Schwarzmüller Tieflader Mit Gekröpftem Plateau nakup rabljenega (8.716)

Stanje: novo, največja dovoljena obremenitev: 23.800 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete inventory of vehicles available immediately or at short notice on our website. Excerpt of equipment. Full equipment details available upon request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform including sloped frame, corners beveled * Approx. 5,350 mm = low-bed platform – flat loading area * Approx. 850 mm = rear ramp slope * Overall width: approx. 2,550 mm (or approx. 3,000 mm with extensions) * Loaded loading height: approx. 870 mm * When assembling tractor-trailer combinations, compliance with the legally permissible overall height and train length must be observed! Chassis/Frame: * Steel welded construction with front frame cranking and rear bevel * Ramp slope with excavator bucket recess in the center = rear depression between longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 5 pairs of approx. 4 t lashing lugs (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out lashing rings, approx. 10 t (4x low-bed, 1x on ramp slope, 2x on raised platform) * Standard ball bearing slewing ring Frame attachments: * Both sides of the low-bed platform equipped with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery being transported must not exceed outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, arrangement: 1 pair at the front of the raised platform inside longitudinal beams, 1 pair right and left in the excavator bucket recess at the far rear, 1 pair at the front of the raised platform before the frame cranking, inside beams, 1 pair at the rear of the low-bed before the ramp slope in the bucket recess, left + right Towing device: * Fixed tow bar with swivel coupling eye approx. 40 + 50 mm, cranked design, silent bushing mounting, tow bar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Tow bar length approx. 1,800 mm Support equipment: * 2 automatic folding support legs at the rear Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity 11 t/axle, S-cam brakes approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires, size 235/75 R 17.5, 141J, brand as per factory selection Rsdey Aug Repfx Ah Hscb Brake system/Suspension: * Brake system according to ECE regulation R13 * Two-line air brake system * Manufacturer Wabco, EBS system 4S3M, 1st and 2nd axle equipped with sensors * RSS/RSP Stability Program * Spring-loaded parking brake on 2nd and 3rd axles * Brake/air connection lines with 2 separate couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift/lowering function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle bump stop on the front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS CAN bus signal for display in the driver’s cab (truck must be prepared accordingly, not a calibrated scale) * Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels, for display in the cab (display, etc. must be present in the tractor unit) Floor: * Approx. 50 mm softwood flooring, impregnated, protruding approx. 5–10 mm above the top edge of the frame * Steel chequer plate covers over the wheels Ramps: * 2 foldable, one-piece lightweight steel loading ramps, approx. 2,800 mm long, approx. 750 mm wide, with 35 mm

Stanje: novo, največja dovoljena obremenitev: 30.860 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpts from the equipment specifications. Full equipment details available upon request. Chassis: * Steel welded construction with front frame cranking, chamfered front corners, and rear chamfer, drive-up slope with centrally located excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed, retractable approx. 10 t lashing rings (2x on the raised platform, 1x at the front cranked slope, 3x in the low bed between the wheel recesses, 1x on the drive-up slope) 2 Pairs of Wheel Recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located at the front after the cranking, including one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between 3rd and 4th axle, including one-piece drive-over aluminium cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 - 3,600 mm, wheel diameter approx. 1,485 – 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer beam spacing) Frame Attachments: * 5 pairs of stake pockets in the outer frame for rectangular tube stakes approx. 100 x 50 x 5 mm (3x in the low-bed, 2x on the raised platform) * Low-bed platform with extendable width extensions on both sides with softwood planks approx. 50 mm (the track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distributed as follows: 1 pair at the front on the raised platform inside the longitudinal beams, 1 pair at the very rear in the excavator bucket recess left and right, 1 pair at the front on the raised platform before the cranking inside the longitudinal beams, 1 pair at the rear of the low-bed before the drive-up slope in the excavator bucket recess left and right Towing Device: * Fixed towing drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar holding spring with tensioner * Truck coupling height from approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support Device: * 2 hydraulic rear supports, operated individually, controls housed in a separate stainless-steel box Rjdpfx Ahey Auhne Hjcb Axles: * SAF air suspension low-bed axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, brand Conti HTR2 (tyre load capacity approx. 12 t/axle) Brake System/Suspension: * Brake system per ECE regulation R13, two-line pneumatic system * Brake system manufacturer Wabco EBS system 4S3M, 1st and 3rd axles sensed * RSS/RSP – stability control programme * Spring-loaded parking brake on the 3rd and 4th axles * Aluminium air tanks for total weight 44 t * Brake/air connection lines with two separate coupling heads, yellow/red * EBS/ABS connection cable * Tension rubber as holder for EBS and electrical connectors * Air suspension with lift and lowering device, operated separately at front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/safety systems: * SWIT – Schwarzmüller Intelligent Telematics Floor: * Softwood floor, approx. 50 mm, impreg

