Polpriklopnik z delovno ploščadjo nakup rabljenega (117)

Stanje: rabljeno, skupna masa: 23.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 7.014 mm, širina tovornega prostora: 2.236 mm, višina nakladalnega prostora: 95 mm, prva registracija: 05/2019, naslednji pregled (TÜV): 10/2026, * SAF osi * Skladiščna omara * Ploščad * Stranske stene * Lastna teža: 4.800 kg * Tehnični pregled (HU): 10.2026 * Poseben pregled (SP): 04.2026 Gedjxiur Depfx Affjuh -----Interna številka vozila: 11330----Pridržujemo si pravico do napak in vmesne prodaje

Stanje: rabljeno, skupna masa: 38.000 kg, lastna masa: 6.920 kg, največja dovoljena obremenitev: 31.080 kg, konfiguracija osi: 3 osi, prva registracija: 09/2023, vzmetenje: zrak, velikost pnevmatike: 385/65 R22.5, skupna dolžina: 2.550 mm, skupna širina: 4.000 mm, skupna višina: 13.200 mm, Oprema: ABS, Gsodam Plateau stakes | SAF axles | 1st axle liftable | Spare wheel holder | Toolbox | Tyres: 385/65 R22.5 | 6,970 kg tare weight, 31,080 kg payload | Stakes | Austrian vehicle | Very good condition | Subject to prior sale and errors. Gjdpfx Afsw Hw Ufjfeuh

Stanje: rabljeno, skupna masa: 48.000 kg, največja dovoljena obremenitev: 37.535 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually Gjdpfx Afsxgk U Nsfeuh * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: novo, skupna masa: 36.000 kg, največja dovoljena obremenitev: 30.250 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, skupna širina: 2.550 mm, Oprema: ABS, Krone Profi Liner (SDP 27 MEGA) _____ Details • Internal cargo length: 13,620 mm • Internal cargo width: 2,480 mm • Fifth wheel height: 980 mm • Multilock outer frame with universal load securing points every 100 mm _____ Axles/Tyres • BPW axles • Air suspension • Wheelbase: 1,310 mm • Disc brakes (370 mm diameter) • Wheel nuts with protective caps • 1st axle liftable • Tyre pressure monitoring system • KM counter _____ Attachments Gusdpfxon Hrtko Affoh • Toolbox • 10 pairs of stake pockets (81 x 81 mm) on the external frame • 15 pairs of Multi Lash lashing rings • 10 stake pockets (81 x 81 mm) centrally in the floor • 12 insertable stakes, total length approx. 1,950 mm • 12 insertable stakes, total length approx. 1,950 mm • 30 mm thick, waterproof floor panels _____ Accessories • 2x wide load signs incl. marker lights • Stake holder on the left side for 12 insertable stakes _____ Lighting • Multifunctional rear lights (Hella) • 2x LED license plate illumination • LED side marker lamps with indicator function • Rotating beacon (orange) • incl. 1 reversing spotlight _____ Paintwork • Chassis: RAL 9005 - jet black • Rims: natural silver • Landing gears: RAL 9005 - jet black • Axles: RAL 9005 - jet black • Front wall: RAL 7035 - light grey

Stanje: novo, skupna masa: 39.000 kg, največja dovoljena obremenitev: 33.500 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.460 mm, Leto izdelave: 2025, Oprema: ABS, * 2143 - ID vozila za telefonska povpraševanja Gjdowbmrcspfx Affsuh * Tip: S24-1 * ABS, EBS, BPW-osovine, zračno vzmetenje dviganje + spuščanje, kolutne zavore, dvižna os, pritrdilna ušesa, perforirani profili, pritrdilna ušesa za nakladanje na železnico in trajekt, shranjevalna škatla * Višina nakladanja: 1,19 m * Pnevmatske pnevmatike 1. os: 385/55R22,5 * Pnevmatske pnevmatike 2. os: 385/55R22,5 * Pnevmatske pnevmatike 3. os: 385/55R22,5 ----naš e-poštni naslov:     naš servis za vas:       - Ureditev kratkoročnih ali carinskih tablic       - Prevoz / dostava po celotni EU       - Carinjenje vozil v tretje države Če imate vprašanja v ruskem jeziku, lahko pokličete na naslednjo številko * WhatsApp samo za govorce ruskega jezika: * Whatsapp za angleščino, nemščino in druge jezike:

Stanje: rabljeno, skupna masa: 45.000 kg, največja dovoljena obremenitev: 35.721 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.550 mm, prva registracija: 07/2024, naslednji pregled (TÜV): 07/2025, Leto izdelave: 2024, skupna širina: 2.550 mm, Oprema: ABS, 3-axle SANH FAYMONVILLE Max-Trailer 200 Mega Platform Forklift Transporter First registration: Fifth wheel height: 950 to 1,050 mm Rear swing clearance: 2,300 mm Gjdpfxow I Ix Ns Affsuh Loading area length: 13,500 mm, extendable by 3,400 mm Loading area at the rear hydraulically raisable/lowerable over a length of 2,100 mm Wired remote control Drivable with 12,000 kg axle load 9 pairs of lashing rings (LC 5,000 daN) 3 pairs of lashing rings (LC 10,000 daN) 6 x 435/50 R 19.5 tyres TPMS tire pressure monitoring system BPW axles, air suspension, with disc brakes 1st axle: LIFT AXLE 3rd axle: Steering axle WABCO Trailer EBS Steel front wall approx. 1,200 mm high, EN12642-XL Hydraulic rear section with grating covering 1 pair ALU loading ramps 1,500 x 450 x 120 mm Electro-hydraulics 24 V 6 pairs WADER container locks 10 pairs of stake pockets for plug-in posts on the outer frame 3 pairs of crosswise mounted stake pocket rails on the loading area Side extensions, extendable by approx. 230 mm per side Electric cable winch with radio remote control, approx. 5,400 kg lifting capacity, 24 m wire rope Oversize warning panels, extendable by 400 mm per side RENTING is the new BUYING – with us also available immediately as full-service rental-----

