Prekucnik

Schwarzmüller SK Stahlrundmulde mit hydr. Heckklappe

Stanje: novo, prevoženi kilometri: 100 km, moč: 324 kW (440,52 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, dolžina tovornega prostora: 8.900 mm, širina tovornega prostora: 2.550 mm, višina nakladalnega prostora: 1.050 mm, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, Brand new MAN 26.440 TGX 6x2-4 LL, configured as a transporter for construction machinery and aerial work platforms. Truck Specifications: - Long-distance driver’s cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED rear lights - Euro 6e - Automatic transmission - Sun visor - Warning beacons - Reversing camera - Multifunction steering wheel - 1 bunk bed - Refrigerator - Media system with navigation - Flatbed body – 100 km – 324 kW (441 hp) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (green emissions badge) - 26,000 kg GVW - Automatic climate control - White – Long-distance specification – etc. Body - Structure made from laser-cut and folded special profiles in low-bed design - Platform length approx. 8,850 mm - Frame height unladen approx. 1,050 mm - Frame width approx. 2,550 mm - 2 stretch ramps, each ramp with 1 fixed section and 1 extendable section, ramps laterally adjustable - Ramp deck made of grid flooring, mechanical ramp locking including holder on outer frame when not in use (optional securing with straps) Nedpfx Aboxqkayj Ujkw - Ramps powered by electro-hydraulic unit, including emergency operation on control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions controlled via remote control - Grid floor with increased load capacity - Rear with bevel – front bulkhead approx. 2,000 mm high with profiles bent inward - Stainless steel toolbox inside, in front of the bulkhead - 2 stainless steel toolboxes mounted laterally on the frame for lashing equipment (1 left, 1 right) - 1 stainless steel toolbox at rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear wall of cab, 2 pairs on sides of frame, 2 pairs at rear - 2 steps for access to the cargo area Load Securing: - Longitudinal member incl. Multi-X contour with lashing points, 2.5 t - 6 pairs of 6 t lashing points integrated into the longitudinal member - Outer frame perforated with 2.5 t lashing points - 6 pairs of 6 t lashing points in the outer frame - 4 pieces of 6 t lashing points at the rear - 4 pieces of 6 t lashing points below, in front of the front toolbox Painting: - Body KTL powder-coated in RAL 9005 black - Bulkhead painted in RAL 9005 black - Ramps and grid flooring hot-dip galvanized Markings: - Reflective tape according to EU standards, on sides and rear. Further information available upon request.

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, with vehicles available immediately and at short notice, on our website. Selection of equipment features. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm, with rear chamfer approx. 1,000 mm x 10° Njdsyhkrfopfx Ab Ujkw * For tractor units: 4 x 2, 6 x 2 and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit to control hydraulic functions, except for hydraulic winches * On the gooseneck: 1 pair of removable ALU side walls, approx. 400 mm high, anodized * On the gooseneck: removable ALU rear wall, approx. 400 mm high, anodized * Over the gooseneck: approx. 40 mm hardwood floor, over the kingpin area with tread plate covering * 2-inch kingpin LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° * Recess in the loading platform and chamfer section to accommodate excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck is done via the standardized EBS interface per ISO 11992. For correct display, the truck must be able to transmit and display this data * TPMS tire pressure sensors installed in all wheels * BPW axles and suspension, 1st axle steering, all other axles hydro-mechanically steered * 1st axle with electromagnetically operated reverse gear lock, can be activated via reverse gear or manually * Technical axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * Axle tool kit * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load capacity ≈ 50,000 kg * 245/70 R 17.5 3PMSF twin tires. Manufacturer of our choice, load index 143/141J (146/146F) * Loading platform features continuous and inter-axle interrupted approx. 50 mm thick hardwood flooring (increases friction coefficient) * Platform locking with conically welded locking profiles approx. every 250 mm. Includes tensioning plate * 1 intermediate table, approx. 300 mm wide, for telescopic tube with large cross-section * Intermediate table with stepped loading area and extendable suspension rails for ALU bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 8 pairs of flush-mounted lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * Extendable (galvanized) platform width extensions, approx. 230 mm each side (excluding timber boards) * Wheel wells with 15 x 15 mm square climbing strips ahead of the axles, open continuously up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells that can also be used as bridging elements for the extension OR as width extension boards (when vehicle is equipped with width extensions) * Wheel wells with 15 x 15 mm square climbing strips between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports * Remote-controlled steering from front and rear via cable remote, with single-track alignment of axles HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-KG-HV-M: A pair of two-piece steel ramps approx. 4,350 mm long and approx. 900 mm wide

Stanje: rabljeno, največja dovoljena obremenitev: 28.100 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2016, dolžina tovornega prostora: 13.640 mm, širina tovornega prostora: 2.410 mm, Oprema: ABS, id: 015357 DVIŽNA OS Za več informacij pokličite: , +????? Za več informacij pokličite: 420734511212 Nkodpfx Abox In U Se Uow