Stanje: rabljeno, največja dovoljena obremenitev: 25.660 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, Leto izdelave: 2022, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader, daily registration Extendable and telescopic – ideal for the transport of construction materials and construction machinery - As-new condition - Gross vehicle weight: 36,000 kg Unladen weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in well (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatically lockable, controlled at trailer + additional position for 40ft container in deep deck Reinforced version for transporting building materials, rated for 20 t on 5 m at the center of gravity and for construction machinery transport up to 20 t Frame suitable for transport of timber components L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads front and rear with mounting block Rcodju A Nhnepfx Ah Hsb Reinforced outer frame at gooseneck platform 6 mm Reinforced outer frame in low deck 6 mm Tapered crossbeams Movable intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stanchion crossmember for box-section stanchions 80x80 mm, and 1 pair of 5 t lash rings integrated externally in the intermediate support Frame for 2-axle tractor unit, coupling height unladen approx. 960 mm – 1,020 mm (air-suspended tractor) Front: 3 pairs and rear: 10 pairs of 10 t pull-out lashing rings in the outer frame, both sides, can also be folded outwards for oversized-width lashing 10 pairs of lashing mushrooms with welded round bar at lower outer frame Frame attachments: 10 pairs of socket housings with reinforcement for box-section stanchions 80x80 mm, both sides of the outer frame 6 stanchion crossmembers for box-section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, with lashing holes for tie-down strap, hot-dip galvanised 3 pairs of container locks in the low deck platform, retractable, for: 1 x 20ft container 1 x 30ft container 1 x 40ft container when fully extended U-profile ramp rail at rear frame end Support equipment: Mechanical steel landing gear, 2 x 12 t 2 drop-down supports, rear, both sides of frame Wheels: Tyres: 205/65 R 17.5 Steel rims: 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electropneumatic automatic reverse lock via reverse gear Last axle is steerable trailer axle Braking/Suspension: Brake system by Wabco Brake/air connectors with 2 single coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting and lowering device, total stroke approx. 200 mm Automatic levelling to programmed driving height from 15 km/h Assistance/Safety Systems: Standard reporting interval Every 15 minutes when ignition is on Every 24 hours when ignition is off Axle load indicator via EBS CAN bus signal, display in cab (truck must be appropriately enabled) Wabco SmartBoard for reading out data via display (mileage, axle module load, brake diagnosis, etc.) Floor: 35 mm larch timber floor, both sides impregnated, longitudinally laid with small gaps, over wheels with steel chequer plate covers Front wall: Fixed profiled steel front bulkhead, approx. 2,700 mm high with 2 center supports 2 front corner posts, integrated in front wall, bolted at front 2 lashing eyes each on top of the front