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.606 mm, širina tovornega prostora: 2.460 mm, prva registracija: 06/2006, ----Dvižna os / Škatla za shranjevanje / Naprava za priložen viličar ----* Gedpfx Asxbmawsffjuh

Stanje: novo, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 750 mm, Leto izdelave: 2024, Oprema: ABS, ( sample images ) KRONE TRIDEC 3-axle Construction Material Semi-Trailer SDP 27/eLNZ4-BS / 750 mm sideboard height / TRIDEC Manufacturer: KRONE Initial registration: NEW VEHICLE Dimensions: 13,620 x 2,480 x 750 mm Gross vehicle weight: 36,000 kg Unladen weight: 7,019 kg Air suspension with lift/lower function, disc brakes, spare wheel holder, ABS, EBS, axle manufacturer: BPW ECO PLUS version 3 Gedpfx Asu S Tzbsffjuh Lift axle, phenolic plywood floor, lashing rings, toolbox, exterior paint: black KTL, body paint: white Chassis paint: black KTL, 6 wheels, tyre condition: 100%, rear axle tyres: 385/55 R 22.5 4 pairs of drop sides with 750 mm height CONSTRUCTION MATERIAL SEMI-TRAILER with 29 stake pockets 81 x 81 mm, both central and on the outer frame + 12 steel stakes left on the frame 12 pairs of reinforced lashing holes each rated at 4 t 12 pairs of multi lash rings Multilock outer frame (usable with closed sideboard) Reinforced steel front wall 1600 mm high Fully automatic LIFT AXLE 15 + 2 x 7-pin socket at the front Toolbox / spare wheel holder BPW ECO PLUS VERSION 3 !!!!! TRIDEC FORCED STEERING SYSTEM (Rod and 2 x turntable) – suitable for all construction sites Wheelbase 1,310 / 2,050 mm All details are subject to change and without guarantee, prior sale reserved!! If you have any questions regarding this or other vehicles, please call us.

Stanje: rabljeno, skupna masa: 48.000 kg, največja dovoljena obremenitev: 38.080 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, naslednji pregled (TÜV): 02/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpts from the equipment details. Full specification available upon request. Cargo Area * Extendable cargo area equipped with pneumatically-operated locking mechanism * Loading platform with approximately 30 mm thick wooden floor encased in omega profiles * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approximately 24 t lift capacity (approx. 50 t test capacity) Axles * BPW axles and suspension * All axles with hydro-mechanical forced steering * Equipped with disc brakes Gjdpfxoxf Sifo Affouh * Technical axle load: 10,000 kg (ET 0) each * Air suspension with raise and lower valve * Axle tools included Tyres * Tyres 385/65 R 22.5 Brake System * Brake system compliant with EU regulations, EBS-E (2S2M), no connecting lines to the tractor unit Warning Signs * At the gooseneck and rear end panel, holders for warning panels provided, including socket Electrical System * Electrical system compliant with EU regulations * 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection panel with 24N, 24S & 15-pin sockets, connections according to ISO 24N ISO-1185 24S ISO-3731, 15-pin ISO-12098 Steel Construction * Steel structure made from high-strength fine-grained steel * Steel grades S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * Premium, durable corrosion protection through 2-component (2K) zinc dust primer on the standard shot-blasted welded frame * High-quality, single-tone 2-component (2K) topcoat in RAL 3002 carmine red * Rims in silver; attachments as per manufacturer's choice * Rear end metallised and painted in RAL 9010 (pure white) Included Accessories * 2-inch king pin * 4 wheel chocks with holders on the front wall * Steering from front and rear via cable remote control with push buttons, axle single-track control (no installation in tractor unit) * Manual and description on USB stick * Electro-hydraulic unit * Yellow-red air couplings on galvanised connection panel at the front * Yellow reflective tape in line with EU regulations on sides, extension, and rear of the trailer * European reflective plates (red-yellow) at the trailer rear * One mudflap at the trailer rear * Holder for a rotating beacon at the trailer rear * 10 pairs of stake pockets (100x50 mm) integrated into the external frame of the cargo area * 1 spare wheel holder under the right-hand side of the platform (in direction of travel) * 80 km/h speed limit stickers on rear and on both sides * Load manometer for determining axle loads, including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks on the loading platform for 1x20', 2x20', or 1x40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stake pocket rails mounted in the platform for approx. 100x50 mm stakes * Storage for stakes inside the front wall * Climbing ladder mounted in driving direction left and right * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front left under the cargo area * An additional we...

