Polpriklopnik z nizko nakladalno ploščadjo

SCHWARZMÜLLER *F-Serie*Tieflader*gekröpft*pen

4-AXLE LOW LOADER SEMITRAILER WITH CRANKED PLATFORM

Tractor unit data and equipment:
3-axle tractor unit
Please check saddle height under the "Dimensions" section!
No modifications to the tractor unit required
Please note:
5,000 mm = maximum distance from front of tractor unit to center of fifth wheel coupling
1,730 mm = minimum clear front distance from fifth wheel coupling center
2,230 mm = maximum rear turning radius
Tractor unit suspension type: air suspension

Gross train weight (permitted): 40 t
Gross weight (technical): 58 t
Axle unit load (technical): 40 t
Saddle load (technical): 18 t

Approx. 3,500 mm = front cranked platform
Approx. 7,970 mm = low bed platform – level loading area
Nkjdju Uzv Eopfx Ab Ujw
Approx. 730 mm = rear ramp slope
Overall width approx. 2,550 mm (approx. 3,000 mm with extensions)
Loaded loading height approx. 870 mm
Unloaded loading height approx. 900 mm
With unloaded saddle height approx. 1,250 mm
For combined vehicle operation, please observe legal total height and total train length limits!

Welded steel construction with front inclined frame crank and rear incline (without central excavator shovel recess)
5 pairs of lashing pockets in the low bed for box stanchions 100 x 50 mm
4 pairs of lashing eyes on the outer frame
2 pairs of 5t lashing rings under the outer frame – between the axles
4 pairs of recessed 4t lashing rings on the cranked platform
7 pairs of recessed, retractable 5t lashing rings (10t technical pull force) in the low bed
+ 1 pair folding, between 2nd and 3rd axle
1 pair of recessed, retractable 10t lashing rings on front crank slope
Pair of recessed, foldable 10t lashing rings on the inside of side member after 2nd axle
1 pair of recessed, foldable 10t lashing rings on the inside of side member after front crank
Interchangeable 2" king pin
5 pairs of steel box stanchions 100x50x5 mm, usable height approx. 1,000 mm, hot-dip galvanized, stanchion securing by pressure actuation
# Permissible stanchion load 1,000 kg per stanchion with load application point 500 mm above ground
Both sides of the low bed platform with extendable widening elements with 50 mm softwood planking (track width of the construction machines to be transported must not exceed outer frame width of 2,550 mm)
Mechanical steel support winches, 2 x 12 t, single-sided operation (right), load compensation, manufacturer at factory’s discretion
2 hydraulic supports at rear – individually operable, controls housed in a separate stainless steel box
AF air-suspension low loader axles with drum brakes, load capacity 11 t/axle, S-cam brake 300/200 mm, automatic brake slack adjusters
Axle spacing 1,310 + 1,310 + 1,310 mm
3rd and 4th axle as stub axle/friction-steered SAF trailing axles, approx. 20° steering angle, electro-pneumatically controlled reverse lock automatically activated via reverse gear, also switchable from the cab and with release valve on the trailer
Start-assist on 1st axle = speed-limited pressure relief, unloadable when loaded, actuation via button in cab
Mechanical odometer mounted on 2nd axle, right side in driving direction
16 pcs. Tires 245/70 R 17.5, 146/146F (tire load capacity 12t/axle)
16 pcs. Steel rims 6.75 x 17.5, with offset, silver (tire load capacity 12t/axle)
1 pc. Tire 245/70 R 17.5, 146/146F, make: Conti HTR2 (tire load capacity 12t/axle)
1 pc. Steel rim 6.75 x 17.5, with offset, silver

Tread depth: 10-11 mm

WIT – Schwarzmüller Intelligent Telematics, "LOCAL TRAC" package

... further details on request!

Export pla

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.