Stanje: novo, skupna masa: 36.700 kg, konfiguracija osi: 3 osi, Oprema: ABS, Schwarzmüller RH240 Jumbo flatbed semi-trailer low loader extendable telescopic – for building material and construction machinery transport - NEW - UNUSED - gross vehicle weight: 36,000 kg empty weight: 10,340 kg Internal length approx. 13,570 mm = Front platform length approx. 3,950 mm Rear platform length approx. 9,620 mm Platform width at lower deck approx. 2,540 mm Loading height in the low-bed area (unladen) approx. 830 mm Frame: Extendable central frame welded construction Extension length 6,000 mm Pneumatic locking, operated from the trailer plus an additional position for a 40ft container in the low-bed area Reinforced design for building material transport, rated for 20 t on 5 m at the center of gravity and for machine transport up to 20 t Frame suitable for transporting timber construction parts L/W/H approx. 13,000/575/3,200 mm Reinforced frame for point loads at the front and rear with support block Reinforced outer frame in cranked platform, 6 mm Reinforced outer frame in the low-bed area, 6 mm Tapered crossmembers Sliding intermediate support approx. 300 mm (not removable), mechanically lockable, designed as stake pocket crossmember for box section stanchions 80x80 mm, as well as 1 pair of 5 t load securing rings integrated on the outside of the intermediate support Frame suitable for 2-axle tractor unit (SZM), saddle height (unladen) approx. 960 mm – 1,020 mm with air-suspended tractor Front: 3 pairs and rear: 10 pairs of 10 t lashing rings in the extendable outer frame, on both sides, can also be folded outward for oversize load securing 10 pairs of lashing mushrooms with welded-in round steel at the bottom outer frame Frame Equipment: 10 pairs of plug-in housings with reinforcement beams for box section stanchions 80x80 mm, on both sides of the outer frame 6 stake pocket crossmembers for box section stanchions 80x80 mm 24 steel box-section stanchions 80x80x5 mm, usable height approx. 2,000 mm, top with lashing holes for straps, hot-dip galvanized 3 pairs of container locks in the low-bed platform, retractable, for 1 x 20ft container 1 x 30ft container 1 x 40ft container when extended U-profile rail for ramp installation at rear frame end Support Device: Mechanical steel landing legs, 2 x 12 t 2 drop-down supports, both sides on rear frame Wheels: Tyres 205/65 R 17.5 Steel rims 6.00 x 17.5 Axles: SAF low loader axles with drum brakes Axle lift on 1st axle Axle spacing 1,310 + 1,410 mm Friction-steered SAF trailing axle, approx. 20° steering angle, electro-pneumatic reversing lock automatically activated in reverse gear Last axle steering Brake System/Suspension: Brake system manufacturer: Wabco Brake/air connections with 2 individual coupling heads yellow/red, EBS/ABS socket at front Air suspension with lifting/lowering device, total lift approx. 200 mm Automatic adjustment to programmed ride height from 15 km/h Assistance & Safety Systems: Standard reporting interval: every 15 minutes when ignition is on every 24 hours when ignition is off Rodpju A Nilsfx Ah Hecb Axle load display via EBS-CANbus signal for display in cab (truck must be appropriately equipped) Wabco SmartBoard for data readout via display (mileage, axle load unit, brake diagnostics etc.) Floor: 35 mm larch wood flooring, impregnated on both sides, laid longitudinally with small gaps, over-wheel areas with steel chequer plate covering Front Wall: Fixed profiled steel front wall, approx. 2,700 mm high with 2 central supports 2 front corner posts

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing device ----Drawbar / Flange Hitch Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: Rcjdpfx Aerwc R Reh Hjb * Tire pressure monitoring system with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Fittings: * Landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, fitted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Bed: * 50 mm softwood floor * Provisions in front of the bulkhead for retrofitting container locks * Bolt-on 400 mm bulkhead made of smooth sheet * Removable rear stanchions, bolted * Drop sides with spring assist ----Load securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t retractable lashing rings every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the headboard and rear crossmember for 1.2 t lashing options * Profifix lashing rail centrally positioned along the longitudinal axis for securing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh drive-on ramps, approx. 2,750 x 600 mm (collapsible to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output on the truck of over 40 l/min up to max. 140 l/min) ----Painting: * Chassis, drawbar, bulkhead, mechanical drop supports and drive-on ramps hot-dip galvanized * Axles, springs, air reservoirs, landing gear front, and flange hitch eye painted in black shade * Drop sides painted in RAL 9010 pure white * Painting of the side walls in a RAL color of your choice available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Stanje: novo, največja dovoljena obremenitev: 10.800 kg, skupna masa: 14.400 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 6.270 mm, širina tovornega prostora: 2.470 mm, Leto izdelave: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalizing unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal—no in-cab installation required * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding rear support legs * Plastic toolbox approx. 858 x 500 x 500 mm, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards Rcjdpforwc R Aex Ah Hjb ----Low Loader Platform: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm smooth steel bulkhead * Bolted rear stanchions * Side walls with spring assist ----Load Securing: * Perforated outer frame, angled at approx. 45°, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross member for 1.2 t lashing points * Profifix lashing rail along the centerline for lashing capabilities up to LC 3000 daN ----Ramps: * One-piece hydraulic grating ramps, approx. 2,750 x 600 mm (can be compacted to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck of over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted in a black shade * Side wall paintwork in RAL 9010 pure white * Painting of the side walls in an RAL color of choice available at an extra charge ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images shown ----Delivery time: * Immediately available from Egestorf