Stanje: novo, skupna masa: 36.000 kg, največja dovoljena obremenitev: 29.400 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, Leto izdelave: 2025, skupna širina: 2.480 mm, skupna višina: 2.000 mm, Oprema: ABS, Brand new Krone Profil Liner SDP 27 3-axle platform semi-trailer * Krone axles * First axle as lift axle * Mechanical landing gears (12t) * Tyres: 385/65 R22.5 * 1x plastic toolbox * Pallet box for 24 Euro pallets Godpfxjvw Hlcs Affjuh * Coupling height: 1,150 mm * Spare wheel carrier * Reinforced front wall * MULTILOCK outer frame * 6 pairs of heavy-duty lashing rings * Stake pockets on the sides and in the centre * Six extendable stake pockets per side * Six lashing winches per side for cargo securing * 18 insertable stanchions * 4 illuminated oversize signs * Rotating beacon ORANGE Sample pictures For further information, please feel free to contact us.

Stanje: rabljeno, skupna masa: 18.000 kg, največja dovoljena obremenitev: 10.540 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.500 mm, prva registracija: 05/2009, naslednji pregled (TÜV): 01/2025, Leto izdelave: 2009, Oprema: ABS, * Pridržujemo si pravico do napak in vmesne prodaje Godewb Rwispfx Affeuh * Ogled možen le po predhodnem dogovoru * Na povpraševanja o zadnji ceni ne odgovarjamo * Na povpraševanja preko WhatsApp-a ne odgovarjamo * Videoposnetki niso narejeni

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 28.740 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 2.630 mm, prva registracija: 10/2018, Leto izdelave: 2018, skupna širina: 2.550 mm, skupna višina: 3.400 mm, Oprema: ABS, SCHWARZMÜLLER 3-axle flatbed semi-trailer RH220 - extendable - hydraulic forced steering TRIDEC First registration: 10/2018 German trailer, single owner! Semi-trailer completely sandblasted, newly painted, new floor, new brake discs and pads, new tires, 2x new steering cylinders, etc. Gross weight (technical): 39 t Axle load (technical): 27 t Fifth wheel load (technical): 12 t Unladen weight approx. 10.24 t (+/- DIN tolerance) Flatbed length approx. 13,500 mm = front approx. 4,100 mm, rear approx. 9,400 mm Flatbed width approx. 2,540 mm Kingpin height approx. 1,150 mm Loading height approx. 1,370 mm Godpfx Aow Hmkvoffjuh Extendable lightweight central frame construction with pneumatic locking, frame height 220 mm Extension length approx. 7,500 mm, can be locked every 500 mm Reinforced lashing bracket outer frame 5 mm with 23 x 4 t lashing brackets Outer frame recessed every approx. 200 mm underneath 10 pairs of 5 t lashing rings, retractable and folding outward from the outer frame profile, also for oversize transport, approximately evenly spaced Indicator light for frame locking front left Frame locking with lubricating rail 11 pairs reinforced stake pockets 100x50 mm, longitudinally mounted, distributed evenly: 3x front platform, 1x intermediate support, 7x rear platform 5x cross-member stake pockets 100x50 mm, transverse with lashing holes max. 2000 daN, spaced approx. 720, 1,710, 3,200, 5,500, 12,500 mm 22x stakes 100x50x5 mm, L=600 mm, hot-dip galvanized, stake securing 5x 5 t lashing rings on cross-members under the rear platform, distributed evenly Fixed, movable intermediate support, approx. 300 mm wide, mechanically lockable (1 pair stake pockets and 1 pair 5 t lashing rings integrated in the intermediate support) Landing gears, 2 x 12 t JOST 3x SAF Intradisc B9 axles with disc brakes Ø430 mm (22.5" disc), bogie spacing approx. 1,810 + 1,810 mm Hydraulic force steering "Tridec HS" — 3 turntable-steered axles, automatic forced steering, front turntable plate with steering wedge, hydraulic transfer in two-circuit design up to 80 km/h "BEKA-MAX" centralized lubrication system with integrated pump, timer controlled Electronic auxiliary steering "Tritronic V2" for maximum steering angle independent from tractor unit, for maneuvering up to max. 20 km/h, with radio remote control, automatic track alignment Electrohydraulic pumping unit 14-litre oil tank, 2 containers for pump unit + control valves Power supply via NATO socket Tires 385/55 R 22.5, 160J FIRESTONE NEW, steel rims 11.75 x 22.5 Braking system EG-71/320 ECE R13 Wabco EBS system 2S2M RSS stability program Spring-loaded parking brake on 2 axles Aluminum air tanks Air suspension with raise/lower function, quick-release valves Axle load display EBS-Canbus + Wabco SmartBoard Floor spruce 40 mm, longitudinal fitted (NEW) Reinforced 4 mm steel front wall approx. 2,000 mm, 4x reinforced center struts, 9 mm phenolic board 2x aluminum side walls 400 mm, approx. 2,000 mm long 24 V lighting 76/756/EWG Partial LED taillights "Europoint III" LED position/outline/side marker lights 2 x 7-pin / 1 x 15-pin socket 2 LED reversing lights 1 removable rotating beacon 3-pin sockets at rear Chassis steel shot cleaning, zinc phosphate priming, spray-painted with 2K topcoat Chassis, outer frame, front wall + corner posts = RAL 3002 Carmine Red Contour marking ECE 48 Plastic mudguards with spray protection Rubber impact protection rear Access ladder rear right Steel profile underrun protection Black aluminum lamp carr

