rails at the rear - Reinforced body with load securing certificate according to EN 12642 XL Ksdpfx Ajxf Skvogqedw - 1 pair of aluminium loading ramps approx. 3.310 x 400 x 105 mm (capacity 8 t/pair) suitable for rubber-tyred and tracked vehicles; lockable storage compartment under the load area, recessed into the chassis at the rear - Chassis, drawbar, tipping platform, front panel, underrun protection, rear stanchion, rear folding supports and access steps hot-dip galvanized - Side panels and tailgate painted RAL 3003 ruby red - Axles, springs, air reservoirs and landing gear painted black - New vehicle with manufacturer’s warranty - Subject to prior sale and errors - Immediately available ex-stock Egestorf

Stanje: novo, največja dovoljena obremenitev: 8.410 kg, skupna masa: 11.900 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.420 mm, višina nakladalnega prostora: 600 mm, Leto izdelave: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5-ton BPW axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring system with display capability in the truck via EBS signal (no truck-side installation required) * Drawbar adjustable by 300 mm in height with 40 mm flange towing eye * Mechanical BPW landing gear at the front * 2 mechanical foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, fitted to the right side at the front of the chassis * 15-pin power plug * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (activated via reverse gear) * Bolt-on underrun protection * Plastic quarter mudguards * Net hooks located at each central locking bearing and 2 units on the front wall * Chassis made of high-tensile fine-grained steel * Two-step access ladder in front of front wall on driver's side * 3-way tipping platform body for pallets, made of steel, with reinforced 600 mm strong side walls * Continuous upper side walls with internal tube reinforcement (no center stanchions), fold-down with side wall spring assist * Bolt-on rear stanchions * Combi steel wing doors at the rear, 2-leaf asymmetrically split, can swing 270° and be locked (not fold-down), with additional pendulum frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking system * Deactivation function for automatic tailgate feature when rear tipping with open wing doors * 1 x 5-ton lashing point at each corner and 4 x 3-ton lashing rings recessed into the outer frame on each side * 4 mm steel floor plate made of S 420 MC 4 fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with cargo securing certificate according to EN 12642 XL * 1 pair of aluminium loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 tons per pair), suitable for rubber-tired and tracked vehicles, with a lockable storage compartment under the loading area, integrated into the chassis at the rear * Chassis, drawbar, tipping bed, front wall, underrun protection, rear stanchion, rear foldable supports, and entry step hot-dip galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tank, and landing gear painted in black tone * New vehicle with manufacturer warranty Kdodpfexf Skpjx Agqow * Errors and prior sale excepted * Immediately available ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.360 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 400 mm, Leto izdelave: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tire pressure monitoring with in-cab display via EBS signal, no installation required on truck side) * Electronic Braking System (EBS) * Emergency release device for spring actuators * Drum brakes * Gigant axles * Air suspension with lift and lowering function * Drawbar height-adjustable by approx. 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox front right, mounted externally on the front wall * Side underride guard * Plastic quarter mudguards * LED lighting system * 15-pin electrical connector Kdodpfjndpn Sox Agqow * Hot-dip galvanized chassis, drawbar, front and rear walls * 50 mm softwood floor * Provision for retrofitting 20” container locks front and rear * Bolted front wall made from smooth sheet metal * Side walls made from trapezoidal-profile steel, folding, with tailboard spring lifter * Hot-dip galvanized, bolted rear stanchions * Perforated external frame, approx. 45° bent, with 2 t lashing capacity every 480 mm, optional installation of 3 t recessed lashing rings every 600 mm, front and rear corners each with 1x 6.3 t lashing point, various holes for 1.2 t lashing options in the front and rear crossmembers * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowage compartment at the rear integrated under the loading platform in the chassis * Vehicle hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and interim sale excepted * Immediately available ex Egestorf