Stanje: rabljeno, največja dovoljena obremenitev: 30.380 kg, skupna masa: 40.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2011, Oprema: ABS, Vehicle Identification No.: VAVX99448BH301318 Including ALU ramps – 2,800 mm long, 400 mm wide Unladen weight: 9,620 kg German MOT due Gooseneck: 4,000 mm Low-bed: Length: 8,620 mm Width: 2,550 mm Loading height: 930 mm Removable rails Support legs Width extension lighting Max. fifth wheel load at front: 12,000 kg Swing clearance radius: front 2,100 mm - rear 1,900 mm Axle loads (technical): 4 x 7,000 kg BPW Eco Plus axles with drum brakes Axle 1 = liftable Axles 3 + 4 = trailing steered 2 x toolboxes Rjdpfx Ahett U D De Hecb Tyres: 245/70 R 17.5 Changes, prior sale and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The description in the purchase contract is binding. Our offer is generally without new technical inspection (TÜV). If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops! The vehicle may be covered with advertising stickers and/or inscriptions. Our general terms and conditions of delivery and payment apply.

Stanje: rabljeno, največja dovoljena obremenitev: 17.640 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2015, naslednji pregled (TÜV): 04/2026, dolžina tovornega prostora: 8.355 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 3.600 mm, Leto izdelave: 2015, Oprema: ABS, Good condition Rjdpfx Ahey Dmuvo Hocb

Stanje: rabljeno, lastna masa: 5.100 kg, največja dovoljena obremenitev: 12.900 kg, prva registracija: 03/2014, naslednji pregled (TÜV): 04/2025, skupna dolžina: −1 mm, skupna širina: 25.500 mm, vzmetenje: jeklo-zrak, velikost pnevmatike: 245 / 70 R 17.5 / 8mm, velikost sprednje pnevmatike: 245 / 70 R 17.5 / 8mm, obratovalna teža: 18.000 kg,

Stanje: rabljeno, največja dovoljena obremenitev: 30.250 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, naslednji pregled (TÜV): 06/2025, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, skupna širina: 2.550 mm, Leto izdelave: 2014, Oprema: ABS, Schwarzmüller Platform Flatbed Semi-Trailer with Lift Axle Permissible total weight: 36,000 kg Unladen weight: 5,750 kg Payload: 30,250 kg SAF axles 1st axle lift axle Air suspension Disc brakes Side underrun protection right, left, and rear 2x storage compartments right 1x storage compartment left Rear rubber buffer 2x extendable oversize load signs front 2x extendable oversize load signs rear 2x crank support legs, operable from the right EBS (Electronic Braking System) ABS (Anti-lock Braking System) Perforated outer frame with approx. 100 mm hole spacing Wheelbase: approx. 6,350 + 1,310 + 1,310 mm External dimensions LxW: approx. 13,840 x 2,550 mm Loading area LxW: approx. 13,620 x 2,480 mm Front wall height: approx. 2,400 mm Loading height: approx. 1,250 mm Tyres: 385/65R22.5 Tread depth left front: 4 mm Tread depth left centre: 16 mm Tread depth left rear: 8 mm Tread depth right front: 5 mm Tread depth right centre: 15 mm Tread depth right rear: 10 mm Additional Features: Reinforced steel frame welded construction for point load 20 t over 4 m at centre of gravity, frame for ASH unladen 1,090–1,190 mm with air-suspended tractor unit, interchangeable 2" king pin (EC installation dimensions, corner spacing 2,040 mm) Perforated outer frame with approx. 100 mm hole spacing, elongated hole 40/25 mm according to DIN EN 12640 Air suspension with lifting and lowering device (approx. +120/-80 mm) Automatic ride height adjustment from 15 km/h SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, Ø 430 mm, 3 x 9 t rigid axles, wheelbase 2 x 1,310 mm Front axle automatically liftable = 2-side lift (1 x 96307) raises and lowers automatically based on weight (lifting the axle increases the loading or overall height by approx. 50 mm) with forced lowering including integrated speed-restricted starting aid for pushbutton operation in cab (without pushbutton fitted) 1 odometer (ECO-meter) (KIT no. 10801, with hubcap KIT no.: 52917) (on 2nd axle front right) Mechanical 2 x 12 t support winches, one-sided operation and load distribution mechanism Two-line brake system EBS-E – electronic braking system (Wabco 2S2M = one axle, 2nd axle monitored) RSS – roll stability support program Spring-loaded parking brake on 2 axles Aluminium air tank, unpainted 27 mm phenolic plywood flooring, flush with outer frame 2 steel hat profile rails over longitudinal beams, additional 12 mm phenolic overfloor, bevelled to outer frame Redswqyrhspfx Ah Hscb Fixed aluminium hollow profile front wall 2,400 mm high with 2 centre supports