Stanje: rabljeno, skupna masa: 62.500 kg, največja dovoljena obremenitev: 45.660 kg, konfiguracija osi: 3 osi, prva registracija: 03/2000, naslednji pregled (TÜV): 02/2026, skupna širina: 2.550 mm, Oprema: ABS, In accordance with our "General and Stated Terms and Conditions" and without any guarantee or warranty, we are pleased to offer you the following vehicle on a non-binding basis until conclusion of contract, subject to error, typographical mistakes, and prior sale: ESGE 4-Axle Extendable Platform Trailer to 35,850 mm Type: 4.VOD-25-404H.13 (Vehicle 403) First Registration: 16.03.2000 Permissible Total Weight: 62,500 kg Unladen Weight: 16,840 kg Payload: 45,660 kg Overall Length: 16,150 mm, extendable twice up to 35,850 mm Overall Width: 2,550 mm Safety Inspection 08/ , TÜV x 12 t 2-speed gearbox support winches Extendable and illuminated width extension boards front and rear + front with beacon hooks Beacon hook rear 2 x 12 t 2-speed gearbox support winches Guedpsxara Hsfx Affjh 1st axle lift axle SAF axles Tires: 275/70R22.5 - 1st FS approx. 40/80% - 1st BFS approx. 50/60% - 2nd and 3rd approx. 80/80% - 4th FS approx. 80/50% - 4th BFS approx. 80/80% All 4 axles hydraulically steered Spare wheel approx. 60% Toolbox driver's side, center Air suspension with lift and lower function Loading height approx. 1,650 mm 14 plug-in stanchions, 2 pairs of spindle pockets with reinforced stanchions 14 pairs of stake pockets in outer frame 1 crosswise stake pocket in front of rear, 1 crosswise stake pocket in front of spindle pockets, 1 stake pocket in the front Storage compartment on the gooseneck, front Price: €27,500.00 (net) All information is given without any guarantee or warranty. Our General and Stated Terms and Conditions apply. Place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court Ludwigslust; for disputes exceeding this value, the District Court Schwerin is competent. Subject to error, typographical mistakes, and prior sale.

Stanje: rabljeno, skupna masa: 27.000 kg, največja dovoljena obremenitev: 21.320 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 13.550 mm, višina nakladalnega prostora: 800 mm, prva registracija: 06/2024, Leto izdelave: 2022,

Stanje: novo, skupna masa: 66.500 kg, največja dovoljena obremenitev: 56.590 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Further vehicles available at Extract of the equipment. Full equipment details available on request. Chassis Chassis frame construction made of welded longitudinal beams and through-inserted crossmembers * Underrun nose width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5 inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing gears * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles * 4 x 10 t SAF axles with large drum brakes * 22.5 inch single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Mounting for lifting and lowering device, bolted version Brakes * Smartboard/TIM/Info Center at the lifting and lowering holder, in addition to the lift/lower valve, without battery (only operable with towing vehicle) * Bracket for lighting and brakes at the front of the underrun nose, total height approx. 700 mm * Tyre pressure monitoring basic version, connected to the CAN bus system of the EBS * With double release valve for brake and spring accumulator * Test nipple for brake cylinder pressure on the front right brake cylinder * One coupling head each, red and yellow * Lift and lower device mounted rear left in direction of travel * EBS brake system, manufacturer Wabco * EBS diagnostics via CAN-Bus (EBS socket), no external diagnostic cable! Tyres * 8x 445/65 R 22.5 – branded make of our choice * Hub centering Lubrication Grease nipple strips on the bogies and at the steering front * No central lubrication Body * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rear), switch at the lifting/lowering holder * Front wall for platform in heavy-duty version * Outline marking lateral yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal covering, bolted version Lighting system 2x LED work lights, mounted in lamp plate, activated via reverse gear * 2x LED work lights, activated via reverse gear, one per side near landing gear * 2x LED reversing lights, one per side in front of the 1st axle * Lighting/wiring system, manufacturer of our choice * Number plate illumination * The towing vehicle must provide sufficient power for the selected lighting (especially reverse light) * Position lights at the front, bottom, one each right and left (LED) Godpoxfx Rvsfx Affouh * Lighting system 24V with large multifunction lamp * Blinking side marker lights (LED) * 1x 15-pin and 2x 7-pin connectors at the front via multifunction box * EBS socket * 1 pair lane-keeping lights (LED) Floor * Hardwood floor approx. 28 mm, alternating with galvanized Omega steel profiles Accessories * "Vehicle swings out" sticker at the rear area * Marking plate (ECE) at the rear at our discretion * Aluminium underrun protection * Access ladder at the rear right, foldable and extendable (without platform) * 2 wheel chocks with bracket at the front wall * 2 rubber buffer pads at the rear corners Mudguards * Rear mud flaps with ES-GE advertising * Plastic mudguards, 180 degrees, above each axle * 4 pairs anti-spray mud flaps for single tires Paintwork/coating * Chassis painted in RAL 1007 Narcissus Yellow * Front wall (steel construction) in RAL 1007 Na

Stanje: novo, skupna masa: 42.000 kg, največja dovoljena obremenitev: 33.190 kg, konfiguracija osi: 3 osi, Oprema: ABS, Frame * Standard ladder-type frame made of lightweight steel construction with through-bolted crossmembers * With chassis frame camber (pre-cambering) * Coupling plate approx. 8 mm thick, with a 2-inch king pin in accordance with DIN 74080 / ISO 337 Chassis * For indivisible loads, an increase of the total towing weight is permissible * Axle lift on axle 1, fully automatic, load-dependent control of the axle lift * Manufacturer of choice: Kögel * Tri-axle assembly with disc brakes, Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm stroke Vehicle tyres * Wheels with internal sensors according to UN ECE R141 * Tyres: 6 x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims, size 22.5 x 11.75, offset approx. 120 mm (ET 120) Chassis attachments * Landing legs (manufacturer of choice from Kögel), mechanically operated with compensation foot, approx. 24 t lifting capacity. Single-sided operation on the right in travel direction * Spray suppression system according to Regulation (EU) No. 109/2011 * 1 pair quarter-circle mudguards in front of the axles * 1 pair straight mudguards with mudflaps between the 1st and 2nd axle * 1 pair quarter-circle mudguards with mudflaps behind the axles * 2 wheel chocks with holders Gusdpfxoxcdmqj Affsh * Side guard according to ECE-R73 * 2 waterproof plastic toolboxes, inside dimensions approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right * Retractable access ladder at the rear right * High, rigid rear underrun protection made of steel, according to ECE-R58 * 1 pair each of extendable, retro-reflective red/white warning boards for oversized loads, with LED lighting, spiral cable and plug connection. Positioned at the front and rear vehicle section Braking / Air suspension system * 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic port via ISO 7638 connector * EBS system (manufacturer of choice from Kögel) * Air suspension system incl. 1 lifting and lowering valve, installed on the left behind the axle assembly in direction of travel. Ride height is set automatically * 2 non-interchangeable coupling heads at the front, ISO 1728 * Steel air tanks for brake system and air reserve (EN 286-2) Floor * Plate floor approx. 30 mm thick * Floor circumferentially sealed * Stake pockets for square tube insertable stanchions approx. 80 x 80 mm, positioned according to drawing J9: 8 rows of stake pockets (18 pockets per row: 4 outside + 10 in the center per row) Front wall * Storage for max. 14 insertable square tube stanchions approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall * Front wall approx. 2,000 mm high with volumetric corner posts made of steel, with profiled steel sheet, bolted/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall as per EN 12640 Side wall * VarioFix steel punched exterior frame * 24 pairs of lashing rings on the outer frame (to EN 12640), permissible pull force approx. 5,000 kg per ring Impact protection * 1 pair of steel buffer blocks, approx. 160x85x85 mm, mounted on the outside of the rear end plate * Crosswise zinc-plated steel angle as forklift protection, including latch protection in the center, mounted on the rear end plate Electrics / Electronics * Lighting bracket made of steel, positioned above the

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm Gusdpfx Asw U H Sbjffjh * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: novo, skupna masa: 48.000 kg, največja dovoljena obremenitev: 38.400 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Platform with approx. 30 mm thick wooden floorboards * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching lashing straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck is via the standardised EBS interface according to ISO 11992. For correct display, the truck must be capable of transmitting and displaying this data. Axle: * BPW axles and suspension * All axles hydro-mechanically force-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made from high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical installation according to EU regulations * LED lighting, 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets, connections according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically blasted after welding using a wheel blasting machine * Second blasting treatment with corundum for optimal adhesion of the coating system * Final coat with 2 layers of 2K topcoat, in a single colour RAL 3002 Carmine Red conforming to RAL system 841GL * Rims in silver grey * Rear end metallised and painted RAL 9010 (Pure White) * No metallic paint possible * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, axle single-track control (without installation in the tractor unit) * Electro-hydraulic power pack * 4 wheel chocks with holders on the front bulkhead * 2-inch king pin * At the galvanised connection panel at the front, yellow-red air line couplings * At the gooseneck and rear left and right, one holder each for warning panels, including socket * 10 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container lock pockets in the platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container; the extension includes an additional locking point for a 45' container * 4 pairs of crosswise stanchion pocket bars in the platform, for plug-in stanchions approx. 100 x 50 mm Gsdpfxew Tpr Ij Affeuh * Storage for up to 9 pairs of plug-in stanchions bolted to the inside of the front bulkhead * Access ladder mounted front left and right in direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the platform on the

Stanje: novo, skupna masa: 73.000 kg, največja dovoljena obremenitev: 61.050 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt of equipment. Full equipment details available upon request. Load Area: * Load area with approx. 30 mm thick hardwood flooring * 10 pairs of outward-folding lashing rings (LC 10,000 daN) Landing Legs: * JOST mechanical landing legs with two-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technical capacity 12,000 kg each * 1st axle with steered leading axle, 2nd axle rigid, all other axles hydro-mechanically forced steered, mounted on turntables * Air suspension with lift and lower valve Guodpfx Aew Tpr Usffjh * Axle tools Tyres: * Tyres 445/65 R 22.5 169K - Brand of our choice, TPMS * TPMS tyre pressure monitoring system as per ECE R 141 * Data transmission to the truck is via standardised EBS interface per ISO 11992 * For correct display, the truck must be capable of transmitting and displaying this data Brake System: * Wabco brake system according to EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lamps flash with the indicator * ASPÖCK-UNIBOX at the front connection panel with sockets 24N, 24S & 15 pin connection as per ISO. 24N ISO-1185 24S ISO-3731 15 pin ISO-12098 Steel Construction: * Steel construction made from high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting: * Complete steel construction automatically shot-blasted after welding * Second abrasive blasting with corundum for optimal adhesion of the coating system * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection * Final painting with 2 layers of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL system 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver grey * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax * Metallic paint not possible Includes the following accessories: * Load area with approx. 30 mm thick hardwood flooring * 2-inch king pin * One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanised front connection rail * Storage for approx. 1,000 mm plug-in stakes in the rear centre beam * At the gooseneck and rear panel left and right, each with a holder for warning plates, including socket * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the load area * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading condition * 7 pairs of galvanised plug-in stakes, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of transverse stake pocket strips mounted in the load area, for plug-in stakes approx. 100 x 50 mm * 2 pairs of WADER container pockets in the load area, for 1x10' * 1 shunting coupling with reinforcement bolted to the rear crossmember * BEKAMAX (Pico) central lubrication system with standard grease NLGI-2 and removable protection around the pump * Hydraulic...