Stanje: rabljeno, lastna masa: 6.090 kg, največja dovoljena obremenitev: 23.910 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2017, naslednji pregled (TÜV): 06/2026, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 970 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: rumena, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Lokacija vozila: Bovenden, 3 osi, SAF osi, vrtljiva gred, listnato vzmetenje, ABS (protiblokirni sistem), pritrdilne zanke, mehanske rampe, zadnje podpiranje, stranska aluminijasta zaščita, dvojne pnevmatike, shranjevalna skrinja Rjdey N D Ecjpfx Ah Hjcb Nadgradnja: 3-osna nizkopodno prikolica z mehanskimi rampami. Dolžina ramp 2.800 mm, zadnji nagib cca 1.000 mm. 3x10t SAF osi, bobnaste zavore, 50 mm vlečna zanka. Višina nakladanja cca 970 mm! PODATKI O DODATNI OPREMI BREZ JAMSTVA, pridržujemo si pravico do sprememb, vmesne prodaje in napak!

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Leto izdelave 2008 | Nosilec rezervnega kolesa | Škatla za palete | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Rsdpfjxx Nlwjx Ah Hjcb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVJS1339PH522406, lastna masa: 8.520 kg, največja dovoljena obremenitev: 30.480 kg, skupna masa: 39.000 kg, prva registracija: 01/2024, dolžina tovornega prostora: 13.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/55 R22.5, barva: rumena, Leto izdelave: 2024, Oprema: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL PLATFORM SEMI-TRAILER RH230 - forced-steered Vehicle identification number: VAVJS1339PH522406 Mileage: 7,700 km - Weights Gross weight (technical): 39 t Axle group load (technical): 27 t Kingpin load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Overall width max. 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm FRAME - welded steel frame construction - reinforced for 20 t load concentration over 4 m loading length - frame height at front approx. 230 mm - interchangeable 2" kingpin - frame for unladen fifth wheel height approx. 1,120 mm to 1,200 mm with air-suspended tractor unit - 4 mm perforated outer frame with hole spacing approx. 100 mm, elongated hole 50/30 mm, for lashing, 3.5 t per lashing point - 10 pairs of 5 t lashing rings, recessed in floor, foldable, also can be folded outward - 8 pairs of box section inserts with plug-in fixtures for 80x80 mm stanchions, both sides of the outer frame - 6 box section inserts with plug-in fixtures for 80x80 mm stanchions, across entire width, max. tensile force 2000 daN AXLES - BPW EcoDisc axles with disc brakes ø430 mm (22.5'' disc) - Load capacity 9 t/axle, on-road version - 1st axle rigid - 2nd and 3rd axle with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Self-acting forced steering, front fifth wheel turntable with steering wedge - Transmission via two steering rods, axle mounting at rear with bogie - Central lubrication points for steering at front fifth wheel turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on load, start-off aid with speed limitation BRAKING SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensing - RSS/RSP stability program - Spring brake parking brake on 2 axles - Aluminium air reservoirs - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at front - Air suspension with lift/lower function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for display in the driver's cab - Wabco SmartBoard for reading data via display (mileage, axle group load, brake diagnosis, etc.) FLOOR - 27 mm phenolic plywood floor with steel hat-profile rails over the longitudinal members - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminium forklift guard rail bolted both sides to the outer frame - Aluminium forklift guard rail at rear crosswise - Closed SPECIAL steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, for loads up to approx. 1 t, asymmetrical with doors on both sides - Galvanised steel toolbox / lid painted in single colour - 8 removable hardwood cross beams approx. 100/100 mm, with steel edging, can be fixed in plug-in fixtures in the outer frame Rsdpfxjxq S H Ie Ah Hjcb Very good condition, German registration papers, immediately available.

Stanje: rabljeno, Leto izdelave: 2023, barva: zelen, prostornina tovornega prostora: 11 m³, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 5.100 mm, višina nakladalnega prostora: 900 mm, prevoženi kilometri: 1.001 km, prva registracija: 01/2023, vrsta prenosa: drugo, voznikova kabina: drugo, Lokacija vozila: Bovenden, nihajna vrata. Nadgradnja: premični kontejner s zložljivimi aluminijastimi stranskimi stenami, približno 11 m³, skupna dolžina kontejnerja približno 5800 mm! Premični okvir je iz leta 2023, nadgradnja Schwarzmüller pa bistveno starejša. Natančno leto izdelave ni mogoče ugotoviti, saj ni prisotna identifikacijska tablica! PODANI PODATKI O DODATNI OPREMI SO BREZ JAMSTVA, spremembe, vmesna prodaja in napake pridržane! Rsdpfey Dvdtox Ah Hjcb