Stanje: novo, skupna masa: 45.000 kg, največja dovoljena obremenitev: 36.245 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and soon available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Loading Area: * Hardwood floor loading platform with rear chamfer approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out external lashing rings (LC 5,000 daN) * 2 pairs of fold-out external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing strap hooks (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspended * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – make at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via standardised EBS interface according to ISO 11992. The tractor unit must support and display these data for correct operation. Braking System: * Wabco braking system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor Steel Structure: * High-strength fine-grained steel construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system compliant with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with indicators Guedpjw Tpqqofx Affsh * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted by turbine after welding * Second shot-blasting with corundum for optimal coating adhesion * HRM metalising of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) for best corrosion protection * Final coating with two layers of 2K top coat, single colour RAL 3002 Carmine Red in accordance with RAL System 841GL * Rear section metalised and painted in RAL 9010 (Pure White) * Coating system tested in salt spray test to ISO 9227-NSS * Sealing of cavities with special wax * Metallic finishes not possible Including the following additional equipment: * Yellow-red air couplings on galvanised front connection strip * 4 wheel chocks with holders * 2-inch kingpin * Loading area with heavy-duty hardwood floor * 1 spare wheel holder under the loading area, right side in direction of travel * Galvanised folding supports under the loading area rear chamfer * 9 pairs of pockets for insertable stanchions, approx. 100 x 50 mm, in the outer frame of the loading area * 1 galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Painted sand layer on the central beam as anti-slip coating * 1 stainless steel (INOX) toolbox, transverse under the loading area, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading area, for 1x 20' container, 2x 20' container or 1x 40' container * 3 pairs of transverse stanchion rack rails installed in the loading area, for insertable stanchions approx. 100 x 50 mm * Rack for max. 9 pairs of insertable stanchions approx. 100 x 50 mm at front wall, bolted from inside * 2 stainless steel (INOX) toolboxes under the loading area left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the loading area, behind the axles * 1 beacon li

Stanje: novo, skupna masa: 66.500 kg, največja dovoljena obremenitev: 56.570 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specification available on request. Chassis: * Chassis frame construction made of welded longitudinal members and through-inserted crossmembers * Underrun nose approx. 700 mm wide * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal members * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch kingpin according to SAE standard, exchangeable * Outer frame as UNP 200, open to the outside * Technical fifth-wheel load 26,500 kg Landing legs: Gusdswx Dctjpfx Affoh * 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity * Lift and lowering device with 1 rotary slide valve Knorr/Wabco * Holder for lift and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter at the lift/lower control holder, in addition to the lift and lower valve, * Without battery (only operable with towing vehicle) * Holder for light and brake at the front on the underrun nose, overall height approx. 700 mm * Basic version tire pressure monitoring, connected to EBS CAN-bus system * With dual-release valve for brake and spring brake * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at the rear left in the driving direction * Wabco EBS brake system * EBS diagnostics via CAN-bus (EBS connector), no external diagnostic cable! Tires: * 8x 445/65 R 22.5 – premium brand of our choice * Centering sleeves Lubrication: * Grease nipple strips on the bogies and at the steering at the front. * No central lubrication system Body: * Without body certificate according to DIN EN 12642 XL * LED work lights, 2x mounted on top of the front wall (facing rear), switch on lift/lower control holder * Front wall for platform in heavy-duty design * Side contour markings yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * Work lights 2x LED, mounted in lamp bar, controlled by reverse gear * Work lights 2x LED, controlled by reverse gear, 1x per side near landing legs * Reversing lights 2x LED, 1 per side in front of the 1st axle * Lighting/wiring system brand of our choice * Number plate illumination * The towing vehicle must provide sufficient power for the selected lighting (particularly reversing light) * Position lights at the front, bottom, white, 1 each on right and left (LED) * 24-volt lighting system with large multifunctional lamp * Side marker lights (LED), flashing * 1x 15-pin and 2x 7-pin front connection via multifunction box * EBS socket * 1 pair lane marking lights (LED) Floor: * Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Painting/Coating (no metallic colors): * Chassis painted RAL 3002 carmine red * Front wall (steel construction) painted RAL 3002 carmine red * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminium/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates per side, welded into outer frame. Lashing capacity max. 3,000 daN * 12 per side...