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, Oprema: ABS, Fahrzeug-Ident-Nr.: VAVKSK339MD477262 RAHMEN STAHL - MULDE ALU mit Blechboden = Eigengewicht: 5.620 kg automatisches Verdeck - Marcolin DE HU fällig - SP 07.2026 Muldenmaße: 7.600 x 2.330 x 1.650 mm Volumen: ca. 28 m³ SAF Achsen mit TROMMELBREMSEN 2 x LIFTACHSE = ACHSE 1 + 3 = LIFTACHSE WabcoSmartControl Stutzfüße kurbelbar - ALU Pendelklappe außenliegend mit Schieber Unterfahrschutz verstellbar Rcedpfx Ajx Ntvwoh Hjb Bereifung: 385/65 R 22,5 Alu-Räder Änderungen, Zwischenverkauf und Irrtümer sind ausdrücklich vorbehalten. Die Beschreibung dient der allgemeinen Identifizierung des Fahrzeuges und stellt keine Gewährleistung im kaufrechtlichen Sinne dar. Ausschlaggebend ist die Beschreibung gemäß Kaufvertrag. Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen.

Stanje: rabljeno, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2021, Oprema: ABS, Fahrzeug-Ident-Nr.: VAVKSK339MD477258 RAHMEN STAHL - MULDE ALU mit Blechboden = Eigengewicht: 5.620 kg automatisches Verdeck - Marcolin DE HU fällig - SP 04.2026 Muldenmaße: 7.600 x 2.330 x 1.650 mm Volumen: ca. 28 m³ SAF Achsen mit TROMMELBREMSEN 2 x LIFTACHSE = ACHSE 1 + 3 = LIFTACHSE Rcedpfx Aox Hb Sbeh Hjb WabcoSmartControl Stutzfüße kurbelbar - ALU Pendelklappe außenliegend mit Schieber Unterfahrschutz verstellbar Bereifung: 385/65 R 22,5 Alu-Räder Änderungen, Zwischenverkauf und Irrtümer sind ausdrücklich vorbehalten. Die Beschreibung dient der allgemeinen Identifizierung des Fahrzeuges und stellt keine Gewährleistung im kaufrechtlichen Sinne dar. Ausschlaggebend ist die Beschreibung gemäß Kaufvertrag. Unser Angebot ist generell ohne neue TÜV-Abnahme. Falls neue TÜV-Abnahme erwünscht, unterbreiten wir Ihnen gerne ein Angebot unserer Partnerwerkstätten! Fahrzeug kann mit Werbung beklebt und/oder beschriftet sein. Es gelten unsere allgemeinen Liefer- und Zahlungsbedingungen.

Stanje: rabljeno, lastna masa: 6.580 kg, največja dovoljena obremenitev: 27.420 kg, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2011, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Letnik 2011 | Nosilec rezervnega kolesa | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | Pridržujemo si pravico do napak in predhodne prodaje. Rjdpfxsx Uqxms Ah Hocb

Stanje: rabljeno, največja dovoljena obremenitev: 23.360 kg, skupna masa: 30.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, Leto izdelave: 2008, Oprema: ABS, Hidravlične preklopne dvojne rampe, razširljive Rjdpfx Ahjx Sb D Ij Hjcb Stanje: rjave lise, sicer dobro