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 32.340 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, naslednji pregled (TÜV): 07/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point load Fifth Wheel Coupling * 2-inch kingpin Rear Underrun Protection * Bolted version, compliant with EU standards Side Underrun Protection * Compliant with EU standards Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle assemblies * Disc brakes * Manufacturer: Gigant Brake System * Two-line compressed air brake system according to EU standards with EBS and RSS * Automatic load-dependent control * Spring brake cylinders as parking brake * Non-interchangeable coupling heads mounted solidly on front cross member, without connection line to the truck * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 steel rims Mudguards * In accordance with EU standards * PVC mudguards before and after axle assembly Spare Wheel Carrier * 1 unit twin basket with mounting kit for one spare wheel with ET 120 Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.5 t * On the outer frame, drill holes for lashing straps every approx. 500 mm Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm phenolic resin plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting System * In accordance with EU standards, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline marker lights at rear Guodpfx Aowbb Ufoffeh * Number plate lights * 1 x 15-pin and 2 x 7-pin plug sockets on the front cross member Paintwork * Chassis and front wall blasted, primed, and painted in single color * Chassis: RAL 3002 Carmine Red * SSV: aluminium anodized * Rear underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Optional Equipment * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets transverse to the cargo area * 20 stakes made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stakes inside front wall * 5 x 25 side walls and rear wall made of anodized aluminium hollow profiles, approx. 600 mm high, foldable and removable * Removable Kinnegrip stakes * Insertion rails for side walls and stakes under the chassis left and right * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, skupna masa: 42.000 kg, največja dovoljena obremenitev: 34.350 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Partial list of equipment. Full equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with reinforced crossmembers, designed for high floor and point loads, with heavy-duty outer frame * Rear loading floor as steel welded construction, with two welded-in external drive tracks made from 5-hole steel sheet (Lohr/Rolfo hole pattern system), approximately 2,250 mm long, hydraulically lowerable by approx. 350 mm * Rear of the vehicle features an integrated loading platform, extendable by approx. 1,500 mm hydraulically; steel welded construction with 5-hole steel sheet cover (Lohr/Rolfo hole pattern system), integrated lights, two ramp storage compartments, and ramp supports * Rear end drive and control via electrical-hydraulic power pack, mounted in a stainless steel box on the left side of the chassis, with radio remote control * Power supply from the tractor unit’s vehicle battery (NATO socket on the front wall, without connecting cable to the truck) Coupling Device: * 2-inch king pin, replaceable from below Underride Protection: * Fixed installation as per EU regulations Landing Legs: * 2 x 12 t support legs with 2-speed gear Axles: * 3 x 9 t air-suspended axle units * SAF brand with disc brakes approx. 370 x 45 mm * ABS * 10-hole centrally located wheel bolt circle, ET120 * Total air suspension stroke approx. 310 mm, with lift approx. 220 mm and lowering approx. 90 mm * Air suspension control via hand lever with stop function Lifting Axle: * 1st and 3rd axles can be lifted automatically, also manually via control at the chassis frame or via PIN 12 of the light socket Tyres: * 6 units, 445/45R19.5, fitted on 14.00x19.5 rims, 10 holes, ET120 Gedpfowt Iylsx Affjuh Mudguards: * As per EU standards, 1/4 PVC mudguards * 1st axle front and rear; 2nd and 3rd axles rear Brake System: * Wabco brand * Dual-circuit braking system in accordance with EU regulations, with EBS and automatic load-dependent control * Spring-actuated parking brake active on 2 axles * Reversed coupling heads solidly mounted on front crossmember, no connection line to truck Lighting Equipment: * As per EU standards, 24 Volt * Multi-chamber tail lights * Number plate lights * LED side marker lights * White LED position lights at the front and LED lane marker lights at the rear * 15-pin socket and 2x7-pin sockets firmly attached to the front crossmember, no connecting lines to truck Load Securing: * 9 pairs of foldable lashing rings evenly distributed, traction approx. 8 t * 8 pairs of foldable lashing rings evenly distributed, traction approx. 2.5 t * 2 pairs of foldable lashing rings at the rear, traction approx. 2.5 t * On the outer frame, holes for lashing straps every approx. 500 mm Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pocket Sockets: * 8 per side recessed into the outer frame * 4 rows of sockets transversely across the loading area Floor: * Approx. 28 mm Z-hardwood floor, recessed in outer frame Front Wall: * Solid front wall * Storage for 16 plug-in stakes approx. 100/40 * Front wall bolted to head frame Equipment: * 2 wheel chocks with holders * 2x PVC toolbox, approx. 600/400/500 mm * Rear rotating beacon holder incl. beacon * 2 LED reversing lights (at rear) * 2 aluminum loading ramps, approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair

Stanje: novo, skupna masa: 45.000 kg, največja dovoljena obremenitev: 39.850 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment features. Full equipment specification available upon request. Chassis: * Welded construction made from high-quality steel profiles with punched crossmembers * Designed for high point loads. Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underrun nose approx. 700 mm wide * Mounting interface for customer-side installation of a support device at the front, approx. 90 x 90 x 4 mm Coupling device: * 2-inch king pin (also suitable for 3.5) Underrun protection: * According to EC regulations, bolted version Side impact protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) with S-foot Axles: * 3 x 9 t air suspension axle units, brand of our choice, with disc brakes approx. 430 x 45 mm * ABS * Wheel connection, center guided, 10-hole with offset 120 * Total lift of air suspension approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, control via rotary slide valve with detent feature, with RTR function * Switch for second ride height (+ approx. 50 mm) mounted at the lifting/lowering unit bracket * Smartboard/TIM/Infocenter, no TPMS display Lift axle: * First axle liftable, with fully automatic, load-dependent lift control, start-up aid via button in driver’s cab (15-pin socket PIN12). Button in driver’s cab not included in delivery Brake system: * Manufacturer of our choice * Two-line compressed air braking system according to EC with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mismating-proof coupling heads permanently mounted to the front crossmember, without connecting line to truck Tyres: * 6 pieces, 385/65 R22.5 160J on rim 11.75 x 22.5 (brand of our choice), offset 120 * Basic version tyre pressure monitoring, connected to EBS CAN-bus * Tyre pressure indicator in driver’s cab (pre-installed by chassis manufacturer) Mudguards: * According to EC, PVC mudguards (half-shell) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into outer frame (tensile strength approx. 3 t) * 6 pairs of lashing rings mounted on side of outer frame, evenly distributed (tensile strength approx. 10 t) * 13 pairs of lashing points (hoops) in outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/Posts: Godpfx Afewx Dbpjfsuh * 5 pairs of stake pockets recessed in outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with lower stop Front wall: * Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: * Magazine for plug-in stakes inside front wall Floor: * Approx. 28 mm hardwood floor recessed into outer frame, with galvanized omega steel profiles Lighting system: * According to EC, 24 volts with multi-chamber lights * LED side marker lights * White LED position lights at front * LED outline marker lights at rear * License plate lights * 1 × 15-pin and 2 × 7-pin sockets on front crossmember Equipment: * Two wheel chocks with holders * Warning plate according to ECE 70 * 2 LED work lights on lamp carrier (switched via reverse gear) * Bracket for rotating beacon at rear (including rotating beacon) * 1 foldable an

Stanje: rabljeno, skupna masa: 39.000 kg, največja dovoljena obremenitev: 33.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2024, naslednji pregled (TÜV): 06/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our full stock of vehicles, including those available for immediate and short-term delivery, on our website. Excerpt from the equipment specification. Full specification available upon request. Chassis - Standard ladder-type steel lightweight frame with through-bolted cross members - With chassis frame camber - Cover plate between outer frame and longitudinal member as tire guard for the rear wheels of the tractor unit - Coupling plate approx. 8 mm thick, fitted with a 2-inch king pin according to DIN 74080 / ISO 337 Running Gear - Axle lift mechanism on axle 1 - BPW three-axle ECO Air unit with disc brakes, approx. 370 mm diameter, ET 120 - Air suspension with approx. 260 mm stroke Vehicle Tires - 6 tires, size 445/45 R 19.5, 160J Chassis Attachments - Mechanical landing gear with compensating foot, approx. 24 t lifting capacity, single-side operation (right-hand side in direction of travel) - Tool-free foldable side underrun protection, right and left in direction of travel - Spare wheel carrier with winch incl. 1 wheel fixing kit, mounted behind the axle assembly - Storage for 16 square tube posts approx. 80 x 80 x 1,990 mm, fitted to the longitudinal beam left and right in direction of travel - Waterproof plastic toolbox, internal dimensions approx. 545 x 400 x 400 mm, mounted rear left in direction of travel - Rear right access ladder, extendable Brake / Air Suspension System - EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connector ISO 7638 (without connecting cables) - Parking brake as spring brake actuator - External pneumatic connections and EBS diagnostic port via ISO 7638 connector - WABCO EBS system - Air suspension system incl. 1 raise/lower valve, mounted left behind the axle assembly in direction of travel. Driving position adjusts automatically - 2 fail-safe coupling heads, front (ISO 1728) - Air tanks for braking system and air reserve made of steel (EN 286-2) Floor - Floor panels approx. 30 mm thick, multi-ply bonded plywood - Floor sealed at rear Godpfovxyvdjx Affjuh - Stake pockets for square tube posts approx. 80 x 80 mm, arrangement as per drawing J9: 8 rows of stake pockets (18 pockets per row: 4 outer + 10 center per row) Front Wall - Front wall approx. 2,000 mm high with steel volume corner posts, profiled steel sheet, bolted/riveted to frame, 2 pairs of lashing points (permitted lashing force approx. 1,000 kg per ring) on bulkhead according to EN 12640. Note: If using the front wall for load securing, suitable lashing straps must be used for tensioning if the vehicle is operated without side boards and rear tailgate/door! Side Wall - VarioFix steel perforated outer frame - Without stake storage - 24 pairs of lashing rings in the outer frame (according to EN 12640), permitted tensile force approx. 5,000 kg per ring Electrics / Electronics - Steel light bracket, positioned above the underrun protection - KÖGEL LUXIMA premium package, comprising: LED license plate illumination, LED marker and reflector lights at front, flashing LED side marker lights, Superseal and bayonet connectors for the lights - 2 outline marker lights on arms, fitted to multi-chamber taillight - 2 multi-chamber taillights - Permanently mounted adapter box with two 7-pin sockets (1 x ISO 1185 / 1x ISO 3731, 24 V-N / 24 V-S) and one 15-pin socket ISO 12098 - Compact orange LED rotating beacon with mounting tube, positioned on the light bracket. Switch integrated in the lamp head