Stanje: rabljeno, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 12/2022, dolžina tovornega prostora: 12.400 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, 4-AXLE LOW LOADER SEMITRAILER WITH CRANKED PLATFORM Tractor unit data and equipment: 3-axle tractor unit Please check saddle height under the "Dimensions" section! No modifications to the tractor unit required Please note: 5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling 1,730 mm = minimum clear front distance from fifth wheel coupling center 2,230 mm = maximum rear turning radius Tractor unit suspension type: air suspension Gross train weight (permitted): 40 t Gross weight (technical): 58 t Axle unit load (technical): 40 t Saddle load (technical): 18 t Approx. 3,500 mm = front cranked platform Approx. 7,970 mm = low bed platform – level loading area Approx. 730 mm = rear ramp slope Rcodpeu Uzv Esfx Ah Heb Overall width approx. 2,550 mm (approx. 3,000 mm with extensions) Loaded loading height approx. 870 mm Unloaded loading height approx. 900 mm With unloaded saddle height approx. 1,250 mm For combined vehicle operation, please observe legal total height and total train length limits! Welded steel construction with front inclined frame crank and rear incline (without central excavator shovel recess) 5 pairs of lashing pockets in the low bed for box stanchions 100 x 50 mm 4 pairs of lashing eyes on the outer frame 2 pairs of 5t lashing rings under the outer frame – between the axles 4 pairs of recessed 4t lashing rings on the cranked platform 7 pairs of recessed, retractable 5t lashing rings (10t technical pull force) in the low bed + 1 pair folding, between 2nd and 3rd axle 1 pair of recessed, retractable 10t lashing rings on front crank slope Pair of recessed, foldable 10t lashing rings on the inside of side member after 2nd axle 1 pair of recessed, foldable 10t lashing rings on the inside of side member after front crank Interchangeable 2" king pin 5 pairs of steel box stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion securing by pressure actuation # Permissible stanchion load 1,000 kg per stanchion with load application point 500 mm above ground Both sides of the low bed platform with extendable widening elements with 50 mm softwood planking (track width of the construction machines to be transported must not exceed outer frame width of 2,550 mm) Mechanical steel support winches, 2 x 12 t, single-sided operation (right), load compensation, manufacturer at factory’s discretion 2 hydraulic supports at rear – individually operable, controls housed in a separate stainless steel box AF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake slack adjusters Axle spacing 1,310 + 1,310 + 1,310 mm 3rd and 4th axle as stub axle/friction-steered SAF trailing axles, approx. 20° steering angle, electro-pneumatically controlled reverse lock automatically activated via reverse gear, also switchable from the cab and with release valve on the trailer Start-assist on 1st axle = speed-limited pressure relief, unloadable when loaded, actuation via button in cab Mechanical odometer mounted on 2nd axle, right side in driving direction 16 pcs. Tires 245/70 R 17.5, 146/146F (tire load capacity 12t/axle) 16 pcs. Steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12t/axle) 1 pc. Tire 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity 12t/axle) 1 pc. Steel rim 6.75 x 17.5, with offset, silver Tread depth: 10-11 mm WIT – Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package ... further details on request! Export pla

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 113 kg, največja dovoljena obremenitev: 637 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.010 mm, širina tovornega prostora: 1.060 mm, višina nakladalnega prostora: 300 mm, Leto izdelave: 2026, Scope of delivery: 1x Basic 750kg car trailer including jockey wheel 1x Mesh extension 40 cm, disassembled (assembly possible for an additional charge) Rcsdpfxsxp Ruus Ah Hjb Description: The Martz Basic 750kg car trailer is the ideal solution for all your transport needs. Whether you need to dispose of garden waste, transport building materials, or plan a move – this box trailer offers you the flexibility and durability required. With a payload of 637 kg, you can easily transport heavy loads. The loading area measures 2010 mm in length and 1060 mm in width, providing ample space for various types of goods. The trailer features a sturdy bolted steel frame for enhanced strength. The floor is made from robust phenolic plywood, ensuring longevity even during intensive use. Practical features include a jockey wheel for easy maneuvering, as well as pre-installed tarp buttons for hassle-free tarpaulin attachment. The side panels are also made from durable steel with a height of 300 mm, offering extra protection for your cargo. Equipped with a V-type drawbar and a 7-pin plug, the trailer is compatible with most vehicles. It has an overall length of 2910 mm, a total width of 1490 mm, and a total height of 800 mm, making it compact for simple storage and handling. For further versatility, the trailer comes with a 40 cm mesh extension supplied disassembled. For an additional fee of €30, the mesh extension can be completely assembled to better suit your individual requirements. Order the Basic 750kg car trailer including jockey wheel and mesh extension now to benefit from its versatility and robust design! Technical specifications: - Jockey wheel - Pre-installed tarp buttons Gross weight: 750 kg Unladen weight: 113 kg Payload: 637 kg Loading area length: 2010 mm Loading area width: 1060 mm Total width: 1490 mm Overall length: 2910 mm Overall height: 800 mm Side panel height: 300 mm Side panel material: Steel Mesh extension height: 40 cm Manufacturer: Martz Plug type: 7-pin Trailer type: Box trailer Drawbar type: V-type Floor: Phenolic plywood Frame type: Bolted Frame material: Steel Intended use: Gardening, household applications, removals/furniture transport

Stanje: rabljeno, številka stroja/vozila: 187, lastna masa: 4.950 kg, največja dovoljena obremenitev: 31.050 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2014, dolžina tovornega prostora: 7.650 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.640 mm, prostornina tovornega prostora: 28 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, Oprema: ABS, Color: RAL 6021 pale green EBS (Electronic Braking System) Disc brakes Wheelbase: 1,310 mm Floor & walls: 6 mm with Quicksilver lining Rcjdpfok Ebbzjx Ah Heb Aluminum frame BPW axles Alcoa aluminum rims electrically operated Schwarzmüller sliding roof foldable underrun protection Permissible gross weight: 36,000 kg / technically possible gross weight: 39,000 kg VIN no.: 345946 Subject to errors and prior sale.

Stanje: rabljeno, številka stroja/vozila: 157, lastna masa: 6.310 kg, največja dovoljena obremenitev: 29.690 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2016, dolžina tovornega prostora: 7.650 mm, širina tovornega prostora: 2.330 mm, višina nakladalnega prostora: 1.470 mm, prostornina tovornega prostora: 25 m³, vzmetenje: zrak, velikost pnevmatike: 385/65 r22,5, barva: zelen, Oprema: ABS, Disc brake EBS Wheelbase 1,310 mm Floor 5 mm - Wall 4 mm Hydraulic tailgate, pendulum-mounted BPW axles Alcoa aluminium rims Electric Cramaro sliding roof Folding underrun protection Perm. total weight 36,000 kg / technically possible total weight 39,000 kg Rcodji Ehy Espfx Ah Hjb VIN: 377690 Subject to errors and omissions

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: VAVYS1339RD526996, lastna masa: 5.910 kg, največja dovoljena obremenitev: 30.090 kg, skupna masa: 36.000 kg, konfiguracija osi: 4x2, prva registracija: 07/2024, dolžina tovornega prostora: 13.000 mm, širina tovornega prostora: 2.500 mm, vzmetenje: zrak, velikost pnevmatike: 385/65 R 22,5, barva: črn, Leto izdelave: 2024, Oprema: ABS, our vehicle number #30370 3x SAF axles Tyre size 385/65 R 22.5 Permissible gross weight 36,000 kg Payload 30,090 kg Unladen weight 5,910 kg Body dimensions inside L: 13,000 mm W: 2,500 mm Colour: black Lifting axle Disc brakes 8 pairs of Eco stanchions 8 pairs of lashing brackets Front wall height 2,500 mm air suspension SWIT – Schwarzmüller Intelligent Telematics reinforced axles side underrun protection spare wheel holder toolbox Jost landing legs 5x towing hooks at the rear floor plate LED tail lights ABS EBS Rcodpfjwuq Ibox Ah Hob Financing available upon request!!!

Stanje: rabljeno, največja dovoljena obremenitev: 33.780 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2019, skupna širina: 2.550 mm, skupna višina: 4.000 mm, Oprema: ABS, Schwarzmüller priklopnik za prevoz lesa s sedlom in stebrički * BPW osi z zračnim vzmetenjem in kolutnimi zavorami Redpfx Aoyld U Ioh Hscb * 1. os dvignljiva * Nosilec za rezervno kolo * Pneumatike 385/65R22,5 * Aluminijasta platišča * Delovne luči * 2x shranjevalni prostor * Jost podporne noge Za dodatne informacije smo vam na voljo.

Stanje: rabljeno, lastna masa: 7.660 kg, največja dovoljena obremenitev: 33.840 kg, skupna masa: 41.500 kg, konfiguracija osi: 3 osi, prva registracija: 02/2001, dolžina tovornega prostora: 12.800 mm, širina tovornega prostora: 2.520 mm, višina nakladalnega prostora: 920 mm, skupna dolžina: 2.550 mm, skupna širina: 2.800 mm, vzmetenje: zrak, velikost pnevmatike: 235 / 75 R 17,5, barva: črn, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Oprema: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, 1st axle liftable, last axle self-steering, raise/lower function, ABS (anti-lock braking system), lashing rings, support legs, twin tyres, storage box. Fifth wheel height 1350 mm, loading height 920 mm, loading length over axles approx. 8,700 mm, loading length over king pin approx. 4,000 mm, gooseneck height approx. 625 mm, preparation for revolving beacon, 800 mm fold-down side walls, 6 pairs of lashing brackets on the outer frame of the low bed, 6 x twist locks on the loading area, extendable warning panels at the front and rear up to 3,500 mm, fifth wheel position from front wall to king pin 1,750 mm, approx. EUR 3,000 invested in maintenance! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Rjdpfowcpcgox Ah